* config/i386/ptx.mh (XDEPFILES): Add coredep.o. Delete infptrace.o.

	* symm-nat.c (child_wait, _initialize_symm_nat, kill_inferior):
	Supply alternate version if ATTACH_DETACH is not defined.
	* ptx4-nat.c, config/i386/{nm-ptx4.h, ptx4.mh, ptx.mt, ptx4.mt,
	tm-ptx.h, tm-ptx4.h, xm-ptx.h, xm-ptx4.h}: New files.
	* configure.in: Recognize i[34]86-sequent-sysv4* host.

10 files changed, 410 insertions, 2 deletions

diff --git a/gdb/config/i386/.Sanitize b/gdb/config/i386/.Sanitize
index 647400c..5ce8e5e 100644
--- a/gdb/config/i386/.Sanitize
+++ b/gdb/config/i386/.Sanitize
@@ -58,9 +58,13 @@ nm-i386sco4.h
 nm-i386v.h
 nm-i386v4.h
 nm-linux.h
+nm-ptx4.h
 nm-sun386.h
 nm-symmetry.h
 ptx.mh
+ptx.mt
+ptx4.mh
+ptx4.mt
 sun386.mh
 sun386.mt
 symmetry.mh
@@ -75,6 +79,8 @@ tm-i386os9k.h
 tm-i386v.h
 tm-i386v4.h
 tm-linux.h
+tm-ptx.h
+tm-ptx4.h
 tm-sun386.h
 tm-symmetry.h
 xm-go32.h
@@ -89,6 +95,8 @@ xm-i386v.h
 xm-i386v32.h
 xm-i386v4.h
 xm-linux.h
+xm-ptx.h
+xm-ptx4.h
 xm-sun386.h
 xm-symmetry.h
 
diff --git a/gdb/config/i386/nm-ptx4.h b/gdb/config/i386/nm-ptx4.h
index e69de29..654f9b4 100644
--- a/gdb/config/i386/nm-ptx4.h
+++ b/gdb/config/i386/nm-ptx4.h
@@ -0,0 +1,58 @@
+/* Definitions to make GDB run on a Sequent Symmetry under ptx
+   with Weitek 1167 and i387 support.
+   Copyright 1986, 1987, 1989, 1992  Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+#include "nm-sysv4.h"
+
+#undef USE_PROC_FS
+
+#include "nm-symmetry.h"
+
+#define PTRACE_READ_REGS(pid,regaddr) mptrace (XPT_RREGS, (pid), (regaddr), 0)
+#define PTRACE_WRITE_REGS(pid,regaddr) \
+  mptrace (XPT_WREGS, (pid), (regaddr), 0)
+
+/* Override copies of {fetch,store}_inferior_registers in infptrace.c.  */
+
+#define FETCH_INFERIOR_REGISTERS
+
+#define CHILD_WAIT
+struct target_waitstatus;
+extern int child_wait PARAMS ((int, struct target_waitstatus *));
+
+/*
+ * ptx does attach as of ptx version 2.1.  Prior to that, the interface
+ * exists but does not work.
+ *
+ * FIXME: Using attach/detach requires using the ptx MPDEBUGGER
+ * interface.  There are still problems with that, so for now don't
+ * enable attach/detach.  If you turn it on anyway, it will mostly
+ * work, but has a number of bugs. -fubar, 2/94.
+ */
+/*#define ATTACH_DETACH 1*/
+#undef ATTACH_DETACH
+#define PTRACE_ATTACH XPT_DEBUG
+#define PTRACE_DETACH XPT_UNDEBUG
+/*
+ * The following drivel is needed because there are two ptrace-ish
+ * calls on ptx: ptrace() and mptrace(), each of which does about half
+ * of the ptrace functions.
+ */
+#define PTRACE_ATTACH_CALL(pid)  ptx_do_attach(pid)
+#define PTRACE_DETACH_CALL(pid, signo) ptx_do_detach(pid, signo)
diff --git a/gdb/config/i386/ptx.mh b/gdb/config/i386/ptx.mh
index cd2bedd..20e17d8 100644
--- a/gdb/config/i386/ptx.mh
+++ b/gdb/config/i386/ptx.mh
@@ -1,6 +1,6 @@
 # Host: Sequent Symmetry running ptx 1.3, with Weitek 1167 or i387.
-XDEPFILES= infptrace.o inftarg.o fork-child.o symm-nat.o corelow.o
-XM_FILE= xm-symmetry.h
+XDEPFILES= inftarg.o fork-child.o symm-nat.o corelow.o coredep.o
+XM_FILE= xm-ptx.h
 NAT_FILE= nm-symmetry.h
 XM_CLIBS= -lPW -lseq
 REGEX=regex.o
diff --git a/gdb/config/i386/ptx.mt b/gdb/config/i386/ptx.mt
index e69de29..cfa8c6e 100644
--- a/gdb/config/i386/ptx.mt
+++ b/gdb/config/i386/ptx.mt
@@ -0,0 +1,3 @@
+# Target: Sequent Symmetry running ptx 2.0, with Weitek 1167 or i387.
