Initial creation of sourceware repositorygdb-4_18-branchpoint

1 files changed, 7122 insertions, 0 deletions

diff --git a/gdb/ChangeLog-98 b/gdb/ChangeLog-98
new file mode 100644
index 0000000..bd19b49
--- /dev/null
+++ b/gdb/ChangeLog-98
@@ -0,0 +1,7122 @@
+Thu Dec 31 15:26:13 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* corelow.c (core_ops): Don't initialize statically.
+	(init_core_ops): New function, fills in core_ops.
+	(_initialize_corelow): Use it.
+
+Thu Dec 31 16:54:30 1998  David Taylor  <taylor@texas.cygnus.com>
+
+	The following changes were made by
+	Elena Zannoni <ezannoni@kwikemart.cygnus.com>
+	Edith Epstein  <eepstein@sophia.cygnus.com>
+	David Taylor  <taylor@texas.cygnus.com>
+
+	* config/pa/tm-hppa.h (INSTRUCTION_NULLIFIED): Change to read
+ 	nullify instruction bit from IPSW only when we are not in a system
+ 	call.
+	(STRCAT_REGISTER, pa_do_strcat_registers_info): Additional
+ 	parameter -- precision.
+
+	* Makefile.in (BUILD_TUI): To build the tui, only when configured
+	with --enable-tui.
+	(YLWRAP): Use ylwrap to avoid problems on systems w/o bison.
+	(gdb$(EXEEXT)): Make it dependent on BUILD_TUI.
+	(all-tui): Remove dependency from phony target.
+	(c-exp.tab.c): Use ylwrap instead of bison.
+	(jv-exp.tab.c): Ditto.
+	(f-exp.tab.c): Ditto.
+	(m2-exp.tab.c): Ditto.
+
+	* configure.in (ENABLE_CFLAGS): Define and export BUILD_TUI.
+	
+	* configure: Regenerated.
+
+	* c-typeprint.c (c_type_print_base): Get to the method name by
+	skipping over all the namespaces,  classes and '::'.
+
+	* infcmd.c (run_command): Only call SOLIB_RESTART if it's
+	defined.
+	(detach_command): Ditto.
+
+	* infptrace.c (call_ptrace): Add some debugging code.
+
+	* infrun.c (follow_inferior_fork): Only define on HP.
+	(wait_for_inferior): Only call SOLIB_IN_DYNAMIC_LINKER if we have
+	shared libraries; restore test of IN_SOLIB_DYNSYM_RESOLVE_CODE
+	removed by HP.
+	
+	* Makefile.in (ALLDEPFILES): Add somread.c, hp-psymtab-read.c,
+	hp-symtab-read.c.
+	(SFILES): Remove the above files
+	(COMMON_OBS): Remove somread.o
+	(SFILES): Add the tui files to this, so they get
+	included in etags tables.
+	(all-tui): New rule, which does a recursive make in the tui
+ 	subdir.
+	(gdb$(EXEEXT)): Add tui-all to the list of
+ 	dependencies, and add tui/libtui.a to the link list.
+	(tui/libtui.a): When recursing, pass down
+	${FLAGS_TO_PASS}.  And don't echo the make command.  This is
+	closer to what the other recursions do.
+	(HFILES_NO_SRCDIR) add hpread.h.
+	(COMMON_OBS): Add hp-psymtab-read.o, hp-symtab-read.o
+	Allow the TUI code to be conditionally enabled.
+	(TUI_TARGET, TUI_LIBRARY): New variables, whose values are set by
+	the configuration script.  They're set to the empty string when
+	the TUI isn't enabled.
+	(gdb$(GDBEXT)): Use those, instead of referring to tui-all and
+	tui/libtui.a directly.
+
+	* Makefile.in: Avoid spurious relinking.
+	(gdb$(EXEEXT)): Depend on the actual tui library, not on a
+	fictitious target.  Since the fictitious target never existed, make
+	would always relink.
+	(tui/libtui.a): Renamed from all-tui.  Always recurse to make sure
+	the library is up to date.
+	(TUI_TARGET): Variable removed; there's no need for it any more.
+
+	* Makefile.in: Look for tui include files in the tui source dir.
+
+	* Use automake's `aclocal' program to generate aclocal.m4, to allow
+	us to use automake macros in configure.in with impunity.
+
+	* acconfig.h: Add an entry for the `TUI' symbol.
+
+	* acinclude.m4: New file, containing the code from the old
+	aclocal.m4.  Incorporate (by reference) ../bfd/acinclude.m4, not
+	../bfd/aclocal.m4, since we only want bfd's local macros.
+
+	* aclocal.m4: Now automagically generated.  Just run aclocal!
+	
+	* annotate.c (annotate_catchpoint): New function.
+
+	* annotate.h: Taking the new includes (symtab.h and gdbtypes.h).
+	not taking the ansic C build fix.
+	(annotate_catchpoint): Declare.
+
+	* blockframe.c (blockvector_for_pc_sect): Check that the end of
+ 	the block is >= to the pc, not just >.
+
+	* breakpoint.c (create_temp_exception_breakpoint): #If it out --
+ 	nothing calls it.
+	(bpstat_stop_status): Don't call SOLIB_HAVE_LOAD_EVENT if it's not
+ 	defined; don't call SOLIB_HAVE_UNLOAD_EVENT if it's not defined.
+	(bpstat_get_triggered_catchpoints): If we don't have shared
+ 	library support, then don't call SOLIB_LOADED_LIBRARY_PATHNAME nor
+ 	SOLIB_UNLOADED_LIBRARY_PATHNAME.
+	(watch_command_1): Don't require a run before a watch command
+ 	unless we're on HP [it's an HP OS bug, not a generic limitation]
+	(catch_load_command_1): Don't define if no shared libraries.
+	(catch_command_1): Don't claim to support fork catchpoints unless
+ 	CHILD_INSERT_FORK_CATCHPOINT is defined, don't claim to support
+ 	vfork catchpoints unless CHILD_INSERT_VFORK_CATCHPOINT is defined,
+ 	don't clain to support shared library load catchpoints if shared
+ 	libraries aren't supported, and don't claim to support exec
+ 	catchpoints unless CHILD_INSERT_EXEC_CATCHPOINT is defined
+
+	(bpstat_do_actions): If we just set cmd to NULL, don't then try to
+ 	set it to cmd->next as we'll SEGV.
+	(bpstat_do_actions): Simplify significantly.  It's
+	now almost as simple as before the merge and it no longer has the
+	HP bug that breakpoint commands are executed repeatedly.
+
+	(break_at_finish_command_1): Rewrite and make sure
+ 	selected_frame points to a frame before using it. Fix string
+ 	termination error.
+	(break_at_finish_at_depth_command_1): Ditto.
+	
+	(can_use_hw_watchpoints): New static variable.
+	(read_memory_nobpt): Test for breakpoint type bp_none.
+	(insert_breakpoints): Test for breakpoint type bp_catch_exec;
+	insure have a current frame before getting the frame address.
+	(remove_breakpoints): Check for breakpoints of types bp_none,
+	bp_catch_fork, bp_catch_vfork, and bp_catch_exec.
+	(bpstat_stop_status): Fix updates of b->hit_count.
+	(bpstat_have_active_hw_watchpoints): New function.
+	(create_exec_event_watchpoint): New function.
+	(watch_command_1): Use can_use_hw_watchpoints.
+	(catch_fork_command_1): Change name of function to call from
+	target_create_catch_(v)fork_hook to create_(v)fork_even_catchpoint.
+	(delete_breakpoint): Test for already deleted breakpoints; add
+	support for bp_catch_fork, bp_catch_vfork, and bp_catch_exec
+	breakpoints.
+	(_initialize_breakpoint): Add can-use-hw-watchpoints to list of
+	user settable debugger variables.
+
+	(clear_command): When there is no argument
+	to the clear command, delete all breakpoints that are hit at 
+	default line. This will include a breakpoint whose line number
+	does not correspond to the default line, but has been set at 
+	the default address.
+
+	(delete_breakpoint): Don't call bpstat_clear_actions, instead
+ 	clear things explicitly; if clearing breakpoint_at, then also
+ 	clear any associated actions so that bpstat_do_actions won't try
+ 	to execute them.
+	(_initialize_breakpoint): Fix function name for bx command.
+
+	(tbreak_command): Remove static from declaration.
+	(maintenance_info_breakpoints): Ditto.
+
+	(reattach_breakpoints): New funct definition, used with with
+ 	hardware watchpoints
+	(breakpoint_1): Change format and add entries to bptypes[]
+	(maintenance_info_breakpoints): Function is no longer static
+
+	(_initialize_breakpoint): Removed a comment.
+	(exception_catchpoints_are_fragile,
+ 	exception_support_initialized): Define.
+	(breakpoint_here_p): Fixed syntax error in conditional
+	(disable_watchpoints_before_interactive_call_start): Fixed call to
+ 	check_duplicates. Need a section parameter.
+	(enable_watchpoints_after_interactive_call_stop): Fixed call to
+ 	check_duplicates. Need a section parameter.
+	(breakpoint_re_set_one): Fixed call to check_duplicates. Need a
+ 	section parameter.
+	(delete_command): Fixed syntax error in conditional
+	(breakpoint_re_set): Fixed some typos.
+	
+	(args_for_catchpoint_enable): New type for handling exceptions.
+	(current_exception_event): New variable for handling exceptions.
+	(insert_breakpoints): Check for additional breakpoint types --
+	bp_catch_throw, bp_catch_catch, call_disabled.  Also, do some
+	additional work to handle an exception catchpoint.
+	(remove_breakpoint): There are additional breakpoint types to
+ 	check for: Bp_catch_throw, bp_catch_catch, call_disabled. Also do
+ 	some additional work to remove the exception catchpoints
+	(breakpoint_init_inferior): New input parameter. If there are
+ 	exception catchpoints delete them.
+	(breakpoint_here_p): There are additional breakpoint enable
+ 	settings to check for: Shlib_disabled, call_disabled
+	(breakpoint_thread_match): There are additional breakpoint enable
+ 	settings to check for: Call_disabled
+	(ep_is_catchpoint): There are additional breakpoint types to check
+ 	for: Bp_catch_throw, bp_catch_catch
+	(ep_is_exception_catchpoint): New function
+	(bpstat_find_step_resume_breakpoint): New function
+	(bpstat_do_actions): Introduce a local copy of the bpstat
+ 	structure.
+	(print_it_normal): There are additional breakpoint types to check
+ 	for: Bp_catch_throw, bp_catch_catch Changeing the control
+ 	structure a bit (adding else ifs) Add code to print out info about
+ 	exceptions.
+	(bpstat_stop_status): There are additional breakpoint enable
+ 	settings to check for: Call_disabled. there are additional
+ 	breakpoint types to chack for: Bp_catch_catch and bp_catch_throw.
+  	Check to see if stopped due to an exception. Minor fixes to the
+ 	catch_errors calls. Make sure to count all encountered
+ 	breakpoints. There was something funky going on previously with
+ 	the counting.
+	(bpstat_what): Add cases for new breakpoint types:
+ 	bp_catch_catch, bp_catch_throw.
+	(bpstat_get_triggered_catchpoints): Check for new breakpoint types
+ 	: Bp_catch_catch, bp _catch_throw.
+	(breakpoint_1): Account for new breakpoint types.
+	(describe_other_breakpoints): Account for new breakpoint enable
+ 	setting (call_disabled)
+	(check_duplicates): Account for new breakpoint enable setting
+ 	(call_disabled)
+	(disable_breakpoints_in_shlibs): New function
+	(disable_watchpoints_before_interactive_call_start): New function
+	(mention): Account for new breakpoint types.
+	(break_command_1): Some additional checking for a valid PC.
+	(watch_command_1): Some dditional checking to prevent a watch
+ 	before a run command.
+	(ep_parse_optional_filename): Simplified for loop.
+	(create_exception_catchpoint): New function
+	(cover_target_enable_exception_callback): New function
+	(handle_gnu_4_16_catch_command): This used to be thcatch_command_1
+ 	function.e
+	(create_temp_exception_breakpoint): New function
+	(catch_command_1): Differs from gdb 4.16 and gdb 4.17. Is now
+ 	calling catch_exception_command_1 using the EX_EVENT_CATCH and
+ 	EX_EVENT_THROW values as parameters.
+	(clear_command): Additional comments
+	(delete_breakpoint): Handle exceptions. Check for additional
+ 	breakpoint enable settings: Shlib_disabled, call_disabled.
+	(delete_command): Hp folks are claiming that we should not delete
+ 	shlib_event breakpoints
+	(breakpoint_re_set_one): Moved call to check_duplicates.  Add new
+ 	breakpoint types to switch statement.
+	(breakpoint_re_set_thread): New function
+	(enable_command): Account for new breakpoint types.
+
+	(insertion_state_t): New enumerated type.
+	(remove_breakpoint): New param in funct prototype.
+	(insert_breakpoints): Check for bp_catch_fork and bp_catch_vfork.
+	(remove_breakpoints): Changed call to remove_breakpoint.
+	(detach_breakpoints): New function.
+	(remove_breakpoint): New parameter, is. Also changed the
+	way b->inserted is set.
+	(ep_is_catchpoint): New function.
+	(ep_is_shlib_catchpoint): New function.
+	(print_it_normal): Check for bp_catch_load, bp_catch_unload, 
+	bp_catch_fork, bp_catch_vfork, bp_catch_exec. Also new code 
+	to print out catchpoints properly.
+	(bpstat_stop_status): Check for bp_catch_fork, bp_catch_vfork,
+	and bp_catch_exec. Also, some code to check for catching a 
+	shared library load/unload.
+	(bpstat_what): Added catch_shlib_event to class enumeration.
+	Defined new macro, shlr. Expanded the bpstat_what_main_action
+	table. Add cases for bp_catch_load, bp_catch_unload, 
+	bp_catch_fork, bp_catch_vfork, and bp_catch_exec.
+	(bpstat_get_triggered_catchpoints): New function.
+	(breakpoint_1): Changes to bptypes definition. Also check for
+	bp_catch_load, bp_catch_unload, bp_catch_fork, bp_catch_vfork,
+	bp_catch_exec. Similar changes to the switch statement.
+	(set_raw_breakpoint): Initialize new breakpoint structure fields.
+	dll_pathname, triggered_dll_pathname, forked_inferior_pid,
+	exec_pathname.
+	(create_solib_load_unload_event_breakpoint): New function.
+	(create_solib_load_event_breakpoint): New function.
+	(create_solib_unload_event_breakpoint): New function.
+	(create_fork_vfork_event_catchpoint): New function.
+	(create_fork_event_catchpoint): New function.
+	(create_vfork_event_catchpoint): New function.
+	(mention): New cases for bp_catch_load, bp_catch_unload, 
+	bp_catch_fork, bp_catch_vfork, bp_catch_exec.
+	(ep_skip_leading_whitespace): New function.
+	(ep_find_event_name_end): New function.
+	(ep_parse_optional_if_clause): New function.
+	(ep_parse_optional_filename): New function.
+	(catch_fork_kind): New enumerated type.
+	(catch_fork_command_1): New function.
+	(catch_exec_command_1): New function.
+	(catch_load_command_1): New function.
+	(catch_unload_command_1): New function.
+	(catch_throw_command_1): New function.
+	(catch_command_1): Now calls catch_throw_command_1.
+	(tcatch_command): New function.
+	(delete_breakpoint): Changed call to remove_breakpoint.
+	Also free the new fields in the breakpoint structure.
+	(breakpoint_re_set_one): Handle bp_catch_load, bp_catch_unload,
+	bp_catch_fork, bp_catch_vfork, bp_catch_exec.
+	(disable_command): Handle bp_catch_load, bp_catch_unload,
+	bp_catch_fork, bp_catch_vfork, bp_catch_exec.
+	(enable_command): Handle bp_catch_load, bp_catch_unload,
+	bp_catch_fork, bp_catch_vfork, bp_catch_exec.
+	(_initialize_breakpoint): Alter add_com call for catchpoints,
+	add add_com call for watchpoints.
+
+	* breakpoint.h (enum bptype): New entries bp_catch_catch,
+ 	bp_catch_throw, and bp_none, bp_catch_load, bp_catch_unload,
+ 	bp_catch_fork, bp_catch_vfork,bp_catch_exec.  Add declarations for
+ 	new functions bpstat_have_active_hw_watchpoints and
+ 	create_exec_event_catchpoint.
+	(tbreak_command): Add prototype.
+	(update_breakpoints_after_exec): Add prototype; update comments.
+	(reattach_breakpoints): New funct prototype declaration.
+	(enable): New enumerated value call_disabled.
+	(bpstat_find_step_resume_breakpoint): New funct decl.
+	(inf_context): New enumerated type.
+	(breakpoint_re_set_thread): New funct decl.
+	(breakpoint_init_inferior): New parameter.
+	(disable_watchpoints_before_interactive_call_start): New funct decl.
+	(enable_watchpoints_after_interactive_call_stop): New funct decl.
+	(disable_breakpoints_in_shlibs): New funct decl.
+  	(struct breakpoint): New fields, dll_pathname,triggered_dll_pathname,
+ 	forked_inferior_pid,exec_pathname BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK.
+	(bpstat_get_triggered_catchpoints): New function.
+	(detach_breakpoints): New function.
+	(create_solib_load_event_breakpoint): New function.
+	(create_solib_unload_event_breakpoint) New function.
+	(create_fork_event_catchpoint): New function.
+	(create_vfork_event_catchpoint): New function.
+	(ep_is_catchpoint): New function.
+	(ep_is_shlib_catchpoint) New function.
+ 	(enum bpstat_what_main_action): New entry.
+
+	* buildsym.c (finish_block): Get rid of processing_hp_compilation;
+ 	handle LOC_INDIRECT case.  Set the BLOCK_GCC_COMPILED to the right
+ 	compiler.
+	(push_context): Add symbols for parameters to the context_stack.
+	(merge_symbol_lists): New function. Merges two symbol lists.
+	(struct context_stack): Add new field param.
+
+	(processing_hp_compilation): New external var.
+
+	* c-exp.y: Use external flag hp_som_som_object_present to decide
+ 	whether code was compiled by HP's compilers.  Add two new C++
+ 	tokens for true and false.
+	(yylex): Check for template name is done differently for the
+ 	HP/aCC compiler case; change some of the template processing code
+ 	for handling HP aCC templates.
+
+	* c-lang.c (c_create_fundamental_type): Added case to handle
+ 	template args.  Handle FT_BOOLEAN type.  Set no sign flag for
+ 	FT_CHAR.
+	(cplus_builtin_types): New structure for c++ builtin types.
+	(cplus_language_defn): Use cplus_builtin_types instead of
+ 	c_builtin_types.
+
+	* c-typeprint.c (c_type_print_base): Don't print 'privete' label
+ 	for a class if all members are private, similarly don't print
+ 	'public' for a struct.  Add support for sized enums (HP/aCC).  get
+ 	rid of the 'static' keyword printed by the demangler for member
+ 	function, when printing the type of a class. 'static' will be
+ 	added by this function.  If the demangled name is null, and the
+ 	method is not stubbed, get the signature by looking at the
+ 	information stored in the symbol structure.  Remove printing of
+ 	'const' and 'volatile' keywords for methods. This is now taken
+ 	care as part of the demangled member names.
+	(cp_type_print_method_args): New function. To print a C++ method
+ 	arguments and name to the output stream.
+
+	(c_type_print_cv_qualifier): New function. Print out "const" and
+ 	"volatile" attributes.
+	(c_type_print_varspec_prefix): Print const or volatile qualifiers.
+	(c_type_print_args): Print 'void' for c++.
+	(c_type_print_varspec_suffix): Print 'void' for a no argument
+ 	function.
+	(c_type_print_base): Print const or volatile qualifiers.  Do not
+ 	print 'unnamed union' if HP aCC compiler used.  Distinguish
+ 	between struct and class based on the DECLARED_TYPE.  Handle
+ 	HP/aCC compiler case for not printing vtable.  Add Template
+ 	support.
+
+	(cp_type_print_derivation_info): Print out 'protected' when
+ 	appropriate. This applies only to HP's compilers, not gcc.
+
+	(c_val_print): Added parameter embedded_offset.  Add
+ 	embedded_offset to valaddr in function calls; fix calls to
+ 	val_print and cp_print_value_fields.  process TYPE_CODE_METHOD as
+ 	well.  moved call to check_typedef out of conditional.  added
+ 	embedded offset param to val_print call.
+
+	(c_value_print): Add new parameter to call to val_print.
+	handle pointer to class case.  Attempt to
+ 	determine the real type of the object to be printed.
+	ensure that const char *, const unsigned char *
+	come out without the type but the volatile variants
+	and the signed variants don't.
+
+	* coff-solib.c (coff_solib_add): Add parameters to call
+	to symbol_file_add.
+
+	* coff-solib.h: (Solib_REMOVE_INFERIOR_HOOK): New macro. defined
+ 	to 0.  functionality not implemented for coff.
+	(SOLIB_CREATE_CATCH_LOAD_HOOK): New macro, generate error message
+ 	for coff.
+	(SOLIB_CREATE_CATCH_UNLOAD_HOOK): Ditto.
+	(SOLIB_HAVE_LOAD_EVENT): Ditto.
+	(SOLIB_LOADED_LIBRARY_PATHNAME): Ditto.
+	(SOLIB_HAVE_UNLOAD_EVENT): Ditto.
+	(SOLIB_UNLOADED_LIBRARY_PATHNAME): Ditto.
+	(SOLIB_IN_DYNAMIC_LINKER): Ditto.
+	(SOLIB_RESTART): Ditto.
+
+	* command.c (find_cmd): New function.  (lookup_cmd_1): Call it,
+ 	change parsing if tui_version or xdb_commands is set.
+  	(_initialize_command): Install new alias if xdb_commands is set.
+
+	* complaints.h: Add ifdef...endif pair at beginning and end of file.
+	
+	* config.in, configure: Regenerated.
+
+	* config/pa/hppabsd.mh (NATDEPFILES): Added new files 
+	hp-psymtab-read.o and hp-symtab-read.o.
+	* config/pa/hppahpux.mh (NATDEPFILES): Ditto.
+
+	* config/pa/hppahpux.mh (TERMCAP): Use -lHcurses.
+	* config/pa/hppaosf.mh (NATDEPFILES): Ditto.
+
+	* config/pa/hpux1020.mh (TERMCAP): Use -lHcurses.
+	(MH_CFLAGS): New flag, -D__HP_CURSES, this define
+	is used by HP's linker to find the correct curses library.
+
+	* config/pa/hpux1020.mh: New file.
+
+	* config/pa/hpux1020.mt: New file.
+
+	* config/pa/hpux1100.mh (TERMCAP): Link against -lcurses, not
+	-lHcurses.  The latter does not contain mvwaddstr, wscrl, or
+	wstbwlmkfzz.
+
+	* config/pa/hpux1100.mh (TERMCAP): Use -lHcurses.
+	(MH_CFLAGS): New flag, -D__HP_CURSES, this define
+	is used by HP's linker to find the correct curses library.
+
+	* config/pa/hpux1100.mh (TERMCAP): When hosting on hpux 11.00, use
+	-lHcurses rather than -lcurses.
+
+	* config/pa/hpux1100.mh: New file.
+
+	* config/pa/hpux1100.mt: New file.
+
+	* config/pa/nm-hppah.h (CHILD_HAS_SYSCALL_EVENT): New macro
+	(CHILD_THREAD_ALIVE): New macro
+	(STOPPED_BY_WATCHPOINT): Add a condition to the macro, 
+	! stepped_after_stopped_by_watchpoint
+	(TARGET_ENABLE_HW_WATCHPOINTS): New macro
+	(hppa_enable_hw_watchpoints): New funct decl
+	(TARGET_DISABLE_HW_WATCHPOINTS): New macro
+	( hppa_disable_hw_watchpoints): New funct decl
+	     these are for HP's implementation of fast 
+	watchpoints (via page protection).
+	(target_pid_to_str): New macro, calls hppa_pid_to_str
+	(target_tid_to_str): New macro, calls hppa_tid_to_str
+
+	* config/pa/nm-hppah.h (CHILD_POST_WAIT): Delete;
+	(CHILD_CREATE_CATCH_FORK_HOOK): Replace with
+ 	CHILD_INSERT_FORK_CATCHPOINT and CHILD_REMOVE_FORK_CATCHPOINT.
+	(CHILD_CREATE_CATCH_VFORK_HOOK): Replace with
+ 	CHILD_INSERT_VFORK_CATCHPOINT and CHILD_REMOVE_VFORK_CATCHPOINT.
+	(CHILD_CAN_FOLLOW_VFORK_PRIOR_TO_EXEC,
+ 	CHILD_INSERT_EXEC_CATCHPOINT, CHILD_REMOVE_EXEC_CATCHPOINT,
+ 	CHILD_HAS_EXECD, CHILD_REPORTED_EXEC_EVENTS_PER_EXEC_CALL,
+ 	CHILD_POST_ATTACH, TARGET_HAS_HARDWARE_WATCHPOINTS,
+	TARGET_CAN_USE_HARDWARE_WATCHPOINT,
+	TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT,
+	TARGET_RANGE_PROFITABLE_FOR_HW_WATCHPOINT, STOPPED_BY_WATCHPOINT,
+	HAVE_NONSTEPPABLE_WATCHPOINT, target_insert_watchpoint,
+	target_remote_watchpoint): New macros.
+
+	* config/pa/nm-hppah.h (CHILD_XFER_MEMORY): Reinsert accidentally
+	deleted define.
+
+	* config/pa/nm-hppah.h:
+	(PREPARE_TO_PROCEED): Defined macro to use 
+	hppa_prepare_to_proceed.
+	(hppa_pid_to_str): Extern decl.
+	(hppa_tid_to_str): Extern decl.
+	(target_pid_or_tid_to_str): New macro definition.
+	(hppa_pid_or_tid_to_str): Extern decl.
+	(ENSURE_VFORKING_PARENT_REMAINS_STOPPED): New macro - for
+	handling events caused by a call to vfork.
+	(hppa_ensure_vforking_parent_remains_stopped): Extern decl.
+	(RESUME_EXECD_VFORKING_CHILD_TO_GET_PARENT_VFORK): New macro -
+	for handling events caused by a call to vfork.
+	(hppa_resume_execd_vforking_child_to_get_parent_vfork): Extern decl.
+
+	* config/pa/nm-hppah.h: Fix PREPARE_TO_PROCEED macro.
+
+	* config/pa/nm-hppah.h: Fix for gcc compile on HPUX, change
+ 	PT_RDUAREA to PT_RUAREA.
+
+	* config/pa/nm-hppah.h: Introduced an HPUXHPPA define.
+	A bit of a hack so that I can ifdef some code that 
+	only works for the HP wildebeest debugger.
+
+	* config/pa/nm-hppah.h: Lots of new CHILD_ defines;
+	process_event_kind enum.
+
+	* config/pa/tm-hppa.h (BREAKPOINT32): New define.
+	(CALL_DUMMY_HAS_COMPLETED): New define.
+
+	* config/pa/tm-hppa.h (STACK_ALIGN): New macro.
+	(NO_EXTRA_ALIGNMENT_NEEDED): New macro.
+	(PC_REQUIRES_RUN_BEFORE_USE): New macro. 
+	(REGISTER_NAMES): Formatting in file changed.
+	(CR27_REGNUM): Base register for thread local storage. 
+	(USE_STRUCT_CONVENTION): New macro used to decide whether
+	a function returning a value of type type will
+	put it on the stack or into registers (based on the 
+	PA risc calling conventions).
+	(EXTRACT_RETURN_VALUE): Fixed calculation for extracting return value.
+	(VALUE_RETURNED_FROM_STACK): New macro.
+	(TARGET_READ_PC): Declared the function used in the definition.
+	(SKIP_TRAMPOLINE_CODE): Declared the function used in the definition.
+	(TARGET_WRITE_PC): Declared the function used in the definition.
+	(TARGET_READ_FP): Declared the function used in the definition.
+
+	* config/pa/tm-hppa.h (STRCAT_REGISTER): Define macro for 
+	future use.
+	(pa_do_strcat_registers_info): Moved function decl from
+	defs.h to this HPUX specific .h file.
+
+	* config/pa/tm-hppa.h (USE_STRUCT_CONVENTION): Type_LENGTH returns
+	bytes, not bits; fix off by 8 error.
+
+	* config/pa/tm-hppa.h: 
+	New comment for obj_unwind_info definition
+	New typedef, obj_private_struct
+
+	* config/pa/tm-hppa.h: Delete most target_ macros -- use default
+	versions instead; remove extraneous comma from proc_wait macro.
+
+	* config/pa/tm-hppa.h: Get rid of macro HP_COMPILED_TARGET.
+
+	* config/pa/tm-hppa.h: Removed redefinitions of 
+	USE_STRUCT_CONVENTION and STACK_ALIGN macros.
+	
+	* config/pa/tm-hppa.h: Some new definitions
+	  New macros: Arg0_REGNUM, ARG1_REGNUM, ARG2_REGNUM, ARG3_REGNUM.
+	    target_pid_to_exec_file, target_acknowledge_forked_child,
+	    target_create_catch_fork_hook, target_create_catch_vfork_hook,
+	    target_has_forked, target_has_vforked, require_attach, 
+	    require_detach, proc_wait
+	  New funct decls: Hppa_pid_to_exec_file,
+	    hppa_acknowledge_forked_child, hppa_create_catch_fork_hook,
+	    hppa_create_catch_vfork_hook, hppa_target_has_forked, 
+	    hppa_target_has_vforked, hppa_require_attach, 
+	    hppa_require_detach, process_wait
+	  (unwind_table_entry): Added comments to describe struct fields.
+
+	* config/pa/tm-hppah.h (somsolib.h): Include it.
+
+	* config/pa/tm-hppah.h: 
+	(CHILD_ENABLE_EXCEPTION_CALLBACK): New define
+	(CHILD_GET_CURRENT_EXCEPTION_EVENT): New define
+
+	* configure.host (hppa-*-hpux10.20, hppa-*-hpux11.0*): New configs.
+
+	* configure.in (AC_CHECK_HEADERS): Add check for term.h.
+	
+	* configure.in: Add an --enable-tui argument.
+
+	* configure.in: Construct tui/Makefile from tui/Makefile.in.
+
+	* configure.in: Use AM_PROG_CC_STDC.  If we have the GUI, then we
+	need this to process libgui.h.
+
+	* convex-tdep.c (decout): Change FILE to GDB_FILE.
+
+	* corefile.c: Include objfiles.h, symfile.h.
+	(core_file_command): Attempt to determine the name of the symbol
+	file from the core file.
+	(read_memory_string): New function.
+	
+	* corefile.c (core_file_command): Temporary hack to make non-hpux
+ 	work. For, non-hpux, t->to_core_file_to_sym_file does not have a
+ 	reasonable value. No target_ops vector on the stack gives it a
+ 	non-zero value. fix later.
+
+	* corelow.c (core_file_to_sym_file): Added new local variable,
+ 	failing command, and do some explicit type castings.
+	(core_ops): Add three new fields: to_has_syscall_event,
+	to_enable_exception_callback, to_get_current_exception_event.
+ 	Necessary since we still have oldstyle initialization in
+	this file
+
+	* corelow.c: Include unistd.h
+	(core_file_to_sym_file): New function 
+	(core_file_thread_alive): New function
+	(core_ops): Added new target ops vector fields. see below. And
+	  yes we definitiely need to initialize them here, as long as
+	  we're using static initialization.
+
+	* cxux-nat.c (add_shared_symbol_files): Additonal params for calls
+ 	to symbol_file_add.
+
+	* defs.h (gdb_file_isatty): New function decl.
+
+	* defs.h (GDB_FILE): If TUI is defined, define a structure rather
+ 	than making this an alias for FILE.
+	(gdb_stdout, gdb_stderr): If TUI is defined, then define these
+	as pointers to variables of type GDB_FILE rather than making them
+	be aliases for stdout and stderr.
+
+	* defs.h (TUIDO): Add definition conditionalized on definition
+	(or lack thereof) of TUI.
+
+	* defs.h (command_class): Add two additional values.
+	(precision_type): New enum.
+
+	* defs.h (gdb_fclose): Add declaration.
+
+	* defs.h (store_address): Change prototype to match function.
+
+	* defs.h (tui_version, xdb_commands, dbx_commands): Add decl's.
+
+	* defs.h (gdb_file_deallocate): New function declaration
+
+	* defs.h: 
+	(streamtype): New enumerated type to distinguish between
+	output to a FILE and output to a buffer.
+	(tui_stream): New struct type, named GDB_FILE. Contains,
+	 streamtype, FILE, buffer, and bufferlength fields.
+	(gdb_stdout): Of type GDB_FILE, will pass this around gdb
+	rather than stdout.
+	(gdb_stderr): Of type GDB_FILE, will pass this around gdb
+	rather than stderr.
+	(fputs_unfiltered_hook): Change stream parameter from FILE to
+	GDB_FILE
+	(flush_hook): Change stream parameter from FILE to GDB_FILE
+	(gdb_fclose): Fix declaration for gdb_fclose; parameter is now of 
+	type GDB_FILE **
+	(gdb_file_adjust_strbuf): New function declaration. function lives in
+	utils.c.
+	(gdb_file_init_astring): New function declaration. function lives
+	in utils.c
+	(gdb_file_get_strbuf): New function declaration. function lives
+	in utils.c
+	
+	* defs.h: Additional include files included when TUI is defined.
+
+	* defs.h: Funct decl source_full_path_of.
+
+	* demangle.c: Add HP_DEMANGLING_STYLE_STRING.
+
+	* demangle.c: Added new demangling style, EDG_DEMANGLING_STYLE_STRING,
+	  to the demanglers structure. This is for support of 
+	  Kuck & Assoc.'s changes for demangling.
+
+	* eval.c (evaluate_subexp_standard): C++ member function changes.
+
+	* eval.c (evaluate_subexp_standard): Verify TYPE_TARGET_TYPE is
+	non NULL before dereferencing it.
+
+	* eval.c (evaluate_subexp_standard): With HP/aCC compiler it is not possible
+	to perform inferior calls via function pointers.
+	Resolve calls to overloaded functions using find_overload_match.
+	We cannot handle HP/aCC pointers to member functions.
+	Deal with HP/aCC pointers to members in various kind of expressions.
+
+	* f-lang.c (f_printchar): Change FILE to GDB_FILE.
+	(f_printstr): Ditto.
+	(emit_char): Ditto.
+
+	* f-lang.c (f_printstr): Change stdout to gdb_stdout.
+	
+	* f-typeprint.c (f_print_type): Change FILE to GDB_FILE.
+	(f_type_print_varspec_prefix): Ditto.
+	(f_type_print_args): Ditto.
+	(f_type_print_varspec_suffix): Ditto.
+	(print_equivalent_f77_float_type): Ditto.
+	(f_type_print_base): Ditto.
+
+	* findvar.c (): Hp snapshot 3 changes.  (extract_address): Coerce
+	return value from extract_unsigned_integer to CORE_ADDR.
+	(store_address): Change val from CORE_ADDR to LONGEST; changes to
+	support machines where CORE_ADDR and LONGEST are different sizes.
+	(get_saved_register): Coerce arg to store_address to LONGEST.
+	(read_relative_register_raw_bytes): Cast last arg to
+	store_address to LONGEST.  (read_register): Cast return from
+	extract_address to a CORE_ADDR.  (write_register_pid): Change val
+	from LONGEST to CORE_ADDR.  (read_pc_pid): Save and restore
+	inferior_pid if necessary.  (write_pc_pid): Ditto.
+	(read_var_value): Cast arg to store_address.
+
+	* findvar.c (read_relative_register_raw_bytes_for_frame): New
+	function.
+	(read_relative_register_raw_bytes): Call it.
+
+	* findvar.c (symbol_read_needs_frame): Handle LOC_THREAD_LOCAL_STATIC and
+	LOC_INDIRECT.
+
+	* fork-child.c (fork_inferior): Chenge fifth parameter to be a
+	function returning void.
+
+	* fork-child.c (fork_inferior): Delete unused variable f.
+	
+	* fork-child.c: 
+	(Startup_WITH_SHELL): New macro -- interim fix for a bug
+	(breakup_args): New function -- breaks up an argument string into
+	  an argument suitable for passing into execvp().
+	(fork_inferior): Handling problems with starting up gdb with a shell.
+	  -- again, this appears to be an interim fix.
+
+	* fork-child.c: 
+	(fork_inferior): Added a comment
+	(clone_and_follow_inferior): New function. 
+	(startup_inferior): Minor formatting changes.
+	
+	* fork-child.c: 
+	(fork_inferior): Hp change is problematic. The -f option has 
+	different meanings for different shells. It is particularly 
+	inappropriate for bourne shells.
+
+	* fork-child.c: 
+	(fork_inferior): Added new parameter, pre_trace_fun.
+	pre_trace_fun is a function pointer. For some targets,
+	like HPUX, this function gets called to prepare for forking
+	a child.
+
+	* fork-child.c: 
+	(fork_inferior): Fixed call to init_trace_fun
+
+	* fork-child.c: 
+	Moved definition of STARTUP_WITH_SHELL to inferior.h
+	Added a DEBUGGING macro. Currently set to 0. May remove
+	later.
+	breakup_args: Add DEBUGGING ifdefs. more sophisticated 
+	parsing to break up args.
+	(fork_inferior): Rename kshell variable to shell. new local
+	variable, tryname. Make use of STARTUP_WITH_SHELL macro. 
+	More error processing if starting up with a shell.
+	(startup_inferior): Distinguish between starting up with a shell 
+	and not doing so. 
+
+	* gdbthread.h: 
+	Declarations for load_infrun_state and save_infrun_state take
+	an additional parameter.
+
+	* gdbthread.h: Note that sometime between gdb 4.16 and 4.17,
+	    thread.h was renamed gdbthread.h
+	  (load_infrun_state): Additional parameters
+	  (store_infrun_state): Additional parameters
+	
+	* gdbthread.h: Include breakpoint.h
+	
+	* hp-psymtab-read.c (QUICK_LOOK_UP): Redefine to be 0.
+	(hpread_build_psymtabs): Deal with enums.
+	(hpread_start_psymtab): Include section offset.
+	(hpread_end_psymtab): Take care of offset.
+	
+	* hp-psymtab-read.c (TRUE): Define.
+	(FALSE): Define.
+	(file_exists): New function. Checks for existance of file.
+	(hpread_pxdb_needed): Rewrite.
+	(hpread_quick_traverse): Use correct demangling style.
+	Handle F77 case.
+	(hpread_get_header): Rewrite.
+	(hpread_get_textlow): Add support for DOC_FUNCTION.
+	(hpread_build_psymtabs): Make sure we do the right thing
+	for pxdb and F77.
+
+	* hp-psymtab-read.c (hpread_pxdb_check): Change parenthesis positions.
+
+	* hp-psymtab-read.c (hpread_quick_traverse): Compare CORE_ADDR
+	variable end_addr to 0 instaed of NULL to get rif of gcc warning.
+
+	* hp-psymtab-read.c: 
+	(Hpread_get_textlow): Added param to function 
+	Defined convennience macros and some datatypes and variables for 
+	processing the quick lookup-tables. Looks like the code existed
+	before, but has been munged.
+	(hpread_pxdb_needed): Major rearrangements of code. Additional local
+	variables. Also, more extensive checking for various scenarios:
+	debug info for optimized code vs. unoptimized code, pxdb has been
+ 	run vs. pxdb has not been run.
+	(VALID_FILE): New macro
+	(VALID_MODULE): New macro
+	(VALID_PROC): New macro
+	(VALID_CLASS): New macro
+	(FILE_START): New macro
+	(MODULE_START): New macro
+	(PROC_START): New macro
+	(FILE_END): New macro
+	(MODULE_END): New macro
+	(PROC_END): New macro
+	(FILE_ISYM): New macro
+	(MODULE_ISYM): New macro
+	(PROC_ISYM): New macro
+	(VALID_CURR_FILE): New macro
+	(VALID_CURR_MODULE): New macro
+	(VALID_CURR_PROC): New macro
+	(VALID_CURR_CLASS): New macro
+	(CURR_FILE_START): New macro
+	(CURR_MODULE_START): New macro
+	(CURR_PROC_END): New macro
+	(CURR_FILE_ISYM): New macro
+	(CURR_MODULE_ISYM): New macro
+	(CURR_PROC_ISYM): New macro
+	(TELL_OBJFILE): New macro
+	(pst_syms_struct): New typedef to keep track of the start/end symbol
+	table (LNTT) indices of psymtabs created so far.
+	(pst_syms_count): New variable
+	(pst_syms_size): New variable
+	(told_objfile): New variable 
+	(init_pst_syms): New function. sets up psymtab symbol index stuff.
+	(clear_pst_syms): New function. clean up psymtab symbol index stuff.
+	(record_pst_syms): New function. add info about newest psymtab to symbol 
+	index table.
+	(find_next_pst_start): New function. Find a suitable symbol table index.
+	(find_next_file_isym): New function
+	(find_next_proc_isym): New function
+	(find_next_module_isym): New function
+	(scan_procs): New function. Scan and record partial symbols for all 
+	functions starting from specified index and in a specified code range.
+	(hpread_quick_traverse: Major rearrangement of code. The function
+	now uses all the nifty macros. There are some new local variables.
+	Check for EDG_DEMANGLING style. ifdef out some code for handling F77.
+	Previously, the function looped over all the modules in the table.
+	Now, the function loops over all the files, modules, and procedures.
+	With HP aCC and CTTI, it is possible for a compiled object to have a 
+	file and no module.
+	(hpread_build_psymtabs): Added a section of code ifdefed by 
+	QUICK_LOOK_UP. It check to see whether or not there are any globals 
+	in the executable. Fix number of params to hpread_start_psymtab call.
+	Some changes to the way DNTT_TYPE_MODULE is handled.
+	(hpread_get_textlow): Change in signature, minor code changes. The 
+	function finds the low address associated with a specified symbol.
+	In looking for the address for the symbol avoid going of the end of
+	the LNTT file.
+
+	* hp-psymtab-read.c: Change TRUE to 1 and FALSE to 0. Do some
+ 	reformatting.
+
+	* hp-psymtab-read.c: Include demangle.h
+	(trans_lang): New function to let gdb know the correct language.
+	(hpread_quick_traverse): Use ARM style demangling.
+	Demangle procedures names. 
+	Use gdb language names instead of hp language names.
+	Add symbol to list using its demangled name.
+
+	* hp-psymtab-read.c: New file.
+	(hpread_call_pxdb): New function. Call PXDB to process our file.
+	(hpread_pxdb_check): New function. Return TRUE if the file needs 
+	pre-processing by PXDB and we have thus called PXDB to do this 
+	processing and the file needs to be re-loaded.
