gdb-3.3

1 files changed, 893 insertions, 0 deletions

diff --git a/gdb/remote-sa.m68k.shar b/gdb/remote-sa.m68k.shar
new file mode 100644
index 0000000..ca82553
--- /dev/null
+++ b/gdb/remote-sa.m68k.shar
@@ -0,0 +1,893 @@
+# This is a shell archive.  Remove anything before this line,
+# then unpack it by saving it in a file and typing "sh file".
+#
+# Wrapped by Glenn Engel <glenne@labgre> on Mon Jun 12 15:19:20 1989
+#
+# This archive contains:
+#	remcom.c	
+#
+
+LANG=""; export LANG
+PATH=/bin:/usr/bin:$PATH; export PATH
+
+echo x - remcom.c
+cat >remcom.c <<'@EOF'
+
+/****************************************************************************
+
+		THIS SOFTWARE IS NOT COPYRIGHTED  
+   
+   HP offers the following for use in the public domain.  HP makes no
+   warranty with regard to the software or it's performance and the 
+   user accepts the software "AS IS" with all faults.
+
+   HP DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, WITH REGARD
+   TO THIS SOFTWARE INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+   OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+
+****************************************************************************/
+
+/****************************************************************************
+ *  $Header: remcom.c,v 1.25 89/05/16 14:34:00 glenne Exp $                   
+ *
+ *  $Module name: remcom.c $  
+ *  $Revision: 1.25 $
+ *  $Date: 89/05/16 14:34:00 $
+ *  $Contributor:     Lake Stevens Instrument Division$
+ *  
+ *  $Description:     low level support for gdb debugger. $
+ *
+ *  $Considerations:  only works on target hardware $
+ *
+ *  $Written by:      Glenn Engel $
+ *  $ModuleState:     Experimental $ 
+ *
+ *  $NOTES:           See Below $
+ * 
+ *  To enable debugger support, two things need to happen.  One, a
+ *  call to set_debug_traps() is necessary in order to allow any breakpoints
+ *  or error conditions to be properly intercepted and reported to gdb.
+ *  Two, a breakpoint needs to be generated to begin communication.  This
+ *  is most easily accomplished by a call to breakpoint().  Breakpoint()
+ *  simulates a breakpoint by executing a trap #1.
+ *  
+ *  Some explanation is probably necessary to explain how exceptions are
+ *  handled.  When an exception is encountered the 68000 pushes the current
+ *  program counter and status register onto the supervisor stack and then
+ *  transfers execution to a location specified in it's vector table.
+ *  The handlers for the exception vectors are hardwired to jmp to an address
+ *  given by the relation:  (exception - 256) * 6.  These are decending 
+ *  addresses starting from -6, -12, -18, ...  By allowing 6 bytes for
+ *  each entry, a jsr, jmp, bsr, ... can be used to enter the exception 
+ *  handler.  Using a jsr to handle an exception has an added benefit of
+ *  allowing a single handler to service several exceptions and use the
+ *  return address as the key differentiation.  The vector number can be
+ *  computed from the return address by [ exception = (addr + 1530) / 6 ].
+ *  The sole purpose of the routine _catchException is to compute the
+ *  exception number and push it on the stack in place of the return address.
+ *  The external function exceptionHandler() is
+ *  used to attach a specific handler to a specific 68k exception.
+ *  For 68020 machines, the ability to have a return address around just
+ *  so the vector can be determined is not necessary because the '020 pushes an
+ *  extra word onto the stack containing the vector offset
+ * 
+ *  Because gdb will sometimes write to the stack area to execute function
+ *  calls, this program cannot rely on using the supervisor stack so it
+ *  uses it's own stack area reserved in the int array remcomStack.  
