gdb-3.3

1 files changed, 0 insertions, 240 deletions

diff --git a/gdb/Makefile b/gdb/Makefile
deleted file mode 100644
index b47091c..0000000
--- a/gdb/Makefile
+++ /dev/null
@@ -1,240 +0,0 @@
-# On HPUX, you need to add -Ihp-include to CFLAGS.
-# The headers in the directory hp-include override system headers
-# and tell GDB to use BSD executable file format.
-# You must also define REGEX & REGEX1 below and ALLOCA & ALLOCA1 (get
-# alloca.c from the emacs distribution) to the CLIBS.
-# If you compile GDB with GCC on HPUX, you must make sure that the "nm" used
-# in "munch" is GNU's nm.  This is because gcc uses a different .o
-# file format than the native HPUX compiler.
-
-# On USG (System V) machines, you must make sure to setup REGEX &
-# REGEX1 to point at regex.o and use the USG version of CLIBS.  
-# If your system has a broken alloca() -- most do -- then get
-# alloca.c from the GNU Emacs distribution and set ALLOCA & ALLOCA1.
-# Also, if you compile gdb with a compiler which uses the coff
-# encapsulation feature (this is a function of the compiler used, NOT
-# of the m-?.h file selected by config.gdb), you must make sure that
-# the GNU nm is the one that is used by munch.
-
-# On Sunos 4.0 machines, make sure to compile *without* shared
-# libraries if you want to run gdb on itself.  Make sure to compile
-# any program on which you want to run gdb without shared libraries.
-
-# If you are compiling with GCC, make sure that either 1) You use the
-# -traditional flag, or 2) You have the fixed include files where GCC
-# can reach them.  Otherwise the ioctl calls in inflow.c will be
-# incorrectly compiled.  The "fixincludes" script in the gcc
-# distribution will probably fix your include files up.
-
-CC=cc
-SHELL=/bin/sh
-
-# Set this up with gcc if you have gnu ld and the loader will print out
-# line numbers for undefinded refs.  
-CC-LD=${CC}
-
-# -I. for "#include <obstack.h>".  Possibly regex.h also.
-#CFLAGS = -g -pg -I. -O
-CFLAGS = -I. -g
-#LDFLAGS = -pg -g
-LDFLAGS = -g
-
-# define this to be "obstack.o" if you don't have the obstack library installed
-# you must at the same time define OBSTACK1 as "obstack.o" 
-# so that the dependencies work right.  Similarly with REGEX and "regex.o".
-# You must define REGEX and REGEX1 on USG machines.
-# If your system is missing alloca(), or, more likely, it's there but it
-# doesn't work, define ALLOCA and ALLOCA1.
-OBSTACK = obstack.o
-OBSTACK1 = obstack.o
-REGEX = regex.o
-REGEX1 = regex.o
-ALLOCA = alloca.o
-ALLOCA1 = alloca.o
-ADD_FILES = $(OBSTACK)  $(REGEX)  $(ALLOCA)  $(GNU_MALLOC)
-ADD_DEPS  = $(OBSTACK1) $(REGEX1) $(ALLOCA1) $(GNU_MALLOC)
-
-#
-# define this to be "malloc.o" if you want to use the gnu malloc routine
-# (useful for debugging memory allocation problems in gdb).  Otherwise, leave
-# it blank.
-GNU_MALLOC =
-#GNU_MALLOC = malloc.o
-
-# Flags to be used in compiling malloc.o
-# Specify range checking for storage allocation.