+	(hpread_quick_traverse): New function. Traverse the quick look-up 
+	tables, building a set of psymtabs.
+	(hpread_get_header): New function. Get appropriate header from obj
+	file, based on pxdb type
+	(hpread_symfile_init): No change from hpread.c
+	(hpread_build_psymtabs): If there are quick lookup tables, read those,
+ 	then scan the global section LNTT. Otherwise, just scan the whole LNTT.
+	Changed: Add a global function entry to the global partial symbol list.
+	Handle end of symbols, for QLT case.
+	In case of TAGDEF, if it is a class or a template, add the name to the
+	var_namespace, so that it is known as a type by gdb.
+	In case of CONSTANT, and it is global, add it to the globals.
+	(hpread_symfile_finish): No change from hpread.c
+	(hpread_get_lntt): Make it not static
+	(hpread_get_gntt): No change from hpread.c
+	(hpread_get_slt): Make it not static
+	(hpread_get_textlow): No change from hpread.c
+	(hpread_start_psymtab): No change from hpread.c
+	(hpread_end_psymtab): No change from hpread.c
+
+	* hp-symtab-read.c (hpread_get_scope_start): Renamed. It was
+	hpread_get_depth.
+	(hpread_type_translate): Distinguish between signed and unsigned char
+	types.
+	(hpread_psymtab_to_symtab): Set flag for hp compilation.
+	(hpread_read_function_type): Append symbols for parameters to local 
+	list as well as	to the global list. Get the parameters types from the
+	local list instead of the global list.
+	(hpread_read_struct_type): Add new field num_fn_fields to next_fn_field
+	structure. Rewrite handling of templates
+	(hpread_type_lookup): Change handling of dntt_type_modifier.
+	(hpread_process_one_debug_symbol): Call hpread_get_scope_start instea
+	of hpread_get_depth. Handle enum as well.
+	(hpread_get_scope_depth): New function. Get nesting depth for a 
+	DNTT entry.
+
+	* hp-symtab-read.c (hpread_psymtab_to_symtab): Set 
+	processing_gcc_compilation to 0.
+	
+	* hp-symtab-read.c (hpread_psymtab_to_symtab_1): Change stdout to
+ 	gdb_stdout; change fflush to gdb_flush.
+	(hpread_psymtab_to_symtab): Change fflush to gdb_flush.
+
+	* hp-symtab-read.c (hpread_read_enum_type): Declare variable.
+	(hpread_read_struct_type): Eliminate references 
+	to 'args' member of fn_field.
+
+	* hp-symtab-read.c (hpread_read_struct_type): A static member
+	is now indicated by the bitsize field, not the bitpos.
+	Initialize physname to empty.
+	(fix_static_member_physnames): Use new macros to deal with
+	physnames.
+
+	* hp-symtab-read.c (hpread_read_struct_type): Change references
+	to bitpos member of struct field to use the FIELD_BITPOS macro.
+
+	* hp-symtab-read.c (hpread_read_struct_type): Comment out reference to
+	obsolete field fn_field.args.
+	Add struct complaint definitions for complaints.
+	(hpread_read_struct_type): Change call to complain.
+	(hpread_read_array_type): Change call to complain. 
+	(hpread_type_lookup): Change call to complain.
+	(hpread_process_one_debug_symbol): Change calls to complain.
+	(hpread_type_translate): Change calls to complain.
+	
+	* hp-symtab-read.c (hpread_read_struct_type): Make sure bitvector
+	has been allocated before calling has_vtable.
+
+	* hp-symtab-read.c (hpread_read_struct_type): Revert change, 
+	just check for vtable without checking for bitvectors too.
+
+	* hp-symtab-read.c: 
+	(Hpread_expand_symtab): Change name of local variable from
+	at_end_of_module to at_module_boundary. 
+	Also, if demangling style is already EDG, do not reset it 
+	to the HP demangling style.
+	Change at_end_of_module param to hpread_process_one_debug_symbol
+	call to at_module_boundary.
+	No longer break out of loop when reach end of module. With CTTI,
+	the compiler can generate function symbols which are not in 
+	any module. Typically they show up after the end of one
+	module and before the start of the next module.
+	(hpread_read_struct_type): Check that the debug info for 
+	a TEMPLATE_ARG is correct.
+	(hpread_process_one_debug_symbol): Change name of at_end_of_module_p
+	param to at_module_boundary_p. 
+	Also set *at_module_boundary_p = -1 if missing a module end and set 
+	it to 1 when finished expanding the debug info.
+	Handle TLS variable.
+
+	* hp-symtab-read.c: Include defs.h, symtab.h, gdbtypes.h, complaints.h.
+	(fixup_class): New static variable.
+	(fixup_method): New static variable.
+	(hpread_get_location): Rewrite.
+	(hpread_has_name): Add cases for DNTT_TYPE_DOC_FUNCTION and 
+	DNTT_TYPE_DOC_MEMFUNC
+	(hpread_expand_symtab): Use HP demangling style. 
+	Set hp_som_som_object_present to 1.
+	(hpread_type_translate): Error out if not immediate. Issue warning
+	if there is an unhandled type code.
+	(error_in_hpread_type_translate_complaint): Remove this structure.
+	(hpread_read_enum_type): Don't assume size of enum is always 4 bytes.
+	(hpread_read_function_type): Add new parameter to indicate a new block.
+	Do not add the parameters to the symbol list.
+	If the type was read in earlier, do not modify the type structure.
+	If we are creating a new block, set the local symbol list to be the
+	param list.
+	Need to mark this type as preprocessed.
+	(hpread_read_doc_function_type): New function. Read and internalize 
+	a native DOC function debug symbol.
+	(hpread_read_struct_type): A method can be of type doc_function and
+	doc_memfunc too.
+	Handle case in which a method is read before its class. Deal with 
+	incomplete method types.
+	Handle cases in which HP/aCC compiler creates operator names w/o
+	the 'operator' keyword. Rewrite the loop over the fileds.
+	(fix_static_member_physnames): New function. Adjust the physnames for 
+	each static member.
+	(fixup_class_method_type): New function. Fix-up the type structure for a 
+	class.
+	(hpread_read_array_type): Change complaint to warning.
+	(hpread_type_lookup): Add case for DNTT_TYPE_DOC_FUNCTION.
+	For structures/classes set static member to point to strings with full
+	names.
+	Change calls to hpread_read_function_type to pass extra parameter.
+	(hpread_record_lines): Handle case for SLT_NORMAL_OFFSET.
+	(class_of): New function. Given a function "f" which is a member of a class,
+ 	find the classname that it is a member of.
+	(hpread_process_one_debug_symbol): Deal with possible alias field from the
+	som record for the Function or Entry type.
+	Do the demangling ourselves if the gdb demangler failed.
+	Add support for DOC functions.
+	For function types, add parameters to local list.
+	(hpread_get_scope_depth): Make this function a no-op.
+	(hpread_adjust_bitoffsets): New function. Adjust the bitoffsets for all 
+	fields of an anonymous union.
+	(hpread_get_next_skip_over_anon_unions): New function. Skip over anonymous 
+	unions.
+
+	* hp-symtab-read.c: Include demangle.h
+	(hpread_expand_symtab): Ensure we are using ARM-style demangling.
+	(hpread_process_one_debug_symbol): Set the mangled and demangled 
+	names for functions.
+	Record the class name to generate the demangled names of member 
+	functions.
+
+	* hp-symtab-read.c: New file.
+	(hpread_get_depth): No change from hpread.c
+	(hpread_get_line): No change from hpread.c
+	(hpread_get_location): No change from hpread.c
+	(hpread_has_name): Make it not static. Return 1 for DNTT_TYPE_BLOCKDATA
+	and DNTT_TYPE_MEMFUNC. Return 0 for CLASS_SCOPE, REFERENCE,PTRMEM,
+ 	PTRMEMFUNC, CLASS, GENFIELD, VFUNC, MEMACCESS, INHERITANCE, 
+	FRIEND_CLASS, FRIEND_FUNC, MODIFIER, OBJECT_ID, TEMPLATE, TEMPLATE_ARG,
+ 	FUNC_TEMPLATE, LINK.
+	(hpread_psymtab_to_symtab_1): No changes from hpread.c
+	(hpread_psymtab_to_symtab): Make it a static function
+	(hpread_expand_symtab): Modified
+	(hpread_type_translate): If not typep.dntti.immediate do not abort, 
+	but complain and return. Same for default action. Handle more HP_TYPEs.
+	(hpread_lookup_type): Initially allocate a correct-size type-vector.
+	(hpread_alloc_type): Reset type_addr only if a type was allocated.
+	(hpread_read_enum_type): If this has already a type associated, return.
+	(hpread_read_function_type): Do different things depending on whether 
+	function is a MEMFUNC, a TEMPLATE, a FUNCTION som record.
+	Do not use the LOC_REGPARM_ADDR symbol class.
+	(hpread_read_struct_type): Handle classes and templates too. Major 
+	rewrite.
+	(hpread_get_nth_template_arg): New function. 
+	(hpread_read_templ_arg_type): New function.
+	(hpread_read_set_type): No change from hpread.c
+	(hpread_read_array_type): Modified
+	(hpread_read_subrange_type): Add handling of more DNTT entries.
+	added support for templates, classes, references, virtual functions.
+	(hpread_type_lookup): Handle DNNT_TYPE_MODULE.
+	(hpread_record_lines): No changes from hpread.c
+	(hpread_process_one_debug_symbol): Handle WITH, COMMON, 
+	CLASS_SCOPE. Expand TAGDEF case to handle classes and templates.
+
+	* hppa-tdep.c (pa_do_strcat_registers_info): Has a new parameter,
+ 	precision, which is passed into the call to pa_strcat_fp_reg to
+ 	indicate whether to display the floating point registers using
+ 	single or double preceision.
+	(pa_strcat_registers): Introduce local variable, precision, and 
+	pass it into call to pa_strcat_fp_reg.
+	(pa_strcat_fp_reg): Modified function. New parameter, precision,
+	used by function to decide whether to use single or double
+	precision. Also added the code to put a double precision value
+	into a buffer.
+
+	* hppa-tdep.c: Add'l includes <machine/save_state.h>,
+ 	<unistd.h>, declare pa_register_look_aside, define is_pa_2.
+	(rp_saved): Check for where to read the return pointer from.
+	(pa_do_registers_info): Handle is_pa_2. (pa_register_look_aside):
+ 	new function. (pa_print_registers): Handle is_pa_2.
+  	(in_solib_call_trampoline): Handle a compiler/linker error.
+	(skip_trampoline_code): Changes to some masks used in examining
+	instructions.  (inst_saves_fr): Test for FSTWS instruction.
+	(skip_prologue): Renamed to skip_prologue_hard_way.
+	(after_prologue): New function.  (skip_prologue): New function.
+
+	* hppa-tdep.c (after_prologue): If f is NULL, don't dereference
+	it.
+
+	* hppa-tdep.c (after_prologue): If no debug info, return zero
+	telling caller that we need to find the end of the prologue via
+	the hard way (instruction examination).
+
+	* hppa-tdep.c (find_unwind_entry): Avoid dereferencing a null
+	pointer.
+
+	* hppa-tdep.c (hppa_pid_to_exec_file): Deleted -- no longer used.
+
+	* hppa-tdep.c (hppa_prepare_to_proceeed): Add prototype.
+	(read_unwind_info): Purecov comments, bug fixes.
+	(find_unwind_entry): Purecov comments, bug fixes.
+	(find_stub_with_shl_get): Purecov comments.
+	(frame_chain): Additional parens.
+	(hppa_push_arguments): Changes to commented out version of routine.
+	(hppa_fix_call_dummy): Purecov comments, fix location of end.o.
+	(in_solib_call_trampoline): Purecov comments.
+	(in_solib_return_trampoline): Purecov comments.
+	(setup_d_pid_in_inferior): Fix location of end.o.
+	(initialize_hp_cxx_exception_support): Fix location of end.o.
+	(child_enable_exception_callback): Purecov comments.
+
+	* hppa-tdep.c: 
+	(Pa_do_strcat_registers_info): New routine. called by 
+	tui/tuiRegs.c:_tuiRegisterFormat to place a register name 
+	and value into a string buffer. Interface may change in
+	future. Checking this in so that we have something 
+	functional for HP.
+	(pa_strcat_registers): New routine, called by 
+	pa_do_strcat_registers_info. Does same thing as 
+	pa_print_registers except it takes a stream parameter. 
+	This routine should disappear in future. Checking in
+	so that we have something functional to give HP
+	(pa_strcat_fp_reg): New routine, called by 
+	pa_do_strcat_registers_info and pa_strvat_registers
+	to place a floating point register name and value into
+	a buffer. This interface may change in future. 
+	Checking in so that we have something functional to give HP.
+
+	* hppa-tdep.c: (Pa_print_fp_reg): Change prototype to match def'n.
+	(pa_register_look_aside): Fix comment immediately before function.
+
+	* hppa-tdep.c: Changes to better support stack unwinding, 
+	    reading and writing registers for HPUX. The HP folks had
+	    an advantage ... access to a runtime architecture spec ;-}.
+	  New includes: Ptrace.h
+	  (internalize_unwinds): Initialize new fields in table.
+	  (read_unwind_info): Entries in the table are now more complex
+	    structures. References of the form ...->table[index].stub_type
+	    are now ...->table[index].stub_unwind.stub_type.
+	  (find_proc_framesize): Added a check for pc == 0.
+	  (rp_saved): Entries in the table are now more complex
+	    structures. References of the form ...->table[index].stub_type
+	    are now ...->table[index].stub_unwind.stub_type.
+	  (frameless_function_invocation): Stub_type becomes
+ 	    stub_unwind.stub_type
+	  (saved_pc_after_call): Stub_type becomes stub_unwind.stub_type
+	  (hppa_frame_saved_pc): Stub_type becomes stub_unwind.stub_type
+	  (frame_chain_valid): Stub_type becomes stub_unwind.stub_type
+	  (hppa_call_dummy): Stub_type becomes stub_unwind.stub_type
+	  (pa_print_fp_reg): Additional params to call val_print
+	  (in_solib_call_trampoline): Stub_type becomes stub_unwind.stub_type
+	  (in_solib_return_trampoline): Stub_type becomes stub_unwind.stub_typ
+	  (skip_trampoline_code): Additional code to handle external
+	     dyncalls. Also stub_type becomes stub_unwind.stub_type
+	  (hppa_pid_to_exec_file): New funct. FOr HPUX 10.0 and beyond there
+	     is an explicit ptrace request for getting the pathname associated
+	     with a process id (pid).
+	
+	* hppa-tdep.c: Fix for gcc compile on HPUX
+	  (hppa_pid_to_exec_file): Remove unwanted param from 
+	     call to call_ptrace. Note, hppa_pid_to_exec_file goes
+	     away in subsequent hp snapshots.
+
+	* hppa-tdep.c: Include bfd.h.
+	include dl.h
+	(args_for_find_stub): New structure.
+	(find_unwind_entry): Deal with null input pc value.
+	(rp_saved): Ditto.
+	For the import stub, return -24 always.
+	(hppa_frame_saved_pc): Save old pc value, to detect we are in a loop.
+	(init_extra_frame_info): Use TARGET_READ_FP.
+	(frame_chain): Include thread support.
+	If the caller's pc is zero, we loose and return, just like stack bottom.
+	Disable warning about being unable to find unwind info.
+	(hppa_push_arguments): Rewrite.
+	(hppa_value_returned_from_stack): New function. Handles returning a value
+	larger that 64 bits, stored on the stack.
+	(find_stub_with_shl_get): New function. To look up symbols in shlibs.
+	(cover_find_stub_with_shl_get): New function. Cover routine for 
+	find_stub_with_shl_get to pass to catch_errors.
+	(hppa_fix_call_dummy): Comment out old stub mechanism. Rewrite using dyncall.
+	(target_read_fp): New function.
+	(pa_do_registers_info): Floating point registers start at FP4.
+	(pa_print_registers): Use FP4_REGNUM instead of 72.
+	(skip_trampoline_code): Do machine instruction matching for PA2.0.
+	(setup_d_pid_in_inferior): New function. Exception handling support.
+	(initialize_hp_cxx_exception_support): Ditto.
+	(child_enable_exception_callback): Ditto.
+	(child_get_current_exception_event): Ditto.
+
+	* hppah-nat.c (child_post_wait, child_post_follow_vfork,
+ 	child_post_follow_inferior_by_clone): New functions.
+
+	* hppah-nat.c (child_xfer_memory): Make sure the call to ptrace really
+	fails before we give up.
+	(hppa_pid_to_str): New function. Format a process id.
+	(hppa_tid_to_str): New function. Format a thread id. 
+
+	* hppah-nat.c (child_xfer_memory): Use xmalloc, not alloca.
+	(child_post_wait): Delete.
+	(child_post_follow_vfork): Delete decl of child_ops; delete
+	large chunks of function -- let it be handled by the normal
+	mechanism that notices and handles exec events, in resume().
+
+	* hppah-nat.c (require_notification_of_exec_events): New function;
+	just notify of exec events, not all events, and just the specified
+	pid, don't include it's children (10.20 version).
+	(child_acknowledge_created_inferior): Call new function
+	require_notification_of_exec_events instead of
+	require_notification_of_events.
+	
+	* hppah-nat.c [!GDB_NATIVE_HPUX_11]: Move HPUX 10.x-specific
+ 	support code here from infptrace.c.
+
+	* hppah-nat.c: Removed #define ptrace call_ptrace
+	replaced all calls to ptrace with calls to call_ptrace
+	(parent_attach_all): Removed call to ptrace
+
+	* hpread.c (hpread_psymtab_to_symtab_1): Change fflush to
+	gdb_flush; change stdout to gdb_stdout.
+	(hpread_psymtab_to_symtab): Change fflush to gdb_flush.
+	
+	* hpread.h: New file. Includes all includes, struct defs, defines
+ 	from hpread.c. 
+
+	* infcmd.c 
+	(attach_command): New local variable, exec_file, added code to
+ 	  determine exec_file from pid if exec_file is not already known,
+	  call new target operation, target_post_attach -- a no-op unless
+	  on HPUXHPPA
+	(detach_command): After detaching, do a SOLIB_RESTART
+
+	* infcmd.c (objfiles.h): Fix typo on include line.
+
+	* infcmd.c (run_command): Only call SOLIB_RESTART if it's
+	defined.
+	(detach_command): Ditto.
+
+	* infcmd.c: 
+	(run_stack_dummy): Add calls to 
+	disable_watchpoints_before_interactive_call_start and
+	enable_watchpoints_after_interactive_call_stops
+	(finish_command): Alter code handling the evaluation and printing
+	of the target function's return value.
+	(attach_command): When given a pid, but no exec file, try to determine
+	the exec file from the process. If the process does not record a 
+	full path name, try to qualify the filename against the source path.
+	(_initialize_infcmd): Add some verbiage about how to use the attach command
+
+	* infcmd.c: 
+	Include objfiles.h
+	(run_command): If program has already been started, and decide
+	to restart it, then kill the target, flush the caches, 
+	call init_wait_for_inferior. Also purge old solib objfiles.
+
+	* infcmd.c: Changed calls to val_print, using a new macro,
+	  SOLIB_RESTART
+	  (run_command): Calls SOLIB_RESTART
+	  (do_registers_info): Changed calls to val_print
+
+	* infcmd.c: Made the symfile.h include preceed the 
+	objfiles.h include. The other ordering caused a 
+	compile problem (incompletely defined types).
+
+	* inferior.h (REQUIRE_DETACH): Fix default definition.
+	* inftarg.c (child_post_attach): Fix declaration, make static.
+	(proc_wait): Make globally visible.
+	(child_insert_fork_catchpoint, etc): Fix return type.
+
+	* inferior.h (STARTUP_WITH_SHELL): New define.
+	(START_INFERIOR_TRAPS_EXPECTED): New define
+
+	* inferior.h (fork_inferior): Change fifth parameter to be a function 
+	returning void. 
+
+	* inferior.h (proc_wait): Declare.
+
+	* inferior.h: 
+	  (Require_ATTACH): New macro
+	  (REQUIRE_DETACH): New macro
+	  (detach): Definition is now an extern
+	  (clone_and_follow_inferior): New definition, it's also an extern
+
+	* inferior.h: 
+	  (Require_attach): Default definition for require_attach funct
+	  (require_detach): Default definition for require_detach funct
+	  (pre_fork_inferior): New funct decl for function defined in
+	   infptrace.c
+	  (fork_inferior): New parameter in funct decl.
+
+	* inferior.h: 
+	  New variable decls: Inferior_ignoring_startup_exec_events,
+	    inferior_ignoring_leading_exec_events -- these variables 
+	    are used when processing an exec call.
+	  (CALL_DUMMY_HAS_COMPLETED): New default macro -- for targets
+	    where PC in call dummy implies that call dummy has 
+	    completed. Note, that on HPUX this inference does not hold.
+
+	* infptrace.c
+	  (require_notification_of_events): New function
+	  (child_acknowledge_created_inferior): Previously named
+	     hppa_acknowledge_forked_child. Also calling 
+ 	     require_notification_of_events and clearing some semaphore 
+	     variables
+	  (child_post_startup_inferior): New function
+	  (child_create_catch_fork_hook): Previously named
+	     hppa_create_catch_fork_hook
+	  (child_create_catch_vfork_hook): Previously named
+	     hppa_create_catch_vfork_hook 
+	  (child_has_forked): Previously named hppa_target_has_forked
+	  (child_has_vforked): Previously named hppa_target_has_vforked
+	  (process_wait): Changed to call target_post_wait
+	  (attach): Add call to require_notification_of_events
+	  (child_pid_to_exec_file): New function
+	  (hppa_require_attach): New local variable, pt_status
+	  (hppa_get_process_events): New function
+
+	* infptrace.c (call_ptrace): Simplify control flow.
+	(proc_wait): Move here from inftarg.c, add target_post_wait call.
+
+	* infptrace.c (call_ptrace): Add some debugging code.
+
+	* infptrace.c (child_pid_to_exec_file): Declare variable.
+
+	* infptrace.c (kill_inferior): Clean up call to proc_wait.
+
+	* infptrace.c: 
+	(Call_ptrace): When the ptrace request is PT_SETTRC,
+	call ptrace and then call parent_attach_all.
+
+	* infptrace.c: 
+	(Child_has_syscall_event): New function. only applicable
+	(for now) on HPUX 10.30 and beyond via the ttrace call.
+	In infptrace.c there is a default operation.
+ 	With ttrace, it is possible to tell the kernel to
+	notify the debugger that the target program is about to make
+	or return from a syscall.
+	(child_thread_alive): New function. a default function.
+	ptrace doesn't support kernel threads.
+	(hppa_enable_page_protection_events): Defualt function
+	(hppa_disable_page_protection_events): Default function
+
+	* infptrace.c (child_pid_to_exec_file): Fix number of params to
+ 	cal_ptrace call.
+
+	* infptrace.c (hppa_pid_or_tid_to_str): New function.
+	(hppa_switched_threads): New function.
+	(hppa_ensure_vforking_parent_remains_stopped): New function.
+	(hppa_resume_execd_vforking_child_to_get_parent_vfork): New function.
+
+	* infptrace.c: Most of the changes found in infptrace.c should
+	    be moved to hppah-nat.c
+	  (PT_VERSION): A new define
+	  (startup_semaphore_t): A new struct type. it is used to 
+	    coordinate the parent and child processes after a fork and 
+	    before an exec on HPUX.
+	  (call_ptrace): Changes to determine whether the ptrace
+	    request is for starting the tracing of the target process.
+	  (parent_attach_all): New funct. used on HPUX for coordinating
+	    the parent and child processes after a fork and before and exec.
+	  (hppa_acknowledge_forked_child): New funct. prabably belongs 
+	    in hppah-nat.c
+	  (hppa_enable_catch_fork): New funct. probably belongs in 
+	    hppah-nat.c
+	  (hppa_disable_catch_fork): New funct. probably belongs in
+	    hppah-nat.c
+	  (hppa_create_catch_fork_hook): New funct. probably belongs in 
+	    hppah-nat.c
+	  (hppa_enable_catch_vfork): New funct. probably belongs in 
+	    hppah-nat.c
+	  (hppa_disable_catch_vfork): New funct. probably belongs in
+	    hppah-nat.c
+	  (hppa_create_catch_vfork_hook): New funct. probably belongs to
+	    hppah-nat.c
+	  (hppa_target_has_forked): New funct. probably belongs in 
+	    hppah-nat.c
+	  (hppa_target_has_vforked): New funct. probably belongs in
+	    hppah-nat.c
+	  (process_wait): New funct. also ifdefed for proc_wait.
+	  (kill_inferior):  Call proc_wait rather than wait. this is 
+	    pretty hacky. 
+	  (pre_fork_inferior): New function. used only by HPUX.
+	    probably should be defined elsewhere.
+
+	* infrun.c (follow_inferior_fork): Only define on HP.
+	(wait_for_inferior): Only call SOLIB_IN_DYNAMIC_LINKER if we have
+	shared libraries; restore test of IN_SOLIB_DYNSYM_RESOLVE_CODE
+	removed by HP.
+
+	* infrun.c (normal_stop): Add a call to the TUIDO 
+	macro just before the annotate_stopped label. This
+	updates the windows after each program stop.
+
+	* infrun.c (normal_stop): Verify stop_command is non-zero before
+	dereferencing it (it won't be set if dbx_commands is set).
+
+	* infrun.c (resume): Add #ifdef HPPAHPUX around HPUX-specific
+	code.
+
+	* infrun.c (resume): Add missing semicolon.
+
+	* infrun.c (wait_for_inferior): Fix syntax error.
+
+	* infrun.c (follow_fork_mode_kind_names): Removed "both" option.
+	(follow_fork): Added parameters. additional code for handling
+	following of parent, following of child
+	(resume): Added code for deciding how to resume in presence of
+	fork. Additional params to follow_fork call.
+
+	* infrun.c (follow_exec): Ifdef for HPUXHPPA for the moment, the
+ 	code in here assumes the existance of the child_ops target
+ 	vector. This is incorrect for Solaris.
+
+	* infrun.c (resume): Fixed ifdefs, HPPAHPUX -> HPUXHPPA.
+
+	* infrun.c (wait_for_inferior): Fixed a matching parens problem --
+ 	matching curly brace inside ifdefed code which is not being
+ 	compiled. Change local validFlag to be an 'int' rather than a
+ 	'bool' and fixed the corresponding assignment statements.
+
+	* infrun.c: 
+	Two new global variables: Inferior_ignoring_startup_exec_events and
+	inferior_ignoring_leading_exec_events.
+	New static variables: Parent_of_vfork_trap_expected_and_ignorable,
+	step_resume_breakpoint, through_sigtramp_breakpoint, pending_follow,
+	follow_vfork_when_exec
+	(follow_inferior_fork): Does what follow_fork did! 
+	(follow_fork): Is now a wrapper function for follow_inferior_fork
+	(follow_vfork): Is now a wrapper function for follow_inferior_fork
+	(follow_exec): New function, handles an exec event.
+	(resume): Remove 3 local variables: Child_pid, has_forked, has_vforked.
+	move and expand code that tries to follow a fork (i.e. also check
+ 	for vfork and exec
+	(init_wait_for_inferior): Initialize the new structure, pending_follow
+	(delete_breakpoint_current_contents): When deleting all the breakpoints also 
+	set the breakpoint struct pointer to NULL.
+	(wait_for_inferior): A number of changes.
+ 	The step_resume_breakpoint and through_sigtramp_breakpoint local 
+	variables are now visible in entire module. 
+	Changed name of variable from child_inferior_pid to saved_inferior_pid.
+	Added several cases to the event processing switch statement: 
+	Target_WAITKIND_FORKED, TARGET_WAITKIND_VFORKED, TARGET_WAITKIND_EXECD.
+	Also, for TARGET_WAITKIND_STOPPED, check to see if expecting a trap
+	from the parent of a vfork (ignorable) otherwise break as usual.
+	When determining the value of 'random_signal' (0 or 1), no longer check for 
+	catchpoints. 
+	When determining how to handle unexpected signals, must now take into
+	account fork, vfork, and exec.
+	Change call to PC_IN_CALL_DUMMY to a call to CALL_DUMMY_HAS_COMPLETED
+	At stop_stepping label, check to see if stopped for fork or
+	vfork event.
+
+	* infrun.c: New code is related to threads and fork/vfork/exec.
+ 	New static variable: Thread_step_needed
+	Deleted static variable: Parent_of_vfork_trap_expected_and_ignorable
+	Altered the pending_follow and fork_event structs
+	(follow_inferior_fork): Before detaching from child and removing
+	all breakpoints form it -- but only if forking or following 
+ 	vforks as soon as they happen. Also reset the solib inferior hook.
+	The same kind of logic applies to hitting step_resume_breakpoints
+	(calling breakpoint_re_set_thread) and to resetting and inserting 
+	breakpoints. 
+	(follow_exec): Forward decl
+	(follow_vfork): Check to see if gdb followed the child. If
+	the child exec'd before gdb saw the parent's vfork event
+	then call follow_exec.
+	(follow_exec): If the exec occured after a vfork, then follow
+	the vfork as well. Do it before following the exec.
+	Make sure to update breakpoints after and exec
+	(resume): New local variable, should_resume. 
+	Change parameters in calls to follow_fork, follow_vfork, and 
+	follow_exec. Some changes to the way various pending_follow.kind
+	situations are handled (there's TARGET_WAITKIND_FORKED, 
+	TARGET_WAITKIND_VFORKED, ARGET_WAITKIND_EXECD. Some additional
+	conditions to check before deciding to resume the target (i.e.
+	should_resume=1, stepping?, thread_step_needed?i, regular 
+	resume?)
+	(proceed): When proceeded at location that does not have a breakpoint
+	set thread_step_needed=0 to indicate that it is not necessary to
+	single step thread over breakpoint. SOme additional checks to see
+	if it is necessary to step thread over breakpoint.
+	(start_remote): Remove call to clear_proceed_status.
+	(init_wait_for_inferior): Initialize new fields in fork_event
+	structure and add a call to clear_proceed_status.
+	(wait_for_inferior): New local variable: New_thread_event.
+	Initialize thread_step_needed = 0. 
+	Minor massaging of conditions for adding a new thread to the thread list. 
+	No longer resuming execution after adding a new thread. Let user play with thread first.
+	Some changes in the way TARGET_WAITKIND_FORKED, ARGET_WAITKIND_VFORKED,
+	TARGET_WAITKIND_EXECD are handled -- this is all HPUX related. 
+	Simplified TARGET_WAITKIND_STOPPED -- HP previously had some
+	more complicated code in here. 
+	Moved the code to resume threads to after the large case statement that processes the events.
+	Additional processing for stop_signal=TARGET_SIGNAL_TRAP. 
+	Cleanup code at process_event_stop_test label. 
+	Set thread_step_needed when processing a BPSTAT_WHAT_SINGLE.
+	Minor massaging of fork/vfork/exec part of stop_stepping code.
+	(normal_stop): Minor changes. calling show_and_print_stack_frame.
+	(xdb_handle_command): New function
+	(_initialize_infrun): Handle xdb_commands. also handle dbx commands
+
+	* infrun.c: Changes to support following forks, and handling
+	    catchpoints.
+	  (follow_fork_mode_kind_names): New array
+	  (follow_fork): New function. implements the follow parent,
+	    or child functionality.
+ 	  (resume): Additions to check whether the target process 
+	    just forked and decide which process to follow.
+	  (wait_for_inferior): Additional variables (child_inferior_pid,
+	      stepping_through_solib_after_catch, 
+	    -  stepping_through_solib_catchpoints.
+	    -  Altered CURRENTLY_STEPPING macro to check for stepping through
+	       a shared library after hitting a catchpoint.
+	    - Add parameters to save_infrun_state call
+	    - Check for fork and vfork when deciding if event is a random
+	       signal
+	    - When considering stops due to breakpoints, check for 
+	      BPSTAT_WHAT_CHECK_SHLIBS_RESUME_FROM_HOOK
+	    - Check for stop due to an explicit catchpoint
+	    - When checking for single stepping event, also check for
+	      stepping to get out of dynamic linker's hook after catching
+	      a shlib event
+	  (is_internal_shlib_eventpoint): New funct. check to see if 
+	      event type is bp_shlib_event.
+	  (stopped_for_internal_shlib_event): New funct. check for shlib
+	      events
+	  (stopped_for_shlib_catchpoint): New funct. check for catchpoints.
+	  (normal_stop): Additions to check for shlib event
+	  (set_follow_fork_mode_command): New funct. handles the new follow
+	      fork command.
+	  (_initialize_infrun): Additions for follow-fork-mode command.
+
+	* infrun.c: Ifdefing references to 
+	switched_from_inferior_pid for HPUXHPPA. They don't seem 
+	useful for Solaris (i.e. non-HPUX)
+
+	* infrun.c: Included tuiData.h and tuiDataWin.h, ifdefed for TUI.
+	Included top.h. New static variables: Switched_from_inferior_pid, 
+	number_of_threads_in_syscalls. 
+	(follow_inferior_fork): If there is a step_resume breakpoint
+	explicitly reset the thread number. 
+	(resume): For TARGET_WAITKIND_VFORKED, removed a check for getting 
+	the vfork event to soon.
+	(init_wait_for_inferior): Added parameter to call to 
+	breakpoint_init_inferior. Initialize number_of_threads_in_syscalls.
+	(wait_for_inferior): New local variables: Prev_sal,
+	enable_hw_watchpoints_after_wait, stepping_through_sigtramp,
+	stepped_after_stopped_by_watchpoint. Enable watchpoints after a wait.
+	Added cases for TARGET_WAITKIND_SYSCALL_ENTRY and 
+	TARGET_WAITKIND_SYSCALL_RETURN.
+	Do additional processing if stop due to breakpoint, but breakpoint is
+	only valid for a thread other than the one currently running. Additional
+	parameters to save_infrun_state and load_infrun_state. Some additional
+	processing for BPSTAT_WHAT_STEP_RESUME. Some additional processing to 
+	handle stepping over a function.
+	(normal_stop): Added notification of switching threads. ifdefing some
+	TUI changes and leaving out non-essential TUI changes.
+	(restore_selected_frame): Ifdefing some TUI changes
+	(restore_inferior_status): Ifdefing some TUI changes
+
+	* infrun.c: Removed the TUI ifdefs and TUI code. Also removed
+	include for top.h. HP introduced this. I'm taking it out.
+
+	* inftarg.c (child_detach_from_process): Declare.
+	(child_attach_to_process): Declare.
+	(child_stop): Make static to match declaration.
+
+	* inftarg.c (ptrace_him): Change prototype back to return int. 
+
+	* inftarg.c (ptrace_me): Remove debug output, pass NULL to
+	fork_inferior if not HPUX.
+
+	* inftarg.c: 
+	  (child_require_attach): New funct prototype and definition
+	  (child_require_detach): New funct prototype and definition
+	  (proc_wait): Funct prototype and definition are enclosed by
+	    proc_wait ifndef
+	  (child_attach_to_process): New function, does most of the 
+	    work that child_attach used to do and some additional 
+	    work to determine whether gdb is already attached to the
+	    target how to react.
+	  (child_attach): Altered. It's now a wrapper for
+	    child_attach_to_process.
+	  (child_require_attach): New function, called if should attach
+	    even when gdb is already attached to target.
+	  (child_detach_from_process): New function, does most of the 
+	    work that child_detach used to do and some additional work
+	    to determine whether gdb is currently attached to the target.
+	  (child_detach): Altered. It's now a wrapper for 
+	    child_detach_from_process.
+	  (child_require_detach): New function, called if should try to 
+	    detach even when gdb is not attached to target.
+	  (ptrace_him): Calls a new function, target_acknowledge_forked_child.
+ 	    Currently, target_acknowledge_forked_child, is only defined to
+	    do something for HPUX.
+	  (child_create_inferior): Changed call to fork_inferior.
+	  (child_ops): Added to_require_attach and to_require_detach fields
+	    to the child_ops target ops vector.
+
+	* inftarg.c: 
+	  Some hacks for ttrace work 
+	  (child_wait): Additional local variables, additional code in
+	    while loop to check for: Process exited, process forked, 
+	    process vforked, process execd
+	  (child_thread_alive): John B. seems to think that the kill 
+	    call is inapproapriate for HPUX.
+	  (child_attach_to_process): Using strtol rather than atoi.
+	    no longer check for case where there is no known exec file.
+	  (child_post_attach): New function, a default, a no-op
+ 	  (child_insert_fork_catchpoint): New function, a default, a no-op
+	  (child_remove_fork_catchpoint): New function, a default, a no-op
+	  (child_create_catch_fork_hook): Deleted
+	  (child_create_catch_vfork_hook): Deleted
+	  (child_insert_vfork_catchpoint): New function, a default, a no-op
+	  (child_remove_vfork_catchpoint): New function, a default, a no-op
+	  (child_can_follow_vfork_prior_to_exec ):new function, a default, 
+ 	     a no-op
+	  (child_insert_exec_catchpoint): New function, a default, a no-op
+	  (child_remove_exec_catchpoint): New function, a default, a no-op
+	  (child_has_execd): New function, a default, returns 0
+	  (child_reported_exec_events_per_exec_call): New function, a 
+ 	     default, returns 1
+	  (child_has_exited): New function, a default.
+	  (child_core_file_to_sym_file): New function, a default, returns NULL.
+	  (child_ops): Initialize new target_ops vector fields to the 
+	     child* functions.
+	* infptrace.c: 
+	(Call_ptrace): For HPUX, handle additional requests: Pt_CONTIN1,
+	  PT_STEP1.
+	(require_notification_of_events): Add several signals to the
+	  set of events requiring notification: Ptrace_SIGNAL, 
+	  PTRACE_EXEC, PTRACE_FORK, PTRACE_VFORK
+	(child_acknowledge_created_inferior): This function is only
+	  defined if CHILD_ACKNOWLEDGE_CREATED_INFERIOR is defined.
+	(child_post_startup_inferior): Function is only defined if
+	  CHILD_POST_STARTUP_INFERIOR is defiend. Also, now call
+  	  require_notification_of_events.
+	(child_create_catch_fork_hook): Deleted
+	(child_create_catch_vfork_hook): Deleted
+	(child_insert_fork_catchpoint): New function
+	(child_remove_fork_catchpoint): New function
+	(child_insert_vfork_catchpoint): New function
+	(child_remove_vfork_catchpoint): New function
+	(child_has_forked): Now enclosed by a CHILD_HAS_FORKED ifdef
+	(child_has_vforked): Now enclosed by CHILD_HAS_VFORKED ifdef
+	(child_can_follow_vfork_prior_to_exec): New function
+	(child_insert_exec_catchpoint): New function
+	(attach): Removed call to require_notification_of_events 
+	(child_post_attach): New function, call to 
+	  require_notification_of_events moved here.
+	(child_pid_to_exec_file): New enclosed by CHILD_PID_TO_EXEC_FILE ifdef 
+	  introduced the concept of a saved_inferior_pid
+	(hppa_require_attach): Add some code to decide if gdb is already 
+	  attached to process. Can not figure this out via a ptrace call.
+	(hppa_insert_hw_watchpoint): New function
+	(hppa_remove_hw_watchpoint): New function
+
+	* inftarg.c: 
+	(child_attach_to_process): Change position in file
+	(child_detach_from_process): Change position in file
+
+	* inftarg.c: 
+	(child_attach_to_process): Changed parameter to child_wait call
+
+	* inftarg.c: 
+	(child_post_wait): New function declaration and definition
+	(ptrace_him):
+ 	   - change return value to a void.
+	   - change target_acknowledge_forked_child call to 
+	     target_acknowledge_created_inferior
+	   - call target_post_startup_inferior rather than returning pid.
+	(child_attach_to_process): Change param name, fail_if_already_attached
+	  -> after_fork.
+	  Invert a couple of if-then-else statments.
+	  Use REQUIRE_ATTACH macro
+	  (child_attach): Change params in child_attach_to_process call
+	  (child_require_attach): Change params in child_attach_to_process call
+	  (child_detach_to_process): Change param name, 
+	    fail_if_already_attached -> after_fork.
+	  Invert a couple of if-then-else statments.
+	  Use REQUIRE_DETACH macro
+	  (child_detach): Change params in child_detach_from_process call
+	  (child_require_detach): Change params in child_detach_from_process
+	     call
+	  (child_post_startup_inferior): New function
+	  (child_acknowledge_created_inferior): New function
+	  (child_clone_and_follow_inferior): New function
+	  (child_post_follow_inferior_by_clone): New function
+	  (child_create_catch_fork_hook): New function
+	  (child_create_catch_vfork_hook): New function
+	  (child_has_forked): New function
+	  (child_has_vforked): New function
+	  (child_post_follow_vfork): New function
+	  (child_stop): No longer a static function
+	  (child_pid_to_exec_file): New function
+
+	* inftarg.c: 
+	(child_wait): Child_pid becomes related pid. return pid
+	rather than inferior_pid. Changes are in code handling fork
+	and vfork
+
+	* inftarg.c: 
+	Include gdb_stat.h and sys/unistd.h
+	(child_wait): New local variables. Check for live threads.
+	Check for syscall events
+	(child_thread_alive): No longer a static funct. 
+	(ptrace_him): Remove some code inserted in snap3
+	(child_create_inferior): Added a bunch of code to handle a 
+	bad interaction between start-up-with-shell and the HP
+	catch-fork/catch-exec logic. I am ifdefing this for 
+	HPUXHPPA for now.
+	(child_has_syscall_event): New default target_ops function
+	(child_enable_exception_callback): New default target_ops function
+	(child_get_current_exception_event): New default target_ops function
+	(child_ops): 3 new fields
+
+	* inftarg.c: Remove HPUX_SNAP1 and HPUX_SNAP2 ifdefs
+
+	* inftarg.c: Reverted previous change.
+	
+	* infttrace.c (hppa_remove_hw_watchpoint): Fix check for write
+	access hardware watchpoint.
+
+	* infttrace.c (proc_wait): Rename from proc_wait.
+
+	* infttrace.c (require_notification_of_exec_events): New function;
+	just notify of exec events, not all events, and just the specified
+	pid, don't include it's children.
+	(child_acknowledge_created_inferior): Call new function
+	require_notification_of_exec_events instead of
+	require_notification_of_events.
+	(child_post_startup_inferior): Call require_notification_of_events
+
+	* infttrace.c: Changed all references to boolean to int.
+	Changed all references to TRUE and FALSE to 1 and 0.
+
+	* irix5-nat.c (symbol_add_stub): Add params to call to
+ 	symbol_file_add.
+
+	* jv-lang.c (get_dynamics_objfile): Add 2 more parameters to call
+ 	to allocate_objfile.
