Start this year's ChangeLog.

1 files changed, 5918 insertions, 0 deletions

diff --git a/gdb/ChangeLog-94 b/gdb/ChangeLog-94
new file mode 100644
index 0000000..10616f8
--- /dev/null
+++ b/gdb/ChangeLog-94
@@ -0,0 +1,5918 @@
+Fri Dec 30 17:58:55 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
+
+	* config/m68k/tm-est.h:  Remove cruft.
+
+start-sanitize-gdbtk
+Fri Dec 30 15:49:00 1994  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* gdbtk.tcl (FSBox): New proc, File Selection Box code from exmh.
+	(not_implemented_yet): New proc.
+	(build_framework): Add various file commands to file menu.
+end-sanitize-gdbtk
+
+Thu Dec 29 22:40:00 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* Allow up to 10 whitespace separated arguments to user defined
+	commands.
+	* top.c (struct user_args): Structure for holding arguments to
+	user defined commands.
+	(print_command_line): Delete unused "tmp_chain" variable.  Clean
+	up flow control by having cases exit in the same manner.
+	Before executing a command or evaluating an expression, substitute
+	the current $arg0..$arg9 values if the command/expression uses them.
+	(arg_cleanup): New function.
+	(setup_user_args, locate_arg, insert_args): Likewise.
+	(execute_user_command): Allow arguments to user defined commands.
+
+	* Allow if/while commands to be used within a breakpoint command
+	list.
+	* breakpoint.c (bpstat_do_actions): Call execute_control_command
+	rather than execute_command (passes entire command structure rather
+	than just the command line text).
+	(breakpoint_1): Use "print_command_line" to print a breakpoint
+	command line (including control structures).
+	* gdbcmd.h (execute_control_command): Provide extern decl.
+	(print_command_line): Likewise.
+	* top.c (execute_control_command): No longer static.
+	(print_command_line): New function to recursively print a command
+	line, including control structures.
+
+Thu Dec 29 18:18:31 1994  Rob Savoye  <rob@darkstar.cygnus.com>
+
+	* hppa-tdep.c (pa_print_registers): Extract register values stored
+	in big endian format on big and little endian hosts.
+
+	* array-rom.c: Support for Array Tech LSI33k based RAID disk
+	controller board.
+	* configure.in: Recognize "mips*-*-ecoff*" rather than
+	"mips*-idt-ecoff*" so it'll work for the LSI33k.
+
+	* monitor.[ch], op50-rom.c, rom68k-rom.c, w89k-rom.c: Add support
+	to monitor config structure for supported baud rates for a target
+	and variable stop bits.
+	* monitor.c (monitor_fetch_register): Store register values in big
+	endian format on any host.
+
+Wed Dec 28 19:27:22 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (hppa_fix_call_dummy): Prefer import stubs over
+	export stubs and actual shared library functions so that lazy
+	binding works correctly.  Try both __d_plt_call and __gcc_plt_call
+	trampolines for calling import stubs.
+
+Wed Dec 28 15:29:02 1994  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* a29k-tdep.c (pop_frame): Fix a variable name.
+
+Wed Dec 28 12:21:39 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (push_dummy_frame): Refine code to determine what
+	space ID to place in the stack & inf_status structure.
+	(hppa_pop_frame): Don't walk through trampoline code if popping a
+	call dummy frame.
+	(hppa_fix_call_dummy): Call the stack dummy directly if the
+	current PC is in a shared library.
+
+	* hppa-tdep.c (push_dummy_frame): Return type is void.  Clear
+	in_syscall bit in flags.  Don't depend on the PC queue registers
+	when in_syscall is set, they're not valid.
+	* config/pa/tm-hppa.h (PUSH_DUMMY_FRAME): Pass inf_status down to
+	push_dummy_frame.
+	(SR4_REGNUM): Define.
+
+	* hppa-tdep.c: Misc. lint changes.
+
+Tue Dec 27 12:32:43 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* breakpoint.c (watchpoint_check): Don't bother restoring the
+	"selected" frame anymore, it's not necessary.  Initialize the
+	frame cache before trying to find the current frame in the frame
+	chain.
+
+	* somsolib.c (som_solib_add): Return without loading any shared
+	libraries if symfile_objfile is NULL.
+	(som_solib_create_inferior_hook): Likewise.
+
+Fri Dec 23 17:03:13 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
+
+	* remote-est.c:  New file supports EST-300 CPU32 background 
+	mode ICE.
+	* remote-utils.c (sr_com):  Call registers_changed.
+	* configure.in (m68*-*-est*):  New configuration.
+	* config/m68k/tm-est.h:  New file.
+
+Fri Dec 23 16:18:50 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* Makefile.in (CLIBS):  Put LIBIBERTY last.
+start-sanitize-gdbtk
+	* gdbtk.c (gdbtk_wait gdbtk_init):  Portability improvements for
+	SIGIO handling.
+end-sanitize-gdbtk
+
+Thu Dec 22 09:27:16 1994  Jim Kingdon  <kingdon@deneb.cygnus.com>
+
+	* ser-tcp.c (tcp_open): Cast to struct sockaddr when passing to
+	function which expects that.
+
+Thu Dec 22 13:25:33 1994  J.T. Conklin  (jtc@rtl.cygnus.com)
+
+	* nlm/gdbserve.c, nlm/ppc.c, nlm/ppc.h: Don't try to use
+	  ALTERNATE_MEM_FUNCS.
+
+Wed Dec 21 14:00:26 1994  Rob Savoye  <rob@darkstar.cygnus.com>
+
+	* monitor.c: Now supports xmodem as a remoteloadprotocol.
+
+Tue Dec 20 23:01:17 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* config/mips/xm-irix4.h, config/mips/xm-irix5.h:  #define
+	_BSD_COMPAT to get reliable signal handling.
+
+Tue Dec 20 11:44:28 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* sparc-tdep.c, a29k-tdep.c, findvar.c (get_saved_register):
+	if !target_has_registers, call error().
+
+	* value.h: Remove obsolete comments about FRAME vs struct
+	frame_info *.
+
+start-sanitize-gdbtk
+Mon Dec 19 09:55:47 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* gdbtk.tcl (update_assembly):  Force update to make sure that pc
+	is visible when creating new assembly windows.
+
+Sun Dec 18 23:31:20 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* gdbtk.c (gdbtk_wait gdbtk_init):  Use different method of
+	enabling I/O interrupts for SVR4 (streams).
+	* (start_saving_output save_output get_saved_output
+	finish_saving_output flush_holdbuf gdbtk_flush gdbtk_fputs
+	gdbtk_init):
+	Totally revamp to use TCLs dynamic string functions.  Also, quote
+	all data passed back to TCL to prevent errors with unmatched
+	braces, odd characters, etc...  This fixes several wierd problems
+	with outputting strings containing unmatched braces.
+	* (breakpoint_notify gdb_loc):  Use long hex format to output
+	addresses of breakpoints and PCs.  This fixes some Alpha problems.
+	* (breakpoint_notify):  Add stream arg to call to gdbtk_fputs.
+	* (gdb_listfiles):  Also, go through the symtabs when looking for
+	files.  This makes xcoff work (sort of), but probably breaks
+	something else.
+	* (gdb_stop):  Return TCL_OK instead of nothing.  This fixes odd
+	TCL errors when hitting stop button.
+	* (tk_command):  Don't pass interp->result on to Tcl_{Var}Eval, as
+	that will trash the result.  strdup the result instead and pass
+	that on.  Improve error handling as well.
+
+	* gdbtk.tcl (gdbtk_tcl_flush):  Use global def of
+	current_output_win.  Makes flushing actually work!
+	* (asm_win_name create_asm_win update_assembly):  Bunch of fixes
+	to make assembly windows stop flashing when loading a new file.
+	* (gdbtk_tcl_busy gdbtk_tcl_idle):  Use catch to prevent gdb_cmd
+	errors from losing control.
+	* (create_source_window):  Add source file selection to View menu.
+	* (create_command_window (<Key-Return> binding):  Quote text fed
+	into gdb_cmd to prevent eval errors.
+end-sanitize-gdbtk
+
+Sun Dec 18 11:52:58 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* sparc-tdep.c (sparc_pop_frame):  Remove erroneous extra argument
+	to write_register.
+
+Sat Dec 17 13:23:21 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* tm-sparc.c (EXTRA_FRAME_INFO): New field sp_offset.
+	* sparc-tdep.c (sparc_init_extra_frame_info): Set it.
+	(examine_prologue, sparc_init_extra_frame_info): Use ->frame plus
+	->sp_offset to compute the address something is saved at, not
+	->bottom.
+
+	* sparc-tdep.c (get_saved_register): New function.
+	* tm-sparc.h: Define GET_SAVED_REGISTER; don't define
+	FRAME_FIND_SAVED_REGS, HAVE_REGISTER_WINDOWS or REGISTER_IN_WINDOW_P.
+	* stack.c (frame_info): Add comment about what to do if
+	FRAME_FIND_SAVED_REGS is not defined.
+
+	* sparc-tdep.c (sparc_init_extra_frame_info): Set ->frame field
+	here.  Get it right for flat frames.
+	* sparc-tdep.c (sparc_frame_chain): Instead of returning
+	meaningful value for ->frame field, just return dummy value.
+	This change is needed because the old code didn't deal with mixed
+	flat and non-flat frames.
+
+	* sparc-tdep.c (sparc_pop_frame): Write SP_REGNUM from
+	frame->frame, don't go through saved regs for this.
+
+	* sparc-tdep.c: Move guts of skip_prologue to new function
+	examine_prologue.  Check for flat prologue and set is_flat.
+	Provide the caller with the information about what is saved where
+	if desired.
+	(skip_prologue, sparc_frame_find_saved_regs): Call examine_prologue.
+
+	* sparc-tdep.c: Replace union sparc_insn_layout and anonymous
+	union in isannulled, which won't work on a little-endian host,
+	with X_* macros.
+
+	* sparc-tdep.c (sparc_frame_saved_pc): If addr == 0, the saved PC
+	is still in %o7.
+
+	* config/sparc/tm-sparc.h: Define INIT_FRAME_PC and
+	INIT_FRAME_PC_FIRST.
+	* blockframe.c (get_prev_frame_info): Modify comments regarding
+	INIT_FRAME_PC_FIRST and the sparc.
+
+	* sparc-tdep.c (single_step): Use 4 not sizeof (long) for size of
+	instruction. 
+
+Sat Dec 17 02:33:37 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* c-typeprint.c (c_type_print_base):  Use `show' of -1 to print
+	the return type of methods to avoid infinite loops with anonymous
+	types.
+	* valops.c (search_struct_field):  Handle anonymous unions.
+
+	* sparc-tdep.c (sunos4_skip_trampoline_code):  New function
+	to correctly handle steps into -g compiled PIC objects in the
+	main executable.
+	* config/sparc/tm-sun4os4.h (SKIP_TRAMPOLINE_CODE):
+	Redefine to use sunos4_skip_trampoline_code.
+
+	* dwarfread.c (DWARF_REG_TO_REGNUM):  Provide a default mapping
+	from DWARF to GDB register numbering.
+	* dwarfread.c (locval):  Use DWARF_REG_TO_REGNUM to map the
+	register value.
+	* config/mips/tm-mipsv4.h (DWARF_REG_TO_REGNUM):  Define.
+
+Fri Dec 16 10:56:29 1994  J.T. Conklin  <jtc@rtl.cygnus.com>
+
+	* Makefile.in (uninstall): transform file names.
+
+Thu Dec 15 16:55:35 1994  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* defs.h: Include progress.h.
+	(QUIT): Call PROGRESS.
+	* main.c (main): Call START_PROGRESS and END_PROGRESS, break
+	usage message into shorter strings.
+	* source.c:  Change long command help strings into concats of
+	shorter ones, for picky ANSI compilers.
+
+	* top.c (command_loop): For space usage display, show both
+        absolute size and the change from before command execution.
+
+Thu Dec 15 16:40:10 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* defs.h, main.c (gdb_fputs), top.c: Add stream arg to
+	fputs_unfiltered_hook.
+	* defs.h, top.c, utils.c (error): Add error_hook.
+start-sanitize-gdbtk
+	* gdbtk.c: Improve mechanism for capturing output values.
+	(full_filename): Remove.
+	(gdb_cmd call_wrapper gdbtk_init): Protect all calls from tcl land
+	with call_wrapper.  This prevents longjmps (usually via error())
+	from jumping out of tcl/tk and leaving things in an indeterminate
+	state.
+	(gdbtk_fputs): Differentiate stdout from stderr when passing text
+	into tcl land.
+	* gdbtk.tcl: New view option to disable line numbers.  Put catch
+	around most uses of gdb_cmd.  Add update button to reg config
+	window.  Stop doing immediate updates when selecting registers.
+	Change register view values into checkbuttons.
+end-sanitize-gdbtk
+
+Tue Dec 13 15:15:33 1994  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* breakpoint.c, infrun.c, printcmd.c: Change long command help
+        strings into concats of shorter ones, for picky ANSI compilers.
