2004-09-05 Michael Chastain <mec.gnu@mindspring.com>

	* config/sparclet.exp: Removed.

1 files changed, 0 insertions, 388 deletions

diff --git a/gdb/testsuite/config/sparclet.exp b/gdb/testsuite/config/sparclet.exp
deleted file mode 100644
index 4e2e96b..0000000
--- a/gdb/testsuite/config/sparclet.exp
+++ /dev/null
@@ -1,388 +0,0 @@
-#   Copyright 1996, 1997 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-# 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-# This file was written by Michael Snyder <msnyder@cygnus.com>.
-
-# GDB support routines for a board using the sparclet remote debugging
-# protocol.
-
-load_lib remote.exp
-load_lib gdb.exp
-
-#
-# Sparclet remote run command.
-#
-
-proc gdb_start { } {
-    global gdb_prompt
-
-    if ![file exists loader] {
-	global libdir
-	set loader loader;
-
-	if [target_info exists gdb_stub_offset] {
-	    set result [target_compile "${libdir}/stub-loader.c" $loader executable "libs=-Wl,-Ttext,[target_info gdb_stub_offset]"];
-	} else {
-	    set result [target_compile "${libdir}/stub-loader.c" $loader executable "ldscript=[target_info gdb_stub_ldscript]"];
-	}
-    }
-
-    verbose -log "$gdb_prompt is gdb prompt"
-
-    set result 0;
-    for { set y 0; } { $y < 4 } { incr y } {
-	if { [default_gdb_start] != 0 } {
-	    return -1;
-	}
-
-	if [target_info exists baud] {
-	    send_gdb "set remotebaud [target_info baud]\n"
-	    gdb_expect {
-		-re "$gdb_prompt" { }
-		default { 
-		    perror "Error setting baud rate."
-		    return -1;
-		}
-	    }
-	}
-
-	for {set x 1;} { $x < 4 } {incr x} {
-	    set result [gdb_sparclet_startup $result];
-	    if { $result > 0 } {
-		return 1;
-	    }
-	    # mmmmm, magic numbers.
-	    if { $result == -42 || $result == -43 } {
-		break;
-	    } else {
-		reboot_target;
-	    }
-	}
-	if { $x == 4 } {
-	    return -1;
-	}
-	gdb_exit;
-	sleep 5;
-    }
-    return -1;
-}
-
-proc gdb_sparclet_startup { arg } {
-    global gdb_prompt
-    global GDB
-    global verbose
-
-    set is_running_stub 0;
-
-    if [target_info exists serial] {
-	set serial [target_info serial];
-    } else {
-	set serial [target_info netport];
-    }
-    set protocol [target_info gdb_protocol];
-    set check_stub 1;
-    if { $arg != -42 } {
-	send_gdb "target $protocol $serial\n";
-	# 10 seconds may be a bit short.
-	gdb_expect 10 {
-	    -re "already.*y or n." {
-		gdb_send "y\n";
-		exp_continue;
-	    }
-	    -re "Remote target.*connected to.*$gdb_prompt" { set check_stub 0; }
-	    -re "$gdb_prompt" { }
-	    timeout { }
-	}
-	if { $check_stub } {
-	    verbose "timed out, checking if stub is already running"
-	    send_gdb "\003";
-	    sleep 1;
-	    send_gdb "\003";
-	    gdb_expect 10 {
-		-re "$gdb_prompt" { }
-		default {
-		    remote_close host;
-		    return -42;
-		}
-	    }
-	}
-    }
-    if [target_info exists gdb_serial] {
-	set gdb_serial [target_info gdb_serial];
-    } else {
-	set gdb_serial $serial;
-    }
-    if { $check_stub } {
-	send_gdb "target remote $gdb_serial\n";
-	gdb_expect 15 {
-	    -re "Remote debugging.*$gdb_prompt" {
-		verbose "stub is already running"
-		set is_running_stub 1;
-	    }
-	    default {
-		warning "board isn't responding";
-		remote_close host;
-		remote_reboot target;
-		return -43;
-	    }
-	}
-    }
-
-    if { $is_running_stub == 0 } {
-	global srcdir
-
-	if [is_remote host] {
-	    set loader [remote_download host "loader"];
-	} else {
-	    set loader "loader";
-	}
-	send_gdb "file $loader\n";
-	gdb_expect {
-	     -re "A program is being debug.*Kill it.*y or n. $" {
-		send_gdb "y\n"
-		exp_continue
-	    }
-	     -re "Load new symbol table.*y or n. $" {
-		send_gdb "y\n"
-		exp_continue
-	    }
-	     -re "Reading symbols from.*done..*$gdb_prompt $" {}
-	     -re "$gdb_prompt $" { perror "GDB couldn't find loader" }
-	     timeout { 
-		perror "(timeout) read symbol file" ; 
-		return -1
-	    }
-	}
-
-	send_gdb "target $protocol $serial\n";
-	gdb_expect {
-	     -re "Remote target.*connected to.*$gdb_prompt" { }
-	     default {
-		perror "Error reconnecting to board.";
-		return -1;
-	    }
-	}
-
-	send_gdb "load $loader [target_info gdb_stub_offset]\n"
-	verbose "Loading $loader into $GDB" 2
-	set no_run_command 0;
-	gdb_expect 1200 {
-	     -re "Loading.*$gdb_prompt $" {
-		verbose "Loaded $loader into $GDB" 1
-	    }
-	    -re "Transfer rate:.*Switching to remote protocol.*Remote debugging" {
