* nm-*, xm-*, tm-*: All native, host, and target files, which

	get linked to nm.h, xm.h, and tm.h respectively by configure,
	moved to appropriate config/<cpu> subdirectory.
	* nm-sysv4.h, xm-sysv4.h, tm-sysv4.h, tm-sunos.h, nm-trash.h:
	Native, host, and target files that are common across more than
	one cpu architecture and included by one of the configured
	native, host, or target files, get moved to config directory.

1 files changed, 0 insertions, 305 deletions

diff --git a/gdb/tm-h8300.h b/gdb/tm-h8300.h
index a583ecc..e69de29 100644
--- a/gdb/tm-h8300.h
+++ b/gdb/tm-h8300.h
@@ -1,305 +0,0 @@
-/* Parameters for execution on a H8/300 series machine.
-   Copyright 1992, 1993 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
-
-/* Contributed by Steve Chamberlain sac@cygnus.com */
-
-
-#define UNSIGNED_SHORT(X) ((X) & 0xffff)
-
-
-#define EXTRA_FRAME_INFO 	\
-	struct frame_saved_regs *fsr;	\
-	CORE_ADDR from_pc; \
-	CORE_ADDR args_pointer;\
-        CORE_ADDR locals_pointer ;
-
-
-
-/* Zero the frame_saved_regs pointer when the frame is initialized,
-   so that FRAME_FIND_SAVED_REGS () will know to allocate and
-   initialize a frame_saved_regs struct the first time it is called.
-   Set the arg_pointer to -1, which is not valid; 0 and other values
-   indicate real, cached values.  */
-
-#define INIT_EXTRA_FRAME_INFO(fromleaf, fi) \
-	init_extra_frame_info (fromleaf, fi)
-
-extern void init_extra_frame_info ();
-
-
-#define IEEE_FLOAT
-/* Define the bit, byte, and word ordering of the machine.  */
-#define TARGET_BYTE_ORDER BIG_ENDIAN
-#undef TARGET_INT_BIT
-#define TARGET_INT_BIT 16
-#undef TARGET_PTR_BIT
-#define TARGET_PTR_BIT 16
-
-
-/* Offset from address of function to start of its code.
-   Zero on most machines.  */
-
-#define FUNCTION_START_OFFSET 0
-
-/* Advance PC across any function entry prologue instructions
-   to reach some "real" code.  */
-
-
-#define SKIP_PROLOGUE(ip)   {(ip) = h8300_skip_prologue(ip);}
-extern CORE_ADDR h8300_skip_prologue ();
-
-
-/* Immediately after a function call, return the saved pc.
-   Can't always go through the frames for this because on some machines
-   the new frame is not set up until the new function executes
-   some instructions.  */
-
-#define SAVED_PC_AFTER_CALL(frame) \
-UNSIGNED_SHORT(read_memory_integer (read_register (SP_REGNUM), 2))
-
-/* Stack grows downward.  */
-
-#define INNER_THAN <
-
-
-#define BREAKPOINT {0x53, 0x00}
-
-
-/* If your kernel resets the pc after the trap happens you may need to
-   define this before including this file.  */
-
-
-#define DECR_PC_AFTER_BREAK 0
-
-
-/* Nonzero if instruction at PC is a return instruction.  */
-/* Allow any of the return instructions, including a trapv and a return
-   from interupt.  */
-
-#define ABOUT_TO_RETURN(pc) ((read_memory_integer (pc, 2) & ~0x3) == 0x4e74)
-
-/* Return 1 if P points to an invalid floating point value.  */
-
-#define INVALID_FLOAT(p, len) 0   /* Just a first guess; not checked */
-
-/* Say how long registers are.  */
-
-#define REGISTER_TYPE  unsigned short
-
-/*#  define NUM_REGS 20 /* 20 for fake HW support */
-#  define NUM_REGS 11
-#  define REGISTER_BYTES (NUM_REGS*2)
-
-
-/* Index within `registers' of the first byte of the space for
-   register N.  */
-
-#define REGISTER_BYTE(N)  ((N) * 2)
-
-/* Number of bytes of storage in the actual machine representation
-   for register N.  On the H8/300, all regs are 2 bytes.  */
-
-#define REGISTER_RAW_SIZE(N) 2
-
-/* Number of bytes of storage in the program's representation
-   for register N.  On the H8/300, all regs are 2 bytes.  */
-
-#define REGISTER_VIRTUAL_SIZE(N) 2
-
-/* Largest value REGISTER_RAW_SIZE can have.  */
-
-#define MAX_REGISTER_RAW_SIZE 2
-
-/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
-
-#define MAX_REGISTER_VIRTUAL_SIZE 2
-
-/* Nonzero if register N requires conversion
-   from raw format to virtual format.  */
-
-#define REGISTER_CONVERTIBLE(N) 1
-
-/* Convert data from raw format for register REGNUM
-   to virtual format for register REGNUM.  */
-
-/*#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,FROM,TO)  */
-
-/* Convert data from virtual format for register REGNUM
-   to raw format for register REGNUM.  */
-
-/*#define REGISTER_CONVERT_TO_RAW(REGNUM,FROM,TO)  */
-
-/* Return the GDB type object for the "standard" data type
-   of data in register N.  */
-
-#define REGISTER_VIRTUAL_TYPE(N)  builtin_type_unsigned_short
-
-
-/* Initializer for an array of names of registers.
-   Entries beyond the first NUM_REGS are ignored.  */
-
-#if NUM_REGS==20
-#define REGISTER_NAMES  \
- {"r0", "r1", "r2", "r3", "r4", "r5", "r6", "sp",\
-  "ccr","pc","cycles","hcheck","tier","tcsr","frc",\
-   "ocra","ocrb","tcr","tocr","icra"} 
-#else
-#define REGISTER_NAMES \
-  {"r0", "r1", "r2", "r3", "r4", "r5", "r6", "sp", "ccr","pc","cycles"}
-#endif
-
-/* Register numbers of various important registers.
-   Note that some of these values are "real" register numbers,
-   and correspond to the general registers of the machine,
-   and some are "phony" register numbers which are too large
-   to be actual register numbers as far as the user is concerned
-   but do serve to get the desired values when passed to read_register.  */
-
-
-#define FP_REGNUM 6		/* Contains address of executing stack frame */
-#define SP_REGNUM 7		/* Contains address of top of stack */
-#define CCR_REGNUM 8		/* Contains processor status */
-#define PC_REGNUM 9		/* Contains program counter */
-
-/* Store the address of the place in which to copy the structure the
-   subroutine will return.  This is called from call_function. */
-
-/*#define STORE_STRUCT_RETURN(ADDR, SP) \
-  { write_register (0, (ADDR)); abort(); }*/
-
-/* Extract from an array REGBUF containing the (raw) register state
-   a function return value of type TYPE, and copy that, in virtual format,
-   into VALBUF.  */
-
-#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
-  bcopy ((char *)(REGBUF), VALBUF, TYPE_LENGTH(TYPE))
-
-
-/* Write into appropriate registers a function return value
-   of type TYPE, given in virtual format.  Assumes floats are passed
-   in d0/d1.  */
-
-
-#define STORE_RETURN_VALUE(TYPE,VALBUF) \
-  write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE))
-
-
-/* Extract from an array REGBUF containing the (raw) register state
-   the address in which a function should return its structure value,
-   as a CORE_ADDR (or an expression that can be used as one).  */
-
-#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(CORE_ADDR *)(REGBUF))
-
-/* Describe the pointer in each stack frame to the previous stack frame
-   (its caller).  */
-
-/* FRAME_CHAIN takes a frame's nominal address
-   and produces the frame's chain-pointer.
-
-   However, if FRAME_CHAIN_VALID returns zero,
-   it means the given frame is the outermost one and has no caller.  */
-
-/* In the case of the H8/300, the frame's nominal address
-   is the address of a 2-byte word containing the calling frame's address.  */
-
-/* Use the alternate method of avoiding running up off the end of
-   the frame chain or following frames back into the startup code.
-   See the comments in objfile.h */
-
-#define FRAME_CHAIN_VALID_ALTERNATE   
-
-/* Define other aspects of the stack frame.  */
-
-/* A macro that tells us whether the function invocation represented
-   by FI does not have a frame on the stack associated with it.  If it
-   does not, FRAMELESS is set to 1, else 0.  */
-#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \
-  (FRAMELESS) = frameless_look_for_prologue(FI)
-
-/* Any function with a frame looks like this
-   SECOND ARG
-   FIRST ARG
-   RET PC
-   SAVED R2
-   SAVED R3
-   SAVED FP   <-FP POINTS HERE
-   LOCALS0
-   LOCALS1    <-SP POINTS HERE
-   
-   */
-#define FRAME_SAVED_PC(FRAME) frame_saved_pc(FRAME)
-
-#define FRAME_ARGS_ADDRESS(fi) frame_args_address(fi)
-
-#define FRAME_LOCALS_ADDRESS(fi) frame_locals_address(fi);
-
-/* Set VAL to the number of args passed to frame described by FI.
-   Can set VAL to -1, meaning no way to tell.  */
-
-/* We can't tell how many args there are
-   now that the C compiler delays popping them.  */
-
-#define FRAME_NUM_ARGS(val,fi) (val = -1)
-
-
-/* Return number of bytes at start of arglist that are not really args.  */
-
-#define FRAME_ARGS_SKIP 0
-
-/* Put here the code to store, into a struct frame_saved_regs,
-   the addresses of the saved registers of frame described by FRAME_INFO.
-   This includes special registers such as pc and fp saved in special
-   ways in the stack frame.  sp is even more special:
-   the address we return for it IS the sp for the next frame.  */
-
-#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs)	    \
-   frame_find_saved_regs(frame_info, &(frame_saved_regs))
-
-
-/* Push an empty stack frame, to record the current PC, etc.  */
-
-/*#define PUSH_DUMMY_FRAME	{ h8300_push_dummy_frame (); }*/
-
-/* Discard from the stack the innermost frame, restoring all registers.  */
-
-#define POP_FRAME		{ h8300_pop_frame (); }
-
-#define SHORT_INT_MAX 32767
-#define SHORT_INT_MIN -32768
-
-
-#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,FROM,TO) \
-{ memcpy((TO), (FROM),  2); }
-#define REGISTER_CONVERT_TO_RAW(REGNUM,FROM,TO)	\
-{ memcpy((TO), (FROM),  2); }
-
-#define	BEFORE_MAIN_LOOP_HOOK	\
-  hms_before_main_loop();
-
-typedef unsigned short INSN_WORD;
-
-#define ADDR_BITS_REMOVE(addr) ((addr) & 0xffff)
-#define ADDR_BITS_SET(addr) (((addr)))
-
-#define read_memory_short(x)  (read_memory_integer(x,2) & 0xffff)
-#define DONT_USE_REMOTE
-
-
-#define	PRINT_REGISTER_HOOK(regno) print_register_hook(regno)
-