+
+Mon Dec 12 17:08:02 1994  Stan Shebs  <shebs@andros.cygnus.com>
+
+	Sparc flat register window support.
+	* sparc-tdep.c (sparc_insn_layout): New union, defines layout of
+        instructions symbolically (used to be local to skip_prologue).
+	(sparc_init_extra_frame_info): New function.
+	(sparc_frame_chain): Add flat cases throughout.
+	(skip_prologue): Add recognition of flat prologues.
+	(sparc_frame_find_saved_regs): Add flat cases.
+	(sparc_pop_frame): Ditto.
+	* config/sparc/tm-sparc.h (EXTRA_FRAME_INFO): New slots.
+	(INIT_EXTRA_FRAME_INFO): Call sparc_init_extra_frame_info.
+	(PRINT_EXTRA_FRAME_INFO): Define.
+
+start-sanitize-gdbtk
+Mon Dec 12 16:59:29 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* gdbtk.tcl (reg_config_menu create_registers_window
+	recompute_reg_display_list):  Use array instead of individual vars
+	for register display list.
+	* (recompute_reg_display_list update_registers):  Fix bug with not
+	displaying all registers.
+end-sanitize-gdbtk
+
+Mon Dec 12 13:06:59 1994  Jim Kingdon  <kingdon@deneb.cygnus.com>
+
+	* f-lang.c: Remove duplicate declaration of
+	builtin_type_f_integer, and only include it in the f_builtin_types
+	once.
+
+	* somread.c (som_symfile_read): Just assign to objfile->obj_private,
+	not OBJ_UNWIND_INFO.  Assigning to a cast is a GCC-ism which
+	the HP compiler doesn't like.
+
+start-sanitize-gdbtk
+Mon Dec 12 12:22:21 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* gdbtk.c:  New tcl commands:  gdb_fetch_registers,
+	gdb_changed_register_list, and gdb_regnames.
+	* gdbtk.tcl:  Use monochrome color model for now.
+	* (delete_breakpoint_tag create_file_win):  Add breakdot support.
+	* (create_file_win create_asm_win update_listing build_framework
+	create_source_window create_command_window):  Re-org window
+	creation to give all windows consistent look and feel.
+	* (update_listing update_asm):  Change pc pointer to '->'.
+	* (registers_command reg_config_menu create_registers_window
+	populate_reg_window update_registers):  Revamp register window.
+	Allow selection of registers to be displayed.  Highlight changed
+	registers.
+end-sanitize-gdbtk
+
+Fri Dec  9 15:50:05 1994  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* remote.c (remote_wait): Pass string instead of char to strcpy.
+
+Fri Dec  9 04:43:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdbserver/low-lynx.c (mywait): Remove debugging printf.
+
+Thu Dec  8 15:07:29 1994  Jim Kingdon  <kingdon@deneb.cygnus.com>
+
+	* frame.h: Restore pre-Nov 3 comments about FRAME_FP with minor
+	changes.  They are correct, unlike the post-Nov 3 comment
+	(FRAME_FP doesn't have any machine-independent relationship with
+	FP_REGNUM or any other such notion of a "frame pointer").
+
+Wed Dec  7 14:50:54 1994  Jim Kingdon  <kingdon@deneb.cygnus.com>
+
+	* gdbserver/remote-utils.c (write_ok): Write "OK", not "Ok", to
+	match stubs and protocol spec.
+	* gdbserver/remote-utils.c (remote_open): Cast to struct sockaddr
+	when passing to function which expects that.
+
+	The following changes aren't quite enough to make things work with
+	LynxOS (apprently kernel problems).
+	* infrun.c (wait_for_inferior): When resuming new thread, pass pid
+	not -1 for remote case.
+	* thread.c (info_threads_command): Give error if !target_has_stack. 
+	* infrun.c (start_remote): Call init_thread_list.
+	* thread.c (info_threads_command): Don't call kill for remote
+	debugging target.
+	* target.c (normal_pid_to_str): Print "thread" not "process" for
+	remote.
+	* remote.c, gdbserver/*: Add 'H', 'S', and 'C' requests, 'X'
+	response, and `thread' part of 'T' response.
+	* gdbserver/*: If program exits, send packet to GDB before
+	exiting.  Handle termination with a signal the same as exiting
+	with an exitstatus.
+	* remote.c: Don't try to kill program after getting an 'X'
+	response.
+	* infrun.c (wait_for_inferior): Add comment about kill versus mourn.
+
+Thu Dec  8 12:37:38 1994  Rob Savoye  <rob@darkstar.cygnus.com>
+
+	* config/pa/tm-pro.h tm-hppap.h, hppapro.mt: Rename tm-hppap.h to
+	tm-pro.h.
+
+Wed Dec  7 18:22:59 1994  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* source.c: Various cosmetic changes.
+	(forward_search_command): Handle very long source lines correctly.
+
+Wed Dec  7 13:21:47 1994  Rob Savoye  <rob@darkstar.cygnus.com>
+
+	* hppa-tdep.c: Use GDB_TARGET_IS_PA_ELF so SOM target support will
+	stop being linked in.
+
+	* config/pa/tm-hppap.h: New file. Set GDB_TARGET_IS_PA_ELF,
+	otherwise it looks like BSD-ELF.
+
+Mon Dec  5 21:43:52 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* inftarg.c: include <sys/types.h> to get def of pid_t.
+
+Fri Dec  2 15:03:07 1994  Stan Shebs  <shebs@andros.cygnus.com>
+
+	* solib.c (auto_solib_add_at_startup): New global.
+	(solib_create_inferior_hook): Call solib_add only if
+	auto_solib_add_at_startup is nonzero.
+	(_initialize_solib): New command "set auto-solib-add".
+
+Fri Dec  2 12:52:04 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* parse.c (msymbol_addr_type):  Replaced by
+	lookup_pointer_type (builtin_type_void).
+
+	* printcmd.c (_initialize_printcmd):  Give examine_*_type
+	a name for `ptype $_'.
+
+Fri Dec  2 12:52:04 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* printcmd.c (print_formatted): Call val_print_string directly,
+	rather than via value_print.
+
+Wed Nov 30 22:27:27 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* somsolib.c (som_solib_get_got_by_pc): New function.
+	* somsolib.h (som_solib_get_got_by_pc): Add extern decl.
+	* hppa-tdep.c (hppa_fix_call_dummy): Handle case where FUN is the
+	function's export stub or real address in a shared library.
+
+Tue Nov 29 13:40:25 1994  J.T. Conklin  (jtc@rtl.cygnus.com)
+
+	* config/i386/nbsd.mh (REGEX, REGEX1): No longer define.
+
+	* configure.in (i[345]86-*-freebsd*): New configuration.
+	* config/i386/{fbsd.mh,fbsd.mt,nm-fbsd.h}: New files.
+
+Tue Nov 29 12:23:25 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* top.c (read_next_line): Pass annotation suffix "commands"
+	instead of "command", matches documentation.
+
+Mon Nov 28 14:53:21 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* config/a29k/tm-a29k.h (setup_arbitrary_frame): Replace
+	FRAME_ADDR with CORE_ADDR in prototype.
+
+	* top.c (command_line_input): If annotation suffix is NULL,
+	replace it with an empty string.
+	(read_next_line): Pass "command" as annotation suffix to
+	command_line_input.
+
+Mon Nov 28 11:03:14 1994  J.T. Conklin  (jtc@rtl.cygnus.com)
+
+	* config/rs6000/tm-rs6000.h (setpgrp): move defn from here...
+	* config/rs6000/xm-rs6000.h: ...to here.
+
+start-sanitize-gdbtk
+Mon Nov 28 09:17:20 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* gdbtk.tcl (build_framework):  Fix bug with setting window titles.
+
+	* gdbtk.tcl (build_framework):  Add "Report bug" to help menu.
+
+	* gdbtk.tcl:  Re-arrange windows using new, consistent layout. Clean
+	up lots of code and centralize framework initialization.
+end-sanitize-gdbtk
+
+Fri Nov 25 21:26:02 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* tm-hppa.h (skip_trampoline_code): Add extern decl.
+	* hppa-tdep.c (hppa_pop_frame): Silently restart the inferior and
+	allow it to execute any return path trampoline code.  Stop the
+	inferior and give the user control when the trampoline has
+	finished executing.
+	(in_solib_call_trampoline): Handle export stubs which also perform
+	parameter relocations.
+	(in_solib_return_trampoline): Likewise.
+
+Fri Nov 25 13:37:10 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* coffread.c, symfile.h (coff_getfilename):  Make it static again.
+	* xcoffread.c (coff_getfilename):  Use a static copy from
+	coffread.c, modified for accessing the static xcoff strtbl.
+
+Fri Nov 25 00:51:05 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (in_solib_call_trampoline): Recognize calls through
+	_sr4export and $$dyncall as trampolines.  Likewise for long-call
+	stubs and parameter relocation stubs.
+	(in_solib_return_trampoline): Recognize a return trampoline for
+	return value relocation stubs.
+
+	* hpread.c: Include hp-symtab.h instead of hpux-symtab.h.
+	Various name changes to match those used by hp-symtab.h.
+
+Thu Nov 24 00:39:27 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* blockframe.c (find_pc_partial_function): Inhibit mst_trampoline
+	symbol special handling when INHIBIT_SUNSOLIB_TRANSFER_TABLE_HACK
+	is defined.
+	* infrun.c (IN_SOLIB_CALL_TRAMPOLINE): Renamed from
+	IN_SOLIB_TRAMPOLINE.  All callers changed.
+	(IN_SOLIB_RETURN_TRAMPOLINE): Provide default definition.
+	(wait_for_inferior): Handle single stepping through trampolines on
+	return paths from shared libraries.
+	* config/pa/tm-hppa.h (IN_SOLIB_CALL_TRAMPOLINE): Use
+	in_solib_call_trampoline.
+	(IN_SOLIB_RETURN_TRAMPOLINE): Use in_solib_return_trampoline.
+	(INHIBIT_SUNSOLIB_TRANSFER_TABLE_HACK): Define.
+	* hppa-tdep.c (in_solib_call_trampoline): New function.
+	(in_solib_return_trampoline): New function.	
+
+Wed Nov 23 21:43:03 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
+
+	* tm-h8300.h (REMOTE_BREAKPOINT): Define.
+	* h8300-tdep.c (h8300_pop_frame): Remove redundant call.
+
+	* remote-e7000.c (HARD_BREAKPOINTS): Reenable.
+	(BC_BREAKPOINTS): Disable.
+	* sh-tdep.c (print_insn): Cope with big and little endian machines.
+	* sh/sh.mt: Use libsim.a
+	* sh/tm-sh.h (TARGET_BYTE_ORDER_SELECTABLE): New
+	(BREAKPOINT): Changed to be byteorder independent.
+
+Tue Nov 22 19:13:39 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	Maintenance commands to report time and space usage.
+	* main.c (display_time, display_space): New globals.
+	(main): Add argument --statistics to enable reporting, display
+	time and space after startup is done.
+	* maint.c (maintenance_time_display, maintenance_space_display):
+	New commands.
+	* top.c (command_loop): Display time and space after command
+	execution.
+
+	* top.c (pre_init_ui_hook): New global.
+	(gdb_init): If pre_init_ui_hook set, call before all other init.
+
+Tue Nov 22 10:25:59 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* a29k-tdep.c (examine_tag): Fix a bug in stack frame size.
+
+Sat Nov 19 03:10:51 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* config/i386/i386sol2.mh:  Reenable core file support.
+
+	* symfile.c (deduce_language_from_filename):  Treat .c++ as a
+	C++ extension.
+
+	* valops.c (destructor_name_p):  Do not compare the template
+	part for template classes.
+
+Fri Nov 18 14:55:59 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* defs.h, infcmd.c (reg_names): Don't declare as constant.
+	* remote-mips.c (mips_open): Read and set the processor type.
+	* mips-tdep.c (mips_set_processor_type): Always return an int.
+
+Fri Nov 18 10:38:12 1994  J.T. Conklin  <jtc@rtl.cygnus.com>
+
+	* nlm/alpha.c (strtol): Remove, it is provided by NetWare C library.
+	* nlm/gdbserve.def (strtol): Add to import list.
+	* nlm/fake_aio.c: Remove file, no longer used.
+
+	* Makefile.in (LD_FOR_TARGET, NLMCONV_FOR_TARGET): Remove.
+	* nlm/Makefile.in (gdbserve.O): Link with ${CC_FOR_TARGET}.
+	(LD_FOR_TARGET): Remove.
+
+Thu Nov 17 22:09:50 1994  Rob Savoye  <rob@darkstar.cygnus.com>
+
+	* monitor.h, monitor.c, w89k-rom.c, op50n-rom.c, idp-rom.c: Add
+	support	for two variables used to control the load protocol and
+	conversion type.
+
+Thu Nov 17 17:51:12 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	Support for different MIPS IDT processor models.