+
+	* main.c (fputs_unfiltered): Changes to prevent cursor form
+ 	jumping around in the TUI. Altered where tuiTermUnsetup and
+ 	tuiTermSetup are called
+
+	* main.c (fputs_unfiltered): Changed function so that it
+	checks to see if output is to a string buffer or to a 
+	FILE stream and does the correct action (i.e. strcat or
+	fputs). Fixed params for fputs call.
+
+	* main.c (fputs_unfiltered): Don't try to call the TUI's
+	CommandCharCount functions when the TUI isn't enabled.
+
+	* main.c (fputs_unfiltered): Change FILE to GDB_FILE.
+
+	* main.c (main): If the user gives the --version or --help flags,
+ 	disable the TUI.
+
+	* main.c (tui_version, xdb_commands, dbx_commands): New variables.
+  	(main): New command line arguments --tui, --xdb, --dbx; add call
+ 	to tyiCleanUp via tuiDo to main loop.
+	(fputs_unfiltered): Tui related changes.
+
+	* main.c: Define 2 new global variables, gdb_stdout and gdb_stderr
+ 	of type GDB_FILE.
+ 	(main): Allocate space for and initialize gdb_stdout and gdb_stdin.
+
+	* objfiles.c (find_pc_sect_section): Make end condition be less
+	than s->endaddr, not less than or equal to s->endaddr.
+
+	* objfiles.c: 
+	(allocate_objfile): 2 new parameters: User_loaded and is_solib.
+	When appropriate, record in the object file that it is user loaded.
+ 	The run command can use this information to purge object file
+	entries associated with the old inferior and keep user loaded 
+	object files loaded via the add-symbol-file command.
+	(objfile_purge_solibs): New function. deletes all objectfile entries
+	that are not explicitly loaded by the user.
+	
+	* objfiles.c: 
+	(objfile_relocate): Check for LOC_INDIRECT
+	(find_pc_sect_section): Change condition from 
+	pc < s->endaddr to pc <= s->endaddr
+
+	* objfiles.h: 
+	New variables: User_loaded and is_solib
+	(OBJF_SHARED): New macro. used to distinguish objfile for
+	shared library from "vanilla" objfile.
+	(allocate_objfile): Add new parameters to function decl.
+	(objfile_purge_solibs): New function decl.
+	
+	* objfiles.h: Add some typedefs: Importentry, ExportEntry.
+	Add some new variables: Import_list, import_list_size,
+	export_list, export_list_size
+	
+	* osfsolib.c: 
+	(symbol_add_stub): Added params to call to symbol_file_add
+
+	* pa/hpux1020.mh (NATDEPFILES): Add corelow.o, symbol table and
+	solib files.
+	
+	* pa/hpux1100.mh (NAT_FILE): Use nm-hppah11.h.
+	(NATDEPFILES): Add symbol table and solib files.
+
+	* pa/nm-hppah11.h: New file, HPUX11-only definitions.
+
+	* pa/tm-hppa.h (proc_wait): Remove decl and macro.
+
+	* parse.c (write_dollar_variable): Handle cases in which variables
+	besides the debugger ones start with $ and $$.
+	(parse_nested_classes_for_hpacc): New function.  Parse a string that 
+	is possibly a namespace / nested class specification.
+	(find_template_name_end): New function. 
+
+	* procfs.c: 
+	(procfs_init_inferior): Return value is now a void.
+
+	* procfs.c (procfs_ops): Initializing new target ops vector fields. see list below.
+	
+	* procfs.c: 
+	(procfs_ops): Adding new target_ops vector fields and
+	  removing a few. see list below
+
+	* procfs.c: Added new fields to procfs_ops. 
+	Necessary since we still have oldstyle initialization in
+	this file
+
+	* pyr-tdep.c (pyr_do_registers_info): Change stdout to gdb_stdout.
+	(frame_locals_address): Change stderr to gdb_stderr.
+	(frame_args_addr): Ditto.
+
+	* pyr-xdep.c (fetch_inferior_registers): Change stderr to
+	gdb_stderr.
+
+	* serial.c (serial_close): Call gdb_fclose, not fclose on a
+	GDB_FILE.
+
+	* serial.c (serial_logchar): Change chtype to ch_type.  sigh.
+
+	* solib.c (look_for_base): The parameter to file must be 
+	of type FILE *. So cast exec_bfd -> iostream in the call
+	to fileno as a FILE *, not a GDB_FILE *. This will work because
+	exec_bfd -> iostream is declared and given a value in bdf and 
+	bfd will continue to use FILE rather than GDB_FILE.
+
+	* solib.c: 
+	(solib_add): Remove references to exec_ops.
+
+	* solib.c: 
+	(solib_add): Update exec_ops.to_sections
+
+	* solib.c: 
+	(symbol_add_stub): Added params to call to symbol_file_add
+
+	* solib.h: 
+	(SOLIB_REMOVE_INFERIOR_HOOK): New macro. defined to 0.
+	functionality not implemented for this target.
+
+	* solib.h: Added macro definitions. These macros generate
+	  error messages for solaris??
+	  (SOLIB_CREATE_CATCH_LOAD_HOOK)
+	  (SOLIB_CREATE_CATCH_UNLOAD_HOOK)
+	  (SOLIB_HAVE_LOAD_EVENT)
+	  (SOLIB_LOADED_LIBRARY_PATHNAME)
+	  (SOLIB_HAVE_UNLOAD_EVENT)
+	  (SOLIB_UNLOADED_LIBRARY_PATHNAME)
+	  (SOLIB_IN_DYNAMIC_LINKER)
+	  (SOLIB_RESTART)
+
+	* somread.c (is_in_import_list): Ditto.
+
+	* somread.c (som_symfile_read): Added some comments
+
+	* somread.c (som_symfile_read): Read in import and export lists.
+	(som_symtab_read): Change test for dynamic executable.
+	(is_in_import_list): New function. Check if a given symbol name
+ 	is in the import list.
+	(init_import_symbols): New function. Read in and initialize the 
+	som import list.
+	(init_export_symbols): New function. Read in and initialize the 
+	som export list.
+
+	* somread.c: 
+	(som_symfile_read): Fix missing comment delimiters
+
+	* somsolib.c (DLD_FLAGS_MAPPRIVATE): New macro. 
+	Define bit of __dld_flags in HP-UX a.out files.
+	(DLD_FLAGS_HOOKVALID): Ditto.
+	(DLD_FLAGS_LISTVALID): Ditto.
+	(DLD_FLAGS_BOR_ENABLE): Ditto.
+	(som_solib_total_st_size): Cumulative size in bytes of the 
+	symbol tables of all shared objects on the so_list_head list.
+	(som_solib_st_size_threshhold_exceeded): Threshold for adding symbols
+	for shlibs.
+	(som_solib_sizeof_symbol_table): New function. Computes size of 
+	symbol table for a shlib.
+	(som_solib_load_symbols): New function. Load symbols from shlib.
+	(som_solib_add): Detect if __dld_list is not valid. 
+	Record main program's symbol table size.
+	Load symbols if called from command line.
+	Keep threshold into account when loading shlib symbols.
+	(som_solib_create_inferior_hook): Use dld_flags macros.
+	(som_sharedlibrary_info_command): Let user know if symbols were 
+	not loaded.
+	(som_solib_restart): Discard all the shlibs descriptors.
+	(_initialize_som_solib): Chenge help message for auto-solib-add
+	command.
+	Set threshold for symbol table to 50 megabytes.
+
+	* somsolib.c (_initialize_som_solib): Added call to som_solib_restart.
+	(som_solib_restart): New function
+	(som_solib_in_dynamic_linker): New function
+	(som_solib_desire_dynamic_linker_symbols): New function
+	(som_solib_unloaded_library_pathname): New function
+	(som_solib_loaded_library_pathname): New function
+	(som_solib_library_pathname): New function
+	(som_solib_have_unload_event): New function
+	(som_solib_have_load_event): New function
+	(som_solib_create_catch_unload_hook): New function
+	(som_solib_create_catch_load_hook): New function
+	(som_solib_create_inferior_hook): Rewritten
+	dld_cache: New struct
+	addr_and_unwind_t: New struct
+	(find_unwind_entry) added prototype
+
+	* somsolib.c (som_solib_create_inferior_hook): Introduce new local
+ 	msymbol2 and change some msymbol's to msymbol2's -- was clobbering
+ 	msymbol, passing a NULL to lookup_minimal_symbol_solib_trampoline,
+	and ultimately core dumping with a SEGV.
+
+	* somsolib.c: 
+	Include assert.h
+	(som_solib_mapped_entry): Additional comments for text_addr, 
+	text_link_addr, text_end, and tsd_start_addr fields. Commenting
+	out 2 tsd fields, __data_start and __data_end. 
+	(som_solib_add_solib_objfile): Add params to calls to symbol_file_add.
+	Add some code for distinguishing between a shared library and other 
+	objfiles. This appears to be a prelude to thread local storage.	
+	(som_solib_load_symbols): Changes to printf statement 
+	enclosed by SOLIB_DEBUG ifdef.
+	(som_solib_add): Change comment to correctly specify path
+	to end.o -- /opt/langtools/lib/end.o. changes to printf statement
+ 	enclosed by SOLIB_DEBUG ifdef.
+	Removed several SOLIB_DEBUG ifdefs and the associated printfs.
+	Add code to find the start address for the object file's thread 
+	local storage
+	(som_solib_create_inferior_hook): Fix warning messages use correct
+	path to end.o -- /opt/langtools/lib/end.o. Change control flow. 
+	No longer user early returns from function is cases of error.
+	(reset_inferior_pid): New function
+	(som_solib_remove_inferior_hook): New function
+	(so_lib_thread_start_addr): New function. used for tsd.
+
+	* somsolib.c: Removed references to ASSERT macro.
+
+	* somsolib.c: Add debugging macro.
+	(struct som_solib_mapped_entry): Add new field tsd_start_addr.
+	(struct so_list): Added new field solib_addr.
+	(som_solib_add_solib_objfile): New function. 
+	(som_solib_load_symbols): Rewritten.
+	(som_solib_add): Make sure we don't load the symbols in if the 
+	threshold was exceeded.
+	(som_solib_get_solib_by_pc): New function. Return the address of
+ 	handle of the shared library.
+	(som_solib_restart): Disable breakpoints at restart.
+	(_initialize_som_solib): Set threshold to 100 megabytes.
+
+	* somsolib.c: Add include of fcntl.h so that O_RDONLY is defined.
+
+	* somsolib.h (DISABLE_UNSETTABLE_BREAK): New macro.
+	(PC_SOLIB): New macro.
+
+	* somsolib.h: 
+	(SOLIB_CREATE_CATCH_LOAD_HOOK): Define
+	(SOLIB_CREATE_CATCH_UNLOAD_HOOK): Define
+	(SOLIB_HAVE_LOAD_EVENT): Define
+	(SOLIB_LOADED_LIBRARY_PATHNAME): Define
+	(SOLIB_HAVE_UNLOAD_EVENT): Define
+	(SOLIB_UNLOADED_LIBRARY_PATHNAME): Define
+	(SOLIB_IN_DYNAMIC_LINKER): Define
+	(SOLIB_RESTART): Define
+
+	* somsolib.h: 
+	(SOLIB_REMOVE_INFERIOR_HOOK): New macro. defined to use 
+	som_solib_remove_inferior_hook.
+
+	* somsolib.h: 
+	(som_solib_create_catch_load_hook) 
+	(som_solib_create_catch_unload_hook)
+	(som_solib_have_load_event)
+	(som_solib_loaded_library_pathname)
+	(som_solib_have_unload_event)
+	(som_solib_unloaded_library_pathname)
+	(som_solib_in_dynamic_linker)
+	Fix prototypes to use type names, not parameter names.
+
+	* source.c (find_source_lines): Make non static.
+	(open_source_file): Ditto.
+	(source_full_path_of): New function.
+	(print_source_lines): Rename to print_source_lines_base and make
+	static; formatting.
+	(print_source_lines): New function.
+	(forward_search_command): Tui changes.
+	(reverse_search_command): Tui changes.
+	(_initialize_source): Add xdb and dbx compatibility commands.
+
+	* source.c (list_command): Handle case of odd number of source 
+	lines to display.
+
+	* source.c: 
+	(source_full_path_of): New function. file was overlooked
+	in merge ;-/.
+	
+	* stack.c (func_command): Make high bound be <, not <=.
+
+	* stack.c (_initialize_stack): For the backtrace command, delete
+	the help line about usage, since this has to be a valid help
+	message for the 'where' command too.
+	
+	* stack.c (current_frame_command): Add a check for the 
+	existance of a stack. If there is no stack produce an
+	error message and exit.
+	
+	* stack.c (down_silently_base, up_silently_base,
+ 	args_plus_locals_info, print_frame_info_base,
+ 	print_stack_frame_base, print_stack_frame_base_stub): Declare.
+	(print_frame_local_vars): Add'l parameter.
+	(print_stack_frame_stub): New version created, old version renamed
+ 	to show_and_print_stack_frame_base_stub.
+	(print_stack_frame_base_stub, print_only_stack_frame_stub,
+ 	show_and_print_stack_frame, print_only_stack_frame,
+ 	stack_publish_stopped_with_no_frame, print_frame_info,
+ 	show_stack_frame, backtrace_full_command, args_plus_locals_info,
+	select_and_print_frame, select_and_maybe_print_frame,
+	current_frame_command, func_command): New functions.
+	(backtrace_command): New function, old renamed to
+	backtrace_command_1.
+	(print_block_frame_locals, print_frame_local_vars): Additional
+	parameter, number of tabs.
+	(up_silently_command): New function, old renamed to
+	up_silently_command_base.
+	(down_silently_command): New function, old renamed to
+	down_silently_base.
+	(_initialize_stack): Register new commands based on values of
+	xdb_commands and dbx_commands variables.
+	
+	* stack.c (func_command): Make high bound be <, not <=.
+	
+	* stack.c (parse_frame_specification): Fix prototype to match
+	function definition.
+	(show_and_print_stack_frame_stub): Fix name.
+	(select_and_print_frame): Change uncaught tuiDO call.
+	
+	* stack.c (up_silent_base): Rename from up_silently_command_base.
+	
+	* symfile.c (symbol_file_command): Only call SOLIB_RESTART if it's
+	defined.
+
+	* symfile.c (add_psymbol_with_dem_name_to_list): New function.
+	Adds a symbol with a long value to a psymtab. Differs from 
+	add_psymbol_to_list in taking both a mangled and a demangled name.
+	
+	* symfile.c (compare_psymbols): Call strcmp directly, instead of
+	using macro.
+	
+	* symfile.c (symbol_file_add): Reindent portions.
+	(symbol_file_command): Add call to tuiDo.
+	
+	* symfile.c (symbol_file_command): Only call SOLIB_RESTART if it's
+	defined.
+
+	* symfile.c (symfile_bfd_open): Add code to call PXDB on hpux, if
+	the file has not already been processed by pxdb.
+	Added define USE_PXDB.
+	
+	* symfile.c (symfile_bfd_open): Change parenthesis positioning
+	around call to hpread_pxdb_check.
+	
+	* symfile.c (symfile_bfd_open): Make not static. 
+	(RESET_HP_UX_GLOBALS): New macro. Resets globals when new symbol
+	file loaded.
+	(USE_PXDB): Not needed. Removed.
+	(symbol_file_add): Add HP specific code to deal with pxdb.
+	(symbol_file_command): Reset HP specific globals if new symbol file
+	loaded.
+	(symfile_bfd_open): Comment out checking for pxdb.
+	(reread_symbols): Reset HP specific globals.
+	
+	* symfile.c (symfile_bfd_open): Uncomment hpus specific code.
+	
+	* symfile.c: 
+	(symbol_file_add): Add user_loaded and is_solib parameters.
+	fixed number of parameters in call to allocate_objfile
+	(symbol_file_command): Added call to SOLIB_RESTART macro.
+	fixed number of parameters in calls to symbol_file_add.
+	(add_symbol_file_command): Fixed number of parameters in calls to 
+	symbol_file_add.
+	
+	* symfile.c: Added prototype for hpread_pxdb_check.
+	
+	* symfile.c: Changed HPUX_SNAP1 ifdef to HPUXHPPA. enclosed calls to 
+	  RESET_HP_UX_GLOBALS with an HPUXHPPA ifdef
+	
+	* symfile.h (symfile_bfd_open): Add protptype.
+	
+	* symfile.h: Add prototype for add_psymbol_with_dem_name_to_list.
+	
+	* symfile.h: Clarify purpose of auto_solib_add.
+	
+	* symmisc.c (maintenance_print_symbols): Call gdb_fclose, not
+	fclose on a GDB_FILE* during cleanup.
+	(maintenance_print_psymbols): Call gdb_fclose, not fclose on a
+	GDB_FILE* during cleanup.
+	(maintenance_print_msymbols): Call gdb_fclose, not fclose on a
+	GDB_FILE* during cleanup.
+	
+	* symmisc.c (maintenance_print_symbols): Gdb_fclose now takes a
+	GDB_FILE ** parameter. Fix the local GDB_FILE variables and the 
+	call to make_cleanup.
+	(maintenance_print_psymbols): Ditto
+	(maintenance_print_msymbols): Ditto
+	
+	* symmisc.c (print_objfile_statistics): Close quotes in 
+	output strings.
+
+	* symmisc.c: 
+	(Print_symbol): Add LOC_INDIRECT to switch statement
+	(print_partial_symbols): Add LOC_INDIRECT to switch statement
+
+	* symtab.c (find_pc_sect_psymtab): High bounds should be <, not <=.
+	(find_pc_sect_symtab): Ditto.
+
+	* symtab.c (hp_som_som_object_present): New flag to indicate HP 
+	compiled code.
+	(find_pc_sect_psymtab): Change tests to make sure we are checking
+	the texthigh adress as well.
+	(lookup_transparent_type): New function.  Look up a type name
+	in the struct_namespace.  The type returned must not be opaque.
+	(find_pc_sect_symtab): Make sure we check the address 'pc' itself,
+	too.
+	(find_addr_symbol): Prepare to handle LOC_INDIRECT address class, but
+ 	leave it commented out.
+	(find_pc_sect_line): Return correct information if pc is in import
+	or export stub (trampoline).
+	(decode_line_1): Skip two chars, if they are '$$'. Like for HP's
+	$$dyncall. Handle cases in which varaible and function names can start 
+	with $.
+	(overload_list_add_symbol): If cannot demangle name, use it as is.
+	Free string after use.
+	(make_symbol_overload_list): Initialize oload_name to NULL and 
+	oload_name_len to 0. If demangle not successful, use name as it is.
+	Free string after use.
+
+	* symtab.c (lookup_symbol): Changed call to find_pc_sect_symtab,
+ 	to the original find_pc_symtab, in HP added fragment.
+
+	* symtab.c (lookup_symbol): Change HPUX_SNAP1 ifdef to a HPUXHPPA ifdef
+
+	* symtab.c (lookup_symbol): Ifdef the searching of symbol in the 
+	minimal symbol tables, for hpux we move this check at the end 
+	of the function.
+	Before we error out if symbol is not found in the symtab, look 
+	in the statics. 
+	Before erroring out if static symbol not found look in the globals.
+
+	* symtab.c (lookup_symbol): Return symbol as soon as found.
+	(decode_line_1): Check whether we have a conditional break. Temporarily
+	remove it from the line, to not confure perenthesis checking.
+	Handle namespaces.
+	(overload_list_add_symbol): New function. Overload
+	resolution support.
+	(make_symbol_overload_list): Ditto.
+	
+	* symtab.c: 
+	(find_template_name_end): New prototype decl.
+	(lookup_symbol):  When a global or static symbol shows up in the 
+	psymtab table, but not the symtab table, tell the user that
+	the symbol may be an inlined function or a template function and
+	provide some guidance to the user about how to more fully 
+	specify the symbol.
+	(lookup_transparent_type):  When a global or static symbol shows up 
+	in the psymtab table, but not the symtab table, tell the user that
+	the symbol may be an inlined function or a template function and
+	provide some guidance to the user about how to more fully 
+	specify the symbol. 
+	(decode_line_1): Handle template function specification when decoding a
+	line. May need to be ifdefed for HP's aCC?
+	(_initialize_symtab): Handle dbx commands.
+
+	* symtab.h (address_class): Add new address calss for 
+	LOC_THREAD_LOCAL_STATIC and LOC_INDIRECT.
+	(lookup_transparent_type): Add prototype.
+	(exception_event_kind): New enum for exception catchpoints.
+	(exception_event_record): New structure for exception catchpoints.
+	(CURRENT_EXCEPTION_KIND): New macro.
+	(CURRENT_EXCEPTION_CATCH_SAL): New macro. 
+	(CURRENT_EXCEPTION_CATCH_LINE): New macro. 
+	(CURRENT_EXCEPTION_CATCH_FILE): New macro. 
+	(CURRENT_EXCEPTION_CATCH_PC): New macro. 
+	(CURRENT_EXCEPTION_THROW_SAL): New macro. 
+	(CURRENT_EXCEPTION_THROW_LINE): New macro. 
+	(CURRENT_EXCEPTION_THROW_FILE) new macro.: 
+	(Current_EXCEPTION_THROW_PC): New macro. 
+
+	* symtab.h(make_symbol_overload_list): Add prototype.
+
+	* symtab.h: 
+	(symbol_file_add): Add new params to function decl.
+
+	* target.c (cleanup_target): Changed casting of default functions for
+	to_has_forked, to_has_vforked, to_pid_to_exec_file to get rid of
+	warnings.
+
+	* target.c (cleanup_target): Changed the default functions for
+	  to_pid_to_exec_file and to_core_file_to_sym_file
+
+	* target.c (cleanup_target): Fixed PARAMS for to_has_syscall_event
+
+	* target.c (cleanup_target): Syntax error, mismatched paranthesis.
+
+	* target.c: 
+	  (Default_clone_and_follow_inferior): New funct prototype declaration
+	    and function definition
+	  (dummy_target): More target_ops vector changes for HPUX
+	     new fields. ifdefed for HPUX_SNAP2. New fields are
+	     to_post_wait, to_post_startup_inferior
+	     to_acknowledge_created_inferior, to_clone_and_follow_inferior,
+	     to_post_follow_inferior_by_clone,  to_create_catch_fork_hook,
+	     to_create_catch_vfork_hook, to_has_forked, to_has_vforked,
+	     to_post_follow_vfork, to_pid_to_exec_file
+	  (de_fault): Add new HPUX specific target_ops operations to
+  	     the de_fault macro
+	  (INHERIT): Add new HPUX specific target_ops operations to the
+	     INHERIT macro
+	  (find_default_clone_and_follow_inferior): New funct definition
+	  (debug_to_post_wait): New funct
+	  (debug_to_post_startup_inferior): New funct
+	  (debug_to_acknowledge_created_inferior): New funct
+	  (debug_to_clone_and_follow_inferior): New funct
+	  (debug_to_post_follow_inferior_by_clone): New funct
+	  (debug_to_create_catch_fork_hook): New funct
+	  (debug_to_create_catch_vfork_hook): New funct
+	  (debug_to_has_forked): New funct
+	  (debug_to_has_vforked): New funct
+	  (debug_to_post_follow_vfork): New funct
+	  (setup_target_debug): Initialize new target_ops vector fields.
+
+	* target.c: 
+	(Cleanup_target): Fixed the return type on a few of the 
+	  default function values.
+
+	* target.c: 
+	(Dummy_target): Add 3 new fields
+	(nosupport_runtime): New function, used in cleanup_target
+	(cleanup_target): Changes in the de_fault macro, both to
+	accomodate the new target_ops vector fields and to use
+	more accurate default functions.
+	(update_current_target): Add new target_ops vector fields to the 
+	INHERIT macro
+	(generic_mourn_inferior): The call to breakpoint_init_inferior now takes a 
+	parameter
+	(normal_pid_to_str): Adding a \0 to the end of buf.
+	(debug_to_has_syscall_event): New func
+	(debug_to_enable_exception_callback): New func
+	(debug_to_get_current_exception_event): New func
+	(setup_target_debug): Initialize the 3 new target_ops vector fields
+
+	* target.c: 
+	(Struct signals): Fix message associated with SIGRETRACT.
+
+	* target.c: 
+	  (Dummy_target): Fix syntax error
+	  (cleanup_target): Changed the default values for the new 
+	     target_ops vector fields. HP folks inappropriately set
+	     most of them to noprocess(). They should be a mixture
+	     of ignore() and return_zero().
+
+	* target.c: 
+	(Dummy_target): Add new target_ops vector fields and their initializations
+	(cleanup_target): Added new new target_ops vector fields to the de_fault 
+	  macro definition.
+	(update_current_target): Added new new target_ops vector fields to the INHERIT 
+	  macro definition
+	(return_one): New function, used by the de_fault macro
+	(debug_to_post_attach): New function
+	(debug_to_wait): Added new cases: Target_WAITKIND_FORKED, TARGET_WAITKIND_VFORKED,
+	  TARGET_WAITKIND_EXECD
+	(debug_to_insert_fork_catchpoint): New function
+	(debug_to_remove_fork_catchpoint): New function
+	(debug_to_insert_vfork_catchpoint): New function 
+	(debug_to_remove_vfork_catchpoint): New function
+	(debug_to_can_follow_vfork_prior_to_exec): New function
+	(debug_to_insert_exec_catchpoint): New function 
+	(debug_to_remove_exec_catchpoint): New function
+	(debug_to_core_file_to_sym_file): New function
+	(setup_target_debug): Give new fields in current_target target_ops vector values.
+
+	* target.c: Hp merge, 4/15/98 snapshot
+	  There are new target_ops fields that pertain only
+	  to HPUX. All the changes relate to this. First,
+	  new fields are added to the dummy_target target_ops
+ 	  vector: To_require_attach, to_require_detach.
+
+	* target.c: Remove HPUX_SNAP1 and HPUX_SNAP2 ifdefs
+
+	* thread.c (info_threads_command): Call print_only_stack_frame
+	instead of print_stack_frame.
+	(_initialize_thread): Make t an alias for thread only if
+	xdb_commands is not set.
+
+	* thread.c (thread_command): If no arguments, don't generate an
+	error, instead tell the user which thread is current.
+	(info_threads_commands): Don't lose the users position within the
+	current thread -- remember it and then restore it.
+
+	* thread.c: 
+	(struct thread_info): Add stepping_through_sigtramp field
+	(add_thread): Initialize stepping_through_sigtramp field
+	(load_infrun_state): Add stepping_through_sigtramp param and
+	make sure it gets assigned a value.
+	(save_infrun_state): Add stepping_through_sigtramp param and
+	make sure that the value gets saved.
+	(info_threads_command): Ifdefing some local variables and 
+	code for HPUXHPPA. HP folks want print the tid rather than pid?
+	Also, looks like the HP folks solved the same thread switching
+	problem that 4.17 solves. Taking 4.17.
+	(restore_current_thread): Print out the current frame after 
+	switching threads.
+	(thread_apply_all_command): Ifdefing a print statement for
+	HPUXHPPA. The HP folks want to print out a tid rather than pid?
+	(thread_apply_command): Ifdefing a print statement for
+	HPUXHPPA. The HP folks want to print out a tid rather than pid?
+	(thread_command): Decided not to take HP change.
+
+	* thread.c: Fixing gdb core dump problem causing many testsuite
+	    failures.
+	    (add_thread): Remove call to bpstat_clear, initialize
+	      tp->stepping_through_solib_catchpoints = NULL;
+
+	* thread.c: Changes for catchpoints, shared libaries, 
+	  (thread_info): Additional fields in the thread_info struct
+	     for stepping_through_solib_after_catch and 
+	     stepping_through_solib_catchpoints.
+	  (add_thread): Initialize the new thread_info fields.
+	  (load_infrun_state): Additional parameters for handling
+	     catchpoints and shared libraries.
+	  (save_infrun_state): Additional parameters for handling
+	     catchpoints and shared libraries.
+
+	* top.c (command_loop): Initialize space_at_cmd_start to 0.
+	(set_prompt): New function.
+	(togglelist, stoplist): New command lists.
+	(command_loop): Tui changes -- paranoia to make sure
+	insert mode is off when not editing.
+	(quit_force): Clean up tui on exit.
+	(init_main): Make definition of info status command dependent upon
+	dbx mode not being set.
+	(fputs_unfiltered_hook): Changed stream parameter from FILE 
+	to GDB_FILE
+	(flush_hook): Changed stream parameter from FILE to GDB_FILE
+
+	* top.h (set_prompt): Declare.
+	
+	* typeprint.c (whatis_exp): Decide real runtime type. For the vtable
+	case.
+
+	* utils.c (query): Changes to prevent cursor from jumping around in the
+	TUI. Call tuiBufferGetc explicitly, rather than passing it 
+	into tuiDo. The tuiDo function does some additional work
+	that is inappropriate when handling queries. 
+	(GDB_FILE_ISATTY): New macro that takes a GDB_FILE param and 
+	determines whether or not it's using a tty.
+	(gdb_file_isatty); called by the GDB_FILE_ISATTY macro. Does
+	the actual work
+	(init_page_info): Call GDB_FILE_ISATTY rather than ISATTY
+	(print_spaces): Fix parameter to fputc. fix call to 
+	gdb_file_adjust_strbuf.
+	(gdb_file_init_astring): Fix parameter to xmalloc
+	(gdb_file_deallocate): New function to deallocate
+	a GDB_FILE object and possibly a string buffer
+	(gdb_file_init_astring): Initialize buffer as the empty
+	string.  Indent GNU style.
+	(gdb_fopen): Gdb_fopen is called if the GDB_FILE object is
+	actually afile rather than astring. The routine now allocates space
+	for a GDB_FILE object and initializes its fields in addition to 
+	performing an fopen.
+	(gdb_flush): Fix the parameter passed into fflush. It's now
+ 	stream->ts_filestream.
+	(gdb_fclose): Pass in an object of type GDB_FILE **. Fix parameter
+ 	to fclose. It's now tmpstream->ts_filestream. Make sure to free
+ 	the GDB_FILE object and set the GDB_FILE * object to NULL.
+	(gdb_adjust_strbuf): New function. Determine if the current
+ 	ts_strbuf field contains sufficient space to concatenate a string
+ 	of length n on the end.  If not, then reallocate the ts_strbuf.
+	(print_spaces): Check to see if the GDB_FILE is afile or
+ 	astring. If it is astring, then adjust the size of the ts_strbuf
+ 	field and concatenate the correct number of spaces onto the end of
+ 	the buffer. Otherwise continue to use fputc.
+	(gdb_file_get_strbuf): New function. return a ptr to the ts_strbuf
+ 	field in a GDB_FILE object.
+	(gdb_file_init_astring): New function to allocate space for and
+ 	initialize a GDB_FILE object when it is an astring.
+	(set_width): Declare it.
+	(pagination_enabled): Define it.
+	(query): Tui changes.
+	(init_page_info, set_width): New functions.
+	(set_width_command): Call set_width.
+	(_initialize_utils): Replace termcap stuff with call to
+	init_page_info; if xdb_commands set, define am and sm commands;
+	define pagination as a set/show command.
+	(vfprintf_maybe_filtered): Change FILE to GDB_FILE.
+	(fputs_maybe_filtered): Ditto.
+	(print_spaces): Ditto.
+	(gdb_printchar): Ditto.
+	(gdb_flush): Ditto.
+	(fputs_filtered): Ditto.
+	(vfprintf_filtered): Ditto.
+	(vfprintf_unfiltered): Ditto.
+	(fprintf_filtered): Ditto.
+	(fprintf_unfiltered): Ditto.
+	(fprintfi_filtered): Ditto.
+	(print_spaces_filtered): Ditto.
+	(fprintf_symbol_filtered): Ditto.
+	(gdb_fclose): New function.
+
+	* valops.c (call_function_by_hand): Assign to param_type only
+	if function has parameters.
+
+	* valops.c (call_function_by_hand): Ifdef the
+	HP_COMPILED_TARGET stuff.
+	(value_arg_coerce): Ditto.
+
+	* valops.c (call_function_by_hand): Make sure param_type is 
+	initialized to NULL.
+
+	* valops.c (find_rt_vbase_offset): Add parameter to value_at.
+	(value_rtti_type): Ditto.
+	(value_full_object): Ditto.
+
+	* valops.c (search_struct_field_aux): Fixed mismatching parenths
+
+	* valops.c (search_struct_field_aux): Make sure TYPE_TAG_NAME
+	is not null before copying it. 
+	
+
+	* valops.c (search_struct_field_aux): Set found_class_name to null
+	if class has no name (anon unions case). Adjust base_addr 
+	computation.
+
+	* valops.c (value_arg_coerce): Change final arg to int.
+
+	* valops.c (value_arg_coerce): Remove the conditional on HP
+	compiled target, for doing coercion of float to double. Removed
+	third parameter, using_gcc.
+	(call_function_by_hand): Do not use HP_COMPILED_TARGET, just
+	use the gcc_compiled variable.
+
+	* valops.c (value_cast): Take case of the enclosing_type and 
+	pointer_to_offset fields.
+	(value_at): Use VALUE_CONTENTS_ALL_RAW
+	(value_fetch_lazy): Ditto
+	(value_assign): Handle enclosing_type, embedded_offset and 
+	pointed_to_offset fields.
+	(value_repeat): Use VALUE_CONTENTS_ALL_RAW and VALUE_ENCLOSING_TYPE.
+	(value_ind): Set enclosing_type and embedded_offset correctly,
+	for a pointer value being dereferenced. Target memory bytes 
+	corresponding to the size of the enclosing type are retreived.
+	(value_addr): Handle enclosing_type and pointed_to_offset.
+	(value_push): Use VALUE_CONTENTS_ALL and VALUE_ENCLOSING_TYPE.
+	(value_arg_coerce): Coerce floats to doubles only if gcc was not
+	used to compile the target.
+	(call_function_by_hand): Handle pointers to functions as paramters.
+	(value_array): Use VALUE_CONTENTS_ALL and VALUE_ENCLOSING_TYPE.
+	(search_struct_method): Produce more informative error message.
+	(find_rt_vbase_offset): Deal with negative offsets.
+	(value_find_oload_method_list): New function. Return the list of 
+	overloaded methods of a specified name.
+	(find_method_list): New function. Search through the methods of an 
+	object (and its bases) to find a specified method.
+	(value_full_object): New function. Given a value, check its real 
+	run-time type.
+	(value_rtti_target_type): New function. Given a pointer value V, find 
+	the real (RTTI) type of the object it points to.
+	(value_rtti_type): New function. Find the real run-time type of a 
+	value using RTTI.
+
+	* valops.c: Include gdbcmd.h
+	Set global overload_resolution to 0.
+	(find_function_in_inferior): Modify error message.
+	(value_allocate_space_in_inferior): Modify error message.
+	(value_cast): Deal with HP/aCC peculiarities.
+	(value_of_variable): Use SYMBOL_SOURCE_NAME instead of SYMBOL_NAME.
+	(value_addr): Modify address value by adding the embedded offset.
+	(value_ind): Modify the address of the object by the pointed_to_offset.
+	(call_function_by_hand): Do not do any extra alignment if not needed.
+	Fetch the return value from the stack rather then from the register, 
+	for the hppa architecture.
+	(search_struct_field): Rewritten. Now this function uses 
+	search_struct_field_aux to do all the work.
+	(search_struct_field_aux): New function. This is the old 
+	search_struct_field rewritten.
+	(find_rt_vbase_offset): Give error if virtual table pointer is not good.
+	(find_overload_match): New function. Find the best function that
+	matches on the argument types according to the overload resolution
+	rules.
+	(_initialize_valops): Add new set/show command for overload-resolution.
+	
+	* value.h (VALUE_POINTED_TO_OFFSET): New macro.
+	Add field pointed_to_offset to value structure.
+	Add prototypes for new functions in valops.c.
+
+	* value.h (write_register_pid): Change prototype to match
+	function.
+
+	* value.h: Hp merge, 4/15/98 snapshot
+	  Added parameter to val_print func decl.
+	  Added new macro, VALUE_EMBEDDED_OFFSET, and
+	  new func decl, find_rt_vbase_offset, for C++
+	  support.
+	
+	* values.c (allocate_value): Allocate also for value_embedded_offset 
+	and value_enclosing_type.
+	(value_copy): Copy value_embedded_offset and value_enclosing_type too.
+	Use all_raw in copying the value itself.
+	(value_primitive_field): Add handling of base subobjects.
+
+	* values.c (value_copy): Copy the pointed_to_offset as well.
+	(allocate_value): Allocate the pointed_to_offset as well.
+	(value_virtual_fn_field): Rewrite.
+
+	* values.c (value_primitive_field): Adjust embedded offset and
+	offset calculation.
+
+	* values.c (value_static_field): Take into consideration that static 
+	data members can be minimal symbols too.
+
+	* values.c (value_virtual_fn_field): Fix call to value_at.
+
+	* win32-nat.c (handle_load_dll): Added params to call to symbol_file_add.
+
+	Other changes have to do with XDB compatability. Leave oout
+	for now.
+
+	defs.h (vfprintf_filtered): Change FILE to GDB_FILE in decl.
+	(fprintf_filtered): Ditto.
+	(fprintfi_filtered): Ditto.
+	(vfprintf_unfiltered): Ditto.
+	(fprintf_unfiltered): Ditto.
+
+	infcmd.c (_initialize_infcmd): If xdb_commands is set, make S an
+	alias for next and define R, lr, g.  Define go.
+	 
+	pyr-tdep.c (pyr_print_insn): Change FILE to GDB_FILE.
+
+
+	* breakpoint.c (create_temp_exception_breakpoint): #If it out --
+ 	nothing calls it.
+	(bpstat_stop_status): Don't call SOLIB_HAVE_LOAD_EVENT if it's not
+ 	defined; don't call SOLIB_HAVE_UNLOAD_EVENT if it's not defined.
+	(bpstat_get_triggered_catchpoints): If we don't have shared
+ 	library support, then don't call SOLIB_LOADED_LIBRARY_PATHNAME nor
+ 	SOLIB_UNLOADED_LIBRARY_PATHNAME.
+	(watch_command_1): Don't require a run before a watch command
+ 	unless we're on HP [it's an HP OS bug, not a generic limitation]
+	(catch_load_command_1): Don't define if no shared libraries.
+	(catch_command_1): Don't claim to support fork catchpoints unless
+ 	CHILD_INSERT_FORK_CATCHPOINT is defined, don't claim to support
+ 	vfork catchpoints unless CHILD_INSERT_VFORK_CATCHPOINT is defined,
+ 	don't clain to support shared library load catchpoints if shared
+ 	libraries aren't supported, and don't claim to support exec
+ 	catchpoints unless CHILD_INSERT_EXEC_CATCHPOINT is defined
+
+	  There are new target_ops vector fields that pertain
+	  only to HPUX. Added the to_require_attach and 
+	  to_require_detach fields to exec_ops. These new
+ 	  fields are ifdef'ed for HPUX_SNAP1.
+
+	* breakpoint.h:
+	    Fix compile error in enum bptype.
+
+	* coff-solib.h:
+	    Fixed a number of macro definitions. SOLIB_LOADED_LIBRARY_PATHNAME,
+	    SOLIB_HAVE_LOAD_EVENT, SOLIB_HAVE_UNLOAD_EVENT, 
+	    SOLIB_UNLOADED_LIBRARY_PATHNAME, SOLIB_IN_DYNAMIC_LINKER. These
+	    macros are only meaningful (for now) for SOM. So, all 
+	    the macros were defined as error(...), but were used in
+	    conditions. This caused the compile to crap out. I redefined 
+	    these (for now) to be 0. 
+
+	* procfs.c:
+	    (procfs_create_inferior): Fix call to fork_inferior -- need another
+	       parameter. 
+	
+	* solib.h:
+	    Fixed a number of macro definitions. SOLIB_LOADED_LIBRARY_PATHNAME,
+	    SOLIB_HAVE_LOAD_EVENT, SOLIB_HAVE_UNLOAD_EVENT, 
+	    SOLIB_UNLOADED_LIBRARY_PATHNAME, SOLIB_IN_DYNAMIC_LINKER. These
+	    macros are only meaningful (for now) for SOM. So, all 
+	    the macros were defined as error(...), but were used in
+	    conditions. This caused the compile to crap out. I redefined 
+	    these (for now) to be 0. 
+
+	* valops.c:
+	    (search_struct_field): Undeclared local variable, "assigned".
+	    (find_rt_vbase_offset): Fixed call to value_at
+
+	* value.h: Fix signature for find_rt_vbase_offset funct decl
+ 	(missing a param)
+
+Wed Dec 30 17:48:12 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	From J.T. Conklin  <jtc@redbacknetworks.com>:
+	* i386-stub.c: Fix error string in last change.
+
+1998-12-30  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* utils.c: <Readline/readline.h> instead of "readline/readline.h".
+
+	* configure.in (TERM_LIB): Search for the appropriate term library
+	on the host system.
+	* configure: Regenerated.
+	* Makefile.in (TERMCAP): Set based on autoconf check.
+	* config/*/*.mh: Don't override TERMCAP setting.
+
+Wed Dec 30 17:23:14 1998  Mark Alexander  <marka@cygnus.com>
+
+	* value.c (value_virtual_fn_field): Handle the situation where
+	vtbl is a pointer to a structure instead of a pointer to an array.
+
+Mon Dec 28 17:43:36 1998  David Taylor  <taylor@texas.cygnus.com>
+
+	The following changes were made by Jim Blandy <jimb@cygnus.com>,
+ 	Edith Epstein <eepstein@cygnus.com>, Elena Zannoni
+ 	<ezannoni@cygnus.com> Stan Shebs <shebs@cygnus.com>, and David
+ 	Taylor <taylor@cygnus.com>, as part of the project to merge in
+ 	changes originally made by HP; HP did not create ChangeLog
+ 	entries.
+
+	* c-lang.h (cp_print_value_fields): Update prototype; fixed
+ 	prototype decl for c_val_print function -- it needed an
+ 	embedded_offset param; fixed prototype of cp_print_value_fields.
+	Include value.h.
+	(C_LANG_H): Define.
+
+	* c-valprint.c (c_val_print): Add new parameter embedded_offset.
+  	Add embedded_offset to valaddr in function calls.  fix calls to
+ 	val_print, and cp_print_value_fields.  Attempt to determine the
+ 	real type of the object to be printed.  fixed call to
+ 	cp_print_value_fields.  process TYPE_CODE_METHOD as well.  moved
+ 	call to check_typedef out of conditional.  add embedded offset
+ 	param to val_print call.
+
+	(c_value_print): Add new parameter to call to val_print.  Handle
+ 	pointer to class case.  Ensure that const char *, const unsigned
+ 	char * come out without the type but the volatile variants and the
+ 	signed variants don't.
