* Rename files for 14-character limits:

	gdbserver/remote-gutils.c -> gdbserver/utils.c
	gdbserver/remote-inflow.c -> gdbserver/low-lynx.c
	gdbserver/remote-inflow-sparc.c -> gdbserver/low-sparc.c
	gdbserver/remote-server.c -> gdbserver/server.c
	remote-monitor.c -> remote-mon.c
	* Makefile.in, gdbserver/Makefile.in, config/m68k/monitor.mt:
	Change accordingly.
	* gdbserver/Makefile.in: Remove more junk inherited from gdb Makefile.

1 files changed, 1209 insertions, 0 deletions

diff --git a/gdb/remote-mon.c b/gdb/remote-mon.c
new file mode 100644
index 0000000..d9367a8
--- /dev/null
+++ b/gdb/remote-mon.c
@@ -0,0 +1,1209 @@
+/* Remote debugging interface for MONITOR boot monitor, for GDB.
+   Copyright 1990, 1991, 1992, 1993 Free Software Foundation, Inc.
+   Contributed by Cygnus Support. Written by Rob Savoye for Cygnus.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+/* This file was derived from remote-eb.c, which did a similar job, but for
+   an AMD-29K running EBMON.  That file was in turn derived from remote.c
+   as mentioned in the following comment (left in for comic relief):
+
+  "This is like remote.c but is for an esoteric situation--
+   having an a29k board in a PC hooked up to a unix machine with
+   a serial line, and running ctty com1 on the PC, through which
+   the unix machine can run ebmon.  Not to mention that the PC
+   has PC/NFS, so it can access the same executables that gdb can,
+   over the net in real time."
+
+   In reality, this module talks to a debug monitor called 'MONITOR', which
+   We communicate with MONITOR via either a direct serial line, or a TCP
+   (or possibly TELNET) stream to a terminal multiplexor,
+   which in turn talks to the target board.
+
+   This is based on remote-st2000.c. I left in the above note here for histerical
+   reasons.
+*/
+
+#include "defs.h"
+#include "gdbcore.h"
+#include "target.h"
+#include "wait.h"
+#include <varargs.h>
+#include <signal.h>
+#include <string.h>
+#include <sys/types.h>
+#include "command.h"
+#include "serial.h"
+#include "monitor.h"
+
+#ifdef HAVE_TERMIO
+#  define TERMINAL struct termios
+#else
+#  define TERMINAL struct sgttyb
+#endif
+
+struct monitor_ops *current_monitor;
+extern struct target_ops rom68k_ops;		/* Forward declaration */
+extern struct target_ops mon68_ops;		/* Forward declaration */
+extern struct target_ops monitor_bug_ops;	/* Forward declaration */
+extern struct monitor_ops rom68k_cmds;		/* Forward declaration */
+extern struct monitor_ops mon68_cmds;		/* Forward declaration */
+extern struct monitor_ops bug_cmds;		/* Forward declaration */
+extern struct cmd_list_element *setlist;
+extern struct cmd_list_element *unsetlist;
+struct cmd_list_element *showlist;
+
+static void monitor_close();
+static void monitor_fetch_register();
+static void monitor_store_register();
+static int kiodebug;				/* flag set by "set remotedebug" */
+static int hashmark;				/* flag set by "set hash" */
+
+#define LOG_FILE "monitor.log"
+#if defined (LOG_FILE)
+FILE *log_file;
+#endif
+
+static int timeout = 24;
+
+/* Descriptor for I/O to remote machine.  Initialize it to NULL so that
+   monitor_open knows that we don't have a file open when the program starts.
+   */
+static serial_t monitor_desc = NULL;
+
+/* Send data to monitor.  Works just like printf. */
+
+static void
+printf_monitor(va_alist)
+     va_dcl
+{
+  va_list args;
+  char *pattern;
+  char buf[200];
+  int i;
+
+  va_start(args);
+
+  pattern = va_arg(args, char *);
+
+  vsprintf(buf, pattern, args);
+
+  if (SERIAL_WRITE(monitor_desc, buf, strlen(buf)))
+    fprintf(stderr, "SERIAL_WRITE failed: %s\n", safe_strerror(errno));
+}
+
+/* Read a character from the remote system, doing all the fancy
+   timeout stuff.  */
+static int
+readchar(timeout)
+     int timeout;
+{
+  int c;
+
+  c = SERIAL_READCHAR(monitor_desc, timeout);
+
+  if (kiodebug)
+    putchar(c & 0x7f);
+
+#ifdef LOG_FILE
+  if (isascii (c))
+    putc(c & 0x7f, log_file);
+#endif
+
+  if (c >= 0)
+    return c & 0x7f;
+
+  if (c == SERIAL_TIMEOUT)
+    {
+      if (timeout == 0)
+	return c;		/* Polls shouldn't generate timeout errors */
+
+      error("Timeout reading from remote system.");
+    }
+
+  perror_with_name("remote-monitor");
+}
+
+/* Scan input from the remote system, until STRING is found.  If DISCARD is
+   non-zero, then discard non-matching input, else print it out.
