Fix test names starting with uppercase using gdb_test on a single line.

Changes in v3:
  Fixed incorrect substitutions.

This fixes offender testcases that have test names starting with uppercase
when using gdb_test in a single line construct.

gdb/testsuite/ChangeLog
2016-12-01  Luis Machado  <lgustavo@codesourcery.com>

	Fix test names starting with uppercase throughout the files.

	* gdb.arch/i386-mpx-simple_segv.exp
	* gdb.arch/i386-mpx.exp
	* gdb.arch/i386-permbkpt.exp
	* gdb.arch/pa-nullify.exp
	* gdb.arch/powerpc-d128-regs.exp
	* gdb.arch/vsx-regs.exp
	* gdb.base/bfp-test.exp
	* gdb.base/break.exp
	* gdb.base/breakpoint-shadow.exp
	* gdb.base/callfuncs.exp
	* gdb.base/charset.exp
	* gdb.base/commands.exp
	* gdb.base/completion.exp
	* gdb.base/dfp-test.exp
	* gdb.base/echo.exp
	* gdb.base/ending-run.exp
	* gdb.base/eval.exp
	* gdb.base/expand-psymtabs.exp
	* gdb.base/float128.exp
	* gdb.base/floatn.exp
	* gdb.base/foll-exec-mode.exp
	* gdb.base/gdb1056.exp
	* gdb.base/gdb11531.exp
	* gdb.base/kill-after-signal.exp
	* gdb.base/multi-forks.exp
	* gdb.base/overlays.exp
	* gdb.base/pending.exp
	* gdb.base/sepdebug.exp
	* gdb.base/testenv.exp
	* gdb.base/valgrind-db-attach.exp
	* gdb.base/watch_thread_num.exp
	* gdb.base/watchpoint-cond-gone.exp
	* gdb.base/watchpoint.exp
	* gdb.base/watchpoints.exp
	* gdb.cp/arg-reference.exp
	* gdb.cp/baseenum.exp
	* gdb.cp/operator.exp
	* gdb.cp/shadow.exp
	* gdb.dwarf2/dw2-op-out-param.exp
	* gdb.dwarf2/dw2-reg-undefined.exp
	* gdb.go/chan.exp
	* gdb.go/hello.exp
	* gdb.go/integers.exp
	* gdb.go/methods.exp
	* gdb.go/package.exp
	* gdb.guile/scm-parameter.exp
	* gdb.guile/scm-progspace.exp
	* gdb.guile/scm-value.exp
	* gdb.mi/mi-pending.exp
	* gdb.mi/user-selected-context-sync.exp
	* gdb.multi/multi-attach.exp
	* gdb.multi/tids.exp
	* gdb.opt/clobbered-registers-O2.exp
	* gdb.pascal/floats.exp
	* gdb.pascal/integers.exp
	* gdb.python/py-block.exp
	* gdb.python/py-events.exp
	* gdb.python/py-parameter.exp
	* gdb.python/py-symbol.exp
	* gdb.python/py-symtab.exp
	* gdb.python/py-type.exp
	* gdb.python/py-value.exp
	* gdb.python/py-xmethods.exp
	* gdb.python/python.exp
	* gdb.reverse/break-precsave.exp
	* gdb.reverse/consecutive-precsave.exp
	* gdb.reverse/finish-precsave.exp
	* gdb.reverse/i386-precsave.exp
	* gdb.reverse/machinestate-precsave.exp
	* gdb.reverse/sigall-precsave.exp
	* gdb.reverse/solib-precsave.exp
	* gdb.reverse/step-precsave.exp
	* gdb.reverse/until-precsave.exp
	* gdb.reverse/watch-precsave.exp
	* gdb.server/ext-attach.exp
	* gdb.server/ext-restart.exp
	* gdb.server/ext-run.exp
	* gdb.server/ext-wrapper.exp
	* gdb.stabs/gdb11479.exp
	* gdb.stabs/weird.exp
	* gdb.threads/attach-many-short-lived-threads.exp
	* gdb.threads/kill.exp
	* gdb.threads/watchpoint-fork.exp

2 files changed, 22 insertions, 22 deletions

diff --git a/gdb/testsuite/gdb.pascal/floats.exp b/gdb/testsuite/gdb.pascal/floats.exp
index 43065ed..bd27947 100644
--- a/gdb/testsuite/gdb.pascal/floats.exp
+++ b/gdb/testsuite/gdb.pascal/floats.exp
@@ -42,15 +42,15 @@ if { [gdb_start_cmd] < 0 } {
 
 gdb_test "" ".* at .*${srcfile}.*" "start"
 
-gdb_test "cont" "Breakpoint .*:${bp_location1}.*" "Going to first breakpoint"
-gdb_test "print r" ".* = 0" "Print r before assigned to 1.25"
+gdb_test "cont" "Breakpoint .*:${bp_location1}.*" "going to first breakpoint"
+gdb_test "print r" ".* = 0" "print r before assigned to 1.25"
 
