Initial creation of sourceware repository

1 files changed, 0 insertions, 737 deletions

diff --git a/gdb/inflow.c b/gdb/inflow.c
deleted file mode 100644
index 6c5b793..0000000
--- a/gdb/inflow.c
+++ /dev/null
@@ -1,737 +0,0 @@
-/* Low level interface to ptrace, for GDB when running under Unix.
-   Copyright 1986, 1987, 1989, 1991, 1992, 1995 Free Software Foundation, Inc.
-
-This file is part of GDB.
-
-This program is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
-
-#include "defs.h"
-#include "frame.h"
-#include "inferior.h"
-#include "command.h"
-#include "signals.h"
-#include "serial.h"
-#include "terminal.h"
-#include "target.h"
-#include "gdbthread.h"
-
-#include "gdb_string.h"
-#include <signal.h>
-#include <fcntl.h>
-#ifdef HAVE_UNISTD_H
-#include <unistd.h>
-#endif
-
-#ifdef HAVE_TERMIOS
-#define PROCESS_GROUP_TYPE pid_t
-#endif
-
-#ifdef HAVE_SGTTY
-#ifdef SHORT_PGRP
-/* This is only used for the ultra.  Does it have pid_t?  */
-#define PROCESS_GROUP_TYPE short
-#else
-#define PROCESS_GROUP_TYPE int
-#endif
-#endif /* sgtty */
-
-#if defined (SIGIO) && defined (FASYNC) && defined (FD_SET) && defined (F_SETOWN)
-static void
-handle_sigio PARAMS ((int));
-#endif
-
-static void
-pass_signal PARAMS ((int));
-
-static void
-kill_command PARAMS ((char *, int));
-
-static void
-terminal_ours_1 PARAMS ((int));
-
-/* Record terminal status separately for debugger and inferior.  */
-
-static serial_t stdin_serial;
-
-/* TTY state for the inferior.  We save it whenever the inferior stops, and
-   restore it when it resumes.  */
-static serial_ttystate inferior_ttystate;
-
-/* Our own tty state, which we restore every time we need to deal with the
-   terminal.  We only set it once, when GDB first starts.  The settings of
-   flags which readline saves and restores and unimportant.  */
-static serial_ttystate our_ttystate;
-
-/* fcntl flags for us and the inferior.  Saved and restored just like
-   {our,inferior}_ttystate.  */
-static int tflags_inferior;
-static int tflags_ours;
-
-#ifdef PROCESS_GROUP_TYPE
-/* Process group for us and the inferior.  Saved and restored just like
-   {our,inferior}_ttystate.  */
-PROCESS_GROUP_TYPE our_process_group;
-PROCESS_GROUP_TYPE inferior_process_group;
-#endif
-
-/* While the inferior is running, we want SIGINT and SIGQUIT to go to the
-   inferior only.  If we have job control, that takes care of it.  If not,
-   we save our handlers in these two variables and set SIGINT and SIGQUIT
-   to SIG_IGN.  */
-
-static void (*sigint_ours) ();
-static void (*sigquit_ours) ();
-
-/* The name of the tty (from the `tty' command) that we gave to the inferior
-   when it was last started.  */
-
-static char *inferior_thisrun_terminal;
-
-/* Nonzero if our terminal settings are in effect.  Zero if the
-   inferior's settings are in effect.  Ignored if !gdb_has_a_terminal
-   ().  */
-
-static int terminal_is_ours;
-
-enum {yes, no, have_not_checked} gdb_has_a_terminal_flag = have_not_checked;
-
-/* Does GDB have a terminal (on stdin)?  */
-int
-gdb_has_a_terminal ()
-{
-  switch (gdb_has_a_terminal_flag)
-    {
-    case yes:
-      return 1;
-    case no:
-      return 0;
-    case have_not_checked:
-      /* Get all the current tty settings (including whether we have a tty at
-	 all!).  Can't do this in _initialize_inflow because SERIAL_FDOPEN
-	 won't work until the serial_ops_list is initialized.  */
-