+   Let the user break out immediately.  */
+static void
+expect(string, discard)
+     char *string;
+     int discard;
+{
+  char *p = string;
+  int c;
+
+  if (kiodebug)
+    printf ("Expecting \"%s\"\n", string);
+
+  immediate_quit = 1;
+  while (1)
+    {
+      c = readchar(timeout);
+      if (!isascii (c))
+	continue;
+      if (c == *p++)
+	{
+	  if (*p == '\0')
+	    {
+	      immediate_quit = 0;
+	      if (kiodebug)
+		printf ("\nMatched\n");
+	      return;
+	    }
+	}
+      else
+	{
+	  if (!discard)
+	    {
+	      fwrite(string, 1, (p - 1) - string, stdout);
+	      putchar((char)c);
+	      fflush(stdout);
+	    }
+	  p = string;
+	}
+    }
+}
+
+/* Keep discarding input until we see the MONITOR prompt.
+
+   The convention for dealing with the prompt is that you
+   o give your command
+   o *then* wait for the prompt.
+
+   Thus the last thing that a procedure does with the serial line
+   will be an expect_prompt().  Exception:  monitor_resume does not
+   wait for the prompt, because the terminal is being handed over
+   to the inferior.  However, the next thing which happens after that
+   is a monitor_wait which does wait for the prompt.
+   Note that this includes abnormal exit, e.g. error().  This is
+   necessary to prevent getting into states from which we can't
+   recover.  */
+static void
+expect_prompt(discard)
+     int discard;
+{
+#if defined (LOG_FILE)
+  /* This is a convenient place to do this.  The idea is to do it often
+     enough that we never lose much data if we terminate abnormally.  */
+  fflush(log_file);
+#endif
+  expect (PROMPT, discard);
+}
+
+/* Get a hex digit from the remote system & return its value.
+   If ignore_space is nonzero, ignore spaces (not newline, tab, etc).  */
+static int
+get_hex_digit(ignore_space)
+     int ignore_space;
+{
+  int ch;
+  while (1)
+    {
+      ch = readchar(timeout);
+      if (ch >= '0' && ch <= '9')
+	return ch - '0';
+      else if (ch >= 'A' && ch <= 'F')
+	return ch - 'A' + 10;
+      else if (ch >= 'a' && ch <= 'f')
+	return ch - 'a' + 10;
+      else if (ch == ' ' && ignore_space)
+	;
+      else
+	{
+	  expect_prompt(1);
+	  error("Invalid hex digit from remote system.");
+	}
+    }
+}
+
+/* Get a byte from monitor and put it in *BYT.  Accept any number
+   leading spaces.  */
+static void
+get_hex_byte (byt)
+     char *byt;
+{
+  int val;
+
+  val = get_hex_digit (1) << 4;
+  val |= get_hex_digit (0);
+  *byt = val;
+}
+
+/* Get N 32-bit words from remote, each preceded by a space,
+   and put them in registers starting at REGNO.  */
+static void
+get_hex_regs (n, regno)
+     int n;
+     int regno;
+{
+  long val;
+  int i;
+
+  for (i = 0; i < n; i++)
+    {
+      int j;
+      
+      val = 0;
+      for (j = 0; j < 8; j++)
+	val = (val << 4) + get_hex_digit (j == 0);
+      supply_register (regno++, (char *) &val);
+    }
+}
+
+/* This is called not only when we first attach, but also when the
+   user types "run" after having attached.  */
+static void
+monitor_create_inferior (execfile, args, env)
+     char *execfile;
+     char *args;
+     char **env;
+{
+  int entry_pt;
+
+  if (args && *args)
+    error("Can't pass arguments to remote MONITOR process");
+
+  if (execfile == 0 || exec_bfd == 0)
+    error("No exec file specified");
+
+  entry_pt = (int) bfd_get_start_address (exec_bfd);
+
+#ifdef CREATE_INFERIOR_HOOK
+  CREATE_INFERIOR_HOOK (0);		/* No process-ID */
+#endif  
+#ifdef LOG_FILE
+  fputs ("\nIn Create_inferior()", log_file);
+#endif
+
+/* The "process" (board) is already stopped awaiting our commands, and
+   the program is already downloaded.  We just set its PC and go.  */
+
+  clear_proceed_status ();
+
+  /* Tell wait_for_inferior that we've started a new process.  */
+  init_wait_for_inferior ();
+
+  /* Set up the "saved terminal modes" of the inferior
+     based on what modes we are starting it with.  */
+  target_terminal_init ();
+
+  /* Install inferior's terminal modes.  */
+  target_terminal_inferior ();
+
+  /* insert_step_breakpoint ();  FIXME, do we need this?  */
+  proceed ((CORE_ADDR)entry_pt, -1, 0);		/* Let 'er rip... */
+}
+
+/* Open a connection to a remote debugger.
