Initial creation of sourceware repositorygdb-4_18-branchpoint

1 files changed, 340 insertions, 0 deletions

diff --git a/gdb/doc/Makefile.in b/gdb/doc/Makefile.in
new file mode 100644
index 0000000..4bcd62e
--- /dev/null
+++ b/gdb/doc/Makefile.in
@@ -0,0 +1,340 @@
+##Copyright (C) 1991, 1992, 1999 Free Software Foundation, Inc.
+
+# Makefile for GDB documentation.
+# This file is part of GDB.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+# 
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# 
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+srcdir = @srcdir@
+VPATH = @srcdir@
+
+prefix = @prefix@
+
+infodir = @infodir@
+
+SHELL = @SHELL@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+
+# main GDB source directory
+gdbdir = $(srcdir)/..
+
+# where to find texinfo; GDB dist should include a recent one
+TEXIDIR=${gdbdir}/../texinfo
+
+# where to find makeinfo, preferably one designed for texinfo-2
+MAKEINFO=makeinfo
+
+# where to find texi2roff, ditto
+TEXI2ROFF=texi2roff
+
+# Where is the source dir for the READLINE library doc?  
+# Traditionally readline is in .. or .
+READLINE_DIR = ${gdbdir}/../readline/doc
+
+SET_TEXINPUTS = TEXINPUTS=${TEXIDIR}:.:$(srcdir):$(READLINE_DIR):$$TEXINPUTS
+
+# There may be alternate predefined collections of switches to configure
+# the GDB manual.  Normally this is not done in synch with the software
+# config system, since this choice tends to be independent; most people
+# want a doc config of `all' for a generic manual, regardless of sw config.
+DOC_CONFIG = all
+
+# This list of sed edits will edit the GDB reference card
+# for what fonts and what papersize to use.
+# By default (NO edits applied), the refcard uses:
+#    - Computer Modern (CM) fonts
+#    - US letter paper (8.5x11in)
+# List some of the following files for alternative fonts and paper:
+#  a4rc.sed     use A4 paper (297 x 210 mm)
+#  psrc.sed     use PostScript fonts (Karl Berry short TeX names)
+# lpsrc.sed     use PostScript fonts (full PostScript names in TeX)
+# e.g. for A4, Postscript:  REFEDITS = a4rc.sed psrc.sed
+#      for A4, CM fonts:    REFEDITS = a4rc.sed
+#      for US, PS fonts:    REFEDITS = psrc.sed
+#      for default:
+REFEDITS =
+
+# Don Knuth's TeX formatter
+TEX = tex
+
+# auxiliary program for sorting Texinfo indices
+TEXINDEX = texindex
+
+# Program to generate Postscript files from DVI files.
+DVIPS = dvips
+
+# Main GDB manual's source files
+SFILES_INCLUDED = gdb-cfg.texi $(srcdir)/remote.texi
+
+SFILES_LOCAL = $(srcdir)/gdb.texinfo GDBvn.texi $(SFILES_INCLUDED)
+
+SFILES_DOC = $(SFILES_LOCAL) \
+                $(READLINE_DIR)/rluser.texinfo $(READLINE_DIR)/inc-hist.texi
+
+#### Host, target, and site specific Makefile fragments come in here.
+###
+
+all install:
+
+info: gdb.info gdbint.info stabs.info
+dvi: gdb.dvi gdbint.dvi stabs.dvi refcard.dvi
+ps: gdb.ps gdbint.ps stabs.ps refcard.ps
+all-doc: info dvi ps
+
+install-info: info
+	for i in *.info* ; do \
+		$(INSTALL_DATA) $$i $(infodir)/$$i ; \
+	done
+
+STAGESTUFF = *.info* gdb-all.texi GDBvn.texi *.ps *.dvi
+
+# Copy the object files from a particular stage into a subdirectory.
+stage1: force
+	-mkdir stage1
+	-mv $(STAGESTUFF) stage1
+
+stage2: force
+	-mkdir stage2
+	-mv $(STAGESTUFF) stage2
+
+stage3: force
+	-mkdir stage3
+	-mv $(STAGESTUFF) stage3
+
+against=stage2
+
+comparison: force
+	for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done
+
+de-stage1: force
+	-(cd stage1 ; mv -f * ..)
+	-rmdir stage1
+
+de-stage2: force
+	-(cd stage2 ; mv -f * ..)
+	-rmdir stage2
+
+de-stage3: force
+	-(cd stage3 ; mv -f * ..)
+	-rmdir stage3
+
+# The "least clean" level of cleaning.  Get rid of files which are
+# automatically generated files that are just intermediate files,
+# 
+mostlyclean:
+	rm -f gdb.mm gdb.ms gdb.me links2roff
+	rm -f *.aux *.cp* *.fn* *.ky* *.log *.pg* *.toc *.tp* *.vr*
+	rm -f sedref.dvi sedref.tex tmp.sed
+
+clean: mostlyclean
+	rm -f rluser.texinfo inc-hist.texi gdb-cfg.texi
+
+distclean: clean
+	rm -f Makefile config.status
+
+# GDBvn.texi, the dvi files, the info files, and the postscript files, 
+# are all part of the distribution, so it should not be removed by
+# "clean" or "distclean".  Use maintainer-clean to remove them.
+
+maintainer-clean realclean: distclean
+	rm -f GDBvn.texi *.info* *.dvi *.ps
+
+# GDB QUICK REFERENCE (dvi output)
+refcard.dvi : refcard.tex $(REFEDITS)
+	if [ -z "$(REFEDITS)" ]; then \
+		cp $(srcdir)/refcard.tex sedref.tex ; \
+	else \
+		echo > tmp.sed ; \
+		for f in "$(REFEDITS)" ; do \
+			cat $(srcdir)/$$f >>tmp.sed ; done ; \
+		sed -f tmp.sed $(srcdir)/refcard.tex >sedref.tex ; \
+	fi
+	$(SET_TEXINPUTS) $(TEX) sedref.tex
+	mv sedref.dvi refcard.dvi
+	rm -f sedref.log sedref.tex tmp.sed
+
+refcard.ps : refcard.dvi
+	$(DVIPS) -t landscape -o $@ $?
+
+# File to record current GDB version number (copied from main dir Makefile.in)
+GDBvn.texi : ${gdbdir}/Makefile.in
+	echo "@set GDBVN `sed <$(srcdir)/../Makefile.in -n 's/^VERSION *= *//p'`" > ./GDBvn.new
+	mv GDBvn.new GDBvn.texi
+
+# Updated atomically
+.PRECIOUS: GDBvn.texi
+
+# Choose configuration for GDB manual (normally `all'; normally not tied into
+# `configure' script because most users prefer generic version of manual,
+# not one for their binary config---which may not be specifically
+# defined anyways).
+gdb-cfg.texi: ${srcdir}/${DOC_CONFIG}-cfg.texi
+	ln -s ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi || \
+	ln ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi || \
+	cp ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi
+
+# GDB MANUAL: texinfo source, using @set/@clear/@value/@ifset/@ifclear
+# If your texinfo or makeinfo don't support these, get a new texinfo release
+#
+# The nonsense with GDBvn.texi gets this to run with both Sun and GNU make.
+#   Note that we can *generate* GDBvn.texi, but since we distribute one in the
+#   source directory for the benefit of people who *don't* use this makefile,
+#   VPATH will often tell make not to bother building it, because the one
+#   in the srcdir is up to date.  (if not, then make should build one here).
+
+# GDB MANUAL: TeX dvi file
+gdb.dvi: ${SFILES_DOC}
+	if [ ! -f ./GDBvn.texi ]; then \
+		ln -s $(srcdir)/GDBvn.texi . || \
+		ln $(srcdir)/GDBvn.texi . || \
+		cp $(srcdir)/GDBvn.texi . ; else true; fi
+	$(SET_TEXINPUTS) $(TEX) gdb.texinfo
+	$(SET_TEXINPUTS) $(TEX) gdb.texinfo
+	$(TEXINDEX) gdb.??
+	$(SET_TEXINPUTS) $(TEX) gdb.texinfo
+	rm -f gdb.aux gdb.cp* gdb.fn* gdb.ky* gdb.log gdb.pg* gdb.toc \
+		gdb.tp* gdb.vr*
+
+gdb.ps: gdb.dvi
+	$(DVIPS) -o $@ $?
+
+# GDB MANUAL: info file
+# We're using texinfo2, and older makeinfo's may not be able to
+# cope with all the markup.  
+gdb.info: ${SFILES_DOC}
+	$(MAKEINFO) -I ${READLINE_DIR} -I $(srcdir) -o ./gdb.info gdb.texinfo
+
+# GDB MANUAL: roff translations
+# Try to use a recent texi2roff.  v2 was put on prep in jan91.
+# If you want an index, see texi2roff doc for postprocessing 
+# and add -i to texi2roff invocations below.
+# Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete
+#    corresponding -e lines when later texi2roff's are current)
+# + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs.
+# + @c's deleted explicitly because texi2roff sees texinfo commands in them
+# + @   (that's at-BLANK) not recognized by texi2roff, turned into blank
+# + @alphaenumerate is ridiculously new, turned into @enumerate
+
+# texi2roff doesn't have a notion of include dirs, so we have to fake 
+# it out for gdb manual's include files---but only if not configured
+# in main sourcedir.
+links2roff: $(SFILES_INCLUDED)
+	if [ ! -f gdb.texinfo ]; then \
+		ln -s $(SFILES_INCLUDED) . || \
+		ln $(SFILES_INCLUDED)    . || \
+		cp $(SFILES_INCLUDED)    . ; \
+	fi
+	touch links2roff
+
+#  "Readline" appendices.  Get them also due to lack of includes, 
+# regardless of whether or not configuring in main sourcedir.
+# @ftable removed due to bug in texi2roff-2; if your texi2roff
+# is newer, try just ln or cp
+rluser.texinfo: ${READLINE_DIR}/rluser.texinfo
+		sed -e 's/^@ftable/@table/g' \
+		-e 's/^@end ftable/@end table/g' \
+		${READLINE_DIR}/rluser.texinfo > ./rluser.texinfo
+
+inc-hist.texi: ${READLINE_DIR}/inc-hist.texi
+	ln -s ${READLINE_DIR}/inc-hist.texi . || \
+	ln ${READLINE_DIR}/inc-hist.texi . || \
+	cp ${READLINE_DIR}/inc-hist.texi .
+
+# gdb manual suitable for [gtn]roff -me
+gdb.me: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texi
+	sed -e '/\\input texinfo/d' \
+		-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
+		-e '/^@ifinfo/,/^@end ifinfo/d' \
+		-e '/^@c /d' \
+		-e 's/{.*,,/{/' \
+		-e 's/@ / /g' \
+		-e 's/^@alphaenumerate/@enumerate/g' \
+		-e 's/^@end alphaenumerate/@end enumerate/g' \
+		$(srcdir)/gdb.texinfo | \
+	$(TEXI2ROFF) -me | \
+	sed -e 's/---/\\(em/g' \
+	>gdb.me 
+
+# gdb manual suitable for [gtn]roff -ms
+gdb.ms: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texi
+	sed -e '/\\input texinfo/d' \
+		-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
+		-e '/^@ifinfo/,/^@end ifinfo/d' \
+		-e '/^@c /d' \
+		-e 's/{.*,,/{/' \
+		-e 's/@ / /g' \
+		-e 's/^@alphaenumerate/@enumerate/g' \
+		-e 's/^@end alphaenumerate/@end enumerate/g' \
+		$(srcdir)/gdb.texinfo | \
+	$(TEXI2ROFF) -ms | \
+	sed -e 's/---/\\(em/g' \
+	>gdb.ms 
+
+# gdb manual suitable for [tn]roff -mm
+# '@noindent's removed due to texi2roff-2 mm bug; if yours is newer, 
+#   try leaving them in
+gdb.mm: $(SFILES_LOCAL) links2roff rluser.texinfo inc-hist.texi
+	sed -e '/\\input texinfo/d' \
+		-e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
+		-e '/^@ifinfo/,/^@end ifinfo/d' \
+		-e '/^@c /d' \
+		-e 's/{.*,,/{/' \
+		-e '/@noindent/d' \
+		-e 's/@ / /g' \
+		-e 's/^@alphaenumerate/@enumerate/g' \
+		-e 's/^@end alphaenumerate/@end enumerate/g' \
+		$(srcdir)/gdb.texinfo | \
+	$(TEXI2ROFF) -mm | \
+	sed -e 's/---/\\(em/g' \
+	>gdb.mm 
+
+
+# GDB INTERNALS MANUAL: TeX dvi file
+gdbint.dvi : gdbint.texinfo
+	$(SET_TEXINPUTS) $(TEX) gdbint.texinfo
+	$(TEXINDEX) gdbint.??
+	$(SET_TEXINPUTS) $(TEX) gdbint.texinfo
+	rm -f gdbint.aux gdbint.cp* gdbint.fn* gdbint.ky* \
+		gdbint.log gdbint.pg* gdbint.toc gdbint.tp* gdbint.vr*
+
+gdbint.ps : gdbint.dvi
+	$(DVIPS) -o $@ $?
+
+# GDB INTERNALS MANUAL: info file
+
+gdbint.info: gdbint.texinfo
+	$(MAKEINFO) -o gdbint.info $(srcdir)/gdbint.texinfo
+
+stabs.info: stabs.texinfo
+	$(MAKEINFO) -o stabs.info $(srcdir)/stabs.texinfo
+
+# STABS DOCUMENTATION: TeX dvi file
+stabs.dvi : stabs.texinfo
+	$(SET_TEXINPUTS) $(TEX) stabs.texinfo
+	$(TEXINDEX) stabs.??
+	$(SET_TEXINPUTS) $(TEX) stabs.texinfo
+	rm -f stabs.aux stabs.cp* stabs.fn* stabs.ky* \
+		stabs.log stabs.pg* stabs.toc stabs.tp* stabs.vr*
+
+stabs.ps: stabs.dvi
+	$(DVIPS) -o $@ $?
+
+force:
+
+Makefile: Makefile.in $(host_makefile_frag) $(target_makefile_frag) config.status
+	$(SHELL) ./config.status