PR22576, ppc64_skip_trampoline_code uses wrong r2 for EXEC_REVERSE

The TOC pointer register, r2, on powerpc64 is generally not mentioned
in debug info.  It is saved and restored by call linkage code, and
set to the callee value either by call stub code (ELFv1) or in the
callee global entry point code (ELFv2).  A call stub uses the caller
TOC pointer to access the PLT.  So for gdb to read the correct PLT
entry in order to determine the destination of the trampoline, gdb
needs to know the caller r2.  When skipping over trampolines in the
normal forward direction, the caller r2 is simply the current value of
r2 (at the start of the trampoline).  However, when reversing over
trampolines the current value of r2 is that for the callee.  Using
that value results in wild reads of memory rather than the correct PLT
entry.

This patch corrects the value of r2 by using the value saved on the
stack for reverse execution.  Note that in reverse execution mode it
isn't really necessary for skip_trampoline_code to return the actual
destination, so we're doing a little more work than needed here.  Any
non-zero return value would do (and it would be nicer if the interface
was changed to return the start of the stub).

	PR tdep/22576
	* ppc64-tdep.c (ppc64_plt_entry_point): Rewrite to take TOC-relative
	PLT offset, and retrieve r2 from stack when executing in reverse.
	(ppc64_standard_linkage1_target): Drop pc param.  Calculate offset
	rather than PLT address.
	(ppc64_standard_linkage2_target): Likewise.
	(ppc64_standard_linkage3_target): Likewise.
	(ppc64_standard_linkage4_target): Likewise.
	(ppc64_skip_trampoline_code_1): Adjust to suit.

1 files changed, 43 insertions, 58 deletions

diff --git a/gdb/ppc64-tdep.c b/gdb/ppc64-tdep.c
index 563d253..0de4eed 100644
--- a/gdb/ppc64-tdep.c
+++ b/gdb/ppc64-tdep.c
@@ -49,15 +49,30 @@
    | (((spr) & 0x3e0) << 6)                     \
    | (((xo) & 0x3ff) << 1))
 
-/* If PLT is the address of a 64-bit PowerPC PLT entry,
-   return the function's entry point.  */
+/* PLT_OFF is the TOC-relative offset of a 64-bit PowerPC PLT entry.
+   Return the function's entry point.  */
 
 static CORE_ADDR
-ppc64_plt_entry_point (struct gdbarch *gdbarch, CORE_ADDR plt)
+ppc64_plt_entry_point (struct frame_info *frame, CORE_ADDR plt_off)
 {
+  struct gdbarch *gdbarch = get_frame_arch (frame);
   enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
+  struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+  CORE_ADDR tocp;
+
+  if (execution_direction == EXEC_REVERSE)
+    {
+      /* If executing in reverse, r2 will have been stored to the stack.  */
+      CORE_ADDR sp = get_frame_register_unsigned (frame,
+						  tdep->ppc_gp0_regnum + 1);
+      unsigned int sp_off = tdep->elf_abi == POWERPC_ELF_V1 ? 40 : 24;
+      tocp = read_memory_unsigned_integer (sp + sp_off, 8, byte_order);
+    }
+  else
+    tocp = get_frame_register_unsigned (frame, tdep->ppc_gp0_regnum + 2);
+
   /* The first word of the PLT entry is the function entry point.  */
-  return (CORE_ADDR) read_memory_unsigned_integer (plt, 8, byte_order);
+  return read_memory_unsigned_integer (tocp + plt_off, 8, byte_order);
 }
 
 /* Patterns for the standard linkage functions.  These are built by
@@ -377,74 +392,44 @@ static struct ppc_insn_pattern ppc64_standard_linkage8[] =
    the linkage function.  */
 
 /* If the current thread is about to execute a series of instructions
-   at PC matching the ppc64_standard_linkage pattern, and INSN is the result
+   matching the ppc64_standard_linkage pattern, and INSN is the result
    from that pattern match, return the code address to which the
    standard linkage function will send them.  (This doesn't deal with
    dynamic linker lazy symbol resolution stubs.)  */
 
 static CORE_ADDR
-ppc64_standard_linkage1_target (struct frame_info *frame,
-				CORE_ADDR pc, unsigned int *insn)
+ppc64_standard_linkage1_target (struct frame_info *frame, unsigned int *insn)
 {
-  struct gdbarch *gdbarch = get_frame_arch (frame);
-  struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
-
-  /* The address of the PLT entry this linkage function references.  */
-  CORE_ADDR plt
-    = ((CORE_ADDR) get_frame_register_unsigned (frame,
-						tdep->ppc_gp0_regnum + 2)
-       + (ppc_insn_d_field (insn[0]) << 16)
-       + ppc_insn_ds_field (insn[2]));
+  CORE_ADDR plt_off = ((ppc_insn_d_field (insn[0]) << 16)
+		       + ppc_insn_ds_field (insn[2]));
 
-  return ppc64_plt_entry_point (gdbarch, plt);
+  return ppc64_plt_entry_point (frame, plt_off);
 }
 
 static CORE_ADDR
-ppc64_standard_linkage2_target (struct frame_info *frame,
-				CORE_ADDR pc, unsigned int *insn)
+ppc64_standard_linkage2_target (struct frame_info *frame, unsigned int *insn)
 {
-  struct gdbarch *gdbarch = get_frame_arch (frame);
-  struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
-
-  /* The address of the PLT entry this linkage function references.  */
-  CORE_ADDR plt
-    = ((CORE_ADDR) get_frame_register_unsigned (frame,
-						tdep->ppc_gp0_regnum + 2)
-       + (ppc_insn_d_field (insn[1]) << 16)
-       + ppc_insn_ds_field (insn[3]));
+  CORE_ADDR plt_off = ((ppc_insn_d_field (insn[1]) << 16)
+		       + ppc_insn_ds_field (insn[3]));
 
-  return ppc64_plt_entry_point (gdbarch, plt);
+  return ppc64_plt_entry_point (frame, plt_off);
 }
 
 static CORE_ADDR
-ppc64_standard_linkage3_target (struct frame_info *frame,
-				CORE_ADDR pc, unsigned int *insn)
+ppc64_standard_linkage3_target (struct frame_info *frame, unsigned int *insn)
 {
-  struct gdbarch *gdbarch = get_frame_arch (frame);
-  struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
+  CORE_ADDR plt_off = ppc_insn_ds_field (insn[1]);
 
-  /* The address of the PLT entry this linkage function references.  */
-  CORE_ADDR plt
-    = ((CORE_ADDR) get_frame_register_unsigned (frame,
-						tdep->ppc_gp0_regnum + 2)
-       + ppc_insn_ds_field (insn[1]));
-
-  return ppc64_plt_entry_point (gdbarch, plt);
+  return ppc64_plt_entry_point (frame, plt_off);
 }
 
 static CORE_ADDR
-ppc64_standard_linkage4_target (struct frame_info *frame,
-				CORE_ADDR pc, unsigned int *insn)
+ppc64_standard_linkage4_target (struct frame_info *frame, unsigned int *insn)
 {
-  struct gdbarch *gdbarch = get_frame_arch (frame);
-  struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
-
-  CORE_ADDR plt
-    = ((CORE_ADDR) get_frame_register_unsigned (frame, tdep->ppc_gp0_regnum + 2)
-       + (ppc_insn_d_field (insn[1]) << 16)
-       + ppc_insn_ds_field (insn[2]));
+  CORE_ADDR plt_off = ((ppc_insn_d_field (insn[1]) << 16)
+		       + ppc_insn_ds_field (insn[2]));
 
-  return ppc64_plt_entry_point (gdbarch, plt);
+  return ppc64_plt_entry_point (frame, plt_off);
 }
 
 
@@ -480,39 +465,39 @@ ppc64_skip_trampoline_code_1 (struct frame_info *frame, CORE_ADDR pc)
     {
       if (i < ARRAY_SIZE (ppc64_standard_linkage8) - 1
 	  && ppc_insns_match_pattern (frame, pc, ppc64_standard_linkage8, insns))
-	pc = ppc64_standard_linkage4_target (frame, pc, insns);
+	pc = ppc64_standard_linkage4_target (frame, insns);
       else if (i < ARRAY_SIZE (ppc64_standard_linkage7) - 1
 	       && ppc_insns_match_pattern (frame, pc, ppc64_standard_linkage7,
 					   insns))
-	pc = ppc64_standard_linkage3_target (frame, pc, insns);
+	pc = ppc64_standard_linkage3_target (frame, insns);
       else if (i < ARRAY_SIZE (ppc64_standard_linkage6) - 1
 	       && ppc_insns_match_pattern (frame, pc, ppc64_standard_linkage6,
 					   insns))
-	pc = ppc64_standard_linkage4_target (frame, pc, insns);
+	pc = ppc64_standard_linkage4_target (frame, insns);
       else if (i < ARRAY_SIZE (ppc64_standard_linkage5) - 1
 	       && ppc_insns_match_pattern (frame, pc, ppc64_standard_linkage5,
 					   insns)
 	       && (insns[8] != 0 || insns[9] != 0))
-	pc = ppc64_standard_linkage3_target (frame, pc, insns);
+	pc = ppc64_standard_linkage3_target (frame, insns);
       else if (i < ARRAY_SIZE (ppc64_standard_linkage4) - 1
 	       && ppc_insns_match_pattern (frame, pc, ppc64_standard_linkage4,
 					   insns)
 	       && (insns[9] != 0 || insns[10] != 0))
-	pc = ppc64_standard_linkage4_target (frame, pc, insns);
+	pc = ppc64_standard_linkage4_target (frame, insns);
       else if (i < ARRAY_SIZE (ppc64_standard_linkage3) - 1
 	       && ppc_insns_match_pattern (frame, pc, ppc64_standard_linkage3,
 					   insns)
 	       && (insns[8] != 0 || insns[9] != 0))
-	pc = ppc64_standard_linkage3_target (frame, pc, insns);
+	pc = ppc64_standard_linkage3_target (frame, insns);
       else if (i < ARRAY_SIZE (ppc64_standard_linkage2) - 1
 	       && ppc_insns_match_pattern (frame, pc, ppc64_standard_linkage2,
 					   insns)
 	       && (insns[10] != 0 || insns[11] != 0))
-	pc = ppc64_standard_linkage2_target (frame, pc, insns);
+	pc = ppc64_standard_linkage2_target (frame, insns);
       else if (i < ARRAY_SIZE (ppc64_standard_linkage1) - 1
 	       && ppc_insns_match_pattern (frame, pc, ppc64_standard_linkage1,
 					   insns))
-	pc = ppc64_standard_linkage1_target (frame, pc, insns);
+	pc = ppc64_standard_linkage1_target (frame, insns);
       else
 	{
 	  /* Scan backward one more instructions if doesn't match.  */