Initial creation of sourceware repositorygdb-4_18-branchpoint

2 files changed, 299 insertions, 0 deletions

diff --git a/gdb/config/h8500/h8500.mt b/gdb/config/h8500/h8500.mt
new file mode 100644
index 0000000..35f6b4d
--- /dev/null
+++ b/gdb/config/h8500/h8500.mt
@@ -0,0 +1,6 @@
+# Target: H8500 with HMS monitor and H8 simulator
+TDEPFILES= h8500-tdep.o monitor.o remote-hms.o dsrec.o
+TM_FILE= tm-h8500.h
+
+SIM_OBS = remote-sim.o
+SIM = ../sim/h8500/libsim.a
diff --git a/gdb/config/h8500/tm-h8500.h b/gdb/config/h8500/tm-h8500.h
new file mode 100644
index 0000000..8f7d966
--- /dev/null
+++ b/gdb/config/h8500/tm-h8500.h
@@ -0,0 +1,293 @@
+/* Parameters for execution on a H8/500 series machine.
+   Copyright (C) 1993, 1995 Free Software Foundation, Inc.
+
+This file is part of GDB.
+
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+
+/* Contributed by Steve Chamberlain sac@cygnus.com */
+
+#define GDB_TARGET_IS_H8500
+
+#define IEEE_FLOAT 1
+
+/* Define the bit, byte, and word ordering of the machine.  */
+
+#define TARGET_BYTE_ORDER BIG_ENDIAN
+
+/* Define the sizes of integers and pointers.  */
+
+#define TARGET_INT_BIT 16
+
+#define TARGET_LONG_BIT 32
+
+#define TARGET_PTR_BIT (minimum_mode ? 16 : 32)
+
+/* Offset from address of function to start of its code.
+   Zero on most machines.  */
+
+#define FUNCTION_START_OFFSET 0
+
+/* Advance PC across any function entry prologue instructions
+   to reach some "real" code.  */
+
+#define SKIP_PROLOGUE(ip)   { (ip) = h8500_skip_prologue(ip); }
+extern CORE_ADDR h8500_skip_prologue PARAMS ((CORE_ADDR));
+
+/* Immediately after a function call, return the saved pc.
+   Can't always go through the frames for this because on some machines
+   the new frame is not set up until the new function executes
+   some instructions.  */
+
+#define SAVED_PC_AFTER_CALL(frame) saved_pc_after_call()
+extern CORE_ADDR saved_pc_after_call PARAMS ((void));
+
+/* Stack grows downward.  */
+
+#define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
+
+/* Illegal instruction - used by the simulator for breakpoint
+   detection */
+
+#define BREAKPOINT {0x0b}
+
+/* If your kernel resets the pc after the trap happens you may need to
+   define this before including this file.  */
+
+#define DECR_PC_AFTER_BREAK 0
+
+/* Say how long registers are.  */
+
+#define REGISTER_TYPE  unsigned long
+
+/* Say how much memory is needed to store a copy of the register set */
+
+#define REGISTER_BYTES    (NUM_REGS * 4) 
+
+/* Index within `registers' of the first byte of the space for
+   register N.  */
+
+#define REGISTER_BYTE(N)  ((N)*4)
+
+/* Number of bytes of storage in the actual machine representation
+   for register N.  */
+
+#define REGISTER_RAW_SIZE(N) h8500_register_size(N)
+extern int h8500_register_size PARAMS ((int regno));
+
+#define REGISTER_SIZE 4
+
+#define REGISTER_VIRTUAL_SIZE(N) h8500_register_size(N)
+
+/* Largest value REGISTER_RAW_SIZE can have.  */
+
+#define MAX_REGISTER_RAW_SIZE 4
+
+/* Largest value REGISTER_VIRTUAL_SIZE can have.  */
+
+#define MAX_REGISTER_VIRTUAL_SIZE 4
+
+/* Return the GDB type object for the "standard" data type
+   of data in register N.  */
+
+#define REGISTER_VIRTUAL_TYPE(N) h8500_register_virtual_type(N)
+extern struct type *h8500_register_virtual_type PARAMS ((int regno));
+
+/* Initializer for an array of names of registers.