+   NAME is the filename used for communication.  */
+
+static int baudrate = 9600;
+static char dev_name[100];
+
+static void
+general_open(args, name, from_tty)
+     char *args;
+     char *name;
+     int from_tty;
+{
+  if (args == NULL)
+    error ("Use `target %s DEVICE-NAME' to use a serial port, or \n\
+`target %s HOST-NAME:PORT-NUMBER' to use a network connection.", name, name);
+
+  target_preopen(from_tty);
+
+  monitor_close(0);
+
+  monitor_desc = SERIAL_OPEN(dev_name);
+
+  if (monitor_desc == NULL)
+    perror_with_name(dev_name);
+
+  /* The baud rate was specified when GDB was started.  */
+  if (baud_rate)
+    {
+      int rate;
+
+      if (sscanf (baud_rate, "%d", &rate) == 1)
+	if (SERIAL_SETBAUDRATE (monitor_desc, rate))
+	  {
+	    SERIAL_CLOSE (monitor_desc);
+	    perror_with_name (name);
+	  }
+    }
+
+  SERIAL_RAW(monitor_desc);
+
+#if defined (LOG_FILE)
+  log_file = fopen (LOG_FILE, "w");
+  if (log_file == NULL)
+    perror_with_name (LOG_FILE);
+#endif
+
+  /* Hello?  Are you there?  */
+  printf_monitor("\r");	/* CR wakes up monitor */
+  
+  expect_prompt(1);
+
+  if (from_tty)
+    printf("Remote %s connected to %s\n", target_shortname,
+	   dev_name);
+}
+
+static void
+rom68k_open(args, from_tty)
+     char *args;
+     int from_tty;
+{
+  push_target(&rom68k_ops);
+  push_monitor (&rom68k_cmds);
+
+  general_open (args, "rom68k", from_tty);
+}
+
+static void
+mon68_open(args, from_tty)
+     char *args;
+     int from_tty;
+{
+  push_target(&mon68_ops);
+  push_monitor (&mon68_cmds);
+
+  general_open (args, "mon68", from_tty);
+}
+
+static void
+bug_open(args, from_tty)
+     char *args;
+     int from_tty;
+{
+  push_target(&monitor_bug_ops);
+  push_monitor (&bug_cmds);
+
+  general_open (args, "bug", from_tty);
+}
+
+/*
+ * _close -- Close out all files and local state before this target loses control.
+ */
+
+static void
+monitor_close (quitting)
+     int quitting;
+{
+  SERIAL_CLOSE(monitor_desc);
+  monitor_desc = NULL;
+
+#if defined (LOG_FILE)
+  if (log_file) {
+    if (ferror(log_file))
+      fprintf(stderr, "Error writing log file.\n");
+    if (fclose(log_file) != 0)
+      fprintf(stderr, "Error closing log file.\n");
+  }
+#endif
+}
+
+/* Terminate the open connection to the remote debugger.
+   Use this when you want to detach and do something else
+   with your gdb.  */
+static void
+monitor_detach (from_tty)
+     int from_tty;
+{
+  pop_target();		/* calls monitor_close to do the real work */
+  if (from_tty)
+    printf ("Ending remote %s debugging\n", target_shortname);
+}
+ 
+/*
+ * _resume -- Tell the remote machine to resume.
+ */
+static void
+monitor_resume (pid, step, sig)
+     int pid, step, sig;
+{
+#ifdef LOG_FILE
+  fprintf (log_file, "\nIn Resume (step=%d, sig=%d)\n", step, sig);
+#endif
+
+  if (step)
+    {
+      printf_monitor (STEP_CMD);
+      /* wait for the echo.  */
+      expect (STEP_CMD, 1);
+    }
+  else
+    {
+      printf_monitor (GO_CMD);
+      /* swallow the echo.  */
+      expect (GO_CMD, 1);
+    }
+}
+
+/*
+ * _wait -- Wait until the remote machine stops, then return,
+ *          storing status in status just as `wait' would.
