Shuffle ChangeLog files...

1 files changed, 0 insertions, 5116 deletions

diff --git a/gdb/ChangeLog-96 b/gdb/ChangeLog-96
deleted file mode 100644
index 760b425..0000000
--- a/gdb/ChangeLog-96
+++ /dev/null
@@ -1,5116 +0,0 @@
-Tue Dec 31 15:19:32 1996  Geoffrey Noer  <noer@cygnus.com>
-
-        * config/mn10300/tm-mn10300.h: more small register fixes
-
-Tue Dec 31 06:51:43 1996  Mark Alexander  <marka@cygnus.com>
-
-	* config/i386/xm-windows.h: Undo previous change to SIGTRAP
-	and SIGQUIT values; it messed up non-MIPS targets.
-	* config/mips/tm-mips.h: Undefine BREAKPOINT, replace
-	with separate LITTLE_BREAKPOINT and BIG_BREAKPOINT definitions;
-	this fixes problem with setting breakpoints in little-endian
-	programs in the simulator.
-
-Mon Dec 30 00:14:06 1996  Doug Evans  <dje@seba.cygnus.com>
-
-	* remote-sim.c (gdbsim_open_p): New static local.
-	(gdbsim_open): Call unpush_target if sim open.  Set gdbsim_open_p.
-	(gdbsim_close): Only call sim_close if sim open.  Reset gdbsim_open_p.
-
-Sun Dec 29 09:15:03 1996  Mark Alexander  <marka@cygnus.com>
-
-	* config/i386/xm-windows.h: Make SIGTRAP and SIGQUIT consistent
-	with sim/mips/support.h.
-
-Fri Dec 27 14:53:40 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* v850-tdep.c (struct pifsr): Add cur_frameoffset field.
-	(v850_scan_prologue): Add debug code #ifdef'ed DEBUG.  Support new
-	compiler prologues using register save functions and short store
-	instructions.  Add support for functions with large stack frames.
-
-	* config/v850/tm-vm850.h ({R0,R1,R12,EP}_REGNUMS): New register
-	number defintiions for r0, r1, r12, ep.
-	(SAVE{1,2,3}_{START,END}_REGNUM): Register number definitions for
-	the 3 sets of saved registers.
-
-Thu Dec 26 19:56:55 1996  Mark Alexander  <marka@cygnus.com>
-
-	* valprint.c (print_longest): Don't lose upper bits
-	of 64-bit values on Windows.
-	* config/i386/xm-windows.h: Leave CC_HAS_LONG_LONG defined,
-	undefine PRINTF_HAS_LONG_LONG, so that 64-bit values will
-	be printed without loss of upper bits.
-
-Thu Dec 26 15:15:21 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>
-
-	* config/sparc/tm-sparclet.h: make registers ASR15, ASR19 invisible
-          (they're not useful, you can't change, write or even read them)
-	
-Thu Dec 26 15:20:48 1996  Fred Fish  <fnf@cygnus.com>
-
-	* config/pa/hppahpux.mh (TERMCAP): Always link to libc before
-	libcurses, to avoid picking up broken select() from libcurses
-	on some versions of HPUX.
-
-Thu Dec 26 15:14:41 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>
-	
-	* sparclet-rom.c: Remove includes of Unix system files.
-	  Add function "sparclet_supply_register" so that parse_register_dump
-	  will not seg-fault by calling a null function pointer.
-	  Remove XMODEM support (unfinished work?).
-	  Remove flag "MO_HANDLE_NL", so monitor's output can be read by humans.
-	  Add fill command.
-	  Remove colon from getreg.resp_delim so PSR register will work.
-	  Remove pointer to sparclet_load (downloading SREC's doesn't work).
-	  Null out local register names for %g0, all %cc and all %asr regs,
-	  since the monitor can't report them.  Will return zero instead.
-	* sparclet-stub.c: New -- remote protocol support for sparclet CPU.
-	* config/sparc/tm-sparclet.h: Re-arrange REGISTER_NAMES:
-	  Add back %g0 and %psr, add %cc coprocessor regs, add %asr regs.
-	  Adjust NUM_REGS and REGISTER_BYTES accordingly
-
-Tue Dec 24 10:27:37 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* remote-e7000.c (want_h8300h, want_nopc_h8300h): Renamed
-	from want and want_nopc.
-	(want_h8300s, want_nopc_h8300s): New variables for H8/S register
-	lists.
-	(e7000_fetch_registers): Use H8/300H or H8/S register list string
-	as needed.
-	(e7000_wait): Likewise.
-
-Mon Dec 23 02:25:58 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
-
-	* mips-tdep.c (mips_find_saved_regs):  If a frame has been
-	interrupted by a signal, figure out whether the registers that
-	the proc_desc claims are saved have been saved yet.
-	(mips_push_dummy_frame):  Write dummy frame register after all
-	registers have been saved in the dummy frame. Update comments
-	to reflect the fact that we are now using an AT_ENTRY_POINT
-	call dummy.
-
-Sun Dec 22 15:52:25 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
-
-	* d10v-tdep.c (d10v_skip_prologue): PR11287.  Fix problem where
-	some breakpoints weren't being set.
-
-Sat Dec 21 12:57:59 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
-
-	* config/mips/tm-mips.h (PC_IN_CALL_DUMMY):  Removed, the default
-	definition in inferior.h is sufficient.
-	* mips-tdep.c (mips_pc_in_call_dummy):  Ditto.
-	(mips_push_arguments):  Make sure that the stack is aligned to a
-	multiple of 8 after the arguments are pushed.
-	Structures are always passed by value in the old ABI.
-	Adjust argument register value on big endian targets when passing
-	a value whose length is less than the register size.
-	Write stack arguments with a single write_memory call.
-	(mips_pop_frame):  Use frame_saved_regs instead of proc_desc to
-	decide which registers have to be restored.
-
-	* irix5-nat.c (fill_gregset):  Sign extend registers before
-	filling in the gregset structure.
-
-Fri Dec 20 11:06:03 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* mswin/genmakes:  Don't define _DEBUG.  This breaks wingdb.
-
-Thu Dec 19 19:42:44 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* v850-tdep.c (v850_scan_prologue): Deal with -mep shorting
-	register saves by using the ep register.
-
-Thu Dec 19 15:57:16 1996  Doug Evans  <dje@canuck.cygnus.com>
-
-	* m32r-tdep.c (m32r_frame_find_saved_regs): Fix thinko in arg def.
-
-Thu Dec 19 09:38:56 1996  Mark Alexander  <marka@cygnus.com>
-
-	* values.c (unpack_double): Make it compile with MSVC++ 2.x.
-	* remote-mips.c (S_IROTH): Define if not defined by stat.h, e.g.
-	when using MSVC++.
-	(common_open): Fix help string.
-
-Wed Dec 18 23:01:32 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* mpw-make.sed: Use NewFolderRecursive for installation.
-
-Sat Dec 14 20:50:01 1996  Mark Alexander  <marka@cygnus.com>
-
-	* mips-tdep.c (mips_push_arguments): Handle floating point args.
-	* config/mips/tm-mips.h (FIX_CALL_DUMMY): Define to set up $25
-	correctly for PIC on Irix 5.
-
-Sat Dec 14 09:52:30 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
-
-	* i386-tdep.c (i386_frame_find_saved_regs):  Handle zero return
-	from get_pc_function_start gracefully.
-
-Sat Dec 14 00:43:57 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
-
-	* c-exp.y (qualified_name):  Replace explicit check for valid
-	destructor name with call to destructor_name_p.
-
-	* c-lang.h, c-typeprint.c (cp_type_print_method_args):  Removed,
-	no longer needed.
-
-	* c-typeprint.c (c_type_print_varspec_prefix, c_type_print_base):
-	Replace remaining fprintf_unfiltered calls with their filtered variant.
-	(c_type_print_base):  Do not print return type for destructors from
-	template classes.
-	Replace cp_type_print_method_args with cplus_demangle call to get
-	consistent type output for stubbed and unstubbed methods.
-
-	* cp-valprint.c (cp_print_class_method):  Replace
-	cp_type_print_method_args with cplus_demangle call to get consistent
-	type output for stubbed and unstubbed methods.
-
-	* gdbtypes.c, gdbtypes.h (get_destructor_fn_field):  New function
-	to find the destructor field indices for a type.
-
-	* gdbtypes.h (struct type):  Clarify comments for vptr_basetype
-	and arg_types fields.
-	(struct fn_field):  Remove args field, no longer used.
-
-	* symtab.c (decode_line_1), valops.c (value_struct_elt,
-	check_field_in):  Use get_destructor_fn_field to find the destructor
-	field indices instead of assuming that the compiler passes the member
-	function fields in a specific order.
-
-	* symtab.c (find_methods):  Pass NULL instead of SYMBOL_BLOCK_VALUE
-	to lookup_symbol.
-	(list_symbol):  Replace cp_type_print_method_args with cplus_demangle
-	call in zapped out code and explain why this code is zapped out.
-
-Thu Dec 12 13:29:14 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* config/powerpc/ppc{,le}-sim.mt (SIM): Add the simulator common
-	library ../sim/common/libcommon.a.
-
-Wed Dec 11 11:15:08 1996  Doug Evans  <dje@canuck.cygnus.com>
-
-	* monitor.c (monitor_load): Add support for load address argument.
-	* dsrec.c: #include <time.h>.
-	(load_srec): New argument load_offset.  Print download stats.
-	* srec.h (load_srec): Update prototype.
-	* sh3-rom.c (sh3_load): Update call to load_srec.
-
-Mon Dec  9 17:34:05 1996  Geoffrey Noer  <noer@cygnus.com>
-
-	* config/mn10300/tm-mn10300.h: more small register fixes
-	* mn10300-tdep.c: filled in from another target
-
-Mon Dec  9 17:12:19 1996  Doug Evans  <dje@canuck.cygnus.com>
-
-	* monitor.c (monitor_insert_breakpoint): Handle bi-endian machines.
-
-Mon Dec  9 15:58:51 1996  Mark Alexander  <marka@cygnus.com>
-
-	* config/mips/tm-mips.h: Get rid of call-dummy code.
-	Minor changes to make pre-ANSI compilers happy.
-	* mips-tdep.c: Minor changes to make pre-ANSI compilers happy.
-	(mips_push_arguments): Rewrite to partially support EABI.
-	(mips_pc_in_call_dummy): New function.
-	* infcmd.c: Include symfile.h to get prototype of entry_point_address,
-	which fixes 64-bit sign extension bug on MIPS.
-
-Mon Dec  9 00:14:49 1996  Geoffrey Noer  <noer@cygnus.com>
-
-	* config/mn10300/tm-mn10300.h: fix register names
-	* mn10300-tdep.c: new skeleton tdep for mn10300
-
-Sun Dec  8 18:02:57 1996  Doug Evans  <dje@canuck.cygnus.com>
-
-	* remote-sim.h: Update some comments.
-	* remote-sim.c (gdb_os_error): New function.
-	(init_callbacks): Fix initializing of gdb_callback.  Add gdb_os_error.
-	(gdb_os_printf_filtered): Use gdb_stdout, not stdout.
-
-Sun Dec  8 00:36:31 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
-
-	* irix5-nat.c (supply_gregset, fill_gregset):  Handle gregsets
-	from O32 and N32 ABI.
-	(xfer_link_map_member):  Work around problem with alignments
-	in struct obj when compiling GDB under N32 ABI.
-
-Thu Dec  5 23:30:44 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* d10v-tdep.c: Add support for examination and interpretation
-	of instruction trace buffer.
-	(trace, untrace, info trace, tdisassemble): New commands.
-
-Thu Dec  5 14:06:23 1996  Doug Evans  <dje@canuck.cygnus.com>
-
-	* config/sparc/tm-sparclet.h (TARGET_BYTE_ORDER): Undef.
-	(TARGET_BYTE_ORDER_SELECTABLE): Define.
-	(BREAKPOINT): Undef.
-	({BIG,LITTLE}_BREAKPOINT): Define.
-	(TM_PRINT_INSN_MACH): Redefine for sparclet.
-
-Wed Dec  4 16:34:05 1996  Geoffrey Noer  <noer@cygnus.com>
-
-	* config/mn10300/mn10300.mt, config/mn10300/tm-mn10300.h: New.
-
-Tue Dec  3 13:02:08 1996  Fred Fish  <fnf@ninemoons.com>
-
-	* infptrace.c (store_inferior_registers): Move some common code out
-	to store_register, like fetch_inferior_registers & fetch_register.
-	(store_register): New function, from store_inferior_registers.
-	(fetch_inferior_registers, fetch_register): Minor code tweaks to
-	make {fetch,store}_inferior_registers and {fetch,store}_register
-	routines as similar in structure as possible.
-	(fetch_inferior_registers, store_inferior_registers): Eliminate
-	local variable numregs and just use ARCH_NUM_REGS directly.
-	
-Tue Dec  3 11:38:14 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>
-
-	* blockframe.c: add macro USE_GENERIC_DUMMY_FRAMES to enable/disable
-	  code for generic call_dummy frames.
-	* config/h8300/tm-h8300.h: turn on USE_GENERIC_DUMMY_FRAMES
-	* config/m32r/tm-m32r.h: Ditto.
-	* config/sh/tm-sh.h: Ditto.
-	* config/v850/tm-v850.h: Ditto.
-
-Sun Dec  1 00:41:47 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
-
-	* vax-tdep.c (vax_print_insn, print_insn_arg):  Use info functions
-	for printing. From Valeriy Ushakov <uwe@ptc.spbu.ru>.
-
-Sun Dec  1 00:40:46 1996  Geoffrey Noer  <noer@cygnus.com>
-
-        * configure.tgt: Add new mn10300 entry.
-
-Sun Dec  1 00:18:59 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
-
-	Add support for Irix 6.2 native O32 and N32 ABI.
-
-	* config.in, configure.in, configure:  Check for <objlist.h>.
-	* configure.tgt:  Handle mips*-sgi-irix6* like irix5 for now.
-
-	* cp-valprint.c (cp_print_value_fields):  Use SYMBOL_VALUE_ADDRESS
-	instead of SYMBOL_BLOCK_VALUE to get the address of a static member.
-
-	* dwarf2read.c:  Turn warnings and recoverable errors into complaints,
-	add new complaints where appropriate.
-	gcc -Wall cleanup.
-	(struct line_head):  Change line_base from char to int to avoid
-	problems with compilers whose plain char is represented by an
-	unsigned char.
-	(struct partial_die_info):  Add is_declaration field.
-	(dwarf2_tmp_obstack):  New obstack for allocating temporary storage
-	used during symbol reading.
-	(cu_header_offset):  New variable for resolving relative reference
-	dies.
-	(optimized_out, basereg, islocal, frame_base_reg, frame_base_offset):
-	New interface variables for decode_locdesc.
-	(struct dwarf2_pinfo):  New structure for communication between
-	psymtab and symtab reading, passed via pst->read_symtab_private.
-	(dwarf2_has_info, dwarf2_build_psymtabs):  Accept objects files
-	without line number sections.
-	(dwarf2_build_psymtabs_hard):  Initialize temporary obstack
-	for symbol reading.
-	Allocate and initialize pst->read_symtab_private.
-	Relocate pst->textlow and pst->texthigh with baseaddr.
-	(scan_partial_symbols):  Do not add DW_AT_declaration symbols
-	to the partial symbol table.
-	Add file scope enumerator symbols to the partial symbol table.
-	Fix typo in highpc computation.
-	If we didn't find a lowpc, set it to highpc to avoid complaints
-	from `maint check.
-	(add_partial_symbol):  Relocate symbol values with baseaddr.
-	Add static DW_TAG_subprogram and DW_TAG_variable symbols to the
-	minimal symbol table.
-        Obtain symbol values for DW_TAG_variable symbols from the location
-	descriptor, skip symbols with missing location desciptors.
-	Skip symbols for aggregate types without children.
-	Handle enumerator symbols.
-	(dwarf2_psymtab_to_symtab):  Issue symbol reading message if verbose.
-	(psymtab_to_symtab_1):  Set local variables from
-	pst->read_symtab_private, set cu_header_offset and baseaddr.
-	Initialize temporary obstack for symbol reading, initialize
-	buildsym and add a cleanup to really_free_pendings.
-	Relocate highpc with baseaddr when calling end_symtab.
-	If the compilation is from a C file generated by language
-	preprocessors, do not set the symtab language if it was already
-	deduced by start_subfile.
-	Removed verbose sorting symbol table message.
-	(process_die):  Handle DW_TAG_ptr_to_member_type and
-	DW_TAG_reference_type.
-	Use read_subroutine_type to get the function type for
-	DW_TAG_subprogram before calling read_func_scope.
-	(read_file_scope):  Initialize file name to <unknown>, start_subfile
-	expects a non-NULL name.
-	If we didn't find a lowpc, set it to highpc to avoid complaints
-	from finish_symbol.
-	Relocate lowpc and highpc with baseaddr.
-	Get rid of Irix6.2 native cc compile machine prefix in comp_dir.
-	Zero out ftypes for each new compilation unit (may be different
-	language or different objfile).
-	Accept compilation units without line number information, pass
-	comp_dir to decode_lines.
-	(read_func_scope):  Initialize function name to <unknown> to avoid
-	core dumps when DW_AT_name is missing.
-	Relocate lowpc and highpc with baseaddr.
-	Handle DW_AT_frame_base, keep result for DW_OP_fbreg operations.
-	Pass function type to new_symbol.
-	(read_lexical_block_scope):  Relocate lowpc and highpc with baseaddr.
-	(read_structure_scope):  Set TYPE_TAG_NAME, not TYPE_NAME.
-	Handle DW_TAG_class_type.
-	Copy fields to type_obstack, release temporary storage for fields.
-	Don't add symbol if die is a stub die and has no children.
-	Handle C++ static member fields.
-	(read_enumeration):  Set TYPE_TAG_NAME, not TYPE_NAME.
-	Copy fields to type_obstack, release temporary storage for fields.
-	Let new_symbol handle the symbol creation for enumerators
-	instead of handcrafting a symbol.
-	Determine signedness of enum type from enumerators.
-	(dwarf_read_array_type):  Handle variable length arrays.
-	Use lookup_pointer_type instead of handcrafting a type.
-	Create array type only if a DW_TAG_subrange_type was found.
-	(read_tag_pointer_type, read_tag_reference_type):
-	Use lookup_pointer_type and lookup_reference_type instead
-	of handcrafting a type.
-	(read_tag_ptr_to_member_type):  New function to handle 
-	DW_TAG_ptr_to_member_type.
-	(read_subroutine_type):  Handle parameter dies.
-	Use lookup_function_type instead of handcrafting a type.
-	(read_typedef):  Allocate a TYPE_CODE_TYPEDEF type for the typedef.
-	(read_base_type):  If the type has a name, use init_type to create
-	a new type instead of second guessing a fundamental type.
-	(read_comp_unit):  Reset die reference table before building
-	a new one.
-	(dwarf2_read_section):  Read section contents into psymbol_obstack.
-	(dwarf2_read_abbrevs):  Handle unterminated abbreviations
-	for a compile unit gracefully.
-	(read_partial_die):  Zero partial die before reading its info.
-	Handle DW_AT_declaration.
-	Fix typo in handling of DW_FORM_block4.
-	(read_full_die):  Fix typo in handling of DW_FORM_block4.
-	(read_1_signed_byte, read_2_signed_bytes, read_4_signed_bytes):
-	New routines to get signed values from a buffer.
-	(read_n_bytes, read_string):  Allocate storage from the temporary
-	obstack. If the host char size permits it, return pointer
-	to buffer instead of allocating storage.
-	(set_cu_language):  Handle DW_LANG_Mips_Assembler.
-	(dwarf_attr):  Return NULL if reference die for DW_AT_specification
-	or DW_AT_abstract_origin die is not found.
-	(record_minimal_symbol):  Removed, replaced with a direct call to
-	prim_record_minimal_symbol, it now handles saving the string itself.
-	(convert_locdesc):  Removed, partial symtab reading now uses
-	decode_locdesc.
-	(dwarf_attr):  Use dwarf2_get_ref_die_offset to get the absolute
-	offset for the die reference.
-	(dwarf_decode_lines):  Complain if the line section info is missing.
-	Use read_1_signed_byte to extract lh.line_base to avoid
-        problems with compilers whose plain char is represented by an
-        unsigned char.
-	Add cleanups for allocated temporary storage.
-	Start a subfile for the first file in the state machine.
-	Fix off by one problem with dirs.dirs access.
-	Use comp_dir when directory index is 0.
-	Support multiple sequences (from Jason Merrill <jason@cygnus.com>).
-	(dwarf2_start_subfile):  Try to keep line numbers from identical
-	absolute and relative file names in a common subfile.
-	(new_symbol):  Allocate symbol and symbol name on the symbol_obstack.
-	Set SYMBOL_LINE from DW_AT_decl_line if present.
-	Set SYMBOL_TYPE from passed type if not NULL.
-	Change DW_TAG_variable symbol types with missing type entries
-	to a sensible type.
-	Handle optimized_out, offreg and islocal storage classes.
-	Add external symbols with type information whose address isn't
-	known as LOC_UNRESOLVED symbols.
-	Synthesize typedefs for C++ classes, structs, unions and enumerations.
-	Handle DW_TAG_enumerator symbols, complain for unrecognized
-	symbol tags.
-	(die_type):  A missing DW_AT_type represents a void type.
-	Use dwarf2_get_ref_die_offset to get the absolute offset for
-	the die reference.
-	(die_containing_type):  New function to build type from
-	DW_AT_containing_type attribut.
-	(read_type_die):  Handle DW_TAG_ptr_to_member_type.
-	Treat DW_TAG_subprogram like DW_TAG_subroutine_type.
-	(dwarf_base_type):  Fix typo with creation of FT_UNSIGNED_SHORT
-	fundamental type.
-	(create_name):  Removed, symbol name allocation is now done
-	in new_symbol.
-	(dump_die):  Use print_address_numeric to print a CORE_ADDR.
-	(dwarf2_empty_die_ref_table):  New function to clear the die
-	reference table.
-	(dwarf2_get_ref_die_offset):  New function to get the absolute
-	die offset from a die reference attribute.
-	(decode_locdesc):  Complete rewrite using a stack, code mostly
-	borrowed from dwarfread.c:locval.
-	(dwarf_alloc_type):  Removed, replaced by direct calls to alloc_type.
-	(dwarf_alloc_block):  Allocate block on temporary obstack.
-
-	* elfread.c (elf_symtab_read):  When handling Irix dynamic symbols,
-	skip section name symbols and relocate all others.
-	(elf_symfile_read):  Build dwarf2 psymtab even if offset is non-zero.
-
-	* irix5-nat.c (fetch_core_registers):  Handle core_reg_sect
-	from N32 executables. Call registers_fetched after extracting
-	the registers.
-	(obj_list_variant, struct link_map, LM_OFFSET, LM_ADDR):  New
-	definitions to enable support of O32 and N32 format objlists.
-	(struct so_list):  New members offset, so_name and lmstart to
-	eliminate dependencies from the objlist format used.
-	(solib_map_sections, symbol_add_stub, solib_add,
-	info_sharedlibrary_command, solib_address, clear_solib):  Use
-	so_name and LM_OFFSET.
-	(first_link_map_member):  Rewrite to enable support of O32 and N32
-	format objlists.
-	(next_link_map_member, xfer_link_map_member):  New functions to
-	support O32 and N32 format objlists.
-	(find_solib):  Use first_link_map_member, next_link_map_member and
-	xfer_link_map_member.
-	(solib_create_inferior_hook):  Use TARGET_SIGNAL_* instead of
-	host signal numbers.
-
-	* mdebugread.c (parse_partial_symbols, handle_psymbol_enumerators):
-	Pass CORE_ADDR variant to add_psymbol_to_list.
-
-	* mips-tdep.c (heuristic_proc_desc):  Stop examining the prologue
-	if we encounter a positive stack adjustment. Handle `move $30,$sp'.
-	Handle `sd reg,offset($sp)' for 32 bit ABIs.
-
-	* symmisc.c (dump_msymbols, print_partial_symbols):  Use
-	print_address_numeric to print a SYMBOL_VALUE_ADDRESS.
-	(dump_symtab):  Print compilation directory if it is not NULL.
-
-	* valops.c (search_struct_field, value_struct_elt_for_reference):
-	Use SYMBOL_VALUE_ADDRESS instead of SYMBOL_BLOCK_VALUE to get the
-	address of a static member.
-
-Thu Nov 28 00:46:24 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
-
-	* vax-tdep.c (vax_print_insn):  Made static, modified to take
-	disassemble_info as parameter.
-	(_initialize_vax_tdep):  New function to initialize tm_print_insn
-	to vax_print_insn.
-
-Wed Nov 27 11:29:06 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>
-
-	* blockframe.c: Remove old-style CALL_DUMMY code.
-	* h8300-tdep.c, config/h8300/tm-h8300.h: Ditto.
-	* m32r-tdep.c, config/m32r/tm-m32r.h: Ditto.
-	* sh-tdep.c, config/sh/tm-sh.h: Ditto.
-	* v850-tdep.c, config/v850/tm-v850.h: Ditto.
-	
-Wed Nov 27 10:32:14 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>
-
-	* breakpoint.c: DELETE command will not delete CALL_DUMMY breakpoint.
-	* blockframe.c: Add target-independant support for managing
-			CALL_DUMMY frames on the host side.
-	* frame.h:      Declarations for generic CALL_DUMMY frame support.
-	* h8300-tdep.c: Add target function calls using generic frame support.
-	* config/h8300/tm-h8300.h: config for generic target function calls.
-	* m32r-tdep.c:  Add target function calls using generic frame support.
-	* config/m32r/tm-m32r.h:   config for generic target function calls.
-	* sh-tdep.c:    Add target function calls using generic frame support.
-	* config/sh/tm-sh.h:       config for generic target function calls.
-	* v850-tdep.c:  Add target function calls using generic frame support.
-	* config/v850/tm-v850.h:   config for generic target function calls.
-	* valops.c:     ADD PUSH_RETURN_ADDRESS so that it doesn't have to be
-			done by PUSH_ARGUMENTS when there's no CALL_DUMMY.
-
-Tue Nov 26 19:21:35 1996  Mark Alexander  <marka@cygnus.com>
-
-	* config/mips/tm-mips.h (ADDR_BITS_REMOVE, TARGET_READ_SP): Define.
-	(mips_addr_bits_remove): Declare.
-	* mips-tdep.c (mips_push_dummy_frame): Fix heuristic-fence-post
-	errors when hitting breakpoints during inferior function calls
-	in 64-bit programs.
-	(fix_sign_extension): Make public, rename to mips_addr_bits_remove.
-	* utils.c (paddr_nz, preg_nz): New functions, similar to 
-	paddr and preg but don't print leading zeroes.
-	* defs.h (paddr_nz, preg_nz): Declare.
-	* remote-mips.c: Use paddr_nz instead of paddr throughout
-	to reduce packet size.
-	(pmon_end_download): Improve timeout error handling.
-
-Tue Nov 26 17:21:37 1996  Ian Lance Taylor  <ian@cygnus.com>
-
-	* configure: Rebuild with autoconf 2.12.
-
-Mon Nov 25 13:17:16 1996  Fred Fish  <fnf@ninemoons.com>
-
-	From: Paul Eggert <eggert@twinsun.com>
-	* remote-bug.c (wait_strings): Avoid creating a trigraph.
-
-Fri Nov 22 15:55:22 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
-
-	* valops.c (value_at, value_fetch_lazy): Put in D10V call 
-	to fix up address pointers.
-	* values.c (value_from_longest): Removed previous d10v changes.
-	* config/d10v/tm-d10v.h (TARGET_PTR_BIT): Change to 4 bytes.
-	
-Fri Nov 22 10:06:19 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
-
-	* config/i386/nm-i386v4.h (LOSING_POLL):  Define, needed for
-	Unixware 1.1.2.
-
-Thu Nov 21 19:13:58 1996  Mark Alexander  <marka@cygnus.com>
-
-	* mips-tdep.c: Replace hard-coded constants with MIPS_INSTLEN.
-	(common_breakpoint): Use paddr instead of %x to print 64-bit values.
-	(heuristic_proc_desc): Add tests for 64-bit instructions.
-	(init_extra_frame_info, mips_push_arguments): Recognize additional
-	registers for EABI.
-	* remote-mips.c: Extend DDB target to allow TFTP downloads.
-	* config/mips/tm-mips.h (MIPS_LAST_ARG_REGNUM, MIPS_NUM_ARG_REGS):
-	Define.
-
-Wed Nov 20 19:09:16 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
-
-	* infcmd.c (do_registers_info): Call val_print with the
-	virtual buf instead of the raw buf.  Needed for REGISTER_CONVERT 
-	to work with non-floating point regs.
-
-	* d10v-tdep.c (d10v_skip_prologue): If we have line debugging 
-	information, then the end of the prologue should the first 
-	assembly instruction of the first source line.
-	
-	* values.c (value_from_longest): Put in D10V call to 
-	fix up address pointers.
-
-	* config/d10v/tm-d10v.h (REGISTER_VIRTUAL_SIZE): Modified.
-	(REGISTER_VIRTUAL_TYPE): Modified for PC_REGNUM and SP_REGNUM.
-	(REGISTER_CONVERTIBLE): Make PC and SP convertible.
-	(REGISTER_CONVERT_TO_VIRTUAL): Define.
-	(REGISTER_CONVERT_TO_RAW): Define.
-	(D10V_MAKE_DADDR): Define.
-	(D10V_MAKE_IADDR): Define.
-
-Wed Nov 20 16:15:15 1996  Geoffrey Noer  <noer@cygnus.com>
-
-        * config/i386/cygwin32.mh: add MMALLOC_CFLAGS = -I$(MMALLOC_SRC)
-        -DMMCHECK_FORCE=1 so memory checks are loaded for cygwin32 gdb
-
-Wed Nov 20 00:43:09 1996  Doug Evans  <dje@canuck.cygnus.com>
-
-	* callback.h: Delete, moved to ../include.
-	* callback.c: Delete, moved to ../sim/common.
-	* Makefile.in (SFILES,COMMON_OBJS): Delete callback.[co].
-	(callback.o): Delete rule.
-	* remote-sim.h: No longer include callback.h.
-	(sim_callback_write_stdout): Delete prototype.
-	* remote-sim.c (init_callbacks,end_callbacks): New functions.
-	(gdb_os_write_stdout, gdb_os_printf_filtered): New functions.
-	(gdb_callback, callbacks_initialized): New static globals.
-	(gdbsim_open): Call init_callbacks.
-	(gdbsim_close): Call end_callbacks.
-	(simulator_command): Call init_callbacks.
-
-	* config/h8300/h8300.mt (SIM): Change to ../sim/h8300/libsim.a.
-	* config/h8500/h8500.mt (SIM): Change to ../sim/h8500/libsim.a.
-
-Mon Nov 18 15:58:05 1996  Jim Wilson  <wilson@cygnus.com>
-
-	* config/mips/tm-mips.h (FIX_CALL_DUMMY): Change unsigned LONGEST
-	to ULONGEST.
-
-Fri Nov 15 15:34:18 1996  Fred Fish  <fnf@cygnus.com>
-
-	From Peter Schauer <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE>
-	* procfs.c (wait_fd):  Handle EINTR error return from poll
-        by restarting the poll.
-	* defs.h (PIDGET): Define a default version that just
-	returns its argument unchanged.
-	* inflow.c (terminal_init_inferior): Eliminate #ifdef
-	of PIDGET and fold both alternatives into common code.
-	(pass_signal): Use PIDGET for pid passed to kill().
-
-Thu Nov 14 15:54:20 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* utils.c (paddr,preg): Use a static variable initialized to 32
-	instead of doing addr>>32 to eliminate a warning produced by GCC
-	on 32-bit systems.
-
-	* config/d10v/tm-d10v.h (ULONGEST): Define.
-
-Tue Nov 12 12:25:27 1996  Jim Wilson  <wilson@cygnus.com>
-
-	* c-typeprint.c (cp_type_print_method_args): Pass -1 for show in
-	recursive call to type_print.
-	
-Tue Nov 12 12:18:29 1996  Jim Wilson  <wilson@cygnus.com>
-
-	* defs.h (ULONGEST): New macro.
-	* alpha-tdep.c, breakpoint.c, c-exp.y, ch-exp.c, convex-xdep.c,
-	corefile.c, defs.h, f-exp.y, findvar.c, gdbcore.h, m2-exp.y,
-	m88k-tdep.c, printcmd.c, remote-hms.c, remote-mips.c, sparc-tdep.c,
-	valarith.c, valops.c, values.c, config/gould/tm-np1.h,
-	config/mips/tm-mips.h, mswin/prebuilt/gdb/cexptab.c,
-	mswin/prebuilt/gdb/fexptab.c, mswin/prebuilt/gdb/m2exptab.c:
- 	Change all occurances of unsigned LONGEST to ULONGEST.
-
-	* configure.host (mips-sgi-irix6): Add.
-	
-Tue Nov 12 12:16:40 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>
-
-	* sh-tdep.c: Add functionality for target function calls.
-	* config/sh/tm-sh.h: Add support for target function calls.
-
-Tue Nov 12 12:06:58 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>
-	 
-	* m32r-tdep.c: Add functionality for target function calls.
-	* valops.c:    Small change to support target function calls.
-	* config/m32r/tm-m32r.h: Add support for target function calls.
-	 
-Mon Nov 11 17:15:59 1996  Geoffrey Noer  <noer@cygnus.com>
-
-	* defs.h: Modify Nov 11 12:59:00 change so _MSC_VER is checked
-	instead of _WIN32.
-	* win32-nat.c: Fix Nov 11 12:59:00 change (windows.h should
-	be included instead of windefs.h for compilers other than
-	VC++).
-	* mswin/windefs.h: Remove ^Ms and change C++ style comments
-	to C style comments.
-
-Mon Nov 11 14:32:38 1996  Mark Alexander  <marka@cygnus.com>
-
-	* utils.c (get_cell): Fix off-by-one bug.
-	* mips-tdep.c (get_frame_pointer, fix_sign_extension):
-	New functions to consolidate common code.
-	(mips_frame_chain, init_extra_frame_info): Use new functions
-	to fix problems with backtrace and finish commands on ddb board.
-
-Mon Nov 11 12:59:00 1996  Dawn Perchik <dawn@critters.cygnus.com>
-
-	* mips-tdep.c, remote-mips.c, values.c, mdebugread.c,
-	config/mips/tm-mips.h: Add/fix bugs for 64-bit mips support.
-	* defs.h: Cleanup; add prototypes.
-	* corefile.c: Change FIXME #ifdef
-	* win32-nat.c: Include windefs instead of windows.h.
-	* utils.c: Add routines for printing addresses and registers 
-	based on type size.
-
-Sat Nov  9 01:05:10 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
-
-	* alpha-tdep.c (heuristic_proc_desc):  Stop examining the prologue
-	if we encounter a positive stack adjustment. 
-	(find_proc_desc):  If heuristic_fence_post is non-zero, use
-	heuristic_proc_start to determine the start of a function before
-	calling heuristic_proc_desc.
-
-	* coffread.c (coff_symtab_read):  Change minimal symbol types
-	for C_LABEL symbols from mst_* to mst_file_*.
-
-	* config/m68k/sun3os4.mh (MMALLOC_CFLAGS): Define MMCHECK_FORCE to 1.
-
-	* configure.in:  Handle error message from sun3 native ld when
-	configuring HLDFLAGS.
-	* configure:  Regenerated with autoconf.
-
-	* c-valprint.c (c_value_print):  Adjust value address by VALUE_OFFSET.
-	* cp-valprint.c (cp_print_value):  Prevent gdb crashes by making sure
-	that the virtual base pointer from an user object still points to
-	accessible memory.
-
-	* dbxread.c (dbx_symfile_init):  Initialize sym_stab_info to
-	clear the recently added header_files fields.
-	(dbx_symfile_finish):  Free hfiles[i].vector to avoid storage leak.
-
-Fri Nov  8 14:30:23 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>
-
-	* config/tm-sh.h: Added a missing comma in middle of
- 	REGISTER_NAMES list.
-
-Fri Nov  8 12:29:51 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* monitor.c: Fix some formatting and comments.
-
-	* remote-sim.c (simulator_command): Set up callbacks before
-	entering the simulator.
-
-Thu Nov  7 15:19:08 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
-
-	* d10v-tdep.c: Fix some problems with inferior function calls.
-	* config/d10v/tm-d10v.h (EXTRA_FRAME_INFO): Change dummy to be
-	a pointer to the dummy's stack instead of just a flag.
-	
-Tue Nov  5 10:21:02 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>
-
-	* m32r-tdep.c: Improved frame_chain and fn prologue analysis.
-	* config/tm-m32r.h: Add framesize and register to extra_frame_info.
-
-Tue Nov  5 10:08:07 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* mswin/gdbwin.h:  Remove bogus definition of CORE_ADDR.
-	* mswin/srcwin.cpp (CSrcScroll1::CSrcScroll1):  Initialize depth
-	to fix divide-by-zero problem with clicking on source window.
-
-Mon Nov  4 00:48:37 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* mswin/recordit:  Fix problem with absolute paths.
-	* mswin/recordit:  Fix problem with relative paths.
-
-Sun Nov  3 18:06:42 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* mswin/{Makefile.in configure configure.in}:  New files for
-	configuring wingdb under Unix.
-
-Sat Nov  2 03:54:13 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
-
-	* irix5-nat.c, osfsolib.c, solib.c (symbol_add_stub):  Handle
-	missing or zero-sized .text sections properly.
-	* mdebugread.c:  Handle scRConst and scSUndefined storage classes.
-	* stabsread.c (scan_file_globals):  Try to resolve symbols
-	for shared libraries from the minimal symbol table of the main
-	executable first.
-
-Fri Nov  1 13:59:28 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
-
-	* d10v-tdep.c, config/d10v/tm-d10v.h:  Major fixes to support
-	inferior function calls and proper stack backtracing on D10V-EVA
-	board.
-
-Fri Nov  1 10:50:51 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* config/powerpc/linux.mh (NATDEPFILES): Fix up things so that it
-	links.
-	(GDBSERVER_DEPFILES,TERMCAP): Ditto.
-
-	* monitor.c (dev_name,targ_ops): Move static variables before
-	first use, to avoid compiler warnings.
-
-Thu Oct 31 16:37:17 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>
-
-	* m32r-tdep.c: Improved frame_chain and fn prologue analysis.
-	* configure.tgt: Add entry for m32r target.
-	* monitor.h:   Add a flag to tell monitor_store_register to use
-			(val, regno) instead of (regno, val).
-	* monitor.c:   Make monitor_store_register honor the above flag.
-			Make monitor_exp ignore DC1/DC3 for m32r.
-			Increase buf size in monitor_dump_regs.
-
-Wed Oct 30 18:14:14 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>
-
-	* m32r-tdep.c, m32r-rom.c: New files.
-	* config/m32r/m32r.mt: New file.
-	* config/m32r/tm-m32r.h: New file.
-
-Tue Oct 29 16:56:01 1996  Geoffrey Noer  <noer@cygnus.com>
-
-	* config/i386/xm-cygwin32.h:
-	* config/powerpc/xm-cygwin32.h:
-	add #define LSEEK_NOT_LINEAR so source lines aren't unexpectedly
-	truncated.
-
-Tue Oct 29 18:36:43 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* config/powerpc/tm-ppc-eabi.h (TARGET_BYTE_ORDER_SELECTABLE):
-	Define.
-
-Tue Oct 29 14:59:20 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* TODO: Add item suggesting an "info bfd" command.
-
-Tue Oct 29 12:48:04 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
-
-	* d10v-tdep.c: Snapshot that supports D10V-EVA board.
- 	
-	* config/d10v/tm-d10v.h (REGISTER_NAMES): Add imap0,imap1,dmap.
-	(TARGET_READ_FP,TARGET_WRITE_FP): Define. 
-	
-Mon Oct 28 17:34:24 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* mswin/genmakes mswin/recordit:  New scripts to generate make
-	files for MSVC.
-
-Sun Oct 27 20:18:04 1996  Mark Alexander  <marka@cygnus.com>
-
-	* config/mips/{tm-vr5000.h,tm-vr5000el.h,vr5000.mt,vr5000el.mt}:
-	New files.
-	* configure.tgt: Modify cases for vr5000 to use new files.
-
-Sat Oct 26 07:15:14 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
-
-	* config/alpha/alpha-osf3.mh (XM_CLIBS):  Add -lm for OSF/1-4.0.
-
-	* procfs.c (proc_set_exec_trap):  Under Alpha OSF/1-4.0, tracing
-	the entry to the exit system call to detect termination of the
-	inferior stopped working. Trace termination of the inferior via
-	PRFS_STOPTERM instead.
-	(procfs_init_inferior):  Do not trace entry to exit system call
-	if PIOCSSPCACT is defined.
-	(procfs_wait):  Handle PR_DEAD event, which signals the termination
-	of the inferior if PRFS_STOPTERM is set.
-
-	* mdebugread.c (parse_partial_symbols):  Ignore stNil section
-	start address symbols.
-
-	* sparc-tdep.c (get_saved_register):  Get saved PC from the
-	frame info if not in innermost frame.
-
-Thu Oct 24 10:51:45 1996  Mark Alexander  <marka@cygnus.com>
-
-	* dbxread.c (process_one_symbol): Interpret end-of-function
-	markers correctly; this fixes problem on Vr5000 where all
-	functions in a module had the same address.
-	* configure.in, configure.tgt, configure.host, gdbserver/configure.in:
-	Correct	for pc-linux-gnu problem in config.guess.
-	* configure: Regenerate.
-
-Thu Oct 24 10:06:58 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* dbxread.c:  Don't swap symbols in place, since internal and
-	external forms may have different sizes.  Don't assume that an
-	internal_nlist has the same layout as an external_nlist.  Create
-	symbol for n_strx element so to hide specifics of nlist from
-	partial-stab.h. 
-	* partial-stab.h:  Don't reference dbxread symbols directly.  Use
-	CUR_SYMBOL_STRX instead.
-	* config/i386/xm-windows.h:  Define SIGQUIT and SIGTRAP.
-
-	* config/v850/tm-v850.h:  Define PS_REGNUM and TARGET_V850 for
-	MSVC builds.
-	* mswin/gdbwin.c (reg_order):  Define register order for V850.
-	* mswin/gui.cpp (CGuiApp::InitInstance):  Define target name for
-	V850.
-	* mswin/regdoc.h:  Define MAXREGS for V850.
-
-Tue Oct 22 16:28:20 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* v850-tdep.c (scan_prologue):  Changes to deal with scheduled
-	prologues correctly.  First, prologue end is now defined by
-	presence of a branch, jump or call insn.  Second, can no longer
-	fix frame offsets because we may not know the offset until after a
-	register has been saved.
-	* (v850_init_extra_frame_info):  Fixup frame offsets here because
-	we have all the info at this time.
-	* (v850_frame_chain):  Use new calling convention for scan_prologue.
-
-Tue Oct 22 10:25:29 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
-
-	* d10v-tdep.c, config/d10v/tm-d10v.h: Changes to allow stack
- 	backtraces and inferior function calls.
-
-Tue Oct 22 10:32:46 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* mpw-make.sed: Update init.c editing to work with Oct 8 change.
-	(@HLDFLAGS@): Always edit out.
-
-Mon Oct 21 18:17:08 1996  Mark Alexander  <marka@cygnus.com>
-
-	* mdebugread.c (parse_partial_symbols): Fix 64-bit
-	sign-extension problems in calculating psymtab addresses.
-	* buildsym.c (end_symtab): Use macro to pop context.
-
-Mon Oct 21 14:40:50 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* v850-tdep.c:  Cleanup lots of things.  Add many comments.
-
-	* v850-tdep.c (v850_init_extra_frame_info v850_frame_chain):  Fix
-	sign bugs with scanning prologues.  Get a little smarter about
-	calculating the length of uninteresting instructions.
-
-Mon Oct 21 14:01:38 1996  Michael Snyder  <msnyder@cleaver.cygnus.com>
-
-	* top.c: Add new commands "set annotate" and "show annotate".
-	
-Sun Oct 20 04:38:39 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
-
-	* corelow.c (core_close):  Clear inferior_pid only if there is
-	an open core_bfd.
-
-	* cp-valprint.c (cp_print_value_fields):  Pass correct address
-	to val_print, not 0.
-
-	From Andreas Schwab (schwab@issan.informatik.uni-dortmund.de):
-	* eval.c (evaluate_subexp_standard) [case BINOP_REPEAT]: Chase
-	typedefs before checking for integral type of right operand.
-
-Fri Oct 18 17:26:22 1996  Mark Alexander  <marka@cygnus.com>
-
-	* mdebugread.c (parse_symbol): Fix crash when malloc has
-	no type info and void type has no associated pointer type.
-
-Thu Oct 17 18:18:20 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* configure.host: New file, host configuration mapping.
-	* configure.tgt: New file, target configuration mapping.
-	* configure.in: Remove host and target mapping.
-	* configure: Rebuild.
-
-Wed Oct 16 17:46:03 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* breakpoint.c (must_shift_inst_regs): New global.
-	(bpstat_stop_status): Change #if uses of DECR_PC_AFTER_BREAK into
-	equivalent expression uses.
-	* infrun.c (wait_for_inferior): Ditto.
-
-Wed Oct 16 01:53:43 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* v850-tdep.c (v850_push_arguments):  Use symbolic names for arg
-	registers.
-	* config/v850/tm-v850.h:  Change FP to 29.  Define arg regs.
-
-Tue Oct 15 16:30:07 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* Makefile.in (init.c):  Don't use -s option with grep.  It means
-	something different under Digital Unix.
-
-	* buildsym.c (finish_block):  Treat LOC_BASEREG_ARG and
-	LOC_LOCAL_ARG as arguments so that GDB will know about function
-	args declared this way.  Mostly affects dwarf.
-	* dwarfread.c (decode_die_type):  Change default type from int to
-	void.  This allows GDB to recognize void functions.
-	* (new_symbol):  If AT_PROTOTYPED is present, set a flag in the
-	type structure.
-	* findvar.c (extract_floating store_floating):  Clean up comments
-	to reflect reality.
-	* gdbtypes.h:  Add TYPE_FLAG_PROTOTYPED so that we can tell if a
-	function has a prototype.  Currently, only dwarf supports this.
-	* utils.c (floatformat_from_doublest):  Fix logic error with
-	converting from double to float.  (It wasn't shifting mant_long if
-	it had a hidden bit.)
-	* v850-tdep.c:  Add support for function calling.  Fix some
-	problems with debugging code w/o debug symbols.
-	* config/v850/tm-v850.h:  Ditto.
-
-Tue Oct 15 18:19:42 1996  Ian Lance Taylor  <ian@cygnus.com>
-
-	* utils.c: Always ensure that size_t is defined.  Check
-	HAVE_STDDEF_H rather than __STDC__
-	(xmalloc, xrealloc): Use size_t rather than long.
-
-Tue Oct 15 14:24:19 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
-
-	* config/powerpc/tm-ppc-eabi.h: Undefine NO_SINGLE_STEP so targets
-	can use single-step commands.
-
-Sun Oct 13 11:38:25 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
-
-	* stabsread.c (define_symbol):  If REG_STRUCT_HAS_ADDR is non-zero,
-	follow typedefs before checking TYPE_CODE for structures and unions.
-
-Fri Oct 11 15:43:54 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* frame.h:  Move definition of struct frame_saved_regs to before
-	struct frame to make it possible to use frame_saved_regs in
-	EXTRA_FRAME_INFO macro.
-
-	* v850-tdep.c config/v850/tm-v850.h:  Lotsa new functions and
-	macros to make frame operations (such as backtrace) work.
-
-Fri Oct 11 14:23:50 1996  Fred Fish  <fnf@cygnus.com>
-
-	* dbxread.c (process_one_symbol): Check for null string directly
-	rather than using strcmp against "".
-	* partial-stab.h: Ditto.
-
-Fri Oct 11 12:18:32 1996  Mark Alexander  <marka@cygnus.com>
-
-	* gdbserver/{gdbreplay.c,low-linux.c,remote-utils.c,utils.c}:
-	Make it compile on Linux and eliminate some warnings.
-
-Thu Oct 10 16:32:08 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* Makefile.in (init.c):  Fixup final sed script to work around
-	Linux bug with `p' operator.
-
-Wed Oct  9 18:02:48 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* remote-mips.c: Use the correct name everywhere (DDB) for NEC's
- 	VR4300 target.
-	(ddb_ops, pmon_ops): Fix the documentation strings.
-
-Wed Oct  9 07:42:44 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* Makefile.in (init.c):  Retro HPUX grep lacks -h option.  Strip
-	filenames with sed instead.
-
-Tue Oct  8 15:59:44 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* defs.h:  Remove decls of xmalloc and xrealloc.  There is a
-	conflicting definition in libiberty.h.
-
-Tue Oct  8 11:47:13 1996  Fred Fish  <fnf@cygnus.com>
-
-	* dbxread.c (dbx_symfile_read): Call free_pending_blocks rather
-	than poking global variable (which is now static).
-	* hpread.c (hpread_build_psymtabs): Ditto.
-	* os9kread.c (os9k_symfile_read): Ditto.
-	* xcoffread.c (xcoff_initial_scan): Ditto.
-
-	* buildsym.h (free_pending_blocks): Declare here.
-	(pending_blocks): Remove declaration of global symbol.
-	(free_pendings): Remove declaration of global symbol.
-	(make_blockvector): Declare here.
-	(record_pending_block): Declare here.
-	
-	* dstread.c (make_blockvector): Remove static copy that was old
-	clone of version in buildsym.c.
-	(process_dst_block): Call record_pending_block rather than doing
-	it by hand.
-	(read_dst_symtab): Ditto.
-
-	* buildsym.c (make_blockvector): Make global rather than static,
-	(record_pending_block): New function, code moved from finish_block.
-	(finish_block): Use record_pending_block.
-	(free_pending_blocks): New function.
-	(really_free_pendings): Call free_pending_blocks.
-	(pending_blocks): Make static instead of global.
-	(free_pendings): Make static instead of global.
-	
-Tue Oct  8 09:03:22 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* config/i386/windows.mh config/i386/xm-windows.h::  New config
-	files to support building Wingdb (built under Microsoft build
-	environment).
-
-	* Makefile.in:  Add rule for hpux-thread.o (needs special header
-	files).
-	* (SUBDIRS):  Remove mswin.
-	* Change procedure for creating init.c.  Speeds things up quite a
-	bit.
-	* config.in configure configure.in:  Check for select, poll.
-	* Check for OSF header files before including hpux-thread.o.
-	* Don't configure doc or testsuite when building under MSVC.
-	* findvar.c value.h (read_register_pid write_register_pid):  Make
-	global.  Needed for hppa-tdep.c.
-	* (supply_register):  Don't set pid to inferior_pid when supplying
-	registers.
-	* hppa-tdep.c (saved_pc_after_call):  frame_saved_pc ->
-	FRAME_SAVED_PC.
-	* (frame_saved_pc):  Change name to hppa_frame_saved_pc.
-	* (hppa_pop_frame):  Don't use a pid of 0 with target_write_pc.
-	Use write_pc instead, which uses the correct pid.
-	* (target_read_pc target_write_pc):  Use read/write_register_pid
-	instead of read/write_register to preserve the pid passed in.
-	* inftarg.c (child_can_run):  Add flag child_suppress_run to allow
-	hpux-threads.c to override this as a runnable target.
-	* config/pa/nm-hppah.h:  Define target_new_objfile and
-	target_pid_to_str.
-	* config/pa/tm-hppa.h (FRAME_SAVED_PC):  Use hppa_frame_saved_pc
-	instead of frame_saved_pc.
-	* config/m68k/tm-m68k.h:  Define TARGET_M68K for Wingdb.
-	* config/m68k/tm-monitor.h:  Use FRAME_CHAIN_VALID_ALTERNATE, since
-	we can't easily determine the start file bounds with ELF.
-	* config/mips/tm-mips.h:  Define TARGET_MIPS for Wingdb.
-	* hpux-thread.c:  New file for HPUX/OSF thread support.
-	* osf-share/{README AT386/cma_thread_io.h HP800/cma_thread_io.h
-	RIOS/cma_thread_io.h cma_attr.h cma_deb_core.h cma_debug_client.h
-	cma_errors.h cma_handle.h cma_init.h cma_list.h cma_mutex.h
-	cma_sched.h cma_semaphore_defs.h cma_sequence.h cma_stack.h
-	cma_stack_int.h cma_tcb_defs.h cma_util.h}:  New files for OSF
-	thread support.
-
-Sun Oct  6 15:48:09 1996  Fred Fish  <fnf@cygnus.com>
-
-	* buildsym.c (finish_block): Change innerblock_anon_complaint to
-	print the addresses as part of the complaint.  Add a complaint for
-	cases where the block end address is smaller than the block start
-	address, in case any such conditions slip through our fixup mechanism.
-	* symmisc.c (dump_symtab): Only print blockvector for primary
- 	symtabs, to avoid massive duplication of output due to secondary
- 	symtabs that point to same blockvector.  Also do some minor 
-	formatting tweaks.
-
-Mon Oct  7 10:42:32 1996  Per Bothner  <bothner@deneb.cygnus.com>
-
-	Replace header_files global by per-objfile field.
-	* gdb-stabs.h (struct dbx_symfile_info):  Add fields header_files,
-	n_header_files, n_allocated_header_files.
-	* stabsread.h (header_files, n_header_files, n_allocated_header_files):
-	Replace externs by macros HEADER_FILES, N_HEADER_FILES, and
-	N_ALLOCATED_HEADER_FILES.
-	* dbxread.c (dbx_symfile_finish):  Free HEADER_FILES.
-	(free_header_files, init_header-files):  Don't free/init headerfiles.
-	(various functions):  Use macros instead of header_files globals.
-	* stabsread.c (various functions):  Likewise.
-
-Sun Oct  6 22:43:06 1996  Jason Merrill  <jason@yorick.cygnus.com>
-
-	* dwarf2read.c (read_tag_reference_type): New fn.
-	(read_type_die): Call it.
-	(dwarf_attr): Also look in the DIEs referred to by specification
- 	or abstract_origin attributes.
-
-Wed Oct  2 22:07:16 1996  Fred Fish  <fnf@cygnus.com>
-
-	* inferior.h (IN_SIGTRAMP): Pass pc to SIGTRAMP_START and
-	SIGTRAMP_END.
-	* config/i386/tm-i386os9k.h (SIGTRAMP_START, SIGTRAMP_END): 
-	Define with dummy pc arg.
-	* config/m68k/tm-nbsd.h: Ditto.
-	* doc/gdbint.texinfo: Document that SIGTRAMP_START and
-	SIGTRAMP_END are macros that take an single argument.
-
-Mon Sep 30 20:02:45 1996  Fred Fish  <fnf@cygnus.com>
-
-	* defs.h: Remove define of PRIVATE_XMALLOC.
-
-Mon Sep 30 15:39:28 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* config/v850/tm-v850.h:  Use distinct register for PC, not EIPC.
-
-Mon Sep 30 11:16:34 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* top.c (execute_control_command):  Free values from while_control
-	and if_control conditions after evaluation to avoid storage leaks.
-	From Peter Schauer.
- 
-Fri Sep 27 17:43:06 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* configure configure.in:  Recognize v850 target.
-	* v850-tdep.c:  New file, NEC V850 target support.
-	* config/v850/{v850.mt tm-v850.h}:  New files for NEC V850 support.
-
-Fri Sep 27 14:48:15 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
-
-	* infrun.c (wait_for_inferior):  Update current_line and
-	current_symtab when stepping continues in the middle of a new line.
-
-Fri Sep 27 10:25:30 1996  Fred Fish  <fnf@cygnus.com>
-
-	* top.c (print_gdb_version): Rewrote to comply with new GNU coding
-	standards for the --version option.
-	(print_gnu_advertisement): Remove, now part of print_gdb_version.
-	(show_version): Remove call to print_gnu_advertisement.
-	* top.h (print_gnu_advertisement): Remove prototype.
-	* main.c (print_gdb_help): Move help to static function and
-	add prototype.
-	(main): Call print_gdb_help rather than inlining it.
-	(main): Remove call to print_gnu_advertisement.
-	
-Fri Sep 27 13:32:53 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* config/d10v/tm-d10v.h (TARGET_{INT,PTR}_BIT): Define.
-	(TARGET_{,LONG_}DOUBLE_BIT): Ditto.
-
-Thu Sep 26 23:10:26 1996  Mark Alexander  <marka@cygnus.com>
-
-	* configure.in, config/i386/tm-linux.h: Fix configure
-	problem on older Linux systems that prevented core files
-	from being recognized.
-
-Wed Sep 25 18:31:33 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* dbug-rom.c: New file, support for Motorola's dBUG monitor.
-	* config/m68k/monitor.mt (TDEPFILES): Add it.
-	* NEWS: Mention it.
-
-Mon Sep 23 16:13:50 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
-
-	* config/d10v/tm-d10v.h (SAVED_PC_AFTER_CALL): Fixed.  
-	Now single-steps correctly.
-	* d10v-tdep.c (d10v_pop_frame): Fixed.
-
-Fri Sep 20 16:10:58 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* config/sh/tm-sh.h (REGISTER_NAMES): Move fp registers to
-	be consistent with GCC.
-	(FPUL_REGNUM, etc): Renumber to match list changes.
-	(ADDR_BITS_REMOVE): Delete.
-	* sh-tdep.c (sh_reg_names, sh3_reg_names, sh3e_reg_names):
-	Rearrange to match REGISTER_NAMES.
-	* sh3-rom.c (sh3_regnames, sh3e_regnames): Ditto.
-
-Thu Sep 19 16:19:01 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
-
-	* d10v-tdep.c:  Stack chain should work now. 
-
-Tue Sep 17 18:46:57 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
-
-	* d10v-tdep.c, config/d10v/tm-d10v.h: Snapshot. 
-
-Tue Sep 17 12:20:50 1996  Ian Lance Taylor  <ian@cygnus.com>
-
-	* configure.in: Add cases for MIPS 5000 like MIPS 4300.
-	* configure: Rebuild.
-
-Tue Sep 17 12:09:00 1996  Dawn Perchik <dawn@critters.cygnus.com>
-
-	* ser-e7kpc.c: Added wingdb support for target e7000pc.
-
-Tue Sep 17 10:56:52 1996  James G. Smith  <jsmith@cygnus.co.uk>
-
-	* remote-mips.c (pmon_wait): DDB PMON does not require forced
- 	re-entry back into debug mode.
-
-Mon Sep 16 14:32:58 1996  James G. Smith  <jsmith@cygnus.co.uk>
-
-	* remote-mips.c (mips_load): Ensure that the PC is explicitly
- 	loaded after a load to a DDB PMON system.
- 	
-Fri Sep 13 12:02:39 1996  Fred Fish  <fnf@cygnus.com>
-
-	* Makefile.in (INTERNAL_LDFLAGS): Add @HLDFLAGS@ to list.
-	(HLDENV): Set to @HLDENV@.
-	(gdb): Prefix link command line with $(HLDENV).
-	* configure.in: Add support to test for --enable-shared and
-	generate appropriate values for HLDFLAGS and HLDENV.
-	* configure: Regenerated with autoconf.
-
-Sun Sep  8 15:26:27 1996  Fred Fish  <fnf@cygnus.com>
-
-	* alpha-nat.c (fetch_core_registers): Match Sep 4 gdbcore.h prototype
-	change for core_read_registers in struct core_fns.
-	* core-regset.c (fetch_core_registers): Ditto & add prototype.
-	* core-sol2.c (fetch_core_registers): Ditto & add prototype.
-	* i386aix-nat.c (fetch_core_registers): Ditto & add prototype.
-	* i386b-nat.c (fetch_core_registers): Ditto.
-	* i386mach-nat.c (fetch_core_registers): Ditto & add prototype.
-	* irix4-nat.c (fetch_core_registers): Ditto.
-	* irix5-nat.c (fetch_core_registers): Ditto.
-	* lynx-nat.c (fetch_core_registers): Ditto & add prototype.
-	* m68knbsd-nat.c (fetch_core_registers): Ditto.
-	* mips-nat.c (fetch_core_registers): Ditto & add prototype.
-	* rs6000-nat.c (fetch_core_registers): Ditto.
-	* sparc-nat.c (fetch_core_registers): Ditto.
-	* sun3-nat.c (fetch_core_registers): Ditto & add prototype.
-	* ultra3-nat.c (fetch_core_registers): Ditto & add prototype.
-
-	* alpha-nat.c (register_addr): Match Sep 4 gdbcore.h prototype change.
-	* delta68-nat.c (register_addr): Ditto.
-	* gdbserver/low-linux.c (register_addr): Ditto.
-	* gdbserver/low-hppabsd.c (register_addr): Ditto.
-	* i386m3-nat.c (register_addr): Ditto.
-	* mips-nat.c (register_addr): Ditto.
-	* ultra3-nat.c (register_addr): Ditto.
-
-Sun Sep  8 15:14:00 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* blockframe.c (inside_main_func):  Cleanup slightly.  Move
-	mainsym def into the block it's used in.
-	* configure.in configure:  Allow NATDEPFILES to be recognized in
-	.mh files regardless of whitespace.
-
-	* cpu32bug-rom.c (cpu32bug_cmds):  Change load_response string to
-	keep downloads from hanging.
-
-	* remote-wiggler.c:  Add support for flash upgrades.
-	* (wiggler_error):  Fix message format.  Add new error code.
-	* (wiggler_write_byets):  Error code is hex.  Report errors with
-	proper routine name.
-	* (wiggler_read_byets):  Report errors with proper routine name.
-	* (get_packet):  Add support for new flash commands.
-	* (wiggler_load):  Call clear_symtab_users() to reset things
-	properly after download.
-	* (flash_xfer_memory bdm_update_flash_command):  New funxtions to
-	support flash upgrades for Wiggler.
-	* (_initialize_remote_wiggler):  Add `bdm update-flash' command.
-
-Fri Sep  6 13:14:13 1996  Geoffrey Noer  <noer@cygnus.com>
-
-	* ser-tcp.c: don't include netinet/tcp.h if __CYGWIN32__
-
-Thu Sep  5 17:05:13 1996  Geoffrey Noer  <noer@cygnus.com>
-
-	* config/i386/cygwin32.mh:
-	* config/powerpc/cygwin32.mh: build ser-tcp.o for both hosts
-
-Thu Sep  5 12:09:13 1996  Per Bothner  <bothner@deneb.cygnus.com>
-
-	* value.h (COERCE_REF):  Fix previous change.
