* configure, */configure: Rebuild with autoconf 2.12.

1 files changed, 116 insertions, 37 deletions

diff --git a/gdb/testsuite/gdb.threads/configure b/gdb/testsuite/gdb.threads/configure
index 1741d58..42b7b98 100755
--- a/gdb/testsuite/gdb.threads/configure
+++ b/gdb/testsuite/gdb.threads/configure
@@ -1,7 +1,7 @@
 #! /bin/sh
 
 # Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.10 
+# Generated automatically using autoconf version 2.12 
 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
 #
 # This configure script is free software; the Free Software Foundation
@@ -49,6 +49,8 @@ mandir='${prefix}/man'
 # Initialize some other variables.
 subdirs=
 MFLAGS= MAKEFLAGS=
+# Maximum number of lines to put in a shell here document.
+ac_max_here_lines=12
 
 ac_prev=
 for ac_option
@@ -330,7 +332,7 @@ EOF
     verbose=yes ;;
 
   -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.10"
+    echo "configure generated by autoconf version 2.12"
     exit 0 ;;
 
   -with-* | --with-*)
@@ -432,11 +434,14 @@ do
 done
 
 # NLS nuisances.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
-if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+# Only set these to C if already set.  These must not be set unconditionally
+# because not all systems understand e.g. LANG=C (notably SCO).
+# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+# Non-C LC_CTYPE values break the ctype check.
 if test "${LANG+set}"   = set; then LANG=C;   export LANG;   fi
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+if test "${LC_CTYPE+set}"    = set; then LC_CTYPE=C;    export LC_CTYPE;    fi
 
 # confdefs.h avoids OS command line length limits that DEFS can exceed.
 rm -rf conftest* confdefs.h
@@ -498,6 +503,7 @@ ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
 ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
 
 if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
   # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
@@ -563,6 +569,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:573: checking host system type" >&5
 
 host_alias=$host
 case "$host_alias" in
@@ -577,12 +584,13 @@ NONE)
 esac
 
 host=`$ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$host" 1>&6
 
 echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:594: checking target system type" >&5
 
 target_alias=$target
 case "$target_alias" in
@@ -594,12 +602,13 @@ NONE)
 esac
 
 target=`$ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$target" 1>&6
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:612: checking build system type" >&5
 
 build_alias=$build
 case "$build_alias" in
@@ -611,9 +620,9 @@ NONE)
 esac
 
 build=`$ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\(.*\)-\(.*\)-\(.*\)$/\3/'`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$build" 1>&6
 
 test "$host_alias" != "$target_alias" &&
@@ -623,6 +632,7 @@ test "$host_alias" != "$target_alias" &&
 
 
 echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
+echo "configure:636: checking how to run the C preprocessor" >&5
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
@@ -637,33 +647,37 @@ else
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp.
   cat > conftest.$ac_ext <<EOF
-#line 641 "configure"
+#line 651 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:647: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:657: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out`
 if test -z "$ac_err"; then
   :
 else
   echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
   rm -rf conftest*
   CPP="${CC-cc} -E -traditional-cpp"
   cat > conftest.$ac_ext <<EOF
-#line 656 "configure"
+#line 668 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:662: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:674: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out`
 if test -z "$ac_err"; then
   :
 else
   echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
   rm -rf conftest*
   CPP=/lib/cpp
 fi
@@ -680,24 +694,27 @@ echo "$ac_t""$CPP" 1>&6
 
 for ac_hdr in pthread.h
 do
-ac_safe=`echo "$ac_hdr" | tr './\055' '___'`
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:700: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 690 "configure"
+#line 705 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:695: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:710: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out`
 if test -z "$ac_err"; then
   rm -rf conftest*
   eval "ac_cv_header_$ac_safe=yes"
 else
   echo "$ac_err" >&5
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
   rm -rf conftest*
   eval "ac_cv_header_$ac_safe=no"
 fi
@@ -705,7 +722,7 @@ rm -f conftest*
 fi
 if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
   echo "$ac_t""yes" 1>&6
-    ac_tr_hdr=HAVE_`echo $ac_hdr | tr 'abcdefghijklmnopqrstuvwxyz./\055' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ___'`
+    ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
   cat >> confdefs.h <<EOF
 #define $ac_tr_hdr 1
 EOF
@@ -733,11 +750,25 @@ cat > confcache <<\EOF
 # --recheck option to rerun configure.
 #
 EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
 # Ultrix sh set writes to stderr and can't be redirected directly,
 # and sets the high bit in the cache file unless we assign to the vars.
 (set) 2>&1 |
-  sed -n "s/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=\${\1='\2'}/p" \
-  >> confcache
+  case `(ac_space=' '; set) 2>&1` in
+  *ac_space=\ *)
+    # `set' does not quote correctly, so add quotes (double-quote substitution
+    # turns \\\\ into \\, and sed turns \\ into \).
+    sed -n \
+      -e "s/'/'\\\\''/g" \
+      -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+    ;;
+  *)
+    # `set' quotes correctly as required by POSIX, so do not add quotes.
+    sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+    ;;
+  esac >> confcache
 if cmp -s $cache_file confcache; then
   :
 else
@@ -792,7 +823,7 @@ do
     echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
     exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
   -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.10"
+    echo "$CONFIG_STATUS generated by autoconf version 2.12"
     exit 0 ;;
   -help | --help | --hel | --he | --h)
     echo "\$ac_cs_usage"; exit 0 ;;
@@ -852,20 +883,56 @@ s%@CPP@%$CPP%g
 
