Thu Aug 7 13:09:17 1997 Geoffrey Noer <noer@cygnus.com>

        Nomenclature change.  BDM is a specific type of OCD
        (On chip debugging).  Wiggler is the parallel port box controlled
        by Wigglers.dll.  The faster target box from Macraigor Systems
        is not a wiggler.
        * ocd.c:
        * ocd.h:
        * ppc-bdm.c:
	* ser-ocd.c:
        Replace all instances of "wiggler_" with "ocd_" and change most other
        instances of "wiggler" to "ocd" or "ocd device" depending on context.
        * config/m68k/monitor.mt: remove remote-wiggler.o from TDEPFILES
        until OCD with that target is supported again.

1 files changed, 72 insertions, 72 deletions

diff --git a/gdb/ocd.h b/gdb/ocd.h
index a8e0494..d0980a9 100644
--- a/gdb/ocd.h
+++ b/gdb/ocd.h
@@ -17,8 +17,8 @@ You should have received a copy of the GNU General Public License
 along with this program; if not, write to the Free Software
 Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
 
-#ifndef WIGGLER_H
-#define WIGGLER_H
+#ifndef OCD_H
+#define OCD_H
 
 /* Wiggler serial protocol definitions */
 
@@ -28,105 +28,105 @@ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
 
 /* Status flags */
 
-#define WIGGLER_FLAG_RESET 0x01 /* Target is being reset */
-#define WIGGLER_FLAG_STOPPED 0x02 /* Target is halted */
-#define WIGGLER_FLAG_BDM 0x04	/* Target is in BDM */
-#define WIGGLER_FLAG_PWF 0x08	/* Power failed */
-#define WIGGLER_FLAG_CABLE_DISC 0x10 /* BDM cable disconnected */
+#define OCD_FLAG_RESET 0x01	/* Target is being reset */
+#define OCD_FLAG_STOPPED 0x02	/* Target is halted */
+#define OCD_FLAG_BDM 0x04	/* Target is in BDM */
+#define OCD_FLAG_PWF 0x08	/* Power failed */
+#define OCD_FLAG_CABLE_DISC 0x10 /* BDM cable disconnected */
 
 /* Commands */
 
-#define WIGGLER_AYT 0x0		/* Are you there? */
-#define WIGGLER_GET_VERSION 0x1	/* Get Version */
-#define WIGGLER_SET_BAUD_RATE 0x2 /* Set Baud Rate */
-#define WIGGLER_INIT 0x10	/* Initialize Wiggler */
-#define WIGGLER_SET_SPEED 0x11	/* Set Speed */
-#define WIGGLER_GET_STATUS_MASK 0x12 /* Get Status Mask */
-#define WIGGLER_GET_CTRS 0x13	/* Get Error Counters */
-#define WIGGLER_SET_FUNC_CODE 0x14 /* Set Function Code */
-#define WIGGLER_SET_CTL_FLAGS 0x15 /* Set Control Flags */
-#define WIGGLER_SET_BUF_ADDR 0x16 /* Set Register Buffer Address */
-#define WIGGLER_RUN 0x20	/* Run Target from PC */
-#define WIGGLER_RUN_ADDR 0x21	/* Run Target from Specified Address */
-#define WIGGLER_STOP 0x22	/* Stop Target */
-#define WIGGLER_RESET_RUN 0x23	/* Reset Target and Run */
-#define WIGGLER_RESET 0x24	/* Reset Target and Halt */
-#define WIGGLER_STEP 0x25	/* Single step */
-#define WIGGLER_READ_REGS 0x30	/* Read Registers */
-#define WIGGLER_WRITE_REGS 0x31	/* Write Registers */
-#define WIGGLER_READ_MEM 0x32	/* Read Memory */
-#define WIGGLER_WRITE_MEM 0x33	/* Write Memory */
-#define WIGGLER_FILL_MEM 0x34	/* Fill Memory */
-#define WIGGLER_MOVE_MEM 0x35	/* Move Memory */
-
-#define WIGGLER_READ_INT_MEM 0x80 /* Read Internal Memory */
-#define WIGGLER_WRITE_INT_MEM 0x81 /* Write Internal Memory */
-#define WIGGLER_JUMP 0x82	/* Jump to Subroutine */
-
-#define WIGGLER_ERASE_FLASH 0x90 /* Erase flash memory */
-#define WIGGLER_PROGRAM_FLASH 0x91 /* Write flash memory */
-#define WIGGLER_EXIT_MON 0x93	/* Exit the flash programming monitor  */
-#define WIGGLER_ENTER_MON 0x94	/* Enter the flash programming monitor  */
-
-#define WIGGLER_SET_STATUS 0x0a	/* Set status */
-#define   WIGGLER_FLAG_STOP 0x0 /* Stop the target, enter BDM */
-#define   WIGGLER_FLAG_START 0x01 /* Start the target at PC */
-#define   WIGGLER_FLAG_RETURN_STATUS 0x04 /* Return async status */
-
-/* Target type (for WIGGLER_INIT command) */
-
-enum wiggler_target_type {
-  WIGGLER_TARGET_CPU32=0x0,	/* Moto cpu32 family */
-  WIGGLER_TARGET_CPU16=0x1,
-  WIGGLER_TARGET_MOTO_PPC=0x2,	/* Motorola PPC 5xx/8xx */
-  WIGGLER_TARGET_IBM_PPC=0x3};	/* IBM PPC 4xx */
-
-void wiggler_open PARAMS ((char *name, int from_tty, enum wiggler_target_type,
+#define OCD_AYT 0x0		/* Are you there? */
+#define OCD_GET_VERSION 0x1	/* Get Version */
+#define OCD_SET_BAUD_RATE 0x2	/* Set Baud Rate */
+#define OCD_INIT 0x10		/* Initialize Wiggler */
+#define OCD_SET_SPEED 0x11	/* Set Speed */
+#define OCD_GET_STATUS_MASK 0x12 /* Get Status Mask */
+#define OCD_GET_CTRS 0x13	/* Get Error Counters */
+#define OCD_SET_FUNC_CODE 0x14	/* Set Function Code */
+#define OCD_SET_CTL_FLAGS 0x15	/* Set Control Flags */
+#define OCD_SET_BUF_ADDR 0x16	/* Set Register Buffer Address */
+#define OCD_RUN 0x20		/* Run Target from PC */
+#define OCD_RUN_ADDR 0x21	/* Run Target from Specified Address */
+#define OCD_STOP 0x22		/* Stop Target */
+#define OCD_RESET_RUN 0x23	/* Reset Target and Run */
+#define OCD_RESET 0x24		/* Reset Target and Halt */
+#define OCD_STEP 0x25		/* Single step */
+#define OCD_READ_REGS 0x30	/* Read Registers */
+#define OCD_WRITE_REGS 0x31	/* Write Registers */
+#define OCD_READ_MEM 0x32	/* Read Memory */
+#define OCD_WRITE_MEM 0x33	/* Write Memory */
+#define OCD_FILL_MEM 0x34	/* Fill Memory */
+#define OCD_MOVE_MEM 0x35	/* Move Memory */
+
+#define OCD_READ_INT_MEM 0x80	/* Read Internal Memory */
+#define OCD_WRITE_INT_MEM 0x81	/* Write Internal Memory */
+#define OCD_JUMP 0x82		/* Jump to Subroutine */
+
+#define OCD_ERASE_FLASH 0x90	/* Erase flash memory */
+#define OCD_PROGRAM_FLASH 0x91	/* Write flash memory */
+#define OCD_EXIT_MON 0x93	/* Exit the flash programming monitor  */
+#define OCD_ENTER_MON 0x94	/* Enter the flash programming monitor  */
+
+#define OCD_SET_STATUS 0x0a	/* Set status */
+#define OCD_FLAG_STOP 0x0	/* Stop the target, enter BDM */
+#define OCD_FLAG_START 0x01	/* Start the target at PC */
+#define OCD_FLAG_RETURN_STATUS 0x04 /* Return async status */
+
+/* Target type (for OCD_INIT command) */
+
+enum ocd_target_type {
+  OCD_TARGET_CPU32=0x0,		/* Moto cpu32 family */
+  OCD_TARGET_CPU16=0x1,
+  OCD_TARGET_MOTO_PPC=0x2,	/* Motorola PPC 5xx/8xx */
+  OCD_TARGET_IBM_PPC=0x3};	/* IBM PPC 4xx */
+
+void ocd_open PARAMS ((char *name, int from_tty, enum ocd_target_type,
 			   struct target_ops *ops));
 