-MALLOC_FLAGS =
-#MALLOC_FLAGS = ${CFLAGS} -Drcheck -Dbotch=fatal -DMSTATS
-
-# for BSD
-CLIBS = $(ADD_FILES)
-# for USG
-#CLIBS= $(ADD_FILES) -lPW
-
-SFILES = blockframe.c breakpoint.c coffread.c command.c core.c dbxread.c \
-	 environ.c eval.c expprint.c findvar.c infcmd.c inflow.c infrun.c \
-	 kdb-start.c main.c printcmd.c \
-	 remote.c source.c stack.c standalone.c stuff.c symmisc.c symtab.c \
-	 utils.c valarith.c valops.c valprint.c values.c version.c expread.y \
-	 xgdb.c
-
-DEPFILES = convex-dep.c umax-dep.c gould-dep.c default-dep.c sun3-dep.c \
-	   sparc-dep.c hp9k320-dep.c news-dep.c i386-dep.c
-
-PINSNS = gld-pinsn.c i386-pinsn.c sparc-pinsn.c vax-pinsn.c m68k-pinsn.c \
-	 ns32k-pinsn.c
-
-HFILES = command.h defs.h environ.h expression.h frame.h getpagesize.h \
-	 inferior.h symseg.h symtab.h value.h wait.h \
-	 a.out.encap.h a.out.gnu.h stab.gnu.h 
-
-OPCODES = m68k-opcode.h pn-opcode.h sparc-opcode.h npl-opcode.h vax-opcode.h \
-	  ns32k-opcode.h
-
-MFILES = m-hp9k320.h m-i386.h m-i386gas.h m-isi.h m-merlin.h m-news.h \
-	 m-npl.h m-pn.h m-sparc.h m-sun2.h m-sun3.h m-sun2os4.h \
-	 m-sun3os4.h m-sun4os4.h m-umax.h m-vax.h 
-
-POSSLIBS = obstack.h obstack.c regex.c regex.h malloc.c 
-
-TESTS = testbpt.c testfun.c testrec.c testreg.c testregs.c
-
-OTHERS = Makefile createtags munch config.gdb ChangeLog README TAGS \
-	 gdb.texinfo .gdbinit COPYING expread.tab.c stab.def hp-include
-
-TAGFILES = ${SFILES} ${DEPFILES} ${PINSNS} ${HFILES} ${OPCODES} ${MFILES} \
-	   ${POSSLIBS}
-TARFILES = ${TAGFILES} ${OTHERS}
-
-OBS = main.o blockframe.o breakpoint.o findvar.o stack.o source.o \
-    values.o eval.o valops.o valarith.o valprint.o printcmd.o \
-    symtab.o symmisc.o coffread.o dbxread.o infcmd.o infrun.o remote.o \
-    command.o utils.o expread.o expprint.o pinsn.o environ.o version.o
-
-TSOBS = core.o inflow.o dep.o
-
-NTSOBS = standalone.o
-
-TSSTART = /lib/crt0.o
-
-NTSSTART = kdb-start.o
-
-gdb : $(OBS) $(TSOBS) $(ADD_DEPS)
-	-rm -f init.c
-	./munch $(OBS) $(TSOBS) > init.c
-	${CC-LD} $(LDFLAGS) -o gdb init.c $(OBS) $(TSOBS) $(CLIBS)
-
-xgdb : $(OBS) $(TSOBS) xgdb.o $(ADD_DEPS)
-	-rm -f init.c
-	./munch $(OBS) $(TSOBS) xgdb.o > init.c
-	$(CC-LD) $(LDFLAGS) -o xgdb init.c $(OBS) $(TSOBS) xgdb.o \
-	-lXaw -lXt -lX11 $(CLIBS)
-
-kdb : $(NTSSTART) $(OBS) $(NTSOBS) $(ADD_DEPS)
-	-rm -f init.c
-	./munch $(OBS) $(NTSOBS) > init.c
-	$(CC-LD) $(LDFLAGS) -c init.c $(CLIBS)
-	ld -o kdb $(NTSSTART) $(OBS) $(NTSOBS) init.o -lc $(CLIBS)
-
-# If it can figure out the appropriate order, createtags will make sure
-# that the proper m-*, *-dep, *-pinsn, and *-opcode files come first
-# in the tags list.  It will attempt to do the same for dbxread.c and 
-# coffread.c.  This makes using M-. on machine dependent routines much 
-# easier.
