Initial creation of sourceware repositorygdb-4_18-branchpoint

7 files changed, 616 insertions, 0 deletions

diff --git a/gdb/config/i960/mon960.mt b/gdb/config/i960/mon960.mt
new file mode 100644
index 0000000..6cd7345
--- /dev/null
+++ b/gdb/config/i960/mon960.mt
@@ -0,0 +1,6 @@
+# Target: Intel 960 rom monitor
+TDEPFILES= i960-tdep.o monitor.o mon960-rom.o ttyflush.o xmodem.o dsrec.o
+TM_FILE= tm-mon960.h
+SIM_OBS = remote-sim.o
+SIM = ../sim/i960/libsim.a
+
diff --git a/gdb/config/i960/nindy960.mt b/gdb/config/i960/nindy960.mt
new file mode 100644
index 0000000..f37c1da
--- /dev/null
+++ b/gdb/config/i960/nindy960.mt
@@ -0,0 +1,3 @@
+# Target: Intel 80960, in an embedded system under the NINDY monitor
+TDEPFILES= i960-tdep.o nindy-tdep.o remote-nindy.o nindy.o Onindy.o ttyflush.o
+TM_FILE= tm-nindy960.h
diff --git a/gdb/config/i960/tm-i960.h b/gdb/config/i960/tm-i960.h
new file mode 100644
index 0000000..a6d93b0
--- /dev/null
+++ b/gdb/config/i960/tm-i960.h
@@ -0,0 +1,372 @@
+/* Parameters for target machine Intel 960, for GDB, the GNU debugger.
+   Copyright (C) 1990, 1991, 1993 Free Software Foundation, Inc.
+   Contributed by Intel Corporation.
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Definitions to target GDB to any i960.  */
+
+#ifndef I80960
+#define I80960
+#endif
+
+/* Hook for the SYMBOL_CLASS of a parameter when decoding DBX symbol
+   information.  In the i960, parameters can be stored as locals or as
+   args, depending on the type of the debug record.
+
+   From empirical observation, gcc960 uses N_LSYM to indicate
+   arguments passed in registers and then copied immediately
+   to the frame, and N_PSYM to indicate arguments passed in a
+   g14-relative argument block.  */
+
+#define	DBX_PARM_SYMBOL_CLASS(type) ((type == N_LSYM)? LOC_LOCAL_ARG: LOC_ARG)
+
+/* Byte order is configurable, but this machine runs little-endian.  */
+#define	TARGET_BYTE_ORDER	LITTLE_ENDIAN
+
+/* We have IEEE floating point, if we have any float at all.  */
+
+#define IEEE_FLOAT
+
+/* Offset from address of function to start of its code.
+   Zero on most machines.  */
+
+#define FUNCTION_START_OFFSET 0
+
+/* Advance ip across any function entry prologue instructions
+   to reach some "real" code.  */
+
+#define SKIP_PROLOGUE(ip)	{ ip = skip_prologue (ip); }
+extern CORE_ADDR skip_prologue ();
+
+/* Immediately after a function call, return the saved ip.
+   Can't always go through the frames for this because on some machines
+   the new frame is not set up until the new function
+   executes some instructions.  */
+
+#define SAVED_PC_AFTER_CALL(frame) (saved_pc_after_call (frame))
+extern CORE_ADDR saved_pc_after_call ();
+
+/* Stack grows upward */
+
+#define INNER_THAN(lhs,rhs) ((lhs) > (rhs))
+
+/* Say how long (ordinary) registers are.  This is a piece of bogosity
+   used in push_word and a few other places; REGISTER_RAW_SIZE is the
+   real way to know how big a register is.  */
+
+#define REGISTER_SIZE 4
+
+/* Number of machine registers */
+#define NUM_REGS 40
+
+/* Initializer for an array of names of registers.