-	(COERCE_ENUM):  Add a check_typedef  (this is the real fix).
-
-Thu Sep  5 03:28:30 1996  Wilfried Moser  <moser@rtl.cygnus.com>
-
-	* eval.c (evaluate_subexp_standard): In case of OP_ARRAY: make a
-	better check of array boundaries.
-
-Thu Sep  5 01:29:42 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* configure:  Update aclocal.m4 and re-run autoconf to get correct
-	defs for BFD stuff.
-	* remote-wiggler.c (wiggler_error):  Error codes are hex.  Also,
-	fix default message generation.
-
-Wed Sep  4 17:28:40 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* Makefile.in:  Add mswin to SUBDIRS.  Add rules for
-	mswin/libwingdb.a and remote-wiggler.o.
-	* breakpoint.c (breakpoint_here_p):  Clean up bp enabled test.
-	* (breakpoint_inserted_here_p):  New func, just like
-	breakpoint_here_p, except it's honest.  Honestly.
-	* breakpoint.h:  Proto for above.
-	* configure configure.in:  Add mswin to configdirs if host is
-	i[3456]86-*-windows.
-	* core-aout.c (fetch_core_registers register_addr) gdbcore.h:
-	Change all vars that can contain addresses to type CORE_ADDR.
-	* findvar.c (supply_register):  Allow val to be NULL.  This means
-	that regno is unsupported.
-	* (read_pc read_pc_pid write_pc write_pc_pid):  Make non-pid forms
-	just call pid forms with inferior_pid so that there's only once
-	place to hack PC's and such.
-	* infrun.c (proceed):  Don't skip breakpoints if user changed PC.
-	* remote-wiggler.c:  New file.  Support for BDM interface from
-	Macraigor Systems.
-	* serial.c:  Enhance serial logging capability.  Add hex and octal
-	output modes (set remotelogbase {hex|octal|ascii}.  Also log
-	breaks, timeouts, errors, and eofs.
-	* serial.h:  Redefine SERIAL_SEND_BREAK to go through a wrapper
-	function so that we can log breaks.  Don't export serial_logfile
-	or serial_logfp.
-	* top.c (execute_command):  Don't test for serial_logfp here.
-	Just call serial_log_comand, and let serial.c sort it out.
-	* valops.c (value_of_variable):  Don't attempt to establish frames
-	for static and global variables.  This makes things work a bit
-	better if the stack or frame pointer is trashed.
-	* config/m68k/monitor.mt (TDEPFILES):  Add remote-wiggler.o.
-	* config/m68k/tm-m68k.h:  Define STACK_ALIGN.  CPU32 can't hack
-	misaligned stacks during function calls.
-
-Wed Sep  4 13:06:26 1996  Ian Lance Taylor  <ian@cygnus.com>
-
-	* terminal.h: Don't use #elif.
-
-Wed Sep  4 06:49:35 1996  Wilfried Moser  <moser@rtl.cygnus.com>
-
-	* ch-exp.c (parse_tuple_element): Allow (*): for array tuples
-	if we have a type.
-
-	* eval.c (evaluate_subexp_standard): In case of OP_ARRAY:
-	check number of args against bounds of array to avoid
-	memory corruption.
-
-	* value.h (COERCE_REF): Do a CHECK_TYPEDEF in case we get
-	a TYPE_CODE_TYPEDEF.
-
-Fri Aug 30 15:07:14 1996  James G. Smith  <jsmith@cygnus.co.uk>
-
-	* remote-mips.c: Provide support for DDBVR4300 target board.
-	(ddb_open, ddb_ops): Added.
-	(mips_monitor_type): MON_DDB Added.
-	(mips_enter_debug, mips_exit_debug, mips_initialize,
- 	mips_fetch_registers, common_breakpoint, mips_load,
- 	_initialize_remote_mips): Updated.
-
-Thu Aug 29 17:00:18 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* nlm/configure.in (i[345]86-*-*): Recognize i686 for pentium pro.
-	* nlm/configure: Regenerate.
-
-	* gdbserver/configure.in (i[345]86-*-*): Recognize i686 for
-	pentium pro.
-
-Wed Aug 28 13:11:15 1996  Ian Lance Taylor  <ian@cygnus.com>
-
-	* configure.in: If CY_AC_PATH_TCLCONFIG can't find TCL, don't run
-	CY_AC_LOAD_TCLCONFIG.
-	* configure: Rebuild.
-
-Tue Aug 27 12:40:40 1996  Fred Fish  <fnf@cygnus.com>
-
-	* infrun.c (wait_for_inferior): Initialize stop_func_end before calling
-	find_pc_partial_function.
-
-Tue Aug 27 10:17:34 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* configure: Regenerate again.
-
-Tue Aug 27 04:25:08 1996  Geoffrey Noer  <noer@cygnus.com>
-
-        * configure.in: work around host_alias configure bug.
-        AC_CANONICAL_HOST is called twice (first by AC_CHECK_TOOL
-        and second by AC_CANONICAL_SYSTEM).  The second clobbers the
-        previous setting.  Circumventing by moving the second check
-        to before the first.
-	* configure: regenerated
-
-Mon Aug 26 18:36:54 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
-
-	* config/d10v/d10v.mt: New file.
-	* config/d10v/tm-d10v.h: New file.	
-	* configure.in: New target D10V.	 
-	* d10v-tdep.c: New file. 
-
-Sun Aug 25 00:09:47 1996  Fred Fish  <fnf@rtl.cygnus.com>
-
-	* rs6000-tdep.c: Fix typo in comment.
-	* valops.c (call_function_by_hand): Set using_gcc to 2
-	for code compiled without -g, per comment in code.
-	* config/a29k/tm-a29k.h (STACK_ALIGN): Add comment.
-	* config/sparc/tm-sparc.h (STACK_ALIGN): Add comment.
-	* config/sparc/tm-sp64.h (STACK_ALIGN): Add comment.
-	* config/pyr/tm-pyr.h (STACK_ALIGN): Add comment.
-	* config/m88k/tm-m88k.h (STACK_ALIGN): Add comment.
-	* config/pa/tm-hppa.h (PUSH_ARGUMENTS): Enclose args in ()'s.
-	(STACK_ALIGN): Add comment, move to be with other associated
- 	macros, and document.
-	* config/mips/tm-mips.h (PUSH_ARGUMENTS): Enclose args in ()'s.
-	(STACK_ALIGN): Remove completely, handled by PUSH_ARGUMENTS.
-	* config/alpha/tm-alpha.h (PUSH_ARGUMENTS): Enclose args in ()'s.
-	* config/rs6000/tm-rs6000.h (STACK_ALIGN): Remove completely,
-	handled by PUSH_ARGUMENTS.
-	(PUSH_ARGUMENTS): Enclose args in ()'s.
-	
-Fri Aug 23 13:55:05 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
-
-	* infrun.c (wait_for_inferior):  Try to reenable shared library
-	breakpoints even if auto_solib_load is not set.
-
-Wed Aug 21 16:31:27 1996  Fred Fish  <fnf@cygnus.com>
-
-	* valprint.c (print_longest): Test for CC_HAS_LONG_LONG as well as
-	PRINTF_HAS_LONG_LONG.
-	* expprint.c (dump_expression): Ditto.
-	* configure.in: Fix check for long long support in compiler to
-	use a function body, not a nested function.
-	* configure: Rebuild with autoconf.
-	
-Tue Aug 20 17:59:42 1996  Ian Lance Taylor  <ian@cygnus.com>
-
-	* aclocal.m4: Include ../bfd/aclocal.m4.
-	* configure.in: Add stdlib.h to AC_CHECK_HEADERS.  Call
-	BFD_NEED_DECLARATION on malloc, realloc, and free.
-	* acconfig.h: Add NEED_DECLARATION_MALLOC,
-	NEED_DECLARATION_REALLOC, and NEED_DECLARATION_FREE.
-	* configure, config.in: Rebuild.
-	* defs.h: Include <stddef.h> and <stdlib.h> based on HAVE_*_H
-	rather than __STDC__.  Only declare malloc, realloc, and free if
-	NEED_DECLARATION_* is defined.
-
-Tue Aug 20 15:37:03 1996  Fred Fish  <fnf@cygnus.com>
-
-	* solib.c (_initialize_solib): Add missing '\' chars at ends of
- 	strings that continue on next line.
-	(enable_break): Replace "return 0" with setting success to zero
- 	and letting normal return handle the return.
-
-Sat Aug 17 14:16:23 1996  Fred Fish  <fnf@cygnus.com>
-
-	* mips-tdep.c (mips_push_arguments): Make sure sp and struct_addr
-	are properly aligned.
-
-Fri Aug 16 17:54:26 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* rs6000-tdep.c (rs6000_fix_call_dummy): Add full set of arguments.
-	* config/rs6000/tm-rs6000.h (FIX_CALL_DUMMY): Pass all arguments
-	to function, declare function correctly.
-
-Fri Aug 16 17:24:35 1996  Dawn Perchik <dawn@critters.cygnus.com>
-
-        * symtab.h: changed namespace to _namespace for compiling under 
-	MFC v4.0.
-
-Fri Aug 16 13:52:21 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* mpw-make.sed: Update for various recent changes, add some
-	comments.
-
-Fri Aug 16 15:47:36 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* config/rs6000/tm-rs6000.h (FIX_CALL_DUMMY): Cast args to be an
-	integer for type correctness.
-
-Fri Aug 16 15:15:37 1996  James G. Smith  <jsmith@cygnus.co.uk>
-
-	* config/mips/{vr4300.mt, vr4300el.mt} (SIM): Add -lm when
- 	simulator is included.
-
-Thu Aug 15 13:44:13 1996  Fred Fish  <fnf@cygnus.com>
-
-	* findvar.c (write_register_pid): Only needed when TARGET_WRITE_PC
-	is not defined.
-	(read_register_pid): Only needed when TARGET_READ_PC is not
-	defined.
-	* hppa-tdep.c (frame_saved_pc): Remove prototype.
-	* infptrace.c (udot_info): Prototype when CHILD_XFER_MEMORY is
-	not defined.
-	* config/xm-aix4.h (aix_resizewindow): Convert old style decl
-	to prototype.
-	* xcoffsolib.c (command.h): Include for needed prototypes.
-
-Wed Aug 14 17:54:19 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* config/i386/cygwin32.mh: Set NAT_FILE to nm-empty.h to make
-	native work.
-
-Wed Aug 14 02:03:42 1996  Fred Fish  <fnf@cygnus.com>
-
-	From Blair MacIntyre <bm@cs.columbia.edu>:
-	* hppa-tdep.c (hppa_fix_call_dummy): Use MSYMBOL_TYPE rather
-	than SYMBOL_TYPE on msymbols.
-	* somsolib.c (som_solib_create_inferior_hook): Ditto.
-
-	* Makefile.in (init.c):  Generate with prototypes.
-
-	* config/pa/tm-hppa.h (frame_saved_pc): Add prototype.
-	* config/rs6000/xm-rs6000.h (aix_resizewindow): Ditto.
-	* config/rs6000/tm-rs6000.h (frame_initial_stack_address): Ditto.
-	(pc_load_segment_name): Ditto.
-	(pop_frame): Ditto.
-	(extract_return_value): Ditto.
-	(is_magic_function_pointer): Ditto.
-	(push_dummy_frame): Ditto.
-	(fix_call_dummy): Ditto.
-	(push_arguments): Ditto.
-	(skip_trampoline_code): Ditto.
-	(aix_process_linenos): Ditto.
-
-	* config/m68k/tm-cisco.h (get_longjmp_target): Add prototype.
-	* config/m68k/tm-es1800.h: Ditto.
-	* config/m68k/tm-vx68.h: Ditto.
-	* config/m68k/tm-sun3.h: Ditto.
-	* config/m68k/tm-m68kv4.h: Ditto.
-
-Tue Aug 13 23:04:36 1996  Fred Fish  <fnf@cygnus.com>
-
-	* config/mips/nm-mips.h (get_longjmp_target): Add prototype.
-	* config/mips/nm-irix3.h (get_longjmp_target): Add prototype.
-	* remote-mips.c (mips_read_processor_type): Remove prototype.
-	* mips-tdep.c (gdb_print_insn_mips): Add prototype and make static.
-	* irix5-nat.c (fetch_core_registers): Add prototype.
-
-Mon Aug 12 21:23:44 1996  Fred Fish  <fnf@cygnus.com>
-
-	* remote-pa.c (boot_board): Add dummy params to make type compatible
- 	for passing to add_com.
-	* scm-exp.c (scm_lreadr): Ensure svalue is not used uninitialized.
-	* buildsym.c (compare_line_numbers): Change function to match
-	prototype and also what qsort expects.
-
-Mon Aug 12 19:19:00 1996  Mark Alexander  <marka@cygnus.com>
-
-	* remote.c: Make remote_write_size public.
-	* sh-tdep.c (_initialize_sh_tdep): Set remote_write_size to 300
-	to prevent packet errors with some versions of CMON.
-
-Mon Aug 12 16:20:58 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* defs.h:  Define CONST_PTR as blank if compiling with Microsoft
-	C, else it's `const'.
-	* c-lang.c c-lang.h ch-lang.c f-lang.c language.c m2-lang.c
-	scm-lang.c: Microsoft C can't hack const pointers.  Use CONST_PTR
-	macro instead.
-	* configure configure.in defs.h:  Use AC_C_CONST to figure out if
-	the compiler supports const.  Gets rid of some cruft in defs.h.
-	* dwarf2read.c:  <string.h> -> "gdb_string.h"
-	* remote-sim.c:  Add prototypes.  Fix call to gdbsim_kill.
-	* sparcl-tdep.c (download):  Add prototypes to write_routine and
-	start_routine args.
-
-	* mswin/gdbwin.c:  Don't include both varargs.h AND stdarg.h.  Get
-	rid of varargs.h  Include string.h.
-	* (gdbwin_update gdbwin_fputs regs_changed_f bpt_changed_f
-	update):  Fix prototypes, fix calls.
-	* (update):  Return value for catch_errors.
-	* (run_execute_command togdb_command_from_tty togdb_command):
-	Cleanup catching of errors from calls to execute_command.  Also,
-	dup command string to avoid modifying const strings.
-	* (togdb_breakinfo_i_init togdb_breakinfo_i_next):  Use 0 instead
-	of NULL when see if b->address isn't set.
-	* (bi_disable_bpt bi_enable_bpt bi_delete_all
-	bi_delete_breakpoint):  Add arg to calls to update.
-	* (gui_command):  Add prototype.
-	* (mswin_query):  Fix prototype.
-	* (_initialize_gdbwin):  Dup string to avoid modifying const.
-	* (info_path togdb_get_info_path):  Remove const from decls cuz
-	this can't be const (it points at malloc'ed memory).
-	* (togdb_searchpath):  Remove const from path.  Dup string to
-	avoid modifying const strings.
-	* rindex -> strrchr.
-	* (gdbwin_list_symbols):  Regexp param is const.
-	* Fix lots of refs to psymtabs to deref correct pointers.
-	* (togdb_set_breakpoint_sal):  Call set_breakpoint_sal with sal,
-	not &sal.
-	* mswin/gdbwin.h (togdb_searchpath togdb_get_info_path
-	toget_set_info_path):  Fix prototypes to match reality.
-	* mswin/gui.cpp:  Define _beginthreadex and _endthreadex routines
-	with proper prototypes.
-	* mswin/iface.cpp (gdbwin_fputs):  Define with correct number of args.
-	* mswin/ser-win32s.c:  Fix defs of min and max.
-	* mswin/serdll32.c (OpenComm16):  Make cbInQueue and cbOutQueue be
-	USHORT.
-	* (WriteComm16):  Change lpBug from LPVOID to LPCSTR.
-	* mswin/serdll32.h:  Fix prototypes for OpenComm16 and WriteComm16.
-
-Sun Aug 11 20:54:16 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* main.c (main):  Make sure command loop is used with cygwin32.
-	* terminal.h:  Allow cygwin32 to use termios.h.
-
-Fri Aug  9 12:42:49 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* somread.c (som_symtab_read): Handle secondary definition
-	symbols (aka weak symbols).
-
-	* config/tm-hppa.h (EXTRACT_RETURN_VALUE): Fix thinko in
-	last change.
-
-Thu Aug  8 10:12:36 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* symfile.c (symfile_bfd_open):  Change ifdef from __WIN32__ to
-	_WIN32.
-
-	* somread.c:  Rearrange order of includes to fix warnings under
-	hpux-10.10.  Also don't include sys/file.h.
-
-Wed Aug  7 21:45:52 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* dbxread.c:  Don't include param.h or sys/file.h.
-	* (dbx_symfile_read):  Determine symfile_relocatable from bfd
-	flags instead of file extension.  Also clean up a little bit.
-
-Wed Aug  7 17:18:37 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* dwarf2read.c dwarfread.c exec.c infcmd.c infrun.c main.c
-	mdebugread.c os9kread.c source.c top.c utils.c:  Don't
-	include param.h or sys/file.h (or unistd.h in some cases).
-	* defs.h exec.c inflow.c remote-array.c remote-e7000.c
-	sparcl-tdep.c terminal.h utils.c:  Replace all occurances of
-	__WIN32__, WINGDB, WIN32, etc... with _WIN32.
-	* main.c:  Remove #ifndef WINGDB around option processing.  Fix
-	bug with passing argc==0 and argv==NULL to getopt.
-	* (main) Remove calls to access() before source_command.  Let
-	soure_command handle access errors.
-	* maint.c (maintenance_dump_me):  #ifdef out for _WIN32.
-	* symtab.c (operator_chars):  Make this global for wingdb.
-	* top.c (disconnect):  #ifdef out for _WIN32.
-	* (source_command):  If got an error and from_tty, then call print
-	error, else just return quietly.
-	* utils.c (fatal_dump_core):  Can't kill ourselves under windows.
-	Just exit.
-	* (pollquit notice_quit):  #ifdef out stuff that doesn't exist
-	under windows. 
-
-Wed Aug  7 09:59:19 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* config/pa/tm-hppa.h (EXTRACT_RETURN_VALUE): Tweak for
-	structures > 4 bytes in size.
-
-	* valops.c (call_function_by_hand): Handle aligning stacks that
-	grow up correctly.
-	* config/pa/tm-hppa.h (USE_STRUCT_CONVENTION): Define.
-	(STACK_ALIGN): Define.
-	* hppa-tdep.c (hppa_alignof): Don't demand a minumim two byte
-	alignment on structs/unions.
-	
-Sun Aug  4 16:22:42 1996  Fred Fish  <fnf@cygnus.com>
-
-	* config/powerpc/nm-aix.h (PTRACE_ARG3_TYPE): Define to "int *",
-	which is the documented type under at least AIX 3 and AIX 4.
-	
-Sat Aug  3 04:02:46 1996  Fred Fish  <fnf@cygnus.com>
-
-	* config/alpha/alpha-osf3.mh (XM_FILE): Change from xm-alpha.h to
-	xm-alphaosf.h.
-	(MMALLOC_CFLAGS): Define NO_MMCHECK to not install consistency
-	checks.
-
-Thu Aug  1 10:11:34 1996  Fred Fish  <fnf@cygnus.com>
-
-	* config/mips/tm-mips.h (TM_MIPS_H): Enclose file contents in
-	this, define when contents are included.
-	(mips_read_processor_type): Add prototype.
-	* config/mips/xm-mips.h: Remove strdup decl, now in gdb_string.h
-	* mdebugread.c (ecoff_relocate_efi): Add prototype.
-	(fixup_sigtramp): Only needed when TM_MIPS_H is defined.
-
-Wed Jul 31 20:21:24 1996  Fred Fish  <fnf@cygnus.com>
-
-	* rs6000-nat.c (add_vmap): Return 0 to caller rather than random value.
-	(vmap_ldinfo): Ensure got_exec_file is not used uninitialized.
-	(fetch_core_registers): Add prototype.
-	(vmap_symtab): Ditto.
-	(objfile_symbol_add): Ditto.
-	(add_vmap): Ditto.
-	(vmap_ldinfo): Ditto.
-	(vmap_exec): Ditto.
-
-Tue Jul 30 17:57:46 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* stabsread.c (get_substring): Declare second arg as int.
-
-	* remote-es.c: Include gdb_string.h after defs.h.
-
-Mon Jul 29 21:13:20 1996  Fred Fish  <fnf@cygnus.com>
-
-	* rs6000-tdep.c (push_arguments): Remove unused variable "pc".
-	(branch_dest): Remove unused variable "offset".
-	(pop_dummy_frame): Add prototype and make static.
-	(push_arguments): Guard against using len uninitialized.
-	(push_arguments): Guard against using arg uninitialized.
-	(frame_saved_pc): Remove unused variable "frameless".
-	(free_loadinfo): Ifdef out unused function.
-
-	* xcoffread.c (compare_lte): Change prototype and function to
-	be correct type for passing to qsort.
-	(add_stab_to_list): Ifdef out unused function and prototype.
-	(compare_lte): Add prototype
-	(arrange_linetable): Ditto.
-	(record_include_begin): Ditto.
-	(record_include_end): Ditto.
-	(process_linenos): Ditto.
-	(xcoff_next_symbol_text): Ditto.
-	(scan_xcoff_symtab): Ditto.
-	(xcoff_initial_scan): Ditto.
-
-	* mips-tdep.c (mips_read_processor_type): Add parens around
-	bitwise-and operands in comparison; previous expression always
-	evaluated to 0 because of equality comparison of two constants.
-
-	* rs6000-tdep.c (skip_prologue): Add missing parens around
-	operands of logical-or so that first operand does not bind
-	to previous logical-and.
-
-	* configure.in: Expand "long long" test to include code that triggers
-	known problem on HPUX with native compiler.
-	(configure): Regenerated.
-
-Mon Jul 29 18:12:27 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* somsolib.c (som_solib_create_inferior_hook): Don't
-	warn if __d_pid can't be found.
-
-Sun Jul 28 10:46:39 1996  Fred Fish  <fnf@cygnus.com>
-
-	* config/mips/tm-mips.h (struct frame_info): Forward decl.
-	(struct type): Ditto.
-	(struct value): Ditto.
-
-	* config/mips/tm-mips.h (sigtramp_address): Move extern decl
- 	from mips-tdep.c to here.
-	(sigtramp_end): Ditto.
-	(fixup_sigtramp): Ditto.
-
-	* config/mips/tm-mips.h (init_extra_frame_info): Add prototype.
-	(mips_frame_chain): Ditto.
-	(mips_step_skips_delay): Ditto.
-	(mips_frame_saved_pc): Ditto.
-	(mips_find_saved_regs): Ditto.
-	(mips_frame_num_args): Ditto.
-	(mips_pop_frame): Ditto.
-	(mips_extract_return_value): Ditto.
-	(mips_store_return_value): Ditto.
-	(mips_push_dummy_frame): Ditto.
-	(mips_push_arguments): Ditto.
-	(mips_do_registers_info): Ditto.
-	(ecoff_relocate_efi): Ditto.
-	(ecoff_relocate_efi): Ditto.
-	* irix4-nat.c (fetch_core_registers): Add prototype.
-	* mips-tdep.c (read_next_frame_reg): Add prototype
-	(heuristic_proc_start): Ditto.
-	(heuristic_proc_desc): Ditto.
-	(mips_print_register): Ditto.
-	* config/mips/nm-irix5.h (procfs_set_watchpoint): Add prototype.
-	(procfs_stopped_by_watchpoint): Ditto.
-	* config/mips/nm-irix4.h (procfs_set_watchpoint): Add prototype.
-	(procfs_stopped_by_watchpoint): Ditto.
-	* config/alpha/tm-alpha.h (ecoff_relocate_efi): Add prototype.
-	(struct symbol): Add forward decl for prototype.
-
-	* breakpoint.c (internal_breakpoint_number): Only needed if
-	GET_LONGJMP_TARGET or SOLIB_ADD is defined.
-
-	* objfiles.c (ecoff_relocate_efi): Remove prototype.
-
-Sat Jul 27 17:47:35 1996  Fred Fish  <fnf@cygnus.com>
-
-	* configure.in: Add test for "long long" support.
-	* configure: Regenerate with autoconf.
-	* acconfig.h: Add CC_HAS_LONG_LONG
-	* config.in: Regenerate with autoheader.
-	* config/mips/tm-mips64.h (FORCE_LONG_LONG): Remove
-	* config/sparc/tm-sp64.h (CC_HAS_LONG_LONG): Remove.
-	* config/mips/tm-vr4300el.h (CC_HAS_LONG_LONG): Remove.
-	* config/mips/tm-vr4300.h (CC_HAS_LONG_LONG): Remove.
-	* config/mips/xm-irix5.h (CC_HAS_LONG_LONG): Remove
-	(PRINTF_HAS_LONG_LONG): Remove.
-	(FORCE_LONG_LONG): Remove.
-	* config/powerpc/xm-aix.h (UINT_MAX): Undef and use gdb's version.
-	* config/convex/xm-convex.h (CC_HAS_LONG_LONG): Remove
-	(PRINTF_HAS_LONG_LONG): Remove.
-	* config/xm-nbsd.h (CC_HAS_LONG_LONG): Remove.
-	(PRINTF_HAS_LONG_LONG): Remove.
-	* config/pa/tm-hppa.h (GET_FIELD): Put parens around
-	subtraction inside shift.  Put parens around subtraction
-	in operand of bitwise and.
-	(struct frame_info): Forward declare
- 	if __STDC__ defined.
-	(frame_saved_regs): Ditto.
-	(struct value): Ditto.
-	(struct type): Ditto.
-	(struct inferior_status): Ditto.	
-	(init_extra_frame_info): Add prototype.
-	(skip_prologue): Ditto.
-	(frameless_function_invocation): Ditto.
-	(frame_chain): Ditto.
-	(frame_chain_valid): Ditto.
-	(saved_pc_after_call): Ditto.
-	(hppa_fix_call_dummy): Ditto.	
-	(hppa_push_arguments): Ditto.
-	(pa_do_registers_info): Ditto.
-	(in_solib_call_trampoline): Ditto.
-	(in_solib_return_trampoline): Ditto.
-	(push_dummy_frame): Ditto.
-	* convex-tdep.c (decout): Use print_longest rather than
-	fprintf_filtered.
-	* defs.h: Remove use of FORCE_LONG_LONG and __GNUC__ to set
-	CC_HAS_LONG_LONG.
-	(INT_MIN): Fix so it works correctly when assigned to a long long.
-	* valprint.c (longest_to_int): Rewrite to remove dependence
-	on INT_MIN and INT_MAX.
-	(print_longest): Rewrite the code that falls back to synthesized
-	hex output when LONGEST value is not representable as in a long and
- 	printf doesn't support printing long longs.
-	* ch-valprint.c (chill_val_print): Cast 2nd arg of
-	chill_print_type_scalar to LONGEST.
-	chill_print_type_scalar): Make static and add prototype.
-	* hppa-tdep.c (get_field): Ifdef out unused function.
-	(set_field): Ditto.
-	(extract_3): Ditto.
-	(extract_5_store): Ditto.
-	(extract_11): Ditto.
-	(extract_12): Ditto.
-	(deposit_17): Ditto.
-	(extract_14): Convert to static and add prototype.
-	(deposit_14): Ditto.
-	(extract_21): Ditto.
-	(deposit_21): Ditto.
-	(extract_17): Ditto.
-	(extract_5r_store): Ditto.
-	(extract_5R_store): Ditto.
-	(extract_5_load): Ditto.
-	(find_proc_framesize): Ditto.
-	(find_dummy_frame_regs): Ditto.
-	(sign_extend): Ditto.
-	(find_unwind_entry): Add prototype.
-	(find_return_regnum): Ditto.
-	(unwind_command): Ditto.
-	(find_dummy_frame_regs): Add parens around subtraction in operand
-	of bitwise-and.
-	(skip_prologue): Add parens around operands of logical-and inside
-	operand of logical-or.
-	(sign_extend): Add parens around operands of subtraction inside
-	operand of shift.
-	(low_sign_extend): Ditto.
-	* top.c (filename_completer): Convert old style decl of
-	filename_completion_function into prototype.
-	* f-lang.c (patch_common_entries): Ifdef out unused function.
-	* stabsread.c (read_cfront_baseclasses): Remove unused local
-	variable "msg_noterm".
-	(resolve_cfront_continuation): Remove unused local variable "fip".
-	(read_type): Remove unused variable xtypenums.
-	(read_cfront_static_fields): Remove unused variable "i".
-	(read_cfront_static_fields): Remove unused variable "nfields".
-	(read_cfront_member_functions): Add missing comment terminator.
-	(read_cfront_static_fields): Return 1 rather than random value.
-	(read_cfront_baseclasses): Ditto.
-	(read_cfront_baseclasses): Ditto.
-	(read_cfront_baseclasses): Ditto.
-	* somsolib.c (som_solib_create_inferior_hook): Remove unused
-	variable "u".
-	(som_solib_create_inferior_hook): Remove unused variable
-	shadow_contents.
-	(language.h): Add for needed prototypes.
-	(som_solib_sharedlibrary_command): Add prototype.
-	* hpread.c: (hpread_read_array_type): Add prototype.
-	* somread.c (hpread_build_pysmtabs): Add prototype.
-	(hpread_symfile_finish): Ditto.
-	(hpread_symfile_init): Ditto.
-	* hppah-nat.c (fetch_register): Convert old style decl
-	to prototype.
-	(gdbcore.h): Include for needed prototypes.
-	(fetch_register): Remove unused variable "mess".
-	* remote-pa.c (get_offsets): Ifdef out unused function.
-	(remote_start_remote): Remove unused variable "timeout".
-	(boot_board): Add prototype.
-	(reaad_frame): Add prototype.
-	(getpkt): Remove unused variable "bp".
-	(remote_kill): Add prototype.
-	(remote_mourn): Add prototype.
-	(remote_insert_breakpoint): Add prototype.
-	(remote_remove_breakpoint): Add prototype.
-	* valops.c (value_push): Only use if PUSH_ARGUMENTS is not defined.
-	* infcmd.c (do_registers_info): Only need prototype if
-	DO_REGISTERS_INFO is not defined.
-	(breakpoint_auto_delete_contents): Only need if
-	CALL_DUMMY_BREAKPOINT_OFFSET is defined.
-
-Sat Jul 27 08:49:49 1996  Fred Fish  <fnf@cygnus.com>
-
-	* xcoffread.c (xcoff_end_psymtab): Add textlow_not_set parameter.
-	(END_PSYMTAB): Ditto.
-	(scan_xcoff_symtab): Call xcoff_end_psymtab with textlow_not_set.
-
-Fri Jul 26 14:07:37 1996  Ian Lance Taylor  <ian@cygnus.com>
-
-	* printcmd.c (_initialize_printcmd): Initialize
-	tm_print_insn_info.flavour.
-
-Thu Jul 25 19:41:31 1996  Fred Fish  <fnf@cygnus.com>
-
-	* Makefile.in (scm-valprint.o): Depends upon gdbcore_h.
-	(arm-tdep.o): Ditto.
-	(dcache.o): Ditto.
-	(i386ly-tdep.o): Ditto.
-	(i960-tdep.o): Ditto.
-	(m68k-tdep.o): Ditto.
-	(nindy-tdep.o): Ditto.
-	(scm-lang.o): Ditto.
-	(w65-tdep.o): Ditto.
-	(z8k-tdep.o): Ditto.