-		set no_run_command 1;
-	    }
-	     -re "$gdb_prompt $"     {
-		if $verbose>1 then {
-		    perror "GDB couldn't load."
-		}
-	    }
-	     timeout {
-		if $verbose>1 then {
-		    perror "Timed out trying to load $arg."
-		}
-	    }
-	}
-
-	if !$no_run_command {
-	    send_gdb "run\n";
-	    gdb_expect 60 {
-		-re "A program is being debug.*Kill it.*y or n. $" {
-		    send_gdb "y\n"
-		    exp_continue
-		}
-		-re "The program being debugged .*y or n. $" {
-		    send_gdb "y\n"
-		    exp_continue
-		}
-		-re "Starting program:.*loader.*$" { 
-		    verbose "Starting loader succeeded" 
-		}
-		timeout { 
-		    perror "(timeout) starting the loader" ; 
-		    return -1 
-		}
-		default {
-		    perror "error starting the loader";
-		}
-	    }
-	}
-	sleep 2;
-	send_gdb ""
-	sleep 1;
-	send_gdb ""
-	verbose "Sent ^C^C"
-	gdb_expect 10 {
-	     -re "Give up .and stop debugging it.*$" {
-		send_gdb "y\n"
-		exp_continue
-	    }
-	    -re "$gdb_prompt $" { 
-		verbose "Running loader succeeded" 
-	    }
-	    timeout { 
-		warning "(timeout) interrupting the loader" ;
-		remote_close host;
-	    }
-	    default {
-		warning "error interrupting the loader";
-	    }
-	}
-
-	gdb_exit;
-	return [gdb_start];
-    }
-    return 1;
-}
-
-proc gdb_run_cmd { args } {
-    global gdb_prompt
-
-    gdb_breakpoint exit;
-    send_gdb "set \$fp=0\n";
-    gdb_expect {
-	 -re "$gdb_prompt" { }
-    }
-    # This is needed for the SparcLite. Whee.
-    if [target_info exists gdb,start_symbol] {
-	set start_comm "jump *[target_info gdb,start_symbol]\n";
-    } else {
-	set start_comm "jump *start\n";
-    }
-    send_gdb "break copyloop\n";
-    gdb_expect 10 {
-	-re "Breakpoint.*$gdb_prompt $" {
-	    set start_comm "continue\n";
-	}
-	-re "$gdb_prompt $" { }
-	timeout { warning "break copyloop failed badly"; }
-    }
-    send_gdb $start_comm;
-    gdb_expect 10 {
-	-re "y or n. $" {
-	    remote_send host "y\n"
-	    exp_continue;
-	}
-	-re "Breakpoint.*in copyloop.*$gdb_prompt $" {
-	    remote_send host "jump relocd\n";
-	    exp_continue;
-	}
-	-re "Continuing at.*\[\r\n\]" { }
-	default {
-	    return -1;
-	}
-    }
-
-    return "";
-}
-
-
-#
-# gdb_load -- load a file into the GDB. 
-#             Returns a 0 if there was an error,
-#                       1 if it load successfully.
-#
-proc gdb_load { arg } {
-    global verbose
-    global loadpath
-    global loadfile
-    global gdb_prompt
-    global GDB
-    global expect_out
-
-    set loadfile [file tail $arg]
-    set loadpath [file dirname $arg]
-
-    set protocol [target_info gdb_protocol];
-
-    if [is_remote host] {
-	set arg [remote_download host $arg];
-    }
-    send_gdb "file $arg\n"
-    gdb_expect 30 {
-	 -re "A program is being debug.*Kill it.*y or n. $" {
-	    send_gdb "y\n"
-	    exp_continue
-	}
-         -re "Load new symbol table.*y or n. $" {
-	    send_gdb "y\n"
-	    exp_continue
-	}
-	 -re "Reading symbols from.*done..*$gdb_prompt $" {}
-	 -re "$gdb_prompt $" { perror "GDB couldn't read file" }
-	 timeout { 
-	    perror "(timeout) read symbol file" ; 
-	    return -1 
-	}
-    }
-
-    if [target_info exists gdb_serial] {
-	set gdb_serial [target_info gdb_serial];
-    } else {
-	if [target_info exists serial] {
-	    set gdb_serial [target_info serial];
-	} else {
-	    set gdb_serial [target_info netport];
-	}
-    }
-    send_gdb "target remote $gdb_serial\n"
-    gdb_expect 30 {
-	-re "Kill it?.*y or n.*" {
-	    send_gdb "y\n";
-	    exp_continue
-	}
-	-re "$gdb_prompt $"	{
-	    verbose "Set remote target to $gdb_serial" 2
-	}
-	timeout { 
-	    perror "Couldn't set remote target."
-	    return -1
-	}
-    }
-    if [target_info exists gdb_load_offset] {
-	set offset "[target_info gdb_load_offset]";
-    } else {
-	set offset "";
-    }
-    send_gdb "load $arg $offset\n"
-    verbose "Loading $arg into $GDB" 2
-    gdb_expect 1200 {
-	 -re "Loading.*$gdb_prompt $" {
-	    verbose "Loaded $arg into $GDB" 1
-	}
-	 -re "$gdb_prompt $"     {
-	    if $verbose>1 then {
-		perror "GDB couldn't load."
-	    }
-	}
-	 timeout {
-	    if $verbose>1 then {
-		perror "Timed out trying to load $arg."
-	    }
-	}
-    }
-    send_gdb "list main\n";
-    gdb_expect 60 {
-	 -re "$gdb_prompt" { }
-	 default {
-	    perror "command for list main never completed";
-	    return -1;
-	}
-    }
-
-    return 0
-}