+	* mips-tdep.c (mips_processor_type, tmp_mips_processor_type,
+	mips_generic_reg_names, mips_r3041_reg_names,
+	mips_r3051_reg_names, mips_r3081_reg_names,
+	mips_processor_type_table): New	globals.
+	(mips_do_registers_info): Don't display register if name is empty.
+	(mips_set_processor_type_command): New command.
+	(mips_show_processor_type_command): New command.
+	(mips_set_processor_type): New function.
+	(mips_read_processor_type): New function.
+	* config/mips/tm-idt.h (DEFAULT_MIPS_TYPE): New macro.
+	* config/mips/tm-mips.h (DEFAULT_MIPS_TYPE): New macro.
+	(NUM_REGS): Increase to account for all CP0 registers.
+	(REGISTER_NAMES): Add empty names for CP0 registers.
+	(FIRST_EMBED_REGNUM, LAST_EMBED_REGNUM): Adjust.
+	(PRID_REGNUM): New macro.
+
+Wed Nov 16 16:41:52 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* README: Add warning about termcap in Ultrix and OSF/1.
+
+Wed Nov 16 15:28:29 1994  Rob Savoye  (rob@cygnus.com)
+
+start-sanitize-gdbtk
+	* Makefile.in: Fix the test for installing gdbtk.
+end-sanitize-gdbtk
+
+	* hppa-tdep.c: Remove including sys/dir.h from a target file.
+
+Wed Nov 16 10:31:27 1994  J.T. Conklin  (jtc@cygnus.com)
+
+	* config/powerpc/gdbserve.mt (TDEPFILES): Remove fake_aio.o.
+
+	* nlm/gdbserve.c: Include <nwtypes.h> before other NetWare headers.
+	* nlm/ppc.c: Likewise. 
+
+	* nlm/ppc.c (strtol): Remove, it is provided by NetWare C Library.
+	(StopBell): New function (stubbed out).
+
+Wed Nov 16 00:12:21 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (skip_trampoline_code): Handle shared library import
+	trampolines.
+
+Tue Nov 15 16:18:52 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* c-exp.y (yylex): Fix a bug in template scanning.
+
+Tue Nov 15 14:25:47 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* i386-stub.c, m68k-stub.c, sparc-stub.c, sparcl-stub.c: Mask out
+	the top bit returned by getDebugChar.
+
+Tue Nov 15 01:03:56 1994  Rob Savoye  (rob@slipknot.cygnus.com)
+
+	* op50-rom.c, w89k-rom.c, monitor.c: Modify to usr two variables
+	to set remote load type and protocol.
+	* rom68k-rom.c: Add to_stop in target_ops.
+
+start-sanitize-gdbtk
+Mon Nov 14 08:51:29 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* Makefile.in:  Install gdbtk.tcl.
+	* configure.in:  Add ENABLE_GDBTK flag.
+	* gdbtk.c (gdb_sourcelines):  Returns list of source lines
+	containing code.  (gdb_regnames):  Returns list of register names.
+end-sanitize-gdbtk
+
+Sat Nov 12 21:55:47 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* somsolib.c: Add TODO list.
+	(som_solib_add): Immediately return if $SHLIB_INFO$ sections does
+	not exist or has size zero.  Slightly simplify error handling.
+	Keep an internal list of all the loaded shared libraries and
+	various tidbits of information about the loaded shared libraries.
+	Build section tables for each loaded shared library and add those
+	tables to the core target if necessary.
+	(som_solib_create_inferior_hook): Force re-reading of shared
+	libraries at exec time.
+	(som_sharedlibrary_info_command): New function for dumping
+	information about the currently loaded shared libraries.
+	(_initialize_som_solib): New function.
+
+Sat Nov 12 02:26:50 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* Makefile.in (copying.o, f-exp.tab.o, dpx2-nat.o, dstread.o,
+	i386aix-nat.o, i386m3-nat.o, irix5-nat.o, lynx-nat.o, m3-nat.o,
+	mipsm3-nat.o, ns32km3-nat.o, remote-e7000.o, remote-os9k.o):
+	Add dependencies.
+	(copying.o, os9kread.o, remote.o):  Update dependencies.
+
+	* valarith.c (value_sub):  When subtracting pointers, only
+	check for a match of the pointed to element lengths.
+	Cast element length to LONGEST to obtain a signed result for
+	pointer subtractions.
+
+Fri Nov 11 10:51:07 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* ch-exp.y (yylex): Fix off-by-one error when converting string to
+	lowercase.  Null terminate new string.
+
+	* hppa-tdep.c (rp_saved): Handle IMPORT stubs too.
+
+	* somsolib.c (som_solib_add): Check the value of __dld_flags, if
+	it indicates __dld_list is not valid return an error.  If it
+	indicates that libraries were not mapped privately, issue a
+	warning.
+
+Thu Nov 10 23:17:45 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* symfile.c (syms_from_objfile): Only call find_lowest_section if
+	no ".text" section exists.
+
+Thu Nov 10 15:16:21 1994  Rob Savoye  <rob@rtl.cygnus.com>
+
+	* rom68k-rom.c: New file. Replaces the old remote-mon.c and uses
+	the new generic ROM interface in monitor.c.
+	* config/m68k/monitor.mt: Use new ROM support.
+	* monitor.c: Add support for xmodem download protocol.
+
+Wed Nov  9 18:46:24 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* findvar.c (find_saved_register): Fix a frame variable name.
+	* infcmd.c (finish_command): Ditto.
+
+Tue Nov  8 13:20:14 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* TODO: Remove "Watchpoints seem not entirely reliable, though
+	they haven't failed me recently." item--this old (4.6 at least)
+	item is too vague to be useful (some watchpoint bugs have been
+	fixed since then).
+	* TODO: Add explanation of "RPC interface" item.
+
+Mon Nov  7 22:25:21 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (read_unwind_info): Use "text_offset" for linker
+	stub unwind descriptors too.
+
+	* Enable backtracing from inside a SOM shared library back into
+	user code.
+	* hppa-tdep.c (internalize_unwinds): Accept and use new
+	"text_offset" argument for dynamic relocation of
+	region_{start,end} fields in the unwind descriptor.
+	(read_unwind_info): Pass text_offset to internalize unwinds.
+
+Mon Nov  7 14:34:42 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* m3-nat.c: Remove comments about arbitrary limit in
+	printf_filtered; that limit is gone.
+
+Mon Nov  7 00:27:16 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* Beginnings of SOM shared library support.  Breakpoints and
+	single frame backtracing within the library only.  Only works when
+	using the HPUX 9 dynamic linker.  More functionality to be added
+	soon.
+
+	* somsolib.c, somsolib.h: New files.
+	* Makefile.in (HFILES_NO_SRCDIR): Add somsolib.h
+	(ALLDEPFILES): Add somsolib.c.
+	(somsolib.o): Add some dependencies.
+	* somread.c (som_symtab_read): Accept multiple section offsets.
+	All callers changed.  Adjust all text symbols with the first
+	section offset.
+	* symfile.c (find_lowest_section): Enable this function.  Add some
+	tie-breaking logic when sections have the same vma.
+	(syms_from_objfile): Use find_lowest_section rather than looking
+	for ".text" by name.  Relax warning to only warn if the lowest
+	section is not a code section.
+	* config/pa/{hppabsd.mh, hppahpux.mh} (NATDEPFILES): Add somsolib.o
+	* config/pa/{nm-hppab.h, nm-hppah.h}: Include somsolib.h.
+	
+Sun Nov  6 12:54:54 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* partial-stab.h (N_TEXT): Put back GDB_TARGET_IS_HPPA kludge,
+	it is still needed for GCC-2.6 compiled code.
+	* TODO (GDB_TARGET_IS_HPPA): Note this kludge can be nuked
+	sometime after GCC-2.7 has been released.
+
+	* hppa-tdep.c (frame_saved_pc): Mask off low two bits when
+	retrieving the PC from a signal handler caller.  Fix thinko
+	in Stan's last change ("frame", should have been "frame->next").
+	If the next frame is a signal handler caller and it's a system
+	call which has entered the kernel ((PSW & 0x2) != 0), then the
+	saved pc is in %r2 instead of %r31.
+	
+Fri Nov  4 23:47:07 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (hppa_frame_find_saved_regs): Change "frame" to
+	"frame_info" throughout.
+
+Fri Nov  4 16:26:59 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* sparcl-stub.c: get rid of defs.h.
+
+Fri Nov  4 13:11:54 1994  Jim Kingdon  <kingdon@deneb.cygnus.com>
+
+	* gdbserver/Makefile.in (MMALLOC_CFLAGS): Add -I${MMALLOC_DIR}.
+	Correct definition of MMALLOC_DIR to reflect fact this is
+	gdb/gdbserver/Makefile.in, not gdb/Makefile.in.
+
+	* gdbserver/server.c (main): After we kill the inferior in
+	response to a 'k' request, exit.
+
+	* remote.c (remote_kill): Use catch_errors when calling putpkt.
+	(putpkt): Return int, not void, to match catch_errors calling
+	convention.
+
+Fri Nov  4 10:52:38 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* rs6000-tdep.c (pop_frame): Correct a variable name.
+
+Fri Nov  4 05:43:35 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* TODO: Re-write item about SIGINT handling to reflect the fact
+	that target_stop now exists.
+
+Thu Nov  3 15:19:17 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	Replace useless FRAME, FRAME_ADDR types with struct frame_info *
+	and CORE_ADDR, respectively.
+	* frame.h (FRAME, FRAME_INFO_ID, FRAME_ADDR): Remove.
+	* blockframe.c (get_frame_info): Remove.
+	* a29k-tdep.c, alpha-tdep.c, blockframe.c, breakpoint.c,
+	breakpoint.h, energize.c, findvar.c, gould-pinsn.c,
+	h8300-tdep.c, h8500-tdep.c, hppa-tdep.c, i386-tdep.c, i960-tdep.c,
+	infcmd.c, inferior.h, infrun.c, m68k-tdep.c, m88k-tdep.c,
+	mips-tdep.c, nindy-tdep.c, printcmd.c, pyr-tdep.c, rs6000-tdep.c,
+	sh-tdep.c, sparc-tdep.c, stack.c, valops.c, z8k-tdep.c,
+	config/a29k/tm-a29k.h, config/alpha/tm-alpha.h,
+	config/gould/tm-pn.h, config/h8300/tm-h8300.h,
+	config/h8500/tm-h8500.h, config/mips/tm-mips.h,
+	config/ns32k/tm-merlin.h, config/ns32k/tm-umax.h,
+	config/pyr/tm-pyr.h, config/sparc/tm-sparc.h): Replace FRAME with
+	struct frame_info * everywhere, replace FRAME_ADDR with CORE_ADDR,
+	rename variables consistently (using `frame' or `fi'), remove
+	calls to get_frame_info and FRAME_INFO_ID, remove comments about
+	FRAME and FRAME_ADDR cruftiness.
+
+Thu Nov  3 14:25:24 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* corelow.c, exec.c, inftarg.c, m3-nat.c, op50-rom.c, procfs.c,
+	remote-adapt.c, remote-e7000.c, remote-eb.c, remote-es.c,
+	remote-hms.c, remote-mips.c, remote-mm.c, remote-mon.c,
+	remote-nindy.c, remote-os9k.c, remote-pa.c, remote-sim.c,
+	remote-st.c, remote-udi.c, remote-vx.c, remote-z8k.c, remote.c,
+	w89k-rom.c, target.c, target.h:  Add support for target_stop().
+start-sanitize-gdbtk
+	* gdbtk.c (gdb_stop):  Switch to target_stop().
+end-sanitize-gdbtk
+
+Thu Nov  3 01:23:45 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* osfsolib.c (solib_map_sections, first_link_map_member,
+	next_link_map_member, xfer_link_map_member):  Retrieve and use
+	shared library relocation offset from runtime loader structures.
+	Use libxproc.a routines to get a working version if
+	USE_LDR_ROUTINES is defined.
+	* README:  Remove item about shared library relocation for
+	Alpha OSF/1.
+
+Wed Nov  2 15:05:39 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* c-exp.y (yylex): scan template names, and scan nested class
+	names.
+
+Wed Nov  2 11:01:55 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* nlm/Makefile.in: install gdbserve.nlm.
+
+start-sanitize-gdbtk
+Tue Nov  1 16:41:12 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* Makefile.in:  Use $(objdir)/tcl and $(objdir)/tk if they are
+	available.
+	* configure.in (ENABLE_CLIBS):  Use $(TCL) and $(TK) instead of
+	-ltcl and -ltk.
+	* gdbtk.c:  Get rid of lots of unnecessary #includes.
+	* (gdbtk_init):  Use ConnectionNumber macro instead of referencing
+	Display structure directly.
+	* gdbtk.tcl:  Change exit button to quit button.
+end-sanitize-gdbtk
+
+Tue Nov  1 13:00:46 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* c-valprint.c (c_value_print):  Check for plain literal `char'
+	target type when suppressing `(char *)' output for strings.
+
+Mon Oct 31 19:19:51 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* coffread.c (coff_symfile_init): Remove unused local abfd.