+TDEPFILES= exec.o symm-tdep.o i386-pinsn.o i387-tdep.o i386-tdep.o
+TM_FILE= tm-ptx.h
diff --git a/gdb/config/i386/ptx4.mh b/gdb/config/i386/ptx4.mh
index e69de29..dd06a9c 100644
--- a/gdb/config/i386/ptx4.mh
+++ b/gdb/config/i386/ptx4.mh
@@ -0,0 +1,7 @@
+# Host: Sequent Symmetry running ptx 1.3, with Weitek 1167 or i387.
+XDEPFILES= inftarg.o fork-child.o symm-nat.o corelow.o coredep.o solib.o core-svr4.o
+XM_FILE= xm-ptx4.h
+NAT_FILE= nm-ptx4.h
+XM_CLIBS= -lseq
+REGEX=regex.o
+REGEX1=regex.o
diff --git a/gdb/config/i386/ptx4.mt b/gdb/config/i386/ptx4.mt
index e69de29..cc1600d 100644
--- a/gdb/config/i386/ptx4.mt
+++ b/gdb/config/i386/ptx4.mt
@@ -0,0 +1,3 @@
+# Target: Sequent Symmetry running ptx 4.0, with Weitek 1167 or i387.
+TDEPFILES= exec.o symm-tdep.o i386-pinsn.o i387-tdep.o i386-tdep.o
+TM_FILE= tm-ptx4.h
diff --git a/gdb/config/i386/tm-ptx.h b/gdb/config/i386/tm-ptx.h
index e69de29..6b556cd 100644
--- a/gdb/config/i386/tm-ptx.h
+++ b/gdb/config/i386/tm-ptx.h
@@ -0,0 +1,232 @@
+/* Target machine definitions for GDB on a Sequent Symmetry under ptx
+   with Weitek 1167 and i387 support.
+   Copyright 1986, 1987, 1989, 1991, 1992, 1993 Free Software Foundation, Inc.
+   Symmetry version by Jay Vosburgh (fubar@sequent.com).
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+/* I don't know if this will work for cross-debugging, even if you do get
+   a copy of the right include file.  */
+#include <sys/reg.h>
+
+/*
+#define SDB_REG_TO_REGNUM(value) ptx_coff_regno_to_gdb(value)
+extern int ptx_coff_regno_to_gdb();
+*/
+
+#define START_INFERIOR_TRAPS_EXPECTED 2
+
+/* Amount PC must be decremented by after a breakpoint.
+   This is often the number of bytes in BREAKPOINT
+   but not always.  */
+
+#define DECR_PC_AFTER_BREAK 0
+
+#ifdef SEQUENT_PTX4
+#include "i386/tm-i386v4.h"
+#else /* !SEQUENT_PTX4 */
+#include "i386/tm-i386v.h"
+#endif
+
+#if 0
+ --- this code can't be used unless we know we are running native,
+     since it uses host specific ptrace calls.
+/* code for 80387 fpu.  Functions are from i386-dep.c, copied into
+ * symm-dep.c.
+ */
+#define FLOAT_INFO { i386_float_info(); }
+#endif
+
+/* Number of machine registers */
+#undef NUM_REGS
+#define NUM_REGS 49
+
+/* Initializer for an array of names of registers.
+   There should be NUM_REGS strings in this initializer.  */
+
+#undef REGISTER_NAMES
+#define REGISTER_NAMES { "eax", "ecx", "edx", "ebx", \
+			 "esp", "ebp", "esi", "edi", \
+			 "eip", "eflags", "st0", "st1", "st2", \
+			 "st3", "st4", "st5", "st6", "st7", \
+			 "fp1", "fp2", "fp3", "fp4", "fp5", "fp6", "fp7", \
+			     "fp8", "fp9", "fp10", "fp11", "fp12", \
+			     "fp13", "fp14", "fp15", "fp16", "fp17", \
+			     "fp18", "fp19", "fp20", "fp21", "fp22", \
+			     "fp23", "fp24", "fp25", "fp26", "fp27", \
+			     "fp28", "fp29", "fp30", "fp31" }
+
+/* Register numbers of various important registers.
+   Note that some of these values are "real" register numbers,
+   and correspond to the general registers of the machine,
+   and some are "phony" register numbers which are too large
+   to be actual register numbers as far as the user is concerned
+   but do serve to get the desired values when passed to read_register.  */
+
+#define EAX_REGNUM	0
+#define ECX_REGNUM	1
+#define EDX_REGNUM	2
+#define EBX_REGNUM	3
+
+#define ESP_REGNUM	4
+#define EBP_REGNUM	5
+
+#define ESI_REGNUM	6
+#define EDI_REGNUM	7
+
+#define EIP_REGNUM	8
+#define EFLAGS_REGNUM	9
+
+#define ST0_REGNUM	10
+#define ST1_REGNUM	11
+#define ST2_REGNUM	12
+#define ST3_REGNUM	13
+
+#define ST4_REGNUM	14
+#define ST5_REGNUM	15
+#define ST6_REGNUM	16
+#define ST7_REGNUM	17
+
+#define FP1_REGNUM 18		/* first 1167 register */
+/* Get %fp2 - %fp31 by addition, since they are contiguous */
+
+#undef SP_REGNUM
+#define SP_REGNUM ESP_REGNUM	/* Contains address of top of stack */
+#undef FP_REGNUM
+#define FP_REGNUM EBP_REGNUM	/* Contains address of executing stack frame */
+#undef PC_REGNUM
+#define PC_REGNUM EIP_REGNUM	/* Contains program counter */
+#undef PS_REGNUM
+#define PS_REGNUM EFLAGS_REGNUM	/* Contains processor status */
+
+/*
+ * For ptx, this is a little bit bizarre, since the register block
+ * is below the u area in memory.  This means that blockend here ends
+ * up being negative (for the call from coredep.c) since the value in
+ * u.u_ar0 will be less than KERNEL_U_ADDR (and coredep.c passes us
+ * u.u_ar0 - KERNEL_U_ADDR in blockend).  Since we also define
+ * FETCH_INFERIOR_REGISTERS (and supply our own functions for that),
+ * the core file case will be the only use of this function.
+ */
+
+#define REGISTER_U_ADDR(addr, blockend, regno) \
+{ (addr) = ptx_register_u_addr((blockend), (regno)); }
+
+extern int
+ptx_register_u_addr PARAMS ((int, int));
+
+
+/* Total amount of space needed to store our copies of the machine's
+   register state, the array `registers'.  */
+/* 10 i386 registers, 8 i387 registers, and 31 Weitek 1167 registers */
+#undef REGISTER_BYTES
+#define REGISTER_BYTES ((10 * 4) + (8 * 10) + (31 * 4))
+
+/* Index within `registers' of the first byte of the space for
+   register N.  */
+
+#undef REGISTER_BYTE
+#define REGISTER_BYTE(N) 		\
+((N < ST0_REGNUM) ? (N * 4) : \
+ (N < FP1_REGNUM) ? (40 + ((N - ST0_REGNUM) * 10)) : \
+ (40 + 80 + ((N - FP1_REGNUM) * 4)))
+
+/* Number of bytes of storage in the actual machine representation
+ * for register N.  All registers are 4 bytes, except 387 st(0) - st(7),
+ * which are 80 bits each. 
+ */
+
+#undef REGISTER_RAW_SIZE
+#define REGISTER_RAW_SIZE(N) \
+((N < ST0_REGNUM) ? 4 : \
+ (N < FP1_REGNUM) ? 10 : \
+ 4)
+
+/* Largest value REGISTER_RAW_SIZE can have.  */
+
+#undef MAX_REGISTER_RAW_SIZE
+#define MAX_REGISTER_RAW_SIZE 10
+
+/* Nonzero if register N requires conversion
+   from raw format to virtual format.  */
+
+#undef REGISTER_CONVERTIBLE
+#define REGISTER_CONVERTIBLE(N) \
+((N < ST0_REGNUM) ? 0 : \
+ (N < FP1_REGNUM) ? 1 : \
+ 0)
+  
+/* Convert data from raw format for register REGNUM
+   to virtual format for register REGNUM.  */
+extern const struct floatformat floatformat_i387_ext; /* from floatformat.h */
+
+#undef REGISTER_CONVERT_TO_VIRTUAL
+#define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,TYPE,FROM,TO)	\
+((REGNUM < ST0_REGNUM) ?  (void)memcpy ((TO), (FROM), 4) : \
+ (REGNUM < FP1_REGNUM) ? (void)floatformat_to_double(&floatformat_i387_ext, \
+						       (FROM),(TO)) : \
+ (void)memcpy ((TO), (FROM), 4))
+ 
+/* Convert data from virtual format for register REGNUM
+   to raw format for register REGNUM.  */
+
+#undef REGISTER_CONVERT_TO_RAW
+#define REGISTER_CONVERT_TO_RAW(TYPE,REGNUM,FROM,TO)	\
+((REGNUM < ST0_REGNUM) ?  (void)memcpy ((TO), (FROM), 4) : \
+ (REGNUM < FP1_REGNUM) ? (void)floatformat_from_double(&floatformat_i387_ext, \
+						       (FROM),(TO)) : \
+ (void)memcpy ((TO), (FROM), 4))
+
+/* Return the GDB type object for the "standard" data type
+   of data in register N.  */
+/*
+ * Note: the 1167 registers (the last line, builtin_type_float) are
+ * generally used in pairs, with each pair being treated as a double.