-	(m68k-tdep.o): Depends upon value_h and gdb_string.h
-	(m2-valprint.o): Depends upon m2-lang.h.
-	(sparc-tdep.o): Depends upon gdb_string.h
-	(valprint.o): Depends upon valprint.h
-	
-	* remote-e7000.c (notice_quit): Remove prototype.
-	* top.c (initialize_targets): Remove prototype, now in target.h.
-	* stabsread.c (resolve_cfront_continuation): Remove prototype.
-	* dbxread.c (resolve_cfront_continuation): Remove prototype.
-	* symfile.h (set_demangling_style): Remove prototype.
-	* config/tm-sysv4.h (in_plt_section): Remove prototype, in objfiles.h.
-	* config/sparc/tm-sparc.h (single_step): Remove extern decl, now in
- 	target.h.
-	* config/arc/tm-arc.h (one_stepped, single_step): Remove extern decls,
- 	now in target.h.
-	* ser-unix.c (hardwire_restore): Remove obsolete prototype.
-	* sparc-tdep.c (single_step): Remove forward decl of isbranch.
-	* scm-lang.c (find_function_in_inferior): Remove prototype.
-	(value_allocate_space_in_inferior): Ditto.
-	* infrun.c (write_pc_pid): Remove prototype, now in inferior.h.
-	* defs.h (strchr): Remove declarations, they are declared in
- 	gdb_string.h also.
-	(strrchr): Ditto.
- 	(strstr): Ditto.
- 	(strtok): Ditto.
- 	(strerror): Ditto.
-	* f-valprint.c (f77_print_array_1): Remove extra arg that was being
-	passed to f77_print_array_1.
-	* gdbtypes.c (add_name): Remove unused variables lenstrlen and lenstr.
-	* scm-exp.c (scm_istr2int): Remove unused variable "j".
-	(scm_parse): Remove unused variable "str".
-	* hp300ux-nat.c (store_inferior_register): Remove unused variable
- 	"buf".
-	(store_inferior_registers): Remove unnecessary decl "registers".
-	* m68k-tdep.c (m68k_pop_frame): Remove unused variable "fi".
-	* scm-lang.c (scm_get_field): Remove unused variable "val".
-	(scm_lookup_name): Remove unused variable "symval".
-	* objfiles.c (map_to_file): Remove unused local variable "tempfd".
-	* procfs.c (do_attach, do_detach): Remove unused variable "result".
-	(last_resume_pid): Remove unused static variable.
-	* alpha-tdep.c (alpha_linux_sigtramp_offset): Remove unused variable
-	"res".
-	* objfiles.c (map_to_address): Remove unused function.
-	* f-valprint.c (print_max): Remove extraneous extern decl,
- 	in valprint.h.
-	(calc_f77_array_dims): Remove extraneous prototype, in f-lang.h.
-	* ch-exp.c (write_lower_upper_value): Remove prototype for
-	type_lower_upper.
-
-	* gdbtypes.c (cfront_mangle_name): #ifdef out unused function.
-	* ch-exp.c (parse_mode_call): Ditto.
-	* f-valprint.c (there_is_a_visible_common_named): Ditto.
-	* f-lang.c (clear_function_list): Ditto.
-	(get_bf_for_fcn): Ditto.
- 	(clear_bf_list): Ditto.
- 	(add_common_block): Ditto.
-	(patch_all_commons_by_name): Ditto.
- 	(find_first_common_named): Ditto.
- 	(add_common_entry): Ditto.
-	(allocate_saved_function_node): Ditto.
- 	(allocate_saved_bf_node): Ditto.
-	(allocate_common_entry_node): Ditto.
-	(allocate_saved_f77_common_node): Ditto.
-	
-	* arm-tdep.c (gdbcore.h): Include for necessary prototypes.
-	* dcache.c (gdbcore.h): Ditto.
-	* i386ly-tdep.c (gdbcore.h): Ditto.
-	* i960-tdep.c (gdbcore.h): Ditto.
-	* m2-valprint.c (m2-lang.h): Ditto.
-	* m68k-tdep.c (gdbcore.h): Ditto.
-	(value.h): Ditto.
-	(gdb_string.h): Ditto.
-	* nindy-tdep.c (gdbcore.h): Ditto.
-	* scm-lang.c (gdbcore.h): Ditto.
-	* scm-valprint.c (gdbcore.h): Ditto.
-	* w65-tdep.c (gdbcore.h): Ditto.
-	* z8k-tdep.c (gdbcore.h): Ditto.
-	* sparc-tdep.c (gdb_string.h): Include.
-	* valprint.c (valprint.h): Include.
-
-	* config/xm-lynx.h: Remove part of comment about INT_MIN
-	redefined warnings from defs.h, since INT_MIN define in
-	defs.h is now protected by #ifndef INT_MIN.
-	* config/i386/xm-i386bsd.h: Ditto.
-	* config/m68k/xm-hp300bsd.h: Ditto.
-	* config/m68k/xm-news.h: Ditto.
-
-	* config/pa/xm-hppah.h (INT_MIN): Remove bogus INT_MIN
-	definition as 0x80000000.  The macro in defs.h is better.
-	* config/i386/xm-i386m3.h (INT_MIN): Ditto.
-	* config/i386/xm-i386mach.h (INT_MIN): Ditto.
-	* config/ns32k/xm-ns32km3.h (INT_MIN): Ditto.
-	* config/pa/xm-hppab.h: Ditto.
-
-	* core-aout.c (fetch_core_registers): Add prototype.
-	* hp300ux-nat.c (fetch_inferior_register): Ditto.
-	(store_inferior_register_1): Ditto.
-	(store_inferior_register): Ditto.
-	* config/m68k/tm-m68k.h (find_saved_regs): Ditto.
-	*scm-valprint.c (c_val_print): Ditto.
-	* procfs.c (add_fd): Ditto.
-	(remove_fd): Ditto.
-	(wait_fd): Ditto.
-	(sigcodename): Ditto.
-	(sigcodedesc): Ditto.
-	(procfs_kill_inferior): Ditto.
-	(procfs_xfer_memory): Ditto.
- 	(procfs_store_registers): Ditto.
-	(create_procinfo): Ditto.
- 	(procfs_init_inferior): Ditto.
- 	(proc_set_exec_trap): Ditto.
-	(procfs_attach): Ditto.
- 	(procfs_detach): Ditto.
- 	(procfs_prepare_to_store): Ditto.
-	(procfs_files_info): Ditto.
- 	(procfs_open): Ditto.
- 	(procfs_wait): Ditto.
- 	(procfs_fetch_registers): Ditto.
-	(procfs_mourn_inferior): Ditto.
- 	(procfs_can_run): Ditto.
- 	(procfs_thread_alive): Ditto.
-	(procfs_stop): Ditto.
-	* alpha-nat.c (fetch_core_registers): Ditto.
-	* config/alpha/tm-alpha.h (alpha_osf_skip_sigtramp_frame): Ditto.
-	* objfiles.c (ecoff_relocate_efi): Ditto.
-	* inflow.c (pass_signal): Ditto.
-	(handle_sigio): Ditto.
-	* annotate.c (breakpoint_changed): Ditto.
-	* callback.c (wrap): Ditto.
-	(fdbad): Ditto.
- 	(fdmap): Ditto.
-	* utils.c (malloc_botch): Ditto.
-	(fputs_maybe_filtered): Ditto.
-	(vfprintf_maybe_filtered): Ditto.
-	* defs.h (notice_quit): Ditto.
-	* defs.h (xmalloc, xrealloc): Ditto.
-	* top.c (stop_sig): Ditto.
-	(init_signals): Ditto.
- 	(user_defined_command): Ditto.
- 	(source_cleanup_lines): Ditto.
-	(dont_repeat_command): Ditto.
-	(serial_log_command): Ditto.
-	(disconnect): Ditto.
-	* target.h (initialize_targets): Ditto.
-	* os9kread.c (read_minimal_symbols): Ditto.
-	* mdebugread.c (mdebug_psymtab_to_symtab): Ditto.
-	(fdr_name): Ditto.
- 	(push_parse_stack): Ditto.
-	(pop_parse_stack): Ditto.
- 	(is_pending_symbol): Ditto.
- 	(add_pending): Ditto.
-	* serial.c (serial_logchar): Ditto.
-	(serial_interface_lookup): Ditto.
-	* serial.h (serial_log_command): Ditto.
-	* f-valprint.c (info_common_command): Ditto.
-	* gdbtypes.h (print_type_scalar): Ditto.
-	* scm-valprint.c (scm_scmlist_print): Ditto.
-	(scm_ipruk): Ditto.
-	* scm-lang.c (scm_printstr): Ditto.
-	(in_eval_c): Ditto.
- 	(evaluate_subexp_scm): Ditto.
-	* scm-exp.c (scm_read_token): Ditto.
-	(scm_skip_ws): Ditto.
- 	(scm_lreadparen): Ditto.
-	* m2-lang.c (emit_char): Ditto.
-	(m2_printchar): Ditto.
- 	(m2_printstr): Ditto.
-	(m2_create_fundamental_type): Ditto.
-	* f-lang.c (emit_char): Ditto.
-	(f_printchar): Ditto.
- 	(f_printstr): Ditto.
-	(f_create_fundamental_type): Ditto.
-	* ch-lang.c (chill_printchar): Ditto.
-	(chill_printstr): Ditto.
-	(chill_create_fundamental_type): Ditto.
- 	(value_chill_length): Ditto.
- 	(value_chill_card): Ditto.
-	(value_chill_max_min): Ditto.
- 	(evaluate_subexp_chill): Ditto.
-	* ch-exp.c (PEEK_TOKEN): Ditto.
-	(peek_token_): Ditto.
- 	(forward_token_): Ditto.
- 	(parse_case_label): Ditto.
-	(parse_opt_untyped_expr): Ditto.
- 	(parse_unary_call): Ditto.
- 	(parse_call): Ditto.
-	(parse_named_record_element): Ditto.
- 	(parse_tuple_element): Ditto.
-	(parse_opt_element_list): Ditto.
- 	(parse_tuple): Ditto.
- 	(parse_primval): Ditto.
- 	(parse_operand6): Ditto.
-	(parse_operand5): Ditto.
- 	(parse_operand4): Ditto.
- 	(parse_operand3): Ditto.
- 	(parse_operand2): Ditto.
-	(parse_operand1): Ditto.
- 	(parse_operand0): Ditto.
- 	(parse_expr): Ditto.
- 	(parse_then_alternative): Ditto.
-	(parse_else_alternative): Ditto.
- 	(parse_if_expression): Ditto.
- 	(parse_untyped_expr): Ditto.
-	(growbuf_by_size): Ditto.
- 	(match_simple_name_string): Ditto.
- 	(decode_integer_value): Ditto.
-	(decode_integer_literal): Ditto.
- 	(match_float_literal): Ditto.
- 	(match_float_literal): Ditto.
-	(match_string_literal): Ditto.
- 	(match_character_literal): Ditto.
- 	(match_integer_literal): Ditto.
-	(match_bitstring_literal): Ditto.
- 	(write_lower_upper_value): Ditto.
-	* ch-lang.h (type_lower_upper): Ditto.
-	* c-lang.c (emit_char): Ditto.
-	* dwarfread.c (free_utypes): Ditto.
-	* stabsread.h (resolve_cfront_continuation): Ditto.
-	* stabsread.c (get_substring): Ditto.
-	(read_one_struct_field): Ditto.
-	* stabsread.h (process_later): Ditto.
-	* demangle.c (set_demangling_command): Ditto.
-	* defs.h (set_demangling_style): Ditto.
-	* maint.c (maintenance_info_command): Ditto.
-	(print_section_table): Ditto.
-	(maintenance_info_sections): Ditto.
- 	(maintenance_print_command): Ditto.
-	* symtab.h (maintenance_print_statistics): Ditto.
-	* objfiles.h (in_plt_section): Ditto.
-	* objfiles.c (add_to_objfile_sections): Ditto.
-	* bcache.c (hash): Ditto.
-	(lookup_cache): Ditto.
-	* exec.c (bfdsec_to_vmap): Ditto.
-	(ignore): Ditto.
-	* f-exp.y (growbuf_by_size, match_string_literal): Ditto.
-	* language.c (unk_lang_printchar): Ditto.
-	(unk_lang_printstr): Ditto.
-	(unk_lang_create_fundamental_type): Ditto.
- 	(unk_lang_print_type): Ditto.
-	(unk_lang_val_print): Ditto.
- 	(unk_lang_value_print): Ditto.
-	* target.c (update_current_target): Ditto.
-	(debug_to_open): Ditto.
- 	(debug_to_close): Ditto.
-	(debug_to_attach): Ditto.
- 	(debug_to_detach): Ditto.
- 	(debug_to_resume): Ditto.
- 	(debug_to_wait): Ditto.
-	(debug_to_fetch_registers): Ditto.
- 	(debug_to_store_registers): Ditto.
- 	(debug_to_prepare_to_store): Ditto.
- 	(debug_to_xfer_memory): Ditto.
- 	(debug_to_files_info): Ditto.
- 	(debug_to_insert_breakpoint): Ditto.
-	(debug_to_remove_breakpoint): Ditto.
- 	(debug_to_terminal_init): Ditto.
-	(debug_to_terminal_inferior): Ditto.
- 	(debug_to_terminal_ours_for_output): Ditto.
-	(debug_to_terminal_ours): Ditto.
- 	(debug_to_terminal_info): Ditto.
- 	(debug_to_kill): Ditto.
-	(debug_to_load): Ditto.
- 	(debug_to_lookup_symbol): Ditto.
- 	(debug_to_create_inferior): Ditto.
-	(debug_to_mourn_inferior): Ditto.
- 	(debug_to_can_run): Ditto.
- 	(debug_to_notice_signals): Ditto.
-	(debug_to_thread_alive): Ditto.
- 	(debug_to_stop): Ditto.
-	* breakpoint.h (set_breakpoint_sal): Ditto.
-	* remote-utils.c (usage): Ditto.
-	* remote.c (set_thread): Ditto.
-	(remote_thread_alive): Ditto.
-	(get_offsets): Ditto.
-	(read_frame): Ditto.
-	(remote_insert_breakpoint): Ditto.
-	(remote_remove_breakpoint): Ditto.
-	* sparc-nat.c (fetch_core_registers): Ditto.
-	* corelow.c (add_to_thread_list): Ditto.
-	(ignore): Ditto.
-	* inftarg.c (proc_wait): Ditto.
-	* infptrace.c (udot_info): Ditto.
-	(fetch_register): Ditto.
-	* ser-unix.c (hardwire_noflush_set_tty_state): Ditto.
-	(hardwire_print_tty_state): Ditto.
-	(hardwire_flush_output): Ditto.
-	(hardwire_flush_input): Ditto.
-	(hardwire_send_break): Ditto.
-	(hardwire_setstopbits): Ditto.
-	* ser-tcp.c (tcp_return_0): Ditto.
-	(tcp_noflush_set_tty_state): Ditto.
-	(tcp_print_tty_state): Ditto.
-	* solib.c (match_main): Ditto.
-	* gdbtypes.c (print_bit_vector): Ditto.
-	(print_arg_types): Ditto.
-	(dump_fn_fieldlists): Ditto.
-	(print_cplus_stuff): Ditto.
-	* symfile.h (entry_point_address): Ditto.
-	* symfile.c (decrement_reading_symtab): Ditto.
-	* valops.c (value_arg_coerce): Ditto.
-	* value.h (find_function_in_inferior): Ditto.
-	(value_allocate_space_in_inferior): Ditto.
-	* values.c (vb_match): Ditto.
-	* thread.c (info_thread_command): Ditto.
-	(restore_current_thread): Ditto.
-	(thread_apply_all_command): Ditto.
-	(thread_apply_command): Ditto.
-	* inferior.h (write_pc_pid): Ditto.
-	* infrun.c (delete_breakpoint_current_contents): Ditto.
-	* breakpoint.c (print_it_normal): Ditto.
-	(watchpoint_check): Ditto.
-	(print_it_done): Ditto.
-	(print_it_noop): Ditto.
-	(maintenance_info_breakpoints): Ditto.
-	(create_longjmp_breakpoint): Ditto.
-	(hbreak_command): Ditto.
-	(thbreak_command): Ditto.
-	(watch_commnd_1): Ditto.
-	(rwatch_command): Ditto.
-	(awatch_command): Ditto.
-	(do_enable_breakpoint): Ditto.
-	* ch-valprint.c (chill_val_print_array_elements): Ditto.
-	* eval.c (evaluate_subexp): Ditto.
-	(get_label): Ditto.
-	(evaluate_struct_tuple): Ditto.
-	* eval.c (init_array_element): Ditto.
-
-	* alpha-tdep.c (push_sigtramp_desc): Add prototype and make static.
-	* breakpoint.c (hw_breakpoint_used_count): Ditto.
-	(hw_watchpoint_used_count): Ditto.
-	* findvar.c (write_register_gen): Ditto.
-	(read_register_pid): Ditto.
-	* symtab.c (cplusplus_hint): Ditto.
-	* infcmd.c (breakpoint_auto_delete_contents): Ditto.
-	* ch-valprint.c (chill_print_type_scalar): Ditto.
-	* gdbtypes.c (add_name): Ditto.
-	(add_mangled_type): Ditto.
-	(cfront_mangle_name): Ditto.
-	* sparc-tdep.c (isbranch): Ditto.
-	* inftarg.c (child_stop): Ditto.
-	* win32-nat.c (child_stop): Ditto.
-	* mac-nat.c (child_stop): Ditto.
-	* remote-utils.c (sr_com): Ditto.
-	* dbxread.c (process_now): Ditto.
-	* ch-exp.c (require): Ditto.
-	(check_token): Ditto.
-	(expect): Ditto.
-	(parse_mode_call): Ditto.
-	(parse_mode_or_normal_call): Ditto.
-	* scm-lang.c (scm_lookup_name): Ditto
-	* f-lang.c (allocate_saved_bf_node): Ditto.
-	(allocate_saved_function_node): Ditto.
-	(allocate_saved_f77_common_node): Ditto.
- 	(allocate_common_entry_node): Ditto.
-	(add_common_block): Ditto.
- 	(add_common_entry): Ditto.
- 	(find_first_common_named): Ditto.
-	(patch_common_entries): Ditto.
- 	(patch_all_commons_by_name): Ditto.
- 	(clear_bf_list): Ditto.
-	(get_bf_for_fcn): Ditto.
- 	(clear_function_list):  Ditto.
-	* scm-exp.c (scm_istr2int): Ditto.
-	(scm_istring2number): Ditto.
-	* scm-valprint.c (scm_inferior_print): Ditto.
-	* f-typeprint.c (print_equivalent_f77_float_type): Ditto.
-	* f-valprint.c (f77_get_dynamic_length_of_aggregate): Ditto.
-	(f77_create_arrayprint_offset_tbl): Ditto.
- 	(f77_print_array_1): Ditto.
- 	(f77_print_array): Ditto.
-	(list_all_visible_commons): Ditto.
- 	(there_is_a_visible_common_named): Ditto.
-	* mdebugread.c (ecoff_relocate_efi): Ditto.
-	* callback.c (os_close): Ditto.
-	(os_get_errno): Ditto.
- 	(os_isatty): Ditto.
- 	(os_lseek): Ditto.
- 	(os_open): Ditto.
-	(os_read): Ditto.
- 	(os_read_stdin): Ditto.
- 	(os_write): Ditto.
- 	(os_write_stdout): Ditto.
- 	(os_rename): Ditto.
-	(os_system): Ditto.
- 	(os_time): Ditto.
- 	(os_unlink): Ditto.
- 	(os_shutdown): Ditto.
- 	(os_init): Ditto.
-	(os_printf_filtered): Ditto.
-
-	* scm-lang.h (scm_parse): Change old style decl to prototype.
-	* config/alpha/tm-alphalinux.h (alpha_linux_sigtramp_offset): Ditto.
-	* top.c (init_proc): Ditto.
-	(query_hook): Ditto.
-	(error_hook): Ditto.
-	* f-lang.c (c_value_print): Ditto.
-	* ch-exp.c (parse_expression): Ditto.
-	(parse_primval): Ditto.
- 	(parse_untyped_expr): Ditto.
-	(parse_opt_untyped_expr): Ditto.
- 	(ch_lex): Ditto.
-	* config/sparc/tm-sparc.h (sparc_init_extra_frame_info): Ditto.
-	(sparc_frame_saved_pc): Ditto.
-	(sparc_push_dummy_frame): Ditto.
-	(sparc_pop_frame): Ditto.
-	* defs.h (fclose): Ditto.
-	(atof): Ditto.
- 	(error_hook): Ditto.
-
-	* arc-tdep.c (single_step): Change arg to type "enum target_signal".
-	* rs6000-tdep.c (single_step): Ditto.
-	* sparc-tdep.c (single_step): Ditto.
-
-	* breakpoint.c (cleanup_executing_breakpoints): Change unused arg type
-	to PTR which is what make_cleanup expects.
-	* utils.c (null_cleanup): Change arg type to PTR.
-	* defs.h (null_cleanup): Change prototype to match actual function.
-	* config/sparc/tm-sparc.h (struct frame_info): Move forward decl.
-	* ch-valprint.c (chill_val_print): Cast 2nd arg of
-	chill_print_type_scalar to LONGEST.
-	* infrun.c (wait_for_inferior): Have empty switch case for
-	BPSTAT_WHAT_CHECK_SHLIBS when SOLIB_ADD is not defined.
-	(stop_on_solib_events): Only needed if SOLIB_ADD is defined.
-	* infcmd.c (attach_command): Only need auto_solib_add if SOLIB_ADD
-	is defined.
-	* symfile.c (generic_load): Scan long int using a long int spec,
-	not an int spec.
-	* infptrace.c (udot_info): Only need local variables if	KERNEL_U_SIZE
- 	is defined.
-	(fetch_register): Only need function if FETCH_INFERIOR_REGISTERS is
- 	not defined.
-	* inflow.c (handle_sigio): Only need prototype when the actual
-	function is compiled in.
-	* valprint.c (longest_to_int): Expand error message to be
-	separate messages for args larger than largest signed int
-	and args smaller than smallest signed int.
-	* valprint.c (print_longest): Fix problems with support for case
-	where compiler supports type "long long" but the runtime doesn't
-	support printing them with "%ll".
-	* scm-valprint.c (scm_scmlist_print, scm_scmval_print): Change
- 	return types to void since we don't actually return anything
- 	meaningful and callees ignore the values anyway.
-	* procfs.c (modify_inherit_on_fork_flag): Enclose pr_flags in PIOCSET
-	ifdef.
-	(modify_run_on_last_close_flag): Ditto.
-	(wait_fd): Enclose local variables "num_fds" and "i" LOSING_POLL
-	ifdef
-	* alpha-tdep.c (push_sigtramp_desc): Return proc_desc rather than
- 	random value.
-	* infrun.c (wait_for_inferior): Ensure random_signal is not used
-	uninitialized.
-	* valops.c (call_function_by_hand): Ensure struct_addr is not used
-	uninitialized.
-	* breakpoint.c (watch_command_1): Ensure prev_frame is not used
-	uninitialized.
-	* utils.c (vfprintf_maybe_filtered): Change second arg from "char *"
-	to "const char *".
-	* infptrace.c (udot_info): Add two dummy args so that the type is
-	correct for passing to add_info.
-	* f-lang.c (saved_fcn): Move decl to head of file so it can be used
- 	in prototypes.
- 	(saved_bf_symnum): Ditto.
- 	(SAVED_FUNCTION): Ditto.
-	(SAVED_FUNCTION_PTR): Ditto.
- 	(SAVED_BF): Ditto.
- 	(SAVED_BF_PTR): Ditto.
-	* ch-exp.c (parse_named_record_element): Build error message in
-	temporary buffer before passing it to expect, rather than passing
-	wrong number of args to expect.
-	* demangle.c (set_demangling_style): Call set_demangling_command with
-	correct number of arguments.
-	* inferior.h (terminal_init_inferior_with_pgrp): Change arg type to
-	int to match actual function.
-	(os_isatty): Call fdmap with right number of arguments, was missing
-	the host_callback* arg.
-	* target.c (cleanup_target): Prototype all functions casts.
-	* target.h (one_stepped, single_step): Declare here and convert
-	single_step to prototype.
-	* infrun.c (one_stepped, single_step): Don't declare externs
-	here, they have moved to target.h.
- 	* eval.c (init_array_element): Declare previously undeclared
-	last two args as LONGEST.
-	* dcache.c (dcache_xfer_memory):  Change xfunc decls to prototype form.
-
-Thu Jul 25 16:11:54 1996  Doug Evans  <dje@canuck.cygnus.com>
-
-	* dsrec.c (load_srec): Protect ANSI style function parms with PARAMS.
-
-Mon Jul 22 18:13:27 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* Makefile.in (os9kread.o):  Remove dependency on partial-stab.h.
-	* dbxread.c (read_dbx_symtab end_psymtab), partial-stab.h:  Don't
-	use partial_symtab->textlow==0 as a flag, as 0 is a legitimate
-	text address.  Use a seperate flag (textlow_not_set) instead.
-	This makes stabs in ELF .o files work a lot better.
-	* mdebugread.c xcoffread.c:  Define textlow_not_set for
-	partial-stab.h.
-	* stabsread.h (end_psymtab):  Add textlow_not_set arg to prototype.
-
-Sat Jul 20 10:41:06 1996  Fred Fish  <fnf@cygnus.com>
-
-	* dwarf2read.c (struct filenames): Change internal "struct file"
-	to "struct fileinfo" to avoid conflict with "struct file" in
-	<sys/file.h> on HPUX and Solaris.
-
-Fri Jul 19 14:05:57 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* dwarf2read.c: New file, DWARF 2 reader originally contributed by
-	Brent Benson, with additions by Gary Funck and Jerry Kreuscher.
-	* Makefile.in (COMMON_OBS): Add dwarf2read.o.
-	(SFILES): Add dwarf2read.c.
-	(dwarf2read.o): Add build rule.
-	* symfile.h (dwarf2_has_info, dwarf2_build_psymtabs): Declare
-	exported functions.
-	* elfread.c (elf_symfile_read): Call them.
-	(elf_symtab_read) [HARRIS_TARGET]: Skip some special symbols.
-
-Thu Jul 18 01:22:01 1996  Geoffrey Noer  <noer@cygnus.com>
-
-	* symfile.c (symfile_bfd_open): 
-	* exec.c (exec_file_command): for __GO32__ and __WIN32__ systems,
-	free the user from having to type the .exe extension.
-
-Wed Jul 17 06:54:50 1996  Mark Alexander  <marka@cygnus.com>
-
-	* mon960-rom.c: Shorten the mon960_inits string to a single
-	carriage return; this prevents a hang on connecting immediately
-	after powerup, when MON960 is attempting autobaud detection.
-
-Tue Jul 16 23:47:04 1996  Mark Alexander  <marka@cygnus.com>
-
-	* a29k-tdep.c (get_saved_register): Allow PC to be modified
-	when innermost frame is selected, but not in outer frames.
-
-Tue Jul 16 23:37:25 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* command.c (do_setshow_command):  Don't segfault when showing
-	var_string and var_string_noescape vars that are NULL.
-
-Mon Jul 15 16:55:48 1996  Doug Evans  <dje@canuck.cygnus.com>
-
-	* win32-nat.c (handle_load_dll): dos_path_to_unix_path renamed to
-	cygwin32_conv_to_posix_path.
-	(child_create_inferior): unix_path_to_dos_path renamed to
-	cygwin32_conv_to_win32_path.  Rewrite code to translate PATH.
-
-Mon Jul 15 16:44:05 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* defs.h printcmd.c:  Create global disassemble_info structure
-	tm_print_insn_info.
-	* i386-tdep.c (set_assembly_language_command):  set
-	tm_print_insn_info.mach to the appropriate value for 386 or 8086
-	disassembly.
-	* printcmd.c (print_insn):  Move init of disassembler_info to
-	_initialize_printcmd.  Set endian for disassembler here.
-	* sparc-tdep.c:  Set tm_print_insn_info.mach as appropriate to
-	select sparc/sparclite.
-	* config/sparc/{tm-sparc.h tm-sparclite.h}:  Get rid of
-	TM_PRINT_INSN.  Set TM_PRINT_INSN_MACH to
-	bfd_mach_sparc/bfd_mach_sparc_sparclite.
-
-Fri Jul 12 19:04:32 1996  Fred Fish  <fnf@cygnus.com>
-
-	* hpread.c (hpread_lookup_type): Use xmmalloc/xmrealloc rather
-	than xmalloc/xrealloc.
-
-Fri Jul 12 17:59:47 1996  Fred Fish  <fnf@cygnus.com>
-
-	* objfiles.c (map_to_file): Error return from mmalloc_findbase is
-	a NULL pointer, not a -1.
-
-Fri Jul 12 10:16:24 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* i386-tdep.c (set_assembly_language_command):  New routine to
-	select between i386 and i8086 instruction sets for disassembly.
-	New command `set assembly-language {i386 i8086}'.
-
-Thu Jul 11 21:13:21 1996  Mark Alexander  <marka@cygnus.com>
-
-	* monitor.c (monitor_write_memory, monitor_read_memory_single):
-	Disable use of "long long" memory read/write commands; can't
-	use them because we hold the values to read/write in an int
-	variable, and because strtoul fails on values that exceed the
-	size of a long.  This fixes breakpoint problems on MON960.
-
-Thu Jul 11 11:39:31 1996  Fred Fish  <fnf@cygnus.com>
-
-	* config/m68k/xm-hp300hpux.h (HAVE_MMAP): Remove definition.
-	* config/pa/xm-hppah.h (HAVE_MMAP): Ditto.
-
-Wed Jul 10 16:54:41 1996  Fred Fish  <fnf@cygnus.com>
-
-	* Makefile.in (MMALLOC_CFLAGS): Eliminate intermediate MMALLOC_DISABLE
-	and MMALLOC_CHECK macros, and add comment indicating how host dependent
-	makefile fragment should modify MMALLOC_CFLAGS to not use mmalloc, or
-	to use it but to not do heap corruption checking.
-	* gdbserver/Makefile.in: Ditto.
-	* utils.c (init_malloc): Replace warning() use with direct call of
-	fprintf_unfiltered, since current_target has not yet been set and thus
- 	we cannot use warning().  If we try to use mmcheck and it fails,
-	suggest that this configuration needs NO_MMCHECK or MMCHECK_FORCE
- 	defined.  Other small mmalloc related cleanups.
-	* config/sparc/sun4os4.mh (MMALLOC_CFLAGS): Define MMCHECK_FORCE to 1.
-	* config/alpha/alpha-osf2.mh (MMALLOC_CFLAGS): Set to -DNO_MMCHECK.
-
-	* config/sparc/xm-sun4os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
-	* config/i386/xm-i386v4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): 
-	* config/i386/xm-linux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
-	* config/m68k/xm-hp300hpux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
-	* config/m68k/xm-m68kv4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT);
-	* config/m68k/xm-sun3os4.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
-	* config/pa/xm-hppah.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
-	* config/sparc/xm-sun4sol2.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT):
-	Remove obsolete defines.