+ */
+
+static int
+monitor_wait (status)
+     WAITTYPE *status;
+{
+  int old_timeout = timeout;
+#ifdef LOG_FILE
+  fputs ("\nIn wait ()", log_file);
+#endif
+
+  WSETEXIT ((*status), 0);
+
+  timeout = 0;		/* Don't time out -- user program is running. */
+
+  expect_prompt(0);    /* Wait for prompt, outputting extraneous text */
+
+  WSETSTOP ((*status), SIGTRAP);
+
+  timeout = old_timeout;
+
+  return 0;
+}
+
+/* Return the name of register number regno in the form input and output by
+   monitor.  Currently, register_names just happens to contain exactly what
+   monitor wants.  Lets take advantage of that just as long as possible! */
+
+static char *
+get_reg_name (regno)
+     int regno;
+{
+  static char buf[50];
+  const char *p;
+  char *b;
+
+  b = buf;
+
+  if (regno < 0)
+    return ("");
+  for (p = reg_names[regno]; *p; p++)
+    *b++ = toupper(*p);
+  *b = '\000';
+
+  return buf;
+}
+
+/* read the remote registers into the block regs.  */
+
+static void
+monitor_fetch_registers ()
+{
+  int regno;
+
+  /* yeah yeah, i know this is horribly inefficient.  but it isn't done
+     very often...  i'll clean it up later.  */
+
+  for (regno = 0; regno <= PC_REGNUM; regno++)
+    monitor_fetch_register(regno);
+}
+
+/* Fetch register REGNO, or all registers if REGNO is -1.
+   Returns errno value.  */
+static void
+monitor_fetch_register (regno)
+     int regno;
+{
+  int val, j;
+
+#ifdef LOG_FILE
+  fprintf (log_file, "\nIn Fetch Register (reg=%s)\n", get_reg_name (regno));
+  fflush (log_file);
+#endif
+
+  if (regno < 0)
+    {
+      monitor_fetch_registers ();
+    }
+  else
+    {
+      char *name = get_reg_name (regno);
+      printf_monitor (GET_REG, name);
+      expect (name, 1);
+      expect (REG_DELIM, 1);
+      if (strcasecmp (name, "SR") == 0)
+	{
+	  val = 0;
+	  for (j = 0; j < 4; j++)
+	    val = (val << 4) + get_hex_digit (j == 0);
+	  supply_register (regno, (char *) &val);
+	}
+      else
+	{
+	  get_hex_regs (1, regno);
+	}
+      if (CMD_END) 
+	{
+	  expect (CMD_DELIM);
+	  printf_monitor (CMD_END);
+	}
+      expect_prompt (1);
+    }
+  return;
+}
+
+/* Store the remote registers from the contents of the block REGS.  */
+
+static void
+monitor_store_registers ()
+{
+  int regno;
+
+  for (regno = 0; regno <= PC_REGNUM; regno++)
+    monitor_store_register(regno);
+
+  registers_changed ();
+}
+
+/* Store register REGNO, or all if REGNO == 0.