+   Entries beyond the first NUM_REGS are ignored.  */
+
+#define REGISTER_NAMES \
+  { "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \
+   "pr0","pr1","pr2","pr3","pr4","pr5","pr6","pr7", \
+    "cp", "dp", "ep", "tp", "sr", "pc"}
+
+/* Register numbers of various important registers.  Note that some of
+   these values are "real" register numbers, and correspond to the
+   general registers of the machine, and some are "phony" register
+   numbers which are too large to be actual register numbers as far as
+   the user is concerned but do serve to get the desired values when
+   passed to read_register.  */
+
+#define R0_REGNUM	0
+#define R1_REGNUM	1
+#define R2_REGNUM	2
+#define R3_REGNUM	3
+#define R4_REGNUM	4
+#define R5_REGNUM	5
+#define R6_REGNUM	6
+#define R7_REGNUM	7
+
+#define PR0_REGNUM	8
+#define PR1_REGNUM	9
+#define PR2_REGNUM	10
+#define PR3_REGNUM	11
+#define PR4_REGNUM	12
+#define PR5_REGNUM	13
+#define PR6_REGNUM	14
+#define PR7_REGNUM	15
+
+#define SEG_C_REGNUM	16	/* Segment registers */
+#define SEG_D_REGNUM	17
+#define SEG_E_REGNUM	18
+#define SEG_T_REGNUM	19
+
+#define CCR_REGNUM      20	/* Contains processor status */
+#define PC_REGNUM       21	/* Contains program counter */
+
+#define NUM_REGS 	22
+
+#define SP_REGNUM       PR7_REGNUM /* Contains address of top of stack */
+#define FP_REGNUM       PR6_REGNUM /* Contains address of executing stack frame */
+
+#define PTR_SIZE (minimum_mode ? 2 : 4)
+#define PTR_MASK (minimum_mode ? 0x0000ffff : 0x00ffffff)
+
+/* Store the address of the place in which to copy the structure the
+   subroutine will return.  This is called from call_function. */
+
+/*#define STORE_STRUCT_RETURN(ADDR, SP) \
+  { write_register (0, (ADDR)); abort(); }*/
+
+/* Extract from an array REGBUF containing the (raw) register state
+   a function return value of type TYPE, and copy that, in virtual format,
+   into VALBUF.  */
+
+#define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
+  memcpy (VALBUF, (char *)(REGBUF), TYPE_LENGTH(TYPE))
+
+/* Write into appropriate registers a function return value
+   of type TYPE, given in virtual format.  */
+
+#define STORE_RETURN_VALUE(TYPE,VALBUF) \
+  write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE))
+
+/* Extract from an array REGBUF containing the (raw) register state
+   the address in which a function should return its structure value,
+   as a CORE_ADDR (or an expression that can be used as one).  */
+
+#define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(CORE_ADDR *)(REGBUF))
+
+
+/* Define other aspects of the stack frame.  */
+
+/* A macro that tells us whether the function invocation represented
+   by FI does not have a frame on the stack associated with it.  If it
+   does not, FRAMELESS is set to 1, else 0.  */
+
+#define FRAMELESS_FUNCTION_INVOCATION(FI, FRAMELESS) \
+  (FRAMELESS) = frameless_look_for_prologue(FI)
+
+/* Any function with a frame looks like this
+   SECOND ARG
+   FIRST ARG
+   RET PC
+   SAVED R2
+   SAVED R3
+   SAVED FP   <-FP POINTS HERE
+   LOCALS0
+   LOCALS1    <-SP POINTS HERE
+   
+   */
+
+#define INIT_EXTRA_FRAME_INFO(fromleaf, fci)  ;
+/*       (fci)->frame |= read_register(SEG_T_REGNUM) << 16;*/
+
+#define FRAME_CHAIN(FRAME) h8500_frame_chain(FRAME)
+struct frame_info;
+extern CORE_ADDR h8500_frame_chain PARAMS ((struct frame_info *));
+
+#define FRAME_SAVED_PC(FRAME) frame_saved_pc(FRAME)
+extern CORE_ADDR frame_saved_pc PARAMS ((struct frame_info *frame));
+
+#define FRAME_ARGS_ADDRESS(fi) ((fi)->frame)
+
+#define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)
+
+/* Set VAL to the number of args passed to frame described by FI.