 CEOF
 EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+
+# Split the substitutions into bite-sized pieces for seds with
+# small command number limits, like on Digital OSF/1 and HP-UX.
+ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+ac_file=1 # Number of current file.
+ac_beg=1 # First line for current file.
+ac_end=$ac_max_sed_cmds # Line after last line for current file.
+ac_more_lines=:
+ac_sed_cmds=""
+while $ac_more_lines; do
+  if test $ac_beg -gt 1; then
+    sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
+  else
+    sed "${ac_end}q" conftest.subs > conftest.s$ac_file
+  fi
+  if test ! -s conftest.s$ac_file; then
+    ac_more_lines=false
+    rm -f conftest.s$ac_file
+  else
+    if test -z "$ac_sed_cmds"; then
+      ac_sed_cmds="sed -f conftest.s$ac_file"
+    else
+      ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+    fi
+    ac_file=`expr $ac_file + 1`
+    ac_beg=$ac_end
+    ac_end=`expr $ac_end + $ac_max_sed_cmds`
+  fi
+done
+if test -z "$ac_sed_cmds"; then
+  ac_sed_cmds=cat
+fi
+EOF
+
 cat >> $CONFIG_STATUS <<EOF
 
 CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
 EOF
 cat >> $CONFIG_STATUS <<\EOF
 for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile]", defaulting infile="outfile.in".
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
   case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
+  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
        ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
   *) ac_file_in="${ac_file}.in" ;;
   esac
 
-  # Adjust relative srcdir, etc. for subdirectories.
+  # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
 
   # Remove last slash and all that follows it.  Not all systems have dirname.
   ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
@@ -889,6 +956,7 @@ for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
     top_srcdir="$ac_dots$ac_given_srcdir" ;;
   esac
 
+
   echo creating "$ac_file"
   rm -f "$ac_file"
   configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
@@ -897,13 +965,15 @@ for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
 # $configure_input" ;;
   *) ac_comsub= ;;
   esac
+
+  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
   sed -e "$ac_comsub
 s%@configure_input@%$configure_input%g
 s%@srcdir@%$srcdir%g
 s%@top_srcdir@%$top_srcdir%g
-" -f conftest.subs $ac_given_srcdir/$ac_file_in > $ac_file
+" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
 fi; done
-rm -f conftest.subs
+rm -f conftest.s*
 
 # These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
 # NAME is the cpp macro being defined and VALUE is the value it is being given.
@@ -924,11 +994,17 @@ ac_eB='$%\1#\2define\3'
 ac_eC=' '
 ac_eD='%g'
 
-CONFIG_HEADERS=${CONFIG_HEADERS-"config.h:config.in"}
+if test "${CONFIG_HEADERS+set}" != set; then
+EOF
+cat >> $CONFIG_STATUS <<EOF
+  CONFIG_HEADERS="config.h:config.in"
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+fi
 for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
-  # Support "outfile[:infile]", defaulting infile="outfile.in".
+  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
   case "$ac_file" in
-  *:*) ac_file_in=`echo "$ac_file"|sed 's%.*:%%'`
+  *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
        ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
   *) ac_file_in="${ac_file}.in" ;;
   esac
@@ -936,7 +1012,8 @@ for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then
   echo creating $ac_file
 
   rm -f conftest.frag conftest.in conftest.out
-  cp $ac_given_srcdir/$ac_file_in conftest.in
+  ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+  cat $ac_file_inputs > conftest.in
 
 EOF
 
@@ -964,8 +1041,6 @@ EOF
 
 # Break up conftest.vals because some shells have a limit on
 # the size of here documents, and old seds have small limits too.
-# Maximum number of lines to put in a single here document.
-ac_max_here_lines=12
 
 rm -f conftest.tail
 while :
@@ -1007,7 +1082,11 @@ cat >> $CONFIG_STATUS <<\EOF
   fi
 fi; done
 
+EOF
+cat >> $CONFIG_STATUS <<EOF
 
+EOF
+cat >> $CONFIG_STATUS <<\EOF
 
 exit 0
 EOF