+ * 
+ *************
+ *
+ *    The following gdb commands are supported:
+ * 
+ * command          function                               Return value
+ * 
+ *    g             return the value of the CPU registers  hex data or ENN
+ *    G             set the value of the CPU registers     OK or ENN
+ * 
+ *    mAA..AA,LLLL  Read LLLL bytes at address AA..AA      hex data or ENN
+ *    MAA..AA,LLLL: Write LLLL bytes at address AA.AA      OK or ENN
+ * 
+ *    c             Resume at current address              SNN   ( signal NN)
+ *    cAA..AA       Continue at address AA..AA             SNN
+ * 
+ *    s             Step one instruction                   SNN
+ *    sAA..AA       Step one instruction from AA..AA       SNN
+ * 
+ *    k             kill
+ *
+ *    ?             What was the last sigval ?             SNN   (signal NN)
+ * 
+ * All commands and responses are sent with a packet which includes a 
+ * checksum.  A packet consists of 
+ * 
+ * $<packet info>#<checksum>.
+ * 
+ * where
+ * <packet info> :: <characters representing the command or response>
+ * <checksum>    :: < two hex digits computed as modulo 256 sum of <packetinfo>>
+ * 
+ * When a packet is received, it is first acknowledged with either '+' or '-'.
+ * '+' indicates a successful transfer.  '-' indicates a failed transfer.
+ * 
+ * Example:
+ * 
+ * Host:                  Reply:
+ * $m0,10#2a               +$00010203040506070809101112131415#42
+ * 
+ ****************************************************************************/
+
+#include <stdio.h>
+#include <string.h>
+#include <setjmp.h>
+
+/************************************************************************
+ *
+ * external low-level support routines 
+ */
+typedef void (*ExceptionHook)(int);   /* pointer to function with int parm */
+typedef void (*Function)();           /* pointer to a function */
+
+extern putDebugChar();   /* write a single character      */
+extern getDebugChar();   /* read and return a single char */
+
+extern Function exceptionHandler();  /* assign an exception handler */
+extern ExceptionHook exceptionHook;  /* hook variable for errors/exceptions */
+
+
+/************************************************************************/
+/* BUFMAX defines the maximum number of characters in inbound/outbound buffers*/
+/* at least NUMREGBYTES*2 are needed for register packets */
+#define BUFMAX 400
+
+static char initialized;  /* boolean flag. != 0 means we've been initialized */
+
+int     remote_debug = 0;
+/*  debug >  0 prints ill-formed commands in valid packets & checksum errors */ 
+
+char hexchars[]="0123456789abcdef";
+
+/* there are 180 bytes of registers on a 68020 w/68881      */
+/* many of the fpa registers are 12 byte (96 bit) registers */
+#define NUMREGBYTES 180
+enum regnames {D0,D1,D2,D3,D4,D5,D6,D7, 
+               A0,A1,A2,A3,A4,A5,A6,A7, 
+               PS,PC,
+               FP0,FP1,FP2,FP3,FP4,FP5,FP6,FP7,
+               FPCONTROL,FPSTATUS,FPIADDR
+              };
+
+typedef struct FrameStruct
+{
+    struct FrameStruct  *previous;
+    int       exceptionPC;      /* pc value when this frame created */
+    int       exceptionVector;  /* cpu vector causing exception     */
+    short     frameSize;        /* size of cpu frame in words       */
+    short     sr;               /* for 68000, this not always sr    */
+    int       pc;
+    short     format;
+    int       fsaveHeader;
+    int       morejunk[0];        /* exception frame, fp save... */
+} Frame;
+
+#define FRAMESIZE 500
+static Frame *lastFrame;
+static int   frameStack[FRAMESIZE];
+
+/*
+ * these should not be static cuz they can be used outside this module
+ */
+int registers[NUMREGBYTES/4];
+int superStack;
+
+static int remcomStack[400];
+static int* stackPtr = &remcomStack[399];
+
+/*
+ * In many cases, the system will want to continue exception processing
+ * when a continue command is given.  
+ * oldExceptionHook is a function to invoke in this case.
+ */
+
+static ExceptionHook oldExceptionHook;
+
+/* the size of the exception stack on the 68020 varies with the type of
+ * exception.  The following table is the number of WORDS used
+ * for each exception format.