-
-	* config/alpha/alpha-linux.mh (MMALLOC_DISABLE):
-	* config/alpha/alpha-osf1.mh (MMALLOC_DISABLE):
-	* config/rs6000/rs6000.mh (MMALLOC_DISABLE):
-	* config/rs6000/aix4.mh (MMALLOC_DISABLE):
-	* config/powerpc/aix4.mh (MMALLOC_DISABLE):
-	* config/powerpc/aix.mh (MMALLOC_DISABLE):
-	* config/ns32k/ns32km3.mh (MMALLOC_DISABLE):
-	* config/mips/mipsm3.mh (MMALLOC_DISABLE):
-	* config/mips/decstation.mh (MMALLOC_DISABLE):
-	* config/m88k/cxux.mh (MMALLOC_DISABLE):
-	* config/i386/i386mk.mh (MMALLOC_DISABLE):
-	* config/i386/i386m3.mh (MMALLOC_DISABLE):
-	* config/i386/i386gnu.mh (MMALLOC_DISABLE):
-	Use MMALLOC_CFLAGS instead.
-
-Tue Jul  9 22:41:12 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* h8300-tdep.c: Remove some outdated comments.
-	(h8300_skip_prologue): Rework to be more correct for the H8/300H.
-	Handle stm.l insns for the H8/S.
-	(examine_prologue): Likewise.
-
-Tue Jul  9 16:48:55 1996  Raymond Jou  <rjou@mexican.cygnus.com>
-
-	* ser-mac.c (mac_close): Change a typo SetSetBuf to SerSetBuf.
-
-Mon Jul 08 08:50:39 1996  Mark Alexander  <marka@cygnus.com>
-
-	* mon960-rom.c (mon960_open): Add floating point detection to
-	prevent hang on non-FPU processors (PR 9775).
-	(mon960_cmds): Swap setmem.cmdw and setmem.cmdl to fix problem
-	setting breakpoints and improve loading speed.
-
-Sun Jul  7 14:57:34 1996  Fred Fish  <fnf@cygnus.com>
-
-	* coffread.c (record_minimal_symbol): Don't presave name string
-	on symbol_obstack before passing to prim_record_minimal_symbol.
-	It now handles saving the string itself.
-	* dbxread.c (read_dbx_dynamic_symtab): Ditto.
-	* mipsread.c (read_alphacoff_dynamic_symtab): Ditto.
-	* os9kread.c (record_minimal_symbol): Ditto.
-	* solib.c (solib_add_common_symbols): Ditto.
-
-	* coffread.c (coff_symtab_read): Don't presave name string on
-	symbol_obstack before passing to prim_record_minimal_symbol_and_info.
-	It now handles saving the string itself.
-	* dbxread.c (record_minimal_symbol): Ditto.
-	* elfread.c (record_minimal_symbol_and_info): Ditto.
-	
-	* dstread.c (record_minimal_symbol): Remove static function that just
-	called prim_record_minimal_symbol with the same args (after change to
- 	prim_record_minimal_symbol to do it's own name string saves).
-	* nlmread.c (record_minimal_symbol): Ditto.
-	* somread.c (record_minimal_symbol): Ditto.
-
-	* hpread.c (hpread_read_enum_type): Save symbol name on symbol obstack.
-	(hpread_read_function_type): Ditto.
-	(hpread_process_one_debug_symbol): Ditto.
-	* mdebugread.c (parse_symbol): Ditto.
-	(new_symbol): Ditto.
-	* minsyms.c (prim_record_minimal_symbol_and_info): Ditto.
-
-	* coffread.c (process_coff_symbol): Use obsavestring to save
-	SYMBOL_NAME, rather than obstack_copy0.
-	* dstread.c (create_new_symbol): Ditto
-	* symfile.c (obconcat): Ditto.
-	* stabsread.c (patch_block_stabs): Ditto.
-	* xcoffread.c (SYMNAME_ALLOC): Ditto.
-
-	* symfile.c (obsavestring): Update comments
-	* solib.c (solib_add_common_symbols): Remove local var origname.
-
-Wed Jul  3 15:56:08 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* configure:  Re-build with autoconf-2.10.
-
-	* sparcl-tdep.c (_initialize_sparc_tdep) config/sparc/tm-sparc.h,
-	config/sparc/tm-sparclite.h:  Initialize tm_print_insn from
-	TM_PRINT_INSN, which comes from the tm file.
-
-Tue Jul 02 21:41:20 1996  Mark Alexander  <marka@cygnus.com>
-
-	* coffread.c, dbxread.c, elfread.c, mipsread.c, nlmread.c, 
-	os9kread.c: Replace identical sym_offsets functions with
-	default_symfile_offsets.
-	* somread.c (som_symfile_offsets): Use new SIZEOF_SECTION_OFFSETS
-	macro to allocate section_offsets.
-	* symfile.c (default_symfile_offsets): New function.
-	* symfile.h: Declare default_symfile_offsets.
-	* symtab.h: Define SIZEOF_SECTION_OFFSETS macro to
-	simplify allocation of section_offsets.
-
-Tue Jun 11 12:02:55 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* Makefile.in (INTERNAL_LDFLAGS):  Add in flags from configure.
-	* configure configure.in:  Only make sol-thread.o for native.
-	Also, switch to dlopened libthread_db.so.1.
-	* sol-thread.c:  Switch to using dlopen to get the thread_db
-	library.
-
-Thu Jun 13 16:53:25 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* configure, configure.in:  Change test for libthread_db to only
-	work for configs where build/host/target are the same.
-
-Tue Jul  2 15:04:20 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* config/powerpc/{linux.mh,xm-linux.h}: New files, for Linux on
-	PowerPC.
-
-	* configure.in (powerpc-*-linux): Add Linux, System V, and ELF
-	support.
-	* configure: Regenerate.
-
-Mon Jul  1 13:00:43 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	From Raymond Jou  <rjou@mexican.cygnus.com>:
-        * mpw-make.sed: Add lines to whack out autoconf hook
-        @CONFIG_LDFLAGS@.
-
-Mon Jul 01 11:07:15 1996  Mark Alexander  <marka@cygnus.com>
-
-	* remote-e7000.c (e7000_stop): New function.
-
-Fri Jun 28 06:34:19 1996  Dawn Perchik  <dawn@cygnus.com>
-
-	* configure, configure.in: Add target sparclet.
-	* monitor.h, monitor.c: Added monitor flags MO_NO_ECHO_ON_SETMEM
- 	(don't expect echo on setmem command), MO_RUN_FIRST_TIME (if
- 	command to start process running on target is different from one
- 	to continue execution), MO_HEX_PREFIX (if addresses from monitor
- 	have a "0x" prefix).
-	* monitor.c, parse.c, sparc-tdep.c: Don't require strings in the
- 	registers array.  This is to allow NULLs to be place holders in
- 	the tm-*.h file so that only minor changes are needed when a new
- 	processor is introduced (eg, one without floating point).
-	* sparc-tdep.c: Conditionally remove dependancies on floating
- 	point.
-  	* sparclet-rom.c, config/sparc/sparclet.mt,
- 	config/sparc/tm-sparclet.h: New files for target sparclet.
-	* symfile.c (load_command): Add option for 2nd parameter; a load
- 	offset added to the vma of each section.
-
-Fri Jun 28 05:39:19 1996  Dawn Perchik  <dawn@cygnus.com>
-
-        * main.c (main): Add option "l" for setting remote_timeout.
-
-Fri Jun 28 05:25:18 1996  Dawn Perchik  <dawn@cygnus.com>
-
-        * remote-e7000.c, remote.c, target.h, top.c: Add set option
- 	"remote_timeout" for setting remote_timeout.  Add set option
- 	"use_hard_breakpoints" for setting hardware .vs. memory
- 	breakpoints.
-
-Fri Jun 28 04:32:18 1996  Dawn Perchik  <dawn@cygnus.com>
-
-        * remote-e7000.c (e7000_parse_device): New function.
-	Add option "tcp_remote" to target command if using 
-	tcp to connect to a remote host which is then connected 
-	via serial port to the e7000 (for exampole, a port master).
-	(e7000_open): Change to call e7000_parse_device.
-
-Fri Jun 28 03:47:17 1996  Dawn Perchik  <dawn@cygnus.com>
-
-	* monitor.c (monitor_debug): Fix remotedebug buffering.
-
-Thu Jun 27 18:24:17 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* config/i386/cygwin32.mh, config/powerpc/cygwin32.mh
-	(NATDEPFILES): Add a space.
-
-Wed Jun 26 06:05:39 1996  Wilfried Moser  <moser@rtl.cygnus.com>
-
-	* gdbtypes.c (create_array_type): If TYPE_LENGTH (result_type)
-	is zero, set TYPE_FLAG_TARGET_STUB to force reevaluation of the type.
-
-	* ch-exp.c (calculate_array_length): Function removed.
-
-Tue Jun 25 17:41:06 1996  Martin M. Hunt  <hunt@pizza.cygnus.com>
-
-	* remote-e7000.c (e7000_read_inferior_memory_large): New function.
-	(e7000_xfer_inferior_memory): Call it.
-
-Tue Jun 25 23:14:07 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
-
-	* gdb/gdbserver/Makefile.in (docdir): Removed.
-
-Tue Jun 25 22:05:38 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
-
-	* Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir):
-	Use autoconf set values.
-	(docdir): Removed.
-	* configure.in (AC_PREREQ): autoconf 2.5 or higher.
-	* nlm/Makefile.in (bindir, libdir, datadir, mandir, infodir, 
-	includedir): Use autoconf set values.
-	(docdir): Removed.
-	* nlm/configure.in (AC_PREREQ): autoconf 2.5 or higher.
-	* nlm/configure: Rebuilt.
-        * gdb/gdbserver/Makefile.in (datadir): Set to $(prefix)/share.
-
-Mon Jun 24 09:56:14 1996  Angela Marie Thomas (angela@cygnus.com)
-
-	* stabsread.c (read_cfront_member_functions): add type
-
-Sun Jun 23 23:40:48 1996  Doug Evans  <dje@canuck.cygnus.com>
-
-	* win32-nat.c: #include <unistd.h>.
-	(unix_paths_to_dos_paths, dos_paths_to_unix_paths): Delete.
-	(child_create_inferior): Convert only env var PATH to win32 style.
-	(set_pathstyle_dos): Delete.
-	(_initialize_inftarg): Delete dos-path-style command.
-
-Thu Jun 20 13:42:23 1996  Doug Evans  <dje@canuck.cygnus.com>
-
-	* configure.in: Revise sol-thread.o test.
-	* configure: Regenerated.
-
-	* source.c (find_source_lines): Reassign size to result of read.
-
-Tue Jun 18 16:25:54 1996  Jeffrey A. Law  <law@rtl.cygnus.com>
-
-	* h8300-dep.c (gdb_print_insn_h8300): Handle the H8/S.
-	(h8300_command): Likewise.
-	(set_machine): Likewise.
-	(set_machine_hook): Likewise.
-	(_initialize_h8300m): Likewise.
-
-	* config/h8300/tm-h8300.h (h8300smode): Declare.
-
-Sun Jun 16 15:21:51 1996  Jeffrey A. Law  <law@rtl.cygnus.com>
-
-	* somsolib.c (som_solib_create_inferior_hook): Handle tracking
-	of shl_load calls for hpux10.
-
-Thu Jun 13 11:16:10 1996  Tom Tromey  <tromey@thepub.cygnus.com>
-
-	* config.in: Regenerated.
-	* acconfig.h (HAVE_THREAD_DB_LIB): Added entry.
-
-	* configure: Regenerated.
-	* aclocal.m4 (CY_AC_PATH_TCLH, CY_AC_PATH_TKH): Use odd names to
-	avoid name clashes with SunOS headers.
-
-Tue Jun 11 19:52:50 1996  Fred Fish  <fnf@cygnus.com>
-
-	From Michael Snyder <Michael_Snyder@next.com>:
-	* bcache.c (print_bcache_statistics): Avoid divide-by-zero
-	exception if one or more objfile has no symbols, such as when
-	a dynamic library has been stripped.
-
-Tue Jun 11 12:02:55 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* Makefile.in (INTERNAL_LDFLAGS):  Add in flags from configure.
-	* configure configure.in:  Only make sol-thread.o for native.
-	Also, switch to dlopened libthread_db.so.1.
-	* sol-thread.c:  Switch to using dlopen to get the thread_db
-	library.
-
-Mon Jun 10 14:17:19 1996  Fred Fish  <fnf@cygnus.com>
-
-	* config/sparc/{xm-sun4sol2.h,xm-sun4os4.h} (MMAP_BASE_ADDRESS):
- 	Change from 0xE0000000 to 0xC0000000.
-
-Thu Jun  6 17:10:32 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* config/powerpc/xm-solaris.h: Initial version of support for
-	Solaris on PowerPC.
-
-Wed Jun  5 01:52:57 1996  James G. Smith  <jsmith@cygnus.co.uk>
-
- 	* configure.in (configdirs): Force 4100 builds to use 4300 GDB
-  	target.
-	* configure: Rebuild.
-
-	* config/mips/vr4300el.mt (SIM_OBS): Include simulator in
- 	little-endian builds.
-	
-Mon Jun  3 11:48:29 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* inftarg.c (child_thread_alive): Protect declaration with
-	#ifndef CHILD_THREAD_ALIVE.
-
-	* source.c (find_source_lines): Check the time on the symtab's bfd if
-	it exists, else check the time on the exec_bfd.
-
-Thu May 30 09:43:17 1996  Mark Alexander <marka@cygnus.com>
-
-	* dsrec.c (make_srec):  Fix calculation of address size
-	to allow addresses less than 0x100.
-
-Thu May 30 04:24:09 1996  Wilfried Moser  <moser@rtl.cygnus.com>
-
-	* ch-exp.c (ch_lex): In case of LOC_TYPEDEF call calculate_array_length.
-
-Tue May 28 16:15:47 1996  Geoffrey Noer  <noer@cygnus.com>
-
-	* remote-mips.c: cannot use EINVAL for breakpoint test since
-	its value varies for different hosts (e.g. go32's is 19, while
-	sunos is 22).  Changed to hardcoded 22 since that is what the
-	mips boards return.
-
-Tue May 28 11:14:58 1996  Tom Tromey  <tromey@creche.cygnus.com>
-
-	* configure: Regenerated.
-	* aclocal.m4 (CY_AC_PATH_TCLH): Don't use AC_TRY_RUN.
-	(CY_AC_PATH_TKH): Don't use AC_TRY_RUN.
-
-Sun May 26 16:56:35 1996  Miles Bader  <miles@gnu.ai.mit.edu>
-
-	* solib.c (solib_absolute_prefix, solib_search_path): New variables.
-	(_initialize_solib): Add set/show commands for those variables.
-	(solib_map_sections): Implement searching using them.
-
-Sun May 26 14:14:49 1996  Fred Fish  <fnf@cygnus.com>
-
-	Changes from: David Mosberger-Tang  <davidm@azstarnet.com>
-
-	* NEWS:  Add Alpha Linux as a new native configuration.
-
-	* mdebugread.c (parse_symbol): When we find a malloc() symbol with
- 	return type VOID, assume no debugging info is available for that
- 	object file and patch the return value into VOID *.  Otherwise,
-	operations requiring an implicit call to malloc() will fail.
-
-	* infrun.c (wait_for_inferior): The criterion to detect entering a
- 	sigtramp handler is now: (a) the current pc is inside a sigtramp
- 	handler, (b) the previous pc is not in a sigtramp handler, and (c)
- 	the current stack pointer is "inner" than the old one.  Condition
-	(c) is new to avoid mistaking a return from a signal handler into
- 	sigtramp as a new sigtramp invocation.
-
-	* dcache.c (struct dcache_block): Declare addr as CORE_ADDR.  An
- 	int may not be big enough to hold an address.
-	(dcache_hit): Ditto.
-	(dcache_peek_byte): Fix indentation.
-
-	* configure.in (alpha-*-linux*): Add target.
-	* configure: Rebuild
-
-	* config/alpha/tm-alpha.h (PROC_DESC_IS_DYN_SIGTRAMP): New macro.
-	(SET_PROC_DESC_IS_DYN_SIGTRAMP): Ditto.
-	(DYNAMIC_SIGTRAMP_OFFSET): Ditto.
-	(SIGCONTEXT_ADDR): Ditto.
-	(FRAME_PAST_SIGTRAMP_FRAME): Ditto.
-
-	* config/alpha/alpha-linux.mh: New file.
-	* config/alpha/alpha-linux.mt: Ditto.
-	* config/alpha/nm-linux.h: Ditto.
-	* config/alpha/tm-alphalinux.h: Ditto.
-	* config/alpha/xm-alphalinux.h: Ditto.
-	* config/alpha/xm-alphaosf.h: Renamed from xm-alpha.h.
-	* config/alpha/alpha-osf1.mh (XM_FILE): Change from xm-alpha.h to
- 	xm-alphaosf.h.
-	* config/alpha/alpha-osf2.mh: Ditto.
-
-	* blockframe.c (find_pc_partial_function): Pass PC to
- 	SIGTRAMP_START and SIGTRAMP_END macros for the benefit of systems
- 	that detect sigtramp code via designated code sequences (as is the
- 	case for Linux/Alpha, for example).
-	
-	* config/i386/tm-i386bsd.h: Change SIGTRAMP_START and SIGTRAMP_END
-	to ignore new PC argument.
-	* config/m68k/tm-hp300bsd.h: Ditto.
-	* config/vax/tm-vax.h: Ditto.
-
-	* alpha-tdep.c (alpha_linux_sigtramp_offset): New function.
-	(alpha_osf_skip_sigtramp_frame): Ditto.
-	(push_sigtramp_desc): Ditto.
-	(alpha_find_saved_regs): Use SIGCONTEXT_ADDR macro to extract
- 	sigcontext address from frame.
-	(alpha_saved_pc_after_call): When in sigtramp, use
- 	alpha_frame_saved_pc() instead of read-register().
-	(after_prologue): When inside a dynamically generated sigtramp
- 	function, there is no prologue, so return address of first
- 	instruction.
-	(alpha_in_prologue): Fix typo in comment.
-	(find_proc_desc): Use macro DYNAMIC_SIGTRAMP_OFFSET to determine
- 	whether we're inside a dynamicaly generated sigtramp function.  If
- 	so, create and push and appropriate procedure descriptor.
-	(alpha_frame_chain): Use macro FRAME_PAST_SIGTRAMP_FRAME to obtain
- 	the frame past a sigtramp frame (if the current frame is indeed a
- 	sigtramp function).
-	(init_extra_frame_info): Don't read next frame register off of
- 	stack-pointer when inside a dynamiccaly generated sigtramp.
-	(alpha_pop_frame): Also unlink and destroy procedure descriptors
- 	created for dynamically generated sigtramp functions.
-
-	* alpha-nat.c: When compiling under Linux, include <asm/reg.h> and
- 	<alpha/ptrace.h> instead of <machine/reg.h>
-
-Tue Jul  2 13:58:10 1996  Miles Bader  <miles@gnu.ai.mit.edu>
-
-	* gnu-nat.c (inf_validate_task_sc):
-	Give terminal to gdb while asking question.
-	(inf_resume): Don't validate the task suspend-count while execing.
-
-Thu Jun 13 11:04:52 1996  Miles Bader  <miles@gnu.ai.mit.edu>
-
-	* gnu-nat.c (inf_validate_task_sc): Query user before clearing any
-	additional suspend count.
-	(S_proc_wait_reply, gnu_attach): Don't call inf_validate_task_sc.
-	(inf_resume): Call inf_validate_task_sc here.
-	(gnu_resume): Call inf_update_procs to ensure noticing new threads.
-
-Fri Jun  7 17:00:43 1996  Miles Bader  <miles@gnu.ai.mit.edu>
-
-	* gnu-nat.c (gnu_create_inferior: attach_to_child): Return PID.
-
-Thu May 23 15:13:56 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* h8300-tdep.c (IS_PUSH): Refine.
-	(IS_MOVE_FP, IS_MOV_SP_FP): Accept H8/300H varaints.
-	(IS_SUB4_SP, IS_SUBL_SP): New macros.
-	(h8300_skip_prologue): Handle H8/300H prologue code sequences.
-	(examine_prologue): Handle addresses from 0x010000 to 0xffffff
-	when in H8/300H mode.  Get the return pointer's address correctly
-	for the H8/300H.  Handle H8/300H prolouge code sequences.
-
-	* symfile.c (generic_load): Print the starting address
-	of the file just loaded.
-
-Thu May 23 12:09:52 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* mpw-make.sed: Edit @THREAD_DB_OBS@ out of makefile.
-
-Tue May 21 11:53:56 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
-
-	* breakpoint.c (bpstat_do_actions):  Avoid endless recursion
-	if a `source' command is contained in bs->commands.
-
-	* infrun.c (wait_for_inferior):  Update step_frame_address when
-	stepping into a new line.
-
-	From schwab@issan.informatik.uni-dortmund.de (Andreas Schwab):
-	* breakpoint.c (breakpoint_1):  Add shlib_disabled case to
-	bpenables array.
-
-Mon May 20 22:52:00 1996  Mark Alexander  <marka@cygnus.com>
-
-	* dsrec.c (load_srec): Add WAITACK parameter, for machines
-	like EST visionICE that send back an ACK after each S-record.
-	* monitor.c (monitor_wait_srec_ack): New function.
-	(monitor_load): Pass monitor_wait_srec_ack to load_srec
-	if the monitor's MO_SREC_ACK flag is set.
-	* monitor.h: Define MO_SREC_ACK flag.
-	* remote-est.c (est_cmds): Add MO_SREC_ACK flag.
-	* sh3-rom.c (sh3_load): Accomodate change in load_srec prototype.
-	* srec.h: Add WAITACK parameter to load_srec prototype.
-
-Sun May 19 21:22:00 1996  Rob Savoye  <rob@chinadoll>
-
-	* config/sparc/sparclite.mt: Add the sparc simulator.
-
-Sun May 19 16:49:37 1996  Fred Fish  <fnf@cygnus.com>
-
-	* defs.h (read_command_lines, query_hook): Update prototypes.
-	(readline_begin_hook, readline_hook, readline_end_hook): Declare.
-	* breakpoint.c (commands_command): Build message in temporary buffer
-	and pass that, as well as tty control flag, to read_command_lines.
-	* top.c (readline_begin_hook, readline_hook, readline_end_hook):
-	Define here.
-	(command_loop): Check for non-NULL instream before looping.
-	(command_line_input): Use readline_hook when appropriate, to get
-	user input from a GUI window.
-	(read_next_line): Also build prompt if getting user input from a GUI.
-	(recurse_read_control_structure): Fix typo in comment.
-	(read_command_lines): Use passed in prompt and tty flag to decide how
-	to build message.  Use readline_begin_hook when appropriate, to set
-	up a GUI interaction window.  Just return head, whether NULL or not,
-	after using readline_end_hook to complete GUI interaction.
-	(define_command, document_command): Build message in a temporary
-	buffer and pass it to read_command_lines, along with tty flag.
-
-
-Sat May 18 02:43:58 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
-
-	* blockframe.c (frameless_look_for_prologue):
-	Add FUNCTION_START_OFFSET only if func_start is non-zero.
-	* minsyms.c (lookup_minimal_symbol_by_pc):  Return NULL if
-	pc is not in a known section.
-	* stack.c (print_frame_info):  Remove check for fi->pc in known
-	section, now handled by lookup_minimal_symbol_by_pc.
-
-
-Fri May 17 13:31:04 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* sh-stub.c: New file, was config/sh/stub.c.
-
-
-Wed May 15 08:25:12 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* top.c (read_next_line): Fix thinkos.  From Donn Seeley.
-
-	* coffread.c (coff_symtab_read): Handle C_LABEL symbols like
-	C_STAT symbols.
-	* h8300-tdep.c (h8300_pop_frame): Reset $sp and $pc correctly.
-	Flush cached frames just before exiting.
-	* remote-sim.c (gdbsim_resume): Complain if the program isn't
-	being run.
-	* config/h8300/tm-h8300.h (BELIEVE_PCC_PROMOTION): Define.
-
-Tue May 14 18:05:16 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* procfs.c (procfs_thread_alive procfs_stop):  Make static.
-	(procfs_pid_to_str):  New routine to print out thread id's in an
-	intelligible manner.
-	* sol-thread.c (sol_thread_fetch_registers):  Re-order manner in
-	which supply_register is called to fix bug with writing
-	individual regs.
-	* config/sparc/tm-sun4sol2.h:  Define default for
-	target_pid_to_str in case host lacks libthread_db.
-
-Mon May 13 23:53:30 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* Makefile.in config.in configure configure.in
-	config/sparc/nm-sun4sol2.h config/sparc/sun4sol2.mh
-	config/sparc/tm-sun4sol2.h:  Use autoconf to config Solaris thread
-	and pthread support, since pre-2.5 systems don't come with
-	libthread_db.so.1.
-
-	* procfs.c (info_proc):  Use int instead of id_t.  Old versions of
-	Irix don't seem to define this.
-
-Mon May 13 17:40:58 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* top.c (execute_control_command, case while_control): Allow
-	a while command to be interrupted.
-
-Mon May 13 16:17:36 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* sol-thread.c:  More cleanup, add comments.
-	(sol_thread_resume):  Prevent people from trying to step
-	inactive threads.
-	(sol_thread_wait sol_thread_fetch_registers
-	sol_thread_store_registers):  Remove unnecessary check for
-	sol_thread_active.  These routines won't get called unless threads
-	are active.
-
-Mon May 13 11:29:37 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	SH3-E support from Allan Tajii <atajii@hmsi.com>:
-	* sh-tdep.c (sh_reg_names, sh3_reg_names): Add empty names for
-	float registers.
-	(sh3e_reg_names): New register name array.
-	(sh_processor_type_table): Add sh3e processor type.
-	* config/sh/tm-sh.h (REGISTER_VIRTUAL_TYPE): Fix test.
-	(REGISTER_NAMES, NUM_REGS, NUM_REALREGS, etc): Adjust for
-	full set of registers.
-	* remote-e7000.c (want_sh3, want_sh3_nopc): New globals.
-	(e7000_fetch_registers, e7000_wait): Use them.
-	* sh3-rom.c (sh3_regnames): Add float registers.
-	(sh3e_cmds, sh3e_ops): New globals.
-	(sh3e_open): New function.
-	(_initialize_sh3_rom): Rename from _initialize_sh3, set up
-	sh3e target vector.
-
-Fri May 10 15:53:38 1996  Stu Grossman  (grossman@lisa.cygnus.com)
-
-	* sol-thread.c:  Cleanup.  gcc -Wall fixes.  Add prototypes.
-	Print out messages instead of codes for thread_db errors.  Make
-	access macros for thread and lwp manipulation.  Make cleanups to
-	fixup inferior_pid in case of errors.
-
-Thu May  9 19:06:02 1996  Fred Fish  <fnf@cygnus.com>
-
-	* aclocal.m4: Remove unused definition of AC_C_CROSS.
-	* configure.in: Add powerpcle-*-solaris* host and target config
-	so April 30th change does not get lost next time configure is
-	rebuilt.
-
-Thu May  9 14:13:08 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* Makefile.in, breakpoint.c, corelow.c, fork-child.c, inflow.c,
-	infrun.c, mac-nat.c, procfs.c, remote.c, sol-thread.c, thread.c,
-	win32-nat.c, config/nm-lynx.h:  Rename thread.h to gdbthread.h to
-	avoid conflict with Solaris /usr/include/thread.h.
-
-Thu May  9 12:33:32 1996  Rob Savoye  <rob@chinadoll.cygnus.com>
-
-	* abug-rom.c: Config file for the older style ABug monitor that
-	runs on the mvme13x boards.
-	* config/m68k/monitor.mt: Add abug support for m68k cross
-	debugging.
-
-Wed May  8 20:33:24 1996  Fred Fish  <fnf@cygnus.com>
-
-	* infcmd.c (do_registers_info):  Always print the raw floating
-	point value's bytes in big endian order, so the the leftmost bit
-	is the most significant.
-	* breakpoint.c (clear_momentary_breakpoints): Remove dead code
-	that is referenced nowhere else.
-	(set_breakpoint): Ditto.
-	(do_enable_breakpoint): Created from enable_once_breakpoint
-	with a couple of changes.
-	(enable_breakpoint): Call do_enable_breakpoint with an appropriate
-	bpdisp enum value to set disposition of breakpoint.
-	(enable_once_breakpoint): Ditto.
-	(enable_delete_breakpoint): Ditto.
-	* breakpoint.h (clear_momentary_breakpoints): Remove prototype.
-	* symtab.c (find_pc_line): Improve comments.
-	* xcoffread.c: Ditto.
-
-Tue May  7 18:37:06 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* target.c (debug_to_xfer_memory): Insert line breaks when
-	dumping the memory block.
-
-Mon May  6 13:52:52 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* fork-child.c (fork_inferior), inferior.h:  init_trace_fun now
-	returns a possibly modified pid.
-	* inftarg.c (ptrace_him):  Now returns pid;
-	* m3-nat.c (m3_trace_him):  Now returns pid;
-	* infcmd.c (run_command):  Minor cleanup.
-	* infrun.c (wait_for_inferior):  Add another check for one_stepped
-	near where we read the pc to avoid erroneously setting
-	random_signal for multi-threaded support.
-	* procfs.c:  Add support for Solaris LWPs.  Remove def of
-	LOSING_POLL.  Many cleanups...  Several workarounds for Solaris
-	lossage.  System call entry and exit are now handled by
-	dynamically registered handlers.
-	* (syscallname):  Don't barf when handed an unknown syscall
-	number.
-	* (info_proc_syscalls):  Ditto.
-	* sol-thread.c:  New file.  Implements Solaris thread support.
-	* symfile.c (symbol_file_add):  Add call to target_new_objfile to
-	notify target-dependent code about new symbol tables.
-	* (clear_symtab_users):  Call target_new_objfile to notify it of
-	the removal of all symbol tables.
-	* target.c (push_target):  Make sure that to_close is non-zero
-	before calling it.
-	* target.h (target_new_objfile):  Provide default.	
-	* config/alpha/nm-osf2.h:  Define LOSING_POLL because this version
-	of OSF can't hack using poll with /proc.
-	* config/sparc/nm-sun4sol2.h (target_new_objfile):  Define to be
-	sol-thread-new-objfile.
-	* config/sparc/sun4sol2.mh:  Add sol-thread.o to NATDEFFILES, and
-	add libthread_db.so.1 to NAT_CLIBS.
-	* config/sparc/tm-sun4sol2.h:  Define PIDGET, TIDGET, and
-	target_pid_to_str.
-
-Sat May  4 02:13:34 1996  N Srin Kumar  <nsrin@wipinfo.soft.net>
-
-	* procfs.c (remove_fd):  Fix copy of fds to fill hole left after
-	removal of the requested fd.
-
-Mon May  6 07:52:48 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* rs6000-tdep.c (_initialize_rs6000_tdep): Don't do XCOFF specific
-	hooks under ELF.
-
-	* config/powerpc/tm-ppc-eabi.h: Define ELF_OBJECT_FORMAT.
-
-Thu May  2 12:46:14 1996  Jeffrey A Law  (law@cygnus.com)
-
-	From Peter Schauer:
-	* breakpoint.h (enum bpdisp):  Add del_at_next_stop.
-	* breakpoint.c (insert_breakpoints, watchpoint_check,
-	bpstat_stop_status):  Avoid bad references to memory freed via
-	delete_breakpoint on watchpoints going out of scope.
-	Do not delete these watchpoints, disable them and change their
-	disposition to del_at_next_stop instead.
-	(breakpoint_auto_delete):  Delete all breakpoints whose disposition
-	is del_at_next_stop.