+	* utils.c [NO_MMALLOC] (mmalloc, mrealloc): Define and use size_t
+	instead of long, for compatibility with mmalloc.h.
+
+Sat Oct 29 02:40:40 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* top.c (line_completion_function):  Renamed from
+	symbol_completion_function, takes the line buffer and the
+	point in the line buffer as additional arguments.
+	(readline_line_completion_function):  New function, interface
+	between readline and line_completion_function.
+	(init_main):  Use it.
+	(complete_command):  Use line_completion_function instead of
+	abusing rl_line_buffer. Free completion strings after printing
+	them.
+	* symtab.c (completion_list_add_name):  Recheck for duplicates
+	if we intend to add a modified symbol.
+
+	* gdbtypes.h (cplus_struct_type):  nfn_fields_total no longer
+	includes the number of methods from the baseclasses.
+	* stabsread.c (attach_fn_fields_to_type):  No longer add the
+	number of methods from the baseclasses to TYPE_NFN_FIELDS_TOTAL,
+	the baseclass type might not have been completely filled in yet.
+	* symtab.c (total_number_of_methods):  New function to compute
+	the total number of methods for a type, including the methods
+	from baseclasses.
+	(decode_line_1):  Use it instead of TYPE_NFN_FIELDS_TOTAL to
+	allocate the symbol array for find_methods.
+
+	* stabsread.c (scan_file_globals):  Add default case to minimal
+	symbol type switch, to avoid gcc -Wall warnings.
+
+	* config/rs6000/tm-rs6000.h (INIT_EXTRA_FRAME_INFO):
+	Don't test for zero backchain pointer to recognize a signal
+	handler frame, if read() gets interrupted by a signal, the
+	backchain will be non zero.
+	(SIG_FRAME_FP_OFFSET):  Move to here from rs6000-tdep.c,
+	improve comment.
+	(SIG_FRAME_PC_OFFSET):  New definition.
+	(FRAME_SAVED_PC):  Return saved pc from sigcontext if this
+	is a signal handler frame.
+	* rs6000-tdep.c (function_frame_info):  Do not error out
+	if we can't access the instructions.
+
+	* config/rs6000/tm-rs6000.h (CONVERT_FROM_FUNC_PTR_ADDR):
+	New definition to get the function address from a function pointer.
+	* valops.c (find_function_addr):  Use it when calling a user
+	function through a function pointer.
+
+Fri Oct 28 16:16:52 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* Makefile.in (MMALLOC_DIR): New definition.
+	(MMALLOC): Use MMALLOC_DIR.
+	(MMALLOC_CFLAGS): Look in MMALLOC_DIR for mmalloc.h.
+	(OPCODES): Remove gratuitous "./".
+	* defs.h (mmalloc.h): Include.
+	(mmalloc, mrealloc, etc): Remove decls.
+	(cplus_demangle, cplus_demangle_opname): Remove decls.
+
+Wed Oct 26 15:41:07 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* defs.h, main.c, top.c:  Change sense and name of
+	no_windows variable.  Now called use_windows, and defaults to off
+	(for compatibility).
+start-sanitize-gdbtk
+	* gdbtk.c: Ditto.
+end-sanitize-gdbtk
+
+Wed Oct 26 12:20:53 1994  Jim Kingdon  <kingdon@cygnus.com>
+
+	* coffread.c (coff_symtab_read): If we get the address from
+	target_lookup_symbol, set the section to -2 not SECT_OFF_BSS.
+	(coff_symtab_read): Set value and section of symbol that
+	process_coff_symbol returns.
+
+Tue Oct 25 09:53:04 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* config/i386/tm-nbsd.h: Enable longjmp support.
+
+Sat Oct 22 03:41:13 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* valarith.c (value_binop):  Take care of ANSI `value preserving'
+	rule, which was not addressed by the previous change.
+
+	* rs6000-tdep.c (skip_prologue):  Handle `mr r31,r1', which is
+	generated by gcc-2.6, as a synonym for `oril r31,r1,0'.
+
+	* TODO:  Remove item about RS/6000 shared libraries.
+
+Thu Oct 20 17:35:45 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* defs.h, infrun.c (wait_for_inferior), top.c:  Call
+	target_wait_hook to allow GUI to handle blocking for inferior.  Call
+	call_command_hook in execute_command to provide means for wrapping
+	commands with GUI state change updates.
+start-sanitize-gdbtk
+	* gdbtk.c (gdb_cmd):  Force GUI into idle mode when errors occur.
+	* (gdb_stop):  New tcl command to stop the target process.
+	* (x_event, gdbtk_wait):  Allow GUI to interrupt gdb out of target
+	waits.
+	* (gdbtk_call_command):  Wrapper around command processing to
+	alert GUI of target state changes.
+	* (gdbtk_init):  Get the fd of X server for doing async
+	notification of X events (via x_event).  Setup new hooks.
+	* gdbtk.tcl:  Add scrollbars to assembly and command windows.
+	* Change window foreground & background colors.
+	* Create margin tag for breakpoints in source and assembly windows.
+	* Add new routines to be invoked when target state changes to/from
+	idle.
+	* Add start of expression window.
+	* Change bindings of mouse button 1 in assembly and source window
+	to just set or clear breakpoints when in the margin tag.
+	* Change shape of register window to be more vertical to better
+	reflect its contents.
+	* Add stop button.
+	* Cleanup some code around command window bindings.
+end-sanitize-gdbtk
+
+	* infrun.c (wait_for_inferior):  Make sure
+	through_sigtramp_breakpoint is non-null before deleting.
+
+Thu Oct 20 10:26:43 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* config/powerpc/ppc-nw.mt (TDEPFILES): Removed exec.o.
+
+Thu Oct 20 06:56:07 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Makefile.in (coffread.o): Depend on target.h.
+	(remote-vx.o): Depend on gdb-stabs.h objfiles.h symfile.h $(bfd_h).
+
+Wed Oct 19 22:49:31 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* TODO: Fix typo.
+
+Wed Oct 19 11:32:15 1994  Jim Kingdon  <kingdon@cygnus.com>
+
+	* objfiles.c (objfile_relocate): When relocating ->sections, use
+	objfile not symfile_objfile.
+
+	* symtab.h, minsyms.c (minsyms_sort): New function.
+	* objfiles.c (objfile_relocate): Call it.
+
+	* remote-vx.c (vx_add_symbols): Call breakpoint_re_set.
+
+	* objfiles.c, objfiles.h (objfile_to_front): New function.
+	* remote-vx.c (vx_add_symbols): Call it.
+
+	* coffread.c (coff_symtab_read): Handle common symbols the same
+	way that partial-stab.h does.
+
+Wed Oct 19 21:06:12 1994  Rob Savoye  (rob@cirdan.cygnus.com)
+
+	* hppa-tdep.c: Remove include files a.out.h, ioctl.h, and
+	machine/psl.h. These are host files.
+
+Wed Oct 19 15:13:51 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* objfiles.h (struct objfile): Fix comment--minimal_symbol_count
+	does *not* include the terminating NULL msymbol.
+
+Tue Oct 18 20:53:29 1994  Rob Savoye  <rob@darkstar.cygnus.com>
+
+	* monitor.c (monitor_load_srec,monitor_make_srec): Add an asrecord
+	loader that reads files using BFD and converts it on the fly.
+
+Mon Oct 17 18:52:06 1994  Rob Savoye  <rob@darkstar.cygnus.com>
+
+	* monitor.c (set_loadtype_command): Fixed so it doesn't core dump.
+	* monitor.c (monitor_load): check the load type and load the file
+	accordingly. Default to gr_load_image().
+	* monitor.c (monitor_load_ascii_srec): Load an ascii file in
+	srecord format by downloading to the monitor.
+	* w89k-rom.c, op50n-rom.c: set supported load types.
+
+Mon Oct 17 10:29:08 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Makefile.in (ALLDEPFILES): Remove xcoffexec.c.
+	* Makefile.in: Remove xcoffexec.o rule.
+
+	* exec.c (exec_file_command): Add comment.
+
+	Fix data and bss relocation for VxWorks 5.1:
+	* remote-vx.c (vx_add_symbols): New function.
+	(vx_load_command, add_symbol_stub): Call it instead of
+	symbol_file_add.
+	(vx_wait): Remove comment which was wrong to useless.
+	* remote-vx.c: Reindent much of file.
+	* coffread.c (cs_to_section, find_targ_sec): New functions.
+	(process_coff_symbol): Set SYMBOL_SECTION to result
+	from cs_to_section.
+	(coff_symtab_read): Call cs_to_section and deal with result
+	rather than assuming sections are in a certain order.  Deal with
+	BSS.
+	* coffread.c: Remove text_bfd_scnum variable.
+
+Sat Oct 15 16:55:48 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* corelow.c: Format to standard.
+	(core_close): Use name instead of bfd_filename.
+
+Fri Oct 14 10:29:08 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* exec.c (map_vmap): Cast return from xmalloc to its proper type,
+	not to PTR.
+
+	* symfile.c (reread_symbols): Include bfd_errmsg string in error
+	message if bfd_close fails.
+	* exec.c (exec_close), solib.c (clear_solib), corelow.c
+	(core_close), objfiles.c (free_objfile), irix5-nat.c
+	(clear_solib), osfsolib.c (clear_solib), remote-utils.c
+	(gr_load_image): Check for errors from bfd_close.
+	* solib.c (look_for_base), remote-utils.c (gr_load_image),
+	remote-udi.c (download), corelow.c (core_open), symfile.c
+	(symfile_bfd_open), symfile.c (generic_load): Add comment
+	regarding error from bfd_close.
+	* remote-udi.c (download), remote-utils.c (gr_load_image): Add
+	comment about bogus handling of errors from bfd_openr.
+	* exec.c (exec_close): Add comment regarding memory leak and
+	dangling reference to vp->name.
+
+Sat Oct 15 03:43:00 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* eval.c (evaluate_subexp):  Make fnptr a LONGEST instead
+	of using longest_to_int.
+
+	* infcmd.c (run_stack_dummy):  Reinstate set_current_frame call,
+	mips and alpha targets need the real breakpoint pc for
+	creating the breakpoint frame.
+
+	* stack.c (return_command):  Cast return value to the return
+	type of the function from which we return.
+	* values.c (set_return_value):  Pass VALUE_CONTENTS unmodified
+	to STORE_RETURN_VALUE.
+
+	* symtab.c (lookup_symbol):  Remove search for `static mangled
+	symbols', the search for `static symbols' already looks for
+	mangled and demangled symbols via lookup_block_symbol.
+
+	* valarith.c (value_binop):  Use ANSI C arithmetic conversions
+	when performing integral evaluations, implement BINOP_EQUAL and
+	BINOP_LESS.
+	(value_equal, value_less):  Use value_binop to perform the
+	comparison if both operands have TYPE_CODE_INT.
+
+	* rs6000-tdep.c (pop_frame):  Make sure all registers are valid,
+	as they are written back later. Handle sp restore for frameless
+	functions. Use fdata.nosavedpc instead of fdata.frameless to
+	determine if the pc has been saved.
+	(function_frame_info):  Handle `mr r31,r1', which is generated by
+	gcc-2.6, as a synonym for `oril r31,r1,0'.
+	(skip_trampoline_code):  Handle shared library trampolines.
+	* xcoffread.c (read_xcoff_symtabs):  Record XMC_GL symbols with
+	their real name. Enables setting of breakpoints in shared libraries
+	before the executable is run.
+
+Fri Oct 14 19:39:47 1994  Rob Savoye  <rob@darkstar.cygnus.com>
+
+	* monitor.h, remote-mon.c: Hack up to so the old ROM monitor
+	interface code still works with the new ROM monitor
+	structures. Fake out a couple of fields.
+
+Fri Oct 14 14:54:37 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* h8500-tdep.c (target_read_sp, target_write_sp, target_read_pc,
+	target_write_pc, target_read_fp, target_write_fp): Rename to
+	h8500_read_sp, etc.
+	(h8500_read_pc, h8500_write_pc): Add pid argument.
+	* config/h8500/tm-h8500.h (TARGET_READ_SP, TARGET_WRITE_SP,
+	TARGET_READ_PC, TARGET_WRITE_PC, TARGET_READ_FP, TARGET_WRITE_FP):
+	Change to match functions above.
+
+Thu Oct 13 13:24:29 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* NEWS: Add item about if and while.
+
+	* .gdbinit: Restore `end'; it was not excess.  Reindent
+	list-objfiles to make this clear.  Comment out all of
+	list-objfiles because old gdb's choke on it.
+
+Wed Oct 12 23:19:08 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
+
+	* config/mips/tm-bigmips64.h: Just define TARGET_BYTE_ORDER and
+	include tm-mips64.h.
+
+Wed Oct 12 18:02:17 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* Makefile.in (ANNOTATE_OBS): New definition.
+	(COMMON_OBS): Add exec.o.
+	(annotate.o): Remove extra compile rule.
+	* config/*/*.mh, config/*/*.mt: Remove exec.o from *DEPFILES lists
+	everywhere.