-gdb_test "next" "r := 1\\.25;" "Next to 'r := 1.25' line"
-gdb_test "next" "s := 2\\.2;" "Next to 's := 2.2' line"
-gdb_test "next" "t := -3\\.2;" "Next to 't := -3.2' line"
-gdb_test "next" "u := 78\\.3;" "Next to 'u := 78.3' line"
-gdb_test "next" "l := 1;" "Next to 'l := 1' line"
-gdb_test "next" "i := 1;" "Next to 'i := 1' line"
+gdb_test "next" "r := 1\\.25;" "next to 'r := 1.25' line"
+gdb_test "next" "s := 2\\.2;" "next to 's := 2.2' line"
+gdb_test "next" "t := -3\\.2;" "next to 't := -3.2' line"
+gdb_test "next" "u := 78\\.3;" "next to 'u := 78.3' line"
+gdb_test "next" "l := 1;" "next to 'l := 1' line"
+gdb_test "next" "i := 1;" "next to 'i := 1' line"
 
 # At that point, 
 # r should be equal to 1.25
@@ -113,16 +113,16 @@ gdb_test "print 35 / 2" " = 17\\.(499.*|5|500.*)"
 # 'set r' does not work, as there are set sub-commands starting with 'r'
 # Thus we need to use 'set var r'
 gdb_test "set var r := 2.56" " := 2\\.56"
-gdb_test "print r" " = 2\\.5(599.*|6|600.*)" "Testing new r value"
+gdb_test "print r" " = 2\\.5(599.*|6|600.*)" "testing new r value"
 
 gdb_test "cont" \
 	 "Breakpoint .*:${bp_location2}.*" \
 	 "Going to second breakpoint"
-gdb_test "next" "r := cos\\(u\\);" "Advance to 'r := cos(u)' line"
-gdb_test "print u" " = 3\\.14159.*" "Test pi value"
-gdb_test "next" "s := sin\\(u\\);" "Advance to 's := sin(u)' line"
-gdb_test "print r" " = -1" "Test cos(pi) is equal to -1" 
-gdb_test "next" "" "Go past 's := sin(u)' line"
+gdb_test "next" "r := cos\\(u\\);" "advance to 'r := cos(u)' line"
+gdb_test "print u" " = 3\\.14159.*" "test pi value"
+gdb_test "next" "s := sin\\(u\\);" "advance to 's := sin(u)' line"
+gdb_test "print r" " = -1" "test cos(pi) is equal to -1"
+gdb_test "next" "" "go past 's := sin(u)' line"
 
 set msg "Test sin(pi) is equal to 0" 
 
diff --git a/gdb/testsuite/gdb.pascal/integers.exp b/gdb/testsuite/gdb.pascal/integers.exp
index ec9739c..4e62745 100644
--- a/gdb/testsuite/gdb.pascal/integers.exp
+++ b/gdb/testsuite/gdb.pascal/integers.exp
@@ -40,12 +40,12 @@ if { [gdb_start_cmd] < 0 } {
 
 gdb_test "" ".* at .*${srcfile}.*" "start"
 
-gdb_test "cont" "Breakpoint .*:${bp_location1}.*" "Going to first breakpoint"
+gdb_test "cont" "Breakpoint .*:${bp_location1}.*" "going to first breakpoint"
 
-gdb_test "print i" ".* = 0" "Print i before assigned to 1"
+gdb_test "print i" ".* = 0" "print i before assigned to 1"
 
-gdb_test "next" "i := 1;" "Next to 'i := 1' line"
-gdb_test "next" "j := 2;" "Next to 'j := 2' line"
+gdb_test "next" "i := 1;" "next to 'i := 1' line"
+gdb_test "next" "j := 2;" "next to 'j := 2' line"
 # At that point, 
 # i should be equal to 1
 gdb_test "print i" " = 1" 
@@ -53,10 +53,10 @@ gdb_test "print i" " = 1"
 if { $pascal_compiler_is_gpc } {
   setup_xfail *-*-*
 }
-gdb_test "print j" " = 0" "Test j value before assignment"
+gdb_test "print j" " = 0" "test j value before assignment"
 
-gdb_test "next" "k := 3;" "Next to 'k := 3' line"
-gdb_test "next" "l := k;" "Next to 'l := k' line"
+gdb_test "next" "k := 3;" "next to 'k := 3' line"
+gdb_test "next" "l := k;" "next to 'l := k' line"
 
 #j should be equal to 2
 gdb_test "print j" " = 2"
@@ -110,7 +110,7 @@ gdb_test " print (i + 5) * (j + 7)" " = 54"
 # 'set i' does not work, as there are set sub-commands starting with 'i'
 # Thus we need to use 'set var i'
 gdb_test "set var i := 2" " := 2"
-gdb_test "print i" " = 2" "Testing new i value"
+gdb_test "print i" " = 2" "testing new i value"
 
 gdb_test "cont" \
 	 "Breakpoint .*:${bp_location2}.*" \