* monitor.h: Clean up comment formatting.

	(current_monitor): Remove decl.
	(LOADTYPES, LOADPROTOS, INIT_CMD, etc): Remove definitions.
	(push_monitor, SREC_SIZE): Remove.
	* monitor.c: Expand old macro into current_monitor derefs
	everywhere.
	* remote-os9k.c (current_monitor): Remove definition.

1 files changed, 85 insertions, 99 deletions

diff --git a/gdb/monitor.h b/gdb/monitor.h
index daad1ca..e61dc96 100644
--- a/gdb/monitor.h
+++ b/gdb/monitor.h
@@ -1,53 +1,55 @@
-/* Remote debugging interface ROM monitors.
- *  Copyright 1990, 1991, 1992, 1996 Free Software Foundation, Inc.
- *  Contributed by Cygnus Support. Written by Rob Savoye for Cygnus.
- *
- * This file is part of GDB.
- * 
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
+/* Definitions for remote debugging interface for ROM monitors.
+    Copyright 1990, 1991, 1992, 1996 Free Software Foundation, Inc.
+    Contributed by Cygnus Support. Written by Rob Savoye for Cygnus.
+  
+   This file is part of GDB.
+   
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+  
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+  
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+*/
 
 #include "serial.h"
 
 /* This structure describes the strings necessary to give small command
    sequences to the monitor, and parse the response.
 
-   CMD is the actual command typed at the monitor.  Usually this has embedded
-   sequences ala printf, which are substituted with the arguments appropriate
-   to that type of command.  Ie: to examine a register, we substitute the
-   register name for the first arg.  To modify memory, we substitute the memory
-   location and the new contents for the first and second args, etc...
+   CMD is the actual command typed at the monitor.  Usually this has
+   embedded sequences ala printf, which are substituted with the
+   arguments appropriate to that type of command.  Ie: to examine a
+   register, we substitute the register name for the first arg.  To
+   modify memory, we substitute the memory location and the new
+   contents for the first and second args, etc...
 
    RESP_DELIM used to home in on the response string, and is used to
-   disambiguate the answer within the pile of text returned by the monitor.
-   This should be a unique string that immediately precedes the answer.  Ie: if
-   your monitor prints out `PC:  00000001= ' in response to asking for the PC,
-   you should use `:  ' as the RESP_DELIM.  RESP_DELIM may be NULL if the res-
-   ponse is going to be ignored, or has no particular leading text.
-
-   TERM is the string that the monitor outputs to indicate that it is idle, and
-   waiting for input.  This is usually a prompt of some sort.  In the previous
-   example, it would be `= '.  It is important that TERM really means that the
-   monitor is idle, otherwise GDB may try to type at it when it isn't ready for
-   input.  This is a problem because many monitors cannot deal with type-ahead.
-   TERM may be NULL if the normal prompt is output.
-
-   TERM_CMD is used to quit out of the subcommand mode and get back to the main
-   prompt.  TERM_CMD may be NULL if it isn't necessary.  It will also be
-   ignored if TERM is NULL.
-*/
+   disambiguate the answer within the pile of text returned by the
+   monitor.  This should be a unique string that immediately precedes
+   the answer.  Ie: if your monitor prints out `PC: 00000001= ' in
+   response to asking for the PC, you should use `: ' as the
+   RESP_DELIM.  RESP_DELIM may be NULL if the res- ponse is going to
+   be ignored, or has no particular leading text.
+
+   TERM is the string that the monitor outputs to indicate that it is
+   idle, and waiting for input.  This is usually a prompt of some
+   sort.  In the previous example, it would be `= '.  It is important
+   that TERM really means that the monitor is idle, otherwise GDB may
+   try to type at it when it isn't ready for input.  This is a problem
+   because many monitors cannot deal with type-ahead.  TERM may be
+   NULL if the normal prompt is output.
+
+   TERM_CMD is used to quit out of the subcommand mode and get back to
+   the main prompt.  TERM_CMD may be NULL if it isn't necessary.  It
+   will also be ignored if TERM is NULL.  */
 
 struct memrw_cmd
 {
@@ -104,68 +106,52 @@ struct monitor_ops
   int magic;			/* Check value */
 };
 
+/* The monitor ops magic number, used to detect if an ops structure doesn't
+   have the right number of entries filled in. */
+
 #define MONITOR_OPS_MAGIC 600925
 
