* dummy-frame.c (dummy_frame): Replace regcache member with

	caller_state.
	(dummy_frame_push): Replace caller_regcache arg with caller_state.
	All callers updated.
	(remove_dummy_frame,pop_dummy_frame,lookup_dummy_frame): New fns.
	(dummy_frame_pop): Rewrite.  Verify requested frame is in the
	dummy frame stack.  Restore program state.
	(cleanup_dummy_frames): Rewrite.
	(dummy_frame_sniffer): Update.  Make static.
	* dummy-frame.h (regcache,frame_info): Delete forward decls.
	(inferior_thread_state): New forward decl.
	(dummy_frame_push): Update prototype.
	* frame.c (frame_pop): dummy_frame_pop now does all the work for
	DUMMY_FRAMEs.
	* infcall.c (breakpoint_auto_delete_contents): Delete.
	(get_function_name,run_inferior_call): New fns.
	(call_function_by_hand): Simplify by moving some code to
	get_function_name, run_inferior_call.  Inferior function call wrapped
	in TRY_CATCH so there's less need for cleanups and all exits from
	proceed are handled similarily.  Detect program exit.
	Detect program stopping in a different thread.
	Make error messages more consistent.
	* inferior.h (inferior_thread_state): Declare (opaque type).
	(save_inferior_thread_state,restore_inferior_thread_state,
	make_cleanup_restore_inferior_thread_state,
	discard_inferior_thread_state, get_inferior_thread_state_regcache):
	Declare.
	(save_inferior_status): Update prototype.
	* infrun.c: (normal_stop): When stopped for the completion of an
	inferior function call, verify the expected stack frame kind.
	(inferior_thread_state): New struct.
	(save_inferior_thread_state,restore_inferior_thread_state,
	do_restore_inferior_thread_state_cleanup,
	make_cleanup_restore_inferior_thread_state,
	discard_inferior_thread_state,
	get_inferior_thread_state_regcache): New functions.
	(inferior_status): Move stop_signal, stop_pc, registers to
	inferior_thread_state.  Remove restore_stack_info.
	(save_inferior_status): Remove arg restore_stack_info.
	All callers updated.  Remove saving of state now saved by
	save_inferior_thread_state.
	(restore_inferior_status): Remove restoration of state now done by
	restore_inferior_thread_state.
	(discard_inferior_status): Remove freeing of registers, now done by
	discard_inferior_thread_state.

	* gdb.base/break.exp: Update expected gdb output.
	* gdb.base/sepdebug.exp: Ditto.
	* gdb.mi/mi-syn-frame.exp: Ditto.
	* gdb.mi/mi2-syn-frame.exp: Ditto.

	* gdb.base/call-signal-resume.exp: New file.
	* gdb.base/call-signals.c: New file.
	* gdb.base/unwindonsignal.exp: New file.
	* gdb.base/unwindonsignal.c: New file.
	* gdb.threads/interrupted-hand-call.exp: New file.
	* gdb.threads/interrupted-hand-call.c: New file.
	* gdb.threads/thread-unwindonsignal.exp: New file.