+   return errno value.  */
+static void
+monitor_store_register (regno)
+     int regno;
+{
+#ifdef LOG_FILE
+  fprintf (log_file, "\nIn Store_register (regno=%d)\n", regno);
+#endif
+  if (regno == -1)
+    monitor_store_registers ();
+  else
+    {
+      if (kiodebug)
+	printf ("Setting register %s to 0x%x\n", get_reg_name (regno), read_register (regno));
+
+      printf_monitor (SET_REG, get_reg_name (regno),
+		      read_register (regno));
+
+      expect_prompt (1);
+    }
+}
+
+/* Get ready to modify the registers array.  On machines which store
+   individual registers, this doesn't need to do anything.  On machines
+   which store all the registers in one fell swoop, this makes sure
+   that registers contains all the registers from the program being
+   debugged.  */
+
+static void
+monitor_prepare_to_store ()
+{
+  /* Do nothing, since we can store individual regs */
+}
+
+static void
+monitor_files_info ()
+{
+  printf ("\tAttached to %s at %d baud.\n",
+	  dev_name, baudrate);
+}
+
+/* Copy LEN bytes of data from debugger memory at MYADDR
+   to inferior's memory at MEMADDR.  Returns length moved.  */
+static int
+monitor_write_inferior_memory (memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     unsigned char *myaddr;
+     int len;
+{
+  int i;
+  char buf[10];
+
+#ifdef LOG_FILE
+  fprintf (log_file, "\nIn Write_inferior_memory (memaddr=%x, len=%d)\n", memaddr, len);
+#endif
+  for (i = 0; i < len; i++)
+    {
+      printf_monitor (MEM_SET_CMD, memaddr + i);
+      expect (sprintf (buf, MEM_PROMPT, memaddr + i), 1); 
+      expect (CMD_DELIM);
+      printf_monitor ("%x", myaddr[i]);
+      if (kiodebug)
+	printf ("\nSet 0x%x to 0x%x\n", memaddr + i, myaddr[i]);
+      if (CMD_END)
+	{
+/***	  expect (sprintf (buf, MEM_PROMPT, memaddr + i +1), 1); 	  
+	  expect (CMD_DELIM); ***/
+	  printf_monitor (CMD_END);
+	}
+      expect_prompt (1);
+    }
+  return len;
+}
+
+/* Read LEN bytes from inferior memory at MEMADDR.  Put the result
+   at debugger address MYADDR.  Returns length moved.  */
+static int
+monitor_read_inferior_memory(memaddr, myaddr, len)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+{
+  int i, j;
+  char buf[20];
+
+  /* Number of bytes read so far.  */
+  int count;
+
+  /* Starting address of this pass.  */
+  unsigned long startaddr;
+
+  /* Number of bytes to read in this pass.  */
+  int len_this_pass;
+
+#ifdef LOG_FILE
+  fprintf (log_file, "\nIn Read_inferior_memory (memaddr=%x, len=%d)\n", memaddr, len);
+#endif
+
+  /* Note that this code works correctly if startaddr is just less
+     than UINT_MAX (well, really CORE_ADDR_MAX if there was such a
+     thing).  That is, something like
+     monitor_read_bytes (CORE_ADDR_MAX - 4, foo, 4)
+     works--it never adds len To memaddr and gets 0.  */
+  /* However, something like
+     monitor_read_bytes (CORE_ADDR_MAX - 3, foo, 4)
+     doesn't need to work.  Detect it and give up if there's an attempt
+     to do that.  */
+  if (((memaddr - 1) + len) < memaddr) {
+    errno = EIO;
+    return 0;
+  }
+  
+  startaddr = memaddr;
+  count = 0;
+  while (count < len)
+    {
+      len_this_pass = 16;
+      if ((startaddr % 16) != 0)
+	len_this_pass -= startaddr % 16;
+      if (len_this_pass > (len - count))
+	len_this_pass = (len - count);
+      if (kiodebug)
+	printf ("\nDisplay %d bytes at %x\n", len_this_pass, startaddr);
+
+      for (i = 0; i < len_this_pass; i++)
+	{
+	  printf_monitor (MEM_DIS_CMD, startaddr);
+	  expect (sprintf(buf, MEM_PROMPT, startaddr), 1);
+	  get_hex_byte (&myaddr[count++]);
+	  if (kiodebug)
+	    printf ("\nRead a 0x%x from 0x%x\n", myaddr[count-1], startaddr);
+	  if (CMD_END) 
+	    {
+	      expect (CMD_DELIM);
+	      printf_monitor (CMD_END);
+	    }
+	  expect_prompt (1);
+	  startaddr += 1;
+	}
+    }
+  return len;
+}
+
+/* FIXME-someday!  merge these two.  */
+static int
+monitor_xfer_inferior_memory (memaddr, myaddr, len, write, target)
+     CORE_ADDR memaddr;
+     char *myaddr;
+     int len;
+     int write;
+     struct target_ops *target;		/* ignored */
+{
+  if (write)
+    return monitor_write_inferior_memory (memaddr, myaddr, len);
+  else
+    return monitor_read_inferior_memory (memaddr, myaddr, len);
+}
+
+static void
+monitor_kill (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  return;		/* ignore attempts to kill target system */
+}
+
+/* Clean up when a program exits.