-void wiggler_close PARAMS ((int quitting));
+void ocd_close PARAMS ((int quitting));
 
-void wiggler_detach PARAMS ((char *args, int from_tty));
+void ocd_detach PARAMS ((char *args, int from_tty));
 
-void wiggler_resume PARAMS ((int pid, int step, enum target_signal siggnal));
+void ocd_resume PARAMS ((int pid, int step, enum target_signal siggnal));
 
-void wiggler_prepare_to_store PARAMS ((void));
+void ocd_prepare_to_store PARAMS ((void));
 
-void wiggler_stop PARAMS ((void));
+void ocd_stop PARAMS ((void));
 
-void wiggler_files_info PARAMS ((struct target_ops *ignore));
+void ocd_files_info PARAMS ((struct target_ops *ignore));
 
 
-int wiggler_xfer_memory PARAMS ((CORE_ADDR memaddr, char *myaddr,
+int ocd_xfer_memory PARAMS ((CORE_ADDR memaddr, char *myaddr,
 				 int len, int should_write,
 				 struct target_ops *target));
 
-void wiggler_mourn PARAMS ((void));
+void ocd_mourn PARAMS ((void));
 
-void wiggler_create_inferior PARAMS ((char *exec_file,
+void ocd_create_inferior PARAMS ((char *exec_file,
 				      char *args,
 				      char **env));
 
-int wiggler_thread_alive PARAMS ((int th));
+int ocd_thread_alive PARAMS ((int th));
 
-void wiggler_error PARAMS ((char *s, int error_code));
+void ocd_error PARAMS ((char *s, int error_code));
 
-void wiggler_kill PARAMS ((void));
+void ocd_kill PARAMS ((void));
 
-void wiggler_load PARAMS((char *args, int from_tty));
+void ocd_load PARAMS((char *args, int from_tty));
 
-unsigned char * wiggler_read_bdm_registers PARAMS ((int first_bdm_regno,
+unsigned char * ocd_read_bdm_registers PARAMS ((int first_bdm_regno,
 						    int last_bdm_regno,
 						    int *reglen));
 
-CORE_ADDR wiggler_read_bdm_register PARAMS ((int bdm_regno));
+CORE_ADDR ocd_read_bdm_register PARAMS ((int bdm_regno));
 
-void wiggler_write_bdm_registers PARAMS ((int first_bdm_regno,
+void ocd_write_bdm_registers PARAMS ((int first_bdm_regno,
 					  unsigned char *regptr,
 					  int reglen));
 
-void wiggler_write_bdm_register PARAMS ((int bdm_regno, CORE_ADDR reg));
+void ocd_write_bdm_register PARAMS ((int bdm_regno, CORE_ADDR reg));
 
-int wiggler_wait PARAMS ((void));
+int ocd_wait PARAMS ((void));
 
-#endif /* WIGGLER_H */
+#endif /* OCD_H */