-/* Flag defintions */
-
-#define MO_CLR_BREAK_USES_ADDR 0x1	/* If set, then clear breakpoint command
-					   uses address, otherwise it uses an index
-					   returned by the monitor.  */
-#define MO_FILL_USES_ADDR 0x2		/* If set, then memory fill command uses
-					   STARTADDR, ENDADDR+1, VALUE as args, else it
-					   uses STARTADDR, LENGTH, VALUE as args. */
-#define MO_NEED_REGDUMP_AFTER_CONT 0x4	/* If set, then monitor doesn't auto-
-					   matically supply register dump when
-					   coming back after a continue.  */
-#define MO_GETMEM_NEEDS_RANGE 0x8	/* getmem needs start addr and end addr */
-#define MO_GETMEM_READ_SINGLE 0x10	/* getmem can only read one loc at a time */
-#define MO_HANDLE_NL 0x20		/* handle \r\n combinations */
-
-#define MO_NO_ECHO_ON_OPEN 0x40	/* don't expect echos in monitor_open */
-
-#define MO_SEND_BREAK_ON_STOP 0x80	/* If set, send break to stop monitor */
-
-extern struct monitor_ops        *current_monitor;
-
-#define LOADTYPES		(current_monitor->loadtypes)
-#define LOADPROTOS		(current_monitor->loadprotos)
-#define INIT_CMD 		(current_monitor->init)
-#define CONT_CMD		(current_monitor->cont)
-#define STEP_CMD		(current_monitor->step)
-#define SET_BREAK_CMD		(current_monitor->set_break)
-#define CLR_BREAK_CMD		(current_monitor->clr_break)
-#define SET_MEM			(current_monitor->setmem)
-#define GET_MEM			(current_monitor->getmem)
-#define LOAD_CMD		(current_monitor->load)
-#define GET_REG			(current_monitor->regget)
-#define SET_REG			(current_monitor->regset)
-#define CMD_END			(current_monitor->cmd_end)
-#define CMD_DELIM		(current_monitor->cmd_delim)
-#define PROMPT			(current_monitor->prompt)
-#define TARGET_OPS		(current_monitor->target)
-#define TARGET_NAME		(current_monitor->target->to_shortname)
-#define BAUDRATES		(current_monitor->baudrates)
-#define STOPBITS		(current_monitor->stopbits)
-#define REGNAMES(x)		(current_monitor->regnames[x])
-#define ROMCMD(x)		(x.cmd)
-#define ROMDELIM(x)		(x.delim)
-#define ROMRES(x)		(x.result)
-
-#define push_monitor(x)		current_monitor = x;
+/* Flag definitions. */
+
+/* If set, then clear breakpoint command uses address, otherwise it
+   uses an index returned by the monitor.  */
+
+#define MO_CLR_BREAK_USES_ADDR 0x1
+
+/* If set, then memory fill command uses STARTADDR, ENDADDR+1, VALUE
+   as args, else it uses STARTADDR, LENGTH, VALUE as args. */
+
+#define MO_FILL_USES_ADDR 0x2
+
+/* If set, then monitor doesn't automatically supply register dump
+   when coming back after a continue.  */
+
+#define MO_NEED_REGDUMP_AFTER_CONT 0x4
+
+/* getmem needs start addr and end addr */
+
+#define MO_GETMEM_NEEDS_RANGE 0x8
+
+/* getmem can only read one loc at a time */
+
+#define MO_GETMEM_READ_SINGLE 0x10
+
+/* handle \r\n combinations */
+
+#define MO_HANDLE_NL 0x20
+
+/* don't expect echos in monitor_open */
+
+#define MO_NO_ECHO_ON_OPEN 0x40
+
+/* If set, send break to stop monitor */
+
+#define MO_SEND_BREAK_ON_STOP 0x80
 
 #define SREC_SIZE 160
 
-/*
- * FIXME: These are to temporarily maintain compatability with the
- *	old monitor structure till remote-mon.c is fixed to work
- *	like the *-rom.c files.
- */
-#define MEM_PROMPT		(current_monitor->loadtypes)
-#define MEM_SET_CMD		(current_monitor->setmem)
-#define MEM_DIS_CMD		(current_monitor->getmem)
-#define REG_DELIM               (current_monitor->regset.delim)
-
-extern void monitor_open PARAMS ((char *args, struct monitor_ops *ops, int from_tty));
+extern void monitor_open PARAMS ((char *args, struct monitor_ops *ops,
+				  int from_tty));
 extern void monitor_close PARAMS ((int quitting));
 extern char *monitor_supply_register PARAMS ((int regno, char *valstr));
 extern int monitor_expect PARAMS ((char *prompt, char *buf, int buflen));