* nm-*, xm-*, tm-*: All native, host, and target files, which

	get linked to nm.h, xm.h, and tm.h respectively by configure,
	moved to appropriate config/<cpu> subdirectory.
	* nm-sysv4.h, xm-sysv4.h, tm-sysv4.h, tm-sunos.h, nm-trash.h:
	Native, host, and target files that are common across more than
	one cpu architecture and included by one of the configured
	native, host, or target files, get moved to config directory.

1 files changed, 0 insertions, 202 deletions

diff --git a/gdb/xm-altos.h b/gdb/xm-altos.h
deleted file mode 100644
index ea84016..0000000
--- a/gdb/xm-altos.h
+++ /dev/null
@@ -1,202 +0,0 @@
-/* Definitions to make GDB run on an Altos 3068 (m68k running SVR2)
-   Copyright (C) 1987,1989 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-#define HOST_BYTE_ORDER BIG_ENDIAN
-
-/* The altos support would make a good base for a port to other USGR2 systems
-   (like the 3b1 and the Convergent miniframe).  */
-
-/* This is only needed in one file, but it's cleaner to put it here than
-   putting in more #ifdef's.  */
-#include <sys/page.h>
-#include <sys/net.h>
-
-#define USG
-
-#define HAVE_TERMIO
-
-#define CBREAK XTABS	/* It takes all kinds... */
-
-#ifndef R_OK
-#define R_OK 4
-#define W_OK 2
-#define X_OK 1
-#define F_OK 0
-#endif
-
-/* Get sys/wait.h ie. from a Sun and edit it a little (mc68000 to m68k) */
-/* Why bother?  */
-#if 0
-#define HAVE_WAIT_STRUCT
-#endif
-
-/* This is the amount to subtract from u.u_ar0
-   to get the offset in the core file of the register values. */
-
-#define KERNEL_U_ADDR 0x1fbf000
-
-#define REGISTER_U_ADDR(addr, blockend, regno)		\
-{	if (regno <= SP_REGNUM) \
-	  addr = blockend + regno * 4; \
-	else if (regno == PS_REGNUM) \
-	  addr = blockend + regno * 4 + 4; \
-	else if (regno == PC_REGNUM) \
-	  addr = blockend + regno * 4 + 2; \
-}
-
-#define REGISTER_ADDR(u_ar0, regno)					\
-  (((regno) < PS_REGNUM)						\
-   ? (&((struct exception_stack *) (u_ar0))->e_regs[(regno + R0)])	\
-   : (((regno) == PS_REGNUM)						\
-      ? ((int *) (&((struct exception_stack *) (u_ar0))->e_PS))		\
-      : (&((struct exception_stack *) (u_ar0))->e_PC)))
-
-#define FP_REGISTER_ADDR(u, regno)					\
-  (((char *)								\
-    (((regno) < FPC_REGNUM)						\
-     ? (&u.u_pcb.pcb_mc68881[FMC68881_R0 + (((regno) - FP0_REGNUM) * 3)]) \
-     : (&u.u_pcb.pcb_mc68881[FMC68881_C + ((regno) - FPC_REGNUM)])))	\
-   - ((char *) (& u)))
-
-
-#ifndef __GNUC__
-#undef USE_GAS
-#define ALTOS_AS
-#else
-#define USE_GAS
-#endif
-
-/* Motorola assembly format */
-#if !defined(USE_GAS) && !defined(ALTOS)
-#define MOTOROLA
-#endif
-
-/* Interface definitions for kernel debugger KDB.  */
-
-/* Map machine fault codes into signal numbers.
-   First subtract 0, divide by 4, then index in a table.
-   Faults for which the entry in this table is 0
-   are not handled by KDB; the program's own trap handler
-   gets to handle then.  */
-
-#define FAULT_CODE_ORIGIN 0
-#define FAULT_CODE_UNITS 4
-#define FAULT_TABLE    \
-{ 0, 0, 0, 0, SIGTRAP, 0, 0, 0, \
-  0, SIGTRAP, 0, 0, 0, 0, 0, SIGKILL, \
-  0, 0, 0, 0, 0, 0, 0, 0, \
-  SIGILL }
-
-/* Start running with a stack stretching from BEG to END.
-   BEG and END should be symbols meaningful to the assembler.
-   This is used only for kdb.  */
-
-#ifdef MOTOROLA
-#define INIT_STACK(beg, end)  \
-{ asm (".globl end");         \
-  asm ("move.l $ end, sp");      \
-  asm ("clr.l fp"); }
-#else
-#ifdef ALTOS_AS
-#define INIT_STACK(beg, end)  \
-{ asm ("global end");         \
-  asm ("mov.l &end,%sp");      \
-  asm ("clr.l %fp"); }
-#else
-#define INIT_STACK(beg, end)  \
-{ asm (".globl end");         \
-  asm ("movel $ end, sp");      \
-  asm ("clrl fp"); }
-#endif
-#endif
-
-/* Push the frame pointer register on the stack.  */
-#ifdef MOTOROLA
-#define PUSH_FRAME_PTR        \
-  asm ("move.l fp, -(sp)");
-#else
-#ifdef ALTOS_AS
-#define PUSH_FRAME_PTR        \
-  asm ("mov.l %fp, -(%sp)");
-#else
-#define PUSH_FRAME_PTR        \
-  asm ("movel fp, -(sp)");
-#endif
-#endif
-
-/* Copy the top-of-stack to the frame pointer register.  */
-#ifdef MOTOROLA
-#define POP_FRAME_PTR  \
-  asm ("move.l (sp), fp");
-#else
-#ifdef ALTOS_AS
-#define POP_FRAME_PTR  \
-  asm ("mov.l (%sp), %fp");
-#else
-#define POP_FRAME_PTR  \
-  asm ("movl (sp), fp");
-#endif
-#endif
-
-/* After KDB is entered by a fault, push all registers
-   that GDB thinks about (all NUM_REGS of them),
-   so that they appear in order of ascending GDB register number.
-   The fault code will be on the stack beyond the last register.  */
-
-#ifdef MOTOROLA
-#define PUSH_REGISTERS        \
-{ asm ("clr.w -(sp)");	      \
-  asm ("pea (10,sp)");	      \
-  asm ("movem $ 0xfffe,-(sp)"); }
-#else
-#ifdef ALTOS_AS
-#define PUSH_REGISTERS        \
-{ asm ("clr.w -(%sp)");	      \
-  asm ("pea (10,%sp)");	      \
-  asm ("movm.l &0xfffe,-(%sp)"); }
-#else
-#define PUSH_REGISTERS        \
-{ asm ("clrw -(sp)");	      \
-  asm ("pea 10(sp)");	      \
-  asm ("movem $ 0xfffe,-(sp)"); }
-#endif
-#endif
-
-/* Assuming the registers (including processor status) have been
-   pushed on the stack in order of ascending GDB register number,
-   restore them and return to the address in the saved PC register.  */
-
-#ifdef MOTOROLA
-#define POP_REGISTERS          \
-{ asm ("subi.l $8,28(sp)");     \
-  asm ("movem (sp),$ 0xffff"); \
-  asm ("rte"); }
-#else
-#ifdef ALTOS_AS
-#define POP_REGISTERS          \
-{ asm ("sub.l &8,28(%sp)");     \
-  asm ("movem (%sp),&0xffff"); \
-  asm ("rte"); }
-#else
-#define POP_REGISTERS          \
-{ asm ("subil $8,28(sp)");     \
-  asm ("movem (sp),$ 0xffff"); \
-  asm ("rte"); }
-#endif
-#endif