* serial.h, ser-{unix,go32,tcp}.c: Add flush_input and send_break.

	* nindy-share/*, remote-nindy.c: Extensive hacking to make it
	conform to GDB conventions like using memcpy not bcopy, serial.h,
	etc.  This is to make it host on Solaris, AIX, etc.
	* Makefile.in: Reflect removed nindy-share files.

1 files changed, 174 insertions, 175 deletions

diff --git a/gdb/remote-nindy.c b/gdb/remote-nindy.c
index 55efac7..dd027bf 100644
--- a/gdb/remote-nindy.c
+++ b/gdb/remote-nindy.c
@@ -113,8 +113,11 @@ NINDY ROM monitor at the other end of the line.
 #include <sys/ioctl.h>
 #include <sys/file.h>
 #include <ctype.h>
+#include "serial.h"
+#if 0
 #include "nindy-share/ttycntl.h"
 #include "nindy-share/demux.h"
+#endif
 #include "nindy-share/env.h"
 #include "nindy-share/stop.h"
 
@@ -139,7 +142,9 @@ char *nindy_ttyname;	/* name of tty to talk to nindy on, or null */
 #define TRUE	1
 #define FALSE	0
 
-int nindy_fd = 0;	/* Descriptor for I/O to NINDY  */
+/* From nindy-share/nindy.c.  */
+extern serial_t nindy_serial;
+
 static int have_regs = 0;	/* 1 iff regs read since i960 last halted */
 static int regs_changed = 0;	/* 1 iff regs were modified since last read */
 
@@ -157,55 +162,15 @@ nindy_fetch_registers PARAMS ((int));
 static void
 nindy_store_registers PARAMS ((int));
 
-/* FIXME, we can probably use the normal terminal_inferior stuff here.
-   We have to do terminal_inferior and then set up the passthrough
-   settings initially.  Thereafter, terminal_ours and terminal_inferior
-   will automatically swap the settings around for us.  */
-
-/* Restore TTY to normal operation */
-
-static TTY_STRUCT orig_tty;	/* TTY attributes before entering passthrough */
-
-static void
-restore_tty()
-{
-	ioctl( 0, TIOCSETN, &orig_tty );
-}
-
-
-/* Recover from ^Z or ^C while remote process is running */
-
-static void (*old_ctrlc)();    /* Signal handlers before entering passthrough */
-
-#ifdef SIGTSTP
-static void (*old_ctrlz)();
-#endif
-
-static
-#ifdef USG
-void
-#endif
-cleanup()
-{
-	restore_tty();
-	signal(SIGINT, old_ctrlc);
-#ifdef SIGTSTP
-	signal(SIGTSTP, old_ctrlz);
-#endif
-	error("\n\nYou may need to reset the 80960 and/or reload your program.\n");
-}
-
-/* Clean up anything that needs cleaning when losing control.  */
-
 static char *savename;
 
 static void
 nindy_close (quitting)
      int quitting;
 {
-  if (nindy_fd)
-    close (nindy_fd);
-  nindy_fd = 0;
+  if (nindy_serial != NULL)
+    SERIAL_CLOSE (nindy_serial);
+  nindy_serial = NULL;
 
   if (savename)
     free (savename);
@@ -229,25 +194,24 @@ nindy_open (name, from_tty)
   
   nindy_close (0);
 
-	have_regs = regs_changed = 0;
-	dcache_init();
+  have_regs = regs_changed = 0;
+  dcache_init();
 
-	/* Allow user to interrupt the following -- we could hang if
-	 * there's no NINDY at the other end of the remote tty.
-	 */
-	immediate_quit++;
-	nindy_fd = ninConnect( name, baud_rate? baud_rate: "9600",
-			nindy_initial_brk, !from_tty, nindy_old_protocol );
-	immediate_quit--;
+  /* Allow user to interrupt the following -- we could hang if there's
+     no NINDY at the other end of the remote tty.  */
+  immediate_quit++;
+  ninConnect(name, baud_rate ? baud_rate : "9600",
+	     nindy_initial_brk, !from_tty, nindy_old_protocol);
+  immediate_quit--;
 
-	if ( nindy_fd < 0 ){
-		nindy_fd = 0;
-		error( "Can't open tty '%s'", name );
-	}
+  if (nindy_serial == NULL)
+    {
+      perror_with_name (name);
+    }
 
-        savename = savestring (name, strlen (name));
-	push_target (&nindy_ops);
-	target_fetch_registers(-1);
+  savename = savestring (name, strlen (name));
+  push_target (&nindy_ops);
+  target_fetch_registers(-1);
 }
 