+ */
+static short exceptionSize[] = { 4,4,6,4,4,4,4,4,29,10,16,46,4,4,4,4 };
+
+/************* jump buffer used for setjmp/longjmp **************************/
+jmp_buf env;
+
+/***************************  ASSEMBLY CODE MACROS *************************/
+/* 									   */
+
+#ifdef __HAVE_68881__
+/* do an fsave, then remember the address to begin a restore from */
+#define SAVE_FP_REGS()    asm(" fsave   a0@-");		\
+			  asm(" fmovemx fp0-fp7,_registers+72");        \
+			  asm(" fmoveml fpcr/fpsr/fpi,_registers+168"); 
+#define RESTORE_FP_REGS() asm(" fmoveml _registers+168,fpcr/fpsr/fpi"); \
+			  asm(" fmovemx _registers+72,fp0-fp7");      	\
+			  asm(" frestore a0@+");
+#else
+#define SAVE_FP_REGS()
+#define RESTORE_FP_REGS()
+#endif /* __HAVE_68881__ */
+
+asm("
+.text
+.globl _return_to_super
+_return_to_super:
+        movel   _registers+60,sp /* get new stack pointer */        
+        movel   _lastFrame,a0   /* get last frame info  */              
+        bra     return_to_any
+
+.globl _return_to_user
+_return_to_user:
+        movel   _registers+60,a0 /* get usp */                          
+        movel   a0,usp           /* set usp */				
+        movel   _superStack,sp  /* get original stack pointer */        
+
+return_to_any:
+        movel   _lastFrame,a0   /* get last frame info  */              
+        movel   a0@+,_lastFrame /* link in previous frame     */        
+        addql   #8,a0           /* skip over pc, vector#*/              
+        movew   a0@+,d0         /* get # of words in cpu frame */       
+        addw    d0,a0           /* point to end of data        */       
+        addw    d0,a0           /* point to end of data        */       
+        movel   a0,a1                                                   
+#                                                                       
+# copy the stack frame                                                  
+        subql   #1,d0                                                   
+copyUserLoop:                                                               
+        movew   a1@-,sp@-                                               
+        dbf     d0,copyUserLoop                                             
+");                                                                     
+        RESTORE_FP_REGS()                                              
+   asm("   moveml  _registers,d0-d7/a0-a6");			        
+   asm("   rte");  /* pop and go! */                                    
+
+#define DISABLE_INTERRUPTS()   asm("         oriw   #0x0700,sr");
+#define BREAKPOINT() asm("   trap #1");
+
+/* this function is called immediately when a level 7 interrupt occurs */
+/* if the previous interrupt level was 7 then we're already servicing  */
+/* this interrupt and an rte is in order to return to the debugger.    */
+/* For the 68000, the offset for sr is 6 due to the jsr return address */
+asm("
+.text
+.globl __debug_level7
+__debug_level7:
+	movew   d0,sp@-");
+#ifdef mc68020
+asm("	movew   sp@(2),d0");
+#else
+asm("	movew   sp@(6),d0");
+#endif
+asm("	andiw   #0x700,d0
+	cmpiw   #0x700,d0
+	beq     _already7
+        movew   sp@+,d0	
+        bra     __catchException
+_already7:
+	movew   sp@+,d0");
+#ifndef mc68020
+asm("	lea     sp@(4),sp");     /* pull off 68000 return address */
+#endif
+asm("	rte");
+
+extern void _catchException();
+
+#ifdef mc68020
+/* This function is called when a 68020 exception occurs.  It saves
+ * all the cpu and fpcp regs in the _registers array, creates a frame on a
+ * linked list of frames which has the cpu and fpcp stack frames needed
+ * to properly restore the context of these processors, and invokes
+ * an exception handler (remcom_handler).
+ *
+ * stack on entry:                       stack on exit:
+ *   N bytes of junk                     exception # MSWord
+ *   Exception Format Word               exception # MSWord
+ *   Program counter LSWord              
+ *   Program counter MSWord             
+ *   Status Register                    
+ *                                       
+ *                                       
+ */
+asm(" 
+.text
+.globl __catchException
+__catchException:");
+DISABLE_INTERRUPTS();
+asm("
+        moveml  d0-d7/a0-a6,_registers /* save registers        */
+	movel	_lastFrame,a0	/* last frame pointer */
+");
+SAVE_FP_REGS();        
+asm("
+	lea     _registers,a5   /* get address of registers     */
+        movew   sp@,d1          /* get status register          */
+        movew   d1,a5@(66)      /* save sr		 	*/	
+	movel   sp@(2),a4       /* save pc in a4 for later use  */
+        movel   a4,a5@(68)      /* save pc in _regisers[]      	*/
+
+#
+# figure out how many bytes in the stack frame
+	movew   sp@(6),d0	/* get '020 exception format	*/
+        movew   d0,d2           /* make a copy of format word   */
+        andiw   #0xf000,d0      /* mask off format type         */
+        rolw    #5,d0           /* rotate into the low byte *2  */
+        lea     _exceptionSize,a1   
+        addw    d0,a1           /* index into the table         */
+	movew   a1@,d0          /* get number of words in frame */
+        movew   d0,d3           /* save it                      */
+        subw    d0,a0		/* adjust save pointer          */
+        subw    d0,a0		/* adjust save pointer(bytes)   */
+	movel   a0,a1           /* copy save pointer            */
+	subql   #1,d0           /* predecrement loop counter    */
+#
+# copy the frame
+saveFrameLoop:
+	movew  	sp@+,a1@+
+	dbf     d0,saveFrameLoop
+#
+# now that the stack has been clenaed,
+# save the a7 in use at time of exception
+        movel   sp,_superStack  /* save supervisor sp           */
+        andiw   #0x2000,d1      /* were we in supervisor mode ? */
+        beq     userMode       
+        movel   a7,a5@(60)      /* save a7                  */
+        bra     a7saveDone
+userMode:  
+	movel   usp,a1    	
+        movel   a1,a5@(60)      /* save user stack pointer	*/
+a7saveDone:
+
+#
+# save size of frame
+        movew   d3,a0@-
+
+#
+# compute exception number
+	andl    #0xfff,d2   	/* mask off vector offset	*/
+	lsrw    #2,d2   	/* divide by 4 to get vect num	*/
+        movel   d2,a0@-         /* save it                      */
+#
+# save pc causing exception
+        movel   a4,a0@-
+#
+# save old frame link and set the new value
+	movel	_lastFrame,a1	/* last frame pointer */
+	movel   a1,a0@-		/* save pointer to prev frame	*/
+        movel   a0,_lastFrame
+
+        movel   d2,sp@-		/* push exception num           */
+	movel   _exceptionHook,a0  /* get address of handler */
+        jbsr    a0@             /* and call it */
+        jmp     __returnFromException     /* now, return        */
+");
+#else /* mc68000 */
+/* This function is called when an exception occurs.  It translates the
+ * return address found on the stack into an exception vector # which
+ * is then handled by either handle_exception or a system handler.
+ * _catchException provides a front end for both.  
+ *
+ * stack on entry:                       stack on exit:
+ *   Program counter MSWord              exception # MSWord 
+ *   Program counter LSWord              exception # MSWord
+ *   Status Register                     
+ *   Return Address  MSWord              
+ *   Return Address  LSWord             
+ */
+asm("
+.text
+.globl __catchException
+__catchException:");
+DISABLE_INTERRUPTS();
+asm("
+        moveml d0-d7/a0-a6,_registers  /* save registers               */
+	movel	_lastFrame,a0	/* last frame pointer */
+");
+SAVE_FP_REGS();        
+asm("
+        lea     _registers,a5   /* get address of registers     */
+        movel   sp@+,d2         /* pop return address           */
+	addl 	#1530,d2        /* convert return addr to 	*/
+	divs 	#6,d2   	/*  exception number		*/
+	extl    d2   
+
+        moveql  #3,d3           /* assume a three word frame     */
+
+        cmpiw   #3,d2           /* bus error or address error ? */
+        bgt     normal          /* if >3 then normal error      */
+        movel   sp@+,a0@-       /* copy error info to frame buff*/
+        movel   sp@+,a0@-       /* these are never used         */
+        moveql  #7,d3           /* this is a 7 word frame       */
+     
+normal:   
+	movew   sp@+,d1         /* pop status register          */
+        movel   sp@+,a4         /* pop program counter          */
+        movew   d1,a5@(66)      /* save sr		 	*/	
+        movel   a4,a5@(68)      /* save pc in _regisers[]      	*/
+        movel   a4,a0@-         /* copy pc to frame buffer      */
+	movew   d1,a0@-         /* copy sr to frame buffer      */
+
+        movel   sp,_superStack  /* save supervisor sp          */
+
+        andiw   #0x2000,d1      /* were we in supervisor mode ? */
+        beq     userMode       
+        movel   a7,a5@(60)      /* save a7                  */
+        bra     saveDone             
+userMode:
+        movel   usp,a1    	/* save user stack pointer 	*/
+        movel   a1,a5@(60)      /* save user stack pointer	*/
+saveDone:
+
+        movew   d3,a0@-         /* push frame size in words     */
+        movel   d2,a0@-         /* push vector number           */
+        movel   a4,a0@-         /* push exception pc            */
+
+#
+# save old frame link and set the new value
+	movel	_lastFrame,a1	/* last frame pointer */
+	movel   a1,a0@-		/* save pointer to prev frame	*/
+        movel   a0,_lastFrame
+
+        movel   d2,sp@-		/* push exception num           */
+	movel   _exceptionHook,a0  /* get address of handler */
+        jbsr    a0@             /* and call it */
+        jmp     __returnFromException     /* now, return        */
+");
+#endif
+
+
+/*
+ * remcomHandler is a front end for handle_exception.  It moves the
+ * stack pointer into an area reserved for debugger use in case the
+ * breakpoint happened in supervisor mode.
+ */
+asm("_remcomHandler:");
+asm("           addl    #4,sp");        /* pop off return address     */
+asm("           movel   sp@+,d0");      /* get the exception number   */
+asm("		movel   _stackPtr,sp"); /* move to remcom stack area  */
+asm("		movel   d0,sp@-");	/* push exception onto stack  */
+asm("		jbsr    _handle_exception");    /* this never returns */
+asm("           rts");                  /* return */
+
+void _returnFromException( Frame *frame )
+{
+    /* if no existing frame, dummy one up */
+    if (! frame)
+    {
+        frame = lastFrame -1;
+        frame->frameSize = 4;
+        frame->format = 0;
+        frame->fsaveHeader = 0;
+        frame->previous = lastFrame;
+    }
+
+#ifndef mc68020
+    /* a 68000 cannot use the internal info pushed onto a bus error
+     * or address error frame when doing an RTE so don't put this info
+     * onto the stack or the stack will creep every time this happens.
+     */
+    frame->frameSize=3;
+#endif
+
+    /* throw away any frames in the list after this frame */
+    lastFrame = frame;
+
+    frame->sr = registers[(int) PS];
+    frame->pc = registers[(int) PC];
+
+    if (registers[(int) PS] & 0x2000)
+    { 
+        /* return to supervisor mode... */
+        return_to_super();
+    }
+    else
+    { /* return to user mode */
+        return_to_user();
+    }
+}
+
+int hex(ch)
+char ch;
+{
+  if ((ch >= 'a') && (ch <= 'f')) return (ch-'a'+10);
+  if ((ch >= '0') && (ch <= '9')) return (ch-'0');
+  return (0);
+}
+
+
+/* scan for the sequence $<data>#<checksum>     */
+void getpacket(buffer)
+char * buffer;
+{
+  unsigned char checksum;
+  unsigned char xmitcsum;
+  int  i;
+  int  count;
+  char ch;
+  
+  do {
+    /* wait around for the start character, ignore all other characters */
+    while ((ch = getDebugChar()) != '$'); 
+    checksum = 0;
+    count = 0;
+    
+    /* now, read until a # or end of buffer is found */
+    while (count < BUFMAX) {
+      ch = getDebugChar();
+      if (ch == '#') break;
+      checksum = checksum + ch;
+      buffer[count] = ch;
+      count = count + 1;
+      }
+    buffer[count] = 0;
+
+    if (ch == '#') {
+      xmitcsum = hex(getDebugChar()) << 4;
+      xmitcsum += hex(getDebugChar());
+      if ((remote_debug ) && (checksum != xmitcsum)) {
+        fprintf(stderr,"bad checksum.  My count = 0x%x, sent=0x%x. buf=%s\n",
+						     checksum,xmitcsum,buffer);
+      }
+      
+      if (checksum != xmitcsum) putDebugChar('-');  /* failed checksum */ 
+      else {
+	 putDebugChar('+');  /* successful transfer */
+	 /* if a sequence char is present, reply the sequence ID */
+	 if (buffer[2] == ':') {
+	    putDebugChar( buffer[0] );
+	    putDebugChar( buffer[1] );
+	    /* remove sequence chars from buffer */
+	    count = strlen(buffer);
+	    for (i=3; i <= count; i++) buffer[i-3] = buffer[i];
+	 } 
+      } 
+    } 
+  } while (checksum != xmitcsum);
+  
+}
+
+/* send the packet in buffer.  The host get's one chance to read it.  
