Initial creation of sourceware repositorygdb-4_18-branchpoint

1 files changed, 164 insertions, 0 deletions

diff --git a/gdb/dbug-rom.c b/gdb/dbug-rom.c
new file mode 100644
index 0000000..fa9c974
--- /dev/null
+++ b/gdb/dbug-rom.c
@@ -0,0 +1,164 @@
+/* Remote debugging interface to dBUG ROM monitor for GDB, the GNU debugger.
+   Copyright 1996 Free Software Foundation, Inc.
+
+   Written by Stan Shebs of Cygnus Support.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* dBUG is a monitor supplied on various Motorola boards, including
+   m68k, ColdFire, and PowerPC-based designs.  The code here assumes
+   the ColdFire, and (as of 9/25/96) has only been tested with a
+   ColdFire IDP board.  */
+
+#include "defs.h"
+#include "gdbcore.h"
+#include "target.h"
+#include "monitor.h"
+#include "serial.h"
+
+static void dbug_open PARAMS ((char *args, int from_tty));
+
+static void
+dbug_supply_register (regname, regnamelen, val, vallen)
+     char *regname;
+     int regnamelen;
+     char *val;
+     int vallen;
+{
+  int regno;
+
+  if (regnamelen != 2)
+    return;
+
+  switch (regname[0])
+    {
+    case 'S':
+      if (regname[1] != 'R')
+	return;
+      regno = PS_REGNUM;
+      break;
+    case 'P':
+      if (regname[1] != 'C')
+	return;
+      regno = PC_REGNUM;
+      break;
+    case 'D':
+      if (regname[1] < '0' || regname[1] > '7')
+	return;
+      regno = regname[1] - '0' + D0_REGNUM;
+      break;
+    case 'A':
+      if (regname[1] < '0' || regname[1] > '7')
+	return;
+      regno = regname[1] - '0' + A0_REGNUM;
+      break;
+    default:
+      return;
+    }
+
+  monitor_supply_register (regno, val);
+}
+
+/* This array of registers needs to match the indexes used by GDB. The
+   whole reason this exists is because the various ROM monitors use
+   different names than GDB does, and don't support all the registers
+   either. So, typing "info reg sp" becomes an "A7". */
+
+static char *dbug_regnames[NUM_REGS] =
+{
+  "D0", "D1", "D2", "D3", "D4", "D5", "D6", "D7",
+  "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7",
+  "SR", "PC"
+  /* no float registers */
+};
+static struct target_ops dbug_ops;
+static struct monitor_ops dbug_cmds ;
+
+static char *dbug_inits[] = {"\r", NULL};
+
+
+static void 
+init_dbug_cmds(void)
+{
+  dbug_cmds.flags =   MO_CLR_BREAK_USES_ADDR | MO_GETMEM_NEEDS_RANGE | MO_FILL_USES_ADDR;
+  dbug_cmds.init =   dbug_inits;			/* Init strings */
+  dbug_cmds.cont =   "go\r";			/* continue command */
+  dbug_cmds.step =   "step\r";			/* single step */
+  dbug_cmds.stop =   NULL;				/* interrupt command */
+  dbug_cmds.set_break =   "br %x\r";			/* set a breakpoint */
+  dbug_cmds.clr_break =   "br -c %x\r";			/* clear a breakpoint */
+  dbug_cmds.clr_all_break =   "br -c\r";			/* clear all breakpoints */
+  dbug_cmds.fill =   "bf.b %x %x %x";		/* fill (start end val) */
+  dbug_cmds.setmem.cmdb =     "mm.b %x %x\r";		/* setmem.cmdb (addr, value) */
+  dbug_cmds.setmem.cmdw =     "mm.w %x %x\r";		/* setmem.cmdw (addr, value) */
+  dbug_cmds.setmem.cmdl =     "mm.l %x %x\r";		/* setmem.cmdl (addr, value) */
+  dbug_cmds.setmem.cmdll =     NULL;			/* setmem.cmdll (addr, value) */
+  dbug_cmds.setmem.resp_delim =     NULL;			/* setmem.resp_delim */
+  dbug_cmds.setmem.term =     NULL;			/* setmem.term */
+  dbug_cmds.setmem.term_cmd =     NULL;			/* setmem.term_cmd */
+  dbug_cmds.getmem.cmdb =     "md.b %x %x\r";		/* getmem.cmdb (addr, addr2) */
+  dbug_cmds.getmem.cmdw =     "md.w %x %x\r";		/* getmem.cmdw (addr, addr2) */
+  dbug_cmds.getmem.cmdl =     "md.l %x %x\r";		/* getmem.cmdl (addr, addr2) */
+  dbug_cmds.getmem.cmdll =     NULL;			/* getmem.cmdll (addr, addr2) */
+  dbug_cmds.getmem.resp_delim =     ":";			/* getmem.resp_delim */
+  dbug_cmds.getmem.term =     NULL;			/* getmem.term */
+  dbug_cmds.getmem.term_cmd =     NULL;			/* getmem.term_cmd */
+  dbug_cmds.setreg.cmd =     "rm %s %x\r";		/* setreg.cmd (name, value) */
+  dbug_cmds.setreg.resp_delim =     NULL;			/* setreg.resp_delim */
+  dbug_cmds.setreg.term =     NULL;			/* setreg.term */
+  dbug_cmds.setreg.term_cmd =     NULL;			/* setreg.term_cmd */
+  dbug_cmds.getreg.cmd =     "rd %s\r";			/* getreg.cmd (name) */
+  dbug_cmds.getreg.resp_delim =     ":";			/* getreg.resp_delim */
+  dbug_cmds.getreg.term =     NULL;			/* getreg.term */
+  dbug_cmds.getreg.term_cmd =     NULL;			/* getreg.term_cmd */
+  dbug_cmds.dump_registers =   "rd\r";			/* dump_registers */
+  dbug_cmds.register_pattern =   "\\(\\w+\\) +:\\([0-9a-fA-F]+\\b\\)"; /* register_pattern */
+  dbug_cmds.supply_register =   dbug_supply_register;		/* supply_register */
+  dbug_cmds.load_routine =   NULL;				/* load_routine (defaults to SRECs) */
+  dbug_cmds.load =   "dl\r";			/* download command */
+  dbug_cmds.loadresp =   "\n";				/* load response */
+  dbug_cmds.prompt =   "dBUG>";			/* monitor command prompt */
+  dbug_cmds.line_term =   "\r";				/* end-of-line terminator */
+  dbug_cmds.cmd_end =   NULL;				/* optional command terminator */
+  dbug_cmds.target =   &dbug_ops ;			/* target operations */
+  dbug_cmds.stopbits =   SERIAL_1_STOPBITS;		/* number of stop bits */
+  dbug_cmds.regnames =   dbug_regnames;		/* registers names */
+  dbug_cmds.magic =   MONITOR_OPS_MAGIC	;	/* magic */
+} /* init_debug_ops */
+
+static void
+dbug_open(args, from_tty)
+     char *args;
+     int from_tty;
+{
+  monitor_open (args, &dbug_cmds, from_tty);
+}
+
+void
+_initialize_dbug_rom ()
+{
+  init_dbug_cmds() ;
+  init_monitor_ops (&dbug_ops);
+
+  dbug_ops.to_shortname = "dbug";
+  dbug_ops.to_longname = "dBUG monitor";
+  dbug_ops.to_doc = "Debug via the dBUG monitor.\n\
+Specify the serial device it is connected to (e.g. /dev/ttya).";
+  dbug_ops.to_open = dbug_open;
+
+  add_target (&dbug_ops);
+}