+	
+	* ch-lang.h (chill_val_print): Add parameter to decl.
+
+	* ch-valprint.c: The various print routines have an additional
+ 	parameter. Currently, the new parameter is only used when printing
+ 	C++ expressions. So, in ch-valprint.c, the new parameter is always
+ 	0.  Changes in calls to val_print, chill_val_print, c_val_print
+ 	Affected functions are chill_val_print_array_elements,
+ 	chill_val_print, chill_print_value_fields, chill_value_print.
+
+	* cp-valprint.c add vtable pointers names for aCC (HP) compiler.
+ 	(cp_print_class_method): Print message for HP/aCC case.
+	(cp_print_class_member): Add comments.
+	(cp_print_value): Adjust address computations for virtual base
+ 	classes.  add new parameter 'offset'.  Find correct offset for
+ 	base class in HP/aCC case.  Change call to cp_print_value_fields
+ 	to have extra par.
+	(cp_print_value_fields): Do not print also if the only field is
+ 	the vtable pointer.  Print out vtable ptr, for HP/aCC compiled
+ 	case.  do not print leading '=' in case of anonymous union, or
+ 	struct.  add new parameter 'offset'.  Do not print the vtable
+ 	pointer as a member, in the HP aCC case.  Changed calls to
+ 	val_print to have extra parameter.
+	(cp_print_hpacc_virtual_table_entries): New function. Print vtable
+ 	entries, in HP/aCC compiled case.
+	(cp_print_static_field): Change call to cp_print_value_fields, and
+ 	val_print.
+
+	* d30v-tdep.c (d30v_print_register): Add embedded_offset param
+	to val_print call.
+
+	* defs.h: Additional include files included when TUI is defined.
+	(gdb_file_isatty): New function decl.
+	(GDB_FILE): If TUI is defined, define a structure rather
+ 	than making this an alias for FILE.
+	(gdb_stdout, gdb_stderr): If TUI is defined, then define these
+	as pointers to variables of type GDB_FILE rather than making them
+	be aliases for stdout and stderr.
+	(TUIDO): Add definition conditionalized on definition
+	(or lack thereof) of TUI.
+	(command_class): Add two additional values.
+	(precision_type): New enum.
+	(gdb_fclose): Add decl.
+	(store_address): Change prototype to match function.
+	(tui_version, xdb_commands, dbx_commands): Add decls.
+	(gdb_file_deallocate): New function decl
+	(pa_do_strcat_registers_info): New function decl.
+	(streamtype): New enumerated type to distinguish between output to
+ 	a FILE and output to a buffer.
+	(tui_stream): New struct type, named GDB_FILE.
+	(gdb_stdout): Of type GDB_FILE, will pass this around gdb rather
+ 	than stdout.
+	(gdb_stderr): Of type GDB_FILE, will pass this around gdb rather
+ 	than stderr.
+	(fputs_unfiltered_hook): Change stream parameter from FILE to
+ 	GDB_FILE.
+	(flush_hook): Change stream parameter from FILE to GDB_FILE.
+	(gdb_fclose): Fix decl for gdb_fclose; parameter is now of
+ 	type GDB_FILE **.
+	(gdb_file_adjust_strbuf): New function decl. function lives
+ 	in utils.c.
+	(gdb_file_init_astring): New function decl. function lives
+ 	in utils.c.
+	(gdb_file_get_strbuf): New function decl. function lives in
+ 	utils.c.
+	(source_full_path_of): Declare.
+
+	* exec.c (_initialize_exec): Make definition of file command be
+	dependent upon dbx_commands not being set.
+	(exec_file_attach): New function.
+	(exec_file_command): Call it.
+	(exec_ops): Add new target vector fields.
+
+	* f-lang.h (f_print_type): Change FILE to GDB_FILE in decl.
+	(f_val_print): Ditto.
+	(f_val_print): Add parameter to the function decl.
+
+	* f-valprint.c (_initialize_f_valprint): If xdb_commands is set,
+	define lc command.
+	(f77_create_arrayprint_offset_tbl): Change FILE to GDB_FILE.
+	(f77_print_array): Ditto.
+	(f77_print_array_1): Ditto.
+	(f_val_print): Ditto.
+	(f_val_print): Add a parameter; this new parameter is currently
+ 	only non-zero when handling C++ expressions.  In this file its
+ 	value is always 0.  changed fflush to gdb_flush.
+
+	* gnu-nat.c: (init_gnu_ops): Add new target vector fields.
+	(gnu_create_inferior): Add param to fork_inferior call.
+
+	* hppa-tdep.c (after_prologue): If f is NULL, don't dereference
+ 	it.  if no debug info, return zero telling caller that we need to
+ 	find the end of the prologue via the hard way (instruction
+ 	examination).
+	(find_unwind_entry): Avoid dereferencing a null
+	pointer.
+	(hppa_pid_to_exec_file): Deleted -- no longer used.
+	(hppa_prepare_to_proceeed): Add prototype.
+	(read_unwind_info): Purecov comments, bug fixes.
+	(find_unwind_entry): Purecov comments, bug fixes.
+	(find_stub_with_shl_get): Purecov comments.
+	(frame_chain): Additional parens.
+	(hppa_push_arguments): Changes to commented out version of routine.
+	(hppa_fix_call_dummy): Purecov comments, fix location of end.o.
+	(in_solib_call_trampoline): Purecov comments.
+	(in_solib_return_trampoline): Purecov comments.
+	(setup_d_pid_in_inferior): Fix location of end.o.
+	(initialize_hp_cxx_exception_support): Fix location of end.o.
+	(child_enable_exception_callback): Purecov comments.
+	(pa_do_strcat_registers_info): Has a new parameter, precision, 
+	which is passed into the call to pa_strcat_fp_reg to indicate
+	whether to display the floating point registers using 
+	single or double preceision.
+	(pa_strcat_registers): Introduce local variable, precision, and 
+	pass it into call to pa_strcat_fp_reg.
+	(pa_strcat_fp_reg): Modified function. New parameter, precision,
+	used by function to decide whether to use single or double
+	precision. Also add the code to put a double precision value
+	into a buffer.
+	(pa_do_strcat_registers_info): New routine. called by 
+	tui/tuiRegs.c:_tuiRegisterFormat to place a register name 
+	and value into a string buffer. Interface may change in
+	future. Checking this in so that we have something 
+	functional for HP.
+	(pa_strcat_registers): New routine, called by 
+	pa_do_strcat_registers_info. Does same thing as 
+	pa_print_registers except it takes a stream parameter. 
+	This routine should disappear in future. Checking in
+	so that we have something functional to give HP
+	(pa_strcat_fp_reg): New routine, called by 
+	pa_do_strcat_registers_info and pa_strvat_registers
+	to place a floating point register name and value into
+	a buffer. This interface may change in future. 
+	Checking in so that we have something functional to give HP.
+	(pa_print_fp_reg): Change prototype to match def'n.
+	(pa_register_look_aside): Fix comment immediately before function.
+	Changes to better support stack unwinding, reading and writing
+ 	registers for HPUX.  New includes ptrace.h, bfd.h, dl.h.
+	(internalize_unwinds): Initialize new fields in table.
+	(read_unwind_info): Entries in the table are now more complex
+ 	structures. References of the form ...->table[index].stub_type are
+ 	now ...->table[index].stub_unwind.stub_type.
+	(find_proc_framesize): Add a check for pc == 0.
+	(rp_saved): Entries in the table are now more complex
+ 	structures. References of the form ...->table[index].stub_type are
+ 	now ...->table[index].stub_unwind.stub_type.
+	(frameless_function_invocation): Stub_type becomes
+ 	stub_unwind.stub_type
+	(saved_pc_after_call): Stub_type becomes stub_unwind.stub_type
+	(hppa_frame_saved_pc): Stub_type becomes stub_unwind.stub_type
+	(frame_chain_valid): Stub_type becomes stub_unwind.stub_type
+	(hppa_call_dummy): Stub_type becomes stub_unwind.stub_type
+	(pa_print_fp_reg): Additional params to call val_print
+	(in_solib_call_trampoline): Stub_type becomes
+ 	stub_unwind.stub_type
+	(in_solib_return_trampoline): Stub_type becomes
+ 	stub_unwind.stub_typ
+	(skip_trampoline_code): Additional code to handle external
+ 	dyncalls. Also stub_type becomes stub_unwind.stub_type
+	(hppa_pid_to_exec_file): New funct. FOr HPUX 10.0 and beyond there
+ 	is an explicit ptrace request for getting the pathname associated
+ 	with a process id (pid).
+	(hppa_pid_to_exec_file): Remove unwanted param from call to
+ 	call_ptrace.
+	(args_for_find_stub): New structure.
+	(find_unwind_entry): Deal with null input pc value.
+	(rp_saved): Ditto.
+	For the import stub, return -24 always.
+	(hppa_frame_saved_pc): Save old pc value, to detect we are in a loop.
+	(init_extra_frame_info): Use TARGET_READ_FP.
+	(frame_chain): Include thread support.
+	If the caller's pc is zero, we lose and return, just like stack
+	bottom.
+	Disable warning about being unable to find unwind info.
+	(hppa_push_arguments): Rewrite.
+	(hppa_value_returned_from_stack): New function. Handles returning
+ 	a value larger than 64 bits, stored on the stack.
+	(find_stub_with_shl_get): New function. To look up symbols in shlibs.
+	(cover_find_stub_with_shl_get): New function. Cover routine for 
+	find_stub_with_shl_get to pass to catch_errors.
+	(hppa_fix_call_dummy): Comment out old stub mechanism.
+	Rewrite using dyncall.
+	(target_read_fp): New function.
+	(pa_do_registers_info): Floating point registers start at FP4.
+	(pa_print_registers): Use FP4_REGNUM instead of 72.
+	(skip_trampoline_code): Do machine instruction matching for PA2.0.
+	(setup_d_pid_in_inferior): New function. Exception handling support.
+	(initialize_hp_cxx_exception_support): Ditto.
+	(child_enable_exception_callback): Ditto.
+	(child_get_current_exception_event): Ditto.
+
+	* hpux-thread.c (hpux_thread_ops): Add new target vector fields.
+
+	* infcmd.c: Include objfiles.h.
+	(attach_command): New local variable, exec_file, add code to
+ 	determine exec_file from pid if exec_file is not already known,
+	call new target operation, target_post_attach -- a no-op unless
+	on HPUXHPPA.
+	(detach_command): After detaching, do a SOLIB_RESTART.
+	(objfiles.h): Fix typo on include line.
+	(run_command): Only call SOLIB_RESTART if it's defined.
+	(detach_command): Ditto.
+	(run_command): If program has already been started, and decide
+	to restart it, the kill the target, flush the caches, 
+	call init_wait_for_inferior. Also purge old solib objfiles.
+	(run_stack_dummy): Add calls to
+ 	disable_watchpoints_before_interactive_call_start and
+ 	enable_watchpoints_after_interactive_call_stops.
+	(finish_command): Alter code handling the evaluation and printing
+ 	of the target function's return value.
+	(attach_command): When given a pid, but no exec file, try to
+ 	determine the exec file from the process. If the process does not
+ 	record a full path name, try to qualify the filename against the
+ 	source path.
+	(_initialize_infcmd): Add some verbiage about how to use the
+ 	attach command.
+	(do_registers_info): Changed calls to val_print
+	made the symfile.h include preceed the 
+	objfiles.h include. The other ordering caused a 
+	compile problem (incompletely defined types).
+
+	* inftarg.c (child_post_attach): Fix decl, make static.
+	(proc_wait): Make globally visible.
+	(child_insert_fork_catchpoint, etc): Fix return type.
+	(child_detach_from_process): Declare.
+	(child_attach_to_process): Declare.
+	(child_stop): Make static to match decl.
+	(ptrace_him): Change prototype back to return int. 
+	(ptrace_me): Remove debug output, pass NULL to fork_inferior if
+ 	not HPUX.
+	(proc_wait): function prototype and definition are enclosed by
+ 	proc_wait ifndef
+	(child_attach_to_process): New function, does most of the work
+ 	that child_attach used to do and some additional work to determine
+ 	whether gdb is already attached to the target how to react.
+	(child_attach): Altered. It's now a wrapper for
+ 	child_attach_to_process.
+	(child_require_attach): New function, called if should attach even
+ 	when gdb is already attached to target.
+	(child_detach_from_process): New function, does most of the work
+ 	that child_detach used to do and some additional work to determine
+ 	whether gdb is currently attached to the target.
+	(child_detach): Altered. It's now a wrapper for
+ 	child_detach_from_process.
+	(child_require_detach): New function, called if should try to
+ 	detach even when gdb is not attached to target.
+	(ptrace_him): Calls a new function,
+ 	target_acknowledge_forked_child.  Currently,
+ 	target_acknowledge_forked_child, is only defined to do something
+ 	for HPUX.
+	(child_create_inferior): Changed call to fork_inferior.
+	(child_ops): Add to_require_attach and to_require_detach fields
+ 	to the child_ops target ops vector.
+	Some hacks for ttrace work:
+	(child_wait): Additional local variables, additional code in
+	while loop to check for process exited, process forked, 
+	process vforked, process execd.
+	(child_thread_alive): John B. seems to think that the kill 
+	call is inapproapriate for HPUX.
+	(child_attach_to_process): Using strtol rather than atoi.
+	no longer check for case where there is no known exec file.
+	(child_post_attach): New function, a default, a no-op.
+ 	(child_insert_fork_catchpoint): New function, a default, a no-op.
+	(child_remove_fork_catchpoint): New function, a default, a no-op.
+	(child_insert_vfork_catchpoint): New function, a default, a no-op.
+	(child_remove_vfork_catchpoint): New function, a default, a no-op.
+	(child_can_follow_vfork_prior_to_exec ):new function, a default, 
+ 	a no-op.
+	(child_insert_exec_catchpoint): New function, a default, a no-op.
+	(child_remove_exec_catchpoint): New function, a default, a no-op.
+	(child_has_execd): New function, a default, returns 0.
+	(child_reported_exec_events_per_exec_call): New function, a 
+ 	default, returns 1.
+	(child_has_exited): New function, a default.
+	(child_core_file_to_sym_file): New function, a default, returns NULL.
+	(child_ops): Initialize new target vector fields.
+
+	* jv-lang.h: (Java_val_print): Add embedded_offset param to func
+ 	decl.
+
+	* jv-valprint.c: Changing calls to val_print to accomodate new param.
+	(java_value_print): Add embedded_offset param to val_print call
+	(java_print_value_fields): Add embedded_offset param to val_print
+	call.
+	(java_val_print): Add embedded_offset param. alter call to 
+	c_val_print to accomodate embedded_offset param.
+
+	* language.c (lang_bool_type): Return builtin_type_bool in c++
+	case.
+	(unk_lang_val_print): Add embedded_offset param to 
+	prototype decl and definition.
+
+	* language.h (LA_VAL_PRINT macro, la_val_print function decl):
+ 	altered to accomodate the new parameter to the various print
+ 	functions.
+	
+	* m2-lang.h (m2_val_print): Add a parameter to the function decl.
+
+	* m2-valprint.c (m2_val_print): Add a parameter.
+	This parameter is currently only used when evaluating C++
+ 	expressions. So, it is always 0 in this file.
+
+	* m3-nat.c (m3_create_inferior): Add param to fork_inferior call
+	(m3_pid_to_exec_file): New function
+	(m3_ops): Add new target vector fields.
+
+	* mac-nat.c (init_child_ops): Add new target vector fields.
+
+	* mips-tdep.c: Chnages to accomodate additional parameter
+	to val_print.
+	(mips_print_register): Alter calls to val_print
+
+	* monitor.c (monitor_write): Change stderr to gdb_stderr.
+	(monitor_remove_breakpoint): Ditto.
+	(init_base_monitor_ops): Add new target vector fields.
+
+	* ppc-bdm.c (init_bdm_ppc_ops): Add new target vector fields.
+	
+	* printcmd.c (do_examine): When saving a value_ptr, remove it from
+ 	the list of value_ptr's to be freed automatically; when discarding
+ 	a previously saved value_ptr, free it.
+	(print_formatted): Update comments; add new comments.
+	(printf_command, print_insn): Purecov comments.
+	(_initialize_printcmd): Add assign as a command if dbx_commands is
+ 	set; create va as an alias for disassemble if xdb_commands is set.
+	(address_info): New cases LOC_INDIRECT and
+ 	LOC_THREAD_LOCAL_STATIC.
+	(display_command): If tui_version and exp starts with a '$', then
+ 	don't display it unless tui_vSetLayoutTo fails.
+	(disassemble_command): Add tuiDo calls.
+	(print_scalar_formatted): For integers that are long long, check
+ 	the print format and print out in binary octal, decimal, or
+ 	hex. Call the new print_*_chars functions in valprint.c
+	(print_frame_args): Altered calls to val_print, to reflect
+ 	additional parameter to val_print (case LOC_BASEREG_ARG).
+
+	* procfs.c: (Procfs_init_inferior): Return value is now a void.
+	(procfs_ops): Add new target vector fields.
+	(procfs_create_inferior): Fix call to fork_inferior -- need another
+	parameter. 
+
+	* remote-adapt.c (adapt_open): Change stderr to gdb_stderr.
+	(adpat_insert_breakpoint): Ditto.
+	(init_adapt_ops): Add new target vector fields.
+
+	* remote-array.c (array_wait): Change fflush to gdb_flush and
+ 	stdout to gdb_stdout.
+	(init_array_ops): Add new target vector fields.
+
+	* remote-bug.c (bug_load): Change fflush to gdb_flush; stdout to
+ 	gdb_stdout.
+	(bug_wait): Change stderr to gdb_stderr.
+	(bug_insert_breakpoint): Ditto.
+	(init_bug_ops): Add new target vector fields.
+
+	* remote-e7000.c
+	(init_e7000_ops): Add new target vector fields.
+	* remote-eb.c (init_eb_ops): Ditto.
+	* remote-es.c (init_es1800_ops): Ditto.
+	(init_es1800_child_ops): Ditto.
+	* remote-es.c (init_es1800_ops): Ditto.
+	(init_es1800_child_ops): Ditto.
+	* remote-hms.c (init_hms_ops):  Ditto.
+	* remote-hms.c (init_hms_ops): Ditto.
+	* remote-nindy.c (init_nindy_ops): Ditto.
+	* remote-nrom.c	(init_nrom_ops): Ditto.
+	* remote-os9k.c (init_rombug_ops): Ditto.
+	* remote-rdp.c (init_remote_rdp_ops): Ditto.
+	* remote-sds.c (init_sds_ops): Ditto.
+	* remote-sim.c (init_gdbsim_ops): Ditto.
+	* remote-st.c (init_st2000_ops): Ditto.
+	* remote-udi.c (init_udi_ops): Ditto.
+	* remote-vx.c (init_vx_ops): Ditto.
+	(init_vx_run_ops): Ditto.
+	* remote-vx.c: (Init_vx_ops): Ditto.
+	(init_vx_run_ops): Ditto.
+
+	* remote-mips.c (mips_getstring): Change stderr to gdb_stderr.
+	(pmon_insert_breakpoint): Ditto.
+	(pmon_remove_breakpoint): Ditto.
+	(check_lsi_error): Ditto.
+	(common_breakpoint): Ditto.
+	(pmon_makeb64): Ditto.
+
+	* remote-mips.c (mips_xfer_memory): Change fflush to gdb_flush;
+	change stdout to gdb_stdout.
+
+	* remote-mm.c (mm_open): Change stderr to gdb_stderr.
+	(init_mm_ops): Add new target vector fields.
+	(mm_load): Fixed params in commented out call to symbol_file_add.
+
+	* remote-nindy.c (instream): Change decl to FILE.
+
+	* remote-udi.c (udi_load): Fixed params in call to symbol_file_add.
+
+	* remote-vx.c (vx_add_symbols): Fixed params in call to
+ 	symbol_file_add.
+
+	* remote.c (init_remote_ops): Cosmetic change to match expected
+	test output.
+
+	* rs6000-nat.c (add_vmap): Add params to call to allocate_objfile.
+
+	* scm-lang.h:  Add parameter to scm_val_print function decl.
+
+	* scm-valprint.c (scm_scmval_print): Cast svalue to (int); new
+ 	parameter.  This parameter is currently only used when evaluating
+ 	C++ expressions. So, it is always 0 in this file.
+	(c_val_print): Fixed prototype decl; it needed an embedded_offset
+ 	param.
+
+	* sol-thread.c (sol_core_ops): Add new target vector fields.
+	(sol_thread_ops): Ditto.
+	
+	* somsolib.c (DLD_FLAGS_MAPPRIVATE): New macro. 
+	Define bit of __dld_flags in HP-UX a.out files.
+	(DLD_FLAGS_HOOKVALID): Ditto.
+	(DLD_FLAGS_LISTVALID): Ditto.
+	(DLD_FLAGS_BOR_ENABLE): Ditto.
+	(som_solib_total_st_size): Cumulative size in bytes of the 
+	symbol tables of all shared objects on the so_list_head list.
+	(som_solib_st_size_threshhold_exceeded): Threshold for adding symbols
+	for shlibs.
+	(som_solib_sizeof_symbol_table): New function. Computes size of 
+	symbol table for a shlib.
+	(som_solib_load_symbols): New function. Load symbols from shlib.
+	(som_solib_add): Detect if __dld_list is not valid. 
+	Record main program's symbol table size.
+	Load symbols if called from command line.
+	Keep threshold into account when loading shlib symbols.
+	(som_solib_create_inferior_hook): Use dld_flags macros.
+	(som_sharedlibrary_info_command): Let user know if symbols were 
+	not loaded.
+	(som_solib_restart): Discard all the shlibs descriptors.
+	(_initialize_som_solib): Chenge help message for auto-solib-add
+	command.
+	Set threshold for symbol table to 50 megabytes.
+	(_initialize_som_solib): Add call to som_solib_restart.
+	(som_solib_restart): New function
+	(som_solib_in_dynamic_linker): New function
+	(som_solib_desire_dynamic_linker_symbols): New function
+	(som_solib_unloaded_library_pathname): New function
+	(som_solib_loaded_library_pathname): New function
+	(som_solib_library_pathname): New function
+	(som_solib_have_unload_event): New function
+	(som_solib_have_load_event): New function
+	(som_solib_create_catch_unload_hook): New function
+	(som_solib_create_catch_load_hook): New function
+	(som_solib_create_inferior_hook): Rewritten
+	dld_cache: New struct
+	addr_and_unwind_t: New struct
+	(find_unwind_entry) add prototype
+	Include assert.h, remove references to ASSERT macro,
+	add include of fcntl.h so that O_RDONLY is defined.
+	(som_solib_create_inferior_hook): Introduce new local
+ 	msymbol2 and change some msymbol's to msymbol2's -- was clobbering
+ 	msymbol, passing a NULL to lookup_minimal_symbol_solib_trampoline,
+	and ultimately core dumping with a SEGV.
+	(som_solib_mapped_entry): Additional comments for text_addr, 
+	text_link_addr, text_end, and tsd_start_addr fields. Commenting
+	out 2 tsd fields, __data_start and __data_end. 
+	(som_solib_add_solib_objfile): Add params to calls to symbol_file_add.
+	Add some code for distinguishing between a shared library and other 
+	objfiles. This appears to be a prelude to thread local storage.	
+	(som_solib_load_symbols): Changes to printf statement 
+	enclosed by SOLIB_DEBUG ifdef.
+	(som_solib_add): Change comment to correctly specify path
+	to end.o -- /opt/langtools/lib/end.o. changes to printf statement
+ 	enclosed by SOLIB_DEBUG ifdef.
+	Removed several SOLIB_DEBUG ifdefs and the associated printfs.
+	Add code to find the start address for the object file's thread 
+	local storage
+	(som_solib_create_inferior_hook): Fix warning messages use correct
+	path to end.o -- /opt/langtools/lib/end.o. Change control flow. 
+	No longer user early returns from function is cases of error.
+	(reset_inferior_pid): New function
+	(som_solib_remove_inferior_hook): New function
+	(so_lib_thread_start_addr): New function. used for tsd.
+	(struct som_solib_mapped_entry): Add new field tsd_start_addr.
+	(struct so_list): Add new field solib_addr.
+	(som_solib_add_solib_objfile): New function. 
+	(som_solib_load_symbols): Rewritten.
+	(som_solib_add): Make sure we don't load the symbols in if the 
+	threshold was exceeded.
+	(som_solib_get_solib_by_pc): New function. Return the address of
+ 	handle of the shared library.
+	(som_solib_restart): Disable breakpoints at restart.
+
+	* sparcl-tdep.c (init_sparclite_ops): Add new target vector fields.
+
+	* target.c (cleanup_target): Changed casting of default functions
+ 	for to_has_forked, to_has_vforked, to_pid_to_exec_file to get rid
+ 	of warnings.  Fixed PARAMS for to_has_syscall_event.  Fixed the
+ 	return type on a few of the default function values.
+	(cleanup_target): Changes in the de_fault macro, both to
+	accomodate the new target_ops vector fields and to use
+	more accurate default functions.
+	(debug_to_open): Change stderr to gdb_stderr.
+	(debug_to_close): Ditto.
+	(debug_to_attach): Ditto.
+	(debug_to_post_attach): Ditto.
+	(debug_to_require_attach): Ditto.
+	(debug_to_detach): Ditto.
+	(debug_to_require_detach): Ditto.
+	(debug_to_resume): Ditto.
+	(debug_to_wait): Ditto.
+	(debug_to_post_wait): Ditto.
+	(debug_to_fetch_registers): Ditto.
+	(debug_to_store_registers): Ditto.
+	(debug_to_prepare_to_store): Ditto.
+	(debug_to_xfer_memory): Ditto.
+	(debug_to_files_info): Ditto.
+	(debug_to_insert_breakpoint): Ditto.
+	(debug_to_remove_breakpoint): Ditto.
+	(debug_to_terminal_init): Ditto.
+	(debug_to_terminal_inferior): Ditto.
+	(debug_to_terminal_ours_for_output): Ditto.
+	(debug_to_terminal_ours): Ditto.
+	(debug_to_terminal_info): Ditto.
+	(debug_to_kill): Ditto.
+	(debug_to_load): Ditto.
+	(debug_to_lookup_symbol): Ditto.
+	(debug_to_create_inferior): Ditto.
+	(debug_to_post_startup_inferior): Ditto.
+	(debug_to_acknowledge_created_inferior): Ditto.
+	(debug_to_clone_and_follow_inferior): Ditto.
+	(debug_to_post_follow_inferior_by_clone): Ditto.
+	(debug_to_insert_fork_catchpoint): Ditto.
+	(debug_to_remove_fork_catchpoint): Ditto.
+	(debug_to_insert_vfork_catchpoint): Ditto.
+	(debug_to_remove_vfork_catchpoint): Ditto.
+	(debug_to_has_forked): Ditto.
+	(debug_to_has_vforked): Ditto.
+	(debug_to_can_follow_vfork_prior_to_exec): Ditto.
+	(debug_to_post_follow_vfork): Ditto.
+	(debug_to_insert_exec_catchpoint): Ditto.
+	(debug_to_remove_exec_catchpoint): Ditto.
+	(debug_to_has_execd): Ditto.
+	(debug_to_reported_exec_events_per_exec_call): Ditto.
+	(debug_to_has_syscall_event): Ditto.
+	(debug_to_has_exited): Ditto.
+	(debug_to_mourn_inferior): Ditto.
+	(debug_to_can_run): Ditto.
+	(debug_to_notice_signals): Ditto.
+	(debug_to_thread_alive): Ditto.
+	(debug_to_stop): Ditto.
+	(debug_to_enable_exception_callback): Ditto.
+	(debug_to_get_current_exception_event): Ditto.
+	(debug_to_pid_to_exec_file): Ditto.
+	(debug_to_core_file_to_sym_file): Ditto.
+	(default_clone_and_follow_inferior): New function prototype
+ 	decl and function definition.
+	(dummy_target): Add new target_ops vector fields and their
+ 	initializations.  More target_ops vector changes for HPUX new
+ 	fields.
+	(de_fault): Add new HPUX specific target_ops operations to the
+	de_fault macro
+	(INHERIT): Add new HPUX specific target_ops operations.
+	(debug_to_post_wait): New function.
+	(debug_to_post_startup_inferior): Ditto.
+	(debug_to_acknowledge_created_inferior): Ditto.
+	(debug_to_clone_and_follow_inferior): Ditto.
+	(debug_to_post_follow_inferior_by_clone): Ditto.
+	(debug_to_create_catch_fork_hook): Ditto.
+	(debug_to_create_catch_vfork_hook): Ditto.
+	(debug_to_has_forked): Ditto.
+	(debug_to_has_vforked): Ditto.
+	(debug_to_post_follow_vfork): Ditto.
+	(setup_target_debug): Initialize new target_ops vector fields.
+	(nosupport_runtime): New function, used in cleanup_target
+	(update_current_target): Add new new target_ops vector fields to
+	the INHERIT macro definition.
+	(generic_mourn_inferior): The call to breakpoint_init_inferior now
+ 	takes a parameter.
+	(normal_pid_to_str): Add a \0 to the end of buf.
+	(debug_to_has_syscall_event): New function.
+	(debug_to_enable_exception_callback): New function.
+	(debug_to_get_current_exception_event): New function.
+	(setup_target_debug): Initialize the 3 new target_ops vector fields
+	(struct signals): Fix message associated with SIGRETRACT.
+	(return_one): New function, used by the de_fault macro
+	(debug_to_post_attach): New function.
+	(debug_to_wait): Add new cases TARGET_WAITKIND_FORKED,
+	TARGET_WAITKIND_VFORKED, TARGET_WAITKIND_EXECD.
+	(debug_to_insert_fork_catchpoint): New function.
+	(debug_to_remove_fork_catchpoint): Ditto.
+	(debug_to_insert_vfork_catchpoint): Ditto.
+	(debug_to_remove_vfork_catchpoint): Ditto.
+	(debug_to_can_follow_vfork_prior_to_exec): Ditto.
+	(debug_to_insert_exec_catchpoint): Ditto.
+	(debug_to_remove_exec_catchpoint): Ditto.
+	(debug_to_core_file_to_sym_file): Ditto.
+	(setup_target_debug): Give new fields in current_target target_ops
+ 	vector values.
+
+	* target.h: Include symtab.h.
+	(target_waitkind): New enumerated values
+	TARGET_WAITKIND_SYSCALL_ENTRY, TARGET_WAITKIND_SYSCALL_RETURN,
+	TARGET_WAITKIND_FORKED, TARGET_WAITKIND_VFORKED, 
+	TARGET_WAITKIND_EXECD.
+	(target_waitstatus): Add a syscall_id field to structure.
+	(child_has_syscall_event): New decl.
+	(child_thread_alive): New decl.
+	(target_ops): Add 3 new fields: To_has_syscall_event,
+	to_enable_exception_callback, to_get_current_exception_event 
+	(target_enable_exception_callback): New macro.
+	(target_has_syscall_event): New macro. 
+	(target_get_current_exception_event): New macro.
+	(TARGET_DISABLE_HW_WATCHPOINTS): New macro.
+	(TARGET_ENABLE_HW_WATCHPOINTS): New macro.
+	(PC_REQUIRES_RUN_BEFORE_USE): New macro.
+	(target_tid_to_str): New macro.
+	(target_waitstatus): Additional fields in struct to keep track
+	of child pid and pathname to execd file.
+	(target_ops): Add in the new target_ops function pointer fields.
+	New macros to go along with new target_ops fields.
+	In target_waitstatus.value, change name of child_pid field to
+	related_pid.
+	(target_pid_or_tid_to_str): Define default macro.
+	Add missing #endif after PC_REQUIRES_RUN_BEFORE_USE definition
+	(ENSURE_VFORKING_PARENT_REMAINS_STOPPED): Define default macro.
+	(RESUME_EXECD_VFORKING_CHILD_TO_GET_PARENT_VFORK): Define default
+	macro.
+	There are new function decls for to_require_attach
+	and to_require_detach. There are also new macros, 
+	target_require_attach and target_require_detach. There are
+	also new function decls for find_default_require_detach
+	and find_default_require_attach.
+	(target_ops): New fields to_post_wait, to_post_startup_inferior
+ 	to_acknowledge_created_inferior, to_clone_and_follow_inferior,
+ 	to_post_follow_inferior_by_clone, to_create_catch_fork_hook,
+ 	to_create_catch_vfork_hook, to_has_forked, to_has_vforked,
+ 	to_post_follow_vfork, to_pid_to_exec_file.
+	New function definitions child_pid_to_exec_file, child_post_wait,
+ 	child_post_startup_inferior, child_acknowledge_created_inferior,
+ 	child_clone_and_follow_inferior,
+ 	child_post_follow_inferior_by_clone, child_create_catch_fork_hook,
+ 	child_create_catch_vfork_hook, child_has_forked,
+ 	child_has_vforked, child_acknowledge_created_inferior,
+ 	child_post_follow_vfork.
+	New macros target_post_startup_inferior,
+ 	target_acknowledge_created_inferior,
+ 	target_clone_and_follow_inferior,
+ 	target_post_follow_inferior_by_clone,
+ 	target_create_catch_fork_hook, target_create_catch_vfork_hook,
+ 	target_pid_to_exec_file.
+	(find_default_clone_and_follow_inferior): New function prototype.
+
+
+	* v850ice.c (init_850ice_ops): Init new target vector fields.
+
+	* valprint.c (print_binary_chars): Print out long long as
+	a binary number.
+	(print_octal_chars): Print out long long as an octal number
+	(print_decimal_chars): Print out long long as a decimal number
+	(strcat_longest): Define it.
+	* valprint.c: Hp merge, 4/15/98 snapshot
+	Add parameter to val_print. This is used for
+	evaluating C++ expressions. 
+	
+	* value.h (VALUE_POINTED_TO_OFFSET): New macro.
+	Add field pointed_to_offset to value structure.
+	Add prototypes for new functions in valops.c.
+	(write_register_pid): Change prototype to match
+ 	function.
+	(val_print function decl): Additional parameter.
+  	(VALUE_EMBEDDED_OFFSET): New macro.
+ 	(find_rt_vbase_offset): New function decl -- for C++ support.
+
+Wed Dec 23 15:03:42 1998  Per Bothner  <bothner@cygnus.com>
+
+	* Makefile.in (READLINE_CFLAGS):  Search $(READLINE_SRC)/.. rather
+	than $(READLINE_SRC) so #include <readline/readline.h> will work.
+	* top.c:  #include <readline/history.h> instead of "history.h".
+	* tracepoint.c:  Likewise.
+	* mac-xdep.c:  Likewise.
+
+Wed Dec 23 12:32:00 1998  Andrew Cagney  <cagney@chook.cygnus.com>
+
+	* defs.h (TARGET_FLOAT_FORMAT, TARGET_DOUBLE_FORMAT): Define using
+ 	TARGET_BYTE_ORDER and not target_byte_order.
+
+Tue Dec 22 10:51:33 1998  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
+
+	* config/i386/cygwin.mh (TERMCAP): define.
+ 	(from Chris Faylor, cgf@cygnus.com)
+
+	* top.c: specify directory name for including readline.h
+
+	* tracepoint.c: ditto.
+
+	* utils.c: ditto.
+
+Mon Dec 21 13:30:34 1998  Mark Alexander  <marka@cygnus.com>
+
+	* value.c (value_virtual_fn_field): Handle the situation where
+	vtbl is a pointer to a structure instead of a pointer to an array.
+
+Mon Dec 21 10:38:11 1998  Andrew Cagney  <cagney@chook>
+
+	* mips-tdep.c: (MIPS_DEFAULT_FPU_TYPE): Default to
+ 	MIPS_FPU_DOUBLE.
+
+1998-12-17  J.T. Conklin  <jtc@redbacknetworks.com>
+
+	* blockframe.c (get_frame_saved_regs): If the saved_regs_addr ptr
+	is null, ensure that saved registers are copied from the local
+	variable that was used to obtain them.
+
+Sat Dec 19 09:55:09 1998  Stu Grossman  <grossman@babylon-5.cygnus.com>
+
+	* mips-tdep.c (mips32_heuristic_proc_desc):  Clear temp_saved_regs
+	on restart.  Fixes problem with backtracing through functions that
+	use virtual frame pointers.
+
+Fri Dec 18 14:23:34 1998  Andrew Cagney  <cagney@chook>
+
+	* mips-tdep.c (mips_push_arguments): Don't left-shift small
+ 	structs being passed in a register when an O64 target.
+
+	* config/mips/tm-mips.h (enum mips_fpu_type, mips_fpu): Move to
+ 	mips-tdep.c.
+
+	* mips-tdep.c (mips_fpu_string): Delete variable.
+	(mips_fpu_type_auto): New variable.
+	(mips_fpu_type): Rename mips_fpu.
+	(_initialize_mips_tdep): Delete initialization of mips_fpu et.al.
+  	Rewrite ``set mipsfpu'' command set.
+	(set_mipsfpu_command, show_mipsfpu_command,
+ 	set_mipsfpu_single_command, set_mipsfpu_double_command,
+ 	set_mipsfpu_none_command, set_mipsfpu_auto_command): New
+ 	functions, handle commands.
+	(mips_push_arguments, mips_push_dummy_frame, mips_pop_frame,
+ 	mips_extract_return_value): Update.
+	
+Thu Dec 17 02:15:40 1998  Andrew Cagney  <cagney@chook.cygnus.com>
+
+	* configure.tgt (gdb_target): Identify mips64*vr4100*-*-elf* as
+ 	vr4100.
+	
+Thu Dec 17 01:34:36 1998  Andrew Cagney  <cagney@chook>
+
+	* gdbtypes.c (build_gdbtypes): New function.
+	(_initialize_gdbtypes): Call.
+
+Wed Dec 16 11:47:00 1998  Andrew Cagney  <cagney@chook>
+
+	* gdbarch.c (show_architecture): Use TARGET_ARCHITECTURE.
+	* gdbarch.h, gdbarch.c: Fix typo's. Use struct's in preference to
+ 	types.
+	* gdbarch.h, gdbarch.c (gdbarch_debug): Add ``set archdebug'' to
+ 	command set.
+
+Tue Dec 15 23:46:40 1998  Andrew Cagney  <cagney@chook>
+
+	* config/mips/tm-*.h: (TARGET_BYTE_ORDER_DEFAULT,
+ 	TARGET_BYTE_ORDER_SELECTABLE_P): Replace TARGET_BYTE_ORDER and
+ 	TARGET_BYTE_ORDER_SELECTABLE.
+	
+1998-12-14  Anthony Thompson   (athompso@cambridge.arm.com)
+
+	* remote-rdp.c (rdp_init): Don't discard first character on reset.
+	(translate_open_mode): Define table.
+	(exec_swi): Handle SWI_Clock.  SWI_Open now handles stdin/stdout.
+	SWI_Write returns number of bytes not written.  SWI_Read does the
+	same.  SWI_Seek should return success/failure flag.  Fix SWI_Flen.
+
+1998-12-14  J.T. Conklin  <jtc@redbacknetworks.com>
+
+	* config/i386/nbsd.mh, config/m68k/nbsd.mh, config/ns32k/nbsd.mh
+	(XDEPFILES): Add ser-tcp.o.
+
+Mon Dec 14 14:46:13 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* monitor.c (monitor_expect, monitor_printf_noecho,
+ 	monitor_printf): Always compile EXTRA_RDEBUG code.
+	(RDEBUG): Ditto.
+
+	From Michael Meissner <meissner@cygnus.com>:
+	* ppcbug-rom.c (init_ppc_cmds): Cleanup formatting.
+
+1998-12-08  Michael Meissner  <meissner@cygnus.com>
+
+	* monitor.c (monitor_printable_string): New function to convert a
+	string into a printable representation.
+	(monitor_error): Call error after converting string into printable
+	format.
+	(monitor_printf{,_noecho}): If EXTRA_RDEBUG is defined, convert
+	string into printable form before printing.
+	(monitor_expect): Ditto.
+	(monitor_read_memory{,_single}): Call monitor_error, not error.
+	(monitor_read_memory): Return immediately if length is 0.
+
+	* ppcbug-rom.c (init_ppc_cmds): Fill in dump_registers field,
+ 	which is now required.
+
+Mon Dec 14 11:01:39 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* gdbarch.h, gdbarch.c: Consolidate the semi-dynamic target system
+ 	dependant GDB parameters.
+	(set_gdbarch_from_file): Combine set_architecture_from_file and
+ 	set_byte_order_from_file.
+	* top.c, defs.h, printcmd.c: Delete them from here.
+	* Makefile.in: Add gdbarch.[ch].
+	* exec.c (exec_file_command): Call set_gdbarch_from_file.
+
+Sun Dec 13 09:52:51 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* defs.h (TARGET_PRINT_INSN_INFO, TARGET_PRINT_INSN): Define.
+	(TARGET_ARCHITECTURE, TARGET_ARCHITECTURE_AUTO): Define.
+	(TARGET_BYTE_ORDER_AUTO): Define.
+	(TARGET_BYTE_ORDER_SELECTABLE_P): Provide default. Replaces
+ 	TARGET_BYTE_ORDER_SELECTABLE. Handle compat issues.
+	(BITS_BIG_ENDIAN): Simplify.
+	(TARGET_FLOAT_FORMAT): Ditto.
+	(TARGET_DOUBLE_FORMAT): 
+
+	* remote-e7000.c, sh-tdep.c, printcmd.c, remote-sim.c,
+ 	remote-rdi.c, sparc-tdep.c: Update.
+	
+	* config/powerpc/tm-ppcle-eabi.h, config/rs6000/tm-rs6000.h,
+ 	config/powerpc/tm-ppc-eabi.h, config/mn10300/tm-mn10300.h:
+ 	Convert.
+
+Sat Dec 12 09:28:13 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* frame.h (struct frame_info): Add CORE_ADDR *saved_regs and
+ 	struct frame_extra_info *extra_info.
+	(frame_obstack_alloc, frame_saved_regs_zalloc): Prototype.
+	(SIZEOF_FRAME_SAVED_REGS): Provide default.
+	(FRAME_INIT_SAVED_REGS): Provide default.
+	(struct frame_saved_regs): Deprecate.
+	(EXTRA_FRAME_INFO): Deprecate.
+	
+	* blockframe.c (frame_obstack_alloc, frame_saved_regs_zalloc): New
+ 	function.
+	(generic_get_saved_register): Use FRAME_INIT_SAVED_REGS and
+ 	frame->saved_regs.
+	(frame_cache_obstack): Make static.
+	(get_frame_saved_regs): Deprecate. Copy the saved regs into the
+ 	frame buffer.
+
+	* stack.c (frame_info): Rewrite using frame->saved_regs and
+ 	FRAME_INIT_SAVED_REGS.
+	* findvar.c (find_saved_register): Ditto.