+   The program actually lives on in the remote processor's RAM, and may be
+   run again without a download.  Don't leave it full of breakpoint
+   instructions.  */
+
+static void
+monitor_mourn_inferior ()
+{
+  remove_breakpoints ();
+  generic_mourn_inferior ();	/* Do all the proper things now */
+}
+
+#define MAX_MONITOR_BREAKPOINTS 16
+
+extern int memory_breakpoint_size;
+static CORE_ADDR breakaddr[MAX_MONITOR_BREAKPOINTS] = {0};
+
+static int
+monitor_insert_breakpoint (addr, shadow)
+     CORE_ADDR addr;
+     char *shadow;
+{
+  int i;
+
+#ifdef LOG_FILE
+  fprintf (log_file, "\nIn Insert_breakpoint (addr=%x)\n", addr);
+#endif
+  for (i = 0; i <= MAX_MONITOR_BREAKPOINTS; i++)
+    if (breakaddr[i] == 0)
+      {
+	breakaddr[i] = addr;
+	if (kiodebug)
+	  printf ("Breakpoint at %x\n", addr);
+	monitor_read_inferior_memory(addr, shadow, memory_breakpoint_size);
+	printf_monitor(SET_BREAK_CMD, addr);
+	expect_prompt(1);
+	return 0;
+      }
+
+  fprintf(stderr, "Too many breakpoints (> 16) for monitor\n");
+  return 1;
+}
+
+/*
+ * _remove_breakpoint -- Tell the monitor to remove a breakpoint
+ */
+static int
+monitor_remove_breakpoint (addr, shadow)
+     CORE_ADDR addr;
+     char *shadow;
+{
+  int i;
+
+#ifdef LOG_FILE
+  fprintf (log_file, "\nIn Remove_breakpoint (addr=%x)\n", addr);
+#endif
+  for (i = 0; i < MAX_MONITOR_BREAKPOINTS; i++)
+    if (breakaddr[i] == addr)
+      {
+	breakaddr[i] = 0;
+	/* some monitors remove breakpoints based on the address */
+	if (strcasecmp (target_shortname, "bug") == 0)   
+	    printf_monitor(CLR_BREAK_CMD, addr);
+	  else
+	    printf_monitor(CLR_BREAK_CMD, i);
+	expect_prompt(1);
+	return 0;
+      }
+
+  fprintf(stderr, "Can't find breakpoint associated with 0x%x\n", addr);
+  return 1;
+}
+
+/* Load a file. This is usually an srecord, which is ascii. No 
+   protocol, just sent line by line. */
+
+#define DOWNLOAD_LINE_SIZE 100
+static void
+monitor_load (arg)
+    char	*arg;
+{
+  FILE *download;
+  char buf[DOWNLOAD_LINE_SIZE];
+  int i, bytes_read;
+
+  if (kiodebug)
+    printf ("Loading %s to monitor\n", arg);
+
+  download = fopen (arg, "r");
+  if (download == NULL)
+    {
+    error (sprintf (buf, "%s Does not exist", arg));
+    return;
+  }
+
+  printf_monitor (LOAD_CMD);
+/*  expect ("Waiting for S-records from host... ", 1); */
+
+  while (!feof (download))
+    {
+      bytes_read = fread (buf, sizeof (char), DOWNLOAD_LINE_SIZE, download);
+      if (hashmark)
+	{
+	  putchar ('.');
+	  fflush (stdout);
+	}
+
+      if (SERIAL_WRITE(monitor_desc, buf, bytes_read)) {
+	fprintf(stderr, "SERIAL_WRITE failed: (while downloading) %s\n", safe_strerror(errno));
+	break;
+      }
+      i = 0;
+      while (i++ <=200000) {} ;     			/* Ugly HACK, probably needs flow control */
+      if (bytes_read < DOWNLOAD_LINE_SIZE)
+	{
+	  if (!feof (download))
+	    error ("Only read %d bytes\n", bytes_read);
+	  break;
+	}
+    }
+
+  if (hashmark)
+    {
+      putchar ('\n');
+    }
+  if (!feof (download))
+    error ("Never got EOF while downloading");
+  fclose (download);
+}
+
+/* Put a command string, in args, out to MONITOR.  Output from MONITOR is placed
+   on the users terminal until the prompt is seen. */
+
+static void
+monitor_command (args, fromtty)
+     char	*args;
+     int	fromtty;
+{
+#ifdef LOG_FILE
+  fprintf (log_file, "\nIn command (args=%s)\n", args);
+#endif
+  if (monitor_desc == NULL)
+    error("monitor target not open.");
+  
+  if (!args)
+    error("Missing command.");
+	
+  printf_monitor("%s\r", args);
+  expect_prompt(0);
+}
+
+#if 0
+
+/* Connect the user directly to MONITOR.  This command acts just like the
+   'cu' or 'tip' command.  Use <CR>~. or <CR>~^D to break out.  */
+
+static struct ttystate ttystate;
+
+static void
+cleanup_tty()
+{  printf("\r\n[Exiting connect mode]\r\n");
+  /*SERIAL_RESTORE(0, &ttystate);*/
+}
+
+static void
+connect_command (args, fromtty)
+     char	*args;
+     int	fromtty;
+{
+  fd_set readfds;
+  int numfds;
+  int c;
+  char cur_esc = 0;
+
+  dont_repeat();
+
+  if (monitor_desc == NULL)
+    error("monitor target not open.");
+  
+  if (args)
+    fprintf("This command takes no args.  They have been ignored.\n");
+	
+  printf("[Entering connect mode.  Use ~. or ~^D to escape]\n");
+
+  serial_raw(0, &ttystate);
+
+  make_cleanup(cleanup_tty, 0);
+
+  FD_ZERO(&readfds);
+
+  while (1)
+    {
+      do
+	{
+	  FD_SET(0, &readfds);
+	  FD_SET(monitor_desc, &readfds);
+	  numfds = select(sizeof(readfds)*8, &readfds, 0, 0, 0);
+	}
+      while (numfds == 0);
+
+      if (numfds < 0)
+	perror_with_name("select");
+
+      if (FD_ISSET(0, &readfds))
+	{			/* tty input, send to monitor */
+	  c = getchar();
+	  if (c < 0)
+	    perror_with_name("connect");
+
+	  printf_monitor("%c", c);
+	  switch (cur_esc)
+	    {
+	    case 0:
+	      if (c == '\r')
+		cur_esc = c;
+	      break;
+	    case '\r':
+	      if (c == '~')
+		cur_esc = c;
+	      else
+		cur_esc = 0;
+	      break;
+	    case '~':
+	      if (c == '.' || c == '\004')
+		return;
+	      else
+		cur_esc = 0;
+	    }
+	}
+
+      if (FD_ISSET(monitor_desc, &readfds))
+	{
+	  while (1)
+	    {
+	      c = readchar(0);
+	      if (c < 0)
+		break;
+	      putchar(c);
+	    }
+	  fflush(stdout);
+	}
+    }
+}
+#endif
+
+/*
+ * Define the monitor command strings. Since these are passed directly
+ * through to a printf style function, we need can include formatting
+ * strings. We also need a CR or LF on the end.
+ */
+struct monitor_ops rom68k_cmds = {
+  "go \r",				/* execute or usually GO command */
+  "go \r",				/* continue command */
+  "st \r",				/* single step */
+  "db %x\r",				/* set a breakpoint */
+  "cb %x\r",				/* clear a breakpoint */
+  "pm %x\r",				/* set memory to a value */
+  "pm %x\r",				/* display memory */
+  "-%08X  ",				/* prompt memory commands use */
+  "pr %s %x\r",				/* set a register */
+  ":  ",				/* delimiter between registers */
+  "pr %s\r",				/* read a register */
+  "dc \r",				/* download command */
+  "ROM68K :->",				/* monitor command prompt */
+  "=",					/* end-of-command delimitor */
+  ".\r"					/* optional command terminator */
+};
+
+struct monitor_ops bug_cmds = {
+  "go \r",				/* execute or usually GO command */
+  "go \r",				/* continue command */
+  "gn \r",				/* single step */
+  "br %x\r",				/* set a breakpoint */
+  "nobr %x\r",				/* clear a breakpoint */
+  "mm %x\r",				/* set memory to a value */
+  "mm %x\r",				/* display memory */
+  "%08X",				/* prompt memory commands use */
+  "rs %s %x\r",				/* set a register */
+  "=",					/* delimiter between registers */
+  "rm %s\r",				/* read a register */
+  "lo 0\r",				/* download command */
+  "Bug>",				/* monitor command prompt */
+  "? ",					/* end-of-command delimitor */
+  ".\r"					/* optional command terminator */
+};
+
+/* Define the target subroutine names */
+struct monitor_ops mon68_cmds = {
+  "",				/* execute or usually GO command */
+  "",				/* continue command */
+  "",				/* single step */
+  "",				/* set a breakpoint */
+  "",				/* clear a breakpoint */
+  "",				/* set memory to a value */
+  "",				/* display memory */
+  "",				/* set a register */
+  "",				/* delimiter between registers */	
+  "",				/* read a register */
+  "",				/* download command */
+  ">",				/* monitor command prompt */
+  "",					/* end-of-command delimitor */
+  ""					/* optional command terminator */
+};
+
+struct target_ops rom68k_ops = {
+  "rom68k",
+  "Integrated System's ROM68K remote debug monitor",
+  "Use a remote computer running the ROM68K debug monitor.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).",