+
+ 	* .gdbinit: Remove excess `end'.
+
+	* exec.c: Merge in RS6000 support from xcoffexec.c.
+	(symfile.h, objfiles.h, xcoffsolib.h): Include.
+	(vmap): New global variable.
+	(exec_close): Close and free objects in vmap chain.
+	(exec_file_command) [IBM6000_TARGET]: Set up initial vmap.
+	(bfdsec_to_vmap, map_vmap): Moved here from xcoffexec.c.
+	(exec_files_info): Print vmap information.
+	* xcoffexec.c: Remove.
+	* config/rs6000/rs6000.mt, config/rs6000/rs6000lynx.mt
+	(TDEPFILES): Use exec.o instead of xcoffexec.o.
+	* TODO: Remove pertinent items.
+
+Wed Oct 12 10:08:19 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* partial-stab.h (N_TEXT): Delete GDB_TARGET_IS_HPPA kludge; they
+	are no longer needed as of gcc-2.6.0.
+
+Tue Oct 11 15:51:01 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
+
+	* lynx-nat.c (child_wait): Correct handling of byte reversed SPARC
+        Lynx wait status.
+	(fetch_core_registers): Don't try to fetch a register if
+	regmap maps it to -1.
+	* sparc-tdep.c (sparc_frame_find_saved_regs): Use FRAME_SAVED_I0
+	and FRAME_SAVED_L0 when setting saved_regs_addr.  SPARC Lynx
+	stores the registers in a weird order.
+
+Sat Oct  8 20:59:13 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* blockframe.c (reinit_frame_cache): Reinstate select_frame call
+	if inferior_pid is nonzero.
+
+Sat Oct  8 04:27:21 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	Speed up GDB startup time by not demangling partial symbols.
+	* symfile.h (ADD_PSYMBOL_VT_TO_LIST),
+	symfile.c (add_psymbol_to_list, add_psymbol_addr_to_list):
+	No longer demangle partial symbols.
+	* symtab.c (lookup_symbol, list_symbols): Handle mangled
+	variables, e.g. C++ static members, via the minimal symbols.
+
+	Handle reordered functions in an objfile, for Irix 5.2 shared
+	libraries.
+	* objfiles.h (OBJF_REORDERED):  New bit in the objfile flags,
+	set if the functions in an objfile are reordered.
+	* mdebugread.c (parse_partial_symbols):  Detect reordered
+	functions in an objfile.
+	* symtab.c (find_pc_psymtab, find_pc_symtab):  Use expensive
+	lookup algorithm if the functions in the objfile are reordered.
+
+	* xcoffexec.c (exec_close):  If the current target has a copy
+	of the exec_ops sections, reflect the freeing of the sections
+	in current_target.
+
+	* valops.c (call_function_by_hand):  Use `sizeof dummy1', not
+	`sizeof dummy', for constructing the call dummy code.
+
+	* config/sparc/tm-sparc.h:  Add PARAMS declarations to all
+	function declarations.
+	* sparc-tdep.c (sparc_pop_frame):  Cast result of
+	read_memory_integer to CORE_ADDR when passing it to PC_ADJUST.
+
+	* irix5-nat.c (enable_break):  Set breakpoint at the entry point
+	of the executable, to handle the case where main resides in a
+	shared library.
+	* irix5-nat.c (solib_create_inferior_hook):  Reset stop_soon_quietly
+	after shared library symbol reading, to get rid of a warning from
+	heuristic_proc_start if the startup code has no symbolic debug info.
+
+	* breakpoint.h (struct breakpoint):  Add new fields language
+	and input_radix, to enable breakpoint resetting with the
+	proper language and radix.
+	* breakpoint.c (set_raw_breakpoint):  Initialize them.
+	(breakpoint_re_set_one):  Use them when resetting the breakpoint.
+	(breakpoint_re_set):  Preserve current language and input_radix
+	across breakpoint_re_set_one calls.
+
+	* symtab.c (decode_line_1):  Do not build a canonical line
+	specification for `*expr' line specifications.
+
+	* breakpoint.h (bpstat_stop_status):  Fix prototype declaration.
+
+Fri Oct  7 08:48:18 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	The point of these changes is to avoid reading the frame pointer
+	and stack pointer during stepping, to speed things up.
+	A.  Changes to not select a frame until we need a selected frame:
+	    * blockframe.c (flush_cached_frames): Call select_frame (NULL, -1).
+	    * infrun.c (wait_for_inferior): Move call to select_frame back to
+	    normal_stop.  This reverts a change of 13 Apr 94 (it says Jeff
+	    Law, but the change was my idea); the only reason for that change
+	    was so we could save and restore the selected frame in
+	    wait_for_inferior, and now that flush_cached frames clears the
+	    selected frame, that should work OK now.
+	B.  Changes to not create a current_frame until we need one:
+	    * blockframe.c (get_current_frame): If current_frame is NULL, try
+	    to create an innermost frame.
+	    * sparc-tdep.c (sparc_pop_frame), infcmd.c (run-stack_dummy),
+	    infrun.c (wait_for_inferior), thread.c (thread_switch),
+	    convex-tdep.c (set_thread_command), a29k-tdep.c (pop_frame),
+	    alpha-tdep.c (alpha_pop_frame), convex-xdep.c (core_file_command),
+	    h8300-tdep.c (h8300_pop_frame), h8500-tdep.c (h8300_pop_frame),
+	    hppa-tdep.c (hppa_pop_frame), i386-tdep.c (i386_pop_frame),
+	    i960-tdep.c (pop_frame), m68k-tdep.c
+	    (m68k_pop_frame), mips-tdep.c (mips_pop_frame), rs6000-tdep.c
+	    (push_dummy_frame, pop_dummy_frame, pop_frame), sh-tdep.c
+	    (pop_frame), config/arm/tm-arm.h (POP_FRAME),
+	    config/convex/tm-convex.h (POP_FRAME), config/gould/tm-pn.h
+	    (POP_FRAME), config/ns32k/tm-merlin.h (POP_FRAME),
+	    config/ns32k/tm-umax.h (POP_FRAME), config/tahoe/tm-tahoe.h
+	    (POP_FRAME), config/vax/tm-vax.h (POP_FRAME): Don't
+	    call create_new_frame.
+	    * corelow.c (core_open), altos-xdep.c (core_file_command),
+	    arm-xdep.c (core_file_command), gould-xdep.c (core_file_command),
+	    m3-nat.c (select_thread), sun386-nat.c (core_file_command),
+	    umax-xdep.c (core_file_command): Don't call create_new_frame; do
+	    call flush_cached_frames.
+	    * blockframe.c (reinit_frame_cache): Don't call create_new_frame
+	    or select_frame.
+	C.  Changes to get rid of stop_frame_address and instead only
+	fetch the frame pointer when we need it.
+	    * breakpoint.c (bpstat_stop_status): Remove argument
+	    frame_address; use FRAME_FP (get_current_frame ()).
+	    * infrun.c (wait_for_inferior): Don't pass frame pointer to
+	    bpstat_stop_status.
+	    * infrun.c (wait_for_inferior): Use FRAME_FP (get_current_frame
+	    ()) instead of stop_frame_address.
+	    * infrun.c (save_inferior_status, restore_inferior_status),
+	    inferior.h (struct inferior_status): Don't save and restore
+	    stop_frame_address.
+	    * inferior.h, infcmd.c, thread.c (thread_switch), m3-nat.c
+	    (select_thread): Remove stop_frame_address and uses thereof.
+	D.  Same thing for the stack pointer.
+	    * infrun.c (wait_for_inferior): Remove stop_sp and replace
+	    uses thereof with read_sp ().
+	E.  Change to eliminate one nasty little spot where we were
+	wanting to know the frame pointer from before the current step
+	(idea from GDB 3.5, which saved my ass, because my other ideas of
+	how to fix it were very baroque).
+	    * infrun.c: Remove prev_frame_address.
+	    * infrun.c (wait_for_inferior, step_over_function): Use
+	    step_frame_address instead of prev_frame_address.
+	F.  Same basic idea for the stack pointer.
+	    * inferior.h, infcmd.c: New variable step_sp.
+	    * infcmd.c (step_1, until_next_command): Set it.
+	    * infrun.c: Remove prev_sp and replace uses by step_sp.
+	    * infrun.c (wait_for_inferior): If we get out of the step
+	    range, then set step_sp to the current stack pointer before we
+	    start going again.
+
+Fri Oct  7 12:17:17 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
+
+	* top.c (target_byte_order_auto): New static variable.
+	(set_endian): Mention that ``auto'' is permitted.
+	(set_endian_auto): New static function.
+	(show_endian): Change message based on target_byte_order_auto.
+	(set_endian_from_file): New function.
+	(init_main): Add command ``auto'' to endianlist.
+	* exec.c (exec_file_command): Call set_endian_from_file.
+	* defs.h (set_endian_from_file): Declare.
+
+Thu Oct  6 18:10:41 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* nlm/i386.c (flush_i_cache): New function, does nothing.
+	(frame_to_registers, registers_to_frame, set_step_traps,
+	clear_step_traps, do_status): Make non-static.
+
+Thu Oct  6 12:26:42 1994  Ian Lance Taylor  <ian@sanguine.cygnus.com>
+
+	* config/mips/tm-mips.h (GDB_TARGET_IS_MIPS64): If not already
+	defined, define as 0.
+	(FIX_CALL_DUMMY): Rewrite to remove presumption that host and
+	target are similar.
+	* config/mips/tm-idt.h (TARGET_BYTE_ORDER_SELECTABLE): Define.
+	* config/mips/tm-idtl.h (TARGET_BYTE_ORDER_SELECTABLE): Define.
+	* config/mips/tm-idt64.h (TARGET_BYTE_ORDER_SELECTABLE): Define.
+	(BREAKPOINT): Remove definition.
+	* config/mips/tm-idtl64.h (TARGET_BYTE_ORDER_SELECTABLE): Define.
+	(BREAKPOINT): Remove definition.
+	* config/mips/tm-mips64.h (GDB_TARGET_IS_MIPS64): Define with a
+	value of 1, rather than without a value.
+	* config/mips/tm-bigmips64.h (GDB_TARGET_IS_MIPS64): Likewise.
+	* mips-tdep.c: Rewrite uses of GDB_TARGET_IS_MIPS64 to switch at
+	run time rather than at compile time.
+
+	* remote-mips.c (break_insn): Remove.
+	(BREAK_INSN, BREAK_INSN_SIZE): Define.
+	(mips_insert_breakpoint): Use BREAK_INSN, not break_insn.
+	(mips_remove_breakpoint): Likewise.
+
+	* defs.h: If TARGET_BYTE_ORDER_SELECTABLE is defined by tm.h,
+	define TARGET_BYTE_ORDER as target_byte_order, and declare
+	target_byte_order as an extern int, and define BITS_BIG_ENDIAN as
+	a test of TARGET_BYTE_ORDER.
+	* top.c: Several additions if TARGET_BYTE_ORDER_SELECTABLE is
+	defined:
+	(endianlist, target_byte_order): New variables.
+	(set_endian, set_endian_big, set_endian_little): New functions.
+	(show_endian): New function.
+	(init_cmd_lists): Initialize endianlist.
+	(init_main): Add commands ``set endian big'', ``set endian
+	little'', and ``show endian''.
+	* a29k-pinsn.c: Rewrite uses of TARGET_BYTE_ORDER and
+	BITS_BIG_ENDIAN to switch at run time rather than at compile time.
+	* coffread.c, dwarfread.c, findvar.c, mips-tdep.c: Likewise.
+	* remote-os9k.c, stabsread.c, valarith.c, valprint.c: Likewise.
+	* values.c: Likewise.
+
+Wed Oct  5 11:41:24 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* nlm/configure.in: ${gdb_host_cpu} defaults to ${host_cpu}.
+
+	* nlm/Makefile.in: Get rid of NWINCLUDES.
+	* config/{alpha,powerpc}/gdbserve.mt: Remove NWINCLUDES.
+	  User should now configure with --with-headers.
+
+Mon Oct  3 07:48:34 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdbserver/server.c (main): Silently accept all unrecognized
+	requests and send back a zero length acknowledge.  That is what
+	*-stub.c do and is what remote.c expects.
+
+Mon Oct  3 05:11:47 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* corelow.c (core_open):  Copy the modified to_sections_end
+	vector from current_target to core_ops too.
+
+	* gdbserver/server.c (main):  Silently accept query requests
+	and send back a zero length acknowledge.
+
+Fri Sep 30 17:17:21 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+        * nlm/Makefile.in: Don't define NWINCLUDES.
+        * config/{alpha,powerpc}/gdbserve.mt: define NWINCLUDES.
+
+Fri Sep 30 15:59:55 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdbserver/low-lynx.c (create_inferior): Pass all 4 args to ptrace.
+
+Fri Sep 30 06:42:42 1994  Ian Lance Taylor  (ian@cygnus.com)
+
+	* lynx-nat.c (child_wait): Use status.w_status, not status, in
+	arithmetic.  status is a `union wait'.
