gdb/

	* infrun.c (sched_multi): New global.
	(resume): If sched_multi is set, resume only threads of the
	current inferior.
	(prepare_to_proceed): Don't switch over to wait_ptid if we're
	resuming a different inferior, and sched_multi is off.
	(show_schedule_multiple): New.
	(_initialize_infrun): Register new "set schedule-multiple" command.
	* inferior.h (sched_multi): Declare.
	* NEWS: Mention new "schedule-multiple" setting.
gdb/doc/
	* gdb.texinfo (All-Stop): Document new 'set schedule-multiple'
	command.

6 files changed, 106 insertions, 10 deletions

diff --git a/gdb/ChangeLog b/gdb/ChangeLog
index 5b23ea7..b296122 100644
--- a/gdb/ChangeLog
+++ b/gdb/ChangeLog
@@ -1,5 +1,17 @@
 2009-06-11  Pedro Alves  <pedro@codesourcery.com>
 
+	* infrun.c (sched_multi): New global.
+	(resume): If sched_multi is set, resume only threads of the
+	current inferior.
+	(prepare_to_proceed): Don't switch over to wait_ptid if we're
+	resuming a different inferior, and sched_multi is off.
+	(show_schedule_multiple): New.
+	(_initialize_infrun): Register new "set schedule-multiple" command.
+	* inferior.h (sched_multi): Declare.
+	* NEWS: Mention new "schedule-multiple" setting.
+
+2009-06-11  Pedro Alves  <pedro@codesourcery.com>
+
 	* varobj.c (varobj_create): Properly restore the selected frame.
 
 2009-06-05  Tom Tromey  <tromey@redhat.com>
diff --git a/gdb/NEWS b/gdb/NEWS
index d018885..9806532 100644
--- a/gdb/NEWS
+++ b/gdb/NEWS
@@ -305,6 +305,11 @@ show libthread-db-search-path
   Control list of directories which GDB will search for appropriate
   libthread_db.
 
+set schedule-multiple (on|off)
+show schedule-multiple
+  Allow GDB to resume all threads of all processes or only threads of
+  the current process.
+
 * New native configurations
 
 x86/x86_64 Darwin		i[34567]86-*-darwin*
diff --git a/gdb/doc/ChangeLog b/gdb/doc/ChangeLog
index d4c574a..ff1ffd0 100644
--- a/gdb/doc/ChangeLog
+++ b/gdb/doc/ChangeLog
@@ -1,3 +1,8 @@
+2009-06-11  Pedro Alves  <pedro@codesourcery.com>
+
+	* gdb.texinfo (All-Stop): Document new 'set schedule-multiple'
+	command.
+
 2009-06-07  Pedro Alves  <pedro@codesourcery.com>
 
 	* gdbint.texinfo (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete all
diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo
index 6f5fb9a..c4459e3 100644
--- a/gdb/doc/gdb.texinfo
+++ b/gdb/doc/gdb.texinfo
@@ -4650,6 +4650,36 @@ the current thread away from the thread that you are debugging.
 Display the current scheduler locking mode.
 @end table
 
+@cindex resume threads of multiple processes simultaneously
+By default, when you issue one of the execution commands such as
+@code{continue}, @code{next} or @code{step}, @value{GDBN} allows only
+threads of the current inferior to run.  For example, if @value{GDBN}
+is attached to two inferiors, each with two threads, the
+@code{continue} command resumes only the two threads of the current
+inferior.  This is useful, for example, when you debug a program that
+forks and you want to hold the parent stopped (so that, for instance,
+it doesn't run to exit), while you debug the child.  In other
+situations, you may not be interested in inspecting the current state
+of any of the processes @value{GDBN} is attached to, and you may want
+to resume them all until some breakpoint is hit.  In the latter case,
+you can instruct @value{GDBN} to allow all threads of all the
+inferiors to run with the @w{@code{set schedule-multiple}} command.
+
+@table @code
+@kindex set schedule-multiple
+@item set schedule-multiple
+Set the mode for allowing threads of multiple processes to be resumed
+when an execution command is issued.  When @code{on}, all threads of
+all processes are allowed to run.  When @code{off}, only the threads
+of the current process are resumed.  The default is @code{off}.  The
+@code{scheduler-locking} mode takes precedence when set to @code{on},
+or while you are stepping and set to @code{step}.
+
+@item show schedule-multiple
+Display the current mode for resuming the execution of threads of
+multiple processes.
+@end table
+
 @node Non-Stop Mode
 @subsection Non-Stop Mode
 
diff --git a/gdb/inferior.h b/gdb/inferior.h
index 60d5913..31764d2 100644
--- a/gdb/inferior.h
+++ b/gdb/inferior.h
@@ -135,6 +135,8 @@ extern void clear_proceed_status (void);
 
 extern void proceed (CORE_ADDR, enum target_signal, int);
 
+extern int sched_multi;
+
 /* When set, stop the 'step' command if we enter a function which has
    no line number information.  The normal behavior is that we step
    over such function.  */
diff --git a/gdb/infrun.c b/gdb/infrun.c
index 885e325..a3cbd74 100644
--- a/gdb/infrun.c
+++ b/gdb/infrun.c
@@ -1091,6 +1091,11 @@ set_schedlock_func (char *args, int from_tty, struct cmd_list_element *c)
     }
 }
 
+/* True if execution commands resume all threads of all processes by
+   default; otherwise, resume only threads of the current inferior
+   process.  */
+int sched_multi = 0;
+
 /* Try to setup for software single stepping over the specified location.
    Return 1 if target_resume() should use hardware single step.
 
@@ -1201,13 +1206,25 @@ a command like `return' or `jump' to continue execution."));
     {
       ptid_t resume_ptid;
 
-      resume_ptid = RESUME_ALL;	/* Default */
-
       /* If STEP is set, it's a request to use hardware stepping
 	 facilities.  But in that case, we should never
 	 use singlestep breakpoint.  */
       gdb_assert (!(singlestep_breakpoints_inserted_p && step));
 
+      /* Decide the set of threads to ask the target to resume.  Start
+	 by assuming everything will be resumed, than narrow the set
+	 by applying increasingly restricting conditions.  */
+
+      /* By default, resume all threads of all processes.  */
+      resume_ptid = RESUME_ALL;
+
+      /* Maybe resume only all threads of the current process.  */
+      if (!sched_multi && target_supports_multi_process ())
+	{
+	  resume_ptid = pid_to_ptid (ptid_get_pid (inferior_ptid));
+	}
+
+      /* Maybe resume a single thread after all.  */
       if (singlestep_breakpoints_inserted_p
 	  && stepping_past_singlestep_breakpoint)
 	{
@@ -1224,9 +1241,8 @@ a command like `return' or `jump' to continue execution."));
 	     to support, and has no value.  */
 	  resume_ptid = inferior_ptid;
 	}
-
-      if ((step || singlestep_breakpoints_inserted_p)
-	  && tp->trap_expected)
+      else if ((step || singlestep_breakpoints_inserted_p)
+	       && tp->trap_expected)
 	{
 	  /* We're allowing a thread to run past a breakpoint it has
 	     hit, by single-stepping the thread with the breakpoint
@@ -1240,8 +1256,7 @@ a command like `return' or `jump' to continue execution."));
 	     breakpoint, not just the one at PC.  */
 	  resume_ptid = inferior_ptid;
 	}
-
-      if (non_stop)
+      else if (non_stop)
 	{
 	  /* With non-stop mode on, threads are always handled
 	     individually.  */
@@ -1394,11 +1409,19 @@ prepare_to_proceed (int step)
 		       || (scheduler_mode == schedlock_step
 			   && step));
 
+  /* Don't switch over to WAIT_PTID if scheduler locking is on.  */
+  if (schedlock_enabled)
+    return 0;
+
+  /* Don't switch over if we're about to resume some other process
+     other than WAIT_PTID's, and schedule-multiple is off.  */
+  if (!sched_multi
+      && ptid_get_pid (wait_ptid) != ptid_get_pid (inferior_ptid))
+    return 0;
+
   /* Switched over from WAIT_PID.  */
   if (!ptid_equal (wait_ptid, minus_one_ptid)
-      && !ptid_equal (inferior_ptid, wait_ptid)
-      /* Don't single step WAIT_PID if scheduler locking is on.  */
-      && !schedlock_enabled)
+      && !ptid_equal (inferior_ptid, wait_ptid))
     {
       struct regcache *regcache = get_thread_regcache (wait_ptid);
 
@@ -5567,6 +5590,13 @@ show_non_stop (struct ui_file *file, int from_tty,
 		    value);
 }
 
+static void
+show_schedule_multiple (struct ui_file *file, int from_tty,
+			struct cmd_list_element *c, const char *value)
+{
+  fprintf_filtered (file, _("\
+Resuming the execution of threads of all processes is %s.\n"), value);
+}
 
 void
 _initialize_infrun (void)
@@ -5746,6 +5776,18 @@ step == scheduler locked during every single-step operation.\n\
 			show_scheduler_mode,
 			&setlist, &showlist);
 
+  add_setshow_boolean_cmd ("schedule-multiple", class_run, &sched_multi, _("\
+Set mode for resuming threads of all processes."), _("\
+Show mode for resuming threads of all processes."), _("\
+When on, execution commands (such as 'continue' or 'next') resume all\n\
+threads of all processes.  When off (which is the default), execution\n\
+commands only resume the threads of the current process.  The set of\n\
+threads that are resumed is further refined by the scheduler-locking\n\
+mode (see help set scheduler-locking)."),
+			   NULL,
+			   show_schedule_multiple,
+			   &setlist, &showlist);
+
   add_setshow_boolean_cmd ("step-mode", class_run, &step_stop_if_no_debug, _("\
 Set mode of the step operation."), _("\
 Show mode of the step operation."), _("\