Move gnulib to top level

This patch moves the gdb/gnulib subdirectory to the top level.

It adjusts the top-level build system to build gnulib when necessary,
and changes gdb to use this.  However, gdbserver still builds its own
copy of gnulib, just from the new source location.

A small hack was needed to ensure that gnulib is only built when gdb
is enabled.  The Makefile only provides an ordering -- the directory
must be mentioned in configdirs to actually be compiled at all.

Most of the patch is just a "git mv" of gnulib, though a few minor
path adjustments were needed in some files there.

Tested by the buildbot.

ChangeLog
2019-06-14  Tom Tromey  <tom@tromey.com>

	* MAINTAINERS: Add gnulib.
	* gnulib: New directory, move from gdb/gnulib.
	* configure.ac (host_libs): Add gnulib.
	* configure: Rebuild.
	* Makefile.def (host_modules, dependencies): Add gnulib.
	* Makefile.in: Rebuild.

gdb/ChangeLog
2019-06-14  Tom Tromey  <tom@tromey.com>

	* gnulib: Move directory to top-level.
	* configure.ac: Don't configure gnulib.
	* configure: Rebuild.
	* common/common-defs.h: Use new path to gnulib.
	* Makefile.in (GNULIB_BUILDDIR): Now ../gnulib.
	(GNULIB_H): Remove.
	(INCGNU): Look in new gnulib location.
	(HFILES_NO_SRCDIR): Remove gnulib files.
	(SUBDIR, REQUIRED_SUBDIRS): Remove gnulib.
	(generated_files): Remove GNULIB_H.
	($(LIBGNU), all-lib): Remove targets.
	(distclean): Don't mention GNULIB_BUILDDIR.
	($(GNULIB_BUILDDIR)/Makefile): Remove target.

gdb/gdbserver/ChangeLog
2019-06-14  Tom Tromey  <tom@tromey.com>

	* configure.ac: Use new path to gnulib.
	* configure: Rebuild.
	* Makefile.in (INCGNU, $(GNULIB_BUILDDIR)/Makefile): Use new path
	to gnulib.

gnulib/ChangeLog
2019-06-14  Tom Tromey  <tom@tromey.com>

	* update-gnulib.sh: Adjust paths.
	* Makefile.in: Adjust paths.
	* configure.ac: Adjust paths.  Use ACX_LARGEFILE.
	* configure: Rebuild.

1 files changed, 0 insertions, 123 deletions

diff --git a/gdb/configure b/gdb/configure
index ff0971b..361f3cc 100755
--- a/gdb/configure
+++ b/gdb/configure
@@ -757,7 +757,6 @@ MAKEINFO_EXTRA_FLAGS
 MAKEINFOFLAGS
 MAKEINFO
 PACKAGE
-GNULIB_STDINT_H
 CATOBJEXT
 GENCAT
 INSTOBJEXT
@@ -6194,119 +6193,6 @@ else CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
 fi
 
 
-gnulib_extra_configure_args=
-# If large-file support is disabled, make sure gnulib does the same.
-if test "$enable_largefile" = no; then
-gnulib_extra_configure_args="$gnulib_extra_configure_args --disable-largefile"
-fi
-
-# Configure gnulib.  We need to build gnulib under some other
-# directory not "gnulib", to avoid the problem of both GDB and
-# GDBserver wanting to build it in the same directory, when building
-# in the source dir.
-
-  in_src="gnulib"
-  in_build="build-gnulib"
-  in_extra_args="$gnulib_extra_configure_args"
-
-  # Remove --cache-file, --srcdir, and --disable-option-checking arguments
-  # so they do not pile up.
-  ac_sub_configure_args=
-  ac_prev=
-  eval "set x $ac_configure_args"
-  shift
-  for ac_arg
-  do
-    if test -n "$ac_prev"; then
-      ac_prev=
-      continue
-    fi
-    case $ac_arg in
-    -cache-file | --cache-file | --cache-fil | --cache-fi \
-    | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
-      ac_prev=cache_file ;;
-    -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
-    | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* \
-    | --c=*)
-      ;;
-    --config-cache | -C)
-      ;;
-    -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
-      ac_prev=srcdir ;;
-    -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
-      ;;
-    -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
-      ac_prev=prefix ;;
-    -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
-      ;;
-    --disable-option-checking)
-      ;;
-    *)
-      case $ac_arg in
-      *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-      esac
-      as_fn_append ac_sub_configure_args " '$ac_arg'" ;;
-    esac
-  done
-
-  # Always prepend --prefix to ensure using the same prefix
-  # in subdir configurations.
-  ac_arg="--prefix=$prefix"
-  case $ac_arg in
-  *\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
-  esac
-  ac_sub_configure_args="'$ac_arg' $ac_sub_configure_args"
-
-  # Pass --silent
-  if test "$silent" = yes; then
-    ac_sub_configure_args="--silent $ac_sub_configure_args"
-  fi
-
-  # Always prepend --disable-option-checking to silence warnings, since
-  # different subdirs can have different --enable and --with options.
-  ac_sub_configure_args="--disable-option-checking $ac_sub_configure_args"
-
-  ac_popdir=`pwd`
-  ac_dir=$in_build
-
-  ac_msg="=== configuring in $ac_dir (`pwd`/$ac_dir)"
-  $as_echo "$as_me:${as_lineno-$LINENO}: $ac_msg" >&5
-  $as_echo "$ac_msg" >&6
-  as_dir="$ac_dir"; as_fn_mkdir_p
-
-  case $srcdir in
-  [\\/]* | ?:[\\/]* )
-    ac_srcdir=$srcdir/$in_src ;;
-  *) # Relative name.
-    ac_srcdir=../$srcdir/$in_src ;;
-  esac
-
-  cd "$ac_dir"
-
-  ac_sub_configure=$ac_srcdir/configure
-
-  # Make the cache file name correct relative to the subdirectory.
-  case $cache_file in
-  [\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;;
-  *) # Relative name.
-    ac_sub_cache_file=$ac_top_build_prefix$cache_file ;;
-  esac
-
-  if test -n "$in_extra_args"; then
-    # Add the extra args at the end.
-    ac_sub_configure_args="$ac_sub_configure_args $in_extra_args"
-  fi
-
-  { $as_echo "$as_me:${as_lineno-$LINENO}: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5
-$as_echo "$as_me: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;}
-  # The eval makes quoting arguments work.
-  eval "\$SHELL \"\$ac_sub_configure\" $ac_sub_configure_args \
-       --cache-file=\"\$ac_sub_cache_file\" --srcdir=\"\$ac_srcdir\"" ||
-    as_fn_error $? "$ac_sub_configure failed for $ac_dir" "$LINENO" 5
-
-  cd "$ac_popdir"
-
-
 
 CONFIG_OBS=
 CONFIG_DEPS=
@@ -6399,15 +6285,6 @@ if test x"$USE_NLS" = xyes; then
    CONFIG_UNINSTALL="$CONFIG_UNINSTALL uninstall-po"
 fi
 
-GNULIB=build-gnulib/import
-
-# For Makefile dependencies.
-GNULIB_STDINT_H=
-if test x"$STDINT_H" != x; then
-  GNULIB_STDINT_H=$GNULIB/$STDINT_H
-fi
-
-
 PACKAGE=gdb
 
 cat >>confdefs.h <<_ACEOF