Make first and last lines of 'command help documentation' consistent.

With this patch, the help docs now respect 2 invariants:
  * The first line of a command help is terminated by a '.' character.
  * The last character of a command help is not a newline character.

Note that the changes for the last invariant were done by Tom, as part of :
 [PATCH] Remove trailing newlines from help text
 https://sourceware.org/ml/gdb-patches/2019-06/msg00050.html
but some occurrences have been re-introduced since then.

Some help docs had to be rephrased/restructured to respect the above
invariants.

Before this patch, print_doc_line was printing the first line
of a command help documentation, but stopping at the first '.'
or ',' character.

This was giving inconsistent results :
  * The first line of command helps was sometimes '.' terminated,
    sometimes not.
  * The first line of command helps was not always designed to be
    readable/understandable/unambiguous when stopping at the first
    '.' or ',' character.

This e.g. created the following inconsistencies/problems:
< catch exception -- Catch Ada exceptions
< catch handlers -- Catch Ada exceptions
< catch syscall -- Catch system calls by their names
< down-silently -- Same as the `down' command
while the new help is:
> catch exception -- Catch Ada exceptions, when raised.
> catch handlers -- Catch Ada exceptions, when handled.
> catch syscall -- Catch system calls by their names, groups and/or numbers.
> down-silently -- Same as the `down' command, but does not print anything.

Also, the command help doc should not be terminated by a newline
character, but this was not respected by all commands.
The cli-option -OPT framework re-introduced some occurences.
So, the -OPT build help framework was changed to not output newlines at the
end of %OPTIONS% replacement.

This patch changes the help documentations to ensure the 2 invariants
given above.

It implied to slightly rephrase or restructure some help docs.

Based on the above invariants, print_doc_line (called by
'apropos' and 'help' commands to print the first line of a command
help) now outputs the full first line of a command help.

This all results in a lot of small changes in the produced help docs.
There are less code changes than changes in the help docs, as a lot
of docs are produced by some code (e.g. the remote packet usage settings).

gdb/ChangeLog
2019-08-07  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

	* cli/cli-decode.h (print_doc_line): Add for_value_prefix argument.
	* cli/cli-decode.c (print_doc_line): Likewise.  It now prints
	the full first line, except when FOR_VALUE_PREFIX.  In this case,
	the trailing '.' is not output, and the first character is uppercased.
	(print_help_for_command): Update call to print_doc_line.
	(print_doc_of_command): Likewise.
	* cli/cli-setshow.c (deprecated_show_value_hack): Likewise.
	* cli/cli-option.c (append_indented_doc): Do not append newline.
	(build_help_option): Append newline after first appended_indented_doc
	only if a second call is done.
	(build_help): Append 2 new lines before each option, except the first
	one.
	* compile/compile.c (_initialize_compile): Add new lines after
	%OPTIONS%, when not at the end of the help.
	Change help doc or code
	producing the help doc to respect the invariants.
	* maint-test-options.c (_initialize_maint_test_options): Likewise.
	Also removed the new line after 'Options:', as all other commands
	do not put an empty line between 'Options:' and the first option.
	* printcmd.c (_initialize_printcmd): Likewise.
	* stack.c (_initialize_stack): Likewise.
	* interps.c (interpreter_exec_cmd): Fix "Usage:" line that was
	incorrectly telling COMMAND is optional.
	* ada-lang.c (_initialize_ada_language): Change help doc or code
	producing the help doc to respect the invariants.
	* ada-tasks.c (_initialize_ada_tasks): Likewise.
	* breakpoint.c (_initialize_breakpoint): Likewise.
	* cli/cli-cmds.c (_initialize_cli_cmds): Likewise.
	* cli/cli-logging.c (_initialize_cli_logging): Likewise.
	* cli/cli-setshow.c (_initialize_cli_setshow): Likewise.
	* cli/cli-style.c (cli_style_option::add_setshow_commands,
	_initialize_cli_style): Likewise.
	* corelow.c (core_target_info): Likewise.
	* dwarf-index-cache.c (_initialize_index_cache): Likewise.
	* dwarf2read.c (_initialize_dwarf2_read): Likewise.
	* filesystem.c (_initialize_filesystem): Likewise.
	* frame.c (_initialize_frame): Likewise.
	* gnu-nat.c (add_task_commands): Likewise.
	* infcall.c (_initialize_infcall): Likewise.
	* infcmd.c (_initialize_infcmd): Likewise.
	* interps.c (_initialize_interpreter): Likewise.
	* language.c (_initialize_language): Likewise.
	* linux-fork.c (_initialize_linux_fork): Likewise.
	* maint-test-settings.c (_initialize_maint_test_settings): Likewise.
	* maint.c (_initialize_maint_cmds): Likewise.
	* memattr.c (_initialize_mem): Likewise.
	* printcmd.c (_initialize_printcmd): Likewise.
	* python/lib/gdb/function/strfns.py (_MemEq, _StrLen, _StrEq,
	_RegEx): Likewise.
	* ravenscar-thread.c (_initialize_ravenscar): Likewise.
	* record-btrace.c (_initialize_record_btrace): Likewise.
	* record-full.c (_initialize_record_full): Likewise.
	* record.c (_initialize_record): Likewise.
	* regcache-dump.c (_initialize_regcache_dump): Likewise.
	* regcache.c (_initialize_regcache): Likewise.
	* remote.c (add_packet_config_cmd, init_remote_threadtests,
	_initialize_remote): Likewise.
	* ser-tcp.c (_initialize_ser_tcp): Likewise.
	* serial.c (_initialize_serial): Likewise.
	* skip.c (_initialize_step_skip): Likewise.
	* source.c (_initialize_source): Likewise.
	* stack.c (_initialize_stack): Likewise.
	* symfile.c (_initialize_symfile): Likewise.
	* symtab.c (_initialize_symtab): Likewise.
	* target-descriptions.c (_initialize_target_descriptions): Likewise.
	* top.c (init_main): Likewise.
	* tracefile-tfile.c (tfile_target_info): Likewise.
	* tracepoint.c (_initialize_tracepoint): Likewise.
	* tui/tui-win.c (_initialize_tui_win): Likewise.
	* utils.c (add_internal_problem_command): Likewise.
	* valprint.c (value_print_option_defs): Likewise.

gdb/testsuite/ChangeLog
2019-08-07  Philippe Waroquiers  <philippe.waroquiers@skynet.be>

	* gdb.base/style.exp: Update tests for help doc new invariants.
	* gdb.base/help.exp: Likewise.

1 files changed, 11 insertions, 10 deletions

diff --git a/gdb/maint.c b/gdb/maint.c
index 96a1377..f7485dc 100644
--- a/gdb/maint.c
+++ b/gdb/maint.c
@@ -1012,7 +1012,7 @@ Commands for showing internal info about the program being debugged."),
   add_alias_cmd ("i", "info", class_maintenance, 1, &maintenancelist);
 
   add_cmd ("sections", class_maintenance, maintenance_info_sections, _("\
-List the BFD sections of the exec and core files. \n\
+List the BFD sections of the exec and core files.\n\
 Arguments may be any combination of:\n\
 	[one or more section names]\n\
 	ALLOC LOAD RELOC READONLY CODE DATA ROM CONSTRUCTOR\n\
@@ -1165,21 +1165,22 @@ Commands for checking internal gdb state."),
 	   &maintenancelist);
 
   add_cmd ("deprecate", class_maintenance, maintenance_deprecate, _("\
-Deprecate a command.  Note that this is just in here so the \n\
-testsuite can check the command deprecator. You probably shouldn't use this,\n\
-rather you should use the C function deprecate_cmd().  If you decide you \n\
-want to use it: maintenance deprecate 'commandname' \"replacement\". The \n\
-replacement is optional."), &maintenancelist);
+Deprecate a command (for testing purposes).\n\
+Usage: maintenance deprecate COMMANDNAME [\"REPLACEMENT\"]\n\
+This is used by the testsuite to check the command deprecator.\n\
+You probably shouldn't use this,\n\
+rather you should use the C function deprecate_cmd()."), &maintenancelist);
 
   add_cmd ("undeprecate", class_maintenance, maintenance_undeprecate, _("\
-Undeprecate a command.  Note that this is just in here so the \n\
-testsuite can check the command deprecator. You probably shouldn't use this,\n\
-If you decide you want to use it: maintenance undeprecate 'commandname'"),
+Undeprecate a command (for testing purposes).\n\
+Usage: maintenance undeprecate COMMANDNAME\n\
+This is used by the testsuite to check the command deprecator.\n\
+You probably shouldn't use this."),
 	   &maintenancelist);
 
   add_cmd ("selftest", class_maintenance, maintenance_selftest, _("\
 Run gdb's unit tests.\n\
-Usage: maintenance selftest [filter]\n\
+Usage: maintenance selftest [FILTER]\n\
 This will run any unit tests that were built in to gdb.\n\
 If a filter is given, only the tests with that value in their name will ran."),
 	   &maintenancelist);