+   There should be NUM_REGS strings in this initializer.  */
+
+#define REGISTER_NAMES { \
+	/*  0 */ "pfp", "sp",  "rip", "r3",  "r4",  "r5",  "r6",  "r7", \
+	/*  8 */ "r8",  "r9",  "r10", "r11", "r12", "r13", "r14", "r15",\
+	/* 16 */ "g0",  "g1",  "g2",  "g3",  "g4",  "g5",  "g6",  "g7", \
+	/* 24 */ "g8",  "g9",  "g10", "g11", "g12", "g13", "g14", "fp", \
+	/* 32 */ "pcw", "ac",  "tc",  "ip",  "fp0", "fp1", "fp2", "fp3",\
+}
+
+/* Register numbers of various important registers (used to index
+   into arrays of register names and register values).  */
+
+#define R0_REGNUM   0	/* First local register		*/
+#define SP_REGNUM   1	/* Contains address of top of stack */
+#define RIP_REGNUM  2	/* Return instruction pointer (local r2) */
+#define R15_REGNUM 15	/* Last local register		*/
+#define G0_REGNUM  16	/* First global register	*/
+#define G13_REGNUM 29	/* g13 - holds struct return address */
+#define G14_REGNUM 30	/* g14 - ptr to arg block / leafproc return address */
+#define FP_REGNUM  31	/* Contains address of executing stack frame */
+#define	PCW_REGNUM 32	/* process control word */
+#define	ACW_REGNUM 33	/* arithmetic control word */
+#define	TCW_REGNUM 34	/* trace control word */
+#define IP_REGNUM  35	/* instruction pointer */
+#define FP0_REGNUM 36	/* First floating point register */
+
+/* Some registers have more than one name */
+
+#define PC_REGNUM  IP_REGNUM	/* GDB refers to ip as the Program Counter */
+#define PFP_REGNUM R0_REGNUM	/* Previous frame pointer	*/
+
+/* Total amount of space needed to store our copies of the machine's
+   register state, the array `registers'.  */
+#define REGISTER_BYTES ((36*4) + (4*10))
+
+/* Index within `registers' of the first byte of the space for register N.  */
+
+#define REGISTER_BYTE(N) ( (N) < FP0_REGNUM ? \
+				(4*(N)) : ((10*(N)) - (6*FP0_REGNUM)) )
+
+/* The i960 has register windows, sort of.  */
+
+#define HAVE_REGISTER_WINDOWS
+
+/* Is this register part of the register window system?  A yes answer
+   implies that 1) The name of this register will not be the same in
+   other frames, and 2) This register is automatically "saved" upon
+   subroutine calls and thus there is no need to search more than one
+   stack frame for it.
+   
+   On the i960, in fact, the name of this register in another frame is
+   "mud" -- there is no overlap between the windows.  Each window is
+   simply saved into the stack (true for our purposes, after having been
+   flushed; normally they reside on-chip and are restored from on-chip
+   without ever going to memory).  */
+
+#define REGISTER_IN_WINDOW_P(regnum)	((regnum) <= R15_REGNUM)
+
+/* Number of bytes of storage in the actual machine representation
+   for register N.  On the i960, all regs are 4 bytes except for floating
+   point, which are 10.  NINDY only sends us 8 byte values for these,
+   which is a pain, but VxWorks handles this correctly, so we must.  */
+
+#define REGISTER_RAW_SIZE(N)		( (N) < FP0_REGNUM ? 4 : 10 )
+
+/* Number of bytes of storage in the program's representation for register N. */
+
+#define REGISTER_VIRTUAL_SIZE(N)	( (N) < FP0_REGNUM ? 4 : 8 )
+
+/* Largest value REGISTER_RAW_SIZE can have.  */
+
+#define MAX_REGISTER_RAW_SIZE 10
+
+/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
+
+#define MAX_REGISTER_VIRTUAL_SIZE 8
+
+/* Nonzero if register N requires conversion from raw format to virtual
+   format.  */
+
+#define REGISTER_CONVERTIBLE(N) ((N) >= FP0_REGNUM)
+
+#include "floatformat.h"
+
+#define TARGET_LONG_DOUBLE_FORMAT &floatformat_i960_ext
+
+/* Convert data from raw format for register REGNUM in buffer FROM
+   to virtual format with type TYPE in buffer TO.  */
+
+#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,TYPE,FROM,TO)	\
+{ \
+  DOUBLEST val; \
+  floatformat_to_doublest (&floatformat_i960_ext, (FROM), &val); \
+  store_floating ((TO), TYPE_LENGTH (TYPE), val); \
+}
+
+/* Convert data from virtual format with type TYPE in buffer FROM
+   to raw format for register REGNUM in buffer TO.  */
+
+#define REGISTER_CONVERT_TO_RAW(TYPE,REGNUM,FROM,TO)	\
+{ \
+  DOUBLEST val = extract_floating ((FROM), TYPE_LENGTH (TYPE)); \
+  floatformat_from_doublest (&floatformat_i960_ext, &val, (TO)); \
+}
+
+/* Return the GDB type object for the "standard" data type
+   of data in register N.  */
+
+#define REGISTER_VIRTUAL_TYPE(N) ((N) < FP0_REGNUM ? \
+					builtin_type_int : builtin_type_double)
+
+/* Macros for understanding function return values... */
+
+/* Does the specified function use the "struct returning" convention
+   or the "value returning" convention?  The "value returning" convention
+   almost invariably returns the entire value in registers.  The
+   "struct returning" convention often returns the entire value in
+   memory, and passes a pointer (out of or into the function) saying
+   where the value (is or should go).
+
+   Since this sometimes depends on whether it was compiled with GCC,
+   this is also an argument.  This is used in call_function to build a
+   stack, and in value_being_returned to print return values.
+
+   On i960, a structure is returned in registers g0-g3, if it will fit.
+   If it's more than 16 bytes long, g13 pointed to it on entry.  */
+
+extern use_struct_convention_fn i960_use_struct_convention;
+#define USE_STRUCT_CONVENTION(gcc_p, type) i960_use_struct_convention (gcc_p, type)
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  This is only called if USE_STRUCT_CONVENTION for this
+   type is 0.
+
+   On the i960 we just take as many bytes as we need from G0 through G3.  */
+
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+	memcpy(VALBUF, REGBUF+REGISTER_BYTE(G0_REGNUM), TYPE_LENGTH (TYPE))
+
+/* If USE_STRUCT_CONVENTION produces a 1, 
+   extract from an array REGBUF containing the (raw) register state
+   the address in which a function should return its structure value,
+   as a CORE_ADDR (or an expression that can be used as one).
+
+   Address of where to put structure was passed in in global
+   register g13 on entry.  God knows what's in g13 now.  The
+   (..., 0) below is to make it appear to return a value, though
+   actually all it does is call error().  */
+
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) \
+   (error("Don't know where large structure is returned on i960"), 0)
+
+/* Write into appropriate registers a function return value
+   of type TYPE, given in virtual format, for "value returning" functions.
+  
+   For 'return' command:  not (yet) implemented for i960.  */
+
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+    error ("Returning values from functions is not implemented in i960 gdb")
+
+/* Store the address of the place in which to copy the structure the
+   subroutine will return.  This is called from call_function. */
+
+#define STORE_STRUCT_RETURN(ADDR, SP) \
+    error ("Returning values from functions is not implemented in i960 gdb")
+
+/* Describe the pointer in each stack frame to the previous stack frame
+   (its caller).  */
+
+/* FRAME_CHAIN takes a frame's nominal address
+   and produces the frame's chain-pointer.
+
+   However, if FRAME_CHAIN_VALID returns zero,
+   it means the given frame is the outermost one and has no caller.  */
+
+/* We cache information about saved registers in the frame structure,
+   to save us from having to re-scan function prologues every time
+   a register in a non-current frame is accessed.  */
+
+#define EXTRA_FRAME_INFO 	\
+	struct frame_saved_regs *fsr;	\
+	CORE_ADDR arg_pointer;
+
+/* Zero the frame_saved_regs pointer when the frame is initialized,
+   so that FRAME_FIND_SAVED_REGS () will know to allocate and
+   initialize a frame_saved_regs struct the first time it is called.
+   Set the arg_pointer to -1, which is not valid; 0 and other values
+   indicate real, cached values.  */
+
+#define INIT_EXTRA_FRAME_INFO(fromleaf, fi) \
+	((fi)->fsr = 0, (fi)->arg_pointer = -1)
+
+/* On the i960, we get the chain pointer by reading the PFP saved
+   on the stack and clearing the status bits.  */
+
+#define FRAME_CHAIN(thisframe) \
+  (read_memory_integer (FRAME_FP(thisframe), 4) & ~0xf)
+
+/* FRAME_CHAIN_VALID returns zero if the given frame is the outermost one
+   and has no caller.
+
+   On the i960, each various target system type must define FRAME_CHAIN_VALID,
+   since it differs between NINDY and VxWorks, the two currently supported
+   targets types.  We leave it undefined here.  */
+
+
+/* A macro that tells us whether the function invocation represented
+   by FI does not have a frame on the stack associated with it.  If it
+   does not, FRAMELESS is set to 1, else 0.  */
+
+#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \
+  { (FRAMELESS) = (leafproc_return ((FI)->pc) != 0); }
+
+/* Note that in the i960 architecture the return pointer is saved in the
+   *caller's* stack frame.
+  
+   Make sure to zero low-order bits because of bug in 960CA A-step part
+   (instruction addresses should always be word-aligned anyway).  */
+
+#define FRAME_SAVED_PC(frame) \
+			((read_memory_integer(FRAME_CHAIN(frame)+8,4)) & ~3)
+
+/* On the i960, FRAME_ARGS_ADDRESS should return the value of
+   g14 as passed into the frame, if known.  We need a function for this.
+   We cache this value in the frame info if we've already looked it up.  */
+
+#define FRAME_ARGS_ADDRESS(fi) 	\
+  (((fi)->arg_pointer != -1)? (fi)->arg_pointer: frame_args_address (fi, 0))
+extern CORE_ADDR frame_args_address ();		/* i960-tdep.c */
+
+/* This is the same except it should return 0 when
+   it does not really know where the args are, rather than guessing.
+   This value is not cached since it is only used infrequently.  */
+
+#define	FRAME_ARGS_ADDRESS_CORRECT(fi)	(frame_args_address (fi, 1))
+
+#define FRAME_LOCALS_ADDRESS(fi)	(fi)->frame
+
+/* Set NUMARGS to the number of args passed to a frame.
+   Can return -1, meaning no way to tell.  */
+
+#define FRAME_NUM_ARGS(numargs, fi)	(numargs = -1)
+
+/* Return number of bytes at start of arglist that are not really args.  */
+
+#define FRAME_ARGS_SKIP 0
+
+/* Produce the positions of the saved registers in a stack frame.  */
+
+#define FRAME_FIND_SAVED_REGS(frame_info_addr, sr) \
+	frame_find_saved_regs (frame_info_addr, &sr)
+extern void frame_find_saved_regs();		/* See i960-tdep.c */
+
+/* Things needed for making calls to functions in the inferior process */
+
+/* Push an empty stack frame, to record the current ip, etc.
+  
+   Not (yet?) implemented for i960.  */
+
+#define PUSH_DUMMY_FRAME	\
+error("Function calls into the inferior process are not supported on the i960")
+
+/* Discard from the stack the innermost frame, restoring all registers.  */
+
+#define POP_FRAME \
+	pop_frame ()
+
+
+/* This sequence of words is the instructions
+  
+  	callx 0x00000000
+  	fmark
+ */
+
+/* #define CALL_DUMMY { 0x86003000, 0x00000000, 0x66003e00 } */
+
+/* #define CALL_DUMMY_START_OFFSET 0 *//* Start execution at beginning of dummy */
+
+/* Indicate that we don't support calling inferior child functions.  */
+
+#undef CALL_DUMMY
+
+/* Insert the specified number of args and function address
+   into a call sequence of the above form stored at 'dummyname'.
+  
+   Ignore arg count on i960.  */
+
+/* #define FIX_CALL_DUMMY(dummyname, fun, nargs) *(((int *)dummyname)+1) = fun */
+
+#undef FIX_CALL_DUMMY
+
+
+/* Interface definitions for kernel debugger KDB */
+/* (Not relevant to i960.) */
diff --git a/gdb/config/i960/tm-mon960.h b/gdb/config/i960/tm-mon960.h
new file mode 100644
index 0000000..e441e05
--- /dev/null
+++ b/gdb/config/i960/tm-mon960.h
@@ -0,0 +1,70 @@
+/* Parameters for Intel 960 running MON960 monitor, for GDB, the GNU debugger.
+   Copyright (C) 1990-1991 Free Software Foundation, Inc.
+   Contributed by Intel Corporation and Cygnus Support.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/*****************************************************************************
+ * Definitions to target GDB to an i960 debugged over a serial line.
+ ******************************************************************************/
+
+#include "i960/tm-i960.h"
+
+/* forward declarations */
+#ifdef __STDC__
+struct frame_info;
+#endif
+
+/* redefined from tm-i960.h */
+/* Number of machine registers */
+#undef NUM_REGS 
+#define NUM_REGS 40
+
+/* Initializer for an array of names of registers.
+   There should be NUM_REGS strings in this initializer.  */
+#undef REGISTER_NAMES 
+#define REGISTER_NAMES { \
+	/*  0 */ "pfp", "sp",  "rip", "r3",  "r4",  "r5",  "r6",  "r7", \
+	/*  8 */ "r8",  "r9",  "r10", "r11", "r12", "r13", "r14", "r15",\
+	/* 16 */ "g0",  "g1",  "g2",  "g3",  "g4",  "g5",  "g6",  "g7", \
+	/* 24 */ "g8",  "g9",  "g10", "g11", "g12", "g13", "g14", "fp", \
+	/* 32 */ "pc",  "ac",  "tc",  "ip",  "fp0", "fp1", "fp2", "fp3",\
+}
+
+/* Override the standard gdb prompt when compiled for this target.  */
+
+#define	DEFAULT_PROMPT	"(gdb960) "
+
+/* FRAME_CHAIN_VALID returns zero if the given frame is the outermost one
+   and has no caller.
+
+   On the i960, each various target system type defines FRAME_CHAIN_VALID,
+   since it differs between Nindy, Mon960 and VxWorks, the currently supported
+   target types.  */
+
+extern int mon960_frame_chain_valid PARAMS ((CORE_ADDR, struct frame_info *));
+#define	FRAME_CHAIN_VALID(chain, thisframe) mon960_frame_chain_valid (chain, thisframe)
+
+/* Sequence of bytes for breakpoint instruction */
+
+#define BREAKPOINT {0x00, 0x3e, 0x00, 0x66}
+
+/* Amount ip must be decremented by after a breakpoint.
+ * This is often the number of bytes in BREAKPOINT but not always.
+ */
+
+#define DECR_PC_AFTER_BREAK 4
diff --git a/gdb/config/i960/tm-nindy960.h b/gdb/config/i960/tm-nindy960.h
new file mode 100644
index 0000000..d0c46c0
--- /dev/null
+++ b/gdb/config/i960/tm-nindy960.h
@@ -0,0 +1,106 @@
+/* Parameters for Intel 960 running NINDY monitor, for GDB, the GNU debugger.
+   Copyright (C) 1990-1991 Free Software Foundation, Inc.
+   Contributed by Intel Corporation and Cygnus Support.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/*****************************************************************************
+ * Definitions to target GDB to an i960 debugged over a serial line.
+ ******************************************************************************/
+
+#include "i960/tm-i960.h"
+
+/* forward declarations */
+#ifdef __STDC__
+struct frame_info;
+#endif
+
+/* Override the standard gdb prompt when compiled for this target.  */
+
+#define	DEFAULT_PROMPT	"(gdb960) "
+
+/* Additional command line options accepted by nindy gdb's, for handling
+   the remote-nindy.c interface.  These should really be target-specific
+   rather than architecture-specific.  */
+
+extern int nindy_old_protocol;	/* nonzero if old NINDY serial protocol */
+extern int nindy_initial_brk;	/* Send a BREAK to reset board first */
+extern char *nindy_ttyname;	/* Name of serial port to talk to nindy */
+
+#define	ADDITIONAL_OPTIONS \
+	{"O", no_argument, &nindy_old_protocol, 1},	\
+	{"brk", no_argument, &nindy_initial_brk, 1},	\
+	{"ser", required_argument, 0, 1004},  /* 1004 is magic cookie for ADDL_CASES */
+
+#define	ADDITIONAL_OPTION_CASES	\
+	case 1004:	/* -ser option:  remote nindy auto-start */	\
+	  nindy_ttyname = optarg;	\
+	  break;
+
+#define	ADDITIONAL_OPTION_HELP \
+	"\
+  -O                Use old protocol to talk to a Nindy target\n\
+  -brk              Send a break to a Nindy target to reset it.\n\
+  -ser SERIAL       Open remote Nindy session to SERIAL port.\n\
+"
+
+/* If specified on the command line, open tty for talking to nindy,
+   and download the executable file if one was specified.  */
+
+#define	ADDITIONAL_OPTION_HANDLER	\
+	if (!SET_TOP_LEVEL () && nindy_ttyname) {		\
+	  nindy_open (nindy_ttyname, !batch);			\
+	  if (!SET_TOP_LEVEL () && execarg) {			\
+		target_load (execarg, !batch);			\
+	  }							\
+	}
+
+/* If configured for i960 target, we take control before main loop
+   and demand that we configure for a nindy target.  */
+
+#define	BEFORE_MAIN_LOOP_HOOK	\
+  nindy_before_main_loop();
+
+extern void
+nindy_before_main_loop();		/* In remote-nindy.c */
+
+/* FRAME_CHAIN_VALID returns zero if the given frame is the outermost one
+   and has no caller.
+
+   On the i960, each various target system type defines FRAME_CHAIN_VALID,
+   since it differs between NINDY and VxWorks, the two currently supported
+   targets types.  */
+
+extern int nindy_frame_chain_valid PARAMS ((CORE_ADDR, struct frame_info *));
+#define	FRAME_CHAIN_VALID(chain, thisframe) nindy_frame_chain_valid (chain, thisframe)
+
+extern int
+nindy_frame_chain_valid();		/* See nindy-tdep.c */
+
+/* Sequence of bytes for breakpoint instruction */
+
+#define BREAKPOINT {0x00, 0x3e, 0x00, 0x66}
+
+/* Amount ip must be decremented by after a breakpoint.
+ * This is often the number of bytes in BREAKPOINT but not always.
+ */
+
+#define DECR_PC_AFTER_BREAK 0
+
+#undef REGISTER_CONVERT_TO_VIRTUAL
+#undef REGISTER_CONVERT_TO_RAW
+#undef REGISTER_CONVERTIBLE
diff --git a/gdb/config/i960/tm-vx960.h b/gdb/config/i960/tm-vx960.h
new file mode 100644
index 0000000..17e2811
--- /dev/null
+++ b/gdb/config/i960/tm-vx960.h
@@ -0,0 +1,53 @@
+/* Parameters for VxWorks Intel 960's, for GDB, the GNU debugger.
+   Copyright (C) 1986-1991 Free Software Foundation, Inc.
+   Contributed by Cygnus Support.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+#include "i960/tm-i960.h"
+
+/* Under VxWorks the IP isn't filled in.  Skip it, go with RIP, which has
+   the real value.  */
+#undef PC_REGNUM
+#define PC_REGNUM RIP_REGNUM
+
+#define	GDBINIT_FILENAME	".vxgdbinit"
+
+#define	DEFAULT_PROMPT		"(vxgdb) "
+
+/* We have more complex, useful breakpoints on the target.
+   Amount ip must be decremented by after a breakpoint.  */
+
+#define	DECR_PC_AFTER_BREAK	0
+
+/* We are guaranteed to have a zero frame pointer at bottom of stack, too. */
+
+#define FRAME_CHAIN_VALID(chain, thisframe) nonnull_frame_chain_valid (chain, thisframe)
+
+/* Breakpoint patching is handled at the target end in VxWorks.  */
+/* #define BREAKPOINT {0x00, 0x3e, 0x00, 0x66} */
+
+/* Number of registers in a ptrace_getregs call. */
+
+#define VX_NUM_REGS (16 + 16 + 3)
+
+/* Number of registers in a ptrace_getfpregs call. */
+
+    /* @@ Can't use this -- the rdb library for the 960 target
+       doesn't support setting or retrieving FP regs.  KR  */
+
+/* #define VX_SIZE_FPREGS (REGISTER_RAW_SIZE (FP0_REGNUM) * 4) */
diff --git a/gdb/config/i960/vxworks960.mt b/gdb/config/i960/vxworks960.mt
new file mode 100644
index 0000000..ad32934
--- /dev/null
+++ b/gdb/config/i960/vxworks960.mt
@@ -0,0 +1,6 @@
+# Target: VxWorks running on an Intel 960
+TDEPFILES= i960-tdep.o remote-vx.o remote-vx960.o xdr_ld.o xdr_ptrace.o xdr_rdb.o
+TM_FILE= tm-vx960.h
+
+# Define this for the vx-share routines, which don't see param.h.
+MT_CFLAGS= -DI80960