+
+	* config/nm-lynx.h (PTRACE_ARG3_TYPE): Define to int, not char *.
+
+	* lynx-nat.c (child_wait): Pass fourth argument to ptrace.
+
+Thu Sep 29 08:22:27 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* xcoffread.c (read_xcoff_symtab): Fix comment for yesterday's change.
+
+Wed Sep 28 17:48:18 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* coffread.c (complete_symtab): If last_source_file is set upon
+	entry, free it.
+
+Wed Sep 28 08:59:14 1994  Jim Kingdon  (kingdon@cygnus.com)
+
+	* xcoffread.c (read_xcoff_symtab, case C_FILE):
+	Set main_aux before using it.
+
+	* xcoffexec.c (exec_close): If quitting, don't call clear_symtab_users.
+
+	* xcoffread.c (read_xcoff_symtab): Process XTY_LD symbols we were
+	ignoring before.  But continue to ignore XMC_DS.
+
+Wed Sep 28 00:35:23 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hpread.c (hpread_read_array_type): Do not change the type code
+	to TYPE_CODE_PTR for "char foo[]".  Just make it a zero length
+	array type.
+
+	* hpread.c (hpread_type_translate): Handle T_UNS_LONG types with
+	lengths other than 32bits (HP C 9.69 represents an "unsigned char"
+	as an T_UNS_LONG with length 8).
+
+	* hpread.c (struct hpread_symfile_info): Delete have_module field
+	and accessor macro.  Minor indentation fix.
+	(hpread_build_psymtabs, case K_MODULE):  Only start a new psymtab
+	and reset state variables have_name & texthigh if pst is NULL.
+	(hpread_build_psymtabs, case K_SRCFILE): Only reset the name of a
+	partial symbol table if pst is non-NULL.  If pst is NULL, then
+	start a new psymtab.
+	(hpread_process_one_debug_symbol, case K_MODULE): Now empty.
+	(hpread_process_one_debug_symbol, case K_SRCFILE): Simplify and
+	correct handling of subfiles.
+
+Mon Sep 26 02:59:00 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* defs.h (misc_command_type):  Remove trailing comma from
+	enumerator list.
+
+Sun Sep 25 23:19:58 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (frame_saved_pc): Fix thinko in code to dig saved pc
+	out of an interrupt frame.
+
+Sun Sep 25 12:50:17 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* infcmd.c (do_registers_info) [INVALID_FLOAT]: Only use if
+	defined.
+	* values.c (unpack_double) [INVALID_FLOAT]: Ditto.
+	* mips-tdep.c (mips_print_register): Don't test float validity.
+	* config/a29k/tm-a29k.h, config/alpha/tm-alpha.h,
+	config/arm/tm-arm.h, config/convex/tm-convex.h,
+	config/h8300/tm-h8300.h, config/h8500/tm-h8500.h,
+	config/i386/tm-i386v.h, config/i386/tm-sun386.h,
+	config/i960/tm-i960.h, config/m68k/tm-m68k.h,
+	config/m88k/tm-m88k.h, config/mips/tm-mips.h,
+	config/ns32k/tm-merlin.h, config/ns32k/tm-nbsd.h,
+	config/ns32k/tm-ns32km3.h, config/ns32k/tm-umax.h,
+	config/pa/tm-hppa.h, config/pyr/tm-pyr.h,
+	config/rs6000/tm-rs6000.h, config/sh/tm-sh.h,
+	config/sparc/tm-sparc.h, config/z8k/tm-z8k.h (INVALID_FLOAT):
+	Remove definition.
+
+Sun Sep 25 06:07:37 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* TODO: Remove item about adding general multi-threaded stuff;
+	this is done.
+	Remove item about specifying arbitrary locations of stack frames
+	(this works on some machines).
+	Remove item about debugging functions without a frame pointer
+	(this works on some machines).
+	Remove item about re-writing macros which handle frame chaining and
+	frameless functions.  They have been re-written at least once
+	since that item was written.
+	Remove item about gdb catching SIGINT when attached; this is done.
+	Remove item about having list_command not read symbols--why bother?
+
+Sat Sep 24 17:40:10 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* TODO: Append contents of Projects file.
+	* Projects: Remove.
+
+Sat Sep 24 01:47:25 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* corelow.c (add_solib_stub):  Remove copying of to_sections,
+	pass current_target to SOLIB_ADD. The Sep 10 change failed
+	if SOLIB_ADD errored out, or if SOLIB_ADD was trying to access
+	target memory.
+	* corelow.c (core_open):  After reading the shared libraries,
+	copy the modified to_sections vector from current_target to
+	core_ops, so that core_close can free it later.
+	* config/rs6000/nm-rs6000.h, rs6000-nat.c (xcoff_relocate_core):
+	Pass down target parameter from SOLIB_ADD and use it instead of
+	directly accessing core_ops.
+
+Fri Sep 23 14:58:49 1994  J.T. Conklin  (jtc@rtl.cygnus.com)
+
+	* solib.c: *BSD systems need <a.out.h> to be included before
+	  <link.h>.
+
+	* i386b-nat.c: Add i386_float_info(), etc.
+	* config/i386/nm-nbsd.h: #define FLOAT_INFO.
+
+	* config/nm-nbsd.h: New file, for generic NetBSD native support.
+	* config/i386/nm-nbsd.h: Use it.
+	* config/sparc/nm-nbsd.h: Use it.
+	* config/ns32k/nm-nbsd.h: Use it.
+
+	* configure.in (i386-*-netbsd): Use config/i386/nbsd.m[ht].
+	  (ns32k-*-netbsd): Use config/ns32k/nbsd.m[ht].
+	* config/i386/{nbsd.mh,nbsd.mt,nm-nbsd.h,tm-nbsd.h,xm-nbsd.h}:
+	  New files, support for NetBSD/i386.
+	* config/ns32k/{nbsd.mh,nbsd.mh,nm-nbsd.h,tm-nbsd.h,xm-nbsd.h}:
+     	  New files, support for NetBSD/ns32k.
+
+Tue Sep 20 11:34:27 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* .gdbinit: Add list-objfiles command.
+
+	* TODO: Reword item regarding NO_STD_REGS.
+
+	* coffread.c (record_minimal_symbol, coff_read_enum_type,
+	coff_read_struct_type): Allocate on symbol_obstack, not directly
+	via malloc/savestring.
+
+Tue Sep 20 15:42:02 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* TODO: Add more items.
+	* tests: Remove the directory and all of its (obsolete) contents.
+
+Tue Sep 20 11:34:27 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* coffread.c (init_stringtab): When copying length to stringtab,
+	use target format, not host format, since that is what the rest of
+	the code assumes.
+
+Mon Sep 19 15:48:10 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* Makefile.in: Removed prelude.o, i386-nlmstub.o, nlmstub.o,
+	  nlmstub.nlm, and nlmstub targets.  Removed NWSOURCE and
+	  NWINCLUDES definitions.
+	* i386-nlmstub.c: Removed.
+
+Mon Sep 19 07:48:36 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* dbxread.c (read_dbx_dynamic_symtab): Cast bfd_asymbol_name to
+	char * (from const char *) before assigning.  Don't save string we
+	pass to record_minimal_symbol (it already saves it).
+
+start-sanitize-gdbtk
+Sat Sep 17 17:05:14 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* gdbtk.tcl:  Let ^U delete lines in the command window.
+end-sanitize-gdbtk
+
+Sat Sep 17 02:26:58 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* cp-valprint.c (static_field_print):  New variable, controls
+	printing of static members.
+	(_initialize_cp_valprint):  New print set subcommand
+	"static-members". Turn on printing of static members by default.
+	(cp_print_value_fields):  Print static members if necessary.
+
+	* solib.c:  Remove inclusion of libelf.h and elf/mips.h.
+	(elf_locate_base):  Use only standard BFD functions to collect
+	information about the .dynamic section. Check for DT_MIPS_RLD_MAP
+	tag only if it got defined via the inclusion of <link.h>.
+
+	* f-exp.y:  Write block for OP_VAR_VALUE.
+	* f-valprint.c (info_common_command):  Handle `info common'
+	without an argument correctly.
+
+	* c-typeprint.c (c_type_print_base):  Handle template constructors.
+	* symtab.c (gdb_mangle_name):  Handle template method mangling,
+	get rid of GCC_MANGLE_BUG code, which only applied to gcc-2.2.2.
+
+Fri Sep 16 16:06:08 1994  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	* gdbtypes.h (TYPE_INDEX_TYPE):  New macro.
+	* ch-typeprint.c, ch-valprint.c:  Use TYPE_INDEX_TYPE.
+	* ch-valprint.c (chill_val_print):  Pass index type directly
+	(instead of its TYPE_TARGET_TYPE) to print_type_scalar.
+	* stabsread.c (read_type):  Don't set TYPE_FLAG_TARGET_STUB
+	if the index type is a stub.
+
+Fri Sep 16 17:18:44 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* config/i386/{i386aix.mh, i386bsd.mh, i386lynx.mh, i386sco.mh,
+	i386sco4.mh, i386sol2.mh, i386v.mh, i386v32.mh, i386v4.mh,
+	ncr3000.mh, ptx.mh, ptx4.mh}, config/m68k/{altos.mh, apollo68v.mh,
+	delta68.mh, dpx2.mh, hp300bsd.mh, hp300hpux.mh, m68klynx.mh,
+	m68kv4.mh}, config/m88k/{delta88.mh, delta88v4.mh},
+	config/mips/riscos.mh, config/pa/hppahpux.mh,
+	config/rs6000/rs6000lynx.mh, config/sparc/{sparclynx.mh,
+	sun4sol2.mh}, config/tahoe/tahoe.mh, config/vax/{vaxbsd.mh,
+	vaxult.mh, vaxult2.mh} (REGEX, REGEX1, SYSV_DEFINE): No longer
+	define.
+	* config/i386/i386sco4.mh (MUNCH_DEFINE): No longer define.
+
+Fri Sep 16 15:40:34 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* defs.h (QUIT):  Call interactive_hook to allow GUI to interrupt.
+	Also, add decl for symtab_to_filename.
+start-sanitize-gdbtk
+	* gdbtk.c:  Replace calls to full_filename with symtab_to_filename.  
+	* gdbtk.tcl:  New routine pc_to_line replaces in line code.  New
+	routine decr replaces in line code.
+	* (create_file_win):  Use catch to handle open failures more
+	elegantly.  Also, create special window to display file open
+	failure message.  Move opening of file prior to creation of text
+	widget.
+	* (create_asm_win):  Add PC as argument.  We now base disassembly
+	on PC instead of function name, since function names can be
+	ambiguous (usually seen with shared libs).  Also, use catch to
+	simplify code where we don't care about failures.
+end-sanitize-gdbtk
+	* source.c (symtab_to_filename):  New.  Returns the file
+	associated with a symtab.
+	* top.c:  Define interactive_hook.  Called during QUIT to animate
+	the GUI.
+
+Fri Sep 16 00:14:40 1994  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	* stabsread.c (read_type):  Handle stub types for bitstrings.
+	* stabsread.c (read_array_type):  Check for stub domain type
+	using TYPE_FLAG_STUB, not its length.
+	* gdbtypes.c (create_set_type):  Handle a stub domain type.
+
+	* ch-exp.y:  Get rid of some extra non-terminals, and move
+	their rules into primitive_value.
+	* parser-defs.h:  Add comment about unary postfix operators.
+	* ch-lang.c (chill_op_print_tab):  Add '->', postfix and prefix.
+	* expprint.c (print_subexp):  Recognize unary postfix operator.
+
+Wed Sep 14 18:27:42 1994  Jason Molenda  (crash@phydeaux.cygnus.com)
+
+        * remote-hms.c: use remote_debug instead of hms_silent toggle.
+        Add warnings about depreciation of `snoop' cmd.
+
+Wed Sep 14 18:18:58 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
+
+	* remote-hms.c (hms_read_inferior_memory):  Cope when
+	target sends both \r and \n.
+
+Wed Sep 14 17:14:57 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* remote-mips.c (mips_error): Place NORETURN macro correctly.
+	* TODO: Add item about START_INFERIOR_TRAPS_EXPECTED.
+
+Wed Sep 14 14:26:21 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* xcoffread.c (read_xcoff_symtab): Fix obsolete comment about
+	mst_solib_trampoline.
+
+	* f-valprint.c (f_val_print): Change cast of valaddr from
+	CORE_ADDR * to char **, since that is how it is used.
+
+	* dbxread.c (read_dbx_dynamic_symtab): Save copy of symbol names
+	using obsavestring, and pass that to prim_record_minimal_symbol.
+	Having the objfile point to bfd_asymbol_name directly doesn't work
+	if we save and restore a mapped symbol file.
+
+start-sanitize-gdbtk
+Wed Sep 14 00:55:26 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* gdbtk.tcl:  Add ref counts to breakpoint tags.
+	* Put quotes around function name in disassemble command to better
+	handle assembler names containing `.'.
+	* Make pclist element 0 be filler to avoid off-by-one problem with
+	line numbers.
+	* Set names of top-level windows.
+	* Add register display window.
+	* Add PC to label of assembly window.
+end-sanitize-gdbtk
+
+Tue Sep 13 18:23:26 1994  Rob Savoye  (rob@darkstar.cygnus.com)
+
+	* w89k-rom.c, op50-rom.c, monitor.c, config/pa/hppapro.mt: New files
+	to add a generic ROM monitor interface, and support file for the
+	WinBond W89K and the Oki OP50N PA based target boards.
+
+start-sanitize-gdbtk
+Tue Sep 13 08:59:04 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* gdbtk.c (gdbtk_flush gdbtk_fputs):  Buffer up output to make
+	disassembly more efficient.
+	* (breakpoint_notify):  Include pc in gdbtk_tcl_breakpoint
+	callback.
+	* (gdb_loc):  Include pc in return value.  Also, return function
+	name if arg was specified.
+	* (gdb_cmd_stub):  Call gdb_flush to drain internal GDB buffers
+	after command completes.
+	* (gdbtk_init):  Improve error handling.
+
+	* gdbtk.tcl:  Add lots of comments.  Clean up code.
+	* (gdbtk_tcl_fputs):  Make output window redirectable.
+	* Add assembly window, and breapoint support.
+	* Make button 1 in margin toggle breakpoints.
+	* Use stippling to indicate breakpoint disabling.
+end-sanitize-gdbtk
+
+Sun Sep 11 22:34:57 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* config/pa/tm-hppa.h (REGISTER_NAMES): Use r26-r23 for arg0-arg3.
+
+Sun Sep 11 04:36:47 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* irix5-nat.c, osfsolib.c, solib.c (solib_add):  Simplify last
+	change by replacing `symbols_added' with `so_last'.
+	* mdebugread.c (parse_external, parse_partial_symbols):  Ignore
+	global common symbols, they will be resolved by the runtime loader.
+	* mdebugread.c (parse_symbol, parse_partial_symbols, cross_ref):
+	Handle scSCommon like scCommon symbols.
+
+Sat Sep 10 01:43:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* corelow.c (add_solib_stub):  Copy to_sections changes from
+	core_ops to current_target after adding the shared libraries.
+	* partial-stab.h (N_EXCL), dbxread.c (add_old_header_file,
+	find_corresponding_bincl_psymtab):  Change `repeated header not seen'
+	error to a complaint, simplify complaint.
+	* procfs.c (signalname, errnoname):  Make `name' const.
+	* symfile.c (reread_symbols):  Use filename from old BFD to
+	reopen the objfile.
+	* values.c (record_latest_value):  Don't record value in the
+	history chain until we are sure there won't be an error.
+
+Fri Sep  9 15:52:09 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* nlm/Makefile.in: remove MMALLOC, READLINE, TERMCAP, and other
+	  cruft.
+
+	* config/i386/gdbserve.mt: New file, defs for i386 nlm stub.
+
+Thu Sep  8 17:14:43 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
+
+	* remote.c (fromhex): Make error more explicit.
+	(read_frame): Don't print bad checksum information unless
+	remote_debugging.  Don't use repeat count unless it's > 0.
+	* remote-e7000.c (expect): When echoing, ignore multiple newlines.
+	(e7000_insert_breakpoint, e7000_remove_breakpoint, target_ops):
+	Optionally cope with BC style breakpoints.  
+	(e7000_command):  After command send directly to the E7000 mark
+	registers as changed. 
+	(why_stop, e7000_wait: Understand BC style stop condition.
+	* sh-tdep.c (sh_skip_prologue):  Understand more complicated
+	sequences.  (frame_find_saved_regs): Likewise.
+	* config/h8500/tm-h8500.h (target_write_pc, TARGET_WRITE_PC):
+	Handle extra arg.
+	* config/i386/xm-go32.h (GDBINIT_FILENAME): Set to gdb.ini.
+	(more work here to come)
+	* config/sh/tm-sh.h (EXTRA_FRAME_INFO): Add f_offset and leaf_function
+	fields.
+
+Thu Sep  8 16:15:34 1994  J.T. Conklin  (jtc@rtl.cygnus.com)
+
+	* sparclite/Makefile.in: Assorted stuff needed for eload.
+
+	* sparclite/eload.c: Merge in command line argument parsing and
+	  error message handling improvements orignally made to aload.c.
+
+Wed Sep  7 23:24:50 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* defs.h (enum misc_command_type, command_control_type): Enums
+	for describing the command and control types.
+	(struct command_line): Add new fields to keep track of the command
+	type and body associated with the command.
+	* top.c: Include value.h.  Delete whitespace at the end of lines.
+	(build_command_line, get_command_line): New functions.
+	(execute_control_command, while_command, if_command): Likewise.
+	(realloc_body_list, read_next_line): Likewise.
+	(recurse_read_control_structure): Likewise.
+	(execute_user_command): Call execute_control_command.
+	(read_command_lines): Simplify by calling read_next_line, call
+	read_control_structure for "if" and "while" commands.
+	(free_command_lines): Free new fields in the command structure.
+	(define_command): Reset control_level to zero.
+	(init_main): Install command handlers for "if" and "while" commands.
+
+Tue Sep  6 16:24:07 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	 * c-typeprint.c (c_type_print_varspec_prefix,
+	 c_type_print_varspec_suffix): Add cases for Fortran type codes.
+	 * eval.c (evaluate_subexp): For OP_ARRAY expressions in Fortran,
+	 call f77_value_literal_string instead.
+	 * f_exp.y: Include <string.h>, move include of parser-defs.h.
+	 (parse_number): Translate 'd' floats to 'e' so atof() works. 
+	 (yylex): Remove unused variables.
+	 * f-lang.c: Include <string.h>.
+	 (get_bf_for_fcn): Remove unused variable.
+	 * f-typeprint.c (f_type_print_varspec_prefix,
+	 f_type_print_varspec_suffix): Remove unused
+	 variables, add cases to switch statements.
+	 (f_type_print_base): Remove unused variables.
+	 * f-valprint.c (gdbcore.h, command.h): Include.
+	 (f77_get_dynamic_lowerbound, f77_get_dynamic_upperbound):
+	 Call read_memory_integer with correct number of arguments.
+	 (f77_get_dynamic_upperbound): Call f77_get_dynamic_lowerbound
+	 with correct argument type.
+	 (f77_print_array): Removed unused array array_size_array.
+	 (f_val_print): Don't use a CORE_ADDR as a char *.
+	 * valops.c (value_cast): Handle COMPLEX and BOOL types.
+	 (value_assign): Handle Fortran literal string and complex values.
+	 (f77_cast_into_complex, f77_assign_from_literal_string,
+	 f77_assign_from_literal_complex): New functions.
+
+Mon Sep  5 14:46:41 1994  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	* ch-typeprint.c (chill_type_print_base):  Make TYPE_CODE_RANGE
+	case more robust.
+
+Sun Sep  4 16:06:34 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* i960-tdep.c (signal.h): Don't include.
+
+	* cxux-nat.c (target_is_m88110): Remove definition.
+
+	* configure.in (config/nm-empty.h): If cross only, use instead
+	of config/nm-trash.h.
+	* config/nm-trash.h: Remove.
+	* config/nm-empty.h: New file.
+	* config/i386/nm-m3.h: New file, includes config/nm-m3.h.
+	* config/mips/nm-m3.h: New file, includes config/nm-m3.h.
+	* config/m68k/nm-sysv4.h: New file, includes config/nm-sysv4.h.
+	* config/mips/nm-sysv4.h: New file, includes config/nm-sysv4.h.
+	* config/sparc/nm-sysv4.h: New file, includes config/nm-sysv4.h.
+
+start-sanitize-gdbtk
+Fri Sep  2 19:11:40 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* configure.in: Don't symlink to gdbtk.tcl if it's already there.
+end-sanitize-gdbtk
+
+Fri Sep  2 17:35:55 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* configure.in: No longer look for nm, tm, and xm headers in
+	  config/<header>; they are always in config/<cpu>/<header>.
+
+Fri Sep  2 16:40:03 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* objfiles.c (allocate_objfile): Add the newly-created objfile to
+	the end of the list of objfiles, instead of at the beginning.
+
+	* xcoffread.c (allocate_include_entry): New function, abstracted
+	from code in record_include_begin.
+	(record_include_begin, record_include_end): Call it.
+
+	* blockframe.c (reinit_frame_cache): Test inferior_pid instead of
+	target_has_stack to decide whether to create a real stack frame
+	for the cache.
+
+	* coffread.c (process_coff_symbol) [CXUX_TARGET]: Ignore vendor
+	section.
+	* config/m88k/tm-cxux.h (CXUX_TARGET): Define.
+
+	* h8300-tdep.c: Include "dis-asm.h" instead of <dis-asm.h>.
+
+Fri Sep  2 09:51:46 1994  J.T. Conklin  (jtc@cygnus.com)
+
+	* config/sparc/tm-nbsd.h: Add #defines to map NetBSD struct and
+	  field names into what is expected by sparc-nat.c.
+
+Thu Sep  1 17:32:54 1994  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	* c-typeprint.c (c_typedef_print):  Add missing Chill support.
+
+Thu Sep  1 15:41:21 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* rs6000-pinsn.c (print_insn):  Use powerpc disassembler when
+	doing Power PC.
+	* config/powerpc/tm-ppc-nw.h:  Define GDB_TARGET_POWERPC.
+
+	* config/i386/i386lynx.mh, config/m68k/m68klynx.mh,
+	config/rs6000/rs6000lynx.mh, config/sparc/sparclynx.mh:  Enable
+	ser-tcp.
+
+	* nlm/Makefile.in:  Get rid of NWSOURCE.
+	* nlm/alpha-io.S (inVti, outVti):  Remove extraneous ldha's.
+	* nlm/gdbserve.o:  Add dummy __main routine.
+	* nlm/gdbserve.def:  Turn on debug.
+
+Thu Sep  1 12:36:39 1994  Jim Kingdon  (kingdon@cygnus.com)
+
+	* config/xm-nbsd.h: Don't define SET_STACK_LIMIT_HUGE; it is obsolete.
+
+Thu Sep  1 11:01:40 1994  J.T. Conklin  (jtc@rtl.cygnus.com)
+
+	* config/tm-nbsd.h: New file, support for all NetBSD targets.
+	* config/xm-nbsd.h: fix typo.
+	* config/sparc/{nm,tm,xm}-nbsd.h: New files, renamed from
+	  {nm,tm,xm}-sparcnbsd.h to conform to prefered file naming
+	  conventions.
+	* configure.in: (sparc-*-netbsd): use config/sparc/nbsd.m[ht].
+
+Wed Aug 31 14:40:33 1994  Jason Molenda (crash@phydeaux.cygnus.com)
+
+	* remote-udi.c (udi_read_inferior_memory,udi_write_inferior_memory): 
+	change typeo in error msg (`inferrior' -> `inferior').
+
+Wed Aug 31 09:17:02 1994  Jim Kingdon  (kingdon@cygnus.com)
+
+	* inflow.c (set_sigint_trap, clear_sigint_trap): Check for
+	attach_flag (this check was performed by the callers).  Also check
+	inferior_thisrun_terminal.
+	* inftarg.c (child_wait), lynx-nat.c (child_wait),
+	procfs.c (wait_fd), symm-nat.c (child_wait): Don't check
+	attach_flag in deciding whether to call set_sigint_trap and
+	clear_sigint_trap. 
+
+	* value.h (struct value): Change literal_data from PTR to char *,
+	since that is the way it is used.
+
+Tue Aug 30 21:56:54 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* somread.c (som_symfile_read): Force unwinds to be re-read after
+	reading in a new partial symbol table.
+
+Tue Aug 30 13:14:16 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* config/h8500/tm-8500.h (DONT_USE_REMOTE): Remove definition,
+	an obsolete conditional.
+	* config/pa/tm-hppa.h (BREAKPOINT) [KERNELDEBUG]: Remove use,
+	an obsolete conditional.
+	* config/rs6000/rs6000.mh, config/rs6000/rs6000.mt: Clean up
+	comments.
+
+Mon Aug 29 14:39:42 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* Makefile.in (ns32k-opcode.h): Remove reference.
+	(ns32k-pinsn.o): Update dependencies.
+	* ns32k-opcode.h: Remove file.
+	* ns32k-pinsn.c (print_insn): Call version in libopcodes, remove
+	all other code in this file. 
+
+Mon Aug 29 12:04:07 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* nlm/configure.in:  Stop using cpu.c.  Put it in TDEPFILES instead.
+	* config/alpha/gdbserve.mt (TDEPFILES):  Remove alpha-patch.o.
+
+	* nlm/Makefile.in:  Add rule for .S.o.
+	* nlm/aio.h:  Protect from multiple inclusions.
+	* nlm/alpha-io.S:  Remove everything we don't need.
+	* nlm/{alpha-patch.c, alpha-patch.h, alpha-uart.c, alpha-uart.h}:
+	Remove, no longer needed.
