Initial creation of sourceware repository

1 files changed, 0 insertions, 355 deletions

diff --git a/gdb/doc/Makefile.in b/gdb/doc/Makefile.in
deleted file mode 100644
index 69241bf..0000000
--- a/gdb/doc/Makefile.in
+++ /dev/null
@@ -1,355 +0,0 @@
-##Copyright (C) 1991, 1992, 1999 Free Software Foundation, Inc.
-
-# Makefile for GDB documentation.
-# This file is part of GDB.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-# 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-
-srcdir = @srcdir@
-VPATH = @srcdir@
-
-prefix = @prefix@
-
-infodir = @infodir@
-
-SHELL = @SHELL@
-
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_DATA = @INSTALL_DATA@
-
-# main GDB source directory
-gdbdir = $(srcdir)/..
-
-# where to find texinfo; GDB dist should include a recent one
-TEXIDIR=${gdbdir}/../texinfo
-
-# where to find makeinfo, preferably one designed for texinfo-2
-MAKEINFO=makeinfo
-
-# where to find texi2roff, ditto
-TEXI2ROFF=texi2roff
-
-# Where is the source dir for the READLINE library doc?  
-# Traditionally readline is in .. or .
-READLINE_DIR = ${gdbdir}/../readline/doc
-
-SET_TEXINPUTS = TEXINPUTS=${TEXIDIR}:.:$(srcdir):$(READLINE_DIR):$$TEXINPUTS
-
-# There may be alternate predefined collections of switches to configure
-# the GDB manual.  Normally this is not done in synch with the software
-# config system, since this choice tends to be independent; most people
-# want a doc config of `all' for a generic manual, regardless of sw config.
-DOC_CONFIG = all
-
-# This list of sed edits will edit the GDB reference card
-# for what fonts and what papersize to use.
-# By default (NO edits applied), the refcard uses:
-#    - Computer Modern (CM) fonts
-#    - US letter paper (8.5x11in)
-# List some of the following files for alternative fonts and paper:
-#  a4rc.sed     use A4 paper (297 x 210 mm)
-#  psrc.sed     use PostScript fonts (Karl Berry short TeX names)
-# lpsrc.sed     use PostScript fonts (full PostScript names in TeX)
-# e.g. for A4, Postscript:  REFEDITS = a4rc.sed psrc.sed
-#      for A4, CM fonts:    REFEDITS = a4rc.sed
-#      for US, PS fonts:    REFEDITS = psrc.sed
-#      for default:
-REFEDITS =
-
-# Don Knuth's TeX formatter
-TEX = tex
-
-# auxiliary program for sorting Texinfo indices
-TEXINDEX = texindex
-
-# Program to generate Postscript files from DVI files.
-DVIPS = dvips
-
-# Main GDB manual's source files
-SFILES_INCLUDED = gdb-cfg.texi $(srcdir)/remote.texi
-
-SFILES_LOCAL = $(srcdir)/gdb.texinfo GDBvn.texi $(SFILES_INCLUDED)
-
-SFILES_DOC = $(SFILES_LOCAL) \
-                $(READLINE_DIR)/rluser.texinfo $(READLINE_DIR)/inc-hist.texi
-
-#### Host, target, and site specific Makefile fragments come in here.
-###
-
-all install:
-
-info: gdb.info gdbint.info stabs.info
-dvi: gdb.dvi gdbint.dvi stabs.dvi refcard.dvi
-ps: gdb.ps gdbint.ps stabs.ps refcard.ps
-all-doc: info dvi ps
-
-install-info: info
-	for i in *.info* ; do \
-		$(INSTALL_DATA) $$i $(infodir)/$$i ; \
-	done
-
-STAGESTUFF = *.info* gdb-all.texi GDBvn.texi *.ps *.dvi
-
-# Copy the object files from a particular stage into a subdirectory.
-stage1: force
-	-mkdir stage1
-	-mv $(STAGESTUFF) stage1
-
-stage2: force
-	-mkdir stage2
-	-mv $(STAGESTUFF) stage2
-
-stage3: force
-	-mkdir stage3
-	-mv $(STAGESTUFF) stage3
-
-against=stage2
-
-comparison: force
-	for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done
-
-de-stage1: force
-	-(cd stage1 ; mv -f * ..)
-	-rmdir stage1
-
-de-stage2: force
-	-(cd stage2 ; mv -f * ..)
-	-rmdir stage2
-
-de-stage3: force
-	-(cd stage3 ; mv -f * ..)
-	-rmdir stage3
-
-# The "least clean" level of cleaning.  Get rid of files which are
-# automatically generated files that are just intermediate files,
-# 
-mostlyclean:
-	rm -f gdb.mm gdb.ms gdb.me links2roff
-	rm -f *.aux *.cp* *.fn* *.ky* *.log *.pg* *.toc *.tp* *.vr*
-	rm -f sedref.dvi sedref.tex tmp.sed
-
-clean: mostlyclean
-	rm -f rluser.texinfo inc-hist.texi gdb-cfg.texi
-
-distclean: clean
-	rm -f Makefile config.status
-
-# GDBvn.texi, the dvi files, the info files, and the postscript files, 
-# are all part of the distribution, so it should not be removed by
-# "clean" or "distclean".  Use maintainer-clean to remove them.
-
-maintainer-clean realclean: distclean
-	rm -f GDBvn.texi *.info* *.dvi *.ps
-
-# GDB QUICK REFERENCE (dvi output)
-refcard.dvi : refcard.tex $(REFEDITS)
-	if [ -z "$(REFEDITS)" ]; then \
-		cp $(srcdir)/refcard.tex sedref.tex ; \
-	else \
-		echo > tmp.sed ; \
-		for f in "$(REFEDITS)" ; do \
-			cat $(srcdir)/$$f >>tmp.sed ; done ; \
-		sed -f tmp.sed $(srcdir)/refcard.tex >sedref.tex ; \
-	fi
-	$(SET_TEXINPUTS) $(TEX) sedref.tex
-	mv sedref.dvi refcard.dvi
-	rm -f sedref.log sedref.tex tmp.sed
-
-refcard.ps : refcard.dvi
-	$(DVIPS) -t landscape -o $@ $?
-
-# File to record current GDB version number (copied from main dir Makefile.in)
-GDBvn.texi : ${gdbdir}/Makefile.in
-	echo "@set GDBVN `sed <$(srcdir)/../Makefile.in -n 's/^VERSION *= *//p'`" > ./GDBvn.new
-	mv GDBvn.new GDBvn.texi
-
-# Updated atomically
-.PRECIOUS: GDBvn.texi
-
-# Choose configuration for GDB manual (normally `all'; normally not tied into
-# `configure' script because most users prefer generic version of manual,
-# not one for their binary config---which may not be specifically
-# defined anyways).
-gdb-cfg.texi: ${srcdir}/${DOC_CONFIG}-cfg.texi
-	ln -s ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi || \
-	ln ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi || \
-	cp ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi
-
-# GDB MANUAL: texinfo source, using @set/@clear/@value/@ifset/@ifclear
-# If your texinfo or makeinfo don't support these, get a new texinfo release
-#
-# The nonsense with GDBvn.texi gets this to run with both Sun and GNU make.
-#   Note that we can *generate* GDBvn.texi, but since we distribute one in the
-#   source directory for the benefit of people who *don't* use this makefile,
-#   VPATH will often tell make not to bother building it, because the one
-#   in the srcdir is up to date.  (if not, then make should build one here).
-
-# GDB MANUAL: TeX dvi file
-gdb.dvi: ${SFILES_DOC}
-	if [ ! -f ./GDBvn.texi ]; then \
-		ln -s $(srcdir)/GDBvn.texi . || \
-		ln $(srcdir)/GDBvn.texi . || \
-		cp $(srcdir)/GDBvn.texi . ; else true; fi
-	$(SET_TEXINPUTS) $(TEX) gdb.texinfo
-	$(SET_TEXINPUTS) $(TEX) gdb.texinfo
-	$(TEXINDEX) gdb.??
-	$(SET_TEXINPUTS) $(TEX) gdb.texinfo
-	rm -f gdb.aux gdb.cp* gdb.fn* gdb.ky* gdb.log gdb.pg* gdb.toc \
-		gdb.tp* gdb.vr*
-
-gdb.ps: gdb.dvi
-	$(DVIPS) -o $@ $?
-
-# GDB MANUAL: info file
-# We're using texinfo2, and older makeinfo's may not be able to
-# cope with all the markup.  
-gdb.info: ${SFILES_DOC}
-	$(MAKEINFO) -I ${READLINE_DIR} -I $(srcdir) -o ./gdb.info gdb.texinfo
-
-# GDB MANUAL: roff translations
-# Try to use a recent texi2roff.  v2 was put on prep in jan91.
-# If you want an index, see texi2roff doc for postprocessing 
-# and add -i to texi2roff invocations below.
-# Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete
-#    corresponding -e lines when later texi2roff's are current)
-# + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs.
-# + @c's deleted explicitly because texi2roff sees texinfo commands in them
-# + @   (that's at-BLANK) not recognized by texi2roff, turned into blank
-# + @alphaenumerate is ridiculously new, turned into @enumerate
-
-# texi2roff doesn't have a notion of include dirs, so we have to fake 
-# it out for gdb manual's include files---but only if not configured
-# in main sourcedir.
-links2roff: $(SFILES_INCLUDED)
-	if [ ! -f gdb.texinfo ]; then \
-		ln -s $(SFILES_INCLUDED) . || \
-		ln $(SFILES_INCLUDED)    . || \
-		cp $(SFILES_INCLUDED)    . ; \
-	fi
-	touch links2roff
-
-#  "Readline" appendices.  Get them also due to lack of includes, 
-# regardless of whether or not configuring in main sourcedir.
-# @ftable removed due to bug in texi2roff-2; if your texi2roff
-# is newer, try just ln or cp
-rluser.texinfo: ${READLINE_DIR}/rluser.texinfo
-		sed -e 's/^@ftable/@table/g' \
-		-e 's/^@end ftable/@end table/g' \
-		${READLINE_DIR}/rluser.texinfo > ./rluser.texinfo
-
-inc-hist.texi: ${READLINE_DIR}/inc-hist.texi
-	ln -s ${READLINE_DIR}/inc-hist.texi . || \
-	ln ${READLINE_DIR}/inc-hist.texi . || \
-	cp ${READLINE_DIR}/inc-hist.texi .
-
-# gdb manual suitable for [gtn]roff -me
-gdb.me: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texi
-	sed -e '/\\input texinfo/d' \
-		-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
-		-e '/^@ifinfo/,/^@end ifinfo/d' \
-		-e '/^@c /d' \
-		-e 's/{.*,,/{/' \
-		-e 's/@ / /g' \
-		-e 's/^@alphaenumerate/@enumerate/g' \
-		-e 's/^@end alphaenumerate/@end enumerate/g' \
-		$(srcdir)/gdb.texinfo | \
-	$(TEXI2ROFF) -me | \
-	sed -e 's/---/\\(em/g' \
-	>gdb.me 
-
-# gdb manual suitable for [gtn]roff -ms
-gdb.ms: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texi
-	sed -e '/\\input texinfo/d' \
-		-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
-		-e '/^@ifinfo/,/^@end ifinfo/d' \
-		-e '/^@c /d' \
-		-e 's/{.*,,/{/' \
-		-e 's/@ / /g' \
-		-e 's/^@alphaenumerate/@enumerate/g' \
-		-e 's/^@end alphaenumerate/@end enumerate/g' \
-		$(srcdir)/gdb.texinfo | \
-	$(TEXI2ROFF) -ms | \
-	sed -e 's/---/\\(em/g' \
-	>gdb.ms 
-
-# gdb manual suitable for [tn]roff -mm
-# '@noindent's removed due to texi2roff-2 mm bug; if yours is newer, 
-#   try leaving them in
-gdb.mm: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texi
-	sed -e '/\\input texinfo/d' \
-		-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
-		-e '/^@ifinfo/,/^@end ifinfo/d' \
-		-e '/^@c /d' \
-		-e 's/{.*,,/{/' \
-		-e '/@noindent/d' \
-		-e 's/@ / /g' \
-		-e 's/^@alphaenumerate/@enumerate/g' \
-		-e 's/^@end alphaenumerate/@end enumerate/g' \
-		$(srcdir)/gdb.texinfo | \
-	$(TEXI2ROFF) -mm | \
-	sed -e 's/---/\\(em/g' \
-	>gdb.mm 
-
-# start-sanitize-gdbtk
-# GDB GUI MANUAL: TeX dvi file
-gdbgui.dvi : gdbgui.texinfo ${SFILES_DOC}
-	$(SET_TEXINPUTS) $(TEX) gdbgui.texinfo
-	$(TEXINDEX) gdbgui.??
-	$(SET_TEXINPUTS) $(TEX) gdbgui.texinfo
-	rm -f gdbgui.aux gdbgui.cp* gdbgui.fn* gdbgui.ky* \
-		gdbgui.log gdbgui.pg* gdbgui.toc gdbgui.tp* gdbgui.vr*
-
-# GDB GUI MANUAL: info file
-gdb-gui: gdbgui.info
-
-gdbgui.info: gdbgui.texinfo ${SFILES_DOC}
-	$(MAKEINFO) -o gdbgui.info $(srcdir)/gdbgui.texinfo
-# end-sanitize-gdbtk
-
-# GDB INTERNALS MANUAL: TeX dvi file
-gdbint.dvi : gdbint.texinfo
-	$(SET_TEXINPUTS) $(TEX) gdbint.texinfo
-	$(TEXINDEX) gdbint.??
-	$(SET_TEXINPUTS) $(TEX) gdbint.texinfo
-	rm -f gdbint.aux gdbint.cp* gdbint.fn* gdbint.ky* \
-		gdbint.log gdbint.pg* gdbint.toc gdbint.tp* gdbint.vr*
-
-gdbint.ps : gdbint.dvi
-	$(DVIPS) -o $@ $?
-
-# GDB INTERNALS MANUAL: info file
-
-gdbint.info: gdbint.texinfo
-	$(MAKEINFO) -o gdbint.info $(srcdir)/gdbint.texinfo
-
-stabs.info: stabs.texinfo
-	$(MAKEINFO) -o stabs.info $(srcdir)/stabs.texinfo
-
-# STABS DOCUMENTATION: TeX dvi file
-stabs.dvi : stabs.texinfo
-	$(SET_TEXINPUTS) $(TEX) stabs.texinfo
-	$(TEXINDEX) stabs.??
-	$(SET_TEXINPUTS) $(TEX) stabs.texinfo
-	rm -f stabs.aux stabs.cp* stabs.fn* stabs.ky* \
-		stabs.log stabs.pg* stabs.toc stabs.tp* stabs.vr*
-
-stabs.ps: stabs.dvi
-	$(DVIPS) -o $@ $?
-
-force:
-
-Makefile: Makefile.in $(host_makefile_frag) $(target_makefile_frag) config.status
-	$(SHELL) ./config.status