-	(breakpoint_init_inferior):  Use switch to avoid reference to
-	already deleted breakpoint.
-
-Wed May  1 17:29:18 1996  Fred Fish  <fnf@cygnus.com>
-
-	* Makefile.in (rs6000-nat.o): Depend on xcoffsolib.h.
-	* config/rs6000/rs6000.mh (NATDEPFILES): Move xcoffread.o ...
-	* config/rs6000/rs6000.mt (TDEPFILES): ... to here.
-	* xcoffsolib.c (xcoff_relocate_symtab_hook): Define and initialize.
-	(solib_info): Call xcoff_relocate_symtab via the hook.
-	(sharedlibrary_command): Ditto.
-	* xcoffread.c: Remove all FAKING_RS6000 comments and defines.
-	(xcoff_add_toc_to_loadinfo_hook): Define and initialize here.
-	(xcoff_init_loadinfo_hook): Define and initialize here.
-	(scan_xcoff_symtab): Call xcoff_add_toc_to_loadinfo via the hook.
-	(xcoff_initial_scan): Call xcoff_init_loadinfo via the hook.
-	* xcoffsolib.h (xcoff_relocate_symtab_hook): Declare extern func.
-	* rs6000-tdep.c (_initialize_rs6000_tdep): Add initializations
-	of xcoff_add_toc_to_loadinfo_hook and xcoff_init_loadinfo_hook.
-	* rs6000-nat.c (_initialize_core_rs6000): Add initialization
-	of xcoff_relocate_symtab_hook.
-
-Tue Apr 30 13:22:02 1996  Michael Meissner  <meissner@tiktok.cygnus.com>
-
-	* configure (powerpcle-*-solaris*): Add Solaris support.
-
-	* config/powerpc/{solaris.m[ht],tm-solaris.h}: New files for
-	Solaris support.
-
-Mon Apr 29 16:17:31 1996  Dawn Perchik <dawn@cygnus.com>
-
-	* c-valprint.c (c_val_print): Fix printing for arrays defined 
-	with 0 length.
-
-Sun Apr 28 15:08:05 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	Support for bi-endian remote breakpoints.
-	* remote.c (big_break_insn, little_break_insn): New globals.
-	(break_insn): Remove.
-	(remote_insert_breakpoint, remote_remove_breakpoint): Use own
-	code if REMOTE_BREAKPOINT defined, otherwise call memory
-	breakpoint functions.
-	* config/sh/tm-sh.h (REMOTE_BREAKPOINT): Remove.
-	(BIG_REMOTE_BREAKPOINT, LITTLE_REMOTE_BREAKPOINT): Define.
-
-	* mon960-rom.c (mon960_cmds): Remove forward decl.
-	(mon960_load): Use current_monitor instead of mon960_cmds.
-	(mon960_regnames): Remove backslashes from line ends.
-	(_initialize_mon960): Fix documentation string.
-
-Sun Apr 28 12:10:35 1996  Fred Fish  <fnf@cygnus.com>
-
-	* symfile.h (psymbol_allocation_list):  Expand comments which
-	describe the psymbol allocation list and how each field is
-	used.
-
-Sun Apr 28 03:44:30 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
-
-	* breakpoint.c (delete_breakpoint):  Fix bpt->val, bpt->exp
-	storage leaks.
-	(breakpoint_re_set_one):  Fix b->exp, b->val, b->cond storage leaks.
-
-	* infcmd.c (run_command), solib.c (locate_base):  Check for
-	target_has_execution in addition to inferior_pid, a core file
-	from a threaded program is yielding a non-zero inferior_pid.
-
-	* sparc-tdep.c (get_saved_register):  Handle window registers
-	in a dummy frame correctly.
-
-Sat Apr 27 20:38:32 1996  Fred Fish  <fnf@cygnus.com>
-
-	* Makefile.in (CLIBS): Move $(MMALLOC) past all other libs,
-	so that anything that wants an allocation function not yet pulled
-	in, will get it from mmalloc rather than a system library.
-	* Makefile.in (INSTALLED_LIBS): Reorder to match order of CLIBS,
-	to avoid surprising results when used.
-
-Sat Apr 27 00:12:05 1996  Dawn Perchik  (dawn@cygnus.com)
-
-	* stabsread.c: Changes and bug fixes for cfront support.
-	Fix bug for class data members.
-	Fix parsing bug when no base classes exist.
-	Fix memory bug - allocate space for cplusplus specific info.
-	Add support for static data.
-	Add prototypes for static functions.
-	Enhance comments to show what each function expects to parse.
-	Cleanup code.
-	* stabsread.c(resolve_cont),dbxread.c(resolve_cont): Rename 
-	function to resolve_cfront_continuation.
-
-Fri Apr 26 23:58:26 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* infrun.c (wait_for_inferior): Call registers_changed when
-	restarting the inferior to get over a nullified instruction.
-	
-Tue Apr 24 12:12:55 1996  Dawn Perchik (dawn@cygnus.com)
-
-	* dbxread.c,stabsread.c,gdbtypes.c,partial-stab.h,valops.c: 
-	Add new support for parsing cfront stabs.
-
-Wed Apr 24 00:32:55 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* infrun.c (wait_for_inferior): Move "have_waited" label
-	outside of #ifdef conditionals.  Don't trash the wait status
-	if we get a signal and the current instruction is nullified.
-
-Mon Apr 22 20:17:01 1996  Fred Fish  <fnf@cygnus.com>
-
-	* Makefile.in (VERSION): Bump version number to 4.16.1.
-	* NEWS: Update for 4.16 release.
-
-Mon Apr 22 16:32:29 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* monitor.h: Clean up comment formatting.
-	(current_monitor): Remove decl.
-	(LOADTYPES, LOADPROTOS, INIT_CMD, etc): Remove definitions.
-	(push_monitor, SREC_SIZE): Remove.
-	* monitor.c: Expand old macro into current_monitor derefs
-	everywhere.
-	* remote-os9k.c (current_monitor): Remove definition.
-
-Mon Apr 22 14:54:45 1996  Mark Alexander  <marka@superball.cygnus.com>
-
-	* corefile.c (specify_exec_file_hook): Allow arbitrary number of
- 	hooks.
-	(call_extra_exec_file_hooks): New function.
-	* h8300-tdep.c: Lint; add .h files to provide missing declarations,
-	remove unused variables.
-	(set_machine_hook): New function.
-	(_initialize_h8300m): Initialize it.
-
-Fri Apr 19 15:03:49 1996  Ian Lance Taylor  <ian@cygnus.com>
-
-	* remote-mips.c (encoding): Don't specify size, to avoid bug in
-	SunOS native compiler.
-
-Thu Apr 18 18:46:57 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* monitor.c: Use int rather than LONGEST for values, since
-	the formatting strings are not prepared to accept long longs.
-
-Wed Apr 17 20:17:27 1996  Doug Evans  <dje@canuck.cygnus.com>
-
-	* arm-tdep.c (initialize_arm_tdep): Make apcs32 a `zinteger'.
-
-Tue Apr 16 17:38:23 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* corelow.c (add_to_thread_list):  Make sure reg_sect is non-null
-	before de-referencing it.  Prevents deref of NULL pointer if core
-	file lacks .reg section.
-	* defs.h:  Rename floatformat_{to from}_long_double to
-	floatformat_{to from}_doublest.  Get rid of FLOATFORMAT_{TO
-	FROM}... macros.
-	* findvar.c (extract_floating store_floating):  Change all refs to
-	FLOATFORMAT_{FROM TO}... to floatformat_{from to}_doublest.
-	* utils.c:  Change floatformat_{to from}_long_double to
-	floatformat_{to from}_doublest cuz the new routines will use
-	whatever size (double or long double) is appropriate.
-	* config/i960/tm-i960.h (REGISTER_CONVERT_TO_VIRTUAL
-	REGISTER_CONVERT_TO_RAW):  Change FLOATFORMAT... macros to
-	floatformat... routine calls.
-
-Mon Apr 15 16:34:11 1996  Per Bothner  <bothner@kalessin.cygnus.com>
-
-	* stabsread.c (read_type):  Move handling of '@' from type
-	number handling to handling of types proper (as emitted by gcc!).
-	For typedefs, allocate the typedef type before reading its
-	definition, to properly handling recursive types.
-
-Mon Apr 15 11:19:26 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* ch-exp.c (calculate_array_length): Fix prototype.
-
-Sat Apr 13 14:21:16 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* remote-nindy.c (nindy_open):  Acquire more target state so that
-	user can attach to a previously running program.
-	* (nindy_fetch_registers nindy_store_registers):  Get rid of fp
-	conversion code.  That's all handled in {extract store}_floating
-	now.
-	* utils.c (floatformat_to_double):  Don't bias exponent when
-	handling zero's, denorms or NaNs.
-	* config/i960/tm-i960.h (REGISTER_CONVERT_TO_VIRTUAL
-	REGISTER_CONVERT_TO_RAW):  Change to using DOUBLST and
-	FLOATFORMAT_TO/FROM_DOUBLEST macros.
-	* config/i960/tm-nindy960.h:  Undefine
-	REGISTER_CONVERT_TO_VIRTUAL, REGISTER_CONVERT_TO_RAW, and
-	REGISTER_CONVERTIBLE.  These are no longer necessary now that all
-	the magic happens in extract/store_floating.
-
-Sat Apr 13 02:58:02 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
-
-	* eval.c (evaluate_subexp_standard):  Report error when attempting to
-	evaluate subscripts for types which cannot be subscripted.
-
-	* valarith.c (value_x_binop, value_x_unop):  Add noside parameter.
-	Return a zero value with the return type of the member function
-	if noside is EVAL_AVOID_SIDE_EFFECTS instead of calling the member
-	function.
-	* values.h (value_x_binop, value_x_unop):  Update prototypes
-	accordingly.
-	* eval.c (evaluate_subexp_standard):  Update all callers of
-	value_x_binop, value_x_unop accordingly.
-
-	* valarith.c (value_neg, value_complement):  Perform ANSI C/C++
-	integral promotion on operands.
-
-Fri Apr 12 13:19:27 1996  Fred Fish  <fnf@cygnus.com>
-
-	* README: Update for 4.16 release.
-	* configure.in (AC_CHECK_FUNCS): Also check for sbrk.
-	* configure: Regenerate with autoconf.
-	* config.in: Regenerate with autoheader.
-	* main.c (main): Only use sbrk() when HAVE_SBRK is defined.
-	* top.c (command_loop): Ditto.
-
-Fri Apr 12 09:45:29 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* defs.h:  Define TARGET_{FLOAT DOUBLE LONG_DOUBLE}_FORMAT
-	defaults for bi-endian targets.  Replace function pointers for
-	floatformat routines with macros.  No need for these to be runtime
-	selectable.
-	* findvar.c:  Get rid of floatformat function pointers.  Use
-	macros in extract_floating and store_floating.
-	* remote-nindy.c (nindy_fetch_registers nindy_store_registers):
-	Use floatformat macros.
-
-Thu Apr 11 21:28:02 1996  Fred Fish  <fnf@cygnus.com>
-
-	From: Miles Bader  <miles@gnu.ai.mit.edu>
-	* configure.in (AC_CHECK_HEADERS): check for endian.h.
-	Use AC_CHECK_TOOL to find AR & RANLIB.  Add AC_PROG_AWK.
-	Add host & target cases for i[345]86-*-gnu*.
-	* config.in: Regenerate with autoheader.
-	* configure: Regenerate with autoconf.
-	* Makefile.in (AR, AWK): Set from corresponding autoconf substs.
-	(init.c): Don't scan mig-generated files.
-	* defs.h (endian.h): Include if HAVE_ENDIAN_H defined.
-	* config/nm-m3.h (ATTACH_NO_WAIT): Define.
-	* infcmd.c (attach_command): Use "#ifndef ATTACH_NO_WAIT"
- 	rather than "#ifndef MACH".
-
-Thu Apr 11 18:49:42 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* remote.c (remotewritesize): New GDB variable, controls size
-	of memory packets sent to the target.
-
-Thu Apr 11 13:47:52 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* dcache.c:  Add prototypes.  Make many functions static.
-	* (dcache_peek dcache_fetch dcache_poke):  Make dcache_fetch and
-	dcache_poke call dcache_xfer_memory directly in order to fix
-	problems with turning off dcache.  dcache_peek is now unnecessary,
-	so it goes away.
-
-	* defs.h:  Define new macros HOST_{FLOAT DOUBLE	LONG_DOUBLE}_FORMAT 
-	and TARGET_{FLOAT DOUBLE LONG_DOUBLE}_FORMAT to specify a pointer
-	to a struct floatformat.  This allows for better handling of
-	targets whose floating point formats differ from the host by more
-	than just byte order.
-	* (floatformat_to_long_double floatformat_from_long_double):
-	Prototypes for new functions in utils.c.
-	* (floatformat_to_doublest floatformat_from_doublest):  Prototypes
-	for pointers to floating point conversion functions.  The actual
-	function uses either double or long double if the host supports it.
-	* findvar.c (floatformat_to_doublest floatformat_from_doublest):
-	Initialize to point at correct function depending on HAVE_LONG_DOUBLE.
-	* (extract_floating store_floating):  Rewrite.  Now, if host fp
-	format is the same as the target, we just do a copy.  Otherwise,
-	we call floatformat_{to from}_doublest.
-	* remote-nindy.c (nindy_xfer_inferior_memory):  Change param
-	`write' to `should_write'.
-	* utils.c (floatformat_to_long_double
-	floatformat_from_long_double):  New routines that implement long
-	double versions of functions in libiberty/floatformat.c.
-	* config/i960/tm-i960.h (TARGET_LONG_DOUBLE_FORMAT):  Define this for
-	i960 extended real (80 bit) numbers.
-	* nindy-share/nindy.c (ninMemGet ninMemPut):  Return number of bytes
-	actually read or written.
-
-Wed Apr 10 02:56:06 1996  Wilfried Moser  <moser@rtl.cygnus.com>
-
-	* ch-valprint.c (chill_val_print): Remove call to calculate_array_length.
-	(calculate_array_length): Move function from here ...
-
-	* ch-exp.c (calculate_array_length): ... to here.
-	(parse_primval): If we have a symbol with an array type
-	and the length is 0, call calculate_array_length.
-
-Tue Apr  9 01:23:05 1996  Wilfried Moser  <moser@rtl.cygnus.com>
-
-	* eval.c (evaluate_subexp_standard): In case of TYPE_CODE_SET:
-	Add some checks for powerset compatibility.
-
-	* valops.c (value_slice): Use lowbound instead of lowerbound for
-	call to slice_range_type to get correct bounds.
-
-Mon Apr  8 12:53:56 1996  Fred Fish  <fnf@cygnus.com>
-
-	* Makefile.in (scm-exp.o, scm-lang.o, scm-valprint.o): Add targets and
-	dependencies.
-	* scm-lang.c (gdb_string.h): Include.
-	* objfiles.c (add_to_objfile_sections): Cast second arg of obstack_grow
-	call to correct type (char *).
-	* cp-valprint.c (cp_print_static_field): Ditto.
-	* somsolib.c (som_solib_create_inferior_hook): Add a declaration
-	for external find_unwind_entry function (from hppa-tdep.c).
-	* remote-pa.c (remote_write_bytes, remote_read_bytes): Change
-	type of second arg to "char *" to be type compatible with
-	dcache.
-	(remote_wait): Cast second arg to strtol to correct type.
-	* hppa-tdep.c (compare_unwind_entries): Change argument types to
-	"const void *" to be type compatible with qsort, and then
-	assign to local args prior to use.
-
-Mon Apr  8 15:35:52 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* infptrace.c (kill_inferior): Remove call to "kill"; update
-	comments.
-
-Mon Apr  8 14:05:07 1996  Geoffrey Noer  <noer@cygnus.com>
-
-	* remote-e7000.c: don't append :23 to target port if __WIN32__
-	is defined (it's WinGDB).
-
-Sun Apr  7 22:34:29 1996  Fred Fish  <fnf@cygnus.com>
-
-	From: Miles Bader  <miles@gnu.ai.mit.edu>
-	* gnu-nat.c, gnu-nat.h, msg.defs, exc_request.defs, i386gnu-nat.c,
-	msg_reply.defs, notify.defs, process_reply.defs, reply_mig_hack.awk,
-	config/nm-gnu.h, config/i386/{i386gnu.mh, i386gnu.mt, nm-gnu.h,
-	m-i386gnu.h, xm-i386gnu.h}: New files for GNU hurd.
-
-Sun Apr  7 13:32:41 1996  Fred Fish  <fnf@cygnus.com>
-
-	* configure.in (case host): Add i386sco5 host.
-	* configure: Regenerate.
-	
-	From: Robert Lipe <robertl@dgii.com>
-	Add support for SCO OpenServer 5 (a.k.a. 3.2v5*)  This
-	target is an SVR3.2 with COFF, ELF, and shared libes, but
-	no /proc.
-	* config/i386/i386sco5.mh:  New file.
-	* config/i386/nm-i386sco5.h:  New file.
-
-Sat Apr  6 08:55:22 1996  Fred Fish  <fnf@cygnus.com>
-
-	* bcache.c (bcache): When size of chunk to cache is exactly equal to
- 	BCACHE_MAXLENGTH, stash chunk as unique copy.
-
-Sat Apr  6 00:46:26 1996  Fred Fish  <fnf@cygnus.com>
-
-	* symfile.c (INLINE_ADD_PSYMBOL): Remove ifdef.
-	(add_psymbol_to_list): Add an arg for passing CORE_ADDR values and
-	use it, rather than calling add_psymbol_addr_to_list.
-	(add_psymbol_addr_to_list): Delete.
-	(add_psymbol_to_list): Make psymbol static to avoid random data in
-	gaps due to alignment of structure members.
-	* symfile.h (INLINE_ADD_PSYMBOL, ADD_PSYMBOL_TO_LIST,
- 	ADD_PSYMBOL_ADDR_TO_LIST): Remove.  Real world tests show no
-	performance improvements by inlining via complicated macros and
-	they just make gdb larger and harder to maintain.
-	* dwarfread.c (add_enum_psymbol): Replace ADD_PSYMBOL_TO_LIST
-	and/or ADD_PSYMBOL_ADDR_TO_LIST macro(s) with call to
-	add_psymbol_to_list with appropriate long or CORE_ADDR args.
-	(add_partial_symbol): Ditto.
-	* partial-stab.h: Ditto.
-	* os9kread.c (read_os9k_psymtab): Ditto
-	* mdebugread.c (parse_partial_symbols): Ditto.
-	(handle_psymbol_enumerators): Ditto.
-	(demangle.h): Include.
-	* hpread.c (hpread_build_psymtabs): Ditto.
-	(hpread_build_psymtabs): Ditto.
-	(demangle.h): Include
-
-Thu Apr  4 20:16:55 1996  Fred Fish  <fnf@cygnus.com>
-
-	* configure.in: Check for setpgid function.
-	* config.in: Regenerate with autoheader.
-	* configure: Regenerate with autoconf.
-	* inflow.c (_initialize_inflow): Only try to use _SC_JOB_CONTROL
-	if it is actually defined.
-	(gdb_setpgid): Use HAVE_SETPGID.
-	* ch-exp.c: Change include of <string.h> to "gdb_string.h".
-	* c-exp.y, f-exp.y, m2-exp.y: Ditto.
-	* c-exp.y, serial.c: Include <ctype.h>.
-	* config/m68k/nm-news.h: Add typedef for pid_t which is
-	apparently missing from <sys/types.h>.  Enclose entire
-	file in NM_NEWS_H ifndef and define when included.
-	* config/mips/nm-news-mips.h: Ditto.
-	* config/m68k/tm-m68k.h (REGISTER_CONVERT_TO_VIRTUAL,
-	REGISTER_CONVERT_TO_RAW): Change name of temporary variable.
-
-Thu Apr  4 19:04:18 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* arm-xdep.c: Move native-specific code to here from arm-tdep.c.
-	* arm-tdep.c (arm_apcs_32): New global.
-	(arm_addr_bits_remove, arm_saved_pc_after_call,
- 	arm_push_dummy_frame, arm_pop_frame): New functions.
-	(arm_skip_prologue): Updated version from Richard Earnshaw.
-	(_initialize_arm_tdep): Add set/show "apcs32".
-	* config/arm/tm-arm.h (ADDR_BITS_REMOVE): Call
-	arm_addr_bits_remove.
-	(SAVED_PC_AFTER_CALL): Call arm_saved_pc_after_call.
-	(frame_find_saved_regs): Declare properly.
-	(PUSH_DUMMY_FRAME): Call arm_push_dummy_frame.
-	(POP_FRAME): Call arm_pop_frame, use ADDR_BITS_REMOVE instead of
-	explicit mask.
-	* config/arm/nm-arm.h: New file.
-	* config/arm/xm-arm.h (KERNEL_U_ADDR, FETCH_INFERIOR_REGISTERS):
-	Move definitions to nm-arm.h.
-	* config/arm/arm.mh (NAT_FILE): Define.
-
-	* symfile.c (generic_load): Initialize data_count properly.
-
-Thu Apr  4 17:17:53 1996  Fred Fish  <fnf@cygnus.com>
-
-	* symmisc.c (print_objfile_statistics): Print memory used by
-	psymbol cache obstack.
-
-Thu Apr  4 15:43:07 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* symfile.c (report_transfer_performance): New function.
-	(generic_load): Call it to report transfer rate.
-	* remote-e7000.c (e7000_load): Ditto.
-
-Mon Apr  1 16:31:00 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* mpw-make.sed: Change references to config.h to be in objdir,
-	edit out rules to rebuild config.h.
-
-Mon Apr  1 08:32:23 1996  Fred Fish  <fnf@cygnus.com>
-
-	* hppa-tdep.c (hppa_pop_frame): Call clear_proceed_status before
-	proceeding.
-
-Sun Mar 31 16:15:43 1996  Fred Fish  <fnf@cygnus.com>
-
-	* hppah-nat.c (store_inferior_registers, store_inferior_registers,
-	fetch_register, child_xfer_memory): Use call_ptrace function supplied
-	by infptrace.c rather than calling ptrace directly.
-
-Sun Mar 31 15:39:00 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* mon960-rom.c: Cleanups and elimination of unused code,
-	clarify documentation string.
-	(mon960_serial, mon960_ttyname): Remove.
-	* config/i960/tm-mon960.h (ADDITIONAL_OPTIONS,
-	ADDITIONAL_OPTION_CASES, ADDITIONAL_OPTION_HELP): Remove.
-
-Sat Mar 30 11:00:22 1996  Fred Fish  <fnf@cygnus.com>
-
-	* configure.in: Check whether printf family supports printing
-	long doubles or not and define PRINTF_HAS_LONG_DOUBLE if so.
-	* acconfig.h: Provide default undef for PRINTF_HAS_LONG_DOUBLE.
-	* configure: Regenerate.
-	* valprint.c (print_floating): Use PRINTF_HAS_LONG_DOUBLE.
-	* c-exp.y (parse_number): Use PRINTF_HAS_LONG_DOUBLE.
-	* configure.in: Fix have_gregset and have_fpregset autoconf
-	variable names so that they match the pattern required to
-	cache them.
-
-Fri Mar 29 21:39:56 1996  Fred Fish  <fnf@cygnus.com>
-
-	* core-aout.c (fetch_core_registers): Cast core_reg_size to int
-	before testing against reg_ptr.
-	* eval.c (evaluate_subexp_standard): Cast type of
-	TYPE_FN_FIELD_VOFFSET to int.
-	* findvar.c (extract_signed_integer, extract_unsigned_integer,
-	extract_long_unsigned_integer): Cast type of sizeof to int.
-	* values.c (unpack_field_as_long, modify_field): Ditto.
-	* valops.c (value_assign, call_function_by_hand): Ditto.
-	* infcmd.c (do_registers_info): Ditto.
-	* ser-tcp.c (tcp_open): Ditto.
-	* remote.c (putpkt): Ditto.
-	* dcache.c (dcache_peek): Ditto.
-	* dcache.c (dcache_poke): Ditto.
-	* m2-exp.y (yylex): Ditto.
-	* gnu-regex.c (re_match_2): Ditto.
-	* f-lang.c (ADD_BF_SYMNUM, saved_bf_list_end, tmp_bf_ptr): Ifdef
-	out unused macro definition and variables.
-	* inftarg.c (proc_wait): Move from main.c to here, and make static.
-	* valprint.c (val_print_string): Change bufsize from int to unsigned.
-	* main.c (wait.h): Include.
-	* top.c (command_line_input): Remove unused variable "c".
-	* f-typeprint.c (f_type_print_varspec_prefix): Add missing enum
-	value TYPE_CODE_TYPEDEF to switch statement.
-	(f_type_print_varspec_suffix): Add missing enum value
-	TYPE_CODE_TYPEDEF to switch statement.
-	* ch-exp.c (parse_primval): Add remaining enumeration values to
-	switch statement, with no specific action.
-	(ch_lex): Add LOC_UNRESOLVED in switch statement.
-	(pushback_token): Ifdef out, since code using it is ifdef'd out.
-	* stabsread.c (cleanup_undefined_types): Remove unused label
-	"badtype".
-	* objfiles.h (print_symbol_bcache_statistics): Add prototype.
-	* maint.c (objfiles.h): Include.
-	(maintenance_print_statistics): Remove unused variable "temp".
-	* minsyms.c (lookup_minimal_symbol_solib_trampoline): Remove
-	unused variable "found_file_symbol".
-	* m2-exp.y (yylex): Add LOC_UNRESOLVED case to switch.
-	* language.c (lang_bool_type): Use existing function local type
-	variable rather than create block local variables.
-	* solib.c (disable_break): Enclose in ifndef SVR4_SHARED_LIBS.
-	* infptrace.c (wait.h, command.h): Include.
-	* ser-tcp.c (gdb_string.h): Include
-	* i386-tdep.c (codestream_seek): Change "place" to CORE_ADDR.
-	(i386_get_frame_setup): Change "pc" from int to CORE_ADDR.
-	* command.c (complete_on_enum): Make assignment used as truth value
-	explictly check against NULL.
-	(wait.h): Include.
-	* infrun.c (wait_for_inferior): Ifdef out prologue_pc since code
-	that uses it is ifdef'd out.
-	* parser-defs.h: Add prototype for write_dollar_variable.
-	* infrun.c: Add prototype for write_pc_pid.
-	* breakpoint.h: Add prototype for re_enable_breakpoints_in_shlibs.
-	* symmisc.c (bcache.h): Include.
-	* bcache.h: Add prototype for print_bcache_statistics.
-	* symfile.c: Include <time.h>.
-	* printcmd.c (print_scalar_formatted): Change len to unsigned int.
-	* valarith.c (value_equal): Cast result of TYPE_LENGTH to int.
-	* valarith.c (value_binop): Change result_len, promoted_len1,
- 	and promoted_len2 to unsigned int.
-	* valarith.c (value_subscripted_rvalue): Change elt_offs and
- 	elt_size to unsigned int.
-	* valops.c (value_array): Change typelength to unsigned int.
-	(destructor_name_p): Change len to unsigned int.
-	* scm-lang.h (scm_parse): Add prototype for scm_unpack.
-	* symfile.c (decrement_reading_symtab): Change return type to void.
-	* valarith.c (value_subscript): Remove unused variable "word".
-	(value_subscript): Remove unused variable "tint".
-	* valops.c (auto_abandon): Ifdef out, since code using it is also
-	ifdef'd out.
-	* eval.c (init_array_element): Remove unused variable "val".
-	* Makefile.in (values.o): Depends on scm-lang.h.
-	(command.o): Depends upon wait_h.
-	(ser-tcp.o): Depends upon gdb_string.h.
-	(infptrace.o): Depends upon wait_h and command_h.
-	(maint.o): Depends on objfiles.h and symfile.h.
-	* values.c (allocate_repeat_value): Remove unused variable
-	"element_type".
-	(scm-lang.h): Include.
-	* breakpoint.c (create_longjmp_breakpoint): Enclose in
-	GET_LONGJMP_TARGET define, unused otherwise.
-	* config/i386/nm-linux.h: Add prototypes for i386_insert_watchpoint,
-	i386_remove_watchpoint and i386_stopped_by_watchpoint.
-	
-Thu Mar 28 12:53:19 1996  Doug Evans  <dje@canuck.cygnus.com>
-
-	* configure.in (sparc64-*-solaris2*): Delete.
-	Stick with sparc-*-solaris2*.
-	* configure: Regenerated.
-
-Thu Mar 28 06:51:26 1996  Fred Fish  <fnf@cygnus.com>
-
-	* valops.c (value_assign): Make copy of internal variable value
-	before returning it as a new value, since it is owned by the 
-	internal variable and will be freed along with it.
-
-Wed Mar 27 08:36:17 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* From Peter Schauer.
-	* breakpoint.c (breakpoint_re_set_one):  Keep temporary
-	breakpoints bp_until, bp_finish, bp_watchpoint_cope, bp_call_dummy
-	and bp_step_resume in case breakpoint_re_set_one is called due
-	to a step over a dlopen call.
-	* infrun.c (wait_for_inferior):  Always remove breakpoints from
-	inferior in BPSTAT_WHAT_CHECK_SHLIBS case.
-
-Tue Mar 26 13:15:32 1996  Fred Fish  <fnf@cygnus.com>
-
-	* config/mips/tm-mips.h (COERCE_FLOAT_TO_DOUBLE): Only prefer
-	non-prototyped case over prototyped case for C.
-	* config/pa/tm-hppa.h (COERCE_FLOAT_TO_DOUBLE):  Ditto.
-
-Sat Mar 23 17:24:28 1996  Fred Fish  <fnf@cygnus.com>
-
-	* os9kread.c (os9k_process_one_symbol): Note nonportable
-	assumption that an int can hold a char *.
-
-	* bcache.h (struct hashlink): Wrap data[] inside union with
-	double to force longest alignment.
-	(BCACHE_DATA): New macro to access data[].
-	(BCACHE_ALIGNMENT): New macro to get offset to data[].
-	* bcache.c (lookup_cache, bcache): Use BCACHE_DATA to get
- 	address of cached data.  Use BCACHE_ALIGNMENT to compute
-	amount of space to allocate for each hashlink struct.
-
-Sat Mar 23 12:14:02 1996  Fred Fish  <fnf@cygnus.com>
-
-	* ch-lang.c (evaluate_subexp_chill): Fix typo.
-
-Thu Mar 21 08:27:19 1996  Fred Fish  <fnf@cygnus.com>
-
-	* Makefile.in (VERSION): Bump version to 4.15.3
-
-Thu Mar 21 10:56:41 1996  Ian Lance Taylor  <ian@cygnus.com>
-
-	* config.in: Rename from config.h.in.
-	* configure.in: Call AC_CONFIG_HEADER with config.h:config.in.
-	Change CONFIG_HEADERS test in AC_OUTPUT accordingly.
-	* configure: Rebuild.
-	* Makefile.in (stamp-h): Depend upon config.in, not config.h.in.
-	Set CONFIG_HEADERS to config.h:config.in.
-
-Tue Mar 19 12:47:51 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
-
-	* partial-stab.h (case N_ENDM):  Finish current partial symbol
-	table for Solaris 2 cc.
-
-Tue Mar 19 10:39:15 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* rs6000-nat.c (exec_one_dummy_insn): Don't clobber the
-	PC in the registers array.  From Peter Schauer.
-
-Mon Mar 18 13:47:09 1996  Fred Fish  <fnf@cygnus.com>
-
-	* symfile.c (reread_symbols): Reinitialize bcache struct
-	members to zero using memset.  Also use memset to reinit
-	global_psymbols and static_psymbols, rather than explicitly
-	resetting each structure member.
-
-Sat Mar 16 19:47:36 1996  Fred Fish  <fnf@cygnus.com>
-
-	* configure.in: Add fragment to create stamp-h.
-	
-	From Peter Schauer <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE>
-	* configure.in (AC_CHECK_HEADERS):  Check for link.h.
-	* configure:  Regenerate with autoconf.
-	* config.h.in:  Regenerate with autoheader.
-	* config/i386/nm-linux.h:  Include solib.h only if HAVE_LINK_H
-	is defined.
-	* solib.c:  Exclude most of the code if HAVE_LINK_H is not defined.
-	* config/i386/linux.mh:  Reinstate XM_CLIBS, it is needed for
-	older a.out based systems.
-
-Sat Mar 16 16:45:43 1996  Fred Fish  <fnf@cygnus.com>
-
-	* config.h.in: New file.
-	* acconfig.h: New file, for autoheader.
-	* configure.in (AC_CONFIG_HEADER): Add, generate config.h.
-	* configure: Regenerate.
-	* Makefile.in (defs_h): Add config.h
-	(distclean): Remove config.h and stamp-h during distclean.
-	(config.h, stamp-h): New targets to remake config.h when necessary.
-	* defs.h (config.h): Include before any other includes or defines.
-	* i386-tdep.c (gdb_string.h): Move include after include of defs.h.
-	* i386v4-nat.c (defs.h): Include before testing HAVE_SYS_PROCFS_H.
-
-Sat Mar 16 14:55:27 1996  Fred Fish  <fnf@cygnus.com>
-
-	From Peter Schauer <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE>
-	* Makefile.in (INSTALLED_LIBS):  Make sure that @LIBS@ will not
-	result in an empty line, to work around a bug in native Ultrix 4.4
-	and OSF/1-3.2C make.
-
-Sat Mar 16 13:33:17 1996  Fred Fish  <fnf@cygnus.com>
-
-	* configure.in: Add gdbserver to configdirs under linux.
-	* configure: Regenerate.
-	
-Fri Mar 15 12:06:58 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* config/i386/nm-nbsd.h (FLOAT_INFO): Comment out.
-	* config/i386/tm-nbsd.h (NUM_REGS): Define.
-
-Thu Mar 14 10:31:18 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* solib.c (solib_break_names): Add _r_debug_state for
-	vanilla SVR4 implementations.  From Peter Schauer.
-
-Mon Mar 11 14:24:57 1996  Dawn Perchik  <dawn@critters.cygnus.com>
-
-	* mon960-rom.c: New file; support mon960 rom monitor on i960.
-	* monitor.c (monitor_debug): Change remotedebug to buffer strings.
-	* monitor.c (monitor_open): Add test for flag MO_NO_ECHO_ON_OPEN before
-	epecting prompt and echo during open.
-	* monitor.c (monitor_stop): Add test for flag MO_SEND_BREAK_ON_OPEN to 
-	determine if break should be sent as stop command.
-	* monitor.h: Add flags MO_NO_ECHO_ON_OPEN and MO_SEND_BREAK_ON_OPEN.
-	* i960-tdep.c (mon960_frame_chain_valid): New function for getting 
-	stack frame on mon960.
-	* Makefile.in: Add mon960 files.
-	* configure.in: Changed i960-*-coff* and i960-*-elf* to target mon960;
- 	added i960-nindy-coff* and i960-nindy-elf* for target nindy.
-	* configure: Regenerated.
-	* config/i960/mon960.mt, config/i960/tm-mon960.h: New files; 
-	support mon960 rom monitor on i960.
-
-Mon Mar 11 11:02:47 1996  Steve Chamberlain  <sac@slash.cygnus.com>
-
-	With Michael Snyder:
-	* i386-tdep.c (skip_trampoline_code): Fix strncmp length.
-	* win32-nat.c (CHECK, DEBUG*, debug_*): New.
-	(handle_load_dll): Don't reload symbols.
-	(handle_exception):  Use the DEBUG_* names.
-	(child_wait): Add DEBUG_* code.
-	(_initialize_inftarg): Add new commands to set debug_ names.
-
-Mon Mar 11 09:19:58 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* From Peter Schauer:
-	* breakpoint.c (insert_breakpoints): Use ALL_BREAKPOINTS_SAFE.
-	(bpstat_stop_status): Likewise.
-	(remove_solib_event_breakpoints): Likewise.
-	(clear_momentary_breakpoints): Likewise.
-	(re_enable_breakpoints_in_shlibs): Don't reenable a breakpoint
-	if we still can't read the memory for that breakpoint.
-	(mention): Add bp_shlib_event case to keep gcc quiet.
-	
-Fri Mar  8 12:08:12 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* breakpoint.h (enum enable): New enum shlib_disabled for
-	shared library breakpoints that have been temporarily disabled.
-	* breakpoint.c: Handle temporarily disabled shared library
-	breakpoints like disabled breakpoints in most places.
-	(insert_breakpoints): Use shlib_disabled to indicate
-	that an unsettable breakpoint is only temporarily disabled.
-	(re_enable_breakpoints_in_shlibs): New function.
-	* corelow.c (solib_add_stub): After adding shared libraries,
-	try to reenable any temporarily disabled breakpoints.
-	* infcmd.c (attach_command): Likewise.
-	* infrun.c (wait_for_inferior): Likewise.
-
-Fri Mar  8 11:41:25 1996  Ian Lance Taylor  <ian@cygnus.com>
-
-	* defs.h (extract_long_unsigned_integer): Declare.
-	* findvar.c (extract_long_unsigned_integer): New function.
-	* printcmd.c (print_scalar_formatted): Use it.
-	* valprint.c (val_print_type_code_int): Likewise.
-
-Thu Mar  7 17:40:50 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* infcmd.c (do_registers_info): Ignore anonymous registers.
-	* sh-tdep.c (set processor): New command to set specific
-	processor type.
-	(sh_reg_names, sh3_reg_names): Arrays of register names for
-	SH and SH3 processors.
-	(sh_set_processor_type): New function.
-	* sh3-rom.c (sh3_open): Call it.
-	(sh3_regname): Add names of all the bank registers.
-	(sh3_supply_register): Clean up formatting.
-	* config/sh/tm-sh.h (NUM_REGS, NUM_REALREGS): Increase to include
- 	bank registers.
-	(REGISTER_NAMES): Add names of bank registers.
-	(FP15_REGNUM): Define.
-	(REGISTER_VIRTUAL_TYPE): Use it.
-	* monitor.c: Clean up some comments.
-
-Thu Mar  7 12:09:51 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* i386b-nat.c: Revert part of Mar 5 change.  FreeBSD collapsed the
- 	s* and t* symbols too.
-
-Thu Mar  7 15:18:51 1996  James G. Smith  <jsmith@cygnus.co.uk>
-
-	* symfile.c (generic_load): Avoid division by zero.
-
-Wed Mar  6 17:57:59 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* breakpoint.c (bfd_lookup_symbol): Provide for all SVR4 systems,
-	not just those with HANDLE_SVR4_EXEC_EMULATORS.
-
-	From Peter Schauer:
-	* breakpoint.c (internal_breakpoint_number): Move to file scope.
-	(create_solib_event_breakpoint): Use an internal breakpoint number.
-
-Wed Mar  6 00:32:44 1996  Wilfried Moser  <moser@rtl.cygnus.com>
-
-	* valarith.c (value_in): Change builtin_type_chill_bool to
-	LA_BOOL_TYPE.
-
-Tue Mar  5 23:48:36 1996  Wilfried Moser  <moser@rtl.cygnus.com>
-
-	* ch-exp.c (parse_primval): Handle CARD, MAX, MIN.
-	(match_string_literal): Handle control sequence.
-	(match_character_literal): Deto.
-
-	* ch-lang.c (chill_printchar): Change formating of nonprintable
-	characters from C'xx' to ^(num).
-	(chill_printstr): Deto.
-	(value_chill_card, value_chill_max_min): New functions to process
-	Chill's CARD, MAX, MIN.
-	(evaluate_subexp_chill): Process UNOP_CARD, UNOP_CHMAX, UNOP_CHMIN.
-
-	* expression.h (exp_opcode): Add UNOP_CARD, UNOP_CHMAX, UNOP_CHMIN
-	for Chill's CARD, MAX, MIN.
-
-	* valarith.c (value_in): Add processing of TYPE_CODE_RANGE
-	and change return type from builtin_type_int to
-	builtin_type_chill_bool.
-
-Tue Mar  5 18:54:04 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* config/nm-nbsd.h (link_object, lo_name, etc): Move to here
- 	from config/nm-nbsd.h.
-	* config/sparc/nm-nbsd.h (regs, fp_status, etc): Move to here
-	from config/sparc/tm-nbsd.h.
-
-	* config/m68k/nm-hp300hpux.h (FIVE_ARG_PTRACE): Define here
-	instead of in config/m68k/xm-hp300hpux.h.
-
-Tue Mar  5 12:05:35 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* i386b-nat.c, m68knbsd-nat.c (fetch_core_registers): Provide
- 	implementation for NetBSD systems.
-
-Mon Mar  4 23:44:16 1996  Per Bothner  <bothner@kalessin.cygnus.com>
-
-	* valarith.c (binop_user_defined_p):  Return 0 for BINOP_CONCAT.
-	(value_concat):  Handle varying strings (add COERCE_VARYING_ARRAY).
-
-	* ch-lang.c (evaluate_subexp_chill case MULTI_SUBSCRIPT):  Error
-	if "function" is pointer to non-function.
-
-Mon Mar  4 17:47:03 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* top.c (print_gdb_version): Update copyright year.
-
-Mon Mar  4 14:44:54 1996  Jeffrey A Law  (law@cygnus.com)
-
-	From Peter Schauer:
-	* infrun.c (wait_for_inferior): Remove breakpoints and
-	switch terminal settings before calling SOLIB_ADD.
-	* solib.c (enable_break, SVR4 variant): Don't map in symbols
-	for the dynamic linker, the namespace pollution causes real
-	problems.
-
-Sun Mar  3 17:18:57 1996  James G. Smith  <jsmith@cygnus.co.uk>
-
-	* remote-mips.c (common_breakpoint): Explicitly terminate the
- 	returned buffer.
-
-Wed Feb 28 22:32:18 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	From Wilfried Moser <wilfried.moser@aut.alcatel.at>:
-	* remote.c (remote_detach): Send a command 'D' to the target
-	when detaching, update the function's comments.
-
-Thu Jun  6 16:11:38 1996  Miles Bader  <miles@gnu.ai.mit.edu>
-
-	* gnu-nat.c (thread_cmd_list): New declaration.
-	(parse_int_arg): New function.
-
-Wed Jun  5 17:28:04 1996  Miles Bader  <miles@gnu.ai.mit.edu>
-
-	* gnu-nat.h (struct proc): Add DETACH_SC field.
-	* gnu-nat.c (make_proc): Set DETACH_SC.
-	(struct inf): Add DETACH_SC & DEFAULT_THREAD_DETACH_SC fields.
-	(make_inf): Set DETACH_SC & DEFAULT_THREAD_DETACH_SC fields.
-	(add_thread_commands): Add set/show for detach-suspend-count.
-	Add takeover-suspend-count cmd.
-	(inf_detach): Set suspend counts to the detach SC, not 0.
-	(set_thread_detach_sc_cmd, show_thread_detach_sc_cmd,
-	set_task_detach_sc_cmd, show_task_detach_sc_cmd,
-	set_thread_default_thread_detach_sc_cmd,
-	show_thread_default_thread_detach_sc_cmd): New functions.
-	(show_task_cmd): Also show detach-suspend-count values.
-	(thread_takeover_sc_cmd): New function.
-
-Fri May 31 16:49:24 1996  Miles Bader  <miles@gnu.ai.mit.edu>
-
-	* gnu-nat.c (show_thread_run_cmd): Actually print state.
-
-Thu May 30 10:47:56 1996  Miles Bader  <miles@gnu.ai.mit.edu>
-
-	* gnu-nat.c (inf_signal): Make unforwardable exceptions an error.
-
-Tue May 28 17:06:36 1996  Miles Bader  <miles@gnu.ai.mit.edu>
-
-	* gnu-nat.c (inf_validate_stopped): proc_getprocinfo takes a
-	pointer to the flags now, not the flags themselves.
-
-Mon May 27 13:31:17 1996  Miles Bader  <miles@gnu.ai.mit.edu>
-
-	* gnu-nat.c (gnu_wait): Print debugging msgs for pending execs.
-	(gnu_create_inferior): Check return from ptrace.
-
-Sun May 26 16:56:35 1996  Miles Bader  <miles@gnu.ai.mit.edu>
-
-	* gnu-nat.h (struct proc): Add DEAD field.
-	* gnu-nat.c (make_proc): Initialize DEAD.
-	(inf_set_traced, inf_validate_task_sc, inf_validate_procs: Frob it.
-	(gnu_wait): Only abort for 0 threads if the task isn't dead.
-
-Sat May 25 17:06:05 1996  Miles Bader  <miles@gnu.ai.mit.edu>
-
-	* gnu-nat.c (inf_signal): Pass SIGCODE when posting a signal.
-
-Wed May 22 18:44:28 1996  Miles Bader  <miles@gnu.ai.mit.edu>
-
-	* gnu-nat.c (S_proc_wait_reply): Add SIGCODE argument.
-	(inf_set_traced): Only give no-signal-thread error message if
-	turning *on* tracing.
-
-Wed May 15 13:03:16 1996  Miles Bader  <miles@gnu.ai.mit.edu>
-
-	* gnu-nat.c (inf_validate_procs): If INF has no threads, always
-	set inf->threads_up_to_date to 0.
-	(inf_signal): Pass in new SIGCODE argument to msg_sig_post_untraced.
-	(gnu_wait): Pass in new TIMEOUT arg to interrupt_operation.
-	(proc_update_sc): Cast thread state arg to thread_set_state.
-	(proc_get_state): Cast thread state arg to thread_get_state.
-	(inf_validate_task_sc): Cast task_basic_info arg to task_info.
-	* i386gnu-nat.c (gnu_fetch_registers, gnu_store_registers): Call
-	inf_update_procs before we lookup the thread.
-	* config/i386/i386gnu.mh (MH_CFLAGS): New variable.
-
-Tue May  7 17:52:33 1996  Miles Bader  <miles@gnu.ai.mit.edu>
-
-	* gnu-nat.c (gnu_kill_inferior): Use inf_set_task to clear the task.
-
-Mon May  6 19:06:49 1996  Miles Bader  <miles@gnu.ai.mit.edu>
-
-	* gnu-nat.c (inf_set_traced): Use msg_set_init_int with
-	INIT_TRACEMASK instead of setting the exec flags.
-
-Fri May  3 19:10:57 1996  Miles Bader  <miles@gnu.ai.mit.edu>
-
-	* gnu-nat.c (inf_validate_procs): Don't clear INF->task if we find
-	the task's died, so others have a chance at it.
-	(gnu_resume): When single-stepping a single thread, given an error
-	if there is no such thread.  When single-stepping one but running
-	the others, just given a warning and still run all the threads.
-	(gnu_wait): If there seem to be no threads, look harder, and
-	signal an error if there really aren't any.
-	(gnu_attach): Reset thread numbering to 0.
-
-	* i386gnu-nat.c (gnu_fetch_registers, gnu_store_registers): Give
-	thread name in warning messages.
-
-	* gnu-nat.c (active_inf): New function.
-	(show_sig_thread_cmd, show_stopped_cmd): Use it.
-	(info_port_rights, info_send_rights_cmd, info_port_sets_cmd,
-	info_recv_rights_cmd, info_port_rights_cmd, info_port_rights_cmd):
-	New functions.
-	(add_task_commands): Add new port-right info commands.
-
-Fri Apr 26 20:42:16 1996  Miles Bader  <miles@gnu.ai.mit.edu>
-
-	* gnu-nat.c (gnu_wait): Instead of _hurd_intr_rpc_mach_msg, just
-	use mach_msg with MACH_RCV_INTERRUPT.
-	(set_noninvasive_cmd): New function.
-	(add_task_commands): Add command entry for `set noninvasive'.
-
-Mon Mar  4 14:12:02 1996  Miles Bader  <miles@gnu.ai.mit.edu>
-
-	* gnu-nat.c (gnu_read_inferior): Use hurd_safe_memmove, not safe_bcopy.
-	(safe_bcopy): Function removed.
-
-Mon Dec  4 14:18:26 1995  Miles Bader  <miles@gnu.ai.mit.edu>
-
-	* gnu-nat.c (proc_update_sc): Assert only threads can have state.
-	(make_proc): Initialize state_valid & state_changed fields.
-
-Tue Nov 28 17:51:21 1995  Miles Bader  <miles@gnu.ai.mit.edu>
-
-	* reply_mig_hack.awk: New file.
-
-Tue Nov 14 14:31:03 1995  Miles Bader  <miles@gnu.ai.mit.edu>
-
-	* breakpoint.c (breakpoint_1): Print breakpoint thread field.
-
-	* lynx-nat.c (child_wait): Return TARGET_WAITKIND_SPURIOUS for new
-	threads.
-
-Mon Nov 13 18:30:53 1995  Miles Bader  <miles@gnu.ai.mit.edu>
-
-	* target.c (debug_to_check_threads): New function.
-
-	* inflow.c (terminal_init_inferior_with_pgrp): New function.
-	(terminal_init_inferior): Call terminal_init_inferior_with_pgrp.
-	* inferior.h (terminal_init_inferior_with_pgrp): New declaration,
-	but only if PROCESS_GROUP_TYPE is defined.
-
-Mon Nov  6 16:42:09 1995  Miles Bader  <miles@gnu.ai.mit.edu>
-
-	* target.c (debug_to_thread_alive): Pass through the return value.
-
-Thu Nov  2 18:05:00 1995  Miles Bader  <miles@gnu.ai.mit.edu>
-
-	* target.c (signals, target_signal_from_host, target_signal_to_host): 
-	Add mach exceptions.
-	* target.h (enum target_signal): Add mach exceptions.
-
-Mon Oct 30 16:41:04 1995  Miles Bader  <miles@gnu.ai.mit.edu>
-
-	* gnu-nat.c: New file: gnu native backend.
-	* i386gnu-nat.c: New file: i386-specific part of gnu native backend.
-	* gnu-nat.h: New file.
-	* config/nm-gnu.h: New file.
-	* config/tm-i386gnu.h: New file.
-	* config/xm-i386gnu.h: New file.
-	* config/i386/i386gnu.mh: New file.
-	* config/i386/i386gnu.mt: New file.
-
-Wed Feb 28 15:50:12 1996  Fred Fish  <fnf@cygnus.com>
-
-	* Makefile.in (VERSION): Bump version to 4.15.2 to establish
-	baseline for gdb 4.16 rerelease testing.
-
-Wed Feb 28 13:32:05 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* somsolib.c (som_solib_create_inferior_hook): Before returning
-	call clear_symtab_users.
-
-Tue Feb 27 00:04:46 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* remote-e7000.c (e7000_open):  Delete all breakpoints when
-	connecting to e7000.  Change connect message to allow use of
-	monitor.exp in test suite.
-	* (e7000_load):  Print transfer rate of download.
-	* symfile.c (generic_load):  Print transfer rate of download.
-
-Sun Feb 25 13:58:33 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* configure.in (mips*-*-vxworks*): New config.
-	* configure: Regenerated.
-
-	* config/mips/vxmips.mt, config/mips/tm-vxmips.h: New files.
-	* remote-vxmips.c (vx_convert_to_virtual, vx_convert_from_virtual):
-	Remove, never used.
-
-Sat Feb 24 12:30:28 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
-
-	* partial-stab.h (case N_FUN):  Function symbols generated
-	by SPARCworks cc have a meaningless zero value, do not update
-	pst->textlow if the function symbol value is zero. 
-
-	* stabsread.c (define_symbol):  Initialize SYMBOL_TYPE field
-	for function prototype declaration symbols.
-
-Fri Feb 23 22:33:04 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* remote-e7000.c (e7000_load):  New routine to download via the
-	network.
-	* (e7000_wait):  Don't backup PC when we hit a breakpoint.
-	Apparantly new sh2 pods get this right...
-	* (e7000_ops):  Add call to e7000_load.
-
-Thu Feb 22 00:52:42 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* config/m68k/{nbsd.mh,nbsd.mt,nm-nbsd.h,tm-nbsd.h,xm-nbsd.h},
-	m68knbsd-nat.c: New files, support for NetBSD/m68k.
-
-	* configure.in (m68k-*-netbsd*): New config.
-	* configure: Regenerated.
-
-Wed Feb 21 19:00:21 1996  Fred Fish  <fnf@cygnus.com>
-
-	* standalone.c (open, _initialize_standalone): Fix obvious typos
-	reported by Martin Pool <martin@citr.uq.oz.au>.
-
-Wed Feb 21 14:24:04 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* solib.c (solib_create_inferior_hook): Fix thinko.
-
-Tue Feb 20 23:59:19 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* solib.c (solib_break_names): Define for Solaris and Linux.
-	(enable_break): For SVR4 systems, first try to use the debugger
-	interfaces in the dynamic linker to track shared library events
-	as they happen, then fall back to BKPT_AT_SYMBOL code.  Convert
-	BKPT_AT_SYMBOL code to use shared library event breakpoints.
-	(solib_create_inferior_hook): Simplify BKPT_AT_SYMBOL code,
-	it no longer needs to restart/wait on the inferior.
-	* symfile.c (find_lowest_section): No longer static.
-	* symfile.h (find_lowest_section): Corresponding changes.
-
-Tue Feb 20 18:54:08 1996  Fred Fish  <fnf@cygnus.com>
-
-	* valops.c (COERCE_FLOAT_TO_DOUBLE): Define default value.
-	(value_arg_coerce): Use COERCE_FLOAT_TO_DOUBLE.
-	* config/alpha/tm-alpha.h (COERCE_FLOAT_TO_DOUBLE): Define to 1.
-	* config/mips/tm-mips.h: Ditto.
-	* config/pa/tm-hppa.h: Ditto.
-	* config/rs6000/tm-rs6000.h: Ditto.
-	* config/sparc/tm-sparc.h: Ditto.
-	
-Tue Feb 20 17:32:05 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* config/{i386,ns32k}/nbsd.mh (NATDEPFILES): Remove core-aout.o.
-
-	* config/nm-nbsd.h (FETCH_INFERIOR_REGISTERS): Defined.
-	* config/xm-nbsd.h (CC_HAS_LONG_LONG, PRINTF_HAS_LONG_LONG):
-	#ifdef'd out definitions ---  Causes serious gdb failures on 
-	the i386.  Need to investigate further before enabling.
-
-	* i386b-nat.c (fetch_inferior_registers, store_inferior_registers,
-	fetch_core_registers): New functions.  These functions are defined
-	if FETCH_INFERIOR_REGISTERS is set.  Registers are fetched/stored
-	with ptrace PT_GETREGS/PT_SETREGS.
-
-Tue Feb 20 16:55:06 1996  Stu Grossman  (grossman@critters.cygnus.com)
-
-	* findvar.c (extract_floating store_floating):  Replace `long
-	double' with `DOUBLEST'.
-
-Mon Feb 19 15:25:51 1996  J.T. Conklin  <jtc@rtl.cygnus.com>
-
-	* config/xm-nbsd.h (CC_HAS_LONG_LONG, PRINTF_HAS_LONG_LONG):
- 	Define.
-
-Mon Feb 19 10:32:05 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* symtab.h (looup_minimal_symbol_solib_trampoline): Declare.
-
-	* breakpoint.h (remove_solib_event_breakpoints): Declare.
-	* breakpoint.c (remove_solib_event_breakpoints): New function.
-	* somsolib.c (solib_create_inferior_hook): Remove all solib event
-	breakpoints before inserting any new ones.  Use a solib event
-	breakpoint for the breakpoint at "_start".
-	Remove extraneous "\n" from calls to warning.  
-	
-	* breakpoint.c (breakpoint_1): Add missing "sigtramp" to bptypes
-	name array.
-	
-Mon Feb 19 01:09:32 1996  Doug Evans  <dje@cygnus.com>
-
-	* dwarfread.c (add_partial_symbol): Use ADD_PSYMBOL_ADDR_TO_LIST
-	for CORE_ADDR values.
-	(new_symbol): Use SYMBOL_VALUE_ADDRESS for CORE_ADDR values.
-	* symfile.h (add_psymbol_{,addr}to_list): Add prototypes.
-
-Sun Feb 18 14:37:13 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
-
-	* mipsread.c (mipscoff_symfile_read):  Unconditionally add
-	alpha coff dynamic symbols for all symbol files.  Makes skipping
-	over the trampoline code work when stepping from a function in a
-	shared library into a function in a different shared library.
-
-Sun Feb 18 09:27:10 1996  Stu Grossman  (grossman@cygnus.com)
-
-	* config/sparc/tm-sparc.h:  Define PS_FLAG_CARRY.  Define
-	RETURN_VALUE_ON_STACK to return long doubles on the stack.
-
-Sat Feb 17 16:33:11 1996  Fred Fish  <fnf@cygnus.com>
-
-	* Makefile.in (ch-exp.o): Add dependencies.
-	(various): Add gdb_string.h to dependencies that need it.
-
-Sat Feb 17 08:57:50 1996  Fred Fish  <fnf@cygnus.com>
-
-	* symmisc.c (print_symbol_bcache_statistics): Update description for
-	printing byte cache statistics.
-
-Thu Feb 16 16:02:03 1996  Stu Grossman  (grossman@cygnus.com)
-
-	* Add native support for long double data type.
-	* c-exp.y (%union):  Change dval to typed_val_float.  Use DOUBLEST
-	to store actual data.  Change types of INT and FLOAT tokens to
-	typed_val_int and typed_val_float respectively.  Create new token
-	DOUBLE_KEYWORD to specify the string `double'.  Make production
-	for FLOAT use type determined by parse_number.  Add production for
-	"long double" data type.
-	* (parse_number):  Use sscanf to parse numbers as float, double or
-	long double depending upon the type of typed_val_float.dval.  Also
-	allow user to specify `f' or `l' suffix to explicitly specify
-	float or long double constants.  Change typed_val to
-	typed_val_int.
-	* (yylex):  Change typed_val to typed_val_int.  Also, scan for
-	"double" keyword.
-	* coffread.c (decode_base_type):  Add support for T_LNGDBL basic
-	type.
-	* configure, configure.in:  Add check for long double support in
-	the host compiler.
-	* defs.h:  Define DOUBLEST appropriatly depending on whether
-	HAVE_LONG_DOUBLE (from autoconf) is defined.  Also, fix prototypes
-	for functions that handle this type.
-	* expression.h (union exp_element):  doubleconst is now type
-	DOUBLEST.
-	* m2-exp.y f-exp.y (%union):  dval becomes type DOUBLEST.
-	* findvar.c (extract_floating):  Make return value be DOUBLEST.
-	Also, add support for numbers with size of long double.
-	* (store_floating):  Arg `val' is now type DOUBLEST.  Handle all
-	floating types.
-	* parser-defs.h parse.c (write_exp_elt_dblcst):  Arg expelt is now
-	DOUBLEST.
-	* valarith.c (value_binop):  Change temp variables v1, v2 and v to
-	type DOUBLEST.  Coerce type of result to long double if either op
-	was of that type.
-	* valops.c (value_arg_coerce):  If argument type is bigger than
-	double, coerce to long double.
-	* (call_function_by_hand):  If REG_STRUCT_HAS_ADDR is defined, and
-	arg type is float and > 8 bytes, then use pointer-to-object
-	calling conventions.
-	* valprint.c (print_floating):  Arg doub is now type DOUBLEST.
-	Use appropriate format and precision to print out floating point
-	values.
-	* value.h:  Fixup prototypes for value_as_double,
-	value_from_double, and unpack_double to use DOUBLEST.
-	* values.c (record_latest_value):  Remove check for invalid
-	floats.  Allow history to store them so that people may examine
-	them in hex if they want.
-	* (value_as_double unpack_double):  Change return value to DOUBLEST.
-	* (value_from_double):  Arg `num' is now DOUBLEST.
-	* (using_struct_return):  Use RETURN_VALUE_ON_STACK macro (target
-	specific) to expect certain types to always be returned on the stack.
-
-Fri Feb 16 14:00:54 1996  Fred Fish  <fnf@cygnus.com>
-
-	* bcache.c, bcache.h: New files to implement a byte cache.
-	* Makefile.in (SFILES): Add bcache.c.
-	(symtab_h): Add bcache.h.
-	(HFILES_NO_SRCDIR): add bcache.h
-	(COMMON_OBJS): Add bcache.o
-	(bcache.o): New target.
-	* dbxread.c (start_psymtab): Make global_syms & static_syms
- 	type "partial_symbol **".
-	* hpread.c (hpread_start_symtab):  Ditto.
-	* os9kread.c (os9k_start_psymtab):  Ditto.
-	* stabsread.h (start_psymtab):  Ditto.
-	* {symfile.c, symfile.h} (start_psymtab_common):  Ditto.
-	* maint.c (maintenance_print_statistics): Call
- 	print_symbol_bcache_statistics.
-	* objfiles.c (allocate_objfile): Initialize psymbol bcache malloc
-	and free pointers.
-	* solib.c (allocate_rt_common_objfile): Ditto.
-	* symfile.c (reread_symbols):  Ditto.
-	(free_objfile): Free psymbol bcache when objfile is freed.	
-	(objfile_relocate): Use new indirect psymbol pointers.
-	* objfiles.h (struct objfile): Add psymbol cache.
-	* symfile.c (compare_psymbols): Now passed pointers to pointers to
-	psymbols.
-	(reread_symbols): Free psymbol bcache when freeing other objfile
-	resources.
-	(add_psymbol_to_list, add_psymbol_addr_to_list): Initialize new
-	psymbol using the psymbol bcache.
-	(init_psymbol_list): Psymbol lists now contain pointers rather than
-	the actual psymbols.
-	* symfile.h (psymbol_allocation_list): Psymbol lists now dynamically
-	grown arrays of pointers.
-	(ADD_PSYMBOL_VT_TO_LIST): Initialize new symbol using the psymbol
-	bcache.
-	* symmisc.c (print_partial_symbols): Now takes pointer to pointer
-	to partial symbol.
-	(print_symbol_bcache_statistics): New function to print per objfile
- 	bcache statistics.
-	(print_partial_symbol, print_partial_symbols,
- 	maintenance_check_symtabs, extend_psymbol_list):
- 	Account for change to pointer to pointer to partial symbol.
-	* symtab.c (find_pc_psymbol, lookup_partial_symbol, decode_line_2,
-	make_symbol_completion_list): 
- 	Account for change to pointer to pointer to partial symbol.
-	* symtab.h (bcache.h): Include.
-	* xcoffread.c (xcoff_start_psymtab): Make global_syms & static_syms
- 	type "partial_symbol **".
-
-Fri Feb 16 10:02:34 1996  Fred Fish  <fnf@cygnus.com>
-
-	* dwarfread.c (free_utypes): New function.
-	(read_file_scope): Call free_utypes as cleanup,	rather than just
- 	freeing the utypes pointer.
-
-Thu Feb 15 21:40:52 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
-
-	* demangle.c (is_cplus_marker):  New function, checks if a
-	character is one of the commonly used C++ marker characters.
