Johns release

1 files changed, 364 insertions, 0 deletions

diff --git a/gdb/tm-merlin.h b/gdb/tm-merlin.h
new file mode 100644
index 0000000..91475c8
--- /dev/null
+++ b/gdb/tm-merlin.h
@@ -0,0 +1,364 @@
+/* Definitions to target GDB to a merlin under utek 2.1
+   Copyright (C) 1986, 1987, 1989 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+GDB is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 1, or (at your option)
+any later version.
+
+GDB is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GDB; see the file COPYING.  If not, write to
+the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+#define TARGET_BYTE_ORDER LITTLE_ENDIAN
+
+/* I don't know if this will work for cross-debugging, even if you do get
+   a copy of the right include file.  */
+#include <machine/reg.h>
+
+/* Define this if the C compiler puts an underscore at the front
+   of external names before giving them to the linker.  */
+
+#define NAMES_HAVE_UNDERSCORE
+
+/* Debugger information will be in DBX format.  */
+
+#define READ_DBX_FORMAT
+
+/* Offset from address of function to start of its code.
+   Zero on most machines.  */
+
+#define FUNCTION_START_OFFSET 0
+
+/* Advance PC across any function entry prologue instructions
+   to reach some "real" code.  */
+
+#define SKIP_PROLOGUE(pc)   				\
+{ register int op = read_memory_integer (pc, 1);	\
+  if (op == 0x82)					\
+    { op = read_memory_integer (pc+2,1);		\
+      if ((op & 0x80) == 0) pc += 3;			\
+      else if ((op & 0xc0) == 0x80) pc += 4;		\
+      else pc += 6;					\
+    }}
+
+/* Immediately after a function call, return the saved pc.
+   Can't always go through the frames for this because on some machines
+   the new frame is not set up until the new function executes
+   some instructions.  */
+
+#define SAVED_PC_AFTER_CALL(frame) \
+	read_memory_integer (read_register (SP_REGNUM), 4)
+
+/* Address of end of stack space.  */
+
+#define STACK_END_ADDR (0x800000)
+
+/* Stack grows downward.  */
+
+#define INNER_THAN <
+
+/* Sequence of bytes for breakpoint instruction.  */
+
+#define BREAKPOINT {0xf2}
+
+/* Amount PC must be decremented by after a breakpoint.
+   This is often the number of bytes in BREAKPOINT
+   but not always.  */
+
+#define DECR_PC_AFTER_BREAK 0
+
+/* Nonzero if instruction at PC is a return instruction.  */
+
+#define ABOUT_TO_RETURN(pc) (read_memory_integer (pc, 1) == 0x12)
+
+/* Return 1 if P points to an invalid floating point value.  */
+
+#define INVALID_FLOAT(p, len) 0
+
+/* Define this to say that the "svc" insn is followed by
+   codes in memory saying which kind of system call it is.  */
+
+#define NS32K_SVC_IMMED_OPERANDS
+
+/* Say how long (ordinary) registers are.  */
+
+#define REGISTER_TYPE long
+
+/* Number of machine registers */
+
+#define NUM_REGS		25
+
+#define NUM_GENERAL_REGS	8
+
+/* Initializer for an array of names of registers.
+   There should be NUM_REGS strings in this initializer.  */
+
+#define REGISTER_NAMES {"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",	\
+			"pc", "sp", "fp", "ps",				\
+ 			"fsr",						\
+ 			"f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",	\
+			"l0", "l1", "l2", "l3", "l4",			\
+ 			}
+
+/* Register numbers of various important registers.
+   Note that some of these values are "real" register numbers,
+   and correspond to the general registers of the machine,
+   and some are "phony" register numbers which are too large
+   to be actual register numbers as far as the user is concerned
+   but do serve to get the desired values when passed to read_register.  */
+
+#define AP_REGNUM FP_REGNUM
+#define FP_REGNUM 10		/* Contains address of executing stack frame */
+#define SP_REGNUM 9		/* Contains address of top of stack */
+#define PC_REGNUM 8		/* Contains program counter */
+#define PS_REGNUM 11		/* Contains processor status */
+#define FPS_REGNUM 12		/* Floating point status register */
+#define FP0_REGNUM 13		/* Floating point register 0 */
+#define LP0_REGNUM 21		/* Double register 0 (same as FP0) */
+
+/* Total amount of space needed to store our copies of the machine's
+   register state, the array `registers'.  */
+#define REGISTER_BYTES ((NUM_REGS - 4) * sizeof (int) + 4 * sizeof (double))
+
+/* Index within `registers' of the first byte of the space for
+   register N.  */
+
+#define REGISTER_BYTE(N) ((N) >= LP0_REGNUM ? \
+	LP0_REGNUM * 4 + ((N) - LP0_REGNUM) * 8 : (N) * 4)
+
+/* Number of bytes of storage in the actual machine representation
+   for register N.  On the 32000, all regs are 4 bytes
+   except for the doubled floating registers. */
+
+#define REGISTER_RAW_SIZE(N) ((N) >= LP0_REGNUM ? 8 : 4)
+
+/* Number of bytes of storage in the program's representation
+   for register N.  On the 32000, all regs are 4 bytes
+   except for the doubled floating registers. */
+
+#define REGISTER_VIRTUAL_SIZE(N) ((N) >= LP0_REGNUM ? 8 : 4)
+
+/* Largest value REGISTER_RAW_SIZE can have.  */
+
+#define MAX_REGISTER_RAW_SIZE 8
+
+/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
+
+#define MAX_REGISTER_VIRTUAL_SIZE 8
+
+/* Nonzero if register N requires conversion
+   from raw format to virtual format.  */
+
+#define REGISTER_CONVERTIBLE(N) 0
+
+/* Convert data from raw format for register REGNUM
+   to virtual format for register REGNUM.  */
+
+#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,FROM,TO)	\
+  bcopy ((FROM), (TO), REGISTER_VIRTUAL_SIZE(REGNUM));
+
+/* Convert data from virtual format for register REGNUM
+   to raw format for register REGNUM.  */
+
+#define REGISTER_CONVERT_TO_RAW(REGNUM,FROM,TO)	\
+  bcopy ((FROM), (TO), REGISTER_VIRTUAL_SIZE(REGNUM));
+
+/* Return the GDB type object for the "standard" data type
+   of data in register N.  */
+
+#define REGISTER_VIRTUAL_TYPE(N) \
+  ((N) >= FP0_REGNUM ?		\
+    ((N) >= LP0_REGNUM ?	\
+     builtin_type_double	\
+     : builtin_type_float)	\
+   : builtin_type_int)	
+
+/* Store the address of the place in which to copy the structure the
+   subroutine will return.  This is called from call_function.
+
+   On this machine this is a no-op, as gcc doesn't run on it yet.
+   This calling convention is not used. */
+
+#define STORE_STRUCT_RETURN(ADDR, SP)
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  */
+
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+  bcopy (REGBUF, VALBUF, TYPE_LENGTH (TYPE))
+
+/* Write into appropriate registers a function return value
+   of type TYPE, given in virtual format.  */
+
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+  write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE))
+
+/* Extract from an array REGBUF containing the (raw) register state
+   the address in which a function should return its structure value,
+   as a CORE_ADDR (or an expression that can be used as one).  */
+
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(int *)(REGBUF))
+
+/* Describe the pointer in each stack frame to the previous stack frame
+   (its caller).  */
+
+/* FRAME_CHAIN takes a frame's nominal address
+   and produces the frame's chain-pointer.
+
+   FRAME_CHAIN_COMBINE takes the chain pointer and the frame's nominal address
+   and produces the nominal address of the caller frame.
+
+   However, if FRAME_CHAIN_VALID returns zero,
+   it means the given frame is the outermost one and has no caller.
+   In that case, FRAME_CHAIN_COMBINE is not used.  */
+
+/* In the case of the Merlin, the frame's nominal address is the FP value,
+   and at that address is saved previous FP value as a 4-byte word.  */
+
+#define FRAME_CHAIN(thisframe)  \
+  (outside_startup_file ((thisframe)->pc) ? \
+   read_memory_integer ((thisframe)->frame, 4) :\
+   0)
+
+#define FRAME_CHAIN_VALID(chain, thisframe) \
+  (chain != 0 && (outside_startup_file (FRAME_SAVED_PC (thisframe))))
+
+#define FRAME_CHAIN_COMBINE(chain, thisframe) (chain)
+
+/* Define other aspects of the stack frame.  */
+
+#define FRAME_SAVED_PC(FRAME) (read_memory_integer ((FRAME)->frame + 4, 4))
+
+/* compute base of arguments */
+#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame)
+
+#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)
+
+/* Return number of args passed to a frame.