3 files changed, 358 insertions, 0 deletions

diff --git a/gdb/testsuite/gdb.threads/interrupted-hand-call.c b/gdb/testsuite/gdb.threads/interrupted-hand-call.c
new file mode 100644
index 0000000..2b9506b
--- /dev/null
+++ b/gdb/testsuite/gdb.threads/interrupted-hand-call.c
@@ -0,0 +1,149 @@
+/* Test case for hand function calls interrupted by a signal in another thread.
+
+   Copyright 2008 Free Software Foundation, Inc.
+
+   This file is part of GDB.
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
+
+#include <pthread.h>
+#include <signal.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <time.h>
+#include <unistd.h>
+
+#ifndef NR_THREADS
+#define NR_THREADS 4
+#endif
+
+pthread_t threads[NR_THREADS];
+
+/* Number of threads currently running.  */
+int thread_count;
+
+pthread_mutex_t thread_count_mutex;
+
+pthread_cond_t thread_count_condvar;
+
+sig_atomic_t sigabrt_received;
+
+void
+incr_thread_count (void)
+{
+  pthread_mutex_lock (&thread_count_mutex);
+  ++thread_count;
+  if (thread_count == NR_THREADS)
+    pthread_cond_signal (&thread_count_condvar);
+  pthread_mutex_unlock (&thread_count_mutex);
+}
+
+void
+cond_wait (pthread_cond_t *cond, pthread_mutex_t *mut)
+{
+  pthread_mutex_lock (mut);
+  pthread_cond_wait (cond, mut);
+  pthread_mutex_unlock (mut);
+}
+
+void
+noreturn (void)
+{
+  pthread_mutex_t mut;
+  pthread_cond_t cond;
+
+  pthread_mutex_init (&mut, NULL);
+  pthread_cond_init (&cond, NULL);
+
+  /* Wait for a condition that will never be signaled, so we effectively
+     block the thread here.  */
+  cond_wait (&cond, &mut);
+}
+
+void *
+thread_entry (void *unused)
+{
+  incr_thread_count ();
+  noreturn ();
+}
+
+void
+sigabrt_handler (int signo)
+{
+  sigabrt_received = 1;
+}
+
+/* Helper to test a hand-call being "interrupted" by a signal on another
+   thread.  */
+
+void
+hand_call_with_signal (void)
+{
+  const struct timespec ts = { 0, 10000000 }; /* 0.01 sec */
+
+  sigabrt_received = 0;
+  pthread_kill (threads[0], SIGABRT);
+  while (! sigabrt_received)
+    nanosleep (&ts, NULL);
+}
+
+/* Wait until all threads are running.  */
+
+void
+wait_all_threads_running (void)
+{
+  pthread_mutex_lock (&thread_count_mutex);
+  if (thread_count == NR_THREADS)
+    {
+      pthread_mutex_unlock (&thread_count_mutex);
+      return;
+    }
+  pthread_cond_wait (&thread_count_condvar, &thread_count_mutex);
+  if (thread_count == NR_THREADS)
+    {
+      pthread_mutex_unlock (&thread_count_mutex);
+      return;
+    }
+  pthread_mutex_unlock (&thread_count_mutex);
+  printf ("failed waiting for all threads to start\n");
+  abort ();
+}
+
+/* Called when all threads are running.
+   Easy place for a breakpoint.  */
+
+void
+all_threads_running (void)
+{
+}
+
+int
+main (void)
+{
+  int i;
+
+  signal (SIGABRT, sigabrt_handler);
+
+  pthread_mutex_init (&thread_count_mutex, NULL);
+  pthread_cond_init (&thread_count_condvar, NULL);
+
+  for (i = 0; i < NR_THREADS; ++i)
+    pthread_create (&threads[i], NULL, thread_entry, NULL);
+
+  wait_all_threads_running ();
+  all_threads_running ();
+
+  return 0;
+}
+
diff --git a/gdb/testsuite/gdb.threads/interrupted-hand-call.exp b/gdb/testsuite/gdb.threads/interrupted-hand-call.exp
new file mode 100644
index 0000000..375d623
--- /dev/null
+++ b/gdb/testsuite/gdb.threads/interrupted-hand-call.exp
@@ -0,0 +1,92 @@
+# Copyright (C) 2004, 2007, 2008 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# Test recovering from a hand function call that gets interrupted
+# by a signal in another thread.
+
+set NR_THREADS 4
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set testfile "interrupted-hand-call"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable [list debug "incdir=${objdir}" "additional_flags=-DNR_THREADS=$NR_THREADS"]] != "" } {
+    return -1
+}
+
+# Some targets can't do function calls, so don't even bother with this
+# test.
+if [target_info exists gdb,cannot_call_functions] {
+    setup_xfail "*-*-*" 2416
+    fail "This target can not call functions"
+    continue
+}
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+if { ![runto_main] } {
+    fail "Can't run to main"
+    return 0
+}
+
+gdb_test "break all_threads_running" \
+         "Breakpoint 2 at .*: file .*${srcfile}, line .*" \
+         "breakpoint on all_threads_running"
+
+# Run the program and make sure GDB reports that we stopped after
