* Makefile.in (remote-rdi.o): Remove.

	(rdi-share/libangsd.a): Likewise.
	* README: Don't mention remote-rdi.c.
	* NEWS: Mention removal of rdi-share.
	* configure.ac: Don't configure rdi-share subdirectory.
	* remote-rdi.c: Remove.
	* config/arm/embed.mt (TDEPFILES): Remove remote-rdi.o.
	(TDEPLIBS): Remove rdi-share/libangsd.a.
	* rdi-share/Makefile.am: Remove.
	* rdi-share/Makefile.in: Likewise.
	* rdi-share/README.CYGNUS: Likewise.
	* rdi-share/aclocal.m4: Likewise.
	* rdi-share/adp.h: Likewise.
	* rdi-share/adperr.h: Likewise.
	* rdi-share/angel.h: Likewise.
	* rdi-share/angel_bytesex.c: Likewise.
	* rdi-share/angel_bytesex.h: Likewise.
	* rdi-share/angel_endian.h: Likewise.
	* rdi-share/ardi.c: Likewise.
	* rdi-share/ardi.h: Likewise.
	* rdi-share/armdbg.h: Likewise.
	* rdi-share/buffers.h: Likewise.
	* rdi-share/chandefs.h: Likewise.
	* rdi-share/channels.h: Likewise.
	* rdi-share/chanpriv.h: Likewise.
	* rdi-share/configure: Likewise.
	* rdi-share/configure.in: Likewise.
	* rdi-share/crc.c: Likewise.
	* rdi-share/crc.h: Likewise.
	* rdi-share/dbg_conf.h: Likewise.
	* rdi-share/dbg_cp.h: Likewise.
	* rdi-share/dbg_hif.h: Likewise.
	* rdi-share/dbg_rdi.h: Likewise.
	* rdi-share/devclnt.h: Likewise.
	* rdi-share/devices.h: Likewise.
	* rdi-share/devsw.c: Likewise.
	* rdi-share/devsw.h: Likewise.
	* rdi-share/drivers.c: Likewise.
	* rdi-share/drivers.h: Likewise.
	* rdi-share/etherdrv.c: Likewise.
	* rdi-share/ethernet.h: Likewise.
	* rdi-share/host.h: Likewise.
	* rdi-share/hostchan.c: Likewise.
	* rdi-share/hostchan.h: Likewise.
	* rdi-share/hsys.c: Likewise.
	* rdi-share/hsys.h: Likewise.
	* rdi-share/logging.c: Likewise.
	* rdi-share/logging.h: Likewise.
	* rdi-share/msgbuild.c: Likewise.
	* rdi-share/msgbuild.h: Likewise.
	* rdi-share/params.c: Likewise.
	* rdi-share/params.h: Likewise.
	* rdi-share/rx.c: Likewise.
	* rdi-share/rxtx.h: Likewise.
	* rdi-share/serdrv.c: Likewise.
	* rdi-share/serpardr.c: Likewise.
	* rdi-share/sys.h: Likewise.
	* rdi-share/tx.c: Likewise.
	* rdi-share/unixcomm.c: Likewise.
	* rdi-share/unixcomm.h: Likewise.

1 files changed, 0 insertions, 212 deletions

diff --git a/gdb/rdi-share/unixcomm.h b/gdb/rdi-share/unixcomm.h
deleted file mode 100644
index baa6552..0000000
--- a/gdb/rdi-share/unixcomm.h
+++ /dev/null
@@ -1,212 +0,0 @@
-/* 
- * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
- * 
- * This software may be freely used, copied, modified, and distributed
- * provided that the above copyright notice is preserved in all copies of the
- * software.
- */
-
-/* -*-C-*-
- *
- * $Revision$
- *     $Date$
- *
- */
-#ifndef angsd_unixcomm_h
-#define angsd_unixcomm_h
-
-#include <errno.h>
-
-#if defined(BSD)
-#  define ERRNO_FOR_BLOCKED_IO EWOULDBLOCK
-#else
-#  define ERRNO_FOR_BLOCKED_IO EAGAIN
-#endif
-
-/*
- *  Function: Unix_MatchValidSerialDevice
- *   Purpose: check that the serial driver/port name is valid
- *            and return the actual device name if it is.
- *
- *    Params:
- *       Input: name    Name of device going to be used
- *
- *   Returns: 
- *          OK: Pointer to name of the device matched
- *       Error or unrecognised deivce: 0
- */
-extern const char *Unix_MatchValidSerialDevice(const char *name);
-
-/*
- *  Function: Unix_IsSerialInUse
- *   Purpose: check whether the serial port is in use
- *
- *    Params:
- *       Input: Nothing
- *
- *   Returns: 
- *          OK: 0       Serial device not in use
- *       Error: -1      Serial device in use
- */
-extern int Unix_IsSerialInUse(void);
-
-/*
- *  Function: Unix_OpenSerial
- *   Purpose: open the serial port
- *
- *    Params:
- *       Input: name    Name of device to open
- *
- *   Returns: Unix 'open' returns
- */
-extern int Unix_OpenSerial(const char *name);
-
-/*
- *  Function: Unix_CloseSerial
- *   Purpose: close the serial port
- *
- *    Params:
- *       Input: Nothing
- *
- *   Returns: Nothing
- */
-extern void Unix_CloseSerial(void);
-
-/*
- *  Function: Unix_ReadSerial
- *   Purpose: reads a specified number of bytes (or less) from the serial port
- *
- *    Params:
- *       Input: buf     Buffer to store read bytes
- *              n       Maximum number of bytes to read
- *
- *   Returns: Unix 'read' returns
- */
-extern int Unix_ReadSerial(unsigned char *buf, int n, bool block);
-
-/*
- *  Function: Unix_WriteSerial
- *   Purpose: writes a specified number of bytes (or less) to the serial port
- *
- *    Params:
- *       Input: buf     Buffer to write bytes from
- *              n       Maximum number of bytes to write
- *
- *   Returns: Unix 'write' returns
- */
-extern int Unix_WriteSerial(unsigned char *buf, int n);
-
-/*
- *  Function: Unix_ResetSerial
- *   Purpose: resets the serial port for another operation
- *
- *    Params:
- *       Input: Nothing
- *
- *   Returns: Nothing
- */
-extern void Unix_ResetSerial(void);
-
-/*
- *  Function: Unix_SetSerialBaudRate
- *   Purpose: check that the serial driver/port name is valid
- *
- *    Params:
- *       Input: baudrate    termios value for baud rate
- *
- *   Returns: Nothing
- */
-extern void Unix_SetSerialBaudRate(int baudrate);
-
-/*
- *  Function: Unix_ioctlNonBlocking
- *   Purpose: sets the serial port to non-blocking IO
- *
- *    Params:
- *       Input: Nothing
- *
- *   Returns: Nothing
- */
-extern void Unix_ioctlNonBlocking(void);
-
-/*
- *  Function: Unix_IsValidParallelDevice
- *   Purpose: check whether the combined serial and parallel device specification
- *            is ok, and return the ports selected
- *
- *    Params:
- *       Input: portstring - is a string which specifies which serial
- *                           and parallel ports are to be used. Can
- *                           include s=<val> and p=<val> separated by a
- *                           comma.
- *
- *   Returns: 
- *       Output: *sername  - returns the device name of the chosen serial port
- *               *parname  - returns the device name of the chosen parallel port
- *               If either of these is NULL on return then the match failed.
- */
-extern void Unix_IsValidParallelDevice(
-  const char *portstring, char **sername, char **parname
-);
-
-/*
- *  Function: Unix_IsParallelInUse
- *   Purpose: check whether the parallel port is in use
- *
- *    Params:
- *       Input: Nothing
- *
- *   Returns: 
- *          OK: 0       Parallel device not in use
- *       Error: -1      Parallel device in use
- */
-extern int Unix_IsParallelInUse(void);
-
-/*
- *  Function: Unix_OpenParallel
- *   Purpose: open the parallel port
- *
- *    Params:
- *       Input: name    Name of device to open
- *
- *   Returns: Unix 'open' returns
- */
-extern int Unix_OpenParallel(const char *name);
-
-/*
- *  Function: Unix_CloseParallel
- *   Purpose: close the parallel port
- *
- *    Params:
- *       Input: Nothing
- *
- *   Returns: Nothing
- */
-extern void Unix_CloseParallel(void);
-
-/*
- *  Function: Unix_WriteParallel
- *   Purpose: writes a specified number of bytes (or less) to the parallel port
- *
- *    Params:
- *       Input: buf     Buffer to write bytes from
- *              n       Maximum number of bytes to write
- *
- *   Returns: Unix 'write' returns
- */
-extern unsigned int Unix_WriteParallel(unsigned char *buf, int n);
-
-/*
- *  Function: Unix_ResetParallel
- *   Purpose: resets the parallel port for another operation
- *
- *    Params:
- *       Input: Nothing
- *
- *   Returns: Nothing
- */
-extern void Unix_ResetParallel(void);
-
-#endif /* ndef angsd_unixcomm_h */
-
-/* EOF unixcomm.h */