+   Can return -1, meaning no way to tell.  */
+
+#define FRAME_NUM_ARGS(numargs, fi)			\
+{ CORE_ADDR pc;						\
+  int insn;						\
+  int addr_mode;					\
+  int width;						\
+							\
+  pc = FRAME_SAVED_PC (fi);				\
+  insn = read_memory_integer (pc,2);			\
+  addr_mode = (insn >> 11) & 0x1f;			\
+  insn = insn & 0x7ff;					\
+  if ((insn & 0x7fc) == 0x57c				\
+      && addr_mode == 0x14) /* immediate */		\
+    { if (insn == 0x57c) /* adjspb */			\
+	width = 1;					\
+      else if (insn == 0x57d) /* adjspw */		\
+	width = 2;					\
+      else if (insn == 0x57f) /* adjspd */		\
+	width = 4;					\
+      numargs = read_memory_integer (pc+2,width);	\
+      if (width > 1)					\
+	flip_bytes (&numargs, width);			\
+      numargs = - sign_extend (numargs, width*8) / 4; }	\
+  else numargs = -1;					\
+}
+
+/* Return number of bytes at start of arglist that are not really args.  */
+
+#define FRAME_ARGS_SKIP 8
+
+/* Put here the code to store, into a struct frame_saved_regs,
+   the addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special:
+   the address we return for it IS the sp for the next frame.  */
+
+#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \
+{ int regmask,regnum;						\
+  int localcount;						\
+  CORE_ADDR enter_addr;						\
+  CORE_ADDR next_addr;						\
+								\
+  enter_addr = get_pc_function_start ((frame_info)->pc);	\
+  regmask = read_memory_integer (enter_addr+1, 1);		\
+  localcount = ns32k_localcount (enter_addr);			\
+  next_addr = (frame_info)->frame + localcount;			\
+  for (regnum = 0; regnum < 8; regnum++, regmask >>= 1)		\
+    (frame_saved_regs).regs[regnum]				\
+      = (regmask & 1) ? (next_addr -= 4) : 0;			\
+  (frame_saved_regs).regs[SP_REGNUM] = (frame_info)->frame + 4;	\
+  (frame_saved_regs).regs[PC_REGNUM] = (frame_info)->frame + 4;	\
+  (frame_saved_regs).regs[FP_REGNUM]				\
+     = read_memory_integer ((frame_info)->frame, 4); }
+
+
+/* Things needed for making the inferior call functions.  */
+
+/* Push an empty stack frame, to record the current PC, etc.  */
+
+#define PUSH_DUMMY_FRAME \
+{ register CORE_ADDR sp = read_register (SP_REGNUM);	\
+  register int regnum;					\
+  sp = push_word (sp, read_register (PC_REGNUM));	\
+  sp = push_word (sp, read_register (FP_REGNUM));	\
+  write_register (FP_REGNUM, sp);			\
+  for (regnum = 0; regnum < 8; regnum++)  		\
+    sp = push_word (sp, read_register (regnum));	\
+  write_register (SP_REGNUM, sp);  			\
+}
+
+/* Discard from the stack the innermost frame, restoring all registers.  */
+
+#define POP_FRAME  \
+{ register FRAME frame = get_current_frame ();			 \
+  register CORE_ADDR fp;					 \
+  register int regnum;						 \
+  struct frame_saved_regs fsr;					 \
+  struct frame_info *fi;						 \
+  fi = get_frame_info (frame);					 \
+  fp = fi->frame;						 \
+  get_frame_saved_regs (fi, &fsr);				 \
+  for (regnum = 0; regnum < 8; regnum++)			 \
+    if (fsr.regs[regnum])					 \
+      write_register (regnum, read_memory_integer (fsr.regs[regnum], 4)); \
+  write_register (FP_REGNUM, read_memory_integer (fp, 4));	 \
+  write_register (PC_REGNUM, read_memory_integer (fp + 4, 4));   \
+  write_register (SP_REGNUM, fp + 8);				 \
+  flush_cached_frames ();					 \
+  set_current_frame (create_new_frame (read_register (FP_REGNUM),\
+				       read_pc ()));		 \
+}
+
+/* This sequence of words is the instructions
+     enter	0xff,0		82 ff 00
+     jsr	@0x00010203	7f ae c0 01 02 03
+     adjspd	0x69696969	7f a5 01 02 03 04
+     bpt			f2
+   Note this is 16 bytes.  */
+
+#define CALL_DUMMY { 0x7f00ff82, 0x0201c0ae, 0x01a57f03, 0xf2040302 }
+
+#define CALL_DUMMY_START_OFFSET	3
+#define CALL_DUMMY_LENGTH	16
+#define CALL_DUMMY_ADDR		5
+#define CALL_DUMMY_NARGS	11
+
+/* Insert the specified number of args and function address
+   into a call sequence of the above form stored at DUMMYNAME.  */
+
+#define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p)   		\
+{ int flipped = fun | 0xc0000000;				\
+  flip_bytes (&flipped, 4);					\
+  *((int *) (((char *) dummyname)+CALL_DUMMY_ADDR)) = flipped;	\
+  flipped = - nargs * 4;					\
+  flip_bytes (&flipped, 4);					\
+  *((int *) (((char *) dummyname)+CALL_DUMMY_NARGS)) = flipped;	\
+}