 /* User-initiated quit of nindy operations.  */
@@ -307,6 +271,27 @@ nindy_resume (step, siggnal)
 	have_regs = 0;
 	ninGo( step );
 }
+
+/* FIXME, we can probably use the normal terminal_inferior stuff here.
+   We have to do terminal_inferior and then set up the passthrough
+   settings initially.  Thereafter, terminal_ours and terminal_inferior
+   will automatically swap the settings around for us.  */
+
+struct clean_up_tty_args {
+  serial_ttystate state;
+  serial_t serial;
+};
+
+static void
+clean_up_tty (ptrarg)
+     PTR ptrarg;
+{
+  struct clean_up_tty_args *args = (struct clean_up_tty_args *) ptrarg;
+  SERIAL_SET_TTY_STATE (args->serial, args->state);
+  free (args->state);
+  warning ("\n\n\
+You may need to reset the 80960 and/or reload your program.\n");
+}
 
 /* Wait until the remote machine stops. While waiting, operate in passthrough
  * mode; i.e., pass everything NINDY sends to stdout, and everything from
@@ -319,107 +304,120 @@ static int
 nindy_wait( status )
     WAITTYPE *status;
 {
-	DEMUX_DECL;	/* OS-dependent data needed by DEMUX... macros */
-	char buf[500];	/* FIXME, what is "500" here? */
-	int i, n;
-	unsigned char stop_exit;
-	unsigned char stop_code;
-	TTY_STRUCT tty;
-	long ip_value, fp_value, sp_value;	/* Reg values from stop */
-
-
-	WSETEXIT( (*status), 0 );
-
-	/* OPERATE IN PASSTHROUGH MODE UNTIL NINDY SENDS A DLE CHARACTER */
-
-	/* Save current tty attributes, set up signals to restore them.
-	 */
-	ioctl( 0, TIOCGETP, &orig_tty );
-	old_ctrlc = signal( SIGINT, cleanup );
-#ifdef SIGTSTP
-	old_ctrlz = signal( SIGTSTP, cleanup );
-#endif
-
-	/* Pass input from keyboard to NINDY as it arrives.
-	 * NINDY will interpret <CR> and perform echo.
-	 */
-	tty = orig_tty;
-	TTY_NINDYTERM( tty );
-	ioctl( 0, TIOCSETN, &tty );
-
-	while ( 1 ){
-		/* Go to sleep until there's something for us on either
-		 * the remote port or stdin.
-		 */
-
-		DEMUX_WAIT( nindy_fd );
-
-		/* Pass input through to correct place */
+  fd_set fds;
+  char buf[500];	/* FIXME, what is "500" here? */
+  int i, n;
+  unsigned char stop_exit;
+  unsigned char stop_code;
+  struct clean_up_tty_args tty_args;
+  struct cleanup *old_cleanups;
+  long ip_value, fp_value, sp_value;	/* Reg values from stop */
+
+  WSETEXIT( (*status), 0 );
+
+  /* OPERATE IN PASSTHROUGH MODE UNTIL NINDY SENDS A DLE CHARACTER */
+
+  /* Save current tty attributes, and restore them when done.  */
+  tty_args.serial = SERIAL_FDOPEN (0);
+  tty_args.state = SERIAL_GET_TTY_STATE (tty_args.serial);
+  old_cleanups = make_cleanup (clean_up_tty, &tty_args);
+
+  /* Pass input from keyboard to NINDY as it arrives.  NINDY will interpret
+     <CR> and perform echo.  */
+  /* This used to set CBREAK and clear ECHO and CRMOD.  I hope this is close
+     enough.  */
+  SERIAL_RAW (tty_args.serial);
+
+  while (1)
+    {
+      /* Wait for input on either the remote port or stdin.  */
+      FD_ZERO (&fds);
+      FD_SET (0, &fds);
+      FD_SET (nindy_serial->fd, &fds);
+      if (select (nindy_serial->fd + 1, &fds, 0, 0, 0) <= 0)
+	continue;
+
+      /* Pass input through to correct place */
+      if (FD_ISSET (0, &fds))
+	{
+	  /* Input on stdin */
+	  n = read (0, buf, sizeof (buf));
+	  if (n)
+	    {
+	      SERIAL_WRITE (nindy_serial, buf, n );
+	    }
+	}
 
-		n = DEMUX_READ( 0, buf, sizeof(buf) );
-		if ( n ){				/* Input on stdin */
-			write( nindy_fd, buf, n );
+      if (FD_ISSET (nindy_serial->fd, &fds))
+	{
+	  /* Input on remote */
+	  n = read (nindy_serial->fd, buf, sizeof (buf));
+	  if (n)
+	    {
+	      /* Write out any characters in buffer preceding DLE */
+	      i = non_dle( buf, n );
+	      if ( i > 0 )
+		{
+		  write (1, buf, i);
 		}
 