+  rom68k_open,
+  monitor_close, 
+  0,
+  monitor_detach,
+  monitor_resume,
+  monitor_wait,
+  monitor_fetch_register,
+  monitor_store_register,
+  monitor_prepare_to_store,
+  monitor_xfer_inferior_memory,
+  monitor_files_info,
+  monitor_insert_breakpoint,
+  monitor_remove_breakpoint,	/* Breakpoints */
+  0,
+  0,
+  0,
+  0,
+  0,				/* Terminal handling */
+  monitor_kill,
+  monitor_load,			/* load */
+  0,				/* lookup_symbol */
+  monitor_create_inferior,
+  monitor_mourn_inferior,
+  0,				/* can_run */
+  0, 				/* notice_signals */
+  process_stratum,
+  0,				/* next */
+  1,
+  1,
+  1,
+  1,
+  1,				/* all mem, mem, stack, regs, exec */
+  0,
+  0,				/* Section pointers */
+  OPS_MAGIC,			/* Always the last thing */
+};
+
+struct target_ops monitor_bug_ops = {
+  "bug",
+  "Motorola's BUG remote serial debug monitor",
+  "Use a remote computer running Motorola's BUG debug monitor.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).",
+  bug_open,
+  monitor_close, 
+  0,
+  monitor_detach,
+  monitor_resume,
+  monitor_wait,
+  monitor_fetch_register,
+  monitor_store_register,
+  monitor_prepare_to_store,
+  monitor_xfer_inferior_memory,
+  monitor_files_info,
+  monitor_insert_breakpoint,
+  monitor_remove_breakpoint,	/* Breakpoints */
+  0,
+  0,
+  0,
+  0,
+  0,				/* Terminal handling */
+  monitor_kill,
+  monitor_load,			/* load */
+  0,				/* lookup_symbol */
+  monitor_create_inferior,
+  monitor_mourn_inferior,
+  0,				/* can_run */
+  0, 				/* notice_signals */
+  process_stratum,
+  0,				/* next */
+  1,
+  1,
+  1,
+  1,
+  1,				/* all mem, mem, stack, regs, exec */
+  0,
+  0,				/* Section pointers */
+  OPS_MAGIC,			/* Always the last thing */
+};
+
+struct target_ops mon68_ops = {
+  "mon68",
+  "Intermetric's MON68 remote serial debug monitor",
+  "Use a remote computer running the MON68 debug monitor.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).",
+  mon68_open,
+  monitor_close, 
+  0,
+  monitor_detach,
+  monitor_resume,
+  monitor_wait,
+  monitor_fetch_register,
+  monitor_store_register,
+  monitor_prepare_to_store,
+  monitor_xfer_inferior_memory,
+  monitor_files_info,
+  monitor_insert_breakpoint,
+  monitor_remove_breakpoint,	/* Breakpoints */
+  0,
+  0,
+  0,
+  0,
+  0,				/* Terminal handling */
+  monitor_kill,
+  monitor_load,			/* load */
+  0,				/* lookup_symbol */
+  monitor_create_inferior,
+  monitor_mourn_inferior,
+  0,				/* can_run */
+  0, 				/* notice_signals */
+  process_stratum,
+  0,				/* next */
+  1,
+  1,
+  1,
+  1,
+  1,				/* all mem, mem, stack, regs, exec */
+  0,
+  0,				/* Section pointers */
+  OPS_MAGIC,			/* Always the last thing */
+};
+
+void
+_initialize_remote_monitors ()
+{
+  add_show_from_set (
+                     add_set_cmd ("remotedebug", no_class, var_boolean,
+                                  (char *)&kiodebug,
+                                  "Set debugging of I/O to a serial based Monitor.\n\
+When enabled, debugging info is displayed.",
+                                  &setlist),
+		     &showlist);
+  add_show_from_set (
+                     add_set_cmd ("hash", no_class, var_boolean,
+                                  (char *)&hashmark,
+				  "Set display of activity while downloading a file.\n\
+When enabled, a period \'.\' is displayed.",
+                                  &setlist),
+		     &showlist);
+
+  /* generic monitor command */
+  add_com ("monitor <command>", class_obscure, monitor_command,
+	   "Send a command to the debug monitor."); 
+#if 0
+  add_com ("connect", class_obscure, connect_command,
+	   "Connect the terminal directly up to a serial based command monitor.\n\
+Use <CR>~. or <CR>~^D to break out.");
+#endif
+
+  add_target (&rom68k_ops);
+/*  add_target (&mon68_ops); */
+  add_target (&monitor_bug_ops);
+}