Initial creation of sourceware repository

1 files changed, 0 insertions, 319 deletions

diff --git a/gdb/rdi-share/sys.h b/gdb/rdi-share/sys.h
deleted file mode 100644
index b68ac78..0000000
--- a/gdb/rdi-share/sys.h
+++ /dev/null
@@ -1,319 +0,0 @@
-/* 
- * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
- * 
- * This software may be freely used, copied, modified, and distributed
- * provided that the above copyright notice is preserved in all copies of the
- * software.
- */
-
-/* sys.h 
- ***********************************************************************
- * Angel C Libary support channel protocol definitions
- *
- * $Revision$
- *     $Date$
- *
- *
- *
- *
- * MESSAGE FORMAT
- * --------------
- * Format of the "data" section of C Lib Support Channel Messages.
- * You will notice that the format is much the same as the format
- * of ADP messages - this is so that multi-threaded C Libraries can
- * be supported.
- *
- *  unsigned32 reason     - Main C Library reason code.
- *  unsigned32 debugID    - Info. describing host debug world;
- *                          private to host and used in any target
- *                          initiated messages.
- *  unsigned32 OSinfo1    \ Target OS information to identify process/thread
- *  unsigned32 OSinfo2    / world, etc. These two fields are target defined.
- *  byte       args[n]    - Data for message "reason" code.
- *
- * The "debugID" is defined by the host-end of the protocol, and is used
- * by the host to ensure that messages are routed to the correct handler
- * program/veneer (eg. imagine several threads having opened stdout and
- * each writing to a different window in a windowed debugger).
- *
- * NOTE: The reason that there is no "size" information, is that the
- * message IDs themselves encode the format of any arguments.
- *
- * For further discussion of the format see adp.h
- *
- * N.B. All streams are little endian.
- *
- * CLIB REASON CODE
- * ----------------
- * The message reason codes contain some information that ties them to
- * the channel and direction that the message will be used with. This
- * will ensure that even if the message "#define name" is not
- * completely descriptive, the message reason code is.
- *
- *      b31    = direction. 0=Host-to-Target; 1=Target-to-Host;
- *      b30-16 = reserved. should be zero
- *      b15-0  = message reason code.
- *
- * Note that typically a request will be initiated by the target side, and
- * that the host will then respond with either an acknowledgement or some
- * data.  In either case the same reason code will be used, but the direction
- * bit will be reveresed.
- */
-
-#ifndef __sys_h
-#define __sys_h
-
-#ifndef HtoT
-#define HtoT    ((unsigned)0 << 31)     /* Host-to-Target message */
-#define TtoH    ((unsigned)1 << 31)     /* Target-to-Host message */
-#endif
-
-/*
- * The following are error codes used in the status field returned on
- * sending a message. 0 represents no error having occurred, non-zero
- * represents a general error.  More codes should be added as required.
- */
- 
-#ifndef ErrCode
-#define NoError  0x0
-#endif
-
-/*************************************************************************/
-/* The following are direct conversions of the DeMon SWI's               */
-/* NB: nbytes is the number of bytes INCLUDING THE NULL character where  */
-/*     applicable.                                                       */
-
-/* This message is used as a  response to a packet whose message
- * was not understood.  The return parameter, code is the reason
- * code which was not understood. Although intended for use as a
- * default case on a received message switch it can also be used
- * as a  proper message*/
-#define CL_Unrecognised          0x00
-    /* Unrecognised()
-     * return(word code)
-     */
-
-/* Write a character to the terminal.
- */
-#define CL_WriteC       0x01
-   /* WriteC(byte data)
-    * return(word status)
-    */
-
-/* Write a NULL terminated string of characters to the terminal.  The length
- * of the string excluding the NULL terminating character is passed in 
- * 'nbytes'.
- */
-#define CL_Write0       0x02
-   /* Write0(word nbytes, bytes data)
-    * return(word status)
-    */
-
-/* Read a character from the terminal - probably the keyboard.
- */
-#define CL_ReadC        0x04
-   /* ReadC(void)
-    * return(word status, byte data)
-    */
-
-/* Perform system call, pass NULL terminated string to host's command
- * line interpreter(NOT AVAILABLE IN PC/DOS RELEASE).  The data byte
- * returned holds the return code from the system call.
- */ 
-#define CL_System       0x05
-   /* CLI(word nbytes, bytes data)
-    * return(word status, word data)
-    */
-
-/* It returns the address of the null terminated command line string used to
- * invoke the program. status will be set to NoError if the command line
- * can be returned. Other status values will be treated as error conditions.
- */
-#define CL_GetCmdLine   0x10
-   /* GetCmdLine(void)
-    * return(word status, word nbytes, bytes argline)
-    */
-
-/* Return the number of centi-seconds since the support code began 
- * execution.  Only the difference between successive calls can be
- * meaningful.
- */
-#define CL_Clock        0x61
-   /* Clock(void)
-    * return(word status, word clks)
-    */
-
-/* Return the number of seconds since the beginning of 1970.
- */
-#define CL_Time         0x63
-   /* Time(void)
-    * return(word status, word time)
-    */
-
-/* Delete(remove, un-link, wipe, destroy) the file named by the
- * NULL-terminated string 'name'.
- */
-#define CL_Remove       0x64
-   /* Remove(word nbytes, bytes name)
-    * return(word status)
-    */
-
-/* Rename the file specified by the NULL-terminated string 'oname'
- * to 'nname'.
- */   
-#define CL_Rename       0x65
-   /* Rename(word nbytes, bytes oname, word nbytes, bytes nname)
-    * return(word status)
-    */
-
-/* 'name' specifies a NULL-terminated string containing a file name or a
- * device name.  Opens the file/device and returns a non-zero handle on
- * success that can be quoted to CL_Close, CL_Read, CL_Write, CL_Seek,
- * CL_Flen or CL_IsTTY.  The mode is an integer in the range 0-11:-
- *
- * Mode:              0   1   2   3   4   5   6   7   8   9   10   11
- * ANSI C fopen mode: r   rb  r+  r+b w   wb  w+  w+b a   ab  a+   a+b
- *
- * Values 12-15 are illegal.  If 'name' is ":tt" the stdin/stdout is
- * opened depending on whether 'mode' is read or write.
- */ 
-#define CL_Open         0x66
-   /* Open(word nbytes, bytes name, word mode)
-    * return(word handle)
-    */
-
-/* 'handle' is a file handle previously returned by CL_Open.  CL_Close
- * closes the file.
- */ 
-#define CL_Close        0x68
-   /* Close(word handle)
-    * return(word status)
-    */
-
-/* Writes data of length nbytes to the file/device specified by
- * handle.  nbtotal represents the total number of bytes to be
- * written, whereas nbytes is the number of bytes in this packet
- *
- * If nbtotal is <= DATASIZE - CL_Write message header size in the
- * packet then nbytes = nbtotal and the number of bytes not written
- * is returned.  If nbtotal is > the packet size then the CL_Write
- * must be followed by a number of CL_WriteX's to complete the write,
- * the nbytes returned by CL_Write can be ignored
- * If the status word returned is non zero, an error has occurred and
- * the write request has been aborted.
- * 
- */
-#define CL_Write        0x69
-   /* Write(word handle, word nbtotal, word nbytes, bytes data)
-    * return(word status, word nbytes)
-    */
-
-/* Write Extension is a reads a continuation of data from a CL_Write 
- * which was too big to fit in a single packet.
- * nbytes is the number of bytes of data in this packet, the 
- * returned value of nbytes can be ignored except if it is the 
- * last packet, in which case it is the number of bytes that were NOT
- * written 
- */
-#define CL_WriteX       0x6A
-   /* WriteX(word nbytes, bytes data)
-    * return(word status, word nbytes)
-    */
-
-/* Reads 'nbytes' from the file/device specified by 'handle'.
- *
- * If nbytes <= DATASIZE then the read will occur in a single packet
- * and the returned value of nbytes will be the number of bytes actually
- * read and nbmore will be 0. If nbytes> DATASIZE then multiple packets
- * will have to be used ie CL_Read followed by 1 or more CL_ReadX
- * packets. In this case CL_Read will return nbytes read in the current
- * packet and nbmore representing how many more bytes are expected to be
- * read
- * If the status word is non zero then the request has completed with an
- * error. If the status word is 0xFFFFFFFF (-1) then an EOF condition
- * has been reached.
- */
-#define CL_Read         0x6B
-   /* Read(word handle, word nbytes)
-    * return(word status, word nbytes, word nbmore, bytes data)
-    */
-
-/* Read eXtension returns a continuation of the data that was opened for
- * read in the earlier CL_Read. The return value nbytes is the number of
- * data bytes in the packet, nbmore is the number of bytes more that are
- * expected to be read in subsequent packets.
- */
-#define CL_ReadX        0x6C
-  /* ReadX()
-   * return(word status, word nbytes, word nbmore, bytes data)
-   */
-
-/* Seeks to byte position 'posn' in the file/device specified by 'handle'.
- */
-#define CL_Seek         0x6D
-   /* Seek(word handle, word posn)
-    * return(word status)
-    */
-
-/* Returns the current length of the file specified by 'handle' in 'len'.
- * If an error occurs 'len' is set to -1. 
- */ 
-#define CL_Flen         0x6E
-   /* Flen(word handle)
-    * return(word len)
-    */
-
-/* Returns NoError if 'handle' specifies an interactive device, otherwise
- * returns GenError
- */ 
-#define CL_IsTTY        0x6F
-   /* IsTTY(word handle)
-    * return(word status)
-    */
-
-/* Returns a temporary host file name. The maximum length of a file name
- * is passed to the host. The TargetID is some identifier from the target
- * for this particular temporary filename. This value is could be used
- * directly in the generation of the filename. 
- *
- * If the host cannot create a suitable name or the generated name is too
- * long then status is non zero. status will be NoError if the host can create
- * a name. 
- */
-#define CL_TmpNam       0x70
-   /* TmpNam(word maxlength, word TargetID)
-    * return(word status, word nbytes, bytes fname)
-    */
-
-/* Note there is no message for Exit, EnterOS, InstallHandler or
- * GenerateError as these will be supported entirely at the host end,
- * or by the underlying Operating system.
- */
-
-#define CL_UnknownReason (-1)
-
-extern unsigned int GetRaiseHandler( void );
-extern unsigned int SysLibraryHandler(unsigned int sysCode, unsigned int *args);
-extern void angel_SysLibraryInit(void);
-
-/*
- * Function: Angel_IsSysHandlerRunning
- *  Purpose: return whether or not SysLibraryHandler is running
- *
- *   No paramaters
- *             
- *   Returns 1 if SysLibraryHandler is running
- *           0 otherwise
- */
-extern int Angel_IsSysHandlerRunning(void);
-
-#ifdef ICEMAN2
-/* This function exists in an ICEman2 system only, and can be called by
- * debug support code when the debugger tells it how much memory the
- * target has.  This will then be used to deal with the HEAPINFO SWI
- */
-extern void angel_SetTopMem(unsigned addr);
-#endif
-
-#endif
-