Initial creation of sourceware repository

1 files changed, 0 insertions, 181 deletions

diff --git a/gdb/testsuite/gdb.trace/passc-dyn.exp b/gdb/testsuite/gdb.trace/passc-dyn.exp
deleted file mode 100644
index cf102de..0000000
--- a/gdb/testsuite/gdb.trace/passc-dyn.exp
+++ /dev/null
@@ -1,181 +0,0 @@
-#   Copyright (C) 1998 Free Software Foundation, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-# 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  
-
-# Please email any bugs, comments, and/or additions to this file to:
-# bug-gdb@prep.ai.mit.edu
-
-# This file was written by Michael Snyder (msnyder@cygnus.com)
-
-load_lib "trace-support.exp";
-
-if $tracelevel then {
-    strace $tracelevel
-}
-
-set prms_id 0
-set bug_id 0
-
-gdb_exit
-gdb_start
-if [istarget "m68k-*-elf"] then {
-    load_lib "emc-support.exp";
-    set srcfile gdb_c_test.c
-    set binfile [board_info target d490_binfile];
-    gdb_test "set remotetimeout 6" "" ""
-    set timeout 500
-    gdb_target_monitor $binfile
-    # Give a TSTOP and ignore errors, to make sure any previous trace is off
-    gdb_test "tstop" "" ""
-    gdb_test "tfind none" "" ""
-    send_gdb "compare-sections CS\n"
-    gdb_expect {
-	-re "MIS-MATCHED.*$gdb_prompt $" {
-	    gdb_suppress_entire_file "Symbol file does not match target!
-	    all tests in this module will fail.";
-	}
-	-re ".*$gdb_prompt $" { }
-    }
-} else {
-    set testfile "actions"
-    set srcfile ${testfile}.c
-    set binfile $objdir/$subdir/$testfile
-    if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile \
-	    executable {debug additional_flags="-gdwarf"}] != "" } {
-	gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
-    }
-    gdb_load $binfile
-    gdb_test "tstop"       "" ""
-    gdb_test "tfind none"  "" ""
-    runto_main
-}
-gdb_reinitialize_dir $srcdir/$subdir
-
-# We generously give ourselves one "pass" if we successfully 
-# detect that this test cannot be run on this target!
-if { ![gdb_target_supports_trace] } then {
-    pass "Current target does not supporst trace"
-    return 1;
-
-}
-
-# If testing on a remote host, download the source file.
-remote_download host $srcdir/$subdir/$srcfile
-
-
-#
-# test passcount dynamically (live target)
-#
-
-set baseline [gdb_find_recursion_test_baseline $srcfile];
-
-if { $baseline == -1 } then {
-    fail "Could not find gdb_recursion_test function"
-    return;
-}
-
-# define relative source line numbers:
-# all subsequent line numbers are relative to this first one (baseline)
-
-set testline2  [expr $baseline +  4]
-set testline3  [expr $baseline +  5]
-set testline4  [expr $baseline +  6]
-
-#
-# test passcount command semantics (live test)
-#
-
-## Set three tracepoints with three different passcounts.
-## Verify that the experiment stops after the one with the 
-## lowest passcount is hit.
-
-gdb_delete_tracepoints
-set tdp2 [gdb_gettpnum "$testline2"]
-set tdp3 [gdb_gettpnum "$testline3"]
-set tdp4 [gdb_gettpnum "$testline4"]
-if { $tdp2 <= 0 || $tdp3 <= 0 || $tdp4 <= 0 } then {
-    fail "setting tracepoints"
-    return;
-}
-
-gdb_test "passcount 4 $tdp2" "Setting tracepoint $tdp2's passcount to 4" \
-	"4.5: set passcount for tracepoint $tdp2"
-gdb_test "passcount 2 $tdp3" "Setting tracepoint $tdp3's passcount to 2" \
-	"4.5: set passcount for tracepoint $tdp3"
-gdb_test "passcount 3 $tdp4" "Setting tracepoint $tdp4's passcount to 3" \
-	"4.5: set passcount for tracepoint $tdp4"
-
-gdb_test "tstart" "" ""
-
-if [istarget "m68k-*-elf"] then {
-    gdb_emclaptop_command "85,1,2,3,4,5,6"
-    sleep 5
-    gdb_emclaptop_command "85,7,8,9,A,B,C"
-    sleep 5
-    gdb_emclaptop_command "85,D,E,F,10,11,12"
-    sleep 5
-    # gdb_test "tstop"
-    ##
-    ## Note! Must NOT give the tstop command, because the passcount
-    ##       has already stopped the experiment.  You would not
-    ##       think this would be an error, but in EMC's mind it is...
-    ##
-} else {
-    gdb_test "break end" "" ""
-    gdb_test "continue" \
-	    "Continuing.*Breakpoint $decimal, end.*" \
-	    "run trace experiment"
-    gdb_test "tstop" "" ""
-}
-
-gdb_test "tfind none" "" ""
-if [gdb_test "printf \"x \%d x\\n\", \$trace_frame" "x -1 x" ""] {
-    gdb_suppress_entire_file "0: tfind none failed"
-}
-
-gdb_test "tfind tracepoint $tdp2" "" ""
-if [gdb_test "printf \"x \%d x\\n\", \$trace_frame" "x 0 x" ""] {
-    gdb_suppress_entire_file "1: first tfind failed"
-}
-
-gdb_test "tfind tracepoint $tdp3" "" ""
-if [gdb_test "printf \"x \%d x\\n\", \$trace_frame" "x 1 x" ""] {
-    gdb_suppress_entire_file "2: second tfind failed"
-}
-
-gdb_test "tfind tracepoint $tdp4" "" ""
-if [gdb_test "printf \"x \%d x\\n\", \$trace_frame" "x 2 x" ""] {
-    gdb_suppress_entire_file "3: third tfind failed"
-}
-
-gdb_test "tfind tracepoint $tdp2" "" ""
-if [gdb_test "printf \"x \%d x\\n\", \$trace_frame" "x 3 x" ""] {
-    gdb_suppress_entire_file "4: fourth tfind failed"
-}
-
-gdb_test "tfind tracepoint $tdp3" "" ""
-if [gdb_test "printf \"x \%d x\\n\", \$trace_frame" "x 4 x" ""] {
-    gdb_suppress_entire_file "5: fifth tfind failed"
-}
-
-## We should now be at the last frame, because this frame's passcount
-## should have caused collection to stop.  If we do a tfind now, 
-## it should fail.
-
-gdb_test "tfind" "failed to find.*" "4.5: dynamic passcount test"
-
-# Finished!
-gdb_test "tfind none" "" ""
-