+
+	* config/mn10300/tm-mn10300.h (EXTRA_FRAME_INFO): Delete.
+	(FRAME_FIND_SAVED_REGS): Replace with FRAME_INIT_SAVED_REGS. No-op.
+	* mn10300-tdep.c: Update.
+ 	(analyze_dummy_frame): New function.
+	(struct frame_extra_info): Define.
+	(mn10300_init_extra_frame_info): Update.
+	
+	* config/rs6000/tm-rs6000.h: (EXTRA_FRAME_INFO): Delete.
+ 	(FRAME_FIND_SAVED_REGS): Replace with FRAME_INIT_SAVED_REGS.
+	(FRAME_ARGS_ADDRESS): Replace with function.
+
+	* rs6000-tdep.c (frame_get_saved_regs): Rename from
+ 	frame_get_cache_fsr.
+	(rs6000_init_extra_frame_info): New function.
+	(rs6000_frame_init_saved_regs): Call frame_get_saved_regs.
+	(FUNCTION_START_OFFSET): Delete references, was ZERO.
+	(rs6000_frame_args_address): New function.
+	(frame_initial_stack_address): Update
+	
+	* config/mips/tm-mips.h (EXTRA_FRAME_INFO): Remove saved_regs.
+	(FRAME_INIT_SAVED_REGS): Rename FRAME_FIND_SAVED_REGS, update.
+	* mips-tdep.c (mips_find_saved_regs, read_next_frame_reg,
+ 	init_extra_frame_info, mips_pop_frame): Update.
+	* config/alpha/tm-alpha.h (FRAME_INIT_SAVED_REGS,
+ 	EXTRA_FRAME_INFO), alpha-tdep.c (alpha_find_saved_regs,
+ 	alpha_pop_frame, init_extra_frame_info): Ditto.
+	
+	* i960-tdep.c, m88k-tdep.c, h8300-tdep.c: Update.
+	* config/sparc/tm-sparc.h, config/a29k/tm-a29k.h: Define
+ 	FRAME_INIT_SAVED_REGS as no-op.
+
+	* z8k-tdep.c (z8k_init_frame_saved_regs): Rename
+ 	get_frame_saved_regs.
+	(examine_frame, z8k_skip_prologue): Update.
+	* config/z8k/tm-z8k.h (FRAME_INIT_SAVED_REGS): Define.
+
+1998-12-11  Fernando Nasser  <fnasser@totem.to.cygnus.com>
+
+	From J.T. Conklin  <jtc@redbacknetworks.com>:
+	* i386-stub.c (handle_exception): Add support for 'P' command.
+	(NUMREGS): New macro.
+
+Fri Dec 11 09:07:05 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* i386b-nat.c: Include "expression.h".
+
+	* symtab.h: Don't include "gnu-regex.h".
+	
+	* solib.c (solib_add_common_symbols): Cast parameters passed to
+ 	make_cleanup to use the new make_cleanup_func typedef.
+
+	* inftarg.c: Include "wait.h" after, rather than before, <wait.h>.
+  	"wait.h" was defining all WIF* macro's instead of filling in those
+ 	that <wait.h> missed.
+
+Fri Dec 11 09:52:04 1998  Andrew Cagney  <cagney@chook>
+
+	* mipsm3-nat.c, hppah-nat.c, infptrace.c, i386gnu-nat.c,
+ 	hppab-nat.c, core-aout.c, arm-xdep.c, alpha-nat.c, altos-xdep.c,
+ 	pyr-xdep.c, remote-st.c, remote-os9k.c, tahoe-tdep.c, pyr-tdep.c,
+ 	vax-tdep.c: Replace reg_name with REGISTER_NAME.
+
+Thu Dec 10 15:19:40 1998  David Taylor  <taylor@texas.cygnus.com>
+
+	The following changes were made by Jim Blandy <jimb@cygnus.com>,
+ 	Edith Epstein <eepstein@cygnus.com>, Elena Zannoni
+ 	<ezannoni@cygnus.com> Stan Shebs <shebs@cygnus.com>, and David
+ 	Taylor <taylor@cygnus.com>, as part of the project to merge in
+ 	changes originally made by HP; HP did not create ChangeLog
+ 	entries.
+	
+	* annotate.c (annotate_catchpoint): New function.
+
+	* annotate.h (annotate_catchpoint): declare it; add new includes
+ 	(symtab.h and gdbtypes.h).
+
+	* buildsym.h: add external var processing_hp_compilation.
+
+	* coff-solib.h: 
+	(SOLIB_REMOVE_INFERIOR_HOOK): new macro. defined to 0.
+	functionality not implemented for coff.
+	(SOLIB_CREATE_CATCH_LOAD_HOOK): New macro; generate error msg for coff.
+	(SOLIB_CREATE_CATCH_UNLOAD_HOOK): ditto.
+	(SOLIB_HAVE_LOAD_EVENT): ditto.
+	(SOLIB_LOADED_LIBRARY_PATHNAME): ditto.
+	(SOLIB_HAVE_UNLOAD_EVENT): ditto.
+	(SOLIB_UNLOADED_LIBRARY_PATHNAME): ditto.
+	(SOLIB_IN_DYNAMIC_LINKER): ditto.
+	(SOLIB_RESTART): ditto.
+
+	* complaints.h: add ifdef...endif pair at beginning and end of file.
+
+	* dstread.c (dst_symfile_read): the parameter to fileno
+	must be of type FILE *. So cast abfd->iostream in the 
+	call to fileno must be cast as a FILE *, not a GDB_FILE *.
+	This will work because abfd->iostream is declared and 
+	given a value in bdf and bfd will continue to use FILE 
+	rather than GDB_FILE.
+
+	* dwarf2read.c (dwarf_bool_name): change parameter from bool
+	to mybool.  sigh.
+
+	* expression.h: include symtab.h
+	
+	* frame.h (print_only_stack_frame, show_stack_frame,
+	show_frame_info): add prototypes.
+
+	* gdbcmd.h (togglelist, stoplist): declare.
+
+	* gdbcore.h (read_memory_string): declare it.
+	(exec_file_attach): add prototype.
+
+	* inflow.c (terminal_is_ours): make non static.
+
+	* minsyms.c: minor spacing change.
+
+	* parser-defs.h (parse_nested_classes_for_hpacc): add prototype.
+	(find_template_name_end): add prototype.
+
+	* scm-lang.c (scm_unpack): cast svalue to (int).
+
+	* top.h: declare it.
+	
+	* valprint.h (print_binary_chars): new prototype definition.
+	(print_octal_chars): new prototype definition.
+	(print_decimal_chars): new prototype definition.
+
+Thu Dec 10 07:14:56 1998  Andrew Cagney  <cagney@chook>
+
+	* config/arm/tm-arm.h, arm-tdep.c: Replace REGISTER_NAMES with
+ 	REGISTER_NAME.
+	* mn10300-tdep.c, config/mn10300/tm-mn10300.h: Ditto.
+	* sh-tdep.c, config/sh/tm-sh.h: Ditto.
+
+	* defs.h (REGISTER_NAME): Provide default for old targets.
+	* defs.h, infcmd.c: Rename reg_names to gdb_register_names.
+	
+	* tracepoint.c, target.c, parse.c, infcmd.c, remote-udi.c,
+ 	expprint.c, infcmd.c, printcmd.c, eval.c, stack.c, findvar.c,
+ 	remote-udi.c, config/alpha/tm-alpha.h, remote-sim.c, d30v-tdep.c,
+ 	config/mips/tm-mips.h, hppa-tdep.c: Use REGISTER_NAME.
+
+1998-12-08  James E Wilson  <wilson@wilson-pc.cygnus.com>
+
+	* config/i960/mon960.mt (SIM_OBJS, SIM): Define.
+
+Tue Dec  8 16:49:24 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* NEWS: Add mentions of newly-added configurations.
+
+1998-12-08  Philippe De Muyter  <phdm@macqel.be>
+
+        * config/xm-aix4.h (SIGWINCH_HANDLER): Function `aix_resize_window'
+        must accept a signal number as parameter.
+        * config/rs6000/xm-rs6000.h (SIGWINCH_HANDLER): Ditto.
+        * utils.c (initialize_utils): Give a parameter to `SIGWINCH_HANDLER'.
+
+        * inferior.h (register_valid): Variable's type is `SIGNED char', not
+        `char'.
+        * findvar.c (register_valid): Ditto.
+
+        * defs.h (make_cleanup_func): Protect parameter list by `PARAMS'.
+        * gdbthread.h (unbind_target_thread_vector): Likewise. 
+
+Tue Dec  8 15:09:44 1998  Edith Epstein  <eepstein@sophia.cygnus.com>
+
+        Merged in m68k-linux patch from Andreas Schwab
+ 
+        1998-12-01  Andreas Schwab  <schwab@issan.cs.uni-dortmund.de>
+ 
+        * Makefile.in, configure.host, configure.tgt: Add support for
+        m68k-linux.
+        * config/m68k/linux.mh: New file.
+        * config/m68k/linux.mt: New file.
+        * config/m68k/nm-linux.h: New file.
+        * config/m68k/tm-linux.h: New file.
+        * config/m68k/xm-linux.h: New file.
+        * gdb/m68klinux-nat.c: New file.
+        * gdbserver/low-linux.c: Add support for m68k-linux.
+        * gdb/config/m68k/tm-m68k.h (NUM_FREGS): New macro.
+
+1998-12-07  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* config/i386/xm-cygwin.h: Remove REQUEST_QUIT definition.
+	* config/powerpc/xm-cygwin.h: Ditto.
+
+1998-12-07  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	* rs6000-tdep.c (pop_frame): Correctly find the registers saved in
+	the stack frame.  Their offset from the previous stack frame is in
+	fdata.gpr_offset and fdata.fpr_offset, not fdata.offset.
+	(gdb.base/return.exp)
+	* config/rs6000/tm-rs6000.h: Doc fixes.
+
+1998-12-03  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+        * monitor.c (monitor_read_memory): Zero out pattern buffers
+        before calling re_search.
+        (parse_register_dump): Ditto.
+
+Thu Dec  3 10:37:22 EST 1998  Zdenek Radouch   (radouch@cygnus.com)
+
+	FR30 updates - still very preliminary.
+	* configure.tgt
+	* fr30-tdep.c
+	* config/fr30/tm-fr30.h
+	
+Thu Dec  3 16:30:35 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* ax-gdb.c: Include target.h.
+
+Tue Dec  3 10:59:00 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* ax-gdb.c (_initialize_ax_gdb), i960-tdep.c (pop_frame),
+ 	monitor.c (flush_monitor_dcache, longlongendswap), remote-array.c
+ 	(hexword2ascii), w89k-rom.c (init_w89k_cmds), z8k-tdep.c
+ 	(init_frame_pc, extract_return_value): Make return type void.
+	* monitor.c (monitor_write_even_block): Make return type explicit.
+	(monotor_read_memory_block): Delete function.
+	* monitor.h: Update.
+	* remote.c (remote_get_threadlist, remote_update_threads),
+ 	remote-array.c (array_get_packet), remote-rdi.c (Fail): Always
+ 	return a value.
+	* m32r-tdep.c (m32r_fix_call_dummy): From Michael Snyder, void
+ 	function.
+	* jv-valprint.c (java_val_print): From Stu Grossman. Return 0 by
+ 	default.
+	
+Wed Dec  2 15:11:38 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* tracepoint.c: Move default definition of 
+	TARGET_VIRTUAL_FRAME_POINTER from here to target.h.
+	* target.h: Add default definition of TARGET_VIRTUAL_FRAME_POINTER.
+	* ax-gdb.c (gen_frame_args_address, gen_frame_locals_address):
+	use TARGET_VIRTUAL_FRAME_POINTER to determine frame pointer.
+	(gen_trace_for_expr): new argument, address of tracepoint, 
+	gets passed to new_agent_expr and added to struct agent_expr.
+	(is_nontrivial_conversion): call to new_agent_expr now requires
+	a dummy argument.  (agent_command): use get_current_frame() to
+	get current PC scope; pass it to gen_trace_for_expr.
+	* ax-general.c (new_agent_expr): new argument, address of 
+	tracepoint; store it in new field of struct agent_expr.
+	* ax.h (struct agent_expr): add new field for tracepoint address.
+	* ax-gdb.h: change prototypes to match above changes.
+
+	* m32r-tdep.c (decode_prologue): If no branch or push fp is found,
+	but there's a stack adjust, then use that as the end of prologue.
+	(m32r_skip_prologue): don't skip past the first line if there is 
+	line info.  (m32r_virtual_frame_pointer): new function.
+	(m32r_fix_call_dummy): no return value needed.
+	
+Tue Dec  1 10:59:00 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* ocd.c (remote_timeout), (BDM_BREAKPOINT), monitor.c (readchar),
+ 	remote.c: Cleanup closing of open comments.
+
+Mon Nov 30 16:04:03 1998  Doug Evans  <devans@canuck.cygnus.com>
+
+	* config/fr30/tm-fr30.h (INNER_THAN): Add parameters.
+
+Mon Nov 30 11:18:48 1998  Andrew Cagney  <cagney@chook>
+
+	* frame.h (FRAME_CHAIN_VALID): Default to
+ 	default_frame_chain_valid.
+	* blockframe.c (default_frame_chain_valid): New function.
+	
+	* frame.h (FRAME_CHAIN_VALID_ALTERNATIVE): Delete references
+	* blockframe.c (alternate_frame_chain_valid): New function.
+	* config/mips/tm-mipsv4.h, config/m88k/tm-delta88v4.h,
+ 	config/m68k/tm-monitor.h, config/m68k/tm-m68kv4.h,
+ 	config/i386/tm-i386v4.h, config/i386/tm-i386nw.h,
+ 	config/h8300/tm-h8300.h: Update.
+
+	* blockframe.c (nonnull_frame_chain_valid): New function.
+	* config/m68k/tm-os68k.h, config/m68k/tm-vx68.h,
+ 	config/m68k/tm-apollo68b.h, config/i960/tm-vx960.h,
+ 	config/arc/tm-arc.h: Update FRAME_CHAIN_VALID.
+
+	* hppa-tdep.c (frame_chain_valid, hppa_frame_chain_valid),
+ 	remote-vx29k.c (get_fp_contents, vx29k_frame_chain_valid),
+ 	arm-tdep.c (frame_chain_valid, arm_frame_chain_valid): Rename
+ 	functions so that they are name space clean.
+	* config/pa/tm-hppa.h, config/a29k/tm-vx29k.h,
+ 	config/arm/tm-arm.h: Update FRAME_CHAIN_VALID.
+	
+	* gould-tdep.c (gould_frame_chain_valid), d30v-tdep.c
+ 	(d30v_frame_chain_valid), d10v-tdep.c (d10v_frame_chain_valid):
+ 	New functions.
+	* config/gould/tm-np1.h, config/gould/tm-pn.h,
+ 	config/d30v/tm-d30v.h, config/d10v/tm-d10v.h: Update
+ 	FRAME_CHAIN_VALID.
+
+Sun Nov 29 11:18:37 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* z8k-tdep.c (z8k_addr_bits_remove), w65-tdep.c
+ 	(w65_addr_bits_remove), h8500-tdep.c (h8500_addr_bits_remove),
+ 	m88k-tdep.c (m88k_addr_bits_remove): Function to clean up an
+ 	address.
+	* config/z8k/tm-z8k.h, config/w65/tm-w65.h, config/m88k/tm-m88k.h,
+ 	config/h8500/tm-h8500.h: Define ADDR_BITS_REMOVE to call targets
+ 	corresponding function.
+	* z8k-tdep.c (saved_pc_after_call): Update.
+
+Sat Nov 28 12:24:31 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* config/z8k/tm-z8k.h, config/w65/tm-w65.h, config/vax/tm-vax.h,
+ 	config/v850/tm-v850.h, config/tahoe/tm-tahoe.h,
+ 	config/sparc/tm-sparc.h, config/sh/tm-sh.h,
+ 	config/rs6000/tm-rs6000.h, config/pyr/tm-pyr.h,
+ 	config/pa/tm-hppa.h, config/ns32k/tm-umax.h,
+ 	config/ns32k/tm-merlin.h, config/none/tm-none.h,
+ 	config/mn10300/tm-mn10300.h, config/mn10200/tm-mn10200.h,
+ 	config/mips/tm-mips.h, config/m88k/tm-m88k.h,
+ 	config/m68k/tm-m68k.h, config/m32r/tm-m32r.h,
+ 	config/i960/tm-i960.h, config/i386/tm-i386.h,
+ 	config/h8500/tm-h8500.h, config/h8300/tm-h8300.h,
+ 	config/gould/tm-pn.h, config/gould/tm-np1.h, config/arm/tm-arm.h,
+ 	config/convex/tm-convex.h, config/d10v/tm-d10v.h,
+ 	config/alpha/tm-alpha.h, config/a29k/tm-a29k.h: Add parameters to
+ 	macro INNER_THAN.
+
+	* valops.c (push_word, value_push, call_function_by_hand),
+ 	breakpoint.c (bpstat_stop_status), blockframe.c
+ 	(generic_push_dummy_frame, generic_frame_chain_valid), inferior.h
+ 	(PC_IN_CALL_DUMMY), infrun.c (wait_for_inferior): Update use of
+ 	INNER_THAN.
+
+Fri Nov 27 11:00:25 1998  Andrew Cagney  <cagney@chook>
+
+	* target.h (one_stepped): Move global from here.
+	* infrun.c (singlestep_breakpoints_inserted_p): To here. Rename.
+  	Make static.
+	(wait_for_inferior): Update.
+	(resume): Update. Set variable after call to SOFTWARE_SINGLE_STEP.
+	
+	* target.h (NO_SINGLE_STEP): Replace with SOFTWARE_SINGLE_STEP_P
+ 	and SOFTWARE_SINGLE_STEP.
+	* config/sparc/tm-sparc.h, config/rs6000/tm-rs6000.h,
+ 	config/arc/tm-arc.h: Update.
+	* rs6000-tdep.c (rs6000_software_single_step), sparc-tdep.c
+ 	(sparc_software_single_step), arc-tdep.c (arc_single_step): New
+ 	functions. Replace function single_step.
+	
+	* config/mips/tm-mips.h (STEP_SKIPS_DELAY_P): Define.
+	* infrun.c (proceed): Cleanup.
+
+Thu Nov 26 11:19:15 1998  Andrew Cagney  <cagney@amy.cygnus.com>
+
+	* config/alpha/tm-alpha.h (ABOUT_TO_RETURN): Replace macro.
+	* alpha-tdep.c (alpha_about_to_return): With new function.
+	(heuristic_proc_start): Update.
+	* config/mips/tm-mips.h (ABOUT_TO_RETURN), mips-tdep.c
+ 	(heuristic_proc_start, mips_about_to_return): Ditto.
+	* config/ns32k/tm-merlin.h (ABOUT_TO_RETURN),
+ 	config/ns32k/tm-umax.h (ABOUT_TO_RETURN), ns32k-tdep.c
+ 	(ns32k_about_to_return, ns32k_get_enter_addr): Ditto.
+
+	* config/z8k/tm-z8k.h, config/w65/tm-w65.h, config/vax/tm-vax.h,
+ 	config/tahoe/tm-tahoe.h, config/sparc/tm-sparc.h,
+ 	config/sh/tm-sh.h, config/rs6000/tm-rs6000.h, config/pyr/tm-pyr.h,
+ 	config/pa/tm-hppa.h, config/m88k/tm-m88k.h, config/m68k/tm-m68k.h,
+ 	config/i960/tm-i960.h, config/i386/tm-i386.h,
+ 	config/h8500/tm-h8500.h, config/h8300/tm-h8300.h,
+ 	config/gould/tm-pn.h, config/gould/tm-np1.h,
+ 	config/convex/tm-convex.h, config/arm/tm-arm.h,
+ 	config/arc/tm-arc.h, config/a29k/tm-a29k.h: Delete macro
+ 	ABOUT_TO_RETURN.
+	* config/w65/tm-w65.h (RTL, RTS): Delete macros.
+	* h8500-tdep.c (about_to_return): Delete function.
+
+Thu Nov 26 11:19:15 1998  Andrew Cagney  <cagney@chook.cygnus.com>
+
+	* rs6000-tdep.c (rs6000_breakpoint_from_pc): Change big_breakpoint
+ 	and little_breakpoint to char[] from char*.
+	* remote-array.c (array_insert_breakpoint): Change bp_addr to
+ 	CORE_ADDR type.
+
+Wed Nov 25 00:13:06 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* vx-share/xdr_ld.c (xdr_ldtabl): Cast second arg to char**
+ 	instead of char*.
+
+	* configure.tgt (v850): Only build v850ice when cygwin and gui.
+	* configure.in: Add parameter to --enable-build-warnings.
+	* configure: Re-build.
+
+	* c-exp.y (parse_number): Rewrite shift to pacify GCC.
+
+	* config/i960/tm-i960.h (BREAKPOINT): Delete definition - simply
+ 	wrong.
+
+	* monitor.c (compile_pattern): Make val const char*.
+	(monitor_wait_cleanup): Make old_timeout void*, pointing at
+ 	old_timeout.
+	(monitor_wait): Update.
+
+	* remote-udi.c, remote-sim.c, remote-e7000.c, hppa-tdep.c,
+ 	remote-mips.c, sparcl-tdep.c, xcoffread.c: Cast parameters passed
+ 	to make_cleanup to use the new make_cleanup_func typedef.
+
+	* alpha-tdep.c (MASK): Use LONGEST to avoid arithmetic overflow.
+
+	* config/a29k/tm-a29k.h (TRANSPARENT): Rename macro to
+ 	TRANSPARENT_FRAME. Avoid name-space clash.
+	* a29k-tdep.c (init_frame_info): Update.
+
+Wed Nov 25 20:37:00 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* rs6000-tdep.c (rs6000_breakpoint_from_pc): Change big_breakpoint
+ 	and little_breakpoint to char[] from char*.
+	* mem-break.c (memory_insert_breakpoint,
+ 	memory_remove_breakpoint): Pass address of bplen.
+	* remote-array.c (array_insert_breakpoint): Change bp_addr to
+ 	CORE_ADDR type.
+
+Tue Nov 24 15:46:33 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* config/mn10300/tm-mn10300.h (TARGET_VIRTUAL_FRAME_POINTER):
+	new target macro.
+	* mn10300-tdep.c (mn10300_virtual_frame_pointer): new function.
+	* tracepoint.c (encode_actions): Use the new target macro to
+	determine the virtual frame pointer, for collecting locals/args.
+	(add_local_symbols, collect_symbol): add a register/offset pair of
+	arguments so that the virtual frame pointer can be passed in.
+
+1998-11-24  Felix Lee  <flee@cygnus.com>
+
+	* procfs.c (procfs_wait): handle syscall events first.
+	
+	* procfs.c (GDB_GREGSET_TYPE, GDB_FPREGSET_TYPE): new macros.
+	* config/sparc/xm-sun4sol2.h: use them.
+	* core-sol2.c: don't #undef gregset_t and fpregset_t.
+	* sol-thread.c: ditto.
+	* sparc-tdep.c: ditto.
+	
+Tue Nov 24 14:13:10 1998  Andrew Cagney  <cagney@chook>
+
+	* breakpoint.c (memory_breakpoint_size): Delete global.
+	(read_memory_nobpt): Determine real breakpoint address and size
+ 	using BREAKPOINT_FROM_PC.
+
+	* defs.h (breakpoint_from_pc_fn): BREAKPOINT_FROM_PC function
+ 	template.
+	* target.h, mem-break.c (memory_breakpoint_from_pc):
+ 	Rewrite. Always define.  Return NULL when memory breakpoints are
+ 	not supported.
+	(memory_insert_breakpoint, memory_remove_breakpoint): Call
+ 	BREAKPOINT_FROM_PC.
+	* target.h (BREAKPOINT_FROM_PC): Provide default.
+	* gdbint.texinfo (BREAKPOINT_FROM_PC): Document.
+
+	* config/rs6000/tm-rs6000.h (BREAKPOINT): Delete macro.
+ 	(BREAKPOINT_FROM_PC): Define.
+ 	({BIG,LITTLE}_BREAKPOINT): Move macros from here.
+	* rs6000-tdep.c: To here.
+ 	(rs6000_breakpoint_from_pc): New function.
+
+	* config/mn10300/tm-mn10300.h (BREAKPOINT): Delete macro.
+ 	(BREAKPOINT_FROM_PC): Define, call.
+	* mn10300-tdep.c (mn10300_breakpoint_from_pc): New function.
+
+	* config/mips/tm-mips.h ({BIG,LITTLE}_BREAKPOINT,
+ 	IDT_{BIG,LITTLE}_BREAKPOINT, PMON_{BIG,LITTLE}_BREAKPOINT,
+ 	MIPS16_{BIG,LITTLE}_BREAKPOINT): Move macros from here.
+	* mips-tdep.c: To here.
+
+	* config/arm/tm-arm.h ({BIG,LITTLE}_BREAKPOINT): Delete macros.
+ 	({ARM,THUMB}_{BE,LE}_BREAKPOINT): Move macros from here.
+	* arm-tdep.c: To here.
+	
+	* remote-array.c (memory_breakpoint_size): Delete variable.
+	(array_insert_breakpoint): Obtain breakpoint size using
+ 	BREAKPOINT_FROM_PC.
+	* remote-st.c (memory_breakpoint_size, st2000_insert_breakpoint):
+ 	Ditto.
+	* remote-os9k.c (memory_breakpoint_size,
+ 	rombug_insert_breakpoint): Ditto.
+	* remote-e7000.c (memory_breakpoint_size): Ditto.
+
+Mon Nov 23 11:38:40 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* symfile.c (deduce_language_from_filename): rewrite so as to 
+	work from a table of filename extensions, modifiable by the user.
+	(filename_language_table): new data structure.
+	(set_ext_lang_command): new function for new command, "set
+	extension-language".  (info_extension_language_command): new
+	function for new command "info extension-languages".
+	(add_filename_language, init_filename_language_table): new
+	support functions for the above.
+	* language.c (language_enum): new function.  Support for above.
+
+Mon Nov 23 10:47:54 1998  Andrew Cagney  <cagney@chook.cygnus.com>
+
+	* config/sh/tm-sh.h, config/mn10200/tm-mn10200.h,
+ 	config/m32r/tm-m32r.h, config/arm/tm-arm.h, config/i960/tm-i960.h,
+ 	config/gould/tm-np1.h, config/d10v/tm-d10v.h,
+ 	config/v850/tm-v850.h, config/pa/tm-hppa.h, config/a29k/tm-a29k.h,
+ 	config/mn10300/tm-mn10300.h, config/mips/tm-mips.h
+ 	(USE_STRUCT_CONVENTION): Cleanup, define macro as function.
+	
+	* sh-tdep.c (sh_use_struct_convention), mn10200-tdep.c
+ 	(mn10200_use_struct_convention), i960-tdep.c
+ 	(i960_use_struct_convention), gould-tdep.c
+ 	(gould_use_struct_convention), d10v-tdep.c
+ 	(d10v_use_struct_convention), v850-tdep.c
+ 	(v850_use_struct_convention), hppa-tdep.c
+ 	(hpha_use_struct_convention), m32r-tdep.c
+ 	(m32r_use_struct_convention), arm-tdep.c
+ 	(arm_use_struct_convention), mn10300-tdep.c
+ 	(mn10300_use_struct_convention), a29k-tdep.c
+ 	(a29k_use_struct_convention), mips-tdep.c
+ 	(mips_use_struct_convention): New functions
+
+	* value.h, values.c (generic_use_struct_convention): New function,
+ 	replace macro.
+	* values.c (USE_STRUCT_CONVENTION): Macro defaults to function
+ 	generic_use_struct_convention.
+
+Sat Nov 21 17:15:40 1998  Philippe De Muyter  <phdm@macqel.be>
+
+	* breakpoint.c (bpstat_stop_status): Do not increment hit_count
+	of breakpoint if condition is not true. 
+
+	* coffread.c (coff_symtab_read): Discard C_LABEL's that are not
+	function entry points, to avoid getting them in the stack dump
+	instead of the actual function.
+
+	* config/m68k/delta68.mh (NAT_FILE): Undo 1998-08-18 change;
+ 	without NAT_FILE definition, configure will assume that GDB cannot
+ 	run native.
+	* config/m68k/nm-delta68.h (KERNEL_U_SIZE): New macro.
+	* delta68-nat.c (kernel_u_size): New function.
+
+Fri Nov 20 10:13:03 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* buildsym.c (end_symtab): Cleanup PROCESS_LINENUMBER_HOOK.
+
+Thu Nov 19 15:21:04 1998  Geoffrey Noer  <noer@cygnus.com>
+
+	* rdi-share/host.h: if compiling under Cygwin, make sure new
+	preprocessor define is defined.  Define it if not.
+	* rdi-share/hostchan.h: ditto
+	* rdi-share/aclocal.m4: regenerate
+	* rdi-share/configure: regenerate
+
+Thu Nov 19 14:43:44 1998  Geoffrey Noer  <noer@cygnus.com>
+
+	* configure.in: switch back to checking __CYGWIN32__
+	* configure: regenerate
+
+Thu Nov 19 09:53:00 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* exec.c (exec_file_command): Cleanup. Replace #if
+ 	NEED_TEXT_START_END with if().
+	* config/pa/nm-hppah.h (NEED_TEXT_START_END): Redefine to be 1.
+	* config/convex/tm-convex.h (NEED_TEXT_START_END): Ditto.
+	* config/gould/tm-np1.h (NEED_TEXT_START_END): Ditto.
+	* config/a29k/tm-a29k.h (NEED_TEXT_START_END): Ditto.
+
+Thu Nov 19 13:06:22 1998  Geoffrey Noer  <noer@cygnus.com>
+
+	* main.c: Wait until more time has passed before calling
+	new cygwin_ funcs, revert back to the cygwin32_ ones for now.
+	* win32-nat.c: Ditto.
+
+Wed Nov 18 15:03:17 1998  Andrew Cagney  <cagney@chook.cygnus.com>
+
+	* 29k-share/udi/udip2soc.c (UDIConnect): Replace sys_errlist with
+ 	strerror.
+
+Mon Nov 16 14:17:05 1998  Geoffrey Noer  <noer@cygnus.com>
+
+	* defs.h: if compiling under Cygwin, define __CYGWIN__ if
+	__CYGWIN32__ is defined and __CYGWIN__ isn't for backwards
+	compatibility.
+
+Fri Nov 13 00:15:08 1998  Geoffrey Noer  <noer@cygnus.com>
+
+	Changes to account for name change from cygwin32 to cygwin and
+	clean up Win32-related ifdefs.
+	
+	* configure.tgt: check for cygwin* instead of cygwin32.
+	New cygwin gdb_target variable loses the "32".
+	* configure.host: check for cygwin* instead of cygwin32.
+	New cygwin gdb_host variable loses the "32".
+	* configure.in: test __CYGWIN__ instead of __CYGWIN32__,
+	rename gdb_cv_os_cygwin32 variable to drop the "32".  Call
+	AM_EXEEXT instead of AC_EXEEXT since that isn't in a released
+	autoconf yet.
+	* configure: regenerate.
+
+	* main.c: drop "32" from cygwin_ funcs, include sys/cygwin.h where
+	cygwin path conv protos live, instead of adding a proto here for
+	them here.
+        * {main.c, ser-tcp.c, ser-unix.c, top.c}: check __CYGWIN__
+	instead of __CYGWIN32__.
+	* source.c: thoughout, check _WIN32 instead of WIN32.
+	
+	* config/i386/cygwin32.mh: delete.
+	* config/i386/cygwin.mh: new file, was cygwin32.mh.
+	* config/i386/cygwin32.mt: delete.
+	* config/i386/cygwin.mt: new file, was cygwin32.mt.
+	* config/i386/tm-cygwin32.h: delete.
+	* config/i386/tm-cygwin.h: new file, was tm-cygwin32.h.
+	* config/i386/xm-cygwin32.h: delete.
+	* config/i386/xm-cygwin.h: new file, was xm-cygwin32.h.
+	* config/i386/xm-windows.h: #include xm-cygwin.h now.
+	* config/powerpc/cygwin32.mh: delete.
+	* config/powerpc/cygwin.mh: new file, was cygwin32.mh.
+	* config/powerpc/cygwin32.mt: delete.
+	* config/powerpc/cygwin.mt: new file, was cygwin32.mt.
+	* config/powerpc/tm-cygwin32.h: delete.
+	* config/powerpc/tm-cygwin.h: new file, was tm-cygwin32.h.
+	* config/powerpc/xm-cygwin32.h: delete.
+	* config/powerpc/xm-cygwin.h: new file, was xm-cygwin32.h.
+
+	* rdi-share/aclocal.m4: regenerate with aclocal.
+	* rdi-share/configure: regenerate with autoconf.
+	* rdi-share/{host.h, hostchan.c, hostchan.h, serdrv.c, serpardr.c,
+	unixcomm.c}: check __CYGWIN__ instead of __CYGWIN32__.
+
+Thu Nov 12 17:19:43 1998  John Metzler  <jmetzler@cygnus.com>
+
+        * remote.c (remote_get_threadinfo): Support for remote
+        multithread debugging.
+        (remote_get_threadlist): get a partial list of threads
+        (remote_threadlist_iterator): Step through all the threads
+        (init_remote_threadtests): Optional builtin unit test commands.
+
+        * thread.c (bind_target_thread_vector): Implementa a more dynamic
+        way of accessing target specific thread info functions than 
+        FIND_NEW_THREADS.
+        (target_thread_info): Function to get extended thread information.
+
+        * gdbthread.h: Export internal data structures corresponding to
+        external detailed thread info response. This is more like a 'ps'
+        command than what might be expected of host based threads. This
+        is for embedded systems.
+
+Wed Nov 11 15:47:00 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* procfs.c (proc_set_exec_trap): don't set PR_ASYNC or PR_FORK
+        in the child process for UnixWare (causes processes forked by 
+        the debuggee to hang).
+
+Mon Nov  9 12:00:36 1998  Dave Brolley  <brolley@cygnus.com>
+
+	* config/fr30/fr30.mt: New file.
+	* config/fr30/tm-fr30.h: New file.
+
+1998-11-05  Jim Wilson  <wilson@cygnus.com>
+
+	* remote-vx.c (net_read_registers, net_write_registers, 
+	vx_xver_memory, vx_resume, vx_attach, vx_detach, vx_kill): 
+	Change errno to errno_num.
+	* vx-share/xdr_ptrace.c (xdr_ptrace_return): Likewise.
+	* vx-share/xdr_ptrace.h (struct ptrace_return): Likewise.
+
+Thu Nov  5 08:41:33 1998  Christopher Faylor <cgf@cygnus.com>
+
+	* top.c (gdb_readline): Allow CRLF line termination on systems
+	which define CRLF_SOURCE_FILES.
+	* win32-nat.c: 1) Add thread support, 2) fix ability to attach to
+	a running process, and 3) implement limited support for cygwin
+	signals.
+	(thread_rec): New function.
+	(child_add_thread): Ditto.
+	(child_init_thread_list): Ditto.
+	(child_delete_thread): Ditto.
+	(do_child_fetch_inferior_registers): Ditto.
+	(do_child_store_inferior_registers): Ditto.
+	(handle_output_debug_string): Ditto.
+	(child_fetch_inferior_registers): Use do_* function to perform
+	operation.
+	(child_store_inferior_registers): Ditto.
+	(child_continue): Ditto.
+	(child_thread_alive): Ditto.
+	(cygwin_pid_to_str): Ditto.
+	(handle_load_dll): Reorganize, add first attempt at reading
+	dll names from attached processes.  Change info messages to provide
+	more information when dll is already loaded.
+	(handle_exception): Changes mandated by new thread-aware structures.
+	(child_wait): Track thread creation/destruction.  Handle cygwin
+	signals.
+	(child_create_inferior): Ditto.
+	(child_resume): Ditto.
+	(child_kill_inferior): Ditto.  Close child process handle to avoid a
+	handle leak.
+	(child_ops): Fill out child_ops fields that deal with threads.
+	* config/i386/tm-cygwin32.h: Declare function and macro needed
+	for converting a cygwin "pid" to a string.
+	* config/i386/xm-cygwin32.h: define HAVE_SIGSETMASK as 0 since
+	sigsetmask is not defined in cygwin.
+
+Thu Nov  5 08:38:18 1998  Christopher Faylor <cgf@cygnus.com>
+
+	* win32-nat.c: Remove obsolete PPC conditionals.
+
+Wed Nov  4 18:44:31 1998  Dave Brolley  <brolley@cygnus.com>
+
+	* configure.tgt: Add fr30-*-elf*.
+
+1998-11-03  Jim Wilson  <wilson@cygnus.com>
+
+	* c-exp.y (parse_number): Check TARGET_LONG_LONG_BIT when setting
+	high_bit to avoid undefined negative shift.
+
+Mon Nov  2 15:26:33 1998  Geoffrey Noer  <noer@cygnus.com>
+
+        * configure.in: Check cygwin* instead of cygwin32*.
+	* configure: regenerate
+
+Thu Oct 29 10:04:20 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	[Support for trace debugging: registers that were not collected.]
+	* remote.c (remote_fetch_registers): accept 'xxxx' in the register
+	packet, with the meaning "register value is not available".
+	Set register_valid to -1, which will connote "no value available".
+	* findvar.c (read_relative_register_raw_bytes): return failure if
+	register_valid == -1.  (value_of_register): return failure if 
+	register_valid == -1.  (read_var_value): return error if 
+	value_of_register fails for a register variable.
+	(value_from_register): return failure if register_valid == -1.
+	* eval.c (evaluate_subexp_standard): return error if 
+	value_of_register fails for a register used in an expression.
+	* infcmd.c (do_registers_info): display "value not available"
+	for registers for which register_valid == -1.
+
+	* tracepoint.c (set_raw_tracepoint): just save the filename as is
+	from the symbol table, rather than trying to prepend the dir name.
+	Also save the bfd section.  (tracepoints_info): use the section
+	when looking up the function name.
+	* tracepoint.h: add section field to tracepoint struct.
+
+Wed Oct 28 08:01:38 1998  Mark Alexander  <marka@cygnus.com>
+
+	* sparcl-tdep.c (send_resp, sparclite_serial_start,
+	sparclite_serial_write): Use remote_timeout instead of hardcoded
+	two second timeout.
+	(download): Fix adjustment of a.out load addresses.
+
+Wed Oct 28 12:32:58 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* configure.in (--enable-build-warnings): Finish rename from
+ 	--enable-warnings.
+	(enable-build-warnings): Add -Wpointer-arth, allow =* for
+ 	sim/common compatibility.
+	* configure: Re-generate.
+
+Wed Oct 21 08:44:30 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* 29k-share/udi/udip2soc.c: Replace sys_errlist with strerror().
+
+Thu Oct 22 09:56:55 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* config/rs6000/aix4.mh (NATDEPFILES): Move xcoffread.o from here.
+	* config/rs6000/aix4.mt (TDEPFILES): To here.
+
+Wed Oct 21 10:02:31 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* rdi-share/unixcomm.c: Provide definitions of SERPORT and PARPORT
+ 	on BSD hosts.
+
+1998-10-19  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* configure.in (AM_EXEEXT): Use AC_EXEEXT instead.
+	* configure: Regenerated.
+
+Sat Oct 17 17:39:23 1998  Felix Lee  <flee@cygnus.com>
+
+	* core-sol2.c: #include <sys/types.h>, for sol2.7 weirdness.
+
+Fri Oct 16 15:31:38 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* m32r-tdep.c (decode_prologue): Return failure if we reach 
+	the end of the function without finding the end of the prologue.
+
+1998-10-16  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* command.c copying.c copying.awk core-aout.c core-regset.c
+	  corelow.c dcache.c i386-tdep.c i386v4-nat.c i387-tdep.c
+	  infcmd.c infptrace.c infrun.c remote.c solib.c symfile.c
+	  symmisc.c valarith.c: Add prototypes.
+
+	* defs.h: Add prototype for utils.c::do_run_cleanups.
+
+	* gdbtypes.c: Add prototypes.
+	(make_pointer_type): Add braces to remove nested if-else ambiguity.
+	(make_reference_type): Ditto.
+
+	* printcmd.c (printf_command): Initialize 'f' and 'string' at 
+	function startup to suppress possibly-used-before-initialized warning.
+
+	* remote-utils.c: Add prototypes.
+	(sr_pollchar): Add braces to remove nested if-else ambiguity.
+
+	* ser-tcp.c: Add prototypes.
+	(wait_for): Add braces to remove nested if-else ambiguity.
+	(tcp_readchar): Ditto.
+
+	* ser-unix.c: Add prototypes.
+	(get_tty_state): Don't define errno here.
+	(hardwire_readchar): Only define 't' if we are compiling in a Cygwin
+	environment.
+
+	* symtab.c: Add prototypes.
+	(find_methods): Add braces to remove nested if-else ambiguity.
+	(search_symbols): Set 'i' to an initial value to suppress a
+	possibly-used-before-initialized warning.
+
+	* valops.c: Add prototypes.
+	(value_cast): Set 'eltype2' to an initial value to suppress a
+	possibly-used-before-initialized warning.
+	(value_of_variable): Add braces to remove nested if-else ambiguity.
+	(value_of_this): Ditto.
+
+	* valprint.c: Add prototypes.
+	(print_floating): Add braces to remove nested if-else ambiguity.
+
+Thu Oct 15 19:50:48 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* tm-sp64.h (SETUP_ARBITRARY_FRAME, FRAME_SPECIFICATION_DYADIC):
+	Remove, nevermore used.
+
+Thu Oct 15 16:55:00 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* command.c: Include "wait.h" after, rather than before, <wait.h>.
+  	"wait.h" was defining all WIF* macro's instead of filling in those
+ 	that <wait.h> missed.
+
+1998-10-14  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* defs.h: Move _initialize_printcmd, _initialize_stack,
+ 	_initialize_blockframe out of here and in to their respective .c
+ 	files.
+	* blockframe.c: Move _initialize_blockframe prototype to here.
+	* printcmd.c: Move _initialize_printcmd prototype to here.
+	* stack.c: Move _initialize_stack prototype to here.
+
+	* source.c, symtab.h: Move _initialize_source prototype to the .c
+	file.
+	* values.c, value.h: Move _initialize_values prototype to the .c file.
+	* gdbthread.h, thread.c: Move _initialize_thread prototype to the .c 
+	file.
+	* breakpoint.c, breakpoint.h: Move _initialize_breakpoint prototype 
+        to the .c file.
+
+	* abug-rom.c alpha-nat.c alpha-tdep.c annotate.c ax-gdb.c bcache.c:
+	Standardize comments for the prototype section of these files.
+
+	* configure.in: Look in libc for wctype before looking for it in libc.