-		n = DEMUX_READ( nindy_fd, buf, sizeof(buf) );
-		if ( n ){				/* Input on remote */
-			/* Write out any characters in buffer preceding DLE */
-			i = non_dle( buf, n );
-			if ( i > 0 ){
-				write( 1, buf, i );
-			}
-
-			if ( i != n ){
-				/* There *was* a DLE in the buffer */
-				stop_exit = ninStopWhy( &stop_code,
-					&ip_value, &fp_value, &sp_value);
-				if ( !stop_exit && (stop_code==STOP_SRQ) ){
-					immediate_quit++;
-					ninSrq();
-					immediate_quit--;
-				} else {
-					/* Get out of loop */
-					supply_register (IP_REGNUM, 
-							 (char *)&ip_value);
-					supply_register (FP_REGNUM, 
-							 (char *)&fp_value);
-					supply_register (SP_REGNUM, 
-							 (char *)&sp_value);
-					break;
-				}
-			}
+	      if (i != n)
+		{
+		  /* There *was* a DLE in the buffer */
+		  stop_exit = ninStopWhy(&stop_code,
+					 &ip_value, &fp_value, &sp_value);
+		  if (!stop_exit && (stop_code == STOP_SRQ))
+		    {
+		      immediate_quit++;
+		      ninSrq();
+		      immediate_quit--;
+		    }
+		  else
+		    {
+		      /* Get out of loop */
+		      supply_register (IP_REGNUM, 
+				       (char *)&ip_value);
+		      supply_register (FP_REGNUM, 
+				       (char *)&fp_value);
+		      supply_register (SP_REGNUM, 
+				       (char *)&sp_value);
+		      break;
+		    }
 		}
+	    }
 	}
+    }
 
-	signal( SIGINT, old_ctrlc );
-#ifdef SIGTSTP
-	signal( SIGTSTP, old_ctrlz );
-#endif
-	restore_tty();
-
-	if ( stop_exit ){			/* User program exited */
-		WSETEXIT( (*status), stop_code );
-	} else {				/* Fault or trace */
-		switch (stop_code){
-		case STOP_GDB_BPT:
-		case TRACE_STEP:
-			/* Make it look like a VAX trace trap */
-			stop_code = SIGTRAP;
-			break;
-		default:
-			/* The target is not running Unix, and its
-			   faults/traces do not map nicely into Unix signals.
-			   Make sure they do not get confused with Unix signals
-			   by numbering them with values higher than the highest
-			   legal Unix signal.  code in i960_print_fault(),
-			   called via PRINT_RANDOM_SIGNAL, will interpret the
-			   value.  */
-			stop_code += NSIG;
-			break;
-		}
-		WSETSTOP( (*status), stop_code );
+  do_cleanups (old_cleanups);
+
+  if (stop_exit)
+    {
+      /* User program exited */
+      WSETEXIT ((*status), stop_code);
+    }
+  else
+    {
+      /* Fault or trace */
+      switch (stop_code)
+	{
+	case STOP_GDB_BPT:
+	case TRACE_STEP:
+	  /* Breakpoint or single stepping.  */
+	  stop_code = SIGTRAP;
+	  break;
+	default:
+	  /* The target is not running Unix, and its faults/traces do
+	     not map nicely into Unix signals.  Make sure they do not
+	     get confused with Unix signals by numbering them with
+	     values higher than the highest legal Unix signal.  code
+	     in i960_print_fault(), called via PRINT_RANDOM_SIGNAL,
+	     will interpret the value.  */
+	  stop_code += NSIG;
+	  break;
 	}
-	return inferior_pid;
+      WSETSTOP ((*status), stop_code);
+    }
+  return inferior_pid;
 }
 
 /* Read the remote registers into the block REGS.  */
@@ -446,11 +444,11 @@ nindy_fetch_registers(regno)
   ninRegsGet( (char *) &nindy_regs );
   immediate_quit--;
 
-  bcopy (nindy_regs.local_regs, &registers[REGISTER_BYTE (R0_REGNUM)], 16*4);
-  bcopy (nindy_regs.global_regs, &registers[REGISTER_BYTE (G0_REGNUM)], 16*4);
-  bcopy (nindy_regs.pcw_acw, &registers[REGISTER_BYTE (PCW_REGNUM)], 2*4);
-  bcopy (nindy_regs.ip, &registers[REGISTER_BYTE (IP_REGNUM)], 1*4);
-  bcopy (nindy_regs.tcw, &registers[REGISTER_BYTE (TCW_REGNUM)], 1*4);
+  memcpy (&registers[REGISTER_BYTE (R0_REGNUM)], nindy_regs.local_regs, 16*4);
+  memcpy (&registers[REGISTER_BYTE (G0_REGNUM)], nindy_regs.global_regs, 16*4);
+  memcpy (&registers[REGISTER_BYTE (PCW_REGNUM)], nindy_regs.pcw_acw, 2*4);
+  memcpy (&registers[REGISTER_BYTE (IP_REGNUM)], nindy_regs.ip, 1*4);
+  memcpy (&registers[REGISTER_BYTE (TCW_REGNUM)], nindy_regs.tcw, 1*4);
   for (regnum = FP0_REGNUM; regnum < FP0_REGNUM + 4; regnum++) {
     dub = unpack_double (builtin_type_double,
 			 &nindy_regs.fp_as_double[8 * (regnum - FP0_REGNUM)],
@@ -478,11 +476,11 @@ nindy_store_registers(regno)
   int regnum, inv;
   double dub;
 
-  bcopy (&registers[REGISTER_BYTE (R0_REGNUM)], nindy_regs.local_regs,  16*4);
-  bcopy (&registers[REGISTER_BYTE (G0_REGNUM)], nindy_regs.global_regs, 16*4);
-  bcopy (&registers[REGISTER_BYTE (PCW_REGNUM)], nindy_regs.pcw_acw,     2*4);
-  bcopy (&registers[REGISTER_BYTE (IP_REGNUM)], nindy_regs.ip,           1*4);
-  bcopy (&registers[REGISTER_BYTE (TCW_REGNUM)], nindy_regs.tcw,         1*4);
+  memcpy (nindy_regs.local_regs, &registers[REGISTER_BYTE (R0_REGNUM)], 16*4);
+  memcpy (nindy_regs.global_regs, &registers[REGISTER_BYTE (G0_REGNUM)], 16*4);
+  memcpy (nindy_regs.pcw_acw, &registers[REGISTER_BYTE (PCW_REGNUM)], 2*4);
+  memcpy (nindy_regs.ip, &registers[REGISTER_BYTE (IP_REGNUM)], 1*4);
+  memcpy (nindy_regs.tcw, &registers[REGISTER_BYTE (TCW_REGNUM)], 1*4);
   /* Float regs.  Only works on IEEE_FLOAT hosts.  FIXME!  */
   for (regnum = FP0_REGNUM; regnum < FP0_REGNUM + 4; regnum++) {
     ieee_extended_to_double (&ext_format_i960,
@@ -493,8 +491,7 @@ nindy_store_registers(regno)
        This mostly works but not quite.  */
     dub = unpack_double (builtin_type_double, (char *)&dub, &inv);
     /* dub now in target byte order */
-    bcopy ((char *)&dub, &nindy_regs.fp_as_double[8 * (regnum - FP0_REGNUM)],
-	8);
+    memcpy (&nindy_regs.fp_as_double[8 * (regnum - FP0_REGNUM)], &dub, 8);
   }
 
   immediate_quit++;
@@ -565,7 +562,7 @@ nindy_xfer_inferior_memory(memaddr, myaddr, len, write, target)
 
       /* Copy data to be written over corresponding part of buffer */
 
-      bcopy (myaddr, (char *) buffer + (memaddr & (sizeof (int) - 1)), len);
+      memcpy ((char *) buffer + (memaddr & (sizeof (int) - 1)), myaddr, len);
 
       /* Write the entire buffer.  */
 
@@ -590,7 +587,7 @@ nindy_xfer_inferior_memory(memaddr, myaddr, len, write, target)
 	}
 
       /* Copy appropriate bytes out of the buffer.  */
-      bcopy ((char *) buffer + (memaddr & (sizeof (int) - 1)), myaddr, len);
+      memcpy (myaddr, (char *) buffer + (memaddr & (sizeof (int) - 1)), len);
     }
   return len;
 }
@@ -808,13 +805,15 @@ reset_command(args, from_tty)
      char *args;
      int from_tty;
 {
-	if ( !nindy_fd ){
-	    error( "No target system to reset -- use 'target nindy' command.");
-	}
-	if ( query("Really reset the target system?",0,0) ){
-		send_break( nindy_fd );
-		tty_flush( nindy_fd );
-	}
+  if (nindy_serial == NULL)
+    {
+      error( "No target system to reset -- use 'target nindy' command.");
+    }
+  if ( query("Really reset the target system?",0,0) )
+    {
+      SERIAL_SEND_BREAK (nindy_serial);
+      tty_flush (nindy_serial);
+    }
 }
 
 void