aboutsummaryrefslogtreecommitdiff
path: root/gdb/doc
diff options
context:
space:
mode:
authorEli Zaretskii <eliz@gnu.org>2005-04-16 12:03:31 +0000
committerEli Zaretskii <eliz@gnu.org>2005-04-16 12:03:31 +0000
commitba04e0634017887daaa4174341f66771d4a4776c (patch)
tree3801967a0dd46f491c0c1ec53dee40aae8d4269f /gdb/doc
parenta5adf40fde5d878fc22dad7662bca9453993753b (diff)
downloadgdb-ba04e0634017887daaa4174341f66771d4a4776c.zip
gdb-ba04e0634017887daaa4174341f66771d4a4776c.tar.gz
gdb-ba04e0634017887daaa4174341f66771d4a4776c.tar.bz2
(M32R/D): Document "sdireset", "sdistatus", "debug_chaos",
"use_debug_dma", "use_mon_code", "use_ib_break", "use_dbt_break". (Debugging Output): Improve wording. (Set Breaks): Add index entry for "hardware breakpoints". (Renesas ICE): Document "e7000", "ftplogin", "ftpload", "drain", and "set/show usehardbreakpoints". (MIPS Embedded): Document "se/show syn-garbage-limit", "set/show monitor-prompt", "set/show monitor-warnings", "pmon".
Diffstat (limited to 'gdb/doc')
-rw-r--r--gdb/doc/ChangeLog7
-rw-r--r--gdb/doc/gdb.texinfo120
2 files changed, 126 insertions, 1 deletions
diff --git a/gdb/doc/ChangeLog b/gdb/doc/ChangeLog
index 225ec5d..e66a415 100644
--- a/gdb/doc/ChangeLog
+++ b/gdb/doc/ChangeLog
@@ -5,6 +5,8 @@
(Files): Document "set/show stop-on-solib-events".
(M32R/D): Document "set/show download-path", "set/show
board-address", "set/show server-address", "upload", "tload".
+ Document "sdireset", "sdistatus", "debug_chaos", "use_debug_dma",
+ "use_mon_code", "use_ib_break", "use_dbt_break".
(Maintenance Commands): Improve indexing.
(Target Commands): Document "set/show hash", "set/show debug
monitor".
@@ -15,6 +17,11 @@
(Objective-C): Add references to "info classes" and "info
selectors".
(Debugging Output): Improve wording.
+ (Set Breaks): Add index entry for "hardware breakpoints".
+ (Renesas ICE): Document "e7000", "ftplogin", "ftpload", "drain",
+ and "set/show usehardbreakpoints".
+ (MIPS Embedded): Document "se/show syn-garbage-limit", "set/show
+ monitor-prompt", "set/show monitor-warnings", "pmon".
2005-04-15 Eli Zaretskii <eliz@gnu.org>
diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo
index 4b9ba6b..f34fdeb 100644
--- a/gdb/doc/gdb.texinfo
+++ b/gdb/doc/gdb.texinfo
@@ -2572,6 +2572,7 @@ way, but the breakpoint is automatically deleted after the first time your
program stops there. @xref{Disabling, ,Disabling breakpoints}.
@kindex hbreak
+@cindex hardware breakpoints
@item hbreak @var{args}
Set a hardware-assisted breakpoint. @var{args} are the same as for the
@code{break} command and the breakpoint is set in the same way, but the
@@ -13607,6 +13608,41 @@ If your E7000 is installed as a host on a TCP/IP network, you can just
specify its hostname; @value{GDBN} uses @code{telnet} to connect.
@end table
+The following special commands are available when debugging with the
+Renesas E7000 ICE:
+
+@table @code
+@item e7000 @var{command}
+@kindex e7000
+@cindex send command to E7000 monitor
+This sends the specified @var{command} to the E7000 monitor.
+
+@item ftplogin @var{machine} @var{username} @var{password} @var{dir}
+@kindex ftplogin@r{, E7000}
+This command records information for subsequent interface with the
+E7000 monitor via the FTP protocol: @value{GDBN} will log into the
+named @var{machine} using specified @var{username} and @var{password},
+and then chdir to the named directory @var{dir}.
+
+@item ftpload @var{file}
+@kindex ftpload@r{, E7000}
+This command uses credentials recorded by @code{ftplogin} to fetch and
+load the named @var{file} from the E7000 monitor.
+
+@item drain
+@kindex drain@r{, E7000}
+This command drains any pending text buffers stored on the E7000.
+
+@item set usehardbreakpoints
+@itemx show usehardbreakpoints
+@kindex set usehardbreakpoints@r{, E7000}
+@kindex show usehardbreakpoints@r{, E7000}
+@cindex hardware breakpoints, and E7000
+These commands set and show the use of hardware breakpoints for all
+breakpoints. @xref{Set Breaks, hardware-assisted breakpoint}, for
+more information about using hardware breakpoints selectively.
+@end table
+
@node Renesas Special
@subsubsection Special @value{GDBN} commands for Renesas micros
@@ -13641,7 +13677,7 @@ memory}. The accepted values for @var{mod} are @code{small},
@end table
@node M32R/D
-@subsection Renesas M32R/D
+@subsection Renesas M32R/D and M32R/SDI
@table @code
@kindex target m32r
@@ -13695,6 +13731,40 @@ executable file is uploaded.
Test the @code{upload} command.
@end table
+The following commands are available for M32R/SDI:
+
+@table @code
+@item sdireset
+@kindex sdireset
+@cindex reset SDI connection, M32R
+This command resets the SDI connection.
+
+@item sdistatus
+@kindex sdistatus
+This command shows the SDI connection status.
+
+@item debug_chaos
+@kindex debug_chaos
+@cindex M32R/Chaos debugging
+Instructs the remote that M32R/Chaos debugging is to be used.
+
+@item use_debug_dma
+@kindex use_debug_dma
+Instructs the remote to use the DEBUG_DMA method of accessing memory.
+
+@item use_mon_code
+@kindex use_mon_code
+Instructs the remote to use the MON_CODE method of accessing memory.
+
+@item use_ib_break
+@kindex use_ib_break
+Instructs the remote to set breakpoints by IB break.
+
+@item use_dbt_break
+@kindex use_dbt_break
+Instructs the remote to set breakpoints by DBT.
+@end table
+
@node M68K
@subsection M68k
@@ -13850,6 +13920,54 @@ The timeout set by @code{set timeout} does not apply when @value{GDBN}
is waiting for your program to stop. In that case, @value{GDBN} waits
forever because it has no way of knowing how long the program is going
to run before stopping.
+
+@item set syn-garbage-limit @var{num}
+@kindex set syn-garbage-limit@r{, MIPS remote}
+@cindex synchronize with remote MIPS target
+Limit the maximum number of characters @value{GDBN} should ignore when
+it tries to synchronize with the remote target. The default is 10
+characters. Setting the limit to -1 means there's no limit.
+
+@item show syn-garbage-limit
+@kindex show syn-garbage-limit@r{, MIPS remote}
+Show the current limit on the number of characters to ignore when
+trying to synchronize with the remote system.
+
+@item set monitor-prompt @var{prompt}
+@kindex set monitor-prompt@r{, MIPS remote}
+@cindex remote monitor prompt
+Tell @value{GDBN} to expect the specified @var{prompt} string from the
+remote monitor. The default depends on the target:
+@table @asis
+@item pmon target
+@samp{PMON}
+@item ddb target
+@samp{NEC010}
+@item lsi target
+@samp{PMON>}
+@end table
+
+@item show monitor-prompt
+@kindex show monitor-prompt@r{, MIPS remote}
+Show the current strings @value{GDBN} expects as the prompt from the
+remote monitor.
+
+@item set monitor-warnings
+@kindex set monitor-warnings@r{, MIPS remote}
+Enable or disable monitor warnings about hardware breakpoints. This
+has effect only for the @code{lsi} target. When on, @value{GDBN} will
+display warning messages whose codes are returned by the @code{lsi}
+PMON monitor for breakpoint commands.
+
+@item show monitor-warnings
+@kindex show monitor-warnings@r{, MIPS remote}
+Show the current setting of printing monitor warnings.
+
+@item pmon @var{command}
+@kindex pmon@r{, MIPS remote}
+@cindex send PMON command
+This command allows sending an arbitrary @var{command} string to the
+monitor. The monitor must be in debug mode for this to work.
@end table
@node OpenRISC 1000