-#
-TAGS: ${TAGFILES}
-	createtags ${TAGFILES}
-tags: TAGS
-
-gdb.tar: ${TARFILES}
-	rm -f gdb.tar
-	mkdir dist-gdb
-	cd dist-gdb ; for i in ${TARFILES} ; do ln -s ../$$i . ; done
-	tar chf gdb.tar dist-gdb
-	rm -rf dist-gdb
-
-gdb.tar.Z: gdb.tar
-	compress gdb.tar
-
-clean:
-	-rm -f ${OBS} ${TSOBS} ${NTSOBS} ${OBSTACK} ${REGEX}
-	-rm -f init.c init.o 
-	-rm -f gdb
-
-realclean: clean
-	-rm -f expread.tab.c tags TAGS
-
-xgdb.o : xgdb.c defs.h param.h symtab.h frame.h
-	$(CC) -c $(CFLAGS) xgdb.c -o $@
-
-expread.tab.c : expread.y
-	@echo 'Expect 101 shift/reduce conflicts and 1 reduce/reduce conflict.'
-	yacc expread.y
-	mv y.tab.c expread.tab.c
-
-expread.o : expread.tab.c defs.h param.h symtab.h frame.h expression.h
-	$(CC) -c ${CFLAGS} expread.tab.c
-	mv expread.tab.o expread.o
-
-#
-# Only useful if you are using the gnu malloc routines.
-#
-malloc.o : malloc.c
-	${CC} -c ${MALLOC_FLAGS} malloc.c
-
-#
-# dep.o depends on ALL the dep files since we don't know which one
-# is really being used.
-#
-dep.o : ${DEPFILES} defs.h param.h frame.h inferior.h obstack.h \
-	a.out.encap.h
-
-# pinsn.o depends on ALL the opcode printers
-# since we don't know which one is really being used.
-pinsn.o : ${PINSNS} defs.h param.h symtab.h obstack.h symseg.h frame.h \
-	  ${OPCODES}
-
-#
-# The rest of this is a standard dependencies list (hand edited output of
-# cpp -M).  It does not include dependencies of .o files on .c files.
-#
-blockframe.o : defs.h param.h symtab.h obstack.h symseg.h frame.h 
-breakpoint.o : defs.h param.h symtab.h obstack.h symseg.h frame.h
-coffread.o : defs.h param.h 
-command.o : command.h defs.h
-core.o : defs.h  param.h a.out.encap.h
-dbxread.o : param.h defs.h symtab.h obstack.h symseg.h a.out.encap.h \
-	    stab.gnu.h
-environ.o : environ.h 
-eval.o : defs.h  param.h symtab.h obstack.h symseg.h value.h expression.h 
-expprint.o : defs.h symtab.h obstack.h symseg.h param.h expression.h
-findvar.o : defs.h param.h symtab.h obstack.h symseg.h frame.h value.h 
-infcmd.o : defs.h  param.h symtab.h obstack.h symseg.h frame.h inferior.h \
-	   environ.h value.h
-inflow.o : defs.h  param.h frame.h inferior.h
-infrun.o : defs.h  param.h symtab.h obstack.h symseg.h frame.h inferior.h \
-	   wait.h
-kdb-start.o : defs.h param.h 
-main.o : defs.h  command.h param.h
-malloc.o :  getpagesize.h
-obstack.o : obstack.h 
-printcmd.o :  defs.h param.h frame.h symtab.h obstack.h symseg.h value.h \
-	      expression.h 
-regex.o : regex.h 
-remote.o : defs.h  param.h frame.h inferior.h wait.h
-source.o : defs.h  symtab.h obstack.h symseg.h param.h
-stack.o :  defs.h param.h symtab.h obstack.h symseg.h frame.h 
-standalone.o : defs.h param.h symtab.h obstack.h symseg.h frame.h \
-	       inferior.h wait.h 
-symmisc.o : defs.h symtab.h obstack.h symseg.h obstack.h 
-symtab.o : defs.h  symtab.h obstack.h symseg.h param.h  obstack.h
-utils.o : defs.h  param.h 
-valarith.o : defs.h param.h symtab.h obstack.h symseg.h value.h expression.h 
-valops.o :  defs.h param.h symtab.h obstack.h symseg.h value.h frame.h \
-	    inferior.h
-valprint.o :  defs.h param.h symtab.h obstack.h symseg.h value.h 
-values.o :  defs.h param.h symtab.h obstack.h symseg.h value.h 
-
-robotussin.h : getpagesize.h   
-symtab.h : obstack.h symseg.h 
-a.out.encap.h : a.out.gnu.h