+ * It it also possible to use them singly as floats.  I'm not sure how
+ * in gdb to treat the register pair pseudo-doubles. -fubar
+ */
+#undef REGISTER_VIRTUAL_TYPE
+#define REGISTER_VIRTUAL_TYPE(N) \
+((N < ST0_REGNUM) ? builtin_type_int : \
+ (N < FP1_REGNUM) ? builtin_type_double : \
+ builtin_type_float)
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  */
+
+#undef EXTRACT_RETURN_VALUE
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+  symmetry_extract_return_value(TYPE, REGBUF, VALBUF)
+
+
+/*
+ * Removed extra PUSH_DUMMY_FRAME, et al: it was identical to the
+ * i386-tdep.c version.
+ */
+
+extern void
+print_387_control_word PARAMS ((unsigned int));
+
+extern void
+print_387_status_word PARAMS ((unsigned int));
+
+/*
+#undef FRAME_FIND_SAVED_REGS
+#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \
+{ ptx_frame_find_saved_regs((frame_info), &(frame_saved_regs)); }
+*/
diff --git a/gdb/config/i386/tm-ptx4.h b/gdb/config/i386/tm-ptx4.h
index e69de29..d719b4f 100644
--- a/gdb/config/i386/tm-ptx4.h
+++ b/gdb/config/i386/tm-ptx4.h
@@ -0,0 +1,24 @@
+/* Target machine definitions for GDB on a Sequent Symmetry under ptx
+   with Weitek 1167 and i387 support.
+   Copyright 1986, 1987, 1989, 1991, 1992, 1993 Free Software Foundation, Inc.
+   Symmetry version by Jay Vosburgh (fubar@sequent.com).
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+#define SEQUENT_PTX4
+
+#include "tm-ptx.h"
diff --git a/gdb/config/i386/xm-ptx.h b/gdb/config/i386/xm-ptx.h
index e69de29..fe68098 100644
--- a/gdb/config/i386/xm-ptx.h
+++ b/gdb/config/i386/xm-ptx.h
@@ -0,0 +1,48 @@
+/* Definitions to make GDB run on a Sequent Symmetry under ptx, with
+   Weitek 1167 and i387 support.  Copyright 1986, 1987, 1989, 1992,
+   1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+/* Symmetry version by Jay Vosburgh (fubar@sequent.com) */
+
+#ifdef _SEQUENT_PTX4_
+#include "xm-sysv4.h"
+#endif /* _SEQUENT_PTX4_ */
+
+/* This machine doesn't have the siginterrupt call.  */
+#define NO_SIGINTERRUPT
+
+#define HAVE_WAIT_STRUCT
+
+#define HAVE_MMAP
+
+#undef HAVE_TERMIO
+#define HAVE_TERMIOS
+#define USG
+
+#define MEM_FNS_DECLARED
+
+#define NEED_POSIX_SETPGID
+
+#define USE_O_NOCTTY
+
+#define HOST_BYTE_ORDER LITTLE_ENDIAN
+
+/* We must fetch all the regs before storing, since we store all at once.  */
+
+#define CHILD_PREPARE_TO_STORE() read_register_bytes (0, NULL, REGISTER_BYTES)
diff --git a/gdb/config/i386/xm-ptx4.h b/gdb/config/i386/xm-ptx4.h
index e69de29..87ebf1a 100644
--- a/gdb/config/i386/xm-ptx4.h
+++ b/gdb/config/i386/xm-ptx4.h
@@ -0,0 +1,25 @@
+/* Definitions to make GDB run on a Sequent Symmetry under ptx, with
+   Weitek 1167 and i387 support.  Copyright 1986, 1987, 1989, 1992,
+   1993 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
+
+/* Symmetry version by Jay Vosburgh (fubar@sequent.com) */
+
+#include "xm-sysv4.h"
+
+#include "xm-ptx.h"