-	* defs.h (is_cplus_marker):  Add prototype.
-	* c-typeprint.c (c_type_print_base), ch-lang.c (chill_demangle),
-	cp-valprint.c (cp_print_class_method), mdebugread.c (parse_symbol),
-	stabsread.c (define_symbol, read_member_functions, read_struct_fields),
-	symtab.h (OPNAME_PREFIX_P, VTBL_PREFIX_P, DESTRUCTOR_PREFIX_P),
-	values.c (vb_match):  Use is_cplus_marker instead of comparison
-	with CPLUS_MARKER.
-
-Thu Feb 15 18:08:13 1996  Fred Fish  <fnf@cygnus.com>
-
-	* symfile.h (INLINE_ADD_PSYMBOL): Default this to 0 and possibly
-	delete entirely someday.
-
-Thu Feb 15 15:25:34 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* mpw-make.sed: Edit out makefile rebuild rule.
-	(host_alias, target_alias): Comment out instead of deleting.
-	(@LIBS@): Edit out references.
-
-Tue Feb 13 22:56:46 1996  Fred Fish  <fnf@cygnus.com>
-
-	* symfile.c (add_psymbol_to_list, add_psymbol_addr_to_list):
- 	Use n_psyms in OBJSTAT, not psyms.
-
-Mon Feb 12 15:59:31 1996  Doug Evans  <dje@charmed.cygnus.com>
-
-	* configure.in (sparclet-*-aout*): New config.
-	* configure: Regenerated.
-
-Mon Feb 12 14:17:52 1996  Fred Fish  <fnf@cygnus.com>
-
-	* somsolib.c (som_solib_add): Use xmalloc rather than bare
-	unchecked call to malloc.
-	* remote-mips.c (pmon_load_fast): ditto.
-	* remote-mm.c (mm_open): ditto.
-	* hpread.c (hpread_lookup_type): ditto.
-	* remote-adapt.c (adapt_open): ditto.
-
-Mon Feb 12 13:11:32 1996  Fred Fish  <fnf@cygnus.com>
-
-	* f-lang.c (allocate_saved_bf_node, allocate_saved_function_node,
-	allocate_saved_f77_common_node, allocate_common_entry_node,
-	add_common_block): Use xmalloc rather than malloc, some of which
-	were unchecked.
-	* gnu-regex.c: At same point as other gdb specific changes
-	#undef malloc and then #define it to xmalloc.
-	* ch-exp.c (growbuf_by_size): Use xmalloc/xrealloc rather than
-	bare unchecked calls to malloc/realloc.
-	* stabsread.c (dbx_lookup_type): Use xmalloc rather than bare
- 	unchecked call to malloc.
-
-Wed Feb  7 11:31:26 1996  Stu Grossman  (grossman@cygnus.com)
-
-	* symtab.c (gdb_mangle_name):  Change opname var to be const to
-	match return val of cplus_mangle_name.
-	* i960-tdep.c:  Change arg types of next_insn to match callers.
-
-Wed Feb  7 07:34:24 1996  Fred Fish  <fnf@cygnus.com>
-
-	* config/i386/linux.mh (XM_CLIBS, GDBSERVER_LIBS):  Remove.  These
-	apparently aren't needed in any reasonably recent version of
-	linux.
-
-Tue Feb  6 21:37:03 1996  Per Bothner  <bothner@kalessin.cygnus.com>
-
-	* stabsread.c (read_range_type):  If !self-subrange and language
-	is Chill, assume a true range.  If a true_range is a sub_subrange,
-	use builtin_type_int for index_type.
-
-Tue Feb  6 18:38:51 1996  J.T. Conklin  <jtc@slave.cygnus.com>
-
-	* nindy-share/nindy.c (say): Use stdarg.h macros when compiling
-        with an ANSI compiler.
-
-Mon Feb  5 18:24:28 1996  Steve Chamberlain  <sac@slash.cygnus.com>
-
-	From Michael_Snyder@NeXT.COM (Michael Snyder):
-	* valops.c (value_arg_coerce): Coerce float to double, unless the
- 	function prototype specifies float.
-	
-Mon Feb  5 09:51:55 1996  Tom Tromey  <tromey@creche.cygnus.com>
-
-	* language.c (set_language_command): Use languages table when
-	printing available languages.
-
-Sat Feb  3 12:22:05 1996  Fred Fish  <fnf@cygnus.com>
-
-	Fix problems reported by Hans Verkuil (hans@wyst.hobby.nl):
-	* command.c (add_cmd):  Add missing initialization for enums member.
-	Reorder members to match structure declaration to make it easier to
-	tell when one is missing.
-	* exec.c (exec_file_command): Fix problem where filename in malloc'd
- 	memory is referenced after being freed.
-
-Sat Feb  3 03:26:21 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
-
-	* dwarfread.c (read_func_scope):  Avoid GDB core dumps if
-	AT_name tag is missing.
-
-	* procfs.c (procfs_stopped_by_watchpoint):  Fix logic when
-	FLTWATCH and FLTKWATCH are defined.
-
-	* remote.c (remote_read_bytes):  Advance memaddr for transfers,
-	return number of bytes transferred for partial reads.
-
-	* top.c (init_signals):  Reset SIGTRAP to SIG_DFL.
-
-Fri Feb  2 13:40:50 1996  Steve Chamberlain  <sac@slash.cygnus.com>
-
-	* win32-nat.c (mappings): Add ppc registers.
-	(child_resume): Turn off step for ppc.
-
-Thu Feb  1 10:29:31 1996  Steve Chamberlain  <sac@slash.cygnus.com>
-
-	* config/powerpc/(cygwin32.mh, cygwin32.mt, tm-cygwin32.h,
-	xm-cygwin32.h): New.
-	* config/i386/(*win32*): Becomes *cygwin32*.
-	* configure.in (i[3456]86-*-win32*): Becomes i[3456]86-*-cygwin32.
-	(powerpcle-*-cygwin32): New.
-	* configure: Regenerate.
-	* win32-nat.c  (child_create_inferior): Call CreateProcess
-	with the right program arg.
-
-Thu Feb  1 11:01:10 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* config/pa/tm-hppa.h (SOFT_FLOAT): Provide a default definition.
-
-Wed Jan 31 19:01:28 1996  Fred Fish  <fnf@cygnus.com>
-
-	* serial.c: Change fputc/fputs/fprintf to _unfiltered forms.
-
-Wed Jan 31 18:36:27 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* config/sparc/xm-sun4os4.h (HAVE_TERMIOS): Remove.
-
-	* config/sparc/xm-sparc.h (HAVE_WAIT_STRUCT): Remove, never used.
-
-	* config/i386/nm-i386mach.h (CHILD_PREPARE_TO_STORE): Move to
-	here from config/i386/xm-i386mach.h, fix name.
-	* config/i386/nm-sun386.h: Ditto, from config/i386/xm-sun386.h.
-	* config/i386/nm-ptx4.h (CHILD_PREPARE_TO_STORE): Move to
-	here from config/i386/xm-ptx4.h.
-	* config/i386/nm-ptx4.h: Ditto,	from config/i386/xm-ptx.h.
-	* config/i386/nm-symmetry.h: Ditto, from config/i386/xm-symmetry.h.
-	* config/m68k/nm-sun3.h: Ditto, from config/m68k/xm-sun3.h.
-	* config/sparc/nm-nbsd.h: Ditto, from config/sparc/xm-nbsd.h.
-	* config/sparc/nm-sun4os4: Ditto, from config/sparc/xm-sparc.h.
-
-	* config/sparc/nm-sun4sol2.h: New file, renamed from nm-sysv4.h.
-	(PRSVADDR_BROKEN): Move here from xm-sun4sol2.h.
-	* config/sparc/sun4sol2.mh (NAT_FILE): Update.
-
-Wed Jan 31 17:20:26 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* config/pa/tm-hppa.h (EXTRACT_RETURN_VALUE): Handle software
-	floating point correctly.
-	(STORE_RETURN_VALUE): Likewise.
-	* config/pa/tm-pro.h (SOFT_FLOAT): define.
-
-Wed Jan 31 13:34:52 1996  Fred Fish  <fnf@cygnus.com>
-
-	* config/i386/xm-linux.h (MMAP_BASE_ADDRESS, MMAP_INCREMENT): 
-	Define to what should be reasonable values.  However, apparently
-	a bug in linux mmap prevents mapped symbol tables from working.
-
-Tue Jan 30 18:26:19 1996  Fred Fish  <fnf@cygnus.com>
-
-	* defs.h (errno.h>:  Move #include closer to head of file to solve
-	obscure problem with systems that declare perror with const arg, in
- 	both errno.h and stdio.h, and const is defined away by intervening
- 	local include.
-
-Tue Jan 30 15:41:10 1996  Fred Fish  <fnf@cygnus.com>
-
-	From Jon Reeves <reeves@zk3.dec.com>:
-	* i386-stub.c (getpacket): Change fprintf stream from "gdb" to stderr.
-	(mem_fault_routine): Fix misplaced volatile type qualifier in decl.
-
-Mon Jan 29 19:05:58 1996  Fred Fish  <fnf@cygnus.com>
-
-	* Makefile.in (diststuff): Make all-doc; diststuff target does not
-	exist in doc/Makefile.in.
-
-Mon Jan 29 18:44:57 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* config/m88k/xm-cxux.h (BP_HIT_COUNT): Remove, never used.
-
-Mon Jan 29 00:10:35 1996  Wilfried Moser  <moser@rtl.cygnus.com>
-
-	* ch-valprint.c (calculate_array_length): New function to
- 	determine the length of an array type.
-	(chill_val_print (case TYPE_CODE_ARRAY)): If the length of an
-	array type is zero, call calculate_array_length.
-
-	* gdbtypes.c (get_discrete_bounds (case TYPE_CODE_ENUM)): The
- 	values may not be sorted. Scan all entries and set the real lower
- 	and upper bound.
-
-Sun Jan 28 15:50:42 1996  Fred Fish  <fnf@cygnus.com>
-
-	* config/xm-linux.h: Move include of solib.h and #define of
-	SVR4_SHARED_LIBS from here ...
-	* config/nm-linux.h: ...to here.
-
-Sat Jan 27 10:34:05 1996  Fred Fish  <fnf@cygnus.com>
-
-	* configure.in (AC_CHECK_HEADERS): Check for sys/procfs.h.
-	Also check for gregset_t and fpregset_t types.
-	* configure: Regenerate.
-	* core-regset.c (sys/procfs.h): Only include if HAVE_SYS_PROCFS_H
- 	is defined.
-	(fetch_core_registers): Turn into stub unless both HAVE_GREGSET_T
- 	and HAVE_FPREGSET_T are defined.  These changes allow systems
- 	like linux that are migrating to /proc support to use a single
- 	configuration for both new and old versions.
-
-	* config/i386/linux.mt: Note that this is now for both a.out and
-	ELF systems.
-	* config/i386/linux.mh (NATDEPFILES): Add solib.o, core-regset.o,
-	i386v4-nat.o
-	* config/i386/tm-linux.h (tm-sysv4.h): Include.
-	* config/i386/xm-linux.h (solib.h): Include
-	(SVR4_SHARED_LIBS): Define.
-	* i386v4-nat.c: Only compile if HAVE_SYS_PROCFS_H is defined.
-	(supply_gregset, fill_gregset): Compile if HAVE_GREGSET_T defined.
-	(supply_fpregset, fill_fpregset): Compile if HAVE_FPREGSET_T
- 	defined.
-
-Fri Jan 26 13:48:14 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* config/sparc/xm-sparc.h (NEW_SUN_CORE): Remove, never used.
-	* config/i386/xm-sun386.h: Ditto.
-	* config/m68k/xm-sun2.h, config/m68k/xm-sun3.h: Ditto.
-
-Thu Jan 25 16:05:53 1996  Tom Tromey  <tromey@creche.cygnus.com>
-
-	* Makefile.in (INSTALLED_LIBS, CLIBS): Include @LIBS@.
-
-Thu Jan 25 09:22:15 1996  Steve Chamberlain  <sac@slash.cygnus.com>
-
-	From Greg McGary  <gkm@gnu.ai.mit.edu>:
-	* dcache.c (dcache_peek, dcache_poke): Advance addr for
-	multi-byte I/O.
-
-Thu Jan 25 13:08:51 1996  Doug Evans (dje@cygnus.com)
-
-	* infrun.c (normal_stop): Fix test for shared library event.
-
-Thu Jan 25 03:26:38 1996  Doug Evans  <dje@charmed.cygnus.com>
-
-	* configure.in (sparc64-*-*): Add default host configuration.
-	(sparc64-*-solaris2*): Add target configuration.
-	(sparc64-*-solaris2* host): Link statically if GCC used.
-	* configure: Regenerated.
-	* sparc/sp64sol2.mt: New file.
-
-Wed Jan 24 22:31:37 1996  Doug Evans  <dje@charmed.cygnus.com>
-
-	* Makefile.in (RUNTEST): srcdir renamed to rootsrc.
-
-Wed Jan 24 15:42:24 1996  Tom Tromey  <tromey@creche.cygnus.com>
-
-	* Makefile.in (lint): Close backquotes.
-
-Wed Jan 24 13:19:10 1996  Fred Fish  <fnf@cygnus.com>
-
-	* NEWS: Make note of new record and replay feature for
-	remote debug sessions.
-	* serial.c (gdbcmd.h): Include.
-	(serial_logfile, serial_logfp, serial_reading, serial_writing):
- 	Define here, for remote debug session logging.
-	(serial_log_command, serial_logchar, serial_write, serial_readchar):
-	New functions for remote debug session logging.
-	(serial_open): Open remote debug session log file when needed.
-	(serial_close): Close remote debug session log file when needed.
-	(_initialize_serial): Add set/show commands for name of remote
-	debug session log file.
-	* serial.h (serial_readchar): Declare
-	(SERIAL_READCHAR): Call serial_readchar().
-	(SERIAL_WRITE): Call serial_write().
-	(serial_close): Declare as extern.
-	(serial_logfile, serial_logfp): Declare.
-	* top.c (execute_command): Declare serial_logfp.  Log user command
-	in remote debug session log if log file is open.
-	* remote-array.c (array_wait): #ifdef out echo to gdb_stdout.
-	(array_read_inferior_memory): Rewrite to fix memory overwrite bug.
-	* remote-array.c (SREC_SIZE): Remove, duplicates define in
-	monitor.h.
-	* remote-array.c (hexchars, hex2mem):  Remove, unused.
-	* gdbserver/low-linux.c (store_inferior_registers): Remove
-	unnecessary extern declaration of registers[].
-	* gdbserver/Makefile.in (all): Add gdbreplay.
-	* gdbserver/gdbreplay.c: New file.
-	* gdbserver/README: Give example of recording a remote
-	debug session with gdb and then replaying it with gdbreplay.
-	
-Tue Jan 23 18:02:35 1996  Per Bothner  <bothner@kalessin.cygnus.com>
-
-	* stabsread.c (rs6000_builtin_type):  Make bool type unsigned.
-	(read_one_struct_field):  Support boolean bitfields.
-	* c-valprint.c (c_val_print): Print booleans properly.
-
-Tue Jan 23 18:54:09 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* remote-vxsparc.c (vx_convert_to_virtual, vx_convert_from_virtual):
-	Remove, never used.
-	* config/sparc/vxsparc.mt (TDEPFILES): Add remote-vxsparc.o.
-
-Tue Jan 23 14:36:05 1996  Per Bothner  <bothner@kalessin.cygnus.com>
-
-	* ch-exp.c (parse_tuple):  Error if invalid mode.
-
-	* value.h (COERCE_ARRAY):  Don't coerce enums.
-	(COERCE_ENUM):  Don't COERCE_REF.
-	(COERCE_NUMBER):  New macro (same as COERCE_ARRAY then COERCE_ENUM).
-	* valops.c (value_assign):  Only do COERCE_ARRAY if internalvar (let
- 	value_cast handle it otherwise); do *not* COERCE_ENUM either way.
-	* valarith.c:  Use COERCE_NUMBER instead od COEREC_ARRAY.
-	Add COERCE_REF before COERCE_ENUM.
-	* values.c (value_as_long):  Simplify.
-
-	* valops.c (value_array):  Create internalvar if !c_style_arrays.
-
-	* language.c (lang_bool_type):  Add Fortran support.
-	* eval.c (OP_BOOL):  Use LA_BOOL_TYPE.
-
-Tue Jan 23 13:08:26 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* symfile.c (auto_solib_add): Renamed from auto_solib_add_at_startup.
-	All references changed.
-	* breakpoint.c (bpstat_what): Add shlib_event to the class types.
-	Update state table.  Reformat so that it's still readable.
-	When we hit the shlib_event breakpoint, set the calss of shlib_event.
-	(breakpoint_1): Add "shlib events" as a breakpoint type.
-	Print the shlib_event breakpoint like other breakpoints.
-	(create_solib_event_breakpoint): New function.
-	(breakpoint_re_set_one): Handle solib_event breakpoints.
-	* breakpoint.h (enum bytype): Add bp_shlib_event breakpoint type.
-	(enum bpstat_what_main_action): Add BPSTAT_WHAT_CHECK_SHLIBS
-	action.
-	(create_solib_event_breakpoint): Declare.
-	* infrun.c (wait_for_inferior): Handle CHECK_SHLIBS bpstat.
-	(normal_stop): Inform the user when the inferior stoped due
-	to a shared library event.
-	(_initialize_infrun): Add new set/show variable "stop-on-solib-events"
-	to control whether or not gdb continues the inferior or stops it when
-	a shared library event occurs.
-	* minsyms.c (lookup_minimal_symbol_solib_trampoline): New function.
-	* somsolib.c (TODO list): Update.
-	(som_solib_create_inferior_hook): Arrange for gdb to be notified
-	when significant shared library events occur.
-	* hppa-tdep.c (find_unwind_entry): No longer static.
-
-Tue Jan 23 09:00:48 1996  Doug Evans  <dje@charmed.cygnus.com>
-
-	* printcmd.c (print_insn): Pass fprintf_unfiltered to
- 	INIT_DISASSEMBLE_INFO.
-
-Mon Jan 22 16:59:40 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* remote.c (remotebreak): New GDB variable.
-	(remote_break): New global.
-	(remote_interrupt): Send a break instead of ^C if remote_break.
-	* NEWS: Describe the new variable.
-
-Mon Jan 22 16:24:11 1996  Doug Evans  <dje@charmed.cygnus.com>
-
-	* sparc-tdep.c (_initialize_sparc_tdep): Always use print_insn_sparc.
-
-Fri Jan 19 07:19:38 1996  Fred Fish  <fnf@cygnus.com>
-
-	* hp300ux-nat.c (getpagesize): Remove unused function
- 	fetch_core_registers.
-	(hp300ux_core_fns):  Remove, is unused.
-	(_initialize_core_hp300ux):  Remove, is unused.
-	(gdbcore.h):  Remove #include, no longer needed.
-	
-Fri Jan 19 00:59:53 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* rs6000-nat.c (exec_one_dummy_insn): Rework to avoid
-	ptrace bug in aix4.1.3 on the rs6000.
-
-Wed Jan 17 13:22:27 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* remote-hms.c (hms_ops): Add value for to_thread_alive.
-	* remote-nindy.c (nindy_ops): Ditto.
-	* remote-udi.c (udi_ops): Ditto.
-
-Tue Jan 16 18:00:35 1996  James G. Smith  <jsmith@cygnus.co.uk>
-
-	* remote-mips.c (pmon_opn, pmon_wait, pmon_makeb64, pmon_zeroset,
- 	pmon_checkset, pmon_make_fastrec, pmon_check_ack,
-	pmon_load_fast): New functions. Support for the PMON monitor world.
-	(common_open): New function to merge support for different monitors.
-	(mips_open): Use common_open().
-	(mips_send_command): New function.
-	(mips_send_packet): Scan out-of-sequence packets.
-	(mips_enter_debug, mips_exit_debug): New functions.
-	(pmon_ops): New target definition structure.
-	
-Tue Jan 16 11:22:58 1996  Stu Grossman  (grossman@cygnus.com)
-
-	* Makefile.in (CLIBS):  Add LIBS to allow libraries to be
-	specified on the make command line (via make LIBS=xxx).
-
-
-Fri Jan 12 21:41:58 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* symtab.c (find_pc_symtab): Don't lose if OBJF_REORDERED
-	is set but there are no psymtabs.
-
-Fri Jan 12 15:56:12 1996  Steve Chamberlain  <sac@slash.cygnus.com>
-
-	* dsrec.c (load_srec): Remove unused variable.
-	* monitor.c (monitor_expect): Don't expect a ^C to echo.
-	* serial.c (serial_open): Add parallel interface.
-	* sh3-rom.c (parallel, parallel_in_use): New.
-	(sh3_load): If parallel_in_use, download though the
-	parallel port.
-	(sh3_open): Open parallel port if specified.
-	(sh3_close): New function.
-	(_inititalize_sh3): Add sh3_close hook and documentation.
-	* monitor.c (monitor_close): Export.
-	* monitor.h (monitor_close): Add prototype.
-
-Fri Jan 12 13:11:42 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	From Wilfried Moser <wilfried.moser@aut.alcatel.at>:
-	* remote.c (remotetimeout): New GDB variable, use to set the
-	remote timeout for reading.
-
-Fri Jan 12 07:14:27 1996  Fred Fish  <fnf@cygnus.com>
-
-	* lynx-nat.c, irix4-nat.c, sparc-nat.c: Include gdbcore.h
-	to get "struct core_fns" defined.
-	* Makefile.in (lynx-nat.o, irix4-nat.o, sparc-nat.o):
- 	Are dependent upon gdbcore_h.
-
-Thu Jan 11 23:13:24 1996  Per Bothner  <bothner@cygnus.com>
-
-	* symfile.c (decrement_reading_symtab):  New function.
-	* symfile.c, symtab.h (currently_reading_symtab):  New variable.
-	* symfile.c (psymtab_to_symtab):  Adjust currently_reading_symtab.
-	* gdbtypes.c (check_typedef):  Don't call lookup_symbol if
-	currently_reading_symtab (since that could infinitely recurse).
-
-Thu Jan 11 17:21:25 1996  Per Bothner  <bothner@kalessin.cygnus.com>
-
-	* stabsread.c (read_struct_type):  Trivial simplification.
-
-	* stabsread.c (define-symbol):  Use invisible references
-	for TYPE_CODE_SET and TYPE_CODE_BITSTRING too.
-	* valops.c (call_function_by_hand):  Likewise.
-	* eval.c (evaluate_subexp_standard):  When known, use the formal
-	parameter type as the expected type when evaluating arg expressions.
-	* ch-lang.c (evaluate_subexp_chill):  Likewise (for MULTI_SUBSCRIPT).
-
-Thu Jan 11 10:08:14 1996  Tom Tromey  <tromey@creche.cygnus.com>
-
-	* main.c (main): Disable window interface if --help or --version
-	specified.
-
-Wed Jan 10 16:08:49 1996  Brendan Kehoe  <brendan@lisa.cygnus.com>
-
-	* configure.in, configure: Recognize rs6000-*-aix4*.
-	* config/powerpc/xm-aix.h: Reduce to include "xm-aix4.h".
-	* config/rs6000/aix4.mh (XM_FILE): Point to xm-aix4.h.
-	* config/rs6000/xm-aix4.h: New file.
-	* config/xm-aix4.h: New file.
-
-Wed Jan 10 11:25:37 1996  Fred Fish  <fnf@cygnus.com>
-
-	From Wilfried Moser <wilfried.moser@aut.alcatel.at>:
-	* gdbserver/low-linux.c: New file.
-	* remote.c (remote_read_bytes): Fix aborts on larger packets.
-
-	* config/i386/linux.mh (GDBSERVER_DEPFILES, GDBSERVER_LIBS):
-	Define.
-	* stabsread.c (define_symbol): If register value is too large,
-	tell what it is and what max is.
-
-Tue Jan  9 09:33:53 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* hpread.c (hpread_build_psymtabs): Finish Jan 4th 
-	enum namespace -> enum_namespace change.
-
-Tue Jan  9 04:44:47 1996  Wilfried Moser  <moser@rtl.cygnus.com>
-
-	* ch-exp.c (parse_primval): In case ARRAY, add missing
-	FORWARD_TOKEN ().
-
-Mon Jan  8 13:29:34 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* remote-mips.c (mips_receive_header): Recognize \012 instead
-	of \n, but write \n when program sends a \012.
-	* ser-mac.c (mac_input_buffer): Increase size of buffer.
-
-Mon Jan  8 12:00:40 1996  Jeffrey A Law  (law@cygnus.com)
-
-	* infptrace.c (initialize_infptrace): Move function out of
-	#ifdef conditional; put code within the function inside an
-	#ifdef conditional.
-
-	* buildsym.c (end_symtab): Remove sort_pending and sort_linevec
-	arguments.  Sorting is now dependent on OBJF_REORDERED.  All
-	callers/references changed.
-	* dbxread.c (read_ofile_symtab): Correctly determine value for
-	last_source_start_addr for reordered executables.
-	(process_one_symbol): Handle N_FUN with no name as an end of
-	function marker.
-	* partial-stab.h (case N_FN, N_TEXT): Don't assume CUR_SYMBOL_VALUE
-	is the high text address for a psymtab.
-	(case N_SO): Likewise.
-	(case N_FUN): Handle N_FUN with no name as an end of function
-	marker.
-	* minsyms.c (lookup_minimal_symbol_by_pc): Examine all symbols
-	at the same address rather than a random subset of them.
-	* coffread.c (coff_symfile_init): Set OBJF_REORDERED.
-	* elfread.c (elf_symfile_init): Similarly.
-	* somread.c (som_symfile_init): Similarly.
-	* xcoffread.c (xcoff_symfile_init): Similarly.
-
-Fri Jan  5 17:46:01 1996  Stu Grossman  (grossman@cygnus.com)
-
-	* stack.c (print_stack_frame print_frame_info) symmisc.c
-	(dump_symtab):  Change RETURN_MASK_ERROR to RETURN_MASK_ALL so
-	that catch_errors doesn't get blindsided by QUIT and lose the
-	cleanup chain.  This fixes a problem where ^C while in a
-	user-defined command sometimes leaves instream NULL and causes a
-	segfault in command_loop.
-
-Fri Jan  5 13:59:16 1996  Brendan Kehoe  <brendan@lisa.cygnus.com>
-
-	* configure.in, configure: Add `-ldl -lw' for Solaris linking.
-
-Fri Jan  5 12:02:00 1996  Steve Chamberlain  <sac@slash.cygnus.com>
-
-	* config/sh/sh.mt, config/powerpc/*.mt, config/pa/hppapro.mt,
-	config/m68k/monitor.mt, config/h8500/h8500.mt, config/h8300/h8300.mt:
-	srec.o renamed to dsrec.o.
-
-Thu Jan  4 16:04:54 1996  Stu Grossman  (grossman@cygnus.com)
-
-	* breakpoint.c (remove_breakpoint):  Change error to warning so
-	that hardware watchpoint removal problems won't leave breakpoint
-	traps in the target.
-	* remote-e7000.c (e7000_insert_breakpoint,
-	e7000_remove_breakpoint):  Use e7000 based breakpoints, not memory
-	breakpoints.
-	* (e7000_wait):  Adjust PC back by two when we see a breakpoint to
-	compensate for e7000 maladjustment.
-	* sparcl-tdep.c (sparclite_check_watch_resources):  Fix logic bug
-	which prevented hardware watchpoints from working.
-
-Thu Jan  4 10:44:17 1996  Fred Fish  <fnf@cygnus.com>
-
-	* infptrace.c (udot_info): New function.
-	(PT_*): Define each individually if that one is not defined.
-	* rs6000-nat.c (kernel_u_size): New function
-	Include <sys/user.h> for "struct user"
-	* alpha-nat.c (kernel_u_size): New function.
-	Include <sys/user.h> for "struct user"
-	* sparc-nat.c (kernel_u_size): New function.
-	Include <sys/user.h> for "struct user"
-	* i386b-nat.c (kernel_u_size): New function.
-	* i386v-nat.c (kernel_u_size): New function.
-	* config/i386/nm-fbsd.h (KERNEL_U_SIZE): Define.
-	(kernel_u_size): Declare.
-	* config/i386/nm-linux.h (KERNEL_U_SIZE): Define.
-	(kernel_u_size): Declare.
-	* config/sparc/nm-sun4os4.h (KERNEL_U_SIZE): Define.
-	(kernel_u_size): Declare.
-	* config/alpha/nm-osf2.h (KERNEL_U_SIZE): Define.
-	(kernel_u_size): Declare.
-	* config/rs6000/nm-rs6000.h (KERNEL_U_SIZE): Define.
-	(kernel_u_size): Declare.
-
-Thu Jan  4 11:00:01 1996  steve chamberlain  <sac@slash.cygnus.com>
-
-	* mdebugread.c (mylookup_symbol): enum namespace becomes
-	enum_namespace 	type.
-	* symfile.c (add_psymbol_to_list)
-	(add_psymbol_addr_to_list): Ditto.
-	* symtab.c (lookup_partial_symbol): Ditto.
-	(lookup_symbol): Ditto.
-	(lookup_block_symbol): Ditto.	
-	* win32-nat.c (handle_load_dll): Use incoming dll base.
-	(child_wait): Catch DLL load errors.
-	(create_child_inferior): Translated between paths correctly.
-
-Wed Jan  3 23:13:53 1996  Fred Fish  <fnf@cygnus.com>
-
-	* i386v4-nat.c (supply_gregset, fill_gregset): Subtract NUM_FREGS
- 	from NUM_REGS to get number of general registers that we care about.
-	* config/i386/tm-i386.h (REGISTER_BYTES): Define in terms
-	of number of general regs and number of floating point regs.
-
-Wed Jan  3 19:49:54 1996  steve chamberlain  <sac@slash.cygnus.com>
-
-	* config/i386/tm-win32.h (IN_SOLIB_CALL_TRAMPOLINE): New.
-	(SKIP_TRAMPOLINE_CODE): New.
-	* config/i386/xm-win32.h (CANT_FORK): Deleted.
-	(SLASH*) Changed to use unix style slash.
-	* symtab.h (namespace enum): becomes typedef to avoid namespace
-	collision in C++. 
-	* infcmd.c (path_command): Use empty string if PATH name not set.
-	* i386-tdep.c (skip_trampoline_code): New function.
-	* srec.c: Renamed dsrec.c to avoid filename collision.
-	* Makefile.in: Cope with renaming.
-	
-Wed Jan  3 13:09:04 1996  Fred Fish  <fnf@cygnus.com>
-
-	* symmisc.c (print_objfile_statistics): Print memory use statistics
-	for objfile psymbol, symbol, and type obstacks.
-
-Tue Jan  2 13:41:14 1996  Stan Shebs  <shebs@andros.cygnus.com>
-
-	* config/mips/nm-irix5.h: Restore.
-	(TARGET_HAS_HARDWARE_WATCHPOINTS, etc): Define as for Irix 4;
-	from Lee Iverson <leei@ai.sri.com>.
-	* config/mips/irix5.mh (NAT_FILE): Use nm-irix5.h.
-	* config/mips/irix[345].mh (MUNCH_DEFINE): Remove.
-
-For older changes see ChangeLog-95
-
-Local Variables:
-mode: change-log
-left-margin: 8
-fill-column: 74
-version-control: never
-End: