Initial creation of sourceware repositorygdb-4_18-branchpoint

1 files changed, 142 insertions, 0 deletions

diff --git a/gdb/op50-rom.c b/gdb/op50-rom.c
new file mode 100644
index 0000000..3262091
--- /dev/null
+++ b/gdb/op50-rom.c
@@ -0,0 +1,142 @@
+/* Remote target glue for the Oki op50n based eval board.
+
+   Copyright 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "defs.h"
+#include "gdbcore.h"
+#include "target.h"
+#include "monitor.h"
+#include "serial.h"
+
+static void op50n_open PARAMS ((char *args, int from_tty));
+
+/*
+ * this array of registers need to match the indexes used by GDB. The
+ * whole reason this exists is cause the various ROM monitors use
+ * different strings than GDB does, and doesn't support all the
+ * registers either. So, typing "info reg sp" becomes a "r30".
+ */
+
+static char *op50n_regnames[NUM_REGS] =
+{
+  "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
+  "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
+  "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
+  "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",
+  "cr11", "p", NULL, NULL, NULL, "cr15", "cr19", "cr20",
+  "cr21", "cr22", NULL, NULL, NULL, NULL, NULL, NULL,
+  NULL, NULL, NULL, "cr0", "cr8", "cr9", "cr10","cr12",
+  "cr13", "cr24", "cr25", "cr26",
+};
+
+/*
+ * Define the monitor command strings. Since these are passed directly
+ * through to a printf style function, we need can include formatting
+ * strings. We also need a CR or LF on the end.
+ */
+
+static struct target_ops op50n_ops;
+
+static char *op50n_inits[] = {".\r", NULL};
+
+static struct monitor_ops op50n_cmds ;
+
+static void 
+init_op50n_cmds(void)
+{
+  op50n_cmds.flags =   MO_CLR_BREAK_USES_ADDR /*| MO_GETMEM_READ_SINGLE*/; /* flags */
+  op50n_cmds.init =   op50n_inits;			/* Init strings */
+  op50n_cmds.cont =   "g\r";			/* continue command */
+  op50n_cmds.step =   "t\r";			/* single step */
+  op50n_cmds.stop =   "\003.\r";			/* Interrupt char */
+  op50n_cmds.set_break =   "b %x\r";			/* set a breakpoint */
+  op50n_cmds.clr_break =   "b %x;0\r";			/* clear breakpoint at addr */
+  op50n_cmds.clr_all_break =   "bx\r";			/* clear all breakpoints */
+  op50n_cmds.fill =   "fx %x s%x %x\r";		/* memory fill cmd (addr, len, val) */
+  op50n_cmds.setmem.cmdb =     "sx %x %x\r";		/* setmem.cmdb (addr, value) */
+  op50n_cmds.setmem.cmdw =     "sh %x %x\r";		/* setmem.cmdw (addr, value) */
+  op50n_cmds.setmem.cmdl =     "s %x %x\r";		/* setmem.cmdl (addr, value) */
+  op50n_cmds.setmem.cmdll =     NULL;			/* setmem.cmdll (addr, value) */
+  op50n_cmds.setmem.resp_delim =     NULL;			/* setmem.resp_delim */
+  op50n_cmds.setmem.term =     NULL;			/* setmem.term */
+  op50n_cmds.setmem.term_cmd =     NULL;			/* setmem.term_cmd */
+#if 0
+  {
+    "sx %x\r",			/* getmem.cmdb (addr, len) */
+      "sh %x\r",			/* getmem.cmdw (addr, len) */
+      "s %x\r",			/* getmem.cmdl (addr, len) */
+      NULL,			/* getmem.cmdll (addr, len) */
+      " : ",			/* getmem.resp_delim */
+      " ",			/* getmem.term */
+      ".\r",			/* getmem.term_cmd */
+      } ;
+#else
+  op50n_cmds.getmem.cmdb =     "dx %x s%x\r";		/* getmem.cmdb (addr, len) */
+  op50n_cmds.getmem.cmdw =     NULL;			/* getmem.cmdw (addr, len) */
+  op50n_cmds.getmem.cmdl =     NULL;			/* getmem.cmdl (addr, len) */
+  op50n_cmds.getmem.cmdll =     NULL;			/* getmem.cmdll (addr, len) */
+  op50n_cmds.getmem.resp_delim =     " : ";			/* getmem.resp_delim */
+  op50n_cmds.getmem.term =     NULL;			/* getmem.term */
+  op50n_cmds.getmem.term_cmd =     NULL;			/* getmem.term_cmd */
+#endif
+  op50n_cmds.setreg.cmd =     "x %s %x\r";		/* setreg.cmd (name, value) */
+  op50n_cmds.setreg.resp_delim =     NULL;			/* setreg.resp_delim */
+  op50n_cmds.setreg.term =     NULL;			/* setreg.term */
+  op50n_cmds.setreg.term_cmd =     NULL;			/* setreg.term_cmd */
+  op50n_cmds.getreg.cmd =     "x %s\r";			/* getreg.cmd (name) */
+  op50n_cmds.getreg.resp_delim =     "=";			/* getreg.resp_delim */
+  op50n_cmds.getreg.term =     " ";			/* getreg.term */
+  op50n_cmds.getreg.term_cmd =     ".\r";			/* getreg.term_cmd */
+  op50n_cmds.dump_registers =   NULL;				/* dump_registers */
+  op50n_cmds.register_pattern =   NULL;				/* register_pattern */
+  op50n_cmds.supply_register =   NULL;				/* supply_register */
+  op50n_cmds.load_routine =   NULL;				/* load routine */
+  op50n_cmds.load =   "r 0\r";			/* download command */
+  op50n_cmds.loadresp =   NULL;				/* load response */
+  op50n_cmds.prompt =   "\n#";			/* monitor command prompt */
+  op50n_cmds.line_term =   "\r";				/* end-of-command delimitor */
+  op50n_cmds.cmd_end =   NULL;				/* optional command terminator */
+  op50n_cmds.target =   &op50n_ops;			/* target operations */
+  op50n_cmds.stopbits =   SERIAL_1_STOPBITS;		/* number of stop bits */
+  op50n_cmds.regnames =   op50n_regnames;		/* register names */
+  op50n_cmds.magic =   MONITOR_OPS_MAGIC;		/* magic */
+};
+
+static void
+op50n_open (args, from_tty)
+     char *args;
+     int from_tty;
+{
+  monitor_open (args, &op50n_cmds, from_tty);
+}
+
+void
+_initialize_op50n ()
+{
+  init_op50n_cmds() ;
+  init_monitor_ops (&op50n_ops);
+
+  op50n_ops.to_shortname = "op50n";
+  op50n_ops.to_longname = "Oki's debug monitor for the Op50n Eval board";
+  op50n_ops.to_doc = "Debug on a Oki OP50N eval board.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).";
+  op50n_ops.to_open = op50n_open;
+
+  add_target (&op50n_ops);
+}