+   Can set VAL to -1, meaning no way to tell.  */
+
+/* We can't tell how many args there are
+   now that the C compiler delays popping them.  */
+
+#define FRAME_NUM_ARGS(val,fi) (val = -1)
+
+/* Return number of bytes at start of arglist that are not really args.  */
+
+#define FRAME_ARGS_SKIP 0
+
+/* Put here the code to store, into a struct frame_saved_regs,
+   the addresses of the saved registers of frame described by FRAME_INFO.
+   This includes special registers such as pc and fp saved in special
+   ways in the stack frame.  sp is even more special:
+   the address we return for it IS the sp for the next frame.  */
+
+#define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs)	    \
+   frame_find_saved_regs(frame_info, &(frame_saved_regs))
+struct frame_saved_regs;
+extern void frame_find_saved_regs PARAMS ((struct frame_info *frame_info, struct frame_saved_regs *frame_saved_regs));
+
+
+/* Discard from the stack the innermost frame, restoring all registers.  */
+
+#define POP_FRAME { h8500_pop_frame (); }
+extern void h8500_pop_frame PARAMS ((void));
+
+#define SHORT_INT_MAX 32767
+#define SHORT_INT_MIN -32768
+
+#define NAMES_HAVE_UNDERSCORE
+
+typedef unsigned short INSN_WORD;
+
+extern CORE_ADDR h8500_addr_bits_remove PARAMS ((CORE_ADDR));
+#define ADDR_BITS_REMOVE(addr) h8500_addr_bits_remove (addr)
+
+#define read_memory_short(x)  (read_memory_integer(x,2) & 0xffff)
+
+#define	PRINT_REGISTER_HOOK(regno) print_register_hook(regno)
+extern void print_register_hook PARAMS ((int));
+
+extern int minimum_mode;
+
+#define CALL_DUMMY_LENGTH 10
+
+/* Fake variables to make it easy to use 24 bit register pointers */
+
+#define IS_TRAPPED_INTERNALVAR h8500_is_trapped_internalvar
+extern int h8500_is_trapped_internalvar PARAMS ((char *name));
+
+#define VALUE_OF_TRAPPED_INTERNALVAR h8500_value_of_trapped_internalvar
+extern struct value * h8500_value_of_trapped_internalvar (/* struct internalvar *var */);
+
+#define SET_TRAPPED_INTERNALVAR h8500_set_trapped_internalvar
+extern void h8500_set_trapped_internalvar (/* struct internalvar *var, value newval, int bitpos, int bitsize, int offset */);
+
+extern CORE_ADDR h8500_read_sp PARAMS ((void));
+extern void h8500_write_sp PARAMS ((CORE_ADDR));
+
+extern CORE_ADDR h8500_read_fp PARAMS ((void));
+extern void h8500_write_fp PARAMS ((CORE_ADDR));
+
+extern CORE_ADDR h8500_read_pc PARAMS ((int));
+extern void h8500_write_pc PARAMS ((CORE_ADDR, int));
+
+#define TARGET_READ_SP() h8500_read_sp()
+#define TARGET_WRITE_SP(x) h8500_write_sp(x)
+
+#define TARGET_READ_PC(pid) h8500_read_pc(pid)
+#define TARGET_WRITE_PC(x,pid) h8500_write_pc(x,pid)
+
+#define TARGET_READ_FP() h8500_read_fp()
+#define TARGET_WRITE_FP(x) h8500_write_fp(x)