+   This routine does not wait for a positive acknowledge.  */
+
+
+void putpacket(buffer)
+char * buffer;
+{
+  unsigned char checksum;
+  int  count;
+  char ch;
+  
+  /*  $<packet info>#<checksum>. */
+  do {
+  putDebugChar('$');
+  checksum = 0;
+  count    = 0;
+  
+  while (ch=buffer[count]) {
+    if (! putDebugChar(ch)) return;
+    checksum += ch;
+    count += 1;
+  }
+  
+  putDebugChar('#');
+  putDebugChar(hexchars[checksum >> 4]);
+  putDebugChar(hexchars[checksum % 16]);
+
+  } while (1 == 0);  /* (getDebugChar() != '+'); */
+  
+}
+
+static char  inbuffer[BUFMAX];
+static char  outbuffer[BUFMAX];
+static short error;
+
+
+void debug_error(format, parm)
+char * format;
+char * parm;
+{
+  if (remote_debug) fprintf(stderr,format,parm);
+}
+
+/* convert the memory pointed to by mem into hex, placing result in buf */
+/* return a pointer to the last char put in buf (null) */
+char* mem2hex(mem, buf, count)
+char* mem;
+char* buf;
+int   count;
+{
+      int i;
+      unsigned char ch;
+      for (i=0;i<count;i++) {
+          ch = *mem++;
+          *buf++ = hexchars[ch >> 4];
+          *buf++ = hexchars[ch % 16];
+      }
+      *buf = 0; 
+      return(buf);
+}
+
+/* convert the hex array pointed to by buf into binary to be placed in mem */
+/* return a pointer to the character AFTER the last byte written */
+char* hex2mem(buf, mem, count)
+char* buf;
+char* mem;
+int   count;
+{
+      int i;
+      unsigned char ch;
+      for (i=0;i<count;i++) {
+          ch = hex(*buf++) << 4;
+          ch = ch + hex(*buf++);
+          *mem++ = ch;
+      }
+      return(mem);
+}
+
+/* a bus error has occurred, perform a longjmp
+   to return execution and allow handling of the error */
+
+void handle_buserror()
+{
+  longjmp(env,1);
+}
+
+/* this function takes the 68000 exception number and attempts to 
+   translate this number into a unix compatible signal value */
+int computeSignal( exceptionVector )
+int exceptionVector;
+{
+  int sigval;
+  switch (exceptionVector) {
+    case 2 : sigval = 10; break; /* bus error           */
+    case 3 : sigval = 10; break; /* address error       */
+    case 4 : sigval = 4;  break; /* illegal instruction */
+    case 5 : sigval = 8;  break; /* zero divide         */
+    case 6 : sigval = 16; break; /* chk instruction     */
+    case 7 : sigval = 16; break; /* trapv instruction   */
+    case 8 : sigval = 11; break; /* privilege violation */
+    case 9 : sigval = 5;  break; /* trace trap          */
+    case 10: sigval = 4;  break; /* line 1010 emulator  */
+    case 11: sigval = 4;  break; /* line 1111 emulator  */
+    case 31: sigval = 2;  break; /* interrupt           */
+    case 33: sigval = 5;  break; /* breakpoint          */
+    case 40: sigval = 8;  break; /* floating point err  */
+    case 48: sigval = 8;  break; /* floating point err  */
+    case 49: sigval = 8;  break; /* floating point err  */
+    case 50: sigval = 8;  break; /* zero divide         */
+    case 51: sigval = 8;  break; /* underflow           */
+    case 52: sigval = 8;  break; /* operand error       */
+    case 53: sigval = 8;  break; /* overflow            */
+    case 54: sigval = 8;  break; /* NAN                 */
+    default: 
+      sigval = 7;         /* "software generated"*/
+  }
+  return (sigval);
+}
+
+/*
+ * This function does all command procesing for interfacing to gdb.
+ */
+void handle_exception(int exceptionVector)
+{
+  int    sigval;
+  int    addr, length;
+  char * ptr;
+  int    newPC;
+  Frame  *frame;
+  
+  if (remote_debug) printf("vector=%d, sr=0x%x, pc=0x%x\n", 
+			    exceptionVector,
+			    registers[ PS ], 
+			    registers[ PC ]);
+
+  /* reply to host that an exception has occurred */
+  sigval = computeSignal( exceptionVector );
+  sprintf(outbuffer,"S%02x",sigval);
+  putpacket(outbuffer); 
+
+  while (1==1) { 
+    error = 0;
+    outbuffer[0] = 0;
+    getpacket(inbuffer);
+    switch (inbuffer[0]) {
+      case '?' : sprintf(outbuffer,"S%02x",sigval);
+                 break; 
+      case 'd' : remote_debug = !(remote_debug);  /* toggle debug flag */
+                 break; 
+      case 'g' : /* return the value of the CPU registers */
+                mem2hex((char*) registers, outbuffer, NUMREGBYTES);
+                break;
+      case 'G' : /* set the value of the CPU registers - return OK */
+                hex2mem(&inbuffer[1], (char*) registers, NUMREGBYTES);
+                strcpy(outbuffer,"OK");
+                break;
+      
+      /* mAA..AA,LLLL  Read LLLL bytes at address AA..AA */
+      case 'm' : 
+	        if (setjmp(env) == 0) {
+		    exceptionHandler(2,handle_buserror); 
+
+		    if (2 == sscanf(&inbuffer[1],"%x,%x",&addr,&length)) {
+		      mem2hex((char*) addr, outbuffer, length);
+		    }
+		    else {
+		      strcpy(outbuffer,"E01");
+		      debug_error("malformed read memory command: %s",inbuffer);
+		      }     
+                } 
+		else {
+		  exceptionHandler(2,_catchException);   
+		  strcpy(outbuffer,"E03");
+		  debug_error("bus error");
+		  }     
+                
+		/* restore handler for bus error */
+		exceptionHandler(2,_catchException);   
+		break;
+      
+      /* MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK */
+      case 'M' : 
+	        if (setjmp(env) == 0) {
+		    exceptionHandler(2,handle_buserror); 
+
+		    if (2 == sscanf(&inbuffer[1],"%x,%x:",&addr,&length)) {
+		      ptr = strchr(inbuffer,':');
+		      ptr += 1; /* point 1 past the colon */
+		      hex2mem(ptr, (char*) addr, length);
+		      strcpy(outbuffer,"OK");
+		    }
+		    else {
+		      strcpy(outbuffer,"E02");
+		      debug_error("malformed write memory command: %s",inbuffer);
+		      }     
+                } 
+		else {
+		  exceptionHandler(2,_catchException);   
+		  strcpy(outbuffer,"E03");
+		  debug_error("bus error");
+		  }     
+                break;
+     
+     /* cAA..AA    Continue at address AA..AA(optional) */
+     /* sAA..AA   Step one instruction from AA..AA(optional) */
+     case 'c' : 
+     case 's' : 
+          /* try to read optional parameter, addr unchanged if no parm */
+          if (1 == sscanf(&inbuffer[1],"%x",&registers[ PC ])); 
+          newPC = registers[ PC];
+          
+          /* clear the trace bit */
+          registers[ PS ] &= 0x7fff;
+          
+          /* set the trace bit if we're stepping */
+          if (inbuffer[0] == 's') registers[ PS ] |= 0x8000;
+          
+          /*
+           * look for newPC in the linked list of exception frames.
+           * if it is found, use the old frame it.  otherwise,
+           * fake up a dummy frame in returnFromException().
+           */
+          if (remote_debug) printf("new pc = 0x%x\n",newPC);
+          frame = lastFrame;
+          while (frame)
+          {
+              if (remote_debug)
+                  printf("frame at 0x%x has pc=0x%x, except#=%d\n",
+                         frame,frame->exceptionPC,
+                         frame->exceptionVector);
+              if (frame->exceptionPC == newPC) break;  /* bingo! a match */
+              /*
+               * for a breakpoint instruction, the saved pc may
+               * be off by two due to re-executing the instruction
+               * replaced by the trap instruction.  Check for this.
+               */
+              if ((frame->exceptionVector == 33) &&
+                  (frame->exceptionPC == (newPC+2))) break;
+              frame = frame->previous;
+          }
+          
+          /*
+           * If we found a match for the PC AND we are not returning
+           * as a result of a breakpoint (33),
+           * trace exception (9), nmi (31), jmp to
+           * the old exception handler as if this code never ran.
+           */
+          if (frame) 
+          {
+              if ((frame->exceptionVector != 9)  && 
+                  (frame->exceptionVector != 31) && 
+                  (frame->exceptionVector != 33))
+              { 
+                  /*
+                   * invoke the previous handler.
+                   */
+                  if (oldExceptionHook)
+                      (*oldExceptionHook) (frame->exceptionVector);
+                  newPC = registers[ PC ];    /* pc may have changed  */
+                  if (newPC != frame->exceptionPC)
+                  {
+                      if (remote_debug)
+                          printf("frame at 0x%x has pc=0x%x, except#=%d\n",
+                                 frame,frame->exceptionPC,
+                                 frame->exceptionVector);
+                      /* dispose of this frame, we're skipping it (longjump?)*/
+                      lastFrame = frame->previous;
+                      frame = (Frame *) 0;
+                  }
+              }
+          }         
+
+          _returnFromException( frame );
+
+          break;
+          
+      /* kill the program */
+      case 'k' :  /* do nothing */
+                break;
+      } /* switch */ 
+    
+    /* reply to the request */
+    putpacket(outbuffer); 
+    }
+}
+
+
+/* this function is used to set up exception handlers for tracing and 
+   breakpoints */
+void set_debug_traps()
+{
+extern void _debug_level7();
+extern void remcomHandler();
+int exception;
+
+  for (exception = 2; exception <= 23; exception++)
+      exceptionHandler(exception,_catchException);   
+
+  /* level 7 interrupt              */
+  exceptionHandler(31,_debug_level7);    
+  
+  /* breakpoint exception (trap #1) */
+  exceptionHandler(33,_catchException);
+  
+  /* floating point error (trap #8) */
+  exceptionHandler(40,_catchException);
+  
+  /* 48 to 54 are floating point coprocessor errors */
+  for (exception = 48; exception <= 54; exception++)
+      exceptionHandler(exception,_catchException);   
+
+  if (oldExceptionHook != remcomHandler)
+  {
+      oldExceptionHook = exceptionHook;
+      exceptionHook    = remcomHandler;
+  }
+  
+  initialized = 1;
+
+  lastFrame = (Frame *) &frameStack[FRAMESIZE-1];
+  lastFrame->previous = (Frame *) 0;
+}
+
+/* This function will generate a breakpoint exception.  It is used at the
+   beginning of a program to sync up with a debugger and can be used
+   otherwise as a quick means to stop program execution and "break" into
+   the debugger. */
+   
+void breakpoint()
+{
+  if (initialized) BREAKPOINT();
+}
+
+@EOF
+
+chmod 444 remcom.c
+
+exit 0
+