-#ifdef F_GETFL
-      tflags_ours = fcntl (0, F_GETFL, 0);
-#endif
-
-      gdb_has_a_terminal_flag = no;
-      stdin_serial = SERIAL_FDOPEN (0);
-      if (stdin_serial != NULL)
-	{
-	  our_ttystate = SERIAL_GET_TTY_STATE (stdin_serial);
-
-	  if (our_ttystate != NULL)
-	    {
-	      gdb_has_a_terminal_flag = yes;
-#ifdef HAVE_TERMIOS
-	      our_process_group = tcgetpgrp (0);
-#endif
-#ifdef HAVE_SGTTY
-	      ioctl (0, TIOCGPGRP, &our_process_group);
-#endif
-	    }
-	}
-
-      return gdb_has_a_terminal_flag == yes;
-    default:
-      /* "Can't happen".  */
-      return 0;
-    }
-}
-
-/* Macro for printing errors from ioctl operations */
-
-#define	OOPSY(what)	\
-  if (result == -1)	\
-    fprintf_unfiltered(gdb_stderr, "[%s failed in terminal_inferior: %s]\n", \
-	    what, strerror (errno))
-
-static void terminal_ours_1 PARAMS ((int));
-
-/* Initialize the terminal settings we record for the inferior,
-   before we actually run the inferior.  */
-
-void
-terminal_init_inferior_with_pgrp (pgrp)
-     int pgrp;
-{
-  if (gdb_has_a_terminal ())
-    {
-      /* We could just as well copy our_ttystate (if we felt like adding
-	 a new function SERIAL_COPY_TTY_STATE).  */
-      if (inferior_ttystate)
-	free (inferior_ttystate);
-      inferior_ttystate = SERIAL_GET_TTY_STATE (stdin_serial);
-
-#ifdef PROCESS_GROUP_TYPE
-      inferior_process_group = pgrp;
-#endif
-
-      /* Make sure that next time we call terminal_inferior (which will be
-	 before the program runs, as it needs to be), we install the new
-	 process group.  */
-      terminal_is_ours = 1;
-    }
-}
-
-void
-terminal_init_inferior ()
-{
-#ifdef PROCESS_GROUP_TYPE
-#ifdef PIDGET
-  /* This is for Lynx, and should be cleaned up by having Lynx be a separate
-     debugging target with a version of target_terminal_init_inferior which
-     passes in the process group to a generic routine which does all the work
-     (and the non-threaded child_terminal_init_inferior can just pass in
-     inferior_pid to the same routine).  */
-  terminal_init_inferior_with_pgrp (PIDGET (inferior_pid));
-#else
-  /* By default, we assume INFERIOR_PID is also the child's process group.  */
-  terminal_init_inferior_with_pgrp (inferior_pid);
-#endif
-#endif /* PROCESS_GROUP_TYPE */
-}
-
-/* Put the inferior's terminal settings into effect.
-   This is preparation for starting or resuming the inferior.  */
-
-void
-terminal_inferior ()
-{
-  if (gdb_has_a_terminal () && terminal_is_ours
-      && inferior_thisrun_terminal == 0)
-    {
-      int result;
-
-#ifdef F_GETFL
-      /* Is there a reason this is being done twice?  It happens both
-	 places we use F_SETFL, so I'm inclined to think perhaps there
-	 is some reason, however perverse.  Perhaps not though...  */
-      result = fcntl (0, F_SETFL, tflags_inferior);
-      result = fcntl (0, F_SETFL, tflags_inferior);
-      OOPSY ("fcntl F_SETFL");
-#endif
-
-      /* Because we were careful to not change in or out of raw mode in
-	 terminal_ours, we will not change in our out of raw mode with
-	 this call, so we don't flush any input.  */
-      result = SERIAL_SET_TTY_STATE (stdin_serial, inferior_ttystate);
-      OOPSY ("setting tty state");
-
-      if (!job_control)
-	{
-	  sigint_ours = (void (*) ()) signal (SIGINT, SIG_IGN);
-	  sigquit_ours = (void (*) ()) signal (SIGQUIT, SIG_IGN);
-	}
-
-      /* If attach_flag is set, we don't know whether we are sharing a
-	 terminal with the inferior or not.  (attaching a process
-	 without a terminal is one case where we do not; attaching a
-	 process which we ran from the same shell as GDB via `&' is
-	 one case where we do, I think (but perhaps this is not
-	 `sharing' in the sense that we need to save and restore tty
-	 state)).  I don't know if there is any way to tell whether we
-	 are sharing a terminal.  So what we do is to go through all
-	 the saving and restoring of the tty state, but ignore errors
-	 setting the process group, which will happen if we are not
-	 sharing a terminal).  */
-
-      if (job_control)
-	{
-#ifdef HAVE_TERMIOS
-	  result = tcsetpgrp (0, inferior_process_group);
-	  if (!attach_flag)
-	    OOPSY ("tcsetpgrp");
-#endif
-
-#ifdef HAVE_SGTTY
-	  result = ioctl (0, TIOCSPGRP, &inferior_process_group);
-	  if (!attach_flag)
-	    OOPSY ("TIOCSPGRP");
-#endif
-	}
-
-    }
-  terminal_is_ours = 0;
-}
-
-/* Put some of our terminal settings into effect,
-   enough to get proper results from our output,
-   but do not change into or out of RAW mode
-   so that no input is discarded.
-
-   After doing this, either terminal_ours or terminal_inferior
-   should be called to get back to a normal state of affairs.  */
-
-void
-terminal_ours_for_output ()
-{
-  terminal_ours_1 (1);
-}
-
-/* Put our terminal settings into effect.
-   First record the inferior's terminal settings
-   so they can be restored properly later.  */
-
-void
-terminal_ours ()
-{
-  terminal_ours_1 (0);
-}
-
-/* output_only is not used, and should not be used unless we introduce
-   separate terminal_is_ours and terminal_is_ours_for_output
-   flags.  */
-
-static void
-terminal_ours_1 (output_only)
-     int output_only;
-{
-  /* Checking inferior_thisrun_terminal is necessary so that
-     if GDB is running in the background, it won't block trying
-     to do the ioctl()'s below.  Checking gdb_has_a_terminal
-     avoids attempting all the ioctl's when running in batch.  */
-  if (inferior_thisrun_terminal != 0 || gdb_has_a_terminal () == 0)
-    return;
-
-  if (!terminal_is_ours)
-    {
-      /* Ignore this signal since it will happen when we try to set the
-	 pgrp.  */
-      void (*osigttou) ();
-      int result;
-
-      terminal_is_ours = 1;
-
-#ifdef SIGTTOU
-      if (job_control)
-	osigttou = (void (*) ()) signal (SIGTTOU, SIG_IGN);
-#endif
-
-      if (inferior_ttystate)
-	free (inferior_ttystate);
-      inferior_ttystate = SERIAL_GET_TTY_STATE (stdin_serial);
-#ifdef HAVE_TERMIOS
-      inferior_process_group = tcgetpgrp (0);
-#endif
-#ifdef HAVE_SGTTY
-      ioctl (0, TIOCGPGRP, &inferior_process_group);
-#endif
-
-      /* Here we used to set ICANON in our ttystate, but I believe this
-	 was an artifact from before when we used readline.  Readline sets
-	 the tty state when it needs to.
-	 FIXME-maybe: However, query() expects non-raw mode and doesn't
-	 use readline.  Maybe query should use readline (on the other hand,
-	 this only matters for HAVE_SGTTY, not termio or termios, I think).  */
-
-      /* Set tty state to our_ttystate.  We don't change in our out of raw
-	 mode, to avoid flushing input.  We need to do the same thing
-	 regardless of output_only, because we don't have separate
-	 terminal_is_ours and terminal_is_ours_for_output flags.  It's OK,
-	 though, since readline will deal with raw mode when/if it needs to.
-	 */
-
-      SERIAL_NOFLUSH_SET_TTY_STATE (stdin_serial, our_ttystate,
-				    inferior_ttystate);
-
-      if (job_control)
-	{
-#ifdef HAVE_TERMIOS
-	  result = tcsetpgrp (0, our_process_group);
-#if 0
-	  /* This fails on Ultrix with EINVAL if you run the testsuite
-	     in the background with nohup, and then log out.  GDB never
-	     used to check for an error here, so perhaps there are other
-	     such situations as well.  */
-	  if (result == -1)
-	    fprintf_unfiltered (gdb_stderr, "[tcsetpgrp failed in terminal_ours: %s]\n",
-		     strerror (errno));
-#endif
-#endif /* termios */
-
-#ifdef HAVE_SGTTY
-	  result = ioctl (0, TIOCSPGRP, &our_process_group);
-#endif
-	}
-
-#ifdef SIGTTOU
-      if (job_control)
-	signal (SIGTTOU, osigttou);
-#endif
-
-      if (!job_control)
-	{
-	  signal (SIGINT, sigint_ours);
-	  signal (SIGQUIT, sigquit_ours);
-	}
-
-#ifdef F_GETFL
-      tflags_inferior = fcntl (0, F_GETFL, 0);
-
-      /* Is there a reason this is being done twice?  It happens both
-	 places we use F_SETFL, so I'm inclined to think perhaps there
-	 is some reason, however perverse.  Perhaps not though...  */
-      result = fcntl (0, F_SETFL, tflags_ours);
-      result = fcntl (0, F_SETFL, tflags_ours);
-#endif
-
-      result = result;	/* lint */
-    }
-}
-
-/* ARGSUSED */
-void
-term_info (arg, from_tty)
-     char *arg;
-     int from_tty;
-{
-  target_terminal_info (arg, from_tty);
-}
-
-/* ARGSUSED */
-void
-child_terminal_info (args, from_tty)
-     char *args;
-     int from_tty;
-{
-  if (!gdb_has_a_terminal ())
-    {
-      printf_filtered ("This GDB does not control a terminal.\n");
-      return;
-    }
-
-  printf_filtered ("Inferior's terminal status (currently saved by GDB):\n");
-
-  /* First the fcntl flags.  */
-  {
-    int flags;
-    
-    flags = tflags_inferior;
-
-    printf_filtered ("File descriptor flags = ");
-
-#ifndef O_ACCMODE
-#define O_ACCMODE (O_RDONLY | O_WRONLY | O_RDWR)
-#endif
-    /* (O_ACCMODE) parens are to avoid Ultrix header file bug */
-    switch (flags & (O_ACCMODE))
-      {
-      case O_RDONLY: printf_filtered ("O_RDONLY"); break;
-      case O_WRONLY: printf_filtered ("O_WRONLY"); break;
-      case O_RDWR: printf_filtered ("O_RDWR"); break;
-      }
-    flags &= ~(O_ACCMODE);
-
-#ifdef O_NONBLOCK
-    if (flags & O_NONBLOCK) 
-      printf_filtered (" | O_NONBLOCK");
-    flags &= ~O_NONBLOCK;
-#endif
-    
-#if defined (O_NDELAY)
-    /* If O_NDELAY and O_NONBLOCK are defined to the same thing, we will
-       print it as O_NONBLOCK, which is good cause that is what POSIX
-       has, and the flag will already be cleared by the time we get here.  */
-    if (flags & O_NDELAY)
-      printf_filtered (" | O_NDELAY");
-    flags &= ~O_NDELAY;
-#endif
-
-    if (flags & O_APPEND)
-      printf_filtered (" | O_APPEND");
-    flags &= ~O_APPEND;
-
-#if defined (O_BINARY)
-    if (flags & O_BINARY)
-      printf_filtered (" | O_BINARY");
-    flags &= ~O_BINARY;
-#endif
-
-    if (flags)
-      printf_filtered (" | 0x%x", flags);
-    printf_filtered ("\n");
-  }
-
-#ifdef PROCESS_GROUP_TYPE
-  printf_filtered ("Process group = %d\n", inferior_process_group);
-#endif
-
-  SERIAL_PRINT_TTY_STATE (stdin_serial, inferior_ttystate);
-}
-
-/* NEW_TTY_PREFORK is called before forking a new child process,
-   so we can record the state of ttys in the child to be formed.
-   TTYNAME is null if we are to share the terminal with gdb;
-   or points to a string containing the name of the desired tty.
-
-   NEW_TTY is called in new child processes under Unix, which will
-   become debugger target processes.  This actually switches to
-   the terminal specified in the NEW_TTY_PREFORK call.  */
-
-void
-new_tty_prefork (ttyname)
-     char *ttyname;
-{
-  /* Save the name for later, for determining whether we and the child
-     are sharing a tty.  */
-  inferior_thisrun_terminal = ttyname;
-}
-
-void
-new_tty ()
-{
-  register int tty;
-
-  if (inferior_thisrun_terminal == 0)
-    return;
-#if !defined(__GO32__) && !defined(__WIN32__)
-#ifdef TIOCNOTTY
-  /* Disconnect the child process from our controlling terminal.  On some
-     systems (SVR4 for example), this may cause a SIGTTOU, so temporarily
-     ignore SIGTTOU. */
-  tty = open("/dev/tty", O_RDWR);
-  if (tty > 0)
-    {
-      void (*osigttou) ();
-
-      osigttou = (void (*)()) signal(SIGTTOU, SIG_IGN);
-      ioctl(tty, TIOCNOTTY, 0);
-      close(tty);
-      signal(SIGTTOU, osigttou);
-    }
-#endif
-
-  /* Now open the specified new terminal.  */
-
-#ifdef USE_O_NOCTTY
-  tty = open(inferior_thisrun_terminal, O_RDWR | O_NOCTTY);
-#else
-  tty = open(inferior_thisrun_terminal, O_RDWR);
-#endif
-  if (tty == -1)
-    {
-      print_sys_errmsg (inferior_thisrun_terminal, errno);
-      _exit(1);
-    }
-
-  /* Avoid use of dup2; doesn't exist on all systems.  */
-  if (tty != 0)
-    { close (0); dup (tty); }
-  if (tty != 1)
-    { close (1); dup (tty); }
-  if (tty != 2)
-    { close (2); dup (tty); }
-  if (tty > 2)
-    close(tty);
-#endif /* !go32 && !win32*/
-}
-
-/* Kill the inferior process.  Make us have no inferior.  */
-
-/* ARGSUSED */
-static void
-kill_command (arg, from_tty)
-     char *arg;
-     int from_tty;
-{
-  /* FIXME:  This should not really be inferior_pid (or target_has_execution).
-     It should be a distinct flag that indicates that a target is active, cuz
-     some targets don't have processes! */
-
-  if (inferior_pid == 0)
-    error ("The program is not being run.");
-  if (!query ("Kill the program being debugged? "))
-    error ("Not confirmed.");
-  target_kill ();
-
-  init_thread_list();		/* Destroy thread info */
-
-  /* Killing off the inferior can leave us with a core file.  If so,
-     print the state we are left in.  */
-  if (target_has_stack) {
-    printf_filtered ("In %s,\n", target_longname);
-    if (selected_frame == NULL)
-      fputs_filtered ("No selected stack frame.\n", gdb_stdout);
-    else
-      print_stack_frame (selected_frame, selected_frame_level, 1);
-  }
-}
-
-/* Call set_sigint_trap when you need to pass a signal on to an attached
-   process when handling SIGINT */
-
-/* ARGSUSED */
-static void
-pass_signal (signo)
-    int signo;
-{
-  kill (inferior_pid, SIGINT);
-}
-
-static void (*osig)();
-
-void
-set_sigint_trap()
-{
-  if (attach_flag || inferior_thisrun_terminal)
-    {
-      osig = (void (*) ()) signal (SIGINT, pass_signal);
-    }
-}
-
-void
-clear_sigint_trap()
-{
-  if (attach_flag || inferior_thisrun_terminal)
-    {
-      signal (SIGINT, osig);
-    }
-}
-
-#if defined (SIGIO) && defined (FASYNC) && defined (FD_SET) && defined (F_SETOWN)
-static void (*old_sigio) ();
-
-static void
-handle_sigio (signo)
-     int signo;
-{
-  int numfds;
-  fd_set readfds;
-
-  signal (SIGIO, handle_sigio);
-
-  FD_ZERO (&readfds);
-  FD_SET (target_activity_fd, &readfds);
-  numfds = select (target_activity_fd + 1, &readfds, NULL, NULL, NULL);
-  if (numfds >= 0 && FD_ISSET (target_activity_fd, &readfds))
-    {
-      if ((*target_activity_function) ())
-	kill (inferior_pid, SIGINT);
-    }
-}
-
-static int old_fcntl_flags;
-
-void
-set_sigio_trap ()
-{
-  if (target_activity_function)
-    {
-      old_sigio = (void (*) ()) signal (SIGIO, handle_sigio);
-      fcntl (target_activity_fd, F_SETOWN, getpid()); 
-      old_fcntl_flags = fcntl (target_activity_fd, F_GETFL, 0);
-      fcntl (target_activity_fd, F_SETFL, old_fcntl_flags | FASYNC);
-    }
-}
-
-void
-clear_sigio_trap ()
-{
-  if (target_activity_function)
-    {
-      signal (SIGIO, old_sigio);
-      fcntl (target_activity_fd, F_SETFL, old_fcntl_flags);
-    }
-}
-#else /* No SIGIO.  */
-void
-set_sigio_trap ()
-{
-  if (target_activity_function)
-    abort ();
-}
-
-void
-clear_sigio_trap ()
-{
-  if (target_activity_function)
-    abort ();
-}
-#endif /* No SIGIO.  */
-
-
-/* This is here because this is where we figure out whether we (probably)
-   have job control.  Just using job_control only does part of it because
-   setpgid or setpgrp might not exist on a system without job control.
-   It might be considered misplaced (on the other hand, process groups and
-   job control are closely related to ttys).
-
-   For a more clean implementation, in libiberty, put a setpgid which merely
-   calls setpgrp and a setpgrp which does nothing (any system with job control
-   will have one or the other).  */
-int
-gdb_setpgid ()
-{
-  int retval = 0;
-
-  if (job_control)
-    {
-#if defined (NEED_POSIX_SETPGID) || (defined (HAVE_TERMIOS) && defined (HAVE_SETPGID))
-      /* setpgid (0, 0) is supposed to work and mean the same thing as
-	 this, but on Ultrix 4.2A it fails with EPERM (and
-	 setpgid (getpid (), getpid ()) succeeds).  */
-      retval = setpgid (getpid (), getpid ());
-#else
-#if defined (TIOCGPGRP)
-#if defined(USG) && !defined(SETPGRP_ARGS)
-      retval = setpgrp ();
-#else
-      retval = setpgrp (getpid (), getpid ());
-#endif /* USG */
-#endif /* TIOCGPGRP.  */
-#endif /* NEED_POSIX_SETPGID */
-    }
-  return retval;
-}
-
-void
-_initialize_inflow ()
-{
-  add_info ("terminal", term_info,
-	   "Print inferior's saved terminal status.");
-
-  add_com ("kill", class_run, kill_command,
-	   "Kill execution of program being debugged.");
-
-  inferior_pid = 0;
-
-  terminal_is_ours = 1;
-
-  /* OK, figure out whether we have job control.  If neither termios nor
-     sgtty (i.e. termio or go32), leave job_control 0.  */
-
-#if defined (HAVE_TERMIOS)
-  /* Do all systems with termios have the POSIX way of identifying job
-     control?  I hope so.  */
-#ifdef _POSIX_JOB_CONTROL
-  job_control = 1;
-#else
-#ifdef _SC_JOB_CONTROL
-  job_control = sysconf (_SC_JOB_CONTROL);
-#else
-  job_control = 0;	/* have to assume the worst */
-#endif	/* _SC_JOB_CONTROL */
-#endif	/* _POSIX_JOB_CONTROL */
-#endif	/* HAVE_TERMIOS */
-
-#ifdef HAVE_SGTTY
-#ifdef TIOCGPGRP
-  job_control = 1;
-#else
-  job_control = 0;
-#endif /* TIOCGPGRP */
-#endif /* sgtty */
-}