+
+Tue Oct 13 18:56:51 1998  Felix Lee  <flee@cygnus.com>
+
+	* sol-thread.c (ps_pstop, etc): simple test for proc_service.h
+ 	version didn't work for sol2.6; pushed it to autoconf.
+	* configure.in (gdb_cv_proc_service_is_old): new test.
+	* acconfig.h (PROC_SERVICE_IS_OLD): new define.
+	* configure, config.in: regenerate.
+
+1998-10-13  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* blockframe.c (find_pc_sect_partial_function): Add braces to avoid
+	possible nested-if confusion.
+	* breakpoint.c (breakpoint_here_p): Ditto.
+	(breakpoint_inserted_here_p): Ditto.
+	(breakpoint_thread_match): Ditto.
+
+	* gnu-regex.c: Define _REGEX_RE_COMP only if it isn't already defined.
+	* gnu-regex.h: Define _REGEX_RE_COMP to pick up old compatability 
+	prototypes.
+
+	* symtab.h: Add prototype for _initialize_source.
+	* value.h: Add prototype for _initialize_value.
+
+	* defs.h: Include sys/types.h or stddef.h to get size_t.
+	(make_cleanup): Add make_cleanup_func typedef and switch to using 
+        a prototype for this function.
+	(mfree): Add prototypes for mmalloc, mrealloc, mfree if we aren't
+	using mmalloc.
+
+	* ax-gdb.c breakpoint.c coffread.c corelow.c dbxread.c
+ 	dwarf2read.c dwarfread.c elfread.c eval.c exec.c infcmd.c infrun.c
+ 	mipsread.c nlmread.c os9kread.c parse.c printcmd.c symfile.c
+ 	symmisc.c symtab.c thread.c top.c tracepoint.c typeprint.c
+ 	valops.c: Cast parameters passed to make_cleanup to use the new
+ 	make_cleanup_func typedef.
+
+Tue Oct 13 00:51:48 1998  Felix Lee  <flee@cygnus.com>
+
+	* sol-thread.c (ps_pstop, etc): different solaris versions have
+ 	slightly different prototypes in proc_service.h; compensate.
+
+1998-10-12  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+        * Makefile.in (AWK): Unused; remove.
+        * configure.in: Remove unused autoconf checks for MINIX, memcpy,
+        poll, select, strings.h.
+        * config.in: Regenerated.
+        * configure: Regenerated.
+
+1998-10-12  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* configure.in: Check for sys/debugreg.h, asm/debugreg.h.
+	* i386v-nat.c: Include asm/debugreg.h, sys/debugreg.h if it is not
+	present.
+
+Sun Oct 11 12:08:07 1998  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>
+
+	* dwarf2read.c (dwarf2_build_psymtabs_hard):  Do not adjust the
+	address range of a compilation unit without children.
+
+	* mdebugread.c (parse_partial_symbols):  Fix handling of stabs
+	continuations, use xmalloc and xrealloc.
+
+Fri Oct  9 18:14:43 1998  Mark Alexander  <marka@cygnus.com>
+
+	* rs6000-tdep.c: Don't include tm.h twice.
+
+1998-10-08  Keith Seitz  <keiths@cygnus.com>
+
+	* main.c (main): Remove calls to {pre,post}_add_symbol_hooks.
+	There should be sufficient information/hooks now to eliminate
+	this hack.
+
+	* exec.c (file_command): Add a new hook here to inform ui's
+	when the exec file has changed. Adding it here allows the
+	ui to be informed after symbol reading.
+
+	* gdbcore.h: Add declaration of file_changed_hook.
+
+Thu Oct  8 08:40:42 1998  Mark Alexander  <marka@cygnus.com>
+
+	* rs6000-tdep.c (get_saved_register): Define only if
+	USE_GENERIC_DUMMY_FRAMES is defined.
+
+1998-10-06  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+ 	Eliminate a few warnings from the compiler.
+	* breakpoint.h: Add prototype.
+	* breakpoint.c (do_enable_breakpoint): cast mem_cnt, i to (void).
+	* configure.in: Check if strdup declaration is necessary.
+	* configure: Regenerated.
+	* defs.h: Add prototypes.
+	* gdb_string.h: Only define strdup if necessary.
+	* gdbthread.h: Add prototypes.
+	* printcmd.c: Add prototyptes.
+	(disassemble_command): Remove unused variable 'section'.
+	* symtab.c: Add prototypes.
+	* symtab.h: Include gnu-regex.h, add prototype.
+	* thread.c: Add prototype.
+
+Mon Oct  5 19:44:39 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	From David Purves  <purves@apogee.com>:
+	* stabsread.c (rs6000_builtin_type): Create a complex float instead
+	of an error.
+	(read_sun_floating_type): Similarly.
+	(read_range_type): Create a complex float if self_subrange is
+ 	true.
+
+Fri Oct  2 19:42:31 1998  Stu Grossman  <grossman@babylon-5.cygnus.com>
+
+	* c-lang.c (emit_char c_printchar c_printstr), c-lang.h (c_printstr)
+	ch-lang.c (chill_printstr chill_printchar) c-valprint.c (c_val_print)
+	ch-valprint.c (chill_val_print) expprint.c (print_subexp) f-lang.c
+	(f_printstr f_printchar emit_char) f-valprint.c (f_val_print) 
+	jv-lang.c (java_printchar java_emit_char) jv-valprint.c 
+	(java_value_print java_val_print) language.c (unk_lang_printchar 
+	unk_lang_printstr unk_lang_emit_char) language.h (struct 
+	language_defn LA_PRINT_STRING LA_EMIT_CHAR) m2-lang.c (m2_printstr 
+	m2_printchar emit_char) printcmd.c (print_formatted) scm-lang.c 
+	(scm_printstr) valprint.c (val_print_string) value.h 
+	(val_print_string):  Add emit_char routines to language_desc struct 
+	to allow finer control over language specific character output issues.
+  	Add character width arg to printstr routines to allow handling of 
+	wchar_t/Unicode strings.  Fix c_printstr to handle wide characters.
+  	Supply width argument to LA_PRINT_STRING and val_print_string.
+
+	* jv-lang.c (java_object_type dynamics_objfile java_link_class_type
+	get_dynamics_objfile get_java_object_type) jv-lang.h
+	(get_java_object_type):  Make lots of things static.
+
+	* expprint.c (dump_prefix_expression dump_subexp):  Move opcode name
+	printing to common routine (op_name).
+	* (dump_subexp):  Add support for OP_SCOPE.
+
+Fri Oct  2 16:25:54 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* configure.host (i[3456]86-*-windows): Remove, no longer used.
+	* mswin: Remove directory, no longer used.
+
+Fri Oct  2 18:52:20 1998  Fernando Nasser  <fnasser@cygnus.com>
+
+	* sol-thread.c: Fixed prototypes and calls to supply_fpregset and
+ 	fill_fpregset
+
+1998-10-02  Keith Seitz  <keiths@cygnus.com>
+
+	* remote.c (remote_interrupt): Rewrite to use remote_stop.
+	(remote_interrupt_twice): Remove. remote_stop now handles it.
+	(remote_stop): New function which handles interrupting the
+	remote target so that CLUI and GUI use the same core functions
+	to achieve the same goal.
+	(remote_wait): Change to handle remote_stop properly.
+	[interrupted_already]: New static global to help remote_stop.
+	[remote_ops, extended_remote_ops]: Add remote_stop for to_stop member.
+
+	* target.c: Rename static function "ignore" to "target_ignore" and
+	export it so that gdb can determin if some target vector member is
+	actually not defined. Replace all occurances of ignore.
+
+	* target.h: Export target_ignore.
+
+Fri Oct  2 03:51:48 1998  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>
+
+	* target.c (target_xfer_memory):  Handle requests with zero
+	transfer length right away.
+
+	* values.c (unpack_double):  Set up code, length and signedness of
+	type _after_ checking for typedef.
+
+Thu Oct  1 15:39:27 EDT 1998 Frank Ch. Eigler <fche@cygnus.com>
+
+	* breakpoint.c (bpstat_stop_status): Do not consider an
+	untripped watchpoint as a "hit".
+
+Thu Oct  1 20:52:39 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* exec.c (exec_file_command), convex-tdep.c (exec_file_command),
+ 	arm-xdep.c (exec_file_command), remote-rdp.c
+ 	(remote_rdp_create_inferior), remote-os9k.c
+ 	(rombug_create_inferior), remote-mm.c (mm_create_inferior),
+ 	remote-eb.c (eb_create_inferior), remote-es.c
+ 	(es1800_create_inferior), remote-rdi.c (arm_rdi_create_inferior),
+ 	remote-sim.c (gdbsim_create_inferior), remote-utils.c
+ 	(gr_create_inferior), remote-st.c (st2000_create_inferior),
+ 	remote-nindy.c (nindy_create_inferior), remote-hms.c
+ 	(hms_create_inferior), remote-e7000.c (e7000_create_inferior),
+ 	remote-array.c (array_create_inferior), remote-adapt.c
+ 	(adapt_create_inferior): Replace "exec" with "executable" in
+ 	messages.
+
+1998-09-25  Keith Seitz  <keiths@cygnus.com>
+
+        * rdi-share/unixcomm.c: If using cygwin32, also use the SERPORT and
+        PARPORT defines for win32.
+        (Unix_MatchValidSerialDevice): For cygwin32, valid serial port names
+        start with "com", not "/dev/tty".
+        (Unix_OpenSerial): Do not use O_NONBLOCK on cygwin32.
+
+        * rdi-share/devsw.c (DevSW_Close): Free the device's state 
+        (SwitcherState) so that the device may be reopened.
+
+        * remote-rdi.c (mywritec): Send all output through gdb's *_unfiltered
+        functions, ignoring non-ASCII chars, so that non-tty UI's can snarf
+        the output from fputs_hook.
+        (mywrite): Ditto.
+        (arm_rdi_open): Set inferior_pid.
+        (arm_rdi_detach): Pop the target off the target stack so that
+        users can attach and detach multiple times.
+        (arm_rdi_close): Close the opened device and reset inferior_pid, too.
+
+1998-09-24  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* configure.in: Change --enable-warnings to --enable-build-warnings.
+	* configure: Updated.
+
+1998-09-24  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* configure.in (WARN_CFLAGS): Add -Wmissing-prototypes.
+	* configure: Regenerated.
+
+1998-09-24  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* configure.in: Add --enable-warnings.
+	Adjust whitespace of other --with and --enable options so that
+	configure --help lines up correctly.
+	* aclocal.m4: Ditto.
+	* Makefile.in (WARN_CFLAGS): Add.  Set by configure.
+	* configure: Regenerated.
+
+Thu Sep 24 15:44:34 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* remote-rdi.c: Fix formatting, remove some commented-out code.
+	(init_rdi_ops): Omit needless initializations.
+
+Wed Sep 23 18:21:03 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* remote.c (remote_address_masked): New function - mask address
+ 	according to REMOTE_ADDRESS_SIZE.
+	(remote_address_size): New global.
+	(hexnumstr): New function - convert arbitrary unsigned to hex.
+	(remote_write_bytes, remote_read_bytes): Use hexnumstr to
+ 	construct packet address.  Mask address when necessary.
+	(_initialize_remote): Add "set remoteaddresssize" command, set
+ 	REMOTE_ADDRESS_SIZE variable.
+
+	* NEWS: Update.
+
+Wed Sep 23 18:08:52 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* remote.c (_initialize_remote, packet_command, print_packet):
+	Pretty print code.
+
+Wed Sep 23 12:32:54 1998    <cagney@amy.cygnus.com>
+
+	* remote.c (packet_command): Test REMOTE_DESC to determine if
+ 	remote connection is open.
+
+Tue Sep 22 22:27:24 1998  Mark Alexander  <marka@cygnus.com>
+
+	Patch from Dawn Perchik <dawn@cygnus.com>:
+	* rs6000-tdep.c (pop_frame): Handle generic dummy frames.
+	(push_arguments): Likewise.
+	(frame_saved_pc): Likewise.
+	(rs6000_frame_chain): Likewise.
+	(ppc_push_return_address): New function.
+	(get_saved_register): New function.
+	* config/powerpc/tm-ppc-eabi.h: Add generic dummy frame macros.
+
+Mon Sep 21 19:29:32 1998  Stu Grossman  <grossman@babylon-5.cygnus.com>
+
+	* defs.h utils.c (fputc_filtered):  New function.  Does the obvious...
+	* jv-lang.c (java_printchar):  Fix output of chars > 0xff.  Fold
+	java_emit_char into java_printchar.
+	* language.h (PRINT_LITERAL_FORM):  Reformat for readability.
+
+Mon Sep 21 14:38:03 1998  Catherine Moore <clm@cygnus.com>
+
+	* config/arm/tm-arm.h (*_BREAKPOINT): Define both little endian
+	and big endian breakpoint patterns.
+
+	* arm-tdep.c (arm_break_point_from_pc):  Insert either big endian
+	or little endian breakpoints depending upon target byte order.
+
+Fri Sep 18 07:53:08 1998  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>
+
+	* sol-thread.c (sol_thread_notice_signals):  Use PIDGET when
+	passing pid down to procfs_notice_signals.
+
+Wed Sep 16 14:57:14 1998  Stu Grossman  <grossman@babylon-5.cygnus.com>
+
+	* stabsread.c (resolve_symbol_reference):  Return 1 on success, 0 on
+	failure.
+	* (define_symbol):  Check return value from resolve_symbol_reference,
+	and drop symbol if it fails.
+
+Tue Sep 15 15:24:16 1998  Stu Grossman  <grossman@fencer.cygnus.com>
+
+	* stabsread.c:  Make all complaints static.
+	* Fix formatting of live range splitting code.
+	* (resolve_symbol_reference define_symbol resolve_live_range):  Change
+	errors to complaints so that bad live range symbols won't abort the
+	entire symbol table.  Handle errors by aborting just the current
+	symbol.
+	* (ref_init):  Goes away.  Folded into ref_add().
+	* (REF_MAP_SIZE):  Put parens around parameter so that args like
+	`1 + 2' get handled correctly (yes, this was a real bug).
+	* (ref_add):  Remove check for allocation failures.  Not necessary
+	when using xrealloc().  Fix pointer arithmetic problem when clearing
+	memory.  This and the previous patch prevent random SEGV's when there
+	are lots of live range symbols.
+
+Tue Sep 15 14:02:01 1998  Nick Clifton  <nickc@cygnus.com>
+
+	* remote-rdi.c: Prevent multiple attempts to close the remote
+	connection. 
+
+Tue Sep 15 10:24:17 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* printcmd.c (examine_i_type): New static - type for instructions.
+	(do_examine): For "i" format, specify examine_i_type.
+	(do_examine): Call value_at_lazy instead of value_at so that
+ 	examine data is only fetched if it is used.
+	(x_command): If examine data was not fetched, set convenience
+ 	variable "__" to void.
+	(_initialize_printcmd): Initialize examine_i_type.
+
+Sun Sep 13 01:34:59 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+ 	* blockframe.c (find_pc_sect_partial_function): use bfd section 
+	  of msymbol for end of section comparison.
+
+Fri Sep 11 14:02:49 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* tracepoint.c: clean up several unused variables and such.
+
+Fri Sep 11 12:38:34 EDT 1998  Zdenek Radouch   (radouch@cygnus.com)
+
+	* arm-tdep.c (arm_push_arguments): fixed frame construction
+
+Thu Sep 10 20:51:23 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* mn10300-tdep.c (mn10300_analyze_prologue): guard against NULL.
+
+Wed Sep  9 19:37:36 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* dbxread.c (IGNORE_SYMBOL): Remove definition, is never used.
+	* os9kread.c: Remove comment mentioning IGNORE_SYMBOL.
+
+Wed Sep  9 11:39:05 1998  Ron Unrau  <runrau@cygnus.com>
+
+	* blockframe.c(find_pc_sect_partial_function): look for min syms in
+	  the same section when trying to guess the end of a function.
+	* symfile.c(list_overlays_command): use print_address_numeric
+	* remote-sim.c: export simulator_command
+
+1998-09-08  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* breakpoint.c (bpstat_stop_status):  Declare a bp match if the
+	current fp matches the bp->fp OR if the current fp is less than
+	the bp->fp if we're looking at a bp_step_resume breakpoint.
+
+Tue Sep  8 19:42:58 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* symtab.h (struct symtab): Remove EXTRA_SYMTAB_INFO hook,
+	not currently used.
+	* symfile.c (allocate_symtab): Deprecate use of
+	INIT_EXTRA_SYMTAB_INFO here.
+
+Fri Sep  4 15:33:25 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* README: Update remote debugging and testsuite info.
+
+Thu Sep  3 13:50:20 1998  Mark Alexander  <marka@cygnus.com>
+
+	* config/mn10300/tm-mn10300.h (FP_REGNUM): Redefine to be a
+	pseudo-register, not the same as a3.
+	(D2_REGNUM, D3_REGNUM, A2_REGNUM, A3_REGNUM): Define.
+	* mn10300-tdep.c (fix_frame_pointer): New function.
+	(set_movm_offsets): Use register number macros instead of
+	hard-coded constants.
+	(mn10300_analyze_prologue): Fix to handle redefinition of FP_REGNUM.
+	(mn10300_frame_chain):  Fix to handle redefinition of FP_REGNUM;
+	use register number macros instead of hard-coded constants;
+	add missing parameter to call of mn10300_analyze_prologue.
+	(mn10300_frame_saved_pc): Use register number macros instead of
+	hard-coded constants.
+
+Tue Sep  1 12:04:57 EDT 1998  Zdenek Radouch   (radouch@cygnus.com)
+
+	Changes to support/fix ARM/ELF port.  Use MAKE_MSYMBOL_SPECIAL for
+	both ELF and COFF;
+	* elfread.c (elf_symtab_read): use ELF specific macro
+	* coffread.c (coff_symtab_read): use COFF_MAKE_MSYMBOL_SPECIAL()
+	* arm-tdep.c: separate COFF and ELF thumb processing
+			disable --mapcs-float processing
+	* dwarf2read.c: Disabled building of minimal symbols
+	* config/arm/tm-arm.h: new macros for distinguishing arm/thumb
+	* config/mips/tm-mips.h: use ELF specific macro
+
+Mon Aug 31 15:42:10 1998  Tom Tromey  <tromey@cygnus.com>
+
+	* top.c (context_hook): Define.
+
+Tue Aug 25 13:21:58 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* ax-gdb.c (gen_var_ref): Allow for typedef types.
+	(gen_cast, gen_bitfield_ref, gen_expr, gen_deref): ditto.
+
+Mon Aug 24 18:29:03 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* tracepoint.c (collect_symbol): Handle register doubles that
+	are stored in two registers.
+
+Mon Aug 24 14:39:08 1998  Mark Alexander  <marka@cygnus.com>
+
+	* sh-stub.c (undoSStep): Improve comment.
+	* sparc-tdep.c (sparc_extract_struct_value_address): Simplify to use
+	same method on both 32-bit and 64-bit machines.
+	* sparcl-tdep.c (sparclite_check_watch_resources): Simulator doesn't
+	support hardware breakpoints.
+	* config/sparc/tm-sparc.h (CALL_DUMMY): Improve comments.
+
+1998-08-20  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+        * rdi-share/Makefile.am (INCLUDES): Fix typeo.
+        * rdi-share/Makefile.in: Regenerated.
+
+1998-08-19  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+        * rdi-share/Makefile.am: Use just `INCLUDES' not `libname_INCLUDES'.
+        * rdi-share/Makefile.in: Regenerated.
+
+1998-08-19  Keith Seitz  <keiths@cygnus.com>
+
+	* v850ice.c (v850ice_stop): New function to stop the ICE.
+	(v850ice_load) Pass filename to ICE DLL.
+	(ice_stepi, ice_nexti, ice_cont): Do not directly call the gdb
+	commands -- let the GUI do it so that it can retain control
+	of the display.
+
+Wed Aug 19 15:53:52 1998  Anthony Green  <green@hoser.cygnus.com>
+
+	* i386v4-nat.c: Include sys/reg.h if present.
+
+Wed Aug 19 03:07:53 1998  Richard Henderson  <rth@cygnus.com>
+
+	* config/alpha/alpha-linux (XDEPFILES): Build ser-tcp.
+
+1998-08-18  Fernando Nasser  <fnasser@totem.to.cygnus.com>
+
+        * symtab.c (decode_line_1): For minimal symbol, SKIP_PROLOG to
+        make sure we stop after the frame pointer is locaded and backtrace
+        prints an accurate stack.  Complements changes made on Mon Jul 27
+        10:45:56 1998
+        (decode_line_2): Replaced the whitespace after ">" in a prompt
+        which has been taken away by changes made on Sun Jul 19 02:11:45
+        1998
+
+1998-08-18  Keith Seitz  <keiths@cygnus.com>
+
+	* stack.c: Define new hook, selected_frame_level_changed_hook, which
+	will be called whenever the selected stack level changes.
+	(select_frame): Call the selected_frame_level_changed_hook.
+
+Tue Aug 18 18:03:42 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* remote-rdi.c (arm_rdi_open): Pass serial device name to
+ 	Adp_OpenDevice, and include it in error reports.
+
+1998-08-18  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* configure.in: Add more header files to AC_CHECK_HEADERS.
+	* configure: Regenerated.
+
+	* command.c: Include wait.h or sys/wait.h if present.
+	* inftarg.c: Ditto.
+	* core-aout.c: Include ptrace.h or sys/ptrace.h if present, based
+	on autoconf test.
+	* infptrace.c: Ditto.
+
+	* expprint.c: Include ctype.h for isprint prototype.
+	* i386aix-nat.c: Include sys/reg.h if autoconf says it is present.
+	* i386v-nat.c: Include ptrace.h, sys/ptrace.h, and sys/reg.h if 
+	present, based on autoconf test.  
+
+	* utils.c: Include curses.h and term.h if present.
+	(puts_debug): Change 'carriage_return' local variable to return_p
+	to avoid name clash.
+
+	* config/m68k/nm-apollo68b.h: Don't define PTRACE_IN_WRONG_PLACE,
+	determine it with autoconf.
+        * config/i386/nm-linux.h: Don't define NO_SYS_REG_H, determine it
+        with autoconf.
+	* config/i386/nm-i386sco.h: Don't define NO_PTRACE_H, determine it 
+	with autoconf.
+	* config/i386/nm-i386v.h: Ditto.
+	* config/i386/nm-symmetry.h: Ditto.
+	* config/m88k/xm-cxux.h: Ditto.
+	* config/m88k/xm-dgux.h: Ditto.
+
+	* config/m68k/delta68.mh (NAT_FILE): nm-delta68.h no longer necessary.
+	* config/m68k/nm-delta68.h: Removed.
+
+Fri Aug 14 11:14:03 1998  Jeffrey A Law  (law@cygnus.com)
+
+	* mn10300-tdep.c (set_movm_offsets): Change second argument to
+	be the actual args to movm itself.  All callers changed.  Only set
+	fi->fsr.regs[x] if reg X is saved by the movm instruction.
+
+Fri Aug 14 04:18:23 1998  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>
+
+	* sol-thread.c (lwp_to_thread):  Fix error message for failing
+	td_ta_map_lwp2thr call.
+	(ps_lgetLDT):  Mask off upper bits in GS register when comparing
+	with selector.
+
+Wed Aug 12 16:30:01 1998  Frank Ch. Eigler  <fche@cygnus.com>
+ 
+	* remote-sim.c (simulator_command): Reset register cache after
+	simulator command.
+
+Wed Aug 12 09:00:26 1998  Stu Grossman  <grossman@babylon-5.cygnus.com>
+
+	* expprint.c (dump_prefix/postfix_expression):  Don't try to print
+	type expressions.
+
+Tue Aug 11 11:33:25 1998  Stu Grossman  <grossman@babylon-5.cygnus.com>
+
+	* c-typeprint.c (c_print_type):  Don't crash if varstring is null.
+	* expprint.c expression.h (dump_expression):  Rename to
+	dump_prefix_expression. 
+	* Print out the expression in normal form.  Call print_longest
+	instead of trying to do it ourselves.
+	* (dump_postfix_expression):  New function, prints out the expression
+	with indentation and better formatting and interpretation.
+	* parse.c (parse_exp_1):  Put calls to dump expressions under ifdef
+	MAINTENANCE_CMDS and expressiondebug variable.
+
+Thu Aug 6 13:20:02 1998  Ron Unrau  <runrau@cygnus.com>
+
+	* infrun.c (wait_for_inferior): use stop_func_name instead of 
+	  stop_func_start to decide that no debug info exists.
+
+Thu Jul 30 13:53:50 1998  Mark Alexander  <marka@cygnus.com>
+
+	* mips-tdep.c (mask_address_p): New variable.
+	(mips_addr_bits_remove): Test mask_address_p to decide whether
+	to mask off the upper 32 bits of addresses.
+	(_initialize_mips_tdep): Add command to set mask_address_p.
+	(mips_call_dummy_address): New function.
+	* config/mips/tm-mips.h (CALL_DUMMY_ADDRESS): Redefine to
+	call mips_call_dummy_address.
+
+1998-07-29  Fernando Nasser  <fnasser@totem.to.cygnus.com>
+
+	* symfile.c (add_symbol_file_command): Test for the from_tty
+	parameter and avoid query when not interactive.
+
+Mon Jul 27 16:11:42 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* tracepoint.c (remote_set_transparent_ranges): new function.
+	Send the start and end addresses of all loadable read-only
+	sections down to the trace target, so that it can treat them
+	as "transparent" (ie. don't care if they were collected or not).
+
+Mon Jul 27 15:38:07 1998  Mark Alexander  <marka@cygnus.com>
+
+	* mn10300-tdep.c (mn10300_analyze_prologue): Undo previous fix
+	for setting frame address in optimized code; made unnecessary
+	by compiler fixes.
+
+Mon Jul 27 10:45:56 1998  Martin M. Hunt  <hunt@cygnus.com>
+
+	* symtab.c (decode_line_1): For minimal symbol, call 
+	find_pc_sect_line() to make sure the line number gets set 
+	properly.
+	(print_symbol_info): Redeclare function void.
+
+1998-07-27  Jason Molenda  (jsm@bugshack.cygnus.com)
+
+	* config/d10v/tm-d10v.h (REGISTER_NAMES): sp -> r15.  The
+	stack pointer et al are synthesized from the SP_REGNUM (etc)
+	defines and should not be mentioned in REGISTER_NAMES.
+
+Fri Jul 24 14:41:19 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* tracepoint.c (encode_actions): Treat register names and simple
+	variable names as special cases and don't convert them to byte-
+	codes: these things can be collected far more efficiently 
+	without invoking the bytecode interpreter.
+
+Fri Jul 24 13:32:46 1998  Mark Alexander  <marka@cygnus.com>
+
+	* config/i386/tm-i386.h (STORE_STRUCT_RETURN): Make it
+	work on hosts of any endianness.
+	* config/i386/tm-i386v.h: Ditto.
+
+Fri Jul 24 07:41:12 1998  Mark Alexander  <marka@cygnus.com>
+
+	* mn10300-tdep.c (set_movm_offsets): New helper function
+	for mn10300_analyze_prologue.
+	(mn10300_analyze_prologue): Simplify by factoring out common code.
+	Fix bugs in setting frame address for optimized code.
+	Use read_memory_nobpt instead of target_read_memory.
+
+Thu Jul 23 17:01:17 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* tracepoint.c (collect_symbol): handle LOC_ARG case.
+
+Thu Jul 23 15:07:40 1998  Dawn Perchik  <dawn@cygnus.com>
+
+	* sparc-tdep.c (sparc_init_extra_frame_info): Recognize when we're
+	in a function prologue before the SAVE instruction.
+	(sparc_frame_saved_pc): Ditto.
+	* config/sparc/tm-sparc.h (EXTRA_FRAME_INFO): Add in_prologue flag.
+
+Thu Jul 23 14:58:09 1998  Dawn Perchik  <dawn@cygnus.com>
+
+	* i386-tdep.c (i386_get_frame_setup): Recognize function
+	prologues in code compiled with -fcheck-stack.
+
+Thu Jul 23 14:49:27 1998  Dawn Perchik  <dawn@cygnus.com>
+
+	* remote-mips.c (remote_mips_insert_hw_breakpoint,
+	remote_mips_remove_hw_breakpoint): New functions for hardware
+	breakpoints on LSI targets.
+	* config/mips/tm-embed.h (target_remove_hw_breakpoint,
+	target_insert_hw_breakpoint): Define to call
+	remote_mips_insert_hw_breakpoint and remote_mips_remove_hw_breakpoint,
+	respectively.
+
+1998-07-21  Fernando Nasser  <fnasser@totem.to.cygnus.com>
+
+	* source.c (print_source_lines): Print "No such file or directory"
+	just once.
+	(directory_command): same as above; resets if user issues dir.
+
+Sun Jul 19 02:11:45 1998  Martin M. Hunt  <hunt@cygnus.com>
+
+	* symtab.c (decode_line_2): Instead of printing a prompt
+	and calling command_line_input() without a prompt, just
+	call it with the proper args.  This makes the GUI work too.
+
+Fri Jul 17 9:26:50 1998  Ron Unrau  <runrau@cygnus.com>
+
+	* blockframe.c (find_pc_sect_partial_function): allow for the possi-
+	  bility of multiple symbols at the same address when finding high.
+	* breakpoint.c (resolve_sal_pc): if the function based section lookup
+	  fails, try getting the section from the minimal symbol table.
+	* parse.c (write_exp_msymbol): use symbol_overlayed_address to get
+	  the LMA of a minimal symbol if unmapped.
+	* symtab.c (find_line_symtab): change interface to return symtab 
+	  containing the best linetable found.
+	  (decode_line_1): use find_line_symtab to set val.symtab. This should
+	  improve support for source files with multiple symtabs.
+
+Wed Jul 15 11:51:33 1998  Keith Seitz  <keiths@cygnus.com>
+
+	* main.c (main): Fix violations of GNU coding standard.
+
+	* breakpoint.c: Export delete_command.
+
+	* infcmd.c: Export continue_command, stepi_command, and nexti_command.
+
+	* Makefile.in: Add target for v850ice.o.
+
+	* configure.tgt: Add cygwin32 dependencies for v850 ice.
+
+Wed Jul 15 10:58:29 1998  Nick Clifton  <nickc@cygnus.com>
+
+	* tracepoint.c (set_raw_tracepoint): Cope with symbols that do not
+	have an associated directory.
+
+Mon Jul 13 15:21:04 1998  Mark Alexander  <marka@cygnus.com>
+
+	* utils.c (puts_debug): Display non-printable characters in hex
+	instead of octal.
+
+Thu Jul  9 16:16:47 1998  Jeffrey A Law  (law@cygnus.com)
+
+	* mn10300-tdep.c (mn10300_generic_register_names): New variable.
+	(set_machine_hook): New function.  Copy the appropriate register
+	names into reg_names.
+	(_initialize_mn10300_tdep): Set up to call set_machine_hook.
+	* tm-mn10300 (NUM_REGS): Bump to 32.
+	(REGISTER_NAMES): Updated accordingly.
+
+
+Tue Jul 7 7:40:13 1998  Ron Unrau  <runrau@cygnus.com>
+
+	* symtab.c (find_pc_sect_psymbol): allow case where textlow is 0
+
+Thu Jul  2 15:57:58 1998  Frank Ch. Eigler  <fche@cygnus.com>
+
+	* breakpoint.c (resolve_sal_pc): Accept absence of innermost
+	Lexical block for breakpoint resolution.
+
+Thu Jul 2 10:22:00 1998  Dawn Perchik  <dawn@cygnus.com>
+
+	* mdebugread.c (parse_partial_symbols): Go ahead and read the .mdebug
+	section, but just don't add a 2nd minimal symbol if this is an .mdebug 
+	section in an ELF file.
+
+1998-07-01  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	* Makefile.in (ax-general.o): Depend on $(defs_h) too.
+	(ax_h): Bother to define this.
+
+Mon Jun 29 19:01:18 1998  Jim Wilson  <wilson@cygnus.com>
+
+        * gnu-regex.c (re_comp): Add cast to char * before gettext calls.
+
+Sun Jun 28 11:35:48 1998  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>
+
+	Improve support for SunPro F77.
+	* dbxread.c (end_psymtab, process_one_symbol):  Handle minimal
+	symbols with trailing underscore names.
+	* minsyms.c (find_stab_function_addr):  Ditto.
+	* dbxread.c (process_one_symbol):  Ignore N_ALIAS for now.
+	* partial-stab.h (case N_ALIAS):  Ditto.
+	* stabsread.c (read_sun_builtin_type):  Handle boolean types.
+
+Fri Jun 26 14:03:01 1998  Keith Seitz  <keiths@cygnus.com>
+
+	* symtab.h (enum namespace): Add new namespaces FUNCTIONS_NAMESPACE,
+	TYPES_NAMESPACE, METHODS_NAMESPACE, and VARIABLES_NAMESPACE used by
+	new search_symbols.
+	Add prototype for search_symbols and free_search_symbols.
+
+	* symtab.c (list_symbols): Rewrite to use new search_symbols.
+	(file_matches): New helper function for search_symbols.
+	(free_search_symbols): New function which frees data returned from
+	search_symbols.
+	(print_symbol_info): New helper function which prints info about a
+	matched symbol to stdout. Extracted from old list_symbols.
+	(print_msymbol_info): New helper function which prints info about
+	a matched msymbol to stdout. Extracted from old list_symbols.
+	(symtab_symbol_info): Extracted from old list_symbols.
+	(variables_info): Use symtab_symbol_info.
+	(functions_info): Use symtab_symbol_info.
+	(types_info): Use symtab_symbol_info.
+	(rbreak_command): Rewrite to use new search_symbols.
+
+Thu Jun 25 22:38:32 1998  Frank Ch. Eigler  <fche@cygnus.com>
+
+	* mips-tdep.c (mips_push_arguments): Use 128-bit stack frame
+	alignment for inferior calls.
+
+Wed Jun 24 23:17:12 1998  Mark Alexander  <marka@cygnus.com>
+
+	* mn10200-tdep.c (mn10200_analyze_prologue): Fix calculation
+	of jsr target address.
+
+Tue Jun 23 19:37:46 1998  Mark Alexander  <marka@cygnus.com>
+
+	* config/mn10200/tm-mn10200.h (SAVED_PC_AFTER_CALL):  Don't
+	zero upper byte of address.
+
+Tue Jun 23 17:32:26 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* rs6000-tdep.c (pop_dummy_frame): use memcpy. 
+	(push_arguments): use memset.
+	(various other places): fix up indentation and long lines.
+
+Tue Jun 23 11:58:35 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* configure.in: s/lXext/-lXext/ for Jillian's change.
+
+Tue Jun 23 11:14:04 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* source.c (find_source_lines): fix indentation.
+
+	* config/mips/tm-irix5.h: Modify to work better on irix 6, by
+	making FP registers 8 bytes instead of 4.
+	REGISTER_BYTES: redefine.  REGISTER_BYTE(): redefine.
+	REGISTER_VIRTUAL_TYPE: redefine.  MIPS_LAST_ARG_REGNUM: redefine.
+	* irix5-nat.c (fetch_core_registers): read 8 bytes per FP register.
+	* mips-tdep.c (FP_REGISTER_DOUBLE): new macro to distinguish 
+	targets with 8-byte FP registers (don't use TARGET_MIPS64).
+	(STACK_ARGSIZE): new macro, how much space is taken up on the
+	stack for each function argument (don't use TARGET_MIPS64).
+	(mips_push_arguments): modify logic to work better on Irix 6
+	(n32 ABI).
+
+Tue Jun 23 12:29:53 1998  Jillian Ye  <jillian@cygnus.com>
+
+        * configure.in: Add -lXext to mips_extra_libs
+	* configure: Regenerated.
+   
+Sun Jun 21 09:31:12 1998  Ron Unrau  (runrau@cygnus.com)
+
+	* symtab.c (find_line_pc): assumed that a PC of 0 is illegal.
+  	Changed to pass PC as arg and return 1 if valid (0 otherwise).
+	* symtab.h: Change prototype to match.
+	* symtab.c (find_line_pc_range): Use new interface.
+	* breakpoint.c (resolve_sal_pc): Ditto.
+
+Wed Jun 17 15:50:00 1998  Ron Unrau  (runrau@cygnus.com)
+
+	* parse.c (target_map_name_to_register): Check target specific 
+	  aliases *first* so that it can over-ride architectural names
+
+Wed Jun 17 17:13:38 1998  Said Ziouani  (saidz@park-street.cygnus.com)
+
+	* remote-sds.c (sds_start_remote): Fix printf call.
+
+Tue Jun 16 16:32:08 1998  Mark Alexander  <marka@cygnus.com>
+
+	* mn10200-tdep.c (mn10200_analyze_prologue): Fix null pointer
+	crash when in "start".
+
+Tue Jun 16 14:38:40 1998  Ron Unrau  (runrau@cygnus.com)
+
+	* dbxread.c: reset function_start_offset after a finishing N_FUN 
+	  is seen.
+	* remote-sim.c: allow TARGET_REDEFINE_DEFAULT_OPS to override
+	  target vectors as needed.
+
+Sun Jun 14 08:46:25 1998  Ron Unrau  (runrau@cygnus.com)
+
+	* partial-stab.h: 'F' and 'f' type N_FUN psymbols should pass
+	  CUR_SYMBOL_VALUE as CORE_ADDR instead of long
+	* buildsym.[ch]: export pending_blocks list
+
+Sat Jun 13 13:02:32 1998  Dawn Perchik (dawn@cygnus.com)
+
+	* remote.c: Fix remote help string to match that of help.exp.
+
+Fri Jun 12 14:22:55 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* configure.in (LIBS): Add -lw to the list of libraries if needed.
+
+Thu Jun 11 15:05:10 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* btowc.c: Removed.
+	* configure.in: Don't see if we need to replace btowc().
+	* Makefile.in: Don't include LIBOBJS.
+	* configure: Regenerated.
+	* gnu-regex.c (regex_compile): Only support i18n [:foo:] if
+	we have btowc().
+
+Wed Jun 10 15:39:14 1998  Stu Grossman  <grossman@babylon-5.cygnus.com>
+
+	* c-exp.y:  Fix problems with parsing "'foo.bar'::func".  
+	Some languages allow symbols with dots.
+
+	* gdbtypes.c (check_stub_method):  Cosmetic.  Use more descriptive
+	names for parameters.
+
+	* jv-exp.y:  Parser now accepts primitive types.
+	* (parse_number):  Use correct ifdef for scanf long double support.
+	* jv-lang.c (java_array_type):  Initial cut at array support.
+
+	* language.c language.h (set_language):  Now returns previous language.
+
+	* symtab.c (find_methods):  Make static.  Cosmetic changes, including
+	indentation, and adding descriptive comments.  Move local variable 
+	defs into the block they are used in.
+	* Don't call check_stub_method any more.  Use gdb_mangle_name to
+	generate the full method name.  find_method doesn't need all the other
+	goobldegook that check_stub_method does.
+	* (gdb_mangle_name):  Use more descriptive names for parameters.  Fix
+	comment.
+	* (lookup_partial_symbol lookup_block_symbol):  Check for java to
+	ensure we can find mangled names.
+	* (decode_line_1):  Move local variable defs into the block they are
+	used in.  (Improves code readability.)
+
+Wed Jun 10 18:04:35 1998  Frank Ch. Eigler  <fche@cygnus.com>
+ 
+	* gdbtypes.c (get_discrete_bounds): Assign unsigned type flag for
+	all-positive enum.
+	(create_set_type): Ditto for all-positive set values.
+	* values.c (unpack_field_as_long): Check for typedef in struct
+	field unpacking.
+
+Wed Jun 10 14:06:05 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* configure.in: Add some tests for gnu-regex.c's benefit.
+	See if btowc() function is provided in C library.
+	* configure, config.in: Regenerated.
+	* Makefile.in (CLIBS, CDEPS): Add @LIBOBJS@ to build btowc.c
+	if necessary.
+	* btowc.c: New file.
+
+	* gnu-regex.c: Reorder wchar.h and wctype.h includes for Solaris'
+	benefit.
+	Drop namespace preserving defines for now.
+
+Wed Jun 10 11:53:42 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* gnu-regex.c: Include "gnu-regex.h", not "regex.h".
+
+Wed Jun 10 11:34:07 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* gnu-regex.c, gnu-regex.h: Change LGPL license to GPL license
+	to stay consistent with the rest of GDB.
+
+Wed Jun 10 11:27:39 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* gnu-regex.c, gnu-regex.h: Update to current FSF (glibc) versions.
+
+Wed Jun 10 10:58:18 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* printcmd.c (disassemble_command): move overlay mapping code
+	"up" into find_pc_partial_function.
+	* blockframe.c (find_pc_partial_function): adjust start address
+	and end address for overlays (mapped vs. unmapped addresses),
+	so that all callers of this function may benefit.
+	* m32r-tdep.c (m32r_skip_prologue): adjust indentation.
+
+Mon Jun  8 16:08:10 1998  Ron Unrau  <runrau@cygnus.com>
+
+	* objfiles.c (add_to_objfile_sections): All targets to define
+	  TARGET_KEEP_SECTION to permit them to retain bfd sections that
+	  GDB would otherwise have discarded.
+
+Fri Jun  5 13:56:19 1998  Doug Evans  <devans@canuck.cygnus.com>
+
+	* dbxread.c (read_dbx_symtab): Don't lower texthigh for last psymtab.
+
+Thu Jun  4 18:35:04 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* remote.c (init_extended_remote_ops): Make extended_remote_ops
+	by copying from remote_ops, move it and init_remote_ops to
+	usual place at end of file, remove "void" from arg lists.
+
+Thu Jun  4 17:51:06 1998  Mark Alexander  <marka@cygnus.com>
+
+	* sparc-tdep.c (sparc_fix_call_dummy): Byte-swap the call dummy
+	on bi-endian machines.
+	(sparc_extract_return_value): Handle values smaller than int on
+	machines with little-endian data.
+	(sparc_target_architecture_hook): Set bi_endian flag.
+
+Thu Jun  4 12:14:48 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* printcmd.c (disassemble_command): Fix off-by-one error for
+	disassembling functions in unmapped overlay sections.
+
+Thu Jun  4 10:15:03 1998  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
+
+	* remote.c: merged.
+
+        - Jim Blandy  <jimb@zwingli.cygnus.com>
+	(print_packet, remote_packet_command): New functions.
+        (_initialize_remote): Register the remote-packet command.
+        - David Taylor  <taylor@texas.cygnus.com> 
+        (_initialize_remote): remote-compare is now
+        compare-sections.
+        - Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
+         (remote_compare_command): added warning, issued in case
+        of mismatch only.
+
+Thu Jun  4 08:25:38 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* remote.c (remote_compare_command): New function, new command.
+	Compare object file binary image with corresponding memory on
+	remote target.  Report differences.
+
+Tue Jun  2 19:05:04 1998  Mark Alexander  <marka@cygnus.com>
+
+	* sparc-tdep.c (sparc_target_architecture_hook): Set target
+	byte order only when it's selectable.
+
+Tue Jun  2 02:01:56 1998  Mark Alexander  <marka@cygnus.com>
+
+	* sparc-tdep.c (sparc_target_architecture_hook): New function to
+	set endianness based on machine type.
+	(_initialize_sparc_tdep): Initialize target_architecture_hook.
+	(sparc_print_register_hook): Print PSR and FPSR in fancy format
+	on 32-bit machines.
+	* config/sparc/tm-sparc.h (PRINT_REGISTER_HOOK): Redefine to
+	call sparc_print_register_hook instead of using inline code.
+	* config/sparc/tm-sp64.h (PRINT_REGISTER_HOOK): Remove.
+
+Thu May 28 17:19:14 1998  Keith Seitz  <keiths@cygnus.com>
+
+	* main.c (main): Check for NULL from getenv on CYGWIN32.
+
+Thu May 28 09:41:44 1998  Nick Clifton  <nickc@cygnus.com>
+
+	* monitor.c (monitor_vsprintf): Handle %%.  Patch courtesy of
+	Felix Lee (flee@cygnus.com)
+
+Thu May 28 00:27:35 1998  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>
+
+	* mips-tdep.c (mips_push_dummy_frame):  Fix calculation of
+	PROC_REG_OFFSET and PROC_FREG_OFFSET.
+
+Mon Apr 27 14:37:49 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* config/v850/tm-v850.h (REGISTER_BYTE): FP_REGNUM and
+ 	FP_RAW_REGNUM use the same register location.
+
+	* v850-tdep.c (v850_scan_prologue): Use FP_RAW_REGNUM instead of
+ 	FP_REGNUM.
+	(v850_frame_chain): Ditto.
+
+	* config/v850/tm-v850.h (REGISTER_NAMES): Add "fp".
+	(NUM_REGS): Update.
+	(FP_REGNUM): Update.
+	(FP_RAW_REGNUM): Define.
+
+Wed May 27 14:22:31 1998  Keith Seitz  <keiths@cygnus.com>
+
+	* main.c (main): Convert the path returned from getenv to a posix
+	path on cygwin32 hosts.
+
+Mon May 25 13:31:27 1998  Keith Seitz  <keiths@cygnus.com>
+
+	* remote.c (remote_open_1): If an error occurs starting the remote, 
+	pop the target AND return.
+
+Sat May 23 02:23:09 1998  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>
+
+	* dwarf2read.c (read_subroutine_type):  Set TYPE_FLAG_PROTOTYPED
+	on C++ functions.
+	* valops.c (value_arg_coerce):  Add new argument to indicate whether
+	the function has a prototype, handle integer and float promotions
+	accordingly.
+        (call_function_by_hand):  Always call value_arg_coerce, pass down
+	prototype information.
+
+Fri May 22 10:56:36 1998  John Metzler  <jmetzler@cygnus.com>
+
+	* remote.c (_initialize_remote): Typo extended__remote
+
+Thu May 21 13:14:25 1998  John Metzler  <jmetzler@cygnus.com>
+
+	* gnu-nat.c (init_gnu_ops): Initialization of target ops by assignment.
+	(_initialize_gnu_nat): Call new init
+	* mac-nat.c (init_child_ops): Ditto.
+	(_initialize_mac_nat): Ditto.
+	* monitor.c (init_base_monitor_ops): Ditto.
+	(_initialize_remote_monitors): Ditto.
+	* ppc-bdm.c (init_bdm_ppc_ops): Ditto.
+	(_initialize_bdm_ppc): Ditto.
+	* remote-adapt.c (init_adapt_ops): Ditto.
+	(_initialize_remote_adapt): Ditto.
+	* remote-array.c (init_array_ops): Ditto.
+	(_initialize_array): Ditto.
+	* remote-bug (init_bug_ops): Ditto.
+	(_initialize_remote_bug): Ditto.
+	* remote-e7000.c (init_e7000_ops): Ditto.
+	(_initialize_remote_e7000): Ditto.
+	* remote-eb.c (init_eb_ops): Ditto.
+	(_initialize_remote_eb): Ditto.
+	* remote-es.c (init_es1800_ops): Ditto.
+	(init_es1800_child_ops): Ditto.
+	(_initialize_es1800): Ditto.
+	* remote-hms.c (init_hms_ops): Ditto.
+	(_initialize_remote_hms): Ditto.
+	* remote-mm.c (init_mm_ops): Ditto.
+	(_initialize_remote_mm): Ditto.
+	* remote-nindy.c (init_nindy_ops): Ditto.
+	(_initialize_nindy): Ditto.
+	* remote_nrom.c (init_nrom_ops): Ditto.
+	(_initialize_remote_nrom): Ditto.
+	* remote-os9k (init_rombug_ops): Ditto.
+	(_initialize_remote_os9k): Ditto.
+	* remote-rdi.c (init_rdi_ops): Ditto.
+	(_initialize_remote_rdi): Ditto.
+	* remote-rdp.c (init_remote_rdp_ops): Ditto.
+	(_initialize_remote_rdp): Ditto.
+	* remote-sds.c (init_sds_ops): Ditto.
+	(_initialize_remote_sds): Ditto.
+	* remote-sim.c (init_gdbsim_ops): Ditto.
+	(_initialize_remote_sim): Ditto.
+	* remote-st.c (init_st2000_ops): Ditto.
+	(_initialize_remote_st2000): Ditto.
+	* remote-udi.c (init_udi_ops): Ditto.
+	(_initialize_remote_udi): Ditto.
+	* remote-vx.c (init_vx_ops): Ditto.
+	(init_vx_run_ops): Ditto.
+	(_initialize_vx): Ditto.
+	* remote.c (init_remote_ops): Ditto.
+	(init_extended_remote_ops): Ditto.
+	(_initialize_remote): Ditto.
+	* sparcl-tdep.c (init_sparclite_ops): Ditto.
+	(_initialize_sparcl_tdep): Ditto.
+	* v850ice.c (init_850ice_ops): Ditto.
+	(_initialize_v850ice): Ditto.
+	* win32-nat.c (init_child_ops): Ditto.
+	(_initialize_inftarg): Ditto.
+
+1998-05-21  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	* ax-gdb.c (const_var_ref): Don't handle function names.  I don't
+	want to implement all the "usual unary conversion" rules for
+	constants.
+	(gen_usual_unary): Turn "function" values into "pointer to
+	function" values, in accordance with ANSI.
+	(gen_deref): Don't do the usual unary conversions here.  Let the
+	caller do it.  Note that dereferencing a function pointer yields
+	a function designator, which we call an rvalue, not an lvalue.
+	(gen_address_of): Handle functions specially.
+	(gen_struct_ref): Perform the usual unary conversions before
+	calling gen_deref.
+	(gen_expr): In case for the prefix '*' operator, call
+	gen_usual_unary manually.
+
+Wed May 20 15:29:41 1998  Gavin Koch  <gavin@cygnus.com>
+
+	* mips/tm-tx39.h (MIPS_DEFAULT_FPU_TYPE): Defined as MIPS_FPU_NONE.
+	* mips/tm-tx39l.h: Same.
+
+Wed May 20 10:12:11 1998  John Metzler  <jmetzler@cygnus.com>
+
+	* m32r-tdep.c (decode_prologue): Handle frames compiled with -Os.
+        Split out as separate function called by skip prologue and scan
+        prologue. new formula handles optimization in which the prologue
+        is interleaved with the body of the function. Also recognizes new
+        variations of prologue encoding.  Use of frame pointer is
+        essential to debugging, -fno-omit-frame-pointer
+        (m32r_skip_prologue): Call decode prologue, ignore line info
+        (m32r_scan_prologue): Call decode prologue, ignore line info.
+
+Tue May 19 17:23:54 1998  John Metzler  <jmetzler@cygnus.com>
+
+	* w89k-rom.c (_initialize_w89k): Call new init function
+	(init_w89k_cmds): Convert to dynamic initialization of monitor_ops 
+        data structure for forward compatability with additions to the
+        data structure.
+	* dbug-rom.c (_initialize_dbug_rom): ditto
+        (init_dbug_cmds): ditto
+	* m32r-rom.c (_initialize_m32r_rom): ditto
+	(init_m32r_cmds): ditto
+
+Tue May 19 14:54:11 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* tracepoint.c (memrange_cmp): use const void * args to avoid
+	ANSI compiler warnings.
+
+1998-05-19  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	* ax-gdb.c (gen_fetch, gen_var_ref, gen_deref, find_field,
+	gen_bitfield_ref, gen_expr): Call error, not abort.
+	* ax-general.c (read_const, generic_ext, ax_trace_quick,
+ 	ax_label, ax_const_d, ax_reg, ax_print): Same.
+
+	* tracepoint.c: Remove the $(...) syntax for memranges.
+	(validate_actionline, encode_actions, trace_dump_command): Remove
+	clauses for the $(...) syntax.
+	(parse_and_eval_memrange): Function deleted.
+	(_initialize_tracepoint): Update function description. 
+
+	* ax-gdb.c (_initialize_ax_gdb): Make the "agent" command a
+ 	subcommand of "maintenance", as it should have been from the
+	beginning.  #include "gdbcmd.h", to get the declaration for
+	maintenancelist.
+	* Makefile.in: Document that dependency.
+
+Tue May 19 12:00:58 1998  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
+
+	* tracepoint.c (get_tracepoint_by_number): new function, to access
+	traceframe_number for use of the GUI.
+
+	* tracepoint.h: added prototype for get_traceframe_number.
+
+Mon May 18 13:34:27 1998  Keith Seitz  <keiths@cygnus.com>
+
+        * dbxread.c (process_one_symbol): If block addresses are relative to
+        function start addresses, reset function_start_address whenever a new
+        source file is seen.
+
+Mon May 18 13:04:27 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* tracepoint.c (get_tracepoint_by_number): make sure to advance
+	arg pointer even if we fail to parse a useful number.  Otherwise,
+	since this function is called in a loop, it may loop forever!
+	Also change strtol call to allow arbitrary radix.
+	(map_args_over_tracepoints (and other places)): add QUIT; call
+	to loop, to allow breakout using control-C.  Not all loops were
+	analyzed to make sure they could terminate cleanly, but even
+	terminating with a messed-up tracepoint list would be better 
+	than not terminating at all!
+	(tdump_command): check to see if we're connected to a trace-
+	capable target (currently only "remote") before doing anything 
+	else.
+
+Sat May 16 22:21:48 1998  Frank Ch. Eigler  <fche@cygnus.com>
+
+	* config/d30v/tm-d30v.h (INIT_FRAME_PC_FIRST): Fill in PC into
+ 	frame struct before extracting saved register offsets.
+
+Fri May 15 22:47:45 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* tracepoint.c (encode_actions): fix typo in printf format string.
+
+1998-05-15  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	Implement a few more tracing operators: ^ | & ~ !
+	* ax-gdb.c (gen_integral_promotions, gen_logical_not,
+	gen_complement): New functions.
+	(gen_binop): New argument MAY_CARRY, indicating whether we need to
+	correct the upper bits of the value after performing the
+	operation.  Callers changed.
+	(gen_expr): Handle BINOP_BITWISE_AND, BINOP_BITWISE_IOR, and
+	BINOP_BITWISE_XOR here as well, by calling gen_binop.  Handle
+	UNOP_LOGICAL_NOT, UNOP_COMPLEMENT.
+
+	* ax-gdb.c (gen_conversion): Reworked to avoid some unnecessary
+	sign extension.
+
+	* ax-gdb.c (gen_usual_arithmetic): Renamed from gen_usual_binary,
+	to match the ANSI C standard better.  Callers changed.
+
+	* ax-gdb.c (gen_traced_pop): Add prototyped declaration.
+
+Fri May 15 18:18:38 1998  David Taylor  <taylor@texas.cygnus.com>
+
+	* tracepoint.c (stringify_collections_list): return a collection
+	of strings rather than a single string.
+	(free_actions_list): new function.
+	(encode_actions): process collection of strings returned by
+	stringify_collections_list.
+
+1998-05-15  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	* ax-gdb.c (gen_traced_pop): New function.
+	(gen_expr): Call it for comma operator.
+	(gen_trace_for_expr): Call it, instead of writing it out.
+
+	Add facilities for sending arbitrary packets to the remote agent.
+	There are a bunch of improvements to make (make it generic; handle
+	'O' replies properly), but I just want to get this onto the branch.
+	* remote.c (print_packet, remote_packet_command): New functions.
+	(_initialize_remote): Register the remote-packet command.
+
+Thu May 14 17:52:31 1998  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
+
+	* tracepoint.c: move actionline_type definition to tracepoint.h.
+	(validate_actionline): make non static.
+
+	* tracepoint.h: move actioline_type definition  from tracepoint.c.
+        (validate_actionline) moved prototype from tracepoint.c.
+
+Thu May 14 11:49:18 1998  David Taylor  <taylor@texas.cygnus.com>
+
+	* tracepoint.c (validate_actionline): add additional error
+	checking, remove some dead code.
+	(encode_actions): additional cleanups.
+	(trace_find_command): remove some dead code.
+	(trace_find_pc_command): ditto.
+	(trace_find_tracepoint_command): ditto.
+	(trace_find_line_command): ditto.
+	(trace_find_range_command): ditto.
+	(trace_find_outside_command): ditto.
+
+Thu May 14 5:51:00 1998  Ron Unrau  <runrau@cygnus.com>
+
+	* symtab.c (decode_line_1): set section for "break *<addr>"
+
+Wed May 13 20:58:02 1998  Mark Alexander  <marka@cygnus.com>
+
+	* corefile.c (reopen_exec_file): Reopen the exec file if
+	it has changed.
+
+Wed May 13 15:22:02 1998  Mark Alexander  <marka@cygnus.com>
+
+	* sparc-tdep.c (fetch_instruction): New function.
+	(single_step, sparc_init_extra_frame_info, examine_prologue):
+	Use fetch_instruction instead of read_memory_integer
+	to ensure that instructions are always read as big-endian.
+
+Wed May 13 14:42:21 1998  Ian Lance Taylor  <ian@cygnus.com>
+
+	* configure.in: Add AC_FUNC_ALLOCA.
+	* defs.h: Check HAVE_ALLOCA_H rather than sparc.  Add _AIX pragma
+	alloca.
+	* configure: Rebuild.
+	* Makefile.in (jv-lang.o, jv-typeprint.o, jv-valprint.o): New
+	targets.
+
+Wed May 13 11:19:08 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* tracepoint.c (trace_command): Remove old diagnostic code that was
+	preventing tracepoints from being defined with a full-path filename.
+
+Tue May 12 13:17:35 1998  Frank Ch. Eigler  <fche@cygnus.com>
+
+	* stabsread.c (read_one_struct_field): Check for typedef in type
+ 	tree before clearing bitfield information.
+
+1998-05-11  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	* ax-gdb.c (gen_binop): New function, based on gen_mul, to replace
+	gen_mul and gen_div, and handle `%' op as well.  Correctly tests
+	type of arguments.
+	(gen_expr): Factor out common code in binary arithmetic operators.
+	Add support for `%'.
+	(gen_mul, gen_div): Removed.
+
+Thu May  7 14:49:38 1998  Bob Manson  <manson@charmed.cygnus.com>
+
+	* config/sparc/tm-sp64.h (CALL_DUMMY): Store and retrieve
+	%o0-%o5 as 64-bit values; compensate for stack bias.
+	(USE_STRUCT_CONVENTION): We only pass pointers to structs
+	if they're larger than 32 bytes.
+	(REG_STRUCT_HAS_ADDR): Ditto.
+
+	* sparc-tdep.c (sparc_init_extra_frame_info): Use read_sp()
+ 	instead of read_register. If the target is a sparc64 and the frame
+ 	pointer is odd, compensate for the stack bias.
+	(get_saved_register): Use read_sp().
+	(DUMMY_STACK_REG_BUF_SIZE): Use FP_REGISTER_BYTES.
+	(sparc_push_dummy_frame): Use read_sp()/write_sp(). On sparc64,
+ 	save the PC, NPC, CCR, FSR, FPRS, Y and ASI registers.
+	(sparc_frame_find_saved_regs): Use read_sp(). Read the PC, NPC,
+ 	CCR, FSR, FPRS, Y and ASI registers from the frame, if it's a
+ 	dummy frame.
+	(sparc_pop_frame): Use write_sp(). If the target is a sparc64 and
+ 	the FP is odd, compensate for stack bias.
+	(sparc_store_return_value): Right-justify the return value before
+ 	writing it to %o0.
+	(sparc_fix_call_dummy): Don't NOP out part of the call dummy on
+ 	sparc64.
+	(sparc64_read_sp, sparc64_read_fp, sparc64_write_sp,
+ 	sparc64_write_fp, sp64_push_arguments,
+ 	sparc64_extract_return_value): New functions to support the
+ 	sparc64 ABI.
+
+	* dwarfread.c (handle_producer): Set processing_gcc_compilation to
+ 	the right version number.
+
+	* dwarf2read.c (read_file_scope): Assume we're processing
+	GCC2 output.
+
+Wed May  6 16:34:03 1998  Jeffrey A Law  (law@cygnus.com)
+
+	* somsolib.c: Include gdb_stat.h.
+
+Mon May  4 18:34:01 1998  David Taylor  <taylor@texas.cygnus.com>
+
+	* ax-gdb.c (gen_mul): new function; (gen_div): new function;
+	(gen_expr): add support for * and / operators, call gen_mul and
+	gen_div as appropriate.
+
+Mon May  4 16:24:22 1998  Mark Alexander  <marka@cygnus.com>
+
+	* defs.h (make_run_cleanup): Declare.
+	* solib.c (find_solib): Pass correct number of arguments to
+	make_run_cleanup.
+
+Mon May  4 07:08:25 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* tracepoint.c (trace_actions_command): actions command must set
+	step_count to zero (in case previous actions have set it but the
+	new set does not).
+
+Sat May  2 09:35:07 1998  Stu Grossman  <grossman@babylon-5.cygnus.com>
+
+	* ocd.h:  Add new flags, function codes, and processor types to 
+	support new Wiggler capabilities.
+	* (ocd_write_bytes_size):  New function to allow atomic writes of
+ 	memory in sizes larger than a byte.
+
+	* ser-unix.c (baudtab):  Add 57600, 115200, 230400, and 460800 baud.
+
+Fri May  1 19:51:32 1998  Frank Ch. Eigler  <fche@cygnus.com>
+
+	* stabsread.c (read_one_struct_field): Do not override supplied
+ 	bitfield size for a range type value.
+
+	* gdbtypes.c (create_range_type): For a range with positive 
+	lower limit, declare range type as unsigned.
+
+Fri May  1 10:58:34 1998  John Metzler  <jmetzler@cygnus.com>
+
+	* monitor.c: Turn off debug
+
+Fri May  1 09:29:56 1998  Peter Schauer  <pes@regent.e-technik.tu-muenchen.de>
+
+	* breakpoint.c (delete_command):  Skip internal breakpoints when
+	all breakpoints are requested.
+
+	* stabsread.c (define_symbol):  Record parameter types from Sunpro
+	function stabs in the TYPE_FIELDS of the function type.
+
+Thu Apr 30 15:59:54 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* Makefile.in (config-check-targets, config-check-hosts): Removed.
+
+1998-04-30  Paul Eggert  <eggert@twinsun.com>
+
+        * Makefile.in (maintainer-clean):
+        Don't get ahead of yourself and delete Makefile
+        before running `make'.
+        (local-maintainer-clean, do-maintainer-clean): New rules.
+
+Wed Apr 29 14:02:59 1998  David Taylor  <taylor@texas.cygnus.com>
+
+	* ax-gdb.c (gen_add): when adding a pointer and an int, use
+	the size of the pointer, not the int (typo) to decide how
+	to extend the result.
+
+Wed Apr 29 10:20:40 1998  John Metzler  <jmetzler@cygnus.com>
+
+	* monitor.h: Defined additional hooks for dmpregs, configure_hooks
+	and wait_filter. These additions require that all ROM monitor
+	interfaces be recoded to initialize monitor ops using assignments
+	rather than static structure initialization.  Added new bits to
+	flags MO_EXACT_DUMPADDR, MO_HAS_BLOCKWRITES.
+
+        * monitor.c (RDEBUG): Conditional tracing throughout the file.
+        (fromhex): Now recognized upper cse hex digits
+        (monitor_printf_noecho):
+        (monitor_readchar): Tracing interferes with input timing.
+        (monitor_open): Register different memory write functions with
+        dcache_init if MO_HAS_BLOCKWRITES.
+        (flush_monior_dcache): Added as an additional utilty.
+        (monitor-resume): Call continue hook if one has been supplied.
+        (monitor_wait_filter): New function Factored out of monitor wait
+        and used if alternate wait-filter has not been provided.
+        (monitor_wait): call alternate wait filter if provided.  Call
+        monitor_dump_regs, a new function factored out from inline code.
+        (monitor_dump_block): A new function used as a utility when
+        monitors must dump several blocks of registers using different
+        commands.
+        (monitor_dump_regs): Call alternate function if provided. Uses new
+        hook in monitor.h.
+        (monitor_write_memory): Engage previouly added hook
+        MO_FILL_USES_ADDR.
+        (monitor_write_even_block): new function supports writing long
+        blocks of 4byte words.
+        (longlongendswap): new internal function
+        (monitor_write_memory_longlongs): new function writes large blocks
+        using command to enter a long long.
+        (monitor_write-memory_block): new Function figures out which block
+        mod to use.
+        (monitor_read_memory): Can now handle dump formats in which the bytes 
+        preceeding the requested data is not printed.
+
+Tue Apr 28 19:41:33 1998  Tom Tromey  <tromey@cygnus.com>
+
+	* tracepoint.c (memrange_cmp): Another typo fix; `memrbnge' ->
+	`memrange'.
+
+	* tracepoint.c (memrange_cmp): Fixed typo in function intro.
+
+Tue Apr 28 17:41:20 1998  Philippe De Muyter  <phdm@macqel.be>
+
+        * symfile.c (overlay_auto_command): Add forgotten parameter
+ 	definitions.
+        (overlay_manual_command, overlay_off_command): Likewise.
+        (overlay_load_command): Likewise.
+        * tracepoint.c (memrange_cmp): Parameters have type void *, not
+        struct memrange *.
+
+Tue Apr 28 11:08:25 1998  John Metzler  <jmetzler@cygnus.com>
+
+	* rom68k-rom.c (_initialize_rom68k): Fix unresolved init_rom_68kcmds.
+
+Mon Apr 27 14:32:21 1998  Mark Alexander  <marka@cygnus.com>
+
+	* config/sparc/tm-sparc.h (CALL_DUMMY): Shorten it drastically,
+	make it work on the simulator.
+	(FIX_CALL_DUMMY): Convert to function call instead of inline code.
+	(sparc_fix_call_dummy): Declare.
+	* sparc-tdep.c (sparc_fix_call_dummy): New function, taken from
+	old FIX_CALL_DUMMY macro, with additional fixes for simulator.
+	(sparc_push_dummy_frame): Set registers differently on simulator
+	to prevent corrupted register window save areas.
+
+Mon Apr 27 13:46:40 1998  John Metzler  <jmetzler@cygnus.com>
+
+        * rom68k-rom.c (_initialize_rom68k, init_rom68k_cmds):
+        Convert all static initializations of monitor ops structures to
+        executable initializations in order that additions to the data
+        structure definition can me made without repeating this editing
+        exercise.                                            
+        * abug-rom.c (_initialize_abug_rom, init_abug-cmds): Ditto.
+        * cpu32bug-rom.c (_initialize_cpu32bug_rom, init_cpu32bug_cmds): Ditto.
+        * mon960-rom.c (initialize_mon960, init_mon960_cmds): Ditto.
+        * op50-rom.c (initialize_op50n, init_op50n_cmds): Ditto.       
+        * ppcbug-rom.c (_initialize_ppcbug_rom, init_ppc_cmds): Ditto.
+        * sh3-rom.c (_initialize_sh3_rom, init_sh3_cmds): Ditto.
+        * sparclet-rom.c (_initialize_sparclet, init_sparclet_cmds): Ditto.
+        * remote-est.c (_initialize_est, init_est_cmds): Ditto.
+        * remote-hms.c ( _initialize_remote_hms, init_hms_cmds): Ditto.
+
+Mon Apr 27 10:43:04 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+        * gdb_string.h (strdup): Don't specify arguments in prototype.
+
+Sun Apr 26 07:57:21 1998  Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
+
+	* rs6000-nat.c (vmap_ldinfo):  Issue warning instead of error if
+	fstat on ldinfo_fd fails.  Use objfile->obfd instead of vp->bfd
+	to check for reference to the same file.
+
+	* target.c (target_read_string):  Handle string transfers at the
+	end of a memory section gracefully.
+
+Fri Apr 24 17:18:56 1998  Geoffrey Noer  <noer@cygnus.com>
+
+	* Makefile.in: enable EXEEXT setting
+
+Fri Apr 24 11:53:49 1998  David Taylor  <taylor@texas.cygnus.com>
+
+	* tracepoint.c (add_local_symbols): change type of type from
+	char to int so that type shows up as 'A' or 'L' not 0.
+
+Thu Apr 23 16:37:20 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+        * README:  Minor changes for 4.17 release.
+
+Thu Apr 23 15:44:39 1998  Per Bothner  <bothner@cygnus.com>
+
+	* symfile.c (deduce_language_from_filename):  .class implies java.
+
+Thu Apr 23 12:52:21 1998  Philippe De Muyter  <phdm@macqel.be>
+
+        * configure.in (strerror): Check if function must be declared.
+        * acconfig.h (NEED_DECLARATION_STRERROR): New define slot.
+        * gdb_string.h (strerror): Function declaration issued if
+        NEED_DECLARATION_STRERROR.
+        * configure, config.in: Files regenerated.
+
+Thu Apr 23 12:27:43 1998  Philippe De Muyter  <phdm@macqel.be>
+
+        * symfile.c (simple_overlay_update_1): Do not prefix array address
+        by `&'.
+        * bcache.h (BCACHE_DATA_ALIGNMENT): Ditto.
+        * tracepoint.c (encode_actions): Ditto.
+        * language.c, complaints.c, utils.c (varargs.h): Do not include that
+        file here, it is already included indirectly by defs.h.
+        * dbxread.c (dbx_symfile_init, process_one_symbol): Cast xmalloc return
+        value to the appropriate pointer type.
+        * utils.c (floatformat_from_doublest): Ditto.
+        * tracepoint.c (read_actions, _initialize_tracepoint): Ditto.
+        (add_memrange): Likewise with xrealloc return value.
+        * stabsread.c (ref_add): Ditto.
+        * coffread.c (coff_symfile_init): Likewise for xmmalloc return value.
+        * elfread.c (elf_symfile_read): Ditto.
+        * os9kread.c (os9k_symfile_init): Ditto.
+
+Thu Apr 23 00:32:08 1998  Tom Tromey  <tromey@cygnus.com>
+
+	* config.in: Rebuilt.
+	* acconfig.h (ENABLE_NLS, HAVE_CATGETS, HAVE_STPCPY, HAVE_GETTEXT,
+	HAVE_LC_MESSAGES): Define.
+
+Wed Apr 22 15:38:56 1998  Tom Tromey  <tromey@cygnus.com>
+
+	* configure: Rebuilt.
+	* configure.in: Call CY_GNU_GETTEXT.
+	* Makefile.in (top_builddir): New macro.
+	(INTL): Define to @INTLLIBS@.
+	(INTL_DEPS): New macro.
+	(CDEPS): Reference INTL_DEPS, not INTL.
+
+Wed Apr 22 12:58:23 1998 Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	Handle missing shared libraries during the examination of a core
+	dump gracefully.
+	* solib.c (find_solib):  Use catch_errors around call to
+	solib_map_sections. Use warning instead of error if reading of
+	the shared library name fails.
+	(solib_map_sections):  Change return and argument types to make
+	it callable from catch_errors.
+	(symbol_add_stub):  Avoid GDB core dump if solib->abfd is NULL.
+	* irix5-nat.c, osfsolib.c (xfer_link_map_member, solib_map_sections,
+	symbol_add_stub):  Ditto.
+
+Wed Apr 22 14:34:49 1998  Michael Meissner  <meissner@cygnus.com>
+
+	* Makefile.in (INTL*): Add support to link in the intl library,
+	and to add -I options to its source and object directories.
+	(INTERNAL_CFLAGS): Ditto.
+	(C{LIBS,DEPS}): Ditto.
+
+Tue Apr 21 11:20:54 1998  Frank Ch. Eigler  <fche@cygnus.com>
+
+	* mips-tdep.c (gdb_print_insn_mips): Disassemble MIPS instructions
+ 	with subtarget-specific `mach', rather than fixed default.
+	* config/mips/tm-mips.h (TM_PRINT_INSN_MACH): New macro, default
+	disassembly `mach'.
+
+Mon Apr 20 15:35:03 1998  Philippe De Muyter  <phdm@macqel.be>
+
+        * coffread.c (decode_base_type): Treat a long field with size greater
+        than TARGET_LONG_BIT as long long.
+        * values.c (value_from_longest): Print code value in error message.
+
+Mon Apr 20 15:32:21 1998   Mark Kettenis  <kettenis@phys.uva.nl>
+
+        * gdb/gdb_string.h (strdup): Declare only if not defined as a
+        macro.
+
+Mon Apr 20 14:18:45 1998  J. Kean Johnston  <jkj@sco.com>
+
+        * procfs.c: Added replacement macros for LWP stuff.  Fixed support 
+        for UnixWare / SVR4.2MP targets and any targets which use
+        multi-file /proc entries.  Fixed support for hardware watchpoints.
+        * solib.c: SCO needs some of the same code as SunOS. Change
+        preprocessor conditionals.
+
+        * config/i386/i386sco5.mt: New file.
+        * config/i386/tm-i386sco5.h: New file.
+        * config/i386/i386sco5.mh (NATDEPFILES): add i386v-nat.o.
+        * config/i386/nm-i386v42mp.h 
+        (TARGET_HAS_HARDWARE_WATCHPOINTS): define.  
+        Add other macros for hardware assisted watchpoints.
+        * config/i386/nm-i386sco5.h: Correct attributions.
+        (TARGET_HAS_HARDWARE_WATCHPOINTS): define.
+        * config/i386/nm-linux.h (target_remote_watchpoint): Pass
+        'type' through to i386_insert_watchpoint.
+
+Mon Apr 20 14:12:30 1998 Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+	* infrun.c (wait_for_inferior): Don't add signalled processes
+	as new threads.
+	* procfs.c (wait_fd): Note if LWP has exited.
+	(procfs_wait): use GETPID to get process ID.
+
+Sat Apr 18 15:21:04 1998  Stan Cox  <scox@cygnus.com>
+
+	* configure.tgt: Added sparc86x support.
+
+Thu Apr 16 13:13:24 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* rdi-share/etherdrv.c (EthernetWrite): Use strerror to get
+	error string if in an ANSI C-ish environment.
+
+Wed Apr 15 18:59:48 1998  Mark Alexander  <marka@cygnus.com>
+
+	* sparc-tdep.c (SPARC_HAS_FPU): Define.
+	(sparc_extract_return_value): New function, required to handle
+	machines without floating point.
+	(sparc_store_return_value): Ditto.
+	* config/sparc/tm-sparc.h (EXTRACT_RETURN_VALUE): Call
+	sparc_extract_return_value instead of using inline code.
+	(sparc_extract_return_value): Declare.
+	(STORE_RETURN_VALUE): Call sparc_store_return_value instead
+	of using inline code.
+	(sparc_store_return_value): Declare.
+
+Wed Apr 15 12:19:42 1998  Martin M. Hunt  <hunt@cygnus.com>
+
+	* solib.c (enable_break): Only call warning once
+	instead of three times.
+
+Tue Apr 14 16:52:59 1998  Mark Alexander  <marka@cygnus.com>
+
+	* sparc-tdep.c (sparc_extract_struct_value_address): Make it
+	work correctly on little-endian hosts.
+	(sparc_push_arguments): New function.
+	(gdb_print_insn_sparc): New function.
+	(_initialize_sparc_tdep): Make gdb_print_insn_sparc the default
+	disassembler, so that SPARClite-specific instructions will
+	be recognized.
+	* sparcl-tdep.c (readchar): Print debugging information.
+	(debug_serial_write): New function, a replacement for SERIAL_WRITE
+	that prints debugging information.
+	* config/sparc/tm-sparc.h (PUSH_ARGUMENTS): Define.
+	(sparc_push_arguments): Declare.
+
+Tue Apr 14 15:43:49 1998  John Metzler  <jmetzler@cygnus.com>
+
+	* gdbcfgxref (xref_menu): Call new regex and wild card searches
+	Now you can type in a specific triple like mips64-vr4300-elf or
+	somthing like mips*.h
+	(triple_search, wildcardsearch): The new functions
+
+Mon Apr 13 16:28:07 1998  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
+
+	* utils.c (warning): added call to warning_hook
+
+	* source.c (find_source_lines): modified to call warning in case
+	of source vs. executable time stamp mismatch. Simplified object
+	file check. Initialized mtime to 0.
+
+	* defs.h: added warning_hook prototype
+
+	* top.c: added warning_hook prototype.
+
+Mon Apr 13 09:54:08 1998  Keith Seitz  <keiths@andros.cygnus.com>
+
+	* config/sparc/tm-sun4os4.h (IS_STATIC_TRANSFORM_NAME): Add missing
+	definition.
+
+Fri Apr 10 22:36:28 1998  Peter Schauer (pes@regent.e-technik.tu-muenchen.de)
+
+        Update support for x86 Solaris 2.
+        * config/i386/tm-i386sol2.h, nm-i386sol2.h:  New configuration
+        files for x86 Solaris 2.                                              
+        * config/i386/i386sol2.mt, i386sol2.mh:  Use them.                    
+        * config/sparc/tm-sun4sol2.h (PROCFS_GET_CARRY):  New macro, extract  
+        carry flag from a given regset.                                     
+        (IS_STATIC_TRANSFORM_NAME):  New macro, check if a symbol name      
+        is a SunPro transformed name.                                 
+        * i386-tdep.c (sunpro_static_transform_name):  New function to
+        extract the source name from a SunPro transformed name.           
+        * inferior.h (procfs_first_available, procfs_get_pid_fd):        
+        Add prototypes.                                          
+        * infrun.c (wait_for_inferior):  Handle breakpoint hit in
+        signal handler without intervening stop in sigtramp.     
+        * procfs.c (procfs_lwp_creation_handler):  Use PROCFS_GET_CARRY
+        instead of direct access to the status register.               
+        (procfs_get_pid_fd):  New function, returns procfs fd for a given pid.
+        * sol-thread.c (ps_lgetLDT):  New function, returns LDT for a given   
+        lwpid.                                                                
+        (sol_find_new_threads):  Handle failed libthread_db initialization 
+        gracefully.                                                       
+        * stabsread.c (define_symbol):  Use IS_STATIC_TRANSFORM_NAME      
+        to check for a SunPro transformed symbol name.              
+
+Fri Apr 10 10:35:35 1998  John Metzler  <jmetzler@cygnus.com>
+
+	* utils.c (fmthex): A formatting function for hexdumps
+
+	* mips-tdep.c (unpack_mips16): Fixed instruction decoding, lots of
+ 	bit pattern interpretations. mips_fetch_instruction does not work
+ 	for 16 bit instructions. Some confusion remains about sign
+ 	extension in backward branches.
+	(mips32_relative_offset): Sign extension
+	(mips32_next_pc): Major debugging, bit pattern interpretation
+	(print_unpack): debugging printf
+	(fetch_mips_16): new funtion, key on PC low bit, not symbol table
+	(mips16_next_16): Initial major debugging of this function. Lots
+ 	of bit pattern mistakes.
+	(mips_next_pc): key on low bit of PC, not symbol table.
+	* symfile.c (generic_load): Added a download verification which
+ 	reads back the loaded code. Download chunk size is now a defined
+ 	macro. Fixed a bug in which downloading slips into loading one
+ 	byte at a time. Lower level functions in monitor.c can load long
+ 	sequences of bytes and make use of these fixups.  Referencing
+ 	bfd-start_address directly was incorrectly getting zero for start.
+
+Thu Apr  9 19:20:32 1998  Ian Lance Taylor  <ian@cygnus.com>
+
+	* mips-tdep.c (do_fp_register_row): Use alloca rather than arrays
+	with dynamic size.
+
+Wed Apr  8 19:21:42 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* top.c (print_gdb_version): Print 1998 now.
+
+Wed Apr  8 16:57:22 1998  Philippe De Muyter  <phdm@macqel.be>
+
+	* source.c: Remove obsolete decl of strstr().
+
+Wed Apr  8 16:47:33 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* solib.c (solib_create_inferior_hook): Remove Ulrich Drepper's
+	patch of March 23 1998.
+	* breakpoint.c (breakpoint_re_set_one): Remove Ulrich Drepper's
+	patch of March 23 1998.
+
+Sat Apr  4 10:05:00 1998  Dawn Perchik  <dawn@cygnus.com>
+
+	* mdebugread.c (parse_partial_symbols): If this is an .mdebug 
+	section in an ELF file, override a symbol's ECOFF section with its 
+	ELF section.  Also, fix stabs continuation where a stabs string 
+	continues for more than one continuation.
+
+Mon Apr  6 09:17:48 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* mips-tdep.c (mips_push_arguments): Specify dimention of valbuf
+ 	using MAX_REGISTER_RAW_SIZE.
+
+Sat Apr  4 10:05:00 1998  Dawn Perchik  <dawn@cygnus.com>
+
+	* infrun.c: Fix prototype of signals_info to match static funtion.
+
+Thu Apr  2 12:47:41 1998  Frank Ch. Eigler  <fche@cygnus.com>
+
+	* sol-thread.c (sol_thread_store_registers): Save & restore new
+ 	value of single updated register to prevent accidental clobbering.
+
+Wed Apr  1 22:01:09 1998  Mark Alexander  <marka@cygnus.com>
+
+	* config/sparc/tm-sparclite.h (TARGET_BYTE_ORDER_SELECTABLE): Define.
+	* config/sparc/sparclite.mt: Link in the erc32 simulator.
+
+Wed Apr  1 16:30:49 1998  Ian Dall  <Ian.Dall@dsto.defence.gov.au>
+
+        * ns32k-tdep.c (flip_bytes, ns32k_localcount,
+        ns32k_get_enter_addr, sign_extend): Restore functions mysteriously
+        deleted.
+
+        * ns32knbsd-nat.c: New (?) file to support fetching and storing
+        registers on NetBSD hosts.
+
+        * nbsd.mh (NATDEPFILES): put ns32knbsd-nat.o instead of
+        ns32k-nat.o
+
+        * ns32km3-nat.c (reg_offset): Get order of floating point
+        registers correct. Add extra 32382 register offsets.
+        (REG_ADDRESS): define to point at correct part of thread
+        state. Use calls to "warning" instead of "message".
+
+        * tm-nbsd.h, tm-ns32km3.h (REGISTER_NAMES, NUM_REGS,
+        REGISTER_BYTES, REGISTER_BYTE): redefine allowing for 32382
+        fpu registers.
+
+Wed Apr  1 13:43:07 1998  Philippe De Muyter  <phdm@macqel.be>
+
+        * NEWS: m68k-motorola-sysv host support added.
+        * coffread.c (coff_start_symtab): Accept the filename as an argument,
+        set it here.  Callers updated.
+
+Wed Apr  1 23:13:23 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* config/mips/tm-mips.h (REGISTER_VIRTUAL_TYPE): Handle 32 bit SR,
+ 	FSR and FIR registers.
+	(REGISTER_VIRTUAL_SIZE): Compute using REGISTER_VIRTUAL_TYPE.
+	(REGISTER_RAW_SIZE): Define using REGISTER_VIRTUAL_SIZE.
+
+	* config/mips/tm-mips64.h: Ditto.
+
+Tue Mar 31 21:30:39 1998  Nick Clifton  <nickc@cygnus.com>
+
+	* arm-tdep.c (gdb_print_insn_arm): Attach a fake Thumb symbol
+	vector to the info structure when disassembling thumb
+	instructions. 
+
+	* coffread.c (coff_symtab_read, read_one_sym,
+	process_coff_symbol):  Support Thumb symbol types. 
+
+	* dbxread.c (process_one_symbol): Call SMASH_TEXT_ADDRESS (if it
+	is defined) for function symbols.  
+
+Tue Mar 31 16:39:28 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* tracepoint.c (get_tracepoint_by_number): change warning to note.
+	(delete_trace_command): suppress y/n query if no tracepoints, or
+	if not from_tty.  (trace_pass_command): reject junk at end of args.
+	(read_actions): an action list consisting only of "end" is discarded.
+	(validate_actionline (for collect command)): an argument beginning
+	with a dollar_sign but not recognized as a special argument is
+	parsed like any other expression -- if it isn't a register name,
+	it's rejected.  Also reject an empty argument to while-stepping.
+	(trace_find_command): reject a negative frame number argument.
+	(_initialize_tracepoint): set $traceframe initially to -1.
+
+Mon Mar 30 16:42:12 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* rdi-share/Makefile.am, rdi-share/aclocal.m4,
+	rdi-share/configure: New files.
+	* rdi-share/configure.in:  Rewritten to be an autoconf input file.
+	* rdi-share/Makefile.in, rdi-share/configure: Generated by 
+	automake/autoconf.
+	* rdi-share/dbg_hif.h, etherdrv.c, hostchan.c: Use autoconf tests
+	to check environment.
+
+Sun Mar 29 15:17:16 1998  Keith Seitz  <keiths@onions.cygnus.com>
+
+	* tracepoint.c (trace_start_command): Set trace_running_p.
+	(trace_stop_command): Clear trace_running_p.
+
+Sat Mar 28 15:19:48 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* NEWS: Update for 4.17 release.
+
+Fri Mar 27 10:15:50 1998  David Taylor  <taylor@tito.cygnus.com>
+
+	* tracepoint.c (parse_and_eval_memrange): Fix memory leaks.
+	(encode_actions): Use the new gen_trace_for_expr function
+	instead of expr_to_address_and_size; collect registers when
+	using expressions.  (clear_collection_list): Fix memory leak.
+
+1998-03-26  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	* ax-gdb.h (gen_trace_for_expr): Add prototype.
+
+Thu Mar 26 17:24:23 1998  David Taylor  <taylor@texas.cygnus.com>
+
+	* tracepoint.c (validate_actionline): Fix memory leak.
+	(encode_actions): Fix memory leak.
+
+Thu Mar 26 16:16:55 1998  David Taylor  <taylor@tito.cygnus.com>
+
+	* tracepoint.c (trace_mention): New function.
+	(trace_command): Call it.
+
+1998-03-26  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	* ax-general.c (ax_reqs): New function.
+	* ax.h (enum agent_flaws, struct agent_reqs): New types.
+	(agent_reqs): New extern prototype.  Well, actually, this was
+	there before, due to a premature checkin.
+ 	(struct aop_map): Add new `data_size' member.
+	* ax-general.c (aop_map): Supply its value.
+	* ax-gdb.c (agent_command): Call ax_reqs, for testing.
+
+	* ax-general.c (ax_print): If we encounter an invalid or
+	incomplete opcode, don't abort; just print an error message.
+
+	* ax-gdb.c: Generate trace bytecodes, as appropriate.
+	(trace_kludge): New variable.
+	(gen_fetch, gen_bitfield_ref): Emit trace bytecodes, if asked
+ 	nicely.
+	(expr_to_agent): Ask for no trace bytecodes.
+	(gen_trace_for_expr): New function.
+	(agent_command): Call it, and display the result appropriately ---
+	no struct axs_value, so no type or kind information.
+
+	* ax-gdb.c: Use TARGET_CHAR_BIT throughout, not HOST_CHAR_BIT.
+
+Thu Mar 26 22:29:28 1998  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
+
+        * tracepoint.c (trace_status_command): Recognize a boolean return
+        value from the stub to indicate whether trace experiment is
+        running.  Export this value as a global state variable.
+        (trace_running_p) for use by the GUI. (from Michael Snyder)
+        (trace_pass_command) added call to modify_tracepoint_hook.
+
+        * tracepoint.h export trace_running_p.
+
+Thu Mar 26 13:08:01 1998  David Taylor  <taylor@texas.cygnus.com>
+
+	* tracepoint.c (validate_actionline): do not error out if
+	exp->elts[0].opcode is not on short line -- let
+	expr_to_address_and_size handle it.
+
+1998-03-26  Jim Blandy  <jimb@zwingli.cygnus.com>
+
+	* tracepoint.c: Include "ax.h", not "agentexpr.h".
+
+	* tracepoint.c (encode_actions): Call expr_to_address_and_size,
+	not simply expr_to_agent.
+
+	* ax-general.c: Comment out code in progress, so everyone else can
+	at least compile.
+
+	* gdbtypes.c: Doc fix.
+
+	* ax.h, ax-gdb.h, ax-general.c, ax-gdb.c: New files.
+	* Makefile.in (REMOTE_OBJS): Add ax-general.o and ax-gdb.o.
+	(SFILES): Add ax-general.c, ax-gdb.c.
+	(ax_h): New variable.
+	(ax-general.o, ax-gdb.o): New rules.
+
+
+Tue Mar 24 16:22:40 1998  Stu Grossman  <grossman@bhuna.cygnus.co.uk>
+
+	* Makefile.in:  Derive SHELL from configure.
+	* config/d10v/d10v.mt config/m32r/m32r.mt
+	config/mn10200/mn10200.mt config/mn10300/mn10300.mt
+	config/d30v/d30v.mt:  Remove -lm from SIM.  This prevents
+	dependency checking of -lm (under NT native builds).  (It is
+	automatically added by configure if it exists.)
+	* doc/configure mswin/configure nlm/configure
+	testsuite/gdb.base/configure testsuite/gdb.c++/configure
+	testsuite/gdb.chill/configure testsuite/gdb.disasm/configure
+	testsuite/gdb.stabs/configure testsuite/gdb.threads/configure:
+	Regenerate with autoconf 2.12.1 to fix shell issues for NT native
+	builds.
+
+Mon Mar 23 18:10:57 1998  Ulrich Drepper  (drepper@cygnus.com)
+
+	* solib.c (solib_create_inferior_hook):  Rewrite previous
+	change to check the type of file via BFD.
+
+Mon Mar 23 13:52:28 1998  Ulrich Drepper  (drepper@cygnus.com) 
+ 
+	* breakpoint.c (breakpoint_re_set_one): Treat bp_shlib_events
+	like bp_breakpoints.
+	* solib.c (solib_create_inferior_hook): Relocate section addresses
+	if the alleged start address doesn't agree with the PC.
+
+Sat Mar 21 19:34:49 1998  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
+
+	merged changes from Foundry (list follows by file/author):
+
+        - Tom Tromey  <tromey@cygnus.com>
+        * Makefile.in (gdbres.o): New target.
+        (WINDRES): New define.
+        * configure: Rebuilt.
+        * configure.in (WINDRES): Define.
+        (CONFIG_OBS): Include gdbres.o on Windows.
+        * gdbtool.ico: New file.
+        * gdb.rc: New file.
+
+        * ser-unix.c
+        - Keith Seitz  <keiths@onions.cygnus.com>
+        (wait_for): Don't reset the timeout_remaining for CYGWIN32,
+        since we now effectively poll the serial port.
+        Don't reset the current_timeout, either, since this member is used
+        by hardwire_readchar to track the timeout and call the ui_loop_hook.
+	(hardwire_readchar): Poll the serial port for Cygwin32. We timeout
+ 	every second, update the UI, and loop around doing this until we
+ 	have hit the real timeout or we get data or an error. This will
+ 	allow the UI to stay active while gdb is "blocked" talking to the
+ 	target.
+       	- Martin M. Hunt  <hunt@cygnus.com>
+	(wait_for): Do reset current_timeout because it is only used to
+ 	keep track of what the current timeout for the scb is.
+
+        * top.c
+        - Martin M. Hunt  <hunt@cygnus.com>
+        (quit_confirm): Change exit message again
+        for GUI.
+        (pc_changed_hook): Add prototype.
+        - Tom Tromey  <tromey@cygnus.com>
+        (quit_confirm): Added missing `else'.
+        (quit_confirm): Special-case message if init_ui_hook is
+        set.
+
+        * symtab.c
+        - Martin M. Hunt  <hunt@cygnus.com>
+        (find_pc_sect_line): If no symbol information
+        is found, return correct pc anyway.
+        (find_methods): Comment out an apparently
+        bogus error message because it messes up Foundry.
+
+        * serial.c
+        - Martin M. Hunt  <hunt@cygnus.com>
+        (_initialize_serial): Add a description of
+        "set remotelogbase".
+
+        * findvar.c
+        - Martin M. Hunt  <hunt@cygnus.com>
+        (write_register_gen): Add call to
+        pc_changed_hook if the PC is being changed.
+
+        * defs.h
+        - Martin M. Hunt  <hunt@cygnus.com>
+        (pc_changed_hook): Define.
+
+        * command.c
+        -  Martin M. Hunt  <hunt@cygnus.com>
+        (do_setshow_command): If no arguments are supplied,
+        don't dump core, instead print out an error message.
+
+        * breakpoint.c
+        - Martin M. Hunt  <hunt@cygnus.com>
+        Make set_raw_breakpoint, set_breakpoint_count,
+        and breakpoint_count non-static so they are accessible from
+        elsewhere.
+        (enable_breakpoint): Enable breakpoint
+        with same disposition instead of changing all breakpoints
+        to donttouch.
+
+        * annotate.h
+	- Keith Seitz  <keiths@onions.cygnus.com>
+        Add declarations for annotation hooks.
+ 
+        * annotate.c
+	- Keith Seitz  <keiths@onions.cygnus.com>
+        Add hooks: annotate_starting_hook, annotate_stopped_hook,
+        annotate_signalled_hook, annotate_exited_hook.
+        (annotate_starting): If hook exists, call it instead.
+        (annotate_stopped): If hook exists, call it instead.
+        (annotate_exited): If hook exists, call it instead.
+        (annotate_signalled): If hook exists, call it instead.
+
+Fri Mar 20 14:45:36 1998  Michael Snyder  <msnyder@cleaver.cygnus.com>
+
+	* gdbserver/Makefile.in: add dependency on XM_CLIBS.
+	* gdbserver/low-sim.c (registers) force into alignment.
+	(create_inferior): Fix typo on new_argv; add abfd arg to 
+	sim_open, sim_create_inferior.  Add reg_size arg to 
+	sim_fetch_register, sim_store_register.  Make simulator
+	take a single-step to get into a known running state.
+	* gdbserver/gdbreplay.c: include fcntl.h for def'n of F_SETFL.
+	* gdbserver/server.c: Add remote_debug variable to control 
+	debug output.
+	* gdbserver/server.h: Add prototypes for enable/disable_async_io.
+	* gdbserver/remote-utils.c: add verbose debugging output controlled 
+	by "remote_debug" variable.  Add call to "disable_async_io()"
+	to avoid being killed by async SIGIO signals.
+	* config/m32r/m32r.mt: define GDBSERVER_(LIBS and DEPFILES),
+	so that gdbserver can be built with the m32r simulator.
+
+Fri Mar 20 09:04:06 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* gdbtypes.h (builtin_type_{,u}int{8,16,32,64}): New gdb builtin
+ 	types.
+
+	* gdbtypes.c (_initialize_gdbtypes): Initialize new types.
+
+	* mips-tdep.c (do_gp_register_row): Pad register value when GP
+ 	register is smaller than MIPS_REGSIZE.
+
+	* findvar.c (value_of_register): When raw and virtual register
+ 	values identical, check that sizes are consistent.
+
+Thu Mar 19 11:32:15 1998  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+	* minsyms.c (compare_minimal_symbols): If addresses are identical,
+	then compare on names.  Sorted list should have symbols with 
+	identical addresses AND names adjacent, so dups can be discarded.
+
+Wed Mar 18 12:50:17 1998  Jeff Law  (law@cygnus.com)
+
+	* stabsread.c (define_symbol): Don't look for ',' as a LRS
+	indicator.
+
+Wed Mar 18 10:34:51 1998  Nick Clifton  <nickc@cygnus.com>
+
+	* rdi-share/etherdrv.c: Set sys_errlist[] as char * not const char *.
+
+Fri Mar 13 15:43:53 1998  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+        * config/mips/xm-mips.h (CC_HAS_LONG_LONG):  Undefine for Ultrix
+        when compiling with native cc, the compiler has broken long long
+        support.
+
+Fri Mar 13 15:37:02 1998  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+        * config/m68k/xm-sun3os4.h:  Remove malloc declarations, they
+        are handled via autoconf now.
+        * remote.c (remote_ops, extended_remote_ops):  Replace static
+        forward declaration by moving the static definition to the top of
+        the file, for old K&R compilers.
+        * tracepoint.c (collect_symbol, trace_start_command):
+        Replace ANSI string concatenation with K&R compatible simple string.
+
+1998-03-11  Fred Fish  <fnf@ninemoons.com>
+
+	* source.c (select_source_symtab): Don't reach error if we have
+	a current_source_symtab from reading in partial symbol table.
+
+Fri Mar  6 13:10:27 1998  Fred Fish  <fnf@cygnus.com>
+
+	* utils.c (quit): Call SERIAL_DRAIN_OUTPUT rather than
+ 	SERIAL_FLUSH_OUTPUT.
+	* serial.h (struct serial_ops): Add drain_output, pointer to
+ 	function that waits for output to drain.
+	(SERIAL_DRAIN_OUTPUT): Macro to wait for output to drain.
+	* ser-unix.c (hardwire_drain_output): New function and prototype.
+
+	* ser-unix.c (hardwire_ops): Add entry for drain_output function.
+	* ser-tcp.c (tcp_ops): Ditto.
+	* ser-ocd.c (ocd_ops): Ditto.
+	* ser-mac.c (mac_ops): Ditto.
+	* ser-go32.c (dos_ops): Ditto.
+	* ser-e7kpc.c (e7000pc_ops): Ditto.
+
+Thu Mar  5 16:07:41 1998  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+	* sparcl-tdep.c: fix #endif comments
+
+Thu Mar  5 15:10:35 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* Makefile.in (BISON): Configure substitutes in @YACC@, not @BISON@.
+
+Thu Mar  5 14:42:41 1998  Keith Seitz  <keiths@onions.cygnus.com>
+
+	* ocd.c (ocd_open): If we fail ocd_start_remote, make sure we
+	error () so that we abort out of bdm_ppc_open.
+
+Wed Mar  4 16:53:52 1998  Martin M. Hunt  <hunt@cygnus.com>
+
+	* serial.c (_initialize_serial): Add a description of 
+	"set remotelogbase".
+
+	* command.c (do_setshow_command): If no arguments are supplied,
+	don't dump core, instead print out an error message.
+
+Wed Mar  4 01:39:08 1998  Ron Unrau  <runrau@cygnus.com>
+
+	* elfread.c (elf_symtab_read): merge SYMBOL_IS_SPECIAL into
+	MAKE_MSYMBOL_SPECIAL
+	* config/mips/tm-mips.h: ditto
+
+Tue Mar  3 17:19:08 1998  John Metzler  <jmetzler@cygnus.com>
+
+	* dwarfread.c (read_tag_pointer_type): Pointer sizes now come from
+	TARGET_PTR_BIT rather from sizeof(char *) on host.
+
+Tue Mar  3 14:37:02 1998  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+        * alpha-nat.c (fetch_osf_core_registers):  Renamed from
+        fetch_aout_core_registers.
+        (alpha_osf_core_fns):  Renamed from alpha_aout_core_fns, change
+        flavour to bfd_target_unknown_flavour for OSF core files.
+
+Mon Mar  2 17:44:13 1998  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+	* breakpoint.c (_initialize_breakpoint): Make "en" an alias
+	for "enable" (so that it doesn't conflict with "end").
+
+Mon Mar  2 17:04:25 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* Makefile (VERSION): Bump to 4.17.1.
+
+Mon Mar  2 16:59:15 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* rdi-share/etherdrv.c (sys_errlist): Add correct decl for Linux.
+
+Mon Mar  2 16:51:44 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* Makefile.in (YYFILES): Remove in maintainer-clean, not distclean.
+
+Mon Mar  2 16:47:11 1998  Philippe De Muyter  <phdm@macqel.be>
+
+        * Makefile.in (distclean): Add `rm $(YYFILES)'.
+
+Mon Mar  2 16:45:48 1998  Philippe De Muyter  <phdm@macqel.be>
+
+	* coffread.c (coff_read_enum_type): Set TYPE_FLAG_UNSIGNED if enum
+	is unsigned.
+
+Sun Mar  2 15:16:13 1998 Richard Henderson  <rth@cygnus.com>         
+
+        * configure.host, configure.tgt: Add sparc-linux.               
+        * sparc-nat.c: Include <asm/reg.h> not <machine/reg.h> for Linux.
+        * config/sparc/*linux*: New files.                         
+
+Mon Mar  2 12:12:41 1998  Anthony Thompson   (athompso@cambridge.arm.com)
+
+	* arm-tdep.c (gdb_print_insn_arm): Call print_insn_big_arm
+	if we're big endian; else call print_insn_little_arm.
+
+Mon Feb 24 11:24:57 1998  Richard Henderson  <rth@cygnus.com>
+
+        * Makefile.in (BISON): Don't even pretend to use yacc.
+        (c-exp.tab.o): Use bison -o to use a unique intermediate file.
+        (f-exp.tab.o, m2-exp.tab.o): Likewise.
+        (jv-exp.tab.o): Likewise.
+
+Tue Feb 24 03:32:59 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* remote-sim.c (gdbsim_fetch_register): Don't abort when the
+ 	register size is wrong.
+
+Thu Feb 19 16:49:48 1998 John Metzler  <jmetzler@cygnus.com>
+
+	* target.c (debug_to_fetch_registers,debug_to_store_registers,
+	debug-to_insert_breakpoint,debug_to_remove_breakpoint): tracing
+	64 bit targets crashed long long printfs.
+
+Tue Feb 17 16:36:22 1998  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+	* symfile.c (read_target_int_array): rename read_target_long_array
+        and force the sizeof an ovly_table element to sizeof(long),
+        instead of sizeof(int).
+
+Tue Feb 17 18:05:05 1998  Frank Ch. Eigler  <fche@cygnus.com>
+
+	* remote-mips.c (mips_request): Use unsigned long during parsing
+ 	returned value from monitor, to prevent accidental sign extension.
+
+Tue Feb 17 14:28:33 1998  Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
+
+        * acconfig.h: FORCE_MMCHECK changed to MMCHECK_FORCE.
+        * configure.in: Ditto.
+        * configure: Regenerated.
+
+Tue Feb 17 14:07:34 1998  Peter Schauer <pes@regent.e-technik.tu-muenchen.de>
+
+        * gdbtypes.c (check_typedef): Do not try to resolve the length of      
+        a type which has TYPE_FLAG_TARGET_STUB set, if the target type has
+        set TYPE_FLAG_TARGET_STUB as well.
+
+Tue Feb 17 14:32:18 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* remote-sim.c (gdbsim_fetch_register, gdbsim_store_register):
+ 	Pass register size to sim_{fetch,store}_register.  Check nr of
+ 	register bytes transfered is correct.
+
+Mon Feb 16 14:05:54 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* remote-d10v.c (remote_d10v_open): Call push_remote_target
+ 	instead of open_remote_target.
+
+	* remote.c (remote_xfer_memory): Use REMOTE_TRANSLATE_XFER_ADDRESS
+ 	to translate addr/size when defined.
+	(open_remote_target): Delete.
+
+	* target.h (open_remote_target): Delete.
+
+	* config/d10v/tm-d10v.h (REMOTE_TRANSLATE_XFER_ADDRESS): Define.
+
+Mon Feb 16 14:05:54 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* d10v-tdep.c (d10v_extract_return_value): Wierd.  GCC wants to
+ 	return odd sized register quantities with only half of the first
+ 	register used!
+
+	* config/d10v/tm-d10v.h (USE_STRUCT_CONVENTION): Use stack when
+ 	size > 8.
+
+Mon Feb 16 14:05:54 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* config/d10v/tm-d10v.h (USE_STRUCT_CONVENTION): Define. True when
+ 	sizeof type > 1.
+
+Sun Feb 15 16:10:50 1998  Ron Unrau   <runrau@cygnus.com>
+
+	* parse.c (write_dollar_variable): call new function 
+	  target_map_name_to_register to allow targets to define their own 
+	  register name aliases.
+	* infcmd.c (registers_info): use target_map_name_to_register so that
+	  "print $reg" and "info reg $reg" use the same register name aliases.
+
+Fri Feb 13 16:40:30 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* config/i386/i386mk.mt (OBJFORMATS): Delete, no longer used.
+	* config/i386/xm-i386mk.h: Fix an include.
+	* config/pyr/tm-pyr.h (PC_INNER_THAN): Remove, never used.
+
+Thu Feb 12 16:12:07 1998  Frank Ch. Eigler  <fche@cygnus.com>
+
+	* remote-mips.c (mips_enter_debug): Sleep before sending CR to
+ 	monitor.
+	(mips_exit_debug): Accept any whitespace / verbiage before monitor
+ 	prompt reappears.
+
+Thu Feb 12 18:25:42 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* d10v-tdep.c (show_regs): Avoid use of %llx when printing 8 byte
+ 	accumulators.
+
+Thu Feb 12 17:10:22 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* valops.c (value_at): For d10v, make read pointers with
+ 	read_target_unsigned_integer, keep addresses unsigned.
+	(value_fetch_lazy): Ditto.
+
+Thu Feb 12 12:14:02 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* remote-d10v.c: New file.  Layer the d10v GDB->remote memory map
+ 	on top of the remote serial memory transfer functions.
+
+	* config/d10v/d10v.mt (TDEPFILES): Add remote-d10v.o
+
+	* Makefile.in (remote-d10v.o): Add dependencies.
+
+	* remote.c (remote_open_1): Add arg extended_p, engage extended
+ 	protocol when extended_p.
+	(remote_open, extended_remote_open): Pass !extended_p /
+ 	extended_p to remote_open_1.
+
+	* remote.c (open_remote_target), target.h: New function.
+
+Wed Feb 11 08:41:15 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* config/i386/fbsd.mh (XDEPFILES): Add ser-tcp.o.
+
+Tue Feb 10 17:50:37 1998  Keith Seitz  <keiths@onions.cygnus.com>
+
+	* tracepoint.c (tracepoint_operation): Call the modify_tracepoint_hook
+	if it exists.
+	Remove static declaration of free_actions.
+
+	* tracepoint.h: Add declaration of free_actions.
+		
+Tue Feb 10 12:17:13 1998  Fred Fish  <fnf@cygnus.com>
+
+	* symtab.c (decode_line_1): Revert change that mistakenly
+	removed assignment of sals[0].pc field.
+
+Mon Feb 10 12:37:47 1998  Philippe De Muyter  <phdm@macqel.be>
+
+        * m68k/tm-delta68.h (EXTRACT_RETURN_VALUE): Type argument for
+        `REGISTER_CONVERT_TO_VIRTUAL is `TYPE', not
+        `REGISTER_VIRTUAL_TYPE (FP0_REGNUM)';
+        (STORE_RETURN_VALUE): Ditto, and offset for `write_register_bytes'
+        is `REGISTER_BYTE (FP0_REGNUM)', not `FP0_REGNUM'.
+        (FRAME_NUM_ARGS): New macro.
+        * m68k/tm-news.h (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE): Ditto.
+        * delta68-nat.c (clear_insn_cache): New function, forgotten in previous
+        patch.
+
+Mon Feb  9 11:10:06 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* d10v-tdep.c: Replace references to IMEM_ADDR and DMEM_ADDR with
+ 	D10V_MAKE_[DI]ADDR and D10V_CONVERT_[ID]ADDR_TO_RAW macros.
+
+	* config/d10v/tm-d10v.h (IMEM_START): Move to 0x01......
+	(DMEM_START): Move to 0x00......
+	(STACK_START): Move to 0x00..7ffe.
+	(D10V_MAKE_IADDR, D10V_MAKE_DADDR): Translate unconditionally.
+
+	* d10v-tdep.c (d10v_xlate_addr): Delete function.
+
+Mon Feb  9 15:10:21 1998  Fred Fish  <fnf@cygnus.com>
+
+	* symtab.c (fixup_psymbol_section): Move forward declaration to
+	top of file with other such decls.  Make it a static function.
+	* symtab.h: Minor formatting tweaks.
+
+Mon Feb  9 13:14:12 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* config/a29k-udi.mt, config/i960/vxworks960.mt (REMOTE_OBS):
+ 	Remove redefinition.
+	* config/i960/tm-i960.h (BREAKPOINT): Define.
+
+Mon Feb  9 15:35:38 1998  Ian Lance Taylor  <ian@cygnus.com>
+
+	* Makefile.in (init.c): Ignore errors when making init.c.  Seems
+	necessary to work around bug in Solaris make.
+
+Sun Feb  6 02:44:28 1998  Philippe De Muyter  <phdm@macqel.be>
+
+        * m68k/tm-delta68.h (CPLUS_MARKER): Macro deleted.
+        (EXTRACT_STRUCT_VALUE_ADDRESS): Macro defined.
+        (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE): Macros modified
+        because floating-point values return via %fp0.
+        (CLEAR_INSN_CACHE): New macro.
+        * m68k/tm-m68k.h (REGISTER_CONVERT_TO_VIRTUAL): Macro fixed
+        to use DOUBLEST.
+        (REGISTER_CONVERT_TO_RAW): Ditto.
+        * infptrace.c (child_xfer_memory): If CLEAR_INSN_CACHE is defined,
+        call it after having written in child process's memory.
+        * inflow.c (PROCESS_GROUP_TYPE): Macro defined if HAVE_TERMIO.
+        (gdb_has_a_terminal, terminal_ours_1): Functions fixed for HAVE_TERMIO.
+
+Fri Feb  6 16:17:30 1998  Jeffrey A Law  (law@cygnus.com)
+
+        * config/mips/tm-mips64.h (TARGET_LONG_BIT): Allow final target to
+        override.
+        (TARGET_LONG_LONG_BIT): Likewise.
+        (TARGET_PTR_BIT): Likewise.
+
+Fri Feb  6 17:42:22 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* config/d10v/tm-d10v.h (D10V_CONVERT_IADDR_TO_RAW,
+ 	D10V_CONVERT_DADDR_TO_RAW): Define.
+
+	* d10v-tdep.c (d10v_push_arguments): Re-write.  Pass arguments in
+ 	registers, regardless of their size, when they fit.
+
+Thu Feb  5 13:16:36 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* d10v-tdep.c (d10v_extract_return_value): For function pointers
+	translate address to IMAP area.
+
+	* config/d10v/tm-d10v.h (EXTRA_FRAME_INFO): Delete dummy from
+ 	struct.
+	(POP_FRAME): Point at generic_pop_current_frame.
+
+	* d10v-tdep.c (d10v_pop_frame): Delete code handling dummy frames,
+ 	handled earlier.
+	(d10v_push_return_address): New function.
+	(d10v_pop_dummy_frame): Delete.
+	(d10v_fix_call_dummy): Delete.
+	(d10v_call_dummy_address): Delete.
+
+	* d10v-tdep.c (d10v_init_extra_frame_info): Clear dummy and
+ 	frameless.
+
+	* d10v-tdep.c (d10v_push_arguments): Keep stack word aligned.
+
+	* config/d10v/tm-d10v.h (EXTRACT_STRUCT_VALUE_ADDRESS): Extract
+ 	address of structure from first ARG1_REGNUM.
+
+	* d10v-tdep.c (d10v_push_arguments): Force 4 byte args into
+ 	even-odd register pair.  Store 1 and 2 byte args in registers.
+
+	* valops.c (value_fetch_lazy): Ensure that a D10V function pointer
+ 	is fetched in the correct byte order.
+	(value_at): Ditto. Also ensure data pointers are mapped to data
+ 	segment.
+
+	* config/d10v/tm-d10v.h (D10V_DADDR_P, D10V_IADDR_P): 
+
+	* d10v-tdep.c: Replace 2 with REGISTER_RAW_SIZE.
+	(d10v_pop_frame): Replace R13 with LR_REGNUM.
+	(d10v_push_arguments): Replace R2 with ARG1_REGNUM.
+	(d10v_push_arguments): Replace 6 with ARGN_REGNUM.
+	(d10v_extract_return_value): Access return value with RET1_REGNUM.
+
+	* config/d10v/tm-d10v.h (ARG1_REGNUM, ARGN_REGNUM, RET1_REGNUM):
+ 	Define.
+	(STORE_RETURN_VALUE): Specify return register using RET1_REGNUM.
+	(STORE_STRUCT_RETURN): Specify ARG1_REGNUM as the struct ptr
+ 	location.
+
+Thu Feb  5 13:16:36 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* blockframe.c (generic_pop_dummy_frame): Flush the frame, no
+ 	longer valid.
+
+	* blockframe.c (generic_pop_current_frame), frames.h: New
+ 	function.
+
+Thu Feb  5 17:18:16 1998  Andrew Cagney  <cagney@b1.cygnus.com>
+
+	* remote-sim.c (gdbsim_create_inferior): clear_proceed_status
+ 	before /re/starting the simulator.
+
+Thu Feb  5 15:55:31 1998  C. M. Heard (heard@vvnet.com)
+
+        * top.c (do_nothing): Remove signal handler after signal is caught.
+
+Thu Feb  5 11:57:06 1998  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+	* tracepoint.c (tracepoint_operation): call free_actions instead
+	of free.  (free_actions): eliminate some memory leaks for actions.
+	(validate_actionline): pass string arg by reference, so we can 
+	change the pointer.  Change all memrange collection arguments to
+	canonical form (literal address and size), to enforce early
+	evaluation.  Accept UNOP_MEMVAL (assembly variables) for 
+	trace collection.  (parse_and_eval_memrange): accept expressions
+	for the address and size fields of a memrange (and evaluate
+	them immediately).  (several places): use -1 instead of zero
+	to distinguish an absolute memrange from a register-relative one.
+	(encode_actions): add handling for UNOP_MEMVAL (assembly variable).
+
+Wed Feb  4 17:40:21 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+        * Makefile.in (SFILES): add tracepoint.c.
+        (LINTFILES): add @CONFIG_SRCS@.
+        (SOURCES): Ditto.
+        * configure.in (CONFIG_SRCS): Mirror use of CONFIG_OBS.
+        * configure: Regenerated.
+
+Tue Feb  3 16:12:32 1998  Gordon W. Ross (gwr@mc.com)
+
+	* infptrace.c (child_resume): Don't try to step if 
+	NO_SINGLE_STEP is defined.
+
+Mon Feb  2 19:06:13 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* Makefile.in (VERSION): Bump to 4.16.2.
+
+Mon Feb  2 17:18:25 1998  Richard Henderson  <rth@cygnus.com>
+
+        * alpha-nat.c (fetch_aout_core_registers): Rename from
+        fetch_core_registers.
+        (fetch_elf_core_registers): New function.
+        (supply_gregset): Use ALPHA_REGSET_BASE.
+        (supply_fpregset): Likewise.
+        (fill_fpregset): Likewise.
+        (alpha_aout_core_fns): Rename from alpha_core_fns.
+        (alpha_elf_core_fns): New.
+        * config/alpha/alpha-linux.mh (NATDEPFILES): solib.o not osfsolib.o.
+        Disable MMALLOC.
+        * config/alpha/nm-linux.h (SVR4_SHARED_LIBS): Define if ELF.
+	(TARGET_ELF64): Likewise.
+        (ALPHA_REGSET_BASE): New.
+        * config/alpha/nm-osf.h (ALPHA_REGSET_BASE): New.
+        * config/alpha/tm-alphalinux.h: Include tm-sysv4.h.
+
+        * solib.c (elf_locate_base): Add TARGET_ELF64 support.
+        (info_sharedlibary_command): Likewise.
+
+        * configure.host: Match alpha*.
+        * configure.tgt: Likewise.
+
+Fri Jan 30 15:11:38 1998  David Taylor  <taylor@texas.cygnus.com>
+
+	Changes by <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE>
+	* infrun.c (IN_SOLIB_DYNSYM_RESOLVE_CODE): new macro for detecting
+ 	whether we are in the dynamic symbol resolution code 
+	(wait_for_inferior): invoke it.
+	* solib.c (in_svr4_dynsym_resolve_code): new function
+	(enable_break): record start and end of the dynamic linker
+	text and plt sections for use in in_svr4_dynsym_resolve_code.
+	* solib.h (IN_SOLIB_DYNSYM_RESOLVE_CODE): add svr4 definition;
+	(in_svr4_dynsym_resolve_code): declare it.
+	* config/nm-gnu.h (solib.h): move inclusion to after definition
+	of SVR4_SHARED_LIBS.
+	* config/nm-sysv4.h (solib.h): ditto.
+	* config/i386/nm-i386sco5.h (solib.h): ditto.
+	* config/i386/nm-linux.h (solib.h): ditto.
+	* config/mips/nm-irix5.h (IN_SOLIB_DYNSYM_RESOLVE_CODE): undefine.
+
+Thu Jan 29 19:39:31 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* coffread.c (coff_symtab_read) [SEM]: Remove code, macro can
+	never be defined.
+	* dbxread.c (process_one_symbol) [BLOCK_ADDRESS_ABSOLUTE]:
+	Remove, no longer needed.
+	* hppa-tdep.c (N_SET_MAGIC): Remove, no longer used.
+	* config/pa/xm-hppab.h (SEEK_SET, SEEK_CUR, SEEK_END): Ditto.
+	* config/mips/tm-mipsm3.h (NUMERIC_REG_NAMES): Ditto.
+	* config/mips/mipsm3.mt (TDEPFILES): Remove mipsread.o.
+
+Wed Jan 28 14:46:52 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	Suggested by Chris Walter <walter@budoe.bu.edu>:
+	* dwarfread.c (set_cu_language): Recognize Fortran.
+	* dwarf2read.c (set_cu_language): Ditto.
+	(read_array_type): Fix language test.
+
+Wed Jan 28 12:51:08 1998  Michael Snyder  (msnyder@cleaver.cygnus.com)
+ 
+        * blockframe.c (generic_frame_chain_valid): A frame pointer may
+        be valid if it is equal to the frame pointer of its caller (ie.
+        not necessarily strictly INNER_THAN).  Allows frameless functions.
+ 
+Wed Jan 28 11:23:25 1998  Mark Alexander  <marka@cygnus.com>
+
+	* monitor.c (monitor_vsprintf): New function to handle
+	printing of large addresses using %A format specifier.
+	(monitor_printf_noecho, monitor_printf): Use monitor_vsprintf
+	instead of vsprintf.
+	* dve3900-rom.c (_initialize_r3900_rom): Use %A instead of %Lx
+	to print addresses.
+
+Tue Jan 27 16:14:23 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* configure.in (CONFIG_LDFLAGS): Only add -export-dynamic
+	when using GNU ld.
+
+Mon Jan 26 19:07:46 1998  Jason Molenda  (crash@bugshack.cygnus.com)
+
+	* config/alpha/tm-alphalinux.h (alpha_linux_sigtramp_offset):
+	Add closing parenthesis.  From HJ Lu.
+
+Mon Jan 26 17:54:45 1998  Mark Alexander  <marka@cygnus.com>
+
+	* dve3900-rom.c: Improve performance by using memory commands
+	that print less fluff.  Minor cosmetic changes.
+	Eliminate compiler warnings.
+
+Sat Jan 24 23:44:43 1998  Martin M. Hunt  <hunt@cygnus.com>
+
+	* breakpoint.c (enable_breakpoint): Preserve breakpoint
+	disposition when enabling a breakpoint.
+
+	* symtab.c (find_pc_sect_line): If no symbol information
+	is found, return correct pc anyway.
+
+Fri Jan 23 17:26:22 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* configure.host (i[3456]86-*-osf1mk*, mips-*-mach3*,
+	ns32k-*-mach3*): Fix file names.
+	(i[3456]86-*-os9k, m88*-*-mach3*, w65-*-*): Remove config
+	recognition, no source files for these.
+	* configure.tgt (powerpc-*-aix4*): Remove config, now identical
+	to powerpc-*-aix*.
+	* config/powerpc/{aix4.mh,aix4.mt,tm-ppc-aix4.h}: Remove files,
+	no longer needed.
+
+Fri Jan 23 16:49:41 1998  Mark Alexander  <marka@cygnus.com>
+
+	* monitor.c (monitor_write, monitor_readchar): New functions.
+	* monitor.h (monitor_write, monitor_readchar): Declare.
+	* dve3900-rom.c: Add support for fast loading on ethernet connections.
+
+Fri Jan 23 07:47:06 1998  Fred Fish  <fnf@cygnus.com>
+
+	* config/d10v/tm-d10v.h (CALL_DUMMY): Define as "{ 0 }".
+	(TARGET_READ_FP): Define to d10v_read_fp rather than d10v_read_sp.
+	(TARGET_WRITE_FP): Define to d10v_write_fp rather than d10v_write_sp.
+	(d10v_write_fp, d10v_read_fp): Add prototypes.
+	* symtab.c (decode_line_1): Remove assignment of sals[0].pc field.
+	* symfile.c (simple_overlay_update, simple_overlay_update_1):
+	Ignore the size of overlay sections.  This check is redundant anyway.
+	* printcmd.c (print_frame_args): Ditto.
+	* valops.c (value_fetch_lazy): Ditto.
+	* values.c (unpack_long): Ditto.
+	* d10v-tdep.c (d10v_frame_chain, d10v_frame_find_saved_regs,
+	d10v_init_extra_frame_info): Fix some minor bugs so the finish command
+ 	works properly.
+	(show_regs): Change num1 and num2 types from "long long" to "LONGEST".
+	(d10v_read_fp, d10v_write_fp): New functions.
+	(d10v_push_arguments): Remove unneeded assigns to "val" and "contents".
+	(d10v_push_arguments): Fix for pointers and structs.
+	(d10v_extract_return_value): Fix for pointers and chars.
+
+Tue Jan 20 18:53:18 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* configure.tgt (i386-*-mach*, m88*-*-mach3*): Remove config
+	recognition, no source files for these (note that the i386 Mach
+	config is for pre-Mach 3).
+	(mips*-*-mach3*, ns32k-*-mach3*): Fix file names.
+	* config/mips/mipsel64.mt: Remove, never referenced.
+
+Mon Jan 19 14:01:28 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* top.c (print_gdb_version): Restore to original message.
+
+Mon Jan 19 13:34:40 1998  Ian Lance Taylor  <ian@cygnus.com>
+
+	From cgf@bbc.com (Chris Faylor):
+	* win32-nat.c (child_mourn_inferior): Call ContinueDebugEvent to
+	let the child exit.
+	(child_kill_inferior): Respond to all debug events as the child is
+	terminating.
+
+	* Makefile.in (all): Change gdb dependency to gdb$(EXEEXT).
+	(uninstall): Add $(EXEEXT) to file name to remove.
+	(gdb$(EXEEXT)): Rename target from plain gdb.
+	(gdb1$(EXEEXT)): Rename target from plain gdb1.
+	(clean, mostlyclean): Add $(EXEEXT) to binary names to remove.
+
+1998-01-16  Felix Lee  <flee@cygnus.com>
+
+	* top.c (print_gdb_version): delete stutter.
+
+Thu Jan 15 12:29:13 1998  Nick Clifton  <nickc@cygnus.com>
+
+	* remote-rdi.c (arm_rdi_open): Patch from Tony.Thompson@arm.com
+	to prevent spurous error messages on non-ICE targets.
+
+Wed Jan 14 19:27:02 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* config/mips/{r3900.mt,r3900l.mt,tm-r3900.h,tm-r3900l.h}:
+	Remove, no longer used.
+
+Wed Jan 14 18:11:26 1998  Michael Meissner  <meissner@cygnus.com>
+
+	Patch from Jim Wilson.
+	* d30v-tdep.c (d30v_frame_find_saved_regs_offsets): Properly
+	declare void function before use.
+
+	* config/d30v/tm-d30v.h (CALL_DUMMY): Initialize as { 0 }, not {}.
+
+Tue Jan 13 16:38:48 1998  Fred Fish  <fnf@cygnus.com>
+
+	* configure.in (--with-mmalloc): Add new configure arg to use the
+	mmalloc package.  Default is to not use it.
+	(START_INFERIOR_TRAPS_EXPECTED): Define to the integer 2, not
+	the string "2".
+	* acconfig.h (USE_MMALLOC, FORCE_MMCHECK): Add #undef.
+	* configure: Regenerated.
+	* config.in: Regenerated.
+	* Makefile.in (MMALLOC_DIR, MMALLOC_SRC): Remove.
+	(MMALLOC): Set using configure.
+	(MMALLOC_CFLAGS): Set using configure.
+
+	* config/i386/tm-linux.h (sys_quotactl): Define to 1 rather
+	than just defining it.
+	* mpw-make.sed: Undefine USE_MMALLOC rather than defining NO_MMALLOC.
+	* utils.c (NO_MMALLOC): Use USE_MMALLOC instead.
+	* objfiles.c: ditto.
+	* defs.h: ditto.
+
+	* config/sparc/sun4os4.mh (MMALLOC_CFLAGS): Remove.
+	* config/m68k/sun3os4.mh (MMALLOC_CFLAGS): Remove.
+	* config/i386/cygwin32.mh (MMALLOC_CFLAGS): Remove.
+	* config/alpha/alpha-osf3.mh (MMALLOC_CFLAGS): Remove.
+	* config/alpha/alpha-osf2.mh (MMALLOC_CFLAGS): Remove.
+	* gdbserver/Makefile.in (MMALLOC_*): Remove.
+	* config/rs6000/rs6000.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
+	* config/rs6000/aix4.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
+	* config/powerpc/aix4.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
+	* config/powerpc/aix.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
+	* config/ns32k/ns32km3.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
+	* config/mips/mipsm3.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
+	* config/mips/decstation.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
+	* config/m88k/cxux.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
+	* config/i386/xm-windows.h (NO_MMALLOC, NO_MMCHECK): Remove.
+	* config/i386/i386mk.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
+	* config/i386/i386m3.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
+	* config/i386/i386gnu.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
+	* config/alpha/alpha-osf1.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
+	* config/alpha/alpha-linux.mh (MMALLOC, MMALLOC_CFLAGS): Remove.
+
+Mon Jan 12 11:46:51 1998  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+	* config/m68k/tm-m68k.h (REGISTER_VIRTUAL_TYPE): make A0 thru A7
+	default to void pointer type (so that their default radix is hex).
+
+	* symtab.c: move rbreak_command from no_class to class_breakpoint
+	so it will be listed under "help breakpoints".
+
+Sat Jan 10 14:58:04 1998  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* rdi-share/hostchan.c: Remove gettimeofday declaration.
+
+Thu Jan  8 11:03:59 1998  Nick Clifton  <nickc@cygnus.com>
+
+	* remote-rdp.c: Applied patches submitted by Tony.Thompson@arm.com
+ 	to implement the Angel remote debugging interface.
+
+	* Makefile.in: Add build rules for remote-rdi.c and
+	rdi-share/libangsd.a.
+
+	* configure.tgt: Updated from source on branch.
+	* config/arm/tm-arm.h: Updated from source on branch.
+	* arm-tdep.c: Updated from source on branch.
+
+	* rdi-share: New directory, RDI library contributed by ARM.
+
+Mon Jan  5 20:21:59 1998  Mark Alexander  <marka@cygnus.com>
+
+	* monitor.h (MO_PRINT_PROGRAM_OUTPUT): Define.
+	* monitor.c (monitor_wait): Echo program output.
+	* dve3900-rom.c (_initialize_r3900_rom): Remove MO_HANDLE_NL flag,
+	add MO_PRINT_PROGRAM_OUTPUT flag.
+
+Mon Jan  5 18:21:11 1998  David Taylor  <taylor@texas.cygnus.com>
+
+	* top.h (HAVE_SIGSETJMP): define SIGJMP_BUF, SIGSETJMP, and
+	SIGLONGJMP appropriately based on whether HAVE_SIGSETJMP is
+	defined.
+	* top.c (return_to_top_level, catch_errors): use the new macros
+	* main.c (SET_TOP_LEVEL): ditto.
+	* config/xm-sysv4.h (HAVE_SIGSETJMP): Define.
+
+Fri Jan  2 18:48:58 1998  Mark Alexander  <marka@cygnus.com>
+
+	* configure.in: Double up brackets in shell case pattern.
+
+Fri Jan  2 17:06:05 1998  Michael Snyder  (msnyder@cleaver.cygnus.com)
+
+        * tracepoint.c (finish_tfind_command): improved algorithm for
+        deciding when we've "stepped" into a new stack frame.
+        (map_args_over_tracepoints): loop over tracepoint list "safely", 
+	since list elements may be deleted during loop.
+	(read_actions): add actions to history list.
+
+For older changes see ChangeLog-97
+
+Local Variables:
+mode: change-log
+left-margin: 8
+fill-column: 74
+version-control: never
+End: