aboutsummaryrefslogtreecommitdiff
path: root/gdb/doc
diff options
context:
space:
mode:
authorJason Molenda <jmolenda@apple.com>2000-02-08 03:37:34 +0000
committerJason Molenda <jmolenda@apple.com>2000-02-08 03:37:34 +0000
commit1171f8d754f71e35fd2f6c4e82b00f3c685e515f (patch)
treeef0c88f5c0af2949e84cf323ffd3db1e2f9ab6ad /gdb/doc
parent2b266721c45fa8b57da9d32c1071a14ab930a40b (diff)
downloadgdb-1171f8d754f71e35fd2f6c4e82b00f3c685e515f.zip
gdb-1171f8d754f71e35fd2f6c4e82b00f3c685e515f.tar.gz
gdb-1171f8d754f71e35fd2f6c4e82b00f3c685e515f.tar.bz2
2000-02-07 Jason Molenda (jsm@bugshack.cygnus.com)
* gdb/config/i386/windows.mh, gdb/doc/GDBvn.texi, gdb/doc/remote.texi, gdb/testsuite/gdb.base/README, gdb/testsuite/gdb.base/crossload.exp, gdb/testsuite/gdb.base/i486-elf.u, gdb/testsuite/gdb.base/i860-elf.u, gdb/testsuite/gdb.base/m68k-aout.u, gdb/testsuite/gdb.base/m68k-aout2.u, gdb/testsuite/gdb.base/m68k-elf.u, gdb/testsuite/gdb.base/mips-ecoff.u, gdb/testsuite/gdb.base/sparc-aout.u, gdb/testsuite/gdb.base/sparc-elf.u, gdb/tui/Makefile, readline/ChangeLog: These files have been removed over the course of the last year, but weren't cvs removed from the old GDB repository on sourceware.
Diffstat (limited to 'gdb/doc')
-rw-r--r--gdb/doc/GDBvn.texi1
-rw-r--r--gdb/doc/remote.texi2202
2 files changed, 0 insertions, 2203 deletions
diff --git a/gdb/doc/GDBvn.texi b/gdb/doc/GDBvn.texi
deleted file mode 100644
index fd722bd..0000000
--- a/gdb/doc/GDBvn.texi
+++ /dev/null
@@ -1 +0,0 @@
-@set GDBVN 4.18
diff --git a/gdb/doc/remote.texi b/gdb/doc/remote.texi
deleted file mode 100644
index 714b2a2..0000000
--- a/gdb/doc/remote.texi
+++ /dev/null
@@ -1,2202 +0,0 @@
-@c -*- Texinfo -*-
-@c Copyright (c) 1990 1991 1992 1993 Free Software Foundation, Inc.
-@c This file is part of the source for the GDB manual.
-
-@node Remote Serial
-@subsection The @value{GDBN} remote serial protocol
-
-@cindex remote serial debugging, overview
-To debug a program running on another machine (the debugging
-@dfn{target} machine), you must first arrange for all the usual
-prerequisites for the program to run by itself. For example, for a C
-program, you need:
-
-@enumerate
-@item
-A startup routine to set up the C runtime environment; these usually
-have a name like @file{crt0}. The startup routine may be supplied by
-your hardware supplier, or you may have to write your own.
-
-@item
-You probably need a C subroutine library to support your program's
-subroutine calls, notably managing input and output.
-
-@item
-A way of getting your program to the other machine---for example, a
-download program. These are often supplied by the hardware
-manufacturer, but you may have to write your own from hardware
-documentation.
-@end enumerate
-
-The next step is to arrange for your program to use a serial port to
-communicate with the machine where @value{GDBN} is running (the @dfn{host}
-machine). In general terms, the scheme looks like this:
-
-@table @emph
-@item On the host,
-@value{GDBN} already understands how to use this protocol; when everything
-else is set up, you can simply use the @samp{target remote} command
-(@pxref{Targets,,Specifying a Debugging Target}).
-
-@item On the target,
-you must link with your program a few special-purpose subroutines that
-implement the @value{GDBN} remote serial protocol. The file containing these
-subroutines is called a @dfn{debugging stub}.
-
-On certain remote targets, you can use an auxiliary program
-@code{gdbserver} instead of linking a stub into your program.
-@xref{Server,,Using the @code{gdbserver} program}, for details.
-@end table
-
-The debugging stub is specific to the architecture of the remote
-machine; for example, use @file{sparc-stub.c} to debug programs on
-@sc{sparc} boards.
-
-@cindex remote serial stub list
-These working remote stubs are distributed with @value{GDBN}:
-
-@table @code
-
-@item i386-stub.c
-@kindex i386-stub.c
-@cindex Intel
-@cindex i386
-For Intel 386 and compatible architectures.
-
-@item m68k-stub.c
-@kindex m68k-stub.c
-@cindex Motorola 680x0
-@cindex m680x0
-For Motorola 680x0 architectures.
-
-@item sh-stub.c
-@kindex sh-stub.c
-@cindex Hitachi
-@cindex SH
-For Hitachi SH architectures.
-
-@item sparc-stub.c
-@kindex sparc-stub.c
-@cindex Sparc
-For @sc{sparc} architectures.
-
-@item sparcl-stub.c
-@kindex sparcl-stub.c
-@cindex Fujitsu
-@cindex SparcLite
-For Fujitsu @sc{sparclite} architectures.
-
-@end table
-
-The @file{README} file in the @value{GDBN} distribution may list other
-recently added stubs.
-
-@menu
-* Stub Contents:: What the stub can do for you
-* Bootstrapping:: What you must do for the stub
-* Debug Session:: Putting it all together
-* Protocol:: Definition of the communication protocol
-* Server:: Using the `gdbserver' program
-* NetWare:: Using the `gdbserve.nlm' program
-@end menu
-
-@node Stub Contents
-@subsubsection What the stub can do for you
-
-@cindex remote serial stub
-The debugging stub for your architecture supplies these three
-subroutines:
-
-@table @code
-@item set_debug_traps
-@kindex set_debug_traps
-@cindex remote serial stub, initialization
-This routine arranges for @code{handle_exception} to run when your
-program stops. You must call this subroutine explicitly near the
-beginning of your program.
-
-@item handle_exception
-@kindex handle_exception
-@cindex remote serial stub, main routine
-This is the central workhorse, but your program never calls it
-explicitly---the setup code arranges for @code{handle_exception} to
-run when a trap is triggered.
-
-@code{handle_exception} takes control when your program stops during
-execution (for example, on a breakpoint), and mediates communications
-with @value{GDBN} on the host machine. This is where the communications
-protocol is implemented; @code{handle_exception} acts as the @value{GDBN}
-representative on the target machine; it begins by sending summary
-information on the state of your program, then continues to execute,
-retrieving and transmitting any information @value{GDBN} needs, until you
-execute a @value{GDBN} command that makes your program resume; at that point,
-@code{handle_exception} returns control to your own code on the target
-machine.
-
-@item breakpoint
-@cindex @code{breakpoint} subroutine, remote
-Use this auxiliary subroutine to make your program contain a
-breakpoint. Depending on the particular situation, this may be the only
-way for @value{GDBN} to get control. For instance, if your target
-machine has some sort of interrupt button, you won't need to call this;
-pressing the interrupt button transfers control to
-@code{handle_exception}---in effect, to @value{GDBN}. On some machines,
-simply receiving characters on the serial port may also trigger a trap;
-again, in that situation, you don't need to call @code{breakpoint} from
-your own program---simply running @samp{target remote} from the host
-@value{GDBN} session gets control.
-
-Call @code{breakpoint} if none of these is true, or if you simply want
-to make certain your program stops at a predetermined point for the
-start of your debugging session.
-@end table
-
-@node Bootstrapping
-@subsubsection What you must do for the stub
-
-@cindex remote stub, support routines
-The debugging stubs that come with @value{GDBN} are set up for a particular
-chip architecture, but they have no information about the rest of your
-debugging target machine.
-
-First of all you need to tell the stub how to communicate with the
-serial port.
-
-@table @code
-@item int getDebugChar()
-@kindex getDebugChar
-Write this subroutine to read a single character from the serial port.
-It may be identical to @code{getchar} for your target system; a
-different name is used to allow you to distinguish the two if you wish.
-
-@item void putDebugChar(int)
-@kindex putDebugChar
-Write this subroutine to write a single character to the serial port.
-It may be identical to @code{putchar} for your target system; a
-different name is used to allow you to distinguish the two if you wish.
-@end table
-
-@cindex control C, and remote debugging
-@cindex interrupting remote targets
-If you want @value{GDBN} to be able to stop your program while it is
-running, you need to use an interrupt-driven serial driver, and arrange
-for it to stop when it receives a @code{^C} (@samp{\003}, the control-C
-character). That is the character which @value{GDBN} uses to tell the
-remote system to stop.
-
-Getting the debugging target to return the proper status to @value{GDBN}
-probably requires changes to the standard stub; one quick and dirty way
-is to just execute a breakpoint instruction (the ``dirty'' part is that
-@value{GDBN} reports a @code{SIGTRAP} instead of a @code{SIGINT}).
-
-Other routines you need to supply are:
-
-@table @code
-@item void exceptionHandler (int @var{exception_number}, void *@var{exception_address})
-@kindex exceptionHandler
-Write this function to install @var{exception_address} in the exception
-handling tables. You need to do this because the stub does not have any
-way of knowing what the exception handling tables on your target system
-are like (for example, the processor's table might be in @sc{rom},
-containing entries which point to a table in @sc{ram}).
-@var{exception_number} is the exception number which should be changed;
-its meaning is architecture-dependent (for example, different numbers
-might represent divide by zero, misaligned access, etc). When this
-exception occurs, control should be transferred directly to
-@var{exception_address}, and the processor state (stack, registers,
-and so on) should be just as it is when a processor exception occurs. So if
-you want to use a jump instruction to reach @var{exception_address}, it
-should be a simple jump, not a jump to subroutine.
-
-For the 386, @var{exception_address} should be installed as an interrupt
-gate so that interrupts are masked while the handler runs. The gate
-should be at privilege level 0 (the most privileged level). The
-@sc{sparc} and 68k stubs are able to mask interrupts themselves without
-help from @code{exceptionHandler}.
-
-@item void flush_i_cache()
-@kindex flush_i_cache
-(sparc and sparclite only) Write this subroutine to flush the
-instruction cache, if any, on your target machine. If there is no
-instruction cache, this subroutine may be a no-op.
-
-On target machines that have instruction caches, @value{GDBN} requires this
-function to make certain that the state of your program is stable.
-@end table
-
-@noindent
-You must also make sure this library routine is available:
-
-@table @code
-@item void *memset(void *, int, int)
-@kindex memset
-This is the standard library function @code{memset} that sets an area of
-memory to a known value. If you have one of the free versions of
-@code{libc.a}, @code{memset} can be found there; otherwise, you must
-either obtain it from your hardware manufacturer, or write your own.
-@end table
-
-If you do not use the GNU C compiler, you may need other standard
-library subroutines as well; this varies from one stub to another,
-but in general the stubs are likely to use any of the common library
-subroutines which @code{gcc} generates as inline code.
-
-
-@node Debug Session
-@subsubsection Putting it all together
-
-@cindex remote serial debugging summary
-In summary, when your program is ready to debug, you must follow these
-steps.
-
-@enumerate
-@item
-Make sure you have the supporting low-level routines
-(@pxref{Bootstrapping,,What you must do for the stub}):
-@display
-@code{getDebugChar}, @code{putDebugChar},
-@code{flush_i_cache}, @code{memset}, @code{exceptionHandler}.
-@end display
-
-@item
-Insert these lines near the top of your program:
-
-@example
-set_debug_traps();
-breakpoint();
-@end example
-
-@item
-For the 680x0 stub only, you need to provide a variable called
-@code{exceptionHook}. Normally you just use:
-
-@example
-void (*exceptionHook)() = 0;
-@end example
-
-but if before calling @code{set_debug_traps}, you set it to point to a
-function in your program, that function is called when
-@code{@value{GDBN}} continues after stopping on a trap (for example, bus
-error). The function indicated by @code{exceptionHook} is called with
-one parameter: an @code{int} which is the exception number.
-
-@item
-Compile and link together: your program, the @value{GDBN} debugging stub for
-your target architecture, and the supporting subroutines.
-
-@item
-Make sure you have a serial connection between your target machine and
-the @value{GDBN} host, and identify the serial port on the host.
-
-@item
-@c The "remote" target now provides a `load' command, so we should
-@c document that. FIXME.
-Download your program to your target machine (or get it there by
-whatever means the manufacturer provides), and start it.
-
-@item
-To start remote debugging, run @value{GDBN} on the host machine, and specify
-as an executable file the program that is running in the remote machine.
-This tells @value{GDBN} how to find your program's symbols and the contents
-of its pure text.
-
-@cindex serial line, @code{target remote}
-Then establish communication using the @code{target remote} command.
-Its argument specifies how to communicate with the target
-machine---either via a devicename attached to a direct serial line, or a
-TCP port (usually to a terminal server which in turn has a serial line
-to the target). For example, to use a serial line connected to the
-device named @file{/dev/ttyb}:
-
-@example
-target remote /dev/ttyb
-@end example
-
-@cindex TCP port, @code{target remote}
-To use a TCP connection, use an argument of the form
-@code{@var{host}:port}. For example, to connect to port 2828 on a
-terminal server named @code{manyfarms}:
-
-@example
-target remote manyfarms:2828
-@end example
-@end enumerate
-
-Now you can use all the usual commands to examine and change data and to
-step and continue the remote program.
-
-To resume the remote program and stop debugging it, use the @code{detach}
-command.
-
-@cindex interrupting remote programs
-@cindex remote programs, interrupting
-Whenever @value{GDBN} is waiting for the remote program, if you type the
-interrupt character (often @key{C-C}), @value{GDBN} attempts to stop the
-program. This may or may not succeed, depending in part on the hardware
-and the serial drivers the remote system uses. If you type the
-interrupt character once again, @value{GDBN} displays this prompt:
-
-@example
-Interrupted while waiting for the program.
-Give up (and stop debugging it)? (y or n)
-@end example
-
-If you type @kbd{y}, @value{GDBN} abandons the remote debugging session.
-(If you decide you want to try again later, you can use @samp{target
-remote} again to connect once more.) If you type @kbd{n}, @value{GDBN}
-goes back to waiting.
-
-@node Protocol
-@subsubsection Communication protocol
-
-@cindex debugging stub, example
-@cindex remote stub, example
-@cindex stub example, remote debugging
-The stub files provided with @value{GDBN} implement the target side of the
-communication protocol, and the @value{GDBN} side is implemented in the
-@value{GDBN} source file @file{remote.c}. Normally, you can simply allow
-these subroutines to communicate, and ignore the details. (If you're
-implementing your own stub file, you can still ignore the details: start
-with one of the existing stub files. @file{sparc-stub.c} is the best
-organized, and therefore the easiest to read.)
-
-However, there may be occasions when you need to know something about
-the protocol---for example, if there is only one serial port to your
-target machine, you might want your program to do something special if
-it recognizes a packet meant for @value{GDBN}.
-
-In the examples below, @samp{<-} and @samp{->} are used to indicate
-transmitted and received data respectfully.
-
-@cindex protocol, @value{GDBN} remote serial
-@cindex serial protocol, @value{GDBN} remote
-@cindex remote serial protocol
-All @value{GDBN} commands and responses (other than acknowledgments)
-are sent as a @var{packet}. A @var{packet} is introduced with the
-character @samp{$}, this is followed by an optional two-digit
-@var{sequence-id} and the character @samp{:}, the actual
-@var{packet-data}, and the terminating character @samp{#} followed by a
-two-digit @var{checksum}:
-
-@example
-@code{$}@var{packet-data}@code{#}@var{checksum}
-@end example
-@noindent
-or, with the optional @var{sequence-id}:
-@example
-@code{$}@var{sequence-id}@code{:}@var{packet-data}@code{#}@var{checksum}
-@end example
-
-@cindex checksum, for @value{GDBN} remote
-@noindent
-The two-digit @var{checksum} is computed as the modulo 256 sum of all
-characters between the leading @samp{$} and the trailing @samp{#} (that
-consisting of both the optional @var{sequence-id}@code{:} and the actual
-@var{packet-data}).
-
-@cindex sequence-id, for @value{GDBN} remote
-@noindent
-The two-digit @var{sequence-id}, when present, is returned with the
-acknowledgment. Beyond that its meaning is poorly defined.
-@value{GDBN} is not known to output @var{sequence-id}s.
-
-When either the host or the target machine receives a packet, the first
-response expected is an acknowledgment: either @samp{+} (to indicate
-the package was received correctly) or @samp{-} (to request
-retransmission):
-
-@example
-<- @code{$}@var{packet-data}@code{#}@var{checksum}
--> @code{+}
-@end example
-@noindent
-If the received packet included a @var{sequence-id} than that is
-appended to a positive acknowledgment:
-
-@example
-<- @code{$}@var{sequence-id}@code{:}@var{packet-data}@code{#}@var{checksum}
--> @code{+}@var{sequence-id}
-@end example
-
-The host (@value{GDBN}) sends @var{command}s, and the target (the
-debugging stub incorporated in your program) sends a @var{response}. In
-the case of step and continue @var{command}s, the response is only sent
-when the operation has completed (the target has again stopped).
-
-@var{packet-data} consists of a sequence of characters with the
-exception of @samp{#} and @samp{$} (see @samp{X} packet for an
-exception). @samp{:} can not appear as the third character in a packet.
-Fields within the packet should be separated using @samp{,} and @samp{;}
-(unfortunately some packets chose to use @samp{:}). Except where
-otherwise noted all numbers are represented in HEX with leading zeros
-suppressed.
-
-Response @var{data} can be run-length encoded to save space. A @samp{*}
-means that the next character is an ASCII encoding giving a repeat count
-which stands for that many repetitions of the character preceding the
-@samp{*}. The encoding is @code{n+29}, yielding a printable character
-where @code{n >=3} (which is where rle starts to win). Don't use an
-@code{n > 126}.
-
-So:
-@example
-"@code{0* }"
-@end example
-@noindent
-means the same as "0000".
-
-The error response, returned for some packets includes a two character
-error number. That number is not well defined.
-
-For any @var{command} not supported by the stub, an empty response
-(@samp{$#00}) should be returned. That way it is possible to extend the
-protocol. A newer @value{GDBN} can tell if a packet is supported based
-on the response.
-
-Below is a complete list of all currently defined @var{command}s and
-their corresponding response @var{data}:
-
-@multitable @columnfractions .30 .30 .40
-@item Packet
-@tab Request
-@tab Description
-
-@item extended ops @emph{(optional)}
-@tab @code{!}
-@tab
-Use the extended remote protocol. Sticky -- only needs to be set once.
-The extended remote protocol support the @samp{R} packet.
-@item
-@tab reply @samp{}
-@tab
-Stubs that support the extended remote protocol return @samp{} which,
-unfortunately, is identical to the response returned by stubs that do not
-support protocol extensions.
-
-@item last signal
-@tab @code{?}
-@tab
-Reply the current reason for stopping. This is the same reply as is
-generated for step or cont : @code{S}@var{AA} where @var{AA} is the
-signal number.
-
-@item reserved
-@tab @code{a}
-@tab Reserved for future use
-
-@item set program arguments @strong{(reserved)} @emph{(optional)}
-@tab @code{A}@var{arglen}@code{,}@var{argnum}@code{,}@var{arg}@code{,...}
-@tab
-Initialized @samp{argv[]} array passed into program. @var{arglen}
-specifies the number of bytes in the hex encoded byte stream @var{arg}.
-@item
-@tab reply @code{OK}
-@item
-@tab reply @code{E}@var{NN}
-
-@item set baud @strong{(deprecated)}
-@tab @code{b}@var{baud}
-@tab
-Change the serial line speed to @var{baud}. JTC: @emph{When does the
-transport layer state change? When it's received, or after the ACK is
-transmitted. In either case, there are problems if the command or the
-acknowledgment packet is dropped.} Stan: @emph{If people really wanted
-to add something like this, and get it working for the first time, they
-ought to modify ser-unix.c to send some kind of out-of-band message to a
-specially-setup stub and have the switch happen "in between" packets, so
-that from remote protocol's point of view, nothing actually
-happened.}
-
-@item set breakpoint @strong{(deprecated)}
-@tab @code{B}@var{addr},@var{mode}
-@tab
-Set (@var{mode} is @samp{S}) or clear (@var{mode} is @samp{C}) a
-breakpoint at @var{addr}. @emph{This has been replaced by the @samp{Z} and
-@samp{z} packets.}
-
-@item continue
-@tab @code{c}@var{addr}
-@tab
-@var{addr} is address to resume. If @var{addr} is omitted, resume at
-current address.
-@item
-@tab reply
-@tab see below
-
-@item continue with signal @emph{(optional)}
-@tab @code{C}@var{sig}@code{;}@var{addr}
-@tab
-Continue with signal @var{sig} (hex signal number). If
-@code{;}@var{addr} is omitted, resume at same address.
-@item
-@tab reply
-@tab see below
-
-@item toggle debug @emph{(optional)}
-@tab @code{d}
-@tab
-toggle debug flag (see 386 & 68k stubs)
-
-@item detach @emph{(optional)}
-@tab @code{D}
-@tab Reply OK.
-
-@item reserved
-@tab @code{e}
-@tab Reserved for future use
-
-@item reserved
-@tab @code{E}
-@tab Reserved for future use
-
-@item reserved
-@tab @code{f}
-@tab Reserved for future use
-
-@item reserved
-@tab @code{F}
-@tab Reserved for future use
-
-@item read registers
-@tab @code{g}
-@tab Read general registers.
-@item
-@tab reply @var{XX...}
-@tab
-Each byte of register data is described by two hex digits. The bytes
-with the register are transmitted in target byte order. The size of
-each register and their position within the @samp{g} @var{packet} is
-determined by the @var{REGISTER_RAW_SIZE} and @var{REGISTER_NAME}
-macros.
-@item
-@tab @code{E}@var{NN}
-@tab for an error.
-
-@item write regs
-@tab @code{G}@var{XX...}
-@tab
-See @samp{g} for a description of the @var{XX...} data.
-@item
-@tab reply @code{OK}
-@tab for success
-@item
-@tab reply @code{E}@var{NN}
-@tab for an error
-
-@item reserved
-@tab @code{h}
-@tab Reserved for future use
-
-@item set thread @emph{(optional)}
-@tab @code{H}@var{c}@var{t...}
-@tab
-Set thread for subsequent operations. @var{c} = @samp{c} for thread
-used in step and continue; @var{t...} can be -1 for all threads.
-@var{c} = @samp{g} for thread used in other operations. If zero, pick a
-thread, any thread.
-@item
-@tab reply @code{OK}
-@tab for success
-@item
-@tab reply @code{E}@var{NN}
-@tab for an error
-
-@item cycle step @strong{(draft)} @emph{(optional)}
-@tab @code{i}@var{addr}@code{,}@var{nnn}
-@tab
-Step the remote target by a single clock cycle. If @code{,}@var{nnn} is
-present, cycle step @var{nnn} cycles. If @var{addr} is present, cycle
-step starting at that address.
-
-@item signal then cycle step @strong{(reserved)} @emph{(optional)}
-@tab @code{I}
-@tab
-See @samp{i} and @samp{S} for likely syntax and semantics.
-
-@item reserved
-@tab @code{j}
-@tab Reserved for future use
-
-@item reserved
-@tab @code{J}
-@tab Reserved for future use
-
-@item kill request @emph{(optional)}
-@tab @code{k}
-@tab
-
-@item reserved
-@tab @code{l}
-@tab Reserved for future use
-
-@item reserved
-@tab @code{L}
-@tab Reserved for future use
-
-@item read memory
-@tab @code{m}@var{addr}@code{,}@var{length}
-@tab
-Read @var{length} bytes of memory starting at address @var{addr}.
-@item
-@tab reply @var{XX...}
-@tab
-@var{XX...} is mem contents. Can be fewer bytes than requested if able to
-read only part of the data.
-@item
-@tab reply @code{E}@var{NN}
-@tab @var{NN} is errno
-
-@item write mem
-@tab @code{M}@var{addr},@var{length}@code{:}@var{XX...}
-@tab
-Write @var{length} bytes of memory starting at address @var{addr}.
-@var{XX...} is the data.
-@item
-@tab reply @code{OK}
-@tab for success
-@item
-@tab reply @code{E}@var{NN}
-@tab
-for an error (this includes the case where only part of the data was
-written).
-
-@item reserved
-@tab @code{n}
-@tab Reserved for future use
-
-@item reserved
-@tab @code{N}
-@tab Reserved for future use
-
-@item reserved
-@tab @code{o}
-@tab Reserved for future use
-
-@item reserved
-@tab @code{O}
-@tab Reserved for future use
-
-@item read reg @strong{(reserved)}
-@tab @code{p}@var{n...}
-@tab
-See write register.
-@item
-@tab return @var{r....}
-@tab The hex encoded value of the register in target byte order.
-
-@item write reg @emph{(optional)}
-@tab @code{P}@var{n...}@code{=}@var{r...}
-@tab
-Write register @var{n...} with value @var{r...}, which contains two hex
-digits for each byte in the register (target byte order).
-@item
-@tab reply @code{OK}
-@tab for success
-@item
-@tab reply @code{E}@var{NN}
-@tab for an error
-
-@item general query @emph{(optional)}
-@tab @code{q}@var{query}
-@tab
-Request info about @var{query}. In general @value{GDBN} @var{query}'s
-have a leading upper case letter. Custom vendor queries should use a
-leading lower case letter and a company prefix, ex: @samp{qfsf.var}.
-@var{query} may optionally be followed by a @samp{,} or @samp{;}
-separated list. Stubs should ensure that they fully match any
-@var{query} name.
-@item
-@tab reply @code{XX...}
-@tab Hex encoded data from query. The reply can not be empty.
-@item
-@tab reply @code{E}@var{NN}
-@tab error reply
-@item
-@tab reply @samp{}
-@tab Indicating an unrecognized @var{query}.
-
-@item current thread
-@tab @code{q}@code{C}
-@tab Return the current thread id.
-@item
-@tab reply @code{QC}@var{pid}
-@tab
-Where @var{pid} is a HEX encoded 16 bit process id.
-@item
-@tab reply *
-@tab Any other reply implies the old pid.
-
-@item compute CRC of memory block
-@tab @code{q}@code{CRC:}@var{addr}@code{,}@var{length}
-@tab
-@item
-@tab reply @code{E}@var{NN}
-@tab An error (such as memory fault)
-@item
-@tab reply @code{C}@var{CRC32}
-@tab A 32 bit cyclic redundancy check of the specified memory region.
-
-@item query @var{LIST} or @var{threadLIST}
-@tab @code{q}@code{L}@var{startflag}@var{threadcount}@var{nextthread}
-@tab
-Obtain thread information from RTOS. @var{startflag} is one hex digit;
-@var{threadcount} is two hex digits; and @var{nextthread} is 16 hex
-digits.
-@item
-@tab reply *
-@tab
-See @code{remote.c:parse_threadlist_response()}.
-
-@item query sect offs
-@tab @code{q}@code{Offsets}
-@tab Get section offsets.
-@item
-@tab reply @code{Text=}@var{xxx}@code{;Data=}@var{yyy}@code{;Bss=}@var{zzz}
-
-@item thread info request
-@tab @code{q}@code{P}@var{mode}@var{threadid}
-@tab
-Returns information on @var{threadid}. Where: @var{mode} is a hex
-encoded 32 bit mode; @var{threadid} is a hex encoded 64 bit thread ID.
-@item
-@tab reply *
-@tab
-See @code{remote.c:remote_unpack_thread_info_response()}.
-
-@item remote command
-@tab @code{q}@code{Rcmd,}@var{COMMAND}
-@tab
-@var{COMMAND} (hex encoded) is passed to the local interpreter for
-execution. Invalid commands should be reported using the output string.
-Before the final result packet, the target may also respond with a
-number of intermediate @code{O}@var{OUTPUT} console output
-packets. @emph{Implementors should note that providing access to a
-stubs's interpreter may have security implications}.
-@item
-@tab reply @code{OK}
-@tab
-A command response with no output.
-@item
-@tab reply @var{OUTPUT}
-@tab
-A command response with the hex encoded output string @var{OUTPUT}.
-@item
-@tab reply @code{E}@var{NN}
-@tab
-Indicate a badly formed request.
-
-@item
-@tab reply @samp{}
-@tab
-When @samp{q}@samp{Rcmd} is not recognized.
-
-@item general set @emph{(optional)}
-@tab @code{Q}@var{var}@code{=}@var{val}
-@tab
-Set value of @var{var} to @var{val}. See @samp{q} for a discussing of
-naming conventions.
-
-@item reset @emph{(optional)}
-@tab r
-@tab reset -- see sparc stub.
-
-@item remote restart @emph{(optional)}
-@tab @code{R}@var{XX}
-@tab
-Restart the remote server. @var{XX} while needed has no clear
-definition.
-
-@item step @emph{(optional)}
-@tab @code{s}@var{addr}
-@tab
-@var{addr} is address to resume. If @var{addr} is omitted, resume at
-same address.
-@item
-@tab reply
-@tab see below
-
-@item step with signal @emph{(optional)}
-@tab @code{S}@var{sig}@code{;}@var{addr}
-@tab
-Like @samp{C} but step not continue.
-@item
-@tab reply
-@tab see below
-
-@item search @emph{(optional)}
-@tab @code{t}@var{addr}@code{:}@var{PP}@code{,}@var{MM}
-@tab
-Search backwards starting at address @var{addr} for a match with pattern
-@var{PP} and mask @var{MM}. @var{PP} and @var{MM} are 4
-bytes. @var{addr} must be at least 3 digits.
-
-@item thread alive @emph{(optional)}
-@tab @code{T}@var{XX}
-@tab Find out if the thread XX is alive.
-@item
-@tab reply @code{OK}
-@tab thread is still alive
-@item
-@tab reply @code{E}@var{NN}
-@tab thread is dead
-
-@item reserved
-@tab @code{u}
-@tab Reserved for future use
-
-@item reserved
-@tab @code{U}
-@tab Reserved for future use
-
-@item reserved
-@tab @code{v}
-@tab Reserved for future use
-
-@item reserved
-@tab @code{V}
-@tab Reserved for future use
-
-@item reserved
-@tab @code{w}
-@tab Reserved for future use
-
-@item reserved
-@tab @code{W}
-@tab Reserved for future use
-
-@item reserved
-@tab @code{x}
-@tab Reserved for future use
-
-@item write mem (binary) @emph{(optional)}
-@tab @code{X}@var{addr}@code{,}@var{length}@var{:}@var{XX...}
-@tab
-@var{addr} is address, @var{length} is number of bytes, @var{XX...} is
-binary data.
-@item
-@tab reply @code{OK}
-@tab for success
-@item
-@tab reply @code{E}@var{NN}
-@tab for an error
-
-@item reserved
-@tab @code{y}
-@tab Reserved for future use
-
-@item reserved
-@tab @code{Y}
-@tab Reserved for future use
-
-@item remove break or watchpoint @strong{(draft)} @emph{(optional)}
-@tab @code{z}@var{t}@code{,}@var{addr}@code{,}@var{length}
-@tab
-See @samp{Z}.
-
-@item insert break or watchpoint @strong{(draft)} @emph{(optional)}
-@tab @code{Z}@var{t}@code{,}@var{addr}@code{,}@var{length}
-@tab
-@var{t} is type: @samp{0} - software breakpoint, @samp{1} - hardware
-breakpoint, @samp{2} - write watchpoint, @samp{3} - read watchpoint,
-@samp{4} - access watchpoint; @var{addr} is address; @var{length} is in
-bytes. For a software breakpoint, @var{length} specifies the size of
-the instruction to be patched. For hardware breakpoints and watchpoints
-@var{length} specifies the memory region to be monitored.
-@item
-@tab reply @code{E}@var{NN}
-@tab for an error
-@item
-@tab reply @code{OK}
-@tab for success
-@item
-@tab @samp{}
-@tab If not supported.
-
-@item reserved
-@tab <other>
-@tab Reserved for future use
-
-@end multitable
-
-In the case of the @samp{C}, @samp{c}, @samp{S} and @samp{s} packets,
-there is no immediate response. The reply, described below, comes when
-the machine stops:
-
-@multitable @columnfractions .4 .6
-
-@item @code{S}@var{AA}
-@tab @var{AA} is the signal number
-
-@item @code{T}@var{AA}@var{n...}@code{:}@var{r...}@code{;}@var{n...}@code{:}@var{r...}@code{;}@var{n...}@code{:}@var{r...}@code{;}
-@tab
-@var{AA} = two hex digit signal number; @var{n...} = register number
-(hex), @var{r...} = target byte ordered register contents, size defined
-by @code{REGISTER_RAW_SIZE}; @var{n...} = @samp{thread}, @var{r...} =
-thread process ID, this is a hex integer; @var{n...} = other string not
-starting with valid hex digit. @value{GDBN} should ignore this
-@var{n...}, @var{r...} pair and go on to the next. This way we can
-extend the protocol.
-
-@item @code{W}@var{AA}
-@tab
-The process exited, and @var{AA} is the exit status. This is only
-applicable for certains sorts of targets.
-
-@item @code{X}@var{AA}
-@tab
-The process terminated with signal @var{AA}.
-
-@item @code{N}@var{AA}@code{;}@var{tttttttt}@code{;}@var{dddddddd}@code{;}@var{bbbbbbbb} @strong{(obsolete)}
-@tab
-@var{AA} = signal number; @var{tttttttt} = address of symbol "_start";
-@var{dddddddd} = base of data section; @var{bbbbbbbb} = base of bss
-section. @emph{Note: only used by Cisco Systems targets. The difference
-between this reply and the "qOffsets" query is that the 'N' packet may
-arrive spontaneously whereas the 'qOffsets' is a query initiated by the
-host debugger.}
-
-@item @code{O}@var{XX...}
-@tab
-@var{XX...} is hex encoding of ASCII data. This can happen at any time
-while the program is running and the debugger should continue to wait
-for 'W', 'T', etc.
-
-@end multitable
-
-Example sequence of a target being re-started. Notice how the restart
-does not get any direct output:
-
-@example
-<- @code{R00}
--> @code{+}
-@emph{target restarts}
-<- @code{?}
--> @code{+}
--> @code{T001:1234123412341234}
-<- @code{+}
-@end example
-
-Example sequence of a target being stepped by a single instruction:
-
-@example
-<- @code{G1445...}
--> @code{+}
-<- @code{s}
--> @code{+}
-@emph{time passes}
--> @code{T001:1234123412341234}
-<- @code{+}
-<- @code{g}
--> @code{+}
--> @code{1455...}
-<- @code{+}
-@end example
-
-@kindex set remotedebug
-@kindex show remotedebug
-@cindex packets, reporting on stdout
-@cindex serial connections, debugging
-If you have trouble with the serial connection, you can use the command
-@code{set remotedebug}. This makes @value{GDBN} report on all packets sent
-back and forth across the serial line to the remote machine. The
-packet-debugging information is printed on the @value{GDBN} standard output
-stream. @code{set remotedebug off} turns it off, and @code{show
-remotedebug} shows you its current state.
-
-@node Server
-@subsubsection Using the @code{gdbserver} program
-
-@kindex gdbserver
-@cindex remote connection without stubs
-@code{gdbserver} is a control program for Unix-like systems, which
-allows you to connect your program with a remote @value{GDBN} via
-@code{target remote}---but without linking in the usual debugging stub.
-
-@code{gdbserver} is not a complete replacement for the debugging stubs,
-because it requires essentially the same operating-system facilities
-that @value{GDBN} itself does. In fact, a system that can run
-@code{gdbserver} to connect to a remote @value{GDBN} could also run
-@value{GDBN} locally! @code{gdbserver} is sometimes useful nevertheless,
-because it is a much smaller program than @value{GDBN} itself. It is
-also easier to port than all of @value{GDBN}, so you may be able to get
-started more quickly on a new system by using @code{gdbserver}.
-Finally, if you develop code for real-time systems, you may find that
-the tradeoffs involved in real-time operation make it more convenient to
-do as much development work as possible on another system, for example
-by cross-compiling. You can use @code{gdbserver} to make a similar
-choice for debugging.
-
-@value{GDBN} and @code{gdbserver} communicate via either a serial line
-or a TCP connection, using the standard @value{GDBN} remote serial
-protocol.
-
-@table @emph
-@item On the target machine,
-you need to have a copy of the program you want to debug.
-@code{gdbserver} does not need your program's symbol table, so you can
-strip the program if necessary to save space. @value{GDBN} on the host
-system does all the symbol handling.
-
-To use the server, you must tell it how to communicate with @value{GDBN};
-the name of your program; and the arguments for your program. The
-syntax is:
-
-@smallexample
-target> gdbserver @var{comm} @var{program} [ @var{args} @dots{} ]
-@end smallexample
-
-@var{comm} is either a device name (to use a serial line) or a TCP
-hostname and portnumber. For example, to debug Emacs with the argument
-@samp{foo.txt} and communicate with @value{GDBN} over the serial port
-@file{/dev/com1}:
-
-@smallexample
-target> gdbserver /dev/com1 emacs foo.txt
-@end smallexample
-
-@code{gdbserver} waits passively for the host @value{GDBN} to communicate
-with it.
-
-To use a TCP connection instead of a serial line:
-
-@smallexample
-target> gdbserver host:2345 emacs foo.txt
-@end smallexample
-
-The only difference from the previous example is the first argument,
-specifying that you are communicating with the host @value{GDBN} via
-TCP. The @samp{host:2345} argument means that @code{gdbserver} is to
-expect a TCP connection from machine @samp{host} to local TCP port 2345.
-(Currently, the @samp{host} part is ignored.) You can choose any number
-you want for the port number as long as it does not conflict with any
-TCP ports already in use on the target system (for example, @code{23} is
-reserved for @code{telnet}).@footnote{If you choose a port number that
-conflicts with another service, @code{gdbserver} prints an error message
-and exits.} You must use the same port number with the host @value{GDBN}
-@code{target remote} command.
-
-@item On the @value{GDBN} host machine,
-you need an unstripped copy of your program, since @value{GDBN} needs
-symbols and debugging information. Start up @value{GDBN} as usual,
-using the name of the local copy of your program as the first argument.
-(You may also need the @w{@samp{--baud}} option if the serial line is
-running at anything other than 9600 bps.) After that, use @code{target
-remote} to establish communications with @code{gdbserver}. Its argument
-is either a device name (usually a serial device, like
-@file{/dev/ttyb}), or a TCP port descriptor in the form
-@code{@var{host}:@var{PORT}}. For example:
-
-@smallexample
-(@value{GDBP}) target remote /dev/ttyb
-@end smallexample
-
-@noindent
-communicates with the server via serial line @file{/dev/ttyb}, and
-
-@smallexample
-(@value{GDBP}) target remote the-target:2345
-@end smallexample
-
-@noindent
-communicates via a TCP connection to port 2345 on host @w{@file{the-target}}.
-For TCP connections, you must start up @code{gdbserver} prior to using
-the @code{target remote} command. Otherwise you may get an error whose
-text depends on the host system, but which usually looks something like
-@samp{Connection refused}.
-@end table
-
-@node NetWare
-@subsubsection Using the @code{gdbserve.nlm} program
-
-@kindex gdbserve.nlm
-@code{gdbserve.nlm} is a control program for NetWare systems, which
-allows you to connect your program with a remote @value{GDBN} via
-@code{target remote}.
-
-@value{GDBN} and @code{gdbserve.nlm} communicate via a serial line,
-using the standard @value{GDBN} remote serial protocol.
-
-@table @emph
-@item On the target machine,
-you need to have a copy of the program you want to debug.
-@code{gdbserve.nlm} does not need your program's symbol table, so you
-can strip the program if necessary to save space. @value{GDBN} on the
-host system does all the symbol handling.
-
-To use the server, you must tell it how to communicate with
-@value{GDBN}; the name of your program; and the arguments for your
-program. The syntax is:
-
-@smallexample
-load gdbserve [ BOARD=@var{board} ] [ PORT=@var{port} ]
- [ BAUD=@var{baud} ] @var{program} [ @var{args} @dots{} ]
-@end smallexample
-
-@var{board} and @var{port} specify the serial line; @var{baud} specifies
-the baud rate used by the connection. @var{port} and @var{node} default
-to 0, @var{baud} defaults to 9600 bps.
-
-For example, to debug Emacs with the argument @samp{foo.txt}and
-communicate with @value{GDBN} over serial port number 2 or board 1
-using a 19200 bps connection:
-
-@smallexample
-load gdbserve BOARD=1 PORT=2 BAUD=19200 emacs foo.txt
-@end smallexample
-
-@item On the @value{GDBN} host machine,
-you need an unstripped copy of your program, since @value{GDBN} needs
-symbols and debugging information. Start up @value{GDBN} as usual,
-using the name of the local copy of your program as the first argument.
-(You may also need the @w{@samp{--baud}} option if the serial line is
-running at anything other than 9600 bps. After that, use @code{target
-remote} to establish communications with @code{gdbserve.nlm}. Its
-argument is a device name (usually a serial device, like
-@file{/dev/ttyb}). For example:
-
-@smallexample
-(@value{GDBP}) target remote /dev/ttyb
-@end smallexample
-
-@noindent
-communications with the server via serial line @file{/dev/ttyb}.
-@end table
-
-@node i960-Nindy Remote
-@subsection @value{GDBN} with a remote i960 (Nindy)
-
-@cindex Nindy
-@cindex i960
-@dfn{Nindy} is a ROM Monitor program for Intel 960 target systems. When
-@value{GDBN} is configured to control a remote Intel 960 using Nindy, you can
-tell @value{GDBN} how to connect to the 960 in several ways:
-
-@itemize @bullet
-@item
-Through command line options specifying serial port, version of the
-Nindy protocol, and communications speed;
-
-@item
-By responding to a prompt on startup;
-
-@item
-By using the @code{target} command at any point during your @value{GDBN}
-session. @xref{Target Commands, ,Commands for managing targets}.
-
-@end itemize
-
-@menu
-* Nindy Startup:: Startup with Nindy
-* Nindy Options:: Options for Nindy
-* Nindy Reset:: Nindy reset command
-@end menu
-
-@node Nindy Startup
-@subsubsection Startup with Nindy
-
-If you simply start @code{@value{GDBP}} without using any command-line
-options, you are prompted for what serial port to use, @emph{before} you
-reach the ordinary @value{GDBN} prompt:
-
-@example
-Attach /dev/ttyNN -- specify NN, or "quit" to quit:
-@end example
-
-@noindent
-Respond to the prompt with whatever suffix (after @samp{/dev/tty})
-identifies the serial port you want to use. You can, if you choose,
-simply start up with no Nindy connection by responding to the prompt
-with an empty line. If you do this and later wish to attach to Nindy,
-use @code{target} (@pxref{Target Commands, ,Commands for managing targets}).
-
-@node Nindy Options
-@subsubsection Options for Nindy
-
-These are the startup options for beginning your @value{GDBN} session with a
-Nindy-960 board attached:
-
-@table @code
-@item -r @var{port}
-Specify the serial port name of a serial interface to be used to connect
-to the target system. This option is only available when @value{GDBN} is
-configured for the Intel 960 target architecture. You may specify
-@var{port} as any of: a full pathname (e.g. @samp{-r /dev/ttya}), a
-device name in @file{/dev} (e.g. @samp{-r ttya}), or simply the unique
-suffix for a specific @code{tty} (e.g. @samp{-r a}).
-
-@item -O
-(An uppercase letter ``O'', not a zero.) Specify that @value{GDBN} should use
-the ``old'' Nindy monitor protocol to connect to the target system.
-This option is only available when @value{GDBN} is configured for the Intel 960
-target architecture.
-
-@quotation
-@emph{Warning:} if you specify @samp{-O}, but are actually trying to
-connect to a target system that expects the newer protocol, the connection
-fails, appearing to be a speed mismatch. @value{GDBN} repeatedly
-attempts to reconnect at several different line speeds. You can abort
-this process with an interrupt.
-@end quotation
-
-@item -brk
-Specify that @value{GDBN} should first send a @code{BREAK} signal to the target
-system, in an attempt to reset it, before connecting to a Nindy target.
-
-@quotation
-@emph{Warning:} Many target systems do not have the hardware that this
-requires; it only works with a few boards.
-@end quotation
-@end table
-
-The standard @samp{-b} option controls the line speed used on the serial
-port.
-
-@c @group
-@node Nindy Reset
-@subsubsection Nindy reset command
-
-@table @code
-@item reset
-@kindex reset
-For a Nindy target, this command sends a ``break'' to the remote target
-system; this is only useful if the target has been equipped with a
-circuit to perform a hard reset (or some other interesting action) when
-a break is detected.
-@end table
-@c @end group
-
-@node UDI29K Remote
-@subsection The UDI protocol for AMD29K
-
-@cindex UDI
-@cindex AMD29K via UDI
-@value{GDBN} supports AMD's UDI (``Universal Debugger Interface'')
-protocol for debugging the a29k processor family. To use this
-configuration with AMD targets running the MiniMON monitor, you need the
-program @code{MONTIP}, available from AMD at no charge. You can also
-use @value{GDBN} with the UDI-conformant a29k simulator program
-@code{ISSTIP}, also available from AMD.
-
-@table @code
-@item target udi @var{keyword}
-@kindex udi
-Select the UDI interface to a remote a29k board or simulator, where
-@var{keyword} is an entry in the AMD configuration file @file{udi_soc}.
-This file contains keyword entries which specify parameters used to
-connect to a29k targets. If the @file{udi_soc} file is not in your
-working directory, you must set the environment variable @samp{UDICONF}
-to its pathname.
-@end table
-
-@node EB29K Remote
-@subsection The EBMON protocol for AMD29K
-
-@cindex EB29K board
-@cindex running 29K programs
-
-AMD distributes a 29K development board meant to fit in a PC, together
-with a DOS-hosted monitor program called @code{EBMON}. As a shorthand
-term, this development system is called the ``EB29K''. To use
-@value{GDBN} from a Unix system to run programs on the EB29K board, you
-must first connect a serial cable between the PC (which hosts the EB29K
-board) and a serial port on the Unix system. In the following, we
-assume you've hooked the cable between the PC's @file{COM1} port and
-@file{/dev/ttya} on the Unix system.
-
-@menu
-* Comms (EB29K):: Communications setup
-* gdb-EB29K:: EB29K cross-debugging
-* Remote Log:: Remote log
-@end menu
-
-@node Comms (EB29K)
-@subsubsection Communications setup
-
-The next step is to set up the PC's port, by doing something like this
-in DOS on the PC:
-
-@example
-C:\> MODE com1:9600,n,8,1,none
-@end example
-
-@noindent
-This example---run on an MS DOS 4.0 system---sets the PC port to 9600
-bps, no parity, eight data bits, one stop bit, and no ``retry'' action;
-you must match the communications parameters when establishing the Unix
-end of the connection as well.
-@c FIXME: Who knows what this "no retry action" crud from the DOS manual may
-@c mean? It's optional; leave it out? ---doc@cygnus.com, 25feb91
-
-To give control of the PC to the Unix side of the serial line, type
-the following at the DOS console:
-
-@example
-C:\> CTTY com1
-@end example
-
-@noindent
-(Later, if you wish to return control to the DOS console, you can use
-the command @code{CTTY con}---but you must send it over the device that
-had control, in our example over the @file{COM1} serial line).
-
-From the Unix host, use a communications program such as @code{tip} or
-@code{cu} to communicate with the PC; for example,
-
-@example
-cu -s 9600 -l /dev/ttya
-@end example
-
-@noindent
-The @code{cu} options shown specify, respectively, the linespeed and the
-serial port to use. If you use @code{tip} instead, your command line
-may look something like the following:
-
-@example
-tip -9600 /dev/ttya
-@end example
-
-@noindent
-Your system may require a different name where we show
-@file{/dev/ttya} as the argument to @code{tip}. The communications
-parameters, including which port to use, are associated with the
-@code{tip} argument in the ``remote'' descriptions file---normally the
-system table @file{/etc/remote}.
-@c FIXME: What if anything needs doing to match the "n,8,1,none" part of
-@c the DOS side's comms setup? cu can support -o (odd
-@c parity), -e (even parity)---apparently no settings for no parity or
-@c for character size. Taken from stty maybe...? John points out tip
-@c can set these as internal variables, eg ~s parity=none; man stty
-@c suggests that it *might* work to stty these options with stdin or
-@c stdout redirected... ---doc@cygnus.com, 25feb91
-
-@kindex EBMON
-Using the @code{tip} or @code{cu} connection, change the DOS working
-directory to the directory containing a copy of your 29K program, then
-start the PC program @code{EBMON} (an EB29K control program supplied
-with your board by AMD). You should see an initial display from
-@code{EBMON} similar to the one that follows, ending with the
-@code{EBMON} prompt @samp{#}---
-
-@example
-C:\> G:
-
-G:\> CD \usr\joe\work29k
-
-G:\USR\JOE\WORK29K> EBMON
-Am29000 PC Coprocessor Board Monitor, version 3.0-18
-Copyright 1990 Advanced Micro Devices, Inc.
-Written by Gibbons and Associates, Inc.
-
-Enter '?' or 'H' for help
-
-PC Coprocessor Type = EB29K
-I/O Base = 0x208
-Memory Base = 0xd0000
-
-Data Memory Size = 2048KB
-Available I-RAM Range = 0x8000 to 0x1fffff
-Available D-RAM Range = 0x80002000 to 0x801fffff
-
-PageSize = 0x400
-Register Stack Size = 0x800
-Memory Stack Size = 0x1800
-
-CPU PRL = 0x3
-Am29027 Available = No
-Byte Write Available = Yes
-
-# ~.
-@end example
-
-Then exit the @code{cu} or @code{tip} program (done in the example by
-typing @code{~.} at the @code{EBMON} prompt). @code{EBMON} keeps
-running, ready for @value{GDBN} to take over.
-
-For this example, we've assumed what is probably the most convenient
-way to make sure the same 29K program is on both the PC and the Unix
-system: a PC/NFS connection that establishes ``drive @code{G:}'' on the
-PC as a file system on the Unix host. If you do not have PC/NFS or
-something similar connecting the two systems, you must arrange some
-other way---perhaps floppy-disk transfer---of getting the 29K program
-from the Unix system to the PC; @value{GDBN} does @emph{not} download it over the
-serial line.
-
-@node gdb-EB29K
-@subsubsection EB29K cross-debugging
-
-Finally, @code{cd} to the directory containing an image of your 29K
-program on the Unix system, and start @value{GDBN}---specifying as argument the
-name of your 29K program:
-
-@example
-cd /usr/joe/work29k
-@value{GDBP} myfoo
-@end example
-
-@need 500
-Now you can use the @code{target} command:
-
-@example
-target amd-eb /dev/ttya 9600 MYFOO
-@c FIXME: test above 'target amd-eb' as spelled, with caps! caps are meant to
-@c emphasize that this is the name as seen by DOS (since I think DOS is
-@c single-minded about case of letters). ---doc@cygnus.com, 25feb91
-@end example
-
-@noindent
-In this example, we've assumed your program is in a file called
-@file{myfoo}. Note that the filename given as the last argument to
-@code{target amd-eb} should be the name of the program as it appears to DOS.
-In our example this is simply @code{MYFOO}, but in general it can include
-a DOS path, and depending on your transfer mechanism may not resemble
-the name on the Unix side.
-
-At this point, you can set any breakpoints you wish; when you are ready
-to see your program run on the 29K board, use the @value{GDBN} command
-@code{run}.
-
-To stop debugging the remote program, use the @value{GDBN} @code{detach}
-command.
-
-To return control of the PC to its console, use @code{tip} or @code{cu}
-once again, after your @value{GDBN} session has concluded, to attach to
-@code{EBMON}. You can then type the command @code{q} to shut down
-@code{EBMON}, returning control to the DOS command-line interpreter.
-Type @code{CTTY con} to return command input to the main DOS console,
-and type @kbd{~.} to leave @code{tip} or @code{cu}.
-
-@node Remote Log
-@subsubsection Remote log
-@kindex eb.log
-@cindex log file for EB29K
-
-The @code{target amd-eb} command creates a file @file{eb.log} in the
-current working directory, to help debug problems with the connection.
-@file{eb.log} records all the output from @code{EBMON}, including echoes
-of the commands sent to it. Running @samp{tail -f} on this file in
-another window often helps to understand trouble with @code{EBMON}, or
-unexpected events on the PC side of the connection.
-
-@node ST2000 Remote
-@subsection @value{GDBN} with a Tandem ST2000
-
-To connect your ST2000 to the host system, see the manufacturer's
-manual. Once the ST2000 is physically attached, you can run:
-
-@example
-target st2000 @var{dev} @var{speed}
-@end example
-
-@noindent
-to establish it as your debugging environment. @var{dev} is normally
-the name of a serial device, such as @file{/dev/ttya}, connected to the
-ST2000 via a serial line. You can instead specify @var{dev} as a TCP
-connection (for example, to a serial line attached via a terminal
-concentrator) using the syntax @code{@var{hostname}:@var{portnumber}}.
-
-The @code{load} and @code{attach} commands are @emph{not} defined for
-this target; you must load your program into the ST2000 as you normally
-would for standalone operation. @value{GDBN} reads debugging information
-(such as symbols) from a separate, debugging version of the program
-available on your host computer.
-@c FIXME!! This is terribly vague; what little content is here is
-@c basically hearsay.
-
-@cindex ST2000 auxiliary commands
-These auxiliary @value{GDBN} commands are available to help you with the ST2000
-environment:
-
-@table @code
-@item st2000 @var{command}
-@kindex st2000 @var{cmd}
-@cindex STDBUG commands (ST2000)
-@cindex commands to STDBUG (ST2000)
-Send a @var{command} to the STDBUG monitor. See the manufacturer's
-manual for available commands.
-
-@item connect
-@cindex connect (to STDBUG)
-Connect the controlling terminal to the STDBUG command monitor. When
-you are done interacting with STDBUG, typing either of two character
-sequences gets you back to the @value{GDBN} command prompt:
-@kbd{@key{RET}~.} (Return, followed by tilde and period) or
-@kbd{@key{RET}~@key{C-d}} (Return, followed by tilde and control-D).
-@end table
-
-@node VxWorks Remote
-@subsection @value{GDBN} and VxWorks
-
-@cindex VxWorks
-
-@value{GDBN} enables developers to spawn and debug tasks running on networked
-VxWorks targets from a Unix host. Already-running tasks spawned from
-the VxWorks shell can also be debugged. @value{GDBN} uses code that runs on
-both the Unix host and on the VxWorks target. The program
-@code{gdb} is installed and executed on the Unix host. (It may be
-installed with the name @code{vxgdb}, to distinguish it from a
-@value{GDBN} for debugging programs on the host itself.)
-
-@table @code
-@item VxWorks-timeout @var{args}
-@kindex vxworks-timeout
-All VxWorks-based targets now support the option @code{vxworks-timeout}.
-This option is set by the user, and @var{args} represents the number of
-seconds @value{GDBN} waits for responses to rpc's. You might use this if
-your VxWorks target is a slow software simulator or is on the far side
-of a thin network line.
-@end table
-
-The following information on connecting to VxWorks was current when
-this manual was produced; newer releases of VxWorks may use revised
-procedures.
-
-@kindex INCLUDE_RDB
-To use @value{GDBN} with VxWorks, you must rebuild your VxWorks kernel
-to include the remote debugging interface routines in the VxWorks
-library @file{rdb.a}. To do this, define @code{INCLUDE_RDB} in the
-VxWorks configuration file @file{configAll.h} and rebuild your VxWorks
-kernel. The resulting kernel contains @file{rdb.a}, and spawns the
-source debugging task @code{tRdbTask} when VxWorks is booted. For more
-information on configuring and remaking VxWorks, see the manufacturer's
-manual.
-@c VxWorks, see the @cite{VxWorks Programmer's Guide}.
-
-Once you have included @file{rdb.a} in your VxWorks system image and set
-your Unix execution search path to find @value{GDBN}, you are ready to
-run @value{GDBN}. From your Unix host, run @code{gdb} (or @code{vxgdb},
-depending on your installation).
-
-@value{GDBN} comes up showing the prompt:
-
-@example
-(vxgdb)
-@end example
-
-@menu
-* VxWorks Connection:: Connecting to VxWorks
-* VxWorks Download:: VxWorks download
-* VxWorks Attach:: Running tasks
-@end menu
-
-@node VxWorks Connection
-@subsubsection Connecting to VxWorks
-
-The @value{GDBN} command @code{target} lets you connect to a VxWorks target on the
-network. To connect to a target whose host name is ``@code{tt}'', type:
-
-@example
-(vxgdb) target vxworks tt
-@end example
-
-@need 750
-@value{GDBN} displays messages like these:
-
-@smallexample
-Attaching remote machine across net...
-Connected to tt.
-@end smallexample
-
-@need 1000
-@value{GDBN} then attempts to read the symbol tables of any object modules
-loaded into the VxWorks target since it was last booted. @value{GDBN} locates
-these files by searching the directories listed in the command search
-path (@pxref{Environment, ,Your program's environment}); if it fails
-to find an object file, it displays a message such as:
-
-@example
-prog.o: No such file or directory.
-@end example
-
-When this happens, add the appropriate directory to the search path with
-the @value{GDBN} command @code{path}, and execute the @code{target}
-command again.
-
-@node VxWorks Download
-@subsubsection VxWorks download
-
-@cindex download to VxWorks
-If you have connected to the VxWorks target and you want to debug an
-object that has not yet been loaded, you can use the @value{GDBN}
-@code{load} command to download a file from Unix to VxWorks
-incrementally. The object file given as an argument to the @code{load}
-command is actually opened twice: first by the VxWorks target in order
-to download the code, then by @value{GDBN} in order to read the symbol
-table. This can lead to problems if the current working directories on
-the two systems differ. If both systems have NFS mounted the same
-filesystems, you can avoid these problems by using absolute paths.
-Otherwise, it is simplest to set the working directory on both systems
-to the directory in which the object file resides, and then to reference
-the file by its name, without any path. For instance, a program
-@file{prog.o} may reside in @file{@var{vxpath}/vw/demo/rdb} in VxWorks
-and in @file{@var{hostpath}/vw/demo/rdb} on the host. To load this
-program, type this on VxWorks:
-
-@example
--> cd "@var{vxpath}/vw/demo/rdb"
-@end example
-v
-Then, in @value{GDBN}, type:
-
-@example
-(vxgdb) cd @var{hostpath}/vw/demo/rdb
-(vxgdb) load prog.o
-@end example
-
-@value{GDBN} displays a response similar to this:
-
-@smallexample
-Reading symbol data from wherever/vw/demo/rdb/prog.o... done.
-@end smallexample
-
-You can also use the @code{load} command to reload an object module
-after editing and recompiling the corresponding source file. Note that
-this makes @value{GDBN} delete all currently-defined breakpoints,
-auto-displays, and convenience variables, and to clear the value
-history. (This is necessary in order to preserve the integrity of
-debugger data structures that reference the target system's symbol
-table.)
-
-@node VxWorks Attach
-@subsubsection Running tasks
-
-@cindex running VxWorks tasks
-You can also attach to an existing task using the @code{attach} command as
-follows:
-
-@example
-(vxgdb) attach @var{task}
-@end example
-
-@noindent
-where @var{task} is the VxWorks hexadecimal task ID. The task can be running
-or suspended when you attach to it. Running tasks are suspended at
-the time of attachment.
-
-@node Sparclet Remote
-@subsection @value{GDBN} and Sparclet
-@cindex Sparclet
-
-@value{GDBN} enables developers to debug tasks running on
-Sparclet targets from a Unix host.
-@value{GDBN} uses code that runs on
-both the Unix host and on the Sparclet target. The program
-@code{gdb} is installed and executed on the Unix host.
-
-@table @code
-@item timeout @var{args}
-@kindex remotetimeout
-@value{GDBN} now supports the option @code{remotetimeout}.
-This option is set by the user, and @var{args} represents the number of
-seconds @value{GDBN} waits for responses.
-@end table
-
-@kindex Compiling
-When compiling for debugging, include the options "-g" to get debug
-information and "-Ttext" to relocate the program to where you wish to
-load it on the target. You may also want to add the options "-n" or
-"-N" in order to reduce the size of the sections.
-
-@example
-sparclet-aout-gcc prog.c -Ttext 0x12010000 -g -o prog -N
-@end example
-
-You can use objdump to verify that the addresses are what you intended.
-
-@example
-sparclet-aout-objdump --headers --syms prog
-@end example
-
-@kindex Running
-Once you have set
-your Unix execution search path to find @value{GDBN}, you are ready to
-run @value{GDBN}. From your Unix host, run @code{gdb}
-(or @code{sparclet-aout-gdb}, depending on your installation).
-
-@value{GDBN} comes up showing the prompt:
-
-@example
-(gdbslet)
-@end example
-
-@menu
-* Sparclet File:: Setting the file to debug
-* Sparclet Connection:: Connecting to Sparclet
-* Sparclet Download:: Sparclet download
-* Sparclet Execution:: Running and debugging
-@end menu
-
-@node Sparclet File
-@subsubsection Setting file to debug
-
-The @value{GDBN} command @code{file} lets you choose with program to debug.
-
-@example
-(gdbslet) file prog
-@end example
-
-@need 1000
-@value{GDBN} then attempts to read the symbol table of @file{prog}.
-@value{GDBN} locates
-the file by searching the directories listed in the command search
-path.
-If the file was compiled with debug information (option "-g"), source
-files will be searched as well.
-@value{GDBN} locates
-the source files by searching the directories listed in the directory search
-path (@pxref{Environment, ,Your program's environment}).
-If it fails
-to find a file, it displays a message such as:
-
-@example
-prog: No such file or directory.
-@end example
-
-When this happens, add the appropriate directories to the search paths with
-the @value{GDBN} commands @code{path} and @code{dir}, and execute the
-@code{target} command again.
-
-@node Sparclet Connection
-@subsubsection Connecting to Sparclet
-
-The @value{GDBN} command @code{target} lets you connect to a Sparclet target.
-To connect to a target on serial port ``@code{ttya}'', type:
-
-@example
-(gdbslet) target sparclet /dev/ttya
-Remote target sparclet connected to /dev/ttya
-main () at ../prog.c:3
-@end example
-
-@need 750
-@value{GDBN} displays messages like these:
-
-@smallexample
-Connected to ttya.
-@end smallexample
-
-@node Sparclet Download
-@subsubsection Sparclet download
-
-@cindex download to Sparclet
-Once connected to the Sparclet target,
-you can use the @value{GDBN}
-@code{load} command to download the file from the host to the target.
-The file name and load offset should be given as arguments to the @code{load}
-command.
-Since the file format is aout, the program must be loaded to the starting
-address. You can use objdump to find out what this value is. The load
-offset is an offset which is added to the VMA (virtual memory address)
-of each of the file's sections.
-For instance, if the program
-@file{prog} was linked to text address 0x1201000, with data at 0x12010160
-and bss at 0x12010170, in @value{GDBN}, type:
-
-@example
-(gdbslet) load prog 0x12010000
-Loading section .text, size 0xdb0 vma 0x12010000
-@end example
-
-If the code is loaded at a different address then what the program was linked
-to, you may need to use the @code{section} and @code{add-symbol-file} commands
-to tell @value{GDBN} where to map the symbol table.
-
-@node Sparclet Execution
-@subsubsection Running and debugging
-
-@cindex running and debugging Sparclet programs
-You can now begin debugging the task using @value{GDBN}'s execution control
-commands, @code{b}, @code{step}, @code{run}, etc. See the @value{GDBN}
-manual for the list of commands.
-
-@example
-(gdbslet) b main
-Breakpoint 1 at 0x12010000: file prog.c, line 3.
-(gdbslet) run
-Starting program: prog
-Breakpoint 1, main (argc=1, argv=0xeffff21c) at prog.c:3
-3 char *symarg = 0;
-(gdbslet) step
-4 char *execarg = "hello!";
-(gdbslet)
-@end example
-
-@node Hitachi Remote
-@subsection @value{GDBN} and Hitachi microprocessors
-@value{GDBN} needs to know these things to talk to your
-Hitachi SH, H8/300, or H8/500:
-
-@enumerate
-@item
-that you want to use @samp{target hms}, the remote debugging interface
-for Hitachi microprocessors, or @samp{target e7000}, the in-circuit
-emulator for the Hitachi SH and the Hitachi 300H. (@samp{target hms} is
-the default when GDB is configured specifically for the Hitachi SH,
-H8/300, or H8/500.)
-
-@item
-what serial device connects your host to your Hitachi board (the first
-serial device available on your host is the default).
-
-@item
-what speed to use over the serial device.
-@end enumerate
-
-@menu
-* Hitachi Boards:: Connecting to Hitachi boards.
-* Hitachi ICE:: Using the E7000 In-Circuit Emulator.
-* Hitachi Special:: Special @value{GDBN} commands for Hitachi micros.
-@end menu
-
-@node Hitachi Boards
-@subsubsection Connecting to Hitachi boards
-
-@c only for Unix hosts
-@kindex device
-@cindex serial device, Hitachi micros
-Use the special @code{@value{GDBP}} command @samp{device @var{port}} if you
-need to explicitly set the serial device. The default @var{port} is the
-first available port on your host. This is only necessary on Unix
-hosts, where it is typically something like @file{/dev/ttya}.
-
-@kindex speed
-@cindex serial line speed, Hitachi micros
-@code{@value{GDBP}} has another special command to set the communications
-speed: @samp{speed @var{bps}}. This command also is only used from Unix
-hosts; on DOS hosts, set the line speed as usual from outside GDB with
-the DOS @kbd{mode} command (for instance, @w{@samp{mode
-com2:9600,n,8,1,p}} for a 9600 bps connection).
-
-The @samp{device} and @samp{speed} commands are available only when you
-use a Unix host to debug your Hitachi microprocessor programs. If you
-use a DOS host,
-@value{GDBN} depends on an auxiliary terminate-and-stay-resident program
-called @code{asynctsr} to communicate with the development board
-through a PC serial port. You must also use the DOS @code{mode} command
-to set up the serial port on the DOS side.
-
-The following sample session illustrates the steps needed to start a
-program under @value{GDBN} control on an H8/300. The example uses a
-sample H8/300 program called @file{t.x}. The procedure is the same for
-the Hitachi SH and the H8/500.
-
-First hook up your development board. In this example, we use a
-board attached to serial port @code{COM2}; if you use a different serial
-port, substitute its name in the argument of the @code{mode} command.
-When you call @code{asynctsr}, the auxiliary comms program used by the
-degugger, you give it just the numeric part of the serial port's name;
-for example, @samp{asyncstr 2} below runs @code{asyncstr} on
-@code{COM2}.
-
-@example
-C:\H8300\TEST> asynctsr 2
-C:\H8300\TEST> mode com2:9600,n,8,1,p
-
-Resident portion of MODE loaded
-
-COM2: 9600, n, 8, 1, p
-
-@end example
-
-@quotation
-@emph{Warning:} We have noticed a bug in PC-NFS that conflicts with
-@code{asynctsr}. If you also run PC-NFS on your DOS host, you may need to
-disable it, or even boot without it, to use @code{asynctsr} to control
-your development board.
-@end quotation
-
-@kindex target hms
-Now that serial communications are set up, and the development board is
-connected, you can start up @value{GDBN}. Call @code{@value{GDBP}} with
-the name of your program as the argument. @code{@value{GDBP}} prompts
-you, as usual, with the prompt @samp{(@value{GDBP})}. Use two special
-commands to begin your debugging session: @samp{target hms} to specify
-cross-debugging to the Hitachi board, and the @code{load} command to
-download your program to the board. @code{load} displays the names of
-the program's sections, and a @samp{*} for each 2K of data downloaded.
-(If you want to refresh @value{GDBN} data on symbols or on the
-executable file without downloading, use the @value{GDBN} commands
-@code{file} or @code{symbol-file}. These commands, and @code{load}
-itself, are described in @ref{Files,,Commands to specify files}.)
-
-@smallexample
-(eg-C:\H8300\TEST) @value{GDBP} t.x
-GDB is free software and you are welcome to distribute copies
- of it under certain conditions; type "show copying" to see
- the conditions.
-There is absolutely no warranty for GDB; type "show warranty"
-for details.
-GDB @value{GDBVN}, Copyright 1992 Free Software Foundation, Inc...
-(gdb) target hms
-Connected to remote H8/300 HMS system.
-(gdb) load t.x
-.text : 0x8000 .. 0xabde ***********
-.data : 0xabde .. 0xad30 *
-.stack : 0xf000 .. 0xf014 *
-@end smallexample
-
-At this point, you're ready to run or debug your program. From here on,
-you can use all the usual @value{GDBN} commands. The @code{break} command
-sets breakpoints; the @code{run} command starts your program;
-@code{print} or @code{x} display data; the @code{continue} command
-resumes execution after stopping at a breakpoint. You can use the
-@code{help} command at any time to find out more about @value{GDBN} commands.
-
-Remember, however, that @emph{operating system} facilities aren't
-available on your development board; for example, if your program hangs,
-you can't send an interrupt---but you can press the @sc{reset} switch!
-
-Use the @sc{reset} button on the development board
-@itemize @bullet
-@item
-to interrupt your program (don't use @kbd{ctl-C} on the DOS host---it has
-no way to pass an interrupt signal to the development board); and
-
-@item
-to return to the @value{GDBN} command prompt after your program finishes
-normally. The communications protocol provides no other way for @value{GDBN}
-to detect program completion.
-@end itemize
-
-In either case, @value{GDBN} sees the effect of a @sc{reset} on the
-development board as a ``normal exit'' of your program.
-
-@node Hitachi ICE
-@subsubsection Using the E7000 in-circuit emulator
-
-@kindex target e7000
-You can use the E7000 in-circuit emulator to develop code for either the
-Hitachi SH or the H8/300H. Use one of these forms of the @samp{target
-e7000} command to connect @value{GDBN} to your E7000:
-
-@table @code
-@item target e7000 @var{port} @var{speed}
-Use this form if your E7000 is connected to a serial port. The
-@var{port} argument identifies what serial port to use (for example,
-@samp{com2}). The third argument is the line speed in bits per second
-(for example, @samp{9600}).
-
-@item target e7000 @var{hostname}
-If your E7000 is installed as a host on a TCP/IP network, you can just
-specify its hostname; @value{GDBN} uses @code{telnet} to connect.
-@end table
-
-@node Hitachi Special
-@subsubsection Special @value{GDBN} commands for Hitachi micros
-
-Some @value{GDBN} commands are available only on the H8/300 or the
-H8/500 configurations:
-
-@table @code
-@kindex set machine
-@kindex show machine
-@item set machine h8300
-@itemx set machine h8300h
-Condition @value{GDBN} for one of the two variants of the H8/300
-architecture with @samp{set machine}. You can use @samp{show machine}
-to check which variant is currently in effect.
-
-@kindex set memory @var{mod}
-@cindex memory models, H8/500
-@item set memory @var{mod}
-@itemx show memory
-Specify which H8/500 memory model (@var{mod}) you are using with
-@samp{set memory}; check which memory model is in effect with @samp{show
-memory}. The accepted values for @var{mod} are @code{small},
-@code{big}, @code{medium}, and @code{compact}.
-@end table
-
-@node MIPS Remote
-@subsection @value{GDBN} and remote MIPS boards
-
-@cindex MIPS boards
-@value{GDBN} can use the MIPS remote debugging protocol to talk to a
-MIPS board attached to a serial line. This is available when
-you configure @value{GDBN} with @samp{--target=mips-idt-ecoff}.
-
-@need 1000
-Use these @value{GDBN} commands to specify the connection to your target board:
-
-@table @code
-@item target mips @var{port}
-@kindex target mips @var{port}
-To run a program on the board, start up @code{@value{GDBP}} with the
-name of your program as the argument. To connect to the board, use the
-command @samp{target mips @var{port}}, where @var{port} is the name of
-the serial port connected to the board. If the program has not already
-been downloaded to the board, you may use the @code{load} command to
-download it. You can then use all the usual @value{GDBN} commands.
-
-For example, this sequence connects to the target board through a serial
-port, and loads and runs a program called @var{prog} through the
-debugger:
-
-@example
-host$ @value{GDBP} @var{prog}
-GDB is free software and @dots{}
-(gdb) target mips /dev/ttyb
-(gdb) load @var{prog}
-(gdb) run
-@end example
-
-@item target mips @var{hostname}:@var{portnumber}
-On some @value{GDBN} host configurations, you can specify a TCP
-connection (for instance, to a serial line managed by a terminal
-concentrator) instead of a serial port, using the syntax
-@samp{@var{hostname}:@var{portnumber}}.
-
-@item target pmon @var{port}
-@kindex target pmon @var{port}
-
-@item target ddb @var{port}
-@kindex target ddb @var{port}
-
-@item target lsi @var{port}
-@kindex target lsi @var{port}
-
-@end table
-
-
-@noindent
-@value{GDBN} also supports these special commands for MIPS targets:
-
-@table @code
-@item set processor @var{args}
-@itemx show processor
-@kindex set processor @var{args}
-@kindex show processor
-Use the @code{set processor} command to set the type of MIPS
-processor when you want to access processor-type-specific registers.
-For example, @code{set processor @var{r3041}} tells @value{GDBN}
-to use the CPO registers appropriate for the 3041 chip.
-Use the @code{show processor} command to see what MIPS processor @value{GDBN}
-is using. Use the @code{info reg} command to see what registers
-@value{GDBN} is using.
-
-@item set mipsfpu double
-@itemx set mipsfpu single
-@itemx set mipsfpu none
-@itemx show mipsfpu
-@kindex set mipsfpu
-@kindex show mipsfpu
-@cindex MIPS remote floating point
-@cindex floating point, MIPS remote
-If your target board does not support the MIPS floating point
-coprocessor, you should use the command @samp{set mipsfpu none} (if you
-need this, you may wish to put the command in your @value{GDBINIT}
-file). This tells @value{GDBN} how to find the return value of
-functions which return floating point values. It also allows
-@value{GDBN} to avoid saving the floating point registers when calling
-functions on the board. If you are using a floating point coprocessor
-with only single precision floating point support, as on the @sc{r4650}
-processor, use the command @samp{set mipsfpu single}. The default
-double precision floating point coprocessor may be selected using
-@samp{set mipsfpu double}.
-
-In previous versions the only choices were double precision or no
-floating point, so @samp{set mipsfpu on} will select double precision
-and @samp{set mipsfpu off} will select no floating point.
-
-As usual, you can inquire about the @code{mipsfpu} variable with
-@samp{show mipsfpu}.
-
-@item set remotedebug @var{n}
-@itemx show remotedebug
-@kindex set remotedebug
-@kindex show remotedebug
-@cindex @code{remotedebug}, MIPS protocol
-@cindex MIPS @code{remotedebug} protocol
-@c FIXME! For this to be useful, you must know something about the MIPS
-@c FIXME...protocol. Where is it described?
-You can see some debugging information about communications with the board
-by setting the @code{remotedebug} variable. If you set it to @code{1} using
-@samp{set remotedebug 1}, every packet is displayed. If you set it
-to @code{2}, every character is displayed. You can check the current value
-at any time with the command @samp{show remotedebug}.
-
-@item set timeout @var{seconds}
-@itemx set retransmit-timeout @var{seconds}
-@itemx show timeout
-@itemx show retransmit-timeout
-@cindex @code{timeout}, MIPS protocol
-@cindex @code{retransmit-timeout}, MIPS protocol
-@kindex set timeout
-@kindex show timeout
-@kindex set retransmit-timeout
-@kindex show retransmit-timeout
-You can control the timeout used while waiting for a packet, in the MIPS
-remote protocol, with the @code{set timeout @var{seconds}} command. The
-default is 5 seconds. Similarly, you can control the timeout used while
-waiting for an acknowledgement of a packet with the @code{set
-retransmit-timeout @var{seconds}} command. The default is 3 seconds.
-You can inspect both values with @code{show timeout} and @code{show
-retransmit-timeout}. (These commands are @emph{only} available when
-@value{GDBN} is configured for @samp{--target=mips-idt-ecoff}.)
-
-The timeout set by @code{set timeout} does not apply when @value{GDBN}
-is waiting for your program to stop. In that case, @value{GDBN} waits
-forever because it has no way of knowing how long the program is going
-to run before stopping.
-@end table
-
-@node Simulator
-@subsection Simulated CPU target
-
-@cindex simulator
-@cindex simulator, Z8000
-@cindex Z8000 simulator
-@cindex simulator, H8/300 or H8/500
-@cindex H8/300 or H8/500 simulator
-@cindex simulator, Hitachi SH
-@cindex Hitachi SH simulator
-@cindex CPU simulator
-For some configurations, @value{GDBN} includes a CPU simulator that you
-can use instead of a hardware CPU to debug your programs.
-Currently, simulators are available for ARM, D10V, D30V, FR30, H8/300,
-H8/500, i960, M32R, MIPS, MN10200, MN10300, PowerPC, SH, Sparc, V850,
-W65, and Z8000.
-
-@cindex simulator, Z8000
-@cindex Zilog Z8000 simulator
-When configured for debugging Zilog Z8000 targets, @value{GDBN} includes
-a Z8000 simulator.
-
-For the Z8000 family, @samp{target sim} simulates either the Z8002 (the
-unsegmented variant of the Z8000 architecture) or the Z8001 (the
-segmented variant). The simulator recognizes which architecture is
-appropriate by inspecting the object code.
-
-@table @code
-@item target sim @var{args}
-@kindex sim
-@kindex target sim
-Debug programs on a simulated CPU. If the simulator supports setup
-options, specify them via @var{args}.
-@end table
-
-@noindent
-After specifying this target, you can debug programs for the simulated
-CPU in the same style as programs for your host computer; use the
-@code{file} command to load a new program image, the @code{run} command
-to run your program, and so on.
-
-As well as making available all the usual machine registers (see
-@code{info reg}), the Z8000 simulator provides three additional items
-of information as specially named registers:
-
-@table @code
-@item cycles
-Counts clock-ticks in the simulator.
-
-@item insts
-Counts instructions run in the simulator.
-
-@item time
-Execution time in 60ths of a second.
-@end table
-
-You can refer to these values in @value{GDBN} expressions with the usual
-conventions; for example, @w{@samp{b fputc if $cycles>5000}} sets a
-conditional breakpoint that suspends only after at least 5000
-simulated clock ticks.
-
-@c need to add much more detail about sims!