Initial creation of sourceware repositorygdb-4_18-branchpoint

1 files changed, 158 insertions, 0 deletions

diff --git a/gdb/nindy-share/b.out.h b/gdb/nindy-share/b.out.h
new file mode 100644
index 0000000..a82c261
--- /dev/null
+++ b/gdb/nindy-share/b.out.h
@@ -0,0 +1,158 @@
+/*  Copyright 1992 Free Software Foundation, Inc.
+ *
+ * This file is a modified version of 'a.out.h'.  It is to be used in all
+ * all GNU tools modified to support the i80960 (or tools that operate on
+ * object files created by such tools).
+ *
+ * All i80960 development is done in a CROSS-DEVELOPMENT environment.  I.e.,
+ * object code is generated on, and executed under the direction of a symbolic
+ * debugger running on, a host system.  We do not want to be subject to the
+ * vagaries of which host it is or whether it supports COFF or a.out format,
+ * or anything else.  We DO want to:
+ *
+ *	o always generate the same format object files, regardless of host.
+ *
+ *	o have an 'a.out' header that we can modify for our own purposes
+ *	  (the 80960 is typically an embedded processor and may require
+ *	  enhanced linker support that the normal a.out.h header can't
+ *	  accommodate).
+ *
+ * As for byte-ordering, the following rules apply:
+ *
+ *	o Text and data that is actually downloaded to the target is always
+ *	  in i80960 (little-endian) order.
+ *
+ *	o All other numbers (in the header, symbols, relocation directives)
+ *	  are in host byte-order:  object files CANNOT be lifted from a
+ *	  little-end host and used on a big-endian (or vice versa) without
+ *	  modification.
+ *
+ *	o The downloader ('comm960') takes care to generate a pseudo-header
+ *	  with correct (i80960) byte-ordering before shipping text and data
+ *	  off to the NINDY monitor in the target systems.  Symbols and
+ *	  relocation info are never sent to the target.
+ */
+
+
+#define BMAGIC	0415
+/* We don't accept the following (see N_BADMAG macro).
+ * They're just here so GNU code will compile.
+ */
+#define	OMAGIC	0407		/* old impure format */
+#define	NMAGIC	0410		/* read-only text */
+#define	ZMAGIC	0413		/* demand load format */
+
+/* FILE HEADER
+ *	All 'lengths' are given as a number of bytes.
+ *	All 'alignments' are for relinkable files only;  an alignment of
+ *		'n' indicates the corresponding segment must begin at an
+ *		address that is a multiple of (2**n).
+ */
+struct exec {
+	/* Standard stuff */
+	unsigned long a_magic;	/* Identifies this as a b.out file	*/
+	unsigned long a_text;	/* Length of text			*/
+	unsigned long a_data;	/* Length of data			*/
+	unsigned long a_bss;	/* Length of runtime uninitialized data area */
+	unsigned long a_syms;	/* Length of symbol table		*/
+	unsigned long a_entry;	/* Runtime start address		*/
+	unsigned long a_trsize;	/* Length of text relocation info	*/
+	unsigned long a_drsize;	/* Length of data relocation info	*/
+
+	/* Added for i960 */
+	unsigned long a_tload;	/* Text runtime load address		*/
+	unsigned long a_dload;	/* Data runtime load address		*/
+	unsigned char a_talign;	/* Alignment of text segment		*/
+	unsigned char a_dalign;	/* Alignment of data segment		*/
+	unsigned char a_balign;	/* Alignment of bss segment		*/
+	unsigned char unused;	/* (Just to make struct size a multiple of 4) */
+};
+
+#define N_BADMAG(x)	(((x).a_magic)!=BMAGIC)
+#define N_TXTOFF(x)	( sizeof(struct exec) )
+#define N_DATOFF(x)	( N_TXTOFF(x) + (x).a_text )
+#define N_TROFF(x)	( N_DATOFF(x) + (x).a_data )
+#define N_DROFF(x)	( N_TROFF(x) + (x).a_trsize )
+#define N_SYMOFF(x)	( N_DROFF(x) + (x).a_drsize )
+#define N_STROFF(x)	( N_SYMOFF(x) + (x).a_syms )
+
+/* A single entry in the symbol table
+ */
+struct nlist {
+	union {
+		char	*n_name;
+		struct nlist *n_next;
+		long	n_strx;		/* Index into string table	*/
+	} n_un;
+	unsigned char n_type;	/* See below				*/
+	char	n_other;	/* Used in i80960 support -- see below	*/
+	short	n_desc;
+	unsigned long n_value;
+};
+
+
+/* Legal values of n_type
+ */
+#define N_UNDF	0	/* Undefined symbol	*/
+#define N_ABS	2	/* Absolute symbol	*/
+#define N_TEXT	4	/* Text symbol		*/
+#define N_DATA	6	/* Data symbol		*/
+#define N_BSS	8	/* BSS symbol		*/
+#define N_FN	31	/* Filename symbol	*/
+
+#define N_EXT	1	/* External symbol (OR'd in with one of above)	*/
+#define N_TYPE	036	/* Mask for all the type bits			*/
+#define N_STAB	0340	/* Mask for all bits used for SDB entries 	*/
+
+/* MEANING OF 'n_other'
+ *
+ * If non-zero, the 'n_other' fields indicates either a leaf procedure or
+ * a system procedure, as follows:
+ *
+ *	1 <= n_other <= 32 :
+ *		The symbol is the entry point to a system procedure.
+ *		'n_value' is the address of the entry, as for any other
+ *		procedure.  The system procedure number (which can be used in
+ *		a 'calls' instruction) is (n_other-1).  These entries come from
+ *		'.sysproc' directives.
+ *
+ *	n_other == N_CALLNAME
+ *		the symbol is the 'call' entry point to a leaf procedure.
+ *		The *next* symbol in the symbol table must be the corresponding
+ *		'bal' entry point to the procedure (see following).  These
+ *		entries come from '.leafproc' directives in which two different
+ *		symbols are specified (the first one is represented here).
+ *	
+ *
+ *	n_other == N_BALNAME
+ *		the symbol is the 'bal' entry point to a leaf procedure.
+ *		These entries result from '.leafproc' directives in which only
+ *		one symbol is specified, or in which the same symbol is
+ *		specified twice.
+ *
+ * Note that an N_CALLNAME entry *must* have a corresponding N_BALNAME entry,
+ * but not every N_BALNAME entry must have an N_CALLNAME entry.
+ */
+#define	N_CALLNAME	-1
+#define	N_BALNAME	-2
+
+
+struct relocation_info {
+	int	 r_address;	/* File address of item to be relocated	*/
+	unsigned
+		r_symbolnum:24,/* Index of symbol on which relocation is based*/
+		r_pcrel:1,	/* 1 => relocate PC-relative; else absolute
+				 *	On i960, pc-relative implies 24-bit
+				 *	address, absolute implies 32-bit.
+				 */
+		r_length:2,	/* Number of bytes to relocate:
+				 *	0 => 1 byte
+				 *	1 => 2 bytes
+				 *	2 => 4 bytes -- only value used for i960
+				 */
+		r_extern:1,
+		r_bsr:1,	/* Something for the GNU NS32K assembler */
+		r_disp:1,	/* Something for the GNU NS32K assembler */
+		r_callj:1,	/* 1 if relocation target is an i960 'callj' */
+		nuthin:1;	/* Unused				*/
+};