+	* nlm/alpha.c:  Merge in lots of stuff from previous files.
+	* nlm/alpha.h:  Don't #include alpha-patch.h.  Make
+	breakpoint_insn extern.
+	* Move stuff from alpha-patch.h into here.
+
+	* config/alpha/gdbserve.mt (TDEPFILES):  Get rid of alpha-uart.o.
+
+Mon Aug 29 11:34:34 1994  Jim Kingdon  (kingdon@cygnus.com)
+
+	* annotate.c (annotate_starting): Flush output.
+
+Sat Aug 27 23:32:43 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* symfile.c (symbol_file_add):  Move reinit_frame_cache call to
+	the callers of symbol_file_add. Gets rid of heuristic fence-post
+	warnings on mips and alpha targets when the PC resides in a shared
+	library which is not yet read in.
+	* coff-solib.c (coff_solib_add), cxux-nat.c (add_shared_symbol_files),
+	irix5-nat.c (solib_add), osfsolib.c (solib_add),
+	remote-vx.c (vx_open), solib.c (solib_add):
+	Add call to reinit_frame_cache after all shared libraries are read in.
+	* remote-udi.c (udi_load), remote-vx.c (vx_load_command),
+	symfile.c (symbol_file_command, add_symbol_file_command):
+	Add call to reinit_frame_cache after symbol_file_add.
+
+Wed Aug 24 17:45:14 1994  J.T. Conklin  (jtc@cygnus.com)
+
+	* config/xm-nbsd.h: New file, support for all NetBSD ports.
+	* config/sparc/{nm-sparcnbsd.h,tm-sparcnbsd.h,xm-sparcnbsd.h,
+	  sparcnbsd.mh,sparcnbsd.mt}: New files, support for NetBSD/sparc.
+	* configure.in: Add sparc-*-netbsd target.
+
+Wed Aug 24 13:17:34 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* remote-vx.c (vx_attach): Interpret the command argument as an
+	unsigned long.
+
+Wed Aug 24 13:08:08 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
+
+	* configure.in: Change i[34]86 to i[345]86.
+	* nlm/configure.in: Likewise.
+	* gdbserver/configure.in: Likewise.
+
+Wed Aug 24 09:41:09 1994  J.T. Conklin  (jtc@cygnus.com)
+
+	* configure.in (i386-*-netware): Automatically configure nlm
+	  subdir.
+
+Tue Aug 23 17:51:13 1994  J.T. Conklin  (jtc@cygnus.com)
+
+	* nlm/gdbserve.c: conditionalize header file inclusion for either
+	  NetWare 4.0 or PIN targets.
+	* nlm/i386.c: include appropriate header files.
+	* nlm/prelude.c: define TERMINATE_BY_UNLOAD for NetWare 4.0
+	  targets.
+
+Tue Aug 23 16:54:16 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* nlm/ppc.c (set_step_traps clear_step_traps):  Cleanups.
+	* nlm/gdbserve.def:  Autoload clib.
+
+Tue Aug 23 12:05:19 1994  Jim Kingdon  (kingdon@cygnus.com)
+
+	* breakpoint.c (condition_command): Call breakpoints_changed.
+
+	* gdbtypes.h: Declare f77_create_literal_string_type and
+	f77_create_literal_complex_type.
+	* valops.c (f77_value_literal_string, f77_value_substring,
+	f77_value_literal_complex): Use xmalloc not malloc.
+	* valops.c (f77_value_literal_string, f77_value_substring):
+	Make addr char * not CORE_ADDR.
+	* value.h (struct value): Add new field literal_data of aligner union.
+	(VALUE_LITERAL_DATA): Use it.
+	* f-lang.h: Declare find_common_for_function.
+	* value.h, valops.c: Split VALUE_SUBSTRING_START into memaddr and
+	myaddr fields of a union.  Don't overload it with the frame field
+	(not sure this is necessary; I'm not sure what lval_* codes
+	VALUE_SUBSTRING_* can be used with).
+
+Mon Aug 22 11:45:01 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* config/a29k/{a29k-kern.mt,a29k-udi.mt,a29k.mt,ultra3.mh,
+	ultra3.mt}: Clean up comments, remove no-longer-used definitions.
+
+	* rs6000-nat.c: Include libbfd.h again, needed until reference
+	to bfd_cache_lookup is cleaned out.
+
+	* config/i386/linux.mh (XM_CLIBS): Add -lm.
+
+Mon Aug 22 10:42:15 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
+
+	Work to reduce the interrupts-off duration when running in DOS.
+	* ser-go32.c:  (dos_async_ready): See if anything is in the buffer.
+	(dos_async_rx): rewrite to unpack as many characters from the
+	asynctsr as possible into a local buffer.
+	
+Fri Aug 19 14:55:45 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	Initial Fortran language support, adapted from work by Farooq Butt
+	(fmbutt@engage.sps.mot.com).
+	* Makefile.in: Add Fortran-related files and dependencies.
+	* defs.h (language_fortran): New language enum.
+	* language.h (_LANG_fortran): Define.
+	(MAX_FORTRAN_DIMS): Define.
+	* expression.h: Reformat to standard.
+	(MULTI_F77_SUBSCRIPT, OP_F77_UNDETERMINED_ARGLIST,
+	OP_F77_LITERAL_COMPLEX, OP_F77_SUBSTR): New expression opcodes.
+	* gdbtypes.h (TYPE_CODE_COMPLEX, TYPE_CODE_LITERAL_COMPLEX,
+	TYPE_CODE_LITERAL_STRING): New type codes.
+	(type): New fields upper_bound_type and lower_bound_type.
+	(TYPE_ARRAY_UPPER_BOUND_TYPE, TYPE_ARRAY_LOWER_BOUND_TYPE,
+	TYPE_ARRAY_UPPER_BOUND_VALUE, TYPE_ARRAY_LOWER_BOUND_VALUE): New
+	macros.
+	(builtin_type_f_character, etc): Declare.
+	* value.h (VALUE_LITERAL_DATA, VALUE_SUBSTRING_START): Define.
+	* f-exp.y: New file, Fortran expression grammar.
+	* f-lang.c: New file, Fortran language support functions.
+	* f-lang.h: New file, Fortran language support declarations.
+	* f-typeprint.c: New file, Fortran type printing.
+	* f-valprint.c: New file, Fortran value printing.
+	* eval.c (evaluate_subexp): Add code for new expression opcodes,
+	fix wording of error message.
+	* gdbtypes.c (f77_create_literal_complex_type,
+	f77_create_literal_string_type): New functions.
+	* language.c (set_language_command): Add Fortran info.
+	(calc_f77_array_dims): New function.
+	* parse.c (length_of_subexp, prefixify_subexp): Add cases for new
+	expression opcodes.
+	* symfile.c (deduce_language_from_filename): Recognize .f and .F
+	as Fortran source files.
+	* valops.c (f77_value_literal_string, f77_value_substring,
+	f77_value_literal_complex): New functions.
+
+Fri Aug 19 13:35:01 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* c-typeprint.c (c_print_type):  Assume demangled arguments
+	if a '(' is found in varstring, looking for ')' at the end of
+	varstring did fail with demangled const member functions, which
+	have a trailing `const'.
+	* remote.c (get_offsets, putpkt):  Change to `char' buffers,
+	to avoid errors when compiling with DEC c89.
+	(remote_wait):  Cast to `char *' before passing buffer to
+	fputs_filtered, to avoid errors when compiling with DEC c89.
+	(remote_wait):  Do not return inferior_pid by default, this
+	statement is never reached, which causes warnings from some
+	compilers.
+	* stabsread.c (scan_file_globals):  Ignore static minimal symbols.
+	* symfile.c (load_command):  If called with no argument, try
+	to get the filename from the executable file.
+	(generic_load):  Remove check for NULL filename, it is done
+	in load_command now.
+
+Fri Aug 19 10:36:15 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* Makefile.in (ALLDEPFILES): Add hpread.c.
+	(hpread.o): Add dependencies.
+
+	* somread.c: Do not include "aout/aout64.h".  SOM has nothing to
+	do with a.out.
+	(BYTES_IN_WORD): Delete.
+	(som_symfile_read): Call hpread_build_psymtabs to build any
+	minimal symbols based on the HP C native debug symbols.
+	(som_symfile_finish): Call hpread_symfile_finish.
+	(som_symfile_init): Call hpread_symfile_init.
+	* config/pa/tm-hppa.h (HPREAD_ADJUST_STACK_ADDRESS): Define.
+	* hppa-tdep.c (hpread_adjust_stack_address): New function.
+
+	* config/pa/hppabsd.mh (NATDEPFILES): Add hpread.o
+	* config/pa/hppahpux.mh (NATDEPFILES): Likewise.
+	* hpread.c: New file.
+
+Fri Aug 19 00:40:55 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (skip_trampoline_code): Revert incorrect change
+	from June 2, 1994 (what was I thinking?!?).  Fix it right this
+	time.
+
+Thu Aug 18 17:01:35 1994  J.T. Conklin  (jtc@rtl.cygnus.com)
+
+	* nlm/i386.c, nlm/i386.h: New files that contain i386 specific code.
+
+Thu Aug 18 14:39:46 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* README: Grammar improvements, clarifications, updates.
+
+Wed Aug 17 23:08:53 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* Makefile.in (TARGET_FLAGS_TO_PASS):  Pass down LD_FOR_TARGET and
+	NLMCONV_FOR_TARGET.  (SUBDIRS):  Add nlm target.
+	* configure.in (powerpc-*-netware*):  Automatically configure nlm
+	subdir.
+	* nlm/Makefile.in:  Add {CC NLMCONV LD}_FOR_TARGET.  Remove alpha
+	specific stuff.  Make things more configurable.
+	* nlm/configure.in:  Add powerpc-*-netware* target.  Use
+	gdbserve.mt/cpu.c/cpu.h for target stuff.  Get rid of tm/xm/nm.h
+	files.
+	* nlm/gdbserve.c:  Move Alpha specific stuff into other files.
+	Remove lots of architecture-specific stuff.
+	* nlm/gdbserve.def:  Add new imports.
+	* nlm/ppc.c, nlm/ppc.h:  New files that contain PowerPC specific code.
+	* nlm/prelude.c:  Don't include libhooks.h, get rid of call to
+	register library.
+	* nlm/prelude.o:  What was this doing here?
+	* config/alpha/gdbserve.mt:  Defs for alpha nlm stub.
+	* config/powerpc/gdbserve.mt: Defs for PowerPC nlm stub.
+	* config/powerpc/ppc-nw.mt:  Defs for PowerPC target for GDB.
+	* config/powerpc/tm-ppc-nw.h:  Ditto.
+
+	* nlmstub.def:  New file, contains imports for 386 nlm stub.
+
+Wed Aug 17 23:17:33 1994  Rob Savoye  (rob@darkstar.cygnus.com)
+
+	* remote-pa.c: New file for HPPA embedded support. Currently it's
+	a copy of remote.c.
+	* config/pa/hppabsd.mt,hppahpux.mt,hppaosf.mt: User remote-pa.c.
+
+Wed Aug 17 13:19:52 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* config/m68k/tm-delta68.h (EXTRACT_RETURN_VALUE,
+	STORE_RETURN_VALUE): Define to use %a0 for pointers.
+
+Wed Aug 17 07:43:06 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* remote-mips.c: Remove unused declaration of mips_load.
+
+Tue Aug 16 16:45:34 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* coffread.c: General cleanup, and support for section offsets.
+	(time.h, sys/types.h, libbfd.h): Don't include.
+	(cur_src_start_addr, cur_src_end_addr): Rename to
+	current_source_start_addr, current_source_end_addr.
+	(nlist_stream_global): Remove.
+	(nlist_bfd_global): New global variable.
+	(coff_symfile_read): Remove code that gets and uses fileno()
+	directly.
+	(read_coff_symtab, enter_linenos, process_coff_symbol): Add
+	section_offsets parameter, add text/data section offset to
+	appropriate symbols' values.
+	(read_one_sym): Use bfd_read instead of fread.
+	(init_stringtab, init_lineno): Change first parameter to a bfd,
+	use bfd routines instead of raw I/O.
+
+Tue Aug 16 15:24:03 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* symtab.c (decode_line_1): If funfirstline and we get a
+	non-LOC_BLOCK symbol (e.g. variable or type), then error().
+
+	* Makefile.in (TARFILES, NONSRC, SFILES_STAND, SFILES_KGDB):
+	Remove; unused.
+	(TAGFILES_NO_SRCDIR): Remove ALLPARAM.
+	(HFILES_NO_SRCDIR): Remove all files in config sub-directory.
+	(TAGS): Also pass result of find on config sub-directory to etags.
+	(ALLPARAM): Remove; now unused.
+
+Sun Aug 14 13:05:26 1994  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (VERSION):  Bump to 4.13.1
+	* NEWS, README:  Update to match gdb 4.13 release version.
+
+Sat Aug 13 08:22:50 1994  Fred Fish  (fnf@cygnus.com)
+
+	Harris CX/UX support, from Bob Rusