2003-08-30 Michael Chastain <mec@shout.net>

	* Makefile.in: Remove tm-hp300bsd.h, tm-hp300hpux.h.
	* config/m68k/nm-hp300hpux.h: Delete.
	* config/m68k/tm-hp300hpux.h: Delete.
	* config/m68k/xm-hp300hpux.h: Delete.
	* config/m68k/xm-hp300bsd.h: Delete.
	* config/djgpp/fnchange.lst: Remove nm-hp300hpux.h,
	tm-hp300hpux.h, xm-hp300hpux.h.
	* somsolib.c: Remove comment about hp300 shared libraries.

5 files changed, 0 insertions, 324 deletions

diff --git a/gdb/config/djgpp/fnchange.lst b/gdb/config/djgpp/fnchange.lst
index 3c18440..f57c605 100644
--- a/gdb/config/djgpp/fnchange.lst
+++ b/gdb/config/djgpp/fnchange.lst
@@ -100,10 +100,7 @@
 @V@/gdb/config/i386/xm-i386v4.h @V@/gdb/config/i386/xm-v4.h
 @V@/gdb/config/m68k/apollo68v.mh @V@/gdb/config/m68k/apollo-v.mh
 @V@/gdb/config/m68k/nm-apollo68v.h @V@/gdb/config/m68k/nm-apolv.h
-@V@/gdb/config/m68k/nm-hp300hpux.h @V@/gdb/config/m68k/nm-300ux.h
-@V@/gdb/config/m68k/tm-hp300hpux.h @V@/gdb/config/m68k/tm-300ux.h
 @V@/gdb/config/m68k/xm-apollo68v.h @V@/gdb/config/m68k/xm-apolv.h
-@V@/gdb/config/m68k/xm-hp300hpux.h @V@/gdb/config/m68k/xm-300ux.h
 @V@/gdb/config/m88k/tm-delta88v4.h @V@/gdb/config/m88k/tm-d88v4.h
 @V@/gdb/config/m88k/xm-delta88v4.h @V@/gdb/config/m88k/xm-d88v4.h
 @V@/gdb/config/mips/tm-bigmips64.h @V@/gdb/config/mips/tm-bigm64.h
diff --git a/gdb/config/m68k/nm-hp300hpux.h b/gdb/config/m68k/nm-hp300hpux.h
deleted file mode 100644
index b954758..0000000
--- a/gdb/config/m68k/nm-hp300hpux.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/* Parameters for native support on HP 9000 model 320, for GDB, the GNU debugger.
-   Copyright 1986, 1987, 1989, 1992, 1993, 1996
-   Free Software Foundation, Inc.
-
-   This file is part of GDB.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-/* Do implement the attach and detach commands.  */
-
-#define ATTACH_DETACH
-
-/* fetch_inferior_registers is in nat-hp300hpux.c.  */
-#define FETCH_INFERIOR_REGISTERS
-
-/* Get registers from a core file.  The floating point stuff is just
-   guesses.  */
-#define NEED_SYS_CORE_H
-#define REGISTER_U_ADDR(addr, blockend, regno)				\
-{									\
-  if (regno < PS_REGNUM)						\
-    addr = (int) (&((struct proc_regs *)(blockend))->d0 + regno);	\
-  else if (regno == PS_REGNUM)						\
-    addr = (int) ((char *) (&((struct proc_regs *)(blockend))->ps) - 2); \
-  else if (regno == PC_REGNUM)						\
-    addr = (int) &((struct proc_regs *)(blockend))->pc;			\
-  else if (regno < FPC_REGNUM)						\
-    addr = (int) (((struct proc_regs *)(blockend))->mc68881		\
-		  + ((regno) - FP0_REGNUM) / 2);			\
-  else									\
-    addr = (int) (((struct proc_regs *)(blockend))->p_float		\
-		  + (regno) - FPC_REGNUM);				\
-}
-
-/* HPUX 8.0, in its infinite wisdom, has chosen to prototype ptrace
-   with five arguments, so programs written for normal ptrace lose.
-
-   Idiots.
-
-   (They should have just made it varadic).  */
-
-#define FIVE_ARG_PTRACE
diff --git a/gdb/config/m68k/tm-hp300hpux.h b/gdb/config/m68k/tm-hp300hpux.h
deleted file mode 100644
index 8606532..0000000
--- a/gdb/config/m68k/tm-hp300hpux.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* Parameters for execution on an HP 9000 model 320, for GDB, the GNU debugger.
-   Copyright 1986, 1987, 1989, 1991, 1992, 1993
-   Free Software Foundation, Inc.
-
-   This file is part of GDB.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-/* GCC is the only compiler used for stabs on this OS.  So get this
-   right even if the code which detects gcc2_compiled. is still
-   broken.  */
-
-#define BELIEVE_PCC_PROMOTION 1
-
-/* Define BPT_VECTOR if it is different than the default.
-   This is the vector number used by traps to indicate a breakpoint. */
-
-#define BPT_VECTOR 0x1
-
-#include "m68k/tm-m68k.h"
diff --git a/gdb/config/m68k/xm-hp300bsd.h b/gdb/config/m68k/xm-hp300bsd.h
deleted file mode 100644
index b938353..0000000
--- a/gdb/config/m68k/xm-hp300bsd.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/* Parameters for hosting on a Hewlett-Packard 9000/300, running bsd.
-   Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1995, 1996, 2000, 2001
-   Free Software Foundation, Inc.
-
-   This file is part of GDB.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-/*
- * Configuration file for HP9000/300 series machine running
- * University of Utah's 4.3bsd (or 4.4BSD) port.  This is NOT for HP-UX.
- * Problems to hpbsd-bugs@cs.utah.edu
- */
-
-#include <sys/param.h>		/* For INT_MIN */
-
-/* Kernel is a bit tenacious about sharing text segments, disallowing bpts.  */
-#define	ONE_PROCESS_WRITETEXT
-
-/* Interface definitions for kernel debugger KDB.  */
-
-/* Map machine fault codes into signal numbers.
-   First subtract 0, divide by 4, then index in a table.
-   Faults for which the entry in this table is 0
-   are not handled by KDB; the program's own trap handler
-   gets to handle then.  */
-
-#define FAULT_CODE_ORIGIN 0
-#define FAULT_CODE_UNITS 4
-#define FAULT_TABLE    \
-{ 0, 0, 0, 0, SIGTRAP, 0, 0, 0, \
-  0, SIGTRAP, 0, 0, 0, 0, 0, SIGKILL, \
-  0, 0, 0, 0, 0, 0, 0, 0, \
-  SIGILL }
-
-/* Start running with a stack stretching from BEG to END.
-   BEG and END should be symbols meaningful to the assembler.
-   This is used only for kdb.  */
-
-#define INIT_STACK(beg, end)  \
-{ asm (".globl end");         \
-  asm ("movel #end, sp");      \
-  asm ("movel #0,a6"); }
-
-/* Push the frame pointer register on the stack.  */
-#define PUSH_FRAME_PTR        \
-  asm ("movel a6,sp@-");
-
-/* Copy the top-of-stack to the frame pointer register.  */
-#define POP_FRAME_PTR  \
-  asm ("movl sp@,a6");
-
-/* After KDB is entered by a fault, push all registers
-   that GDB thinks about (all NUM_REGS of them),
-   so that they appear in order of ascending GDB register number.
-   The fault code will be on the stack beyond the last register.  */
-
-#define PUSH_REGISTERS        \
-{ asm ("clrw -(sp)");	      \
-  asm ("pea sp@(10)");	      \
-  asm ("movem #0xfffe,sp@-"); }
-
-/* Assuming the registers (including processor status) have been
-   pushed on the stack in order of ascending GDB register number,
-   restore them and return to the address in the saved PC register.  */
-
-#define POP_REGISTERS          \
-{ asm ("subil #8,sp@(28)");     \
-  asm ("movem sp@,#0xffff"); \
-  asm ("rte"); }
diff --git a/gdb/config/m68k/xm-hp300hpux.h b/gdb/config/m68k/xm-hp300hpux.h
deleted file mode 100644
index f5982b4..0000000
--- a/gdb/config/m68k/xm-hp300hpux.h
+++ /dev/null
@@ -1,150 +0,0 @@
-/* Parameters for HP 9000 model 320 hosting, for GDB, the GNU debugger.
-   Copyright 1986, 1987, 1989, 1992, 1993, 1994, 1995, 1996
-   Free Software Foundation, Inc.
-
-   This file is part of GDB.
-
-   This program is free software; you can redistribute it and/or modify
-   it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2 of the License, or
-   (at your option) any later version.
-
-   This program is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-   GNU General Public License for more details.
-
-   You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 59 Temple Place - Suite 330,
-   Boston, MA 02111-1307, USA.  */
-
-/* Define this to indicate problems with traps after continuing.  */
-#define HP_OS_BUG
-
-/* Set flag to indicate whether HP's assembler is in use. */
-#ifdef __GNUC__
-#ifdef __HPUX_ASM__
-#define HPUX_ASM
-#endif
-#else /* not GNU C.  */
-#define HPUX_ASM
-#endif /* not GNU C.  */
-
-/* Define this for versions of hp-ux older than 6.0 */
-/* #define HPUX_VERSION_5 */
-
-/* define USG if you are using sys5 /usr/include's */
-#undef USG			/* In case it was defined in the Makefile for cplus-dem.c */
-#define USG
-
-#define HAVE_TERMIOS
-
-#define REGISTER_ADDR(u_ar0, regno)					\
-  (unsigned int)							\
-  (((regno) < PS_REGNUM)						\
-   ? (&((struct exception_stack *) (u_ar0))->e_regs[(regno + R0)])	\
-   : (((regno) == PS_REGNUM)						\
-      ? ((int *) (&((struct exception_stack *) (u_ar0))->e_PS))		\
-      : (&((struct exception_stack *) (u_ar0))->e_PC)))
-
-#define FP_REGISTER_ADDR(u, regno)					\
-  (((char *)								\
-    (((regno) < FPC_REGNUM)						\
-     ? (&u.u_pcb.pcb_mc68881[FMC68881_R0 + (((regno) - FP0_REGNUM) * 3)]) \
-     : (&u.u_pcb.pcb_mc68881[FMC68881_C + ((regno) - FPC_REGNUM)])))	\
-   - ((char *) (& u)))
-
-/* Interface definitions for kernel debugger KDB.  */
-
-/* Map machine fault codes into signal numbers.
-   First subtract 0, divide by 4, then index in a table.
-   Faults for which the entry in this table is 0
-   are not handled by KDB; the program's own trap handler
-   gets to handle then.  */
-
-#define FAULT_CODE_ORIGIN 0
-#define FAULT_CODE_UNITS 4
-#define FAULT_TABLE    \
-{ 0, 0, 0, 0, SIGTRAP, 0, 0, 0, \
-  0, SIGTRAP, 0, 0, 0, 0, 0, SIGKILL, \
-  0, 0, 0, 0, 0, 0, 0, 0, \
-  SIGILL }
-
-#ifndef HPUX_ASM
-
-/* Start running with a stack stretching from BEG to END.
-   BEG and END should be symbols meaningful to the assembler.
-   This is used only for kdb.  */
-
-#define INIT_STACK(beg, end)  \
-{ asm (".globl end");         \
-  asm ("movel $ end, sp");      \
-  asm ("clrl fp"); }
-
-/* Push the frame pointer register on the stack.  */
-#define PUSH_FRAME_PTR        \
-  asm ("movel fp, -(sp)");
-
-/* Copy the top-of-stack to the frame pointer register.  */
-#define POP_FRAME_PTR  \
-  asm ("movl (sp), fp");
-
-/* After KDB is entered by a fault, push all registers
-   that GDB thinks about (all NUM_REGS of them),
-   so that they appear in order of ascending GDB register number.
-   The fault code will be on the stack beyond the last register.  */
-
-#define PUSH_REGISTERS        \
-{ asm ("clrw -(sp)");	      \
-  asm ("pea 10(sp)");	      \
-  asm ("movem $ 0xfffe,-(sp)"); }
-
-/* Assuming the registers (including processor status) have been
-   pushed on the stack in order of ascending GDB register number,
-   restore them and return to the address in the saved PC register.  */
-
-#define POP_REGISTERS          \
-{ asm ("subil $8,28(sp)");     \
-  asm ("movem (sp),$ 0xffff"); \
-  asm ("rte"); }
-
-#else /* HPUX_ASM */
-
-/* Start running with a stack stretching from BEG to END.
-   BEG and END should be symbols meaningful to the assembler.
-   This is used only for kdb.  */
-
-#define INIT_STACK(beg, end)						\
-{ asm ("global end");							\
-  asm ("mov.l &end,%sp");						\
-  asm ("clr.l %a6"); }
-
-/* Push the frame pointer register on the stack.  */
-#define PUSH_FRAME_PTR							\
-  asm ("mov.l %fp,-(%sp)");
-
-/* Copy the top-of-stack to the frame pointer register.  */
-#define POP_FRAME_PTR							\
-  asm ("mov.l (%sp),%fp");
-
-/* After KDB is entered by a fault, push all registers
-   that GDB thinks about (all NUM_REGS of them),
-   so that they appear in order of ascending GDB register number.
-   The fault code will be on the stack beyond the last register.  */
-
-#define PUSH_REGISTERS							\
-{ asm ("clr.w -(%sp)");							\
-  asm ("pea 10(%sp)");							\
-  asm ("movm.l &0xfffe,-(%sp)"); }
-
-/* Assuming the registers (including processor status) have been
-   pushed on the stack in order of ascending GDB register number,
-   restore them and return to the address in the saved PC register.  */
-
-#define POP_REGISTERS							\
-{ asm ("subi.l &8,28(%sp)");						\
-  asm ("mov.m (%sp),&0xffff");						\
-  asm ("rte"); }
-
-#endif /* HPUX_ASM */