* infrun.c: Backout the previous change.

1 files changed, 81 insertions, 91 deletions

diff --git a/gdb/infrun.c b/gdb/infrun.c
index 7283aa7..b16cc62 100644
--- a/gdb/infrun.c
+++ b/gdb/infrun.c
@@ -987,8 +987,6 @@ struct execution_control_state
 
 void init_execution_control_state (struct execution_control_state *ecs);
 
-static void handle_step_into_function (struct execution_control_state *ecs,
-                                       CORE_ADDR real_stop_pc);
 void handle_inferior_event (struct execution_control_state *ecs);
 
 static void check_sigtramp2 (struct execution_control_state *ecs);
@@ -1238,94 +1236,6 @@ pc_in_sigtramp (CORE_ADDR pc)
   return PC_IN_SIGTRAMP (pc, name);
 }
 
-/* Handle the inferior event in the cases when we just stepped
-   into a function.  */
-
-static void
-handle_step_into_function (struct execution_control_state *ecs,
-                           CORE_ADDR real_stop_pc)
-{
-  if ((step_over_calls == STEP_OVER_NONE)
-      || ((step_range_end == 1)
-          && in_prologue (prev_pc, ecs->stop_func_start)))
-    {
-      /* I presume that step_over_calls is only 0 when we're
-         supposed to be stepping at the assembly language level
-         ("stepi").  Just stop.  */
-      /* Also, maybe we just did a "nexti" inside a prolog,
-         so we thought it was a subroutine call but it was not.
-         Stop as well.  FENN */
-      stop_step = 1;
-      print_stop_reason (END_STEPPING_RANGE, 0);
-      stop_stepping (ecs);
-      return;
-    }
-
-  if (step_over_calls == STEP_OVER_ALL || IGNORE_HELPER_CALL (stop_pc))
-    {
-      /* We're doing a "next".  */
-
-      if (pc_in_sigtramp (stop_pc)
-          && frame_id_inner (step_frame_id,
-                             frame_id_build (read_sp (), 0)))
-        /* We stepped out of a signal handler, and into its
-           calling trampoline.  This is misdetected as a
-           subroutine call, but stepping over the signal
-           trampoline isn't such a bad idea.  In order to do that,
-           we have to ignore the value in step_frame_id, since
-           that doesn't represent the frame that'll reach when we
-           return from the signal trampoline.  Otherwise we'll
-           probably continue to the end of the program.  */
-        step_frame_id = null_frame_id;
-
-      step_over_function (ecs);
-      keep_going (ecs);
-      return;
-    }
-
-  /* If we are in a function call trampoline (a stub between
-     the calling routine and the real function), locate the real
-     function.  That's what tells us (a) whether we want to step
-     into it at all, and (b) what prologue we want to run to
-     the end of, if we do step into it.  */
-  real_stop_pc = skip_language_trampoline (stop_pc);
-  if (real_stop_pc == 0)
-    real_stop_pc = SKIP_TRAMPOLINE_CODE (stop_pc);
-  if (real_stop_pc != 0)
-    ecs->stop_func_start = real_stop_pc;
-
-  /* If we have line number information for the function we
-     are thinking of stepping into, step into it.
-
-     If there are several symtabs at that PC (e.g. with include
-     files), just want to know whether *any* of them have line
-     numbers.  find_pc_line handles this.  */
-  {
-    struct symtab_and_line tmp_sal;
-
-    tmp_sal = find_pc_line (ecs->stop_func_start, 0);
-    if (tmp_sal.line != 0)
-      {
-        step_into_function (ecs);
-        return;
-      }
-  }
-
-  /* If we have no line number and the step-stop-if-no-debug
-     is set, we stop the step so that the user has a chance to
-     switch in assembly mode.  */
-  if (step_over_calls == STEP_OVER_UNDEBUGGABLE && step_stop_if_no_debug)
-    {
-      stop_step = 1;
-      print_stop_reason (END_STEPPING_RANGE, 0);
-      stop_stepping (ecs);
-      return;
-    }
-
-  step_over_function (ecs);
-  keep_going (ecs);
-  return;
-}
 
 /* Given an execution control state that has been freshly filled in
    by an event from the inferior, figure out what it means and take
@@ -2569,8 +2479,88 @@ process_event_stop_test:
       || ecs->stop_func_name == 0)
     {
       /* It's a subroutine call.  */
-      handle_step_into_function (ecs, real_stop_pc);
+
+      if ((step_over_calls == STEP_OVER_NONE)
+	  || ((step_range_end == 1)
+	      && in_prologue (prev_pc, ecs->stop_func_start)))
+	{
+	  /* I presume that step_over_calls is only 0 when we're
+	     supposed to be stepping at the assembly language level
+	     ("stepi").  Just stop.  */
+	  /* Also, maybe we just did a "nexti" inside a prolog,
+	     so we thought it was a subroutine call but it was not.
+	     Stop as well.  FENN */
+	  stop_step = 1;
+	  print_stop_reason (END_STEPPING_RANGE, 0);
+	  stop_stepping (ecs);
+	  return;
+	}
+
+      if (step_over_calls == STEP_OVER_ALL || IGNORE_HELPER_CALL (stop_pc))
+	{
+	  /* We're doing a "next".  */
+
+	  if (pc_in_sigtramp (stop_pc)
+	      && frame_id_inner (step_frame_id,
+				 frame_id_build (read_sp (), 0)))
+	    /* We stepped out of a signal handler, and into its
+	       calling trampoline.  This is misdetected as a
+	       subroutine call, but stepping over the signal
+	       trampoline isn't such a bad idea.  In order to do that,
+	       we have to ignore the value in step_frame_id, since
+	       that doesn't represent the frame that'll reach when we
+	       return from the signal trampoline.  Otherwise we'll
+	       probably continue to the end of the program.  */
+	    step_frame_id = null_frame_id;
+
+	  step_over_function (ecs);
+	  keep_going (ecs);
+	  return;
+	}
+
+      /* If we are in a function call trampoline (a stub between
+         the calling routine and the real function), locate the real
+         function.  That's what tells us (a) whether we want to step
+         into it at all, and (b) what prologue we want to run to
+         the end of, if we do step into it.  */
+      real_stop_pc = skip_language_trampoline (stop_pc);
+      if (real_stop_pc == 0)
+	real_stop_pc = SKIP_TRAMPOLINE_CODE (stop_pc);
+      if (real_stop_pc != 0)
+	ecs->stop_func_start = real_stop_pc;
+
+      /* If we have line number information for the function we
+         are thinking of stepping into, step into it.
+
+         If there are several symtabs at that PC (e.g. with include
+         files), just want to know whether *any* of them have line
+         numbers.  find_pc_line handles this.  */
+      {
+	struct symtab_and_line tmp_sal;
+
+	tmp_sal = find_pc_line (ecs->stop_func_start, 0);
+	if (tmp_sal.line != 0)
+	  {
+	    step_into_function (ecs);
+	    return;
+	  }
+      }
+
+      /* If we have no line number and the step-stop-if-no-debug
+         is set, we stop the step so that the user has a chance to
+         switch in assembly mode.  */
+      if (step_over_calls == STEP_OVER_UNDEBUGGABLE && step_stop_if_no_debug)
+	{
+	  stop_step = 1;
+	  print_stop_reason (END_STEPPING_RANGE, 0);
+	  stop_stepping (ecs);
+	  return;
+	}
+
+      step_over_function (ecs);
+      keep_going (ecs);
       return;
+
     }
 
   /* We've wandered out of the step range.  */