+# hitting breakpoint 2 in all_threads_running().
+
+gdb_test "continue" \
+         ".*Breakpoint 2, all_threads_running ().*" \
+         "run to all_threads_running"
+
+# NOTE: Don't turn on scheduler-locking here.
+# We want the main thread (hand_call_with_signal) and
+# thread 1 (sigabrt_handler) to both run.
+
+gdb_test "call hand_call_with_signal()" \
+    ".*in another thread.*" \
+    "hand-call interrupted by signal in another thread"
+
+# Verify dummy stack frame is still present.
+
+gdb_test "maint print dummy-frames" ".*stack=.*" "dummy stack frame present"
+
+# Continuing now should exit the hand-call and pop the dummy frame.
+
+gdb_test "continue" "" "finish hand-call"
+
+gdb_test_multiple "maint print dummy-frames" "dummy frame popped" {
+    -re ".*stack=.*$gdb_prompt $" {
+	fail "dummy frame popped"
+    }
+    -re ".*$gdb_prompt $" {
+	pass "dummy frame popped"
+    }
+}
+
+# Continue one last time, the program should exit normally.
+
+gdb_test "continue" "Program exited normally." \
+    "continue to program exit"
+
+return 0
diff --git a/gdb/testsuite/gdb.threads/thread-unwindonsignal.exp b/gdb/testsuite/gdb.threads/thread-unwindonsignal.exp
new file mode 100644
index 0000000..8d68534
--- /dev/null
+++ b/gdb/testsuite/gdb.threads/thread-unwindonsignal.exp
@@ -0,0 +1,117 @@
+# Copyright (C) 2008 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# Test use of unwindonsignal when a hand function call that gets interrupted
+# by a signal in another thread.
+
+set NR_THREADS 4
+
+if $tracelevel then {
+	strace $tracelevel
+}
+
+set testfile "interrupted-hand-call"
+set srcfile ${testfile}.c
+set binfile ${objdir}/${subdir}/${testfile}
+
+if {[gdb_compile_pthreads "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable [list debug "incdir=${objdir}" "additional_flags=-DNR_THREADS=$NR_THREADS"]] != "" } {
+    return -1
+}
+
+# Some targets can't do function calls, so don't even bother with this
+# test.
+if [target_info exists gdb,cannot_call_functions] {
+    setup_xfail "*-*-*" 2416
+    fail "This target can not call functions"
+    continue
+}
+
+gdb_exit
+gdb_start
+gdb_reinitialize_dir $srcdir/$subdir
+gdb_load ${binfile}
+
+if { ![runto_main] } {
+    fail "Can't run to main"
+    return 0
+}
+
+gdb_test "break all_threads_running" \
+         "Breakpoint 2 at .*: file .*${srcfile}, line .*" \
+         "breakpoint on all_threads_running"
+
+# Run the program and make sure GDB reports that we stopped after
+# hitting breakpoint 2 in all_threads_running().
+
+gdb_test "continue" \
+         ".*Breakpoint 2, all_threads_running ().*" \
+         "run to all_threads_running"
+
+# NOTE: Don't turn on scheduler-locking here.
+# We want the main thread (hand_call_with_signal) and
+# thread 1 (sigabrt_handler) to both run.
+
+# Do turn on unwindonsignal.
+# We want to test gdb handling of the current thread changing when
+# unwindonsignal is in effect.
+gdb_test "set unwindonsignal on" \
+	"" \
+	"setting unwindonsignal"
+gdb_test "show unwindonsignal" \
+	"Unwinding of stack .* is on." \
+	"showing unwindonsignal"
+
+gdb_test "call hand_call_with_signal()" \
+    "The program received a signal.*" \
+    "hand-call interrupted by signal in another thread"
+
+# Verify dummy stack frame is still present.
+# ??? Should unwindonsignal still apply even if the program stops
+# because of a signal in another thread?
+
+gdb_test "maint print dummy-frames" ".*stack=.*" "dummy stack frame present"
+
+# GDB 6.8 would perform the unwindonsignal, but on the thread that stopped,
+# not the thread with the hand-called function.
+# This is tested by verifying only one thread has main in its backtrace.
+
+gdb_test_multiple "thread apply all bt" "wrong thread not unwound" {
+    -re ".* in main .* in main .*$gdb_prompt $" {
+	fail "wrong thread not unwound"
+    }
+    -re ".* in main .*$gdb_prompt $" {
+	pass "wrong thread not unwound"
+    }
+}
+
+# Continuing now should exit the hand-call and pop the dummy frame.
+
+gdb_test "continue" "" "finish hand-call"
+
+gdb_test_multiple "maint print dummy-frames" "dummy frame popped" {
+    -re ".*stack=.*$gdb_prompt $" {
+	fail "dummy frame popped"
+    }
+    -re ".*$gdb_prompt $" {
+	pass "dummy frame popped"
+    }
+}
+
+# Continue one last time, the program should exit normally.
+
+gdb_test "continue" "Program exited normally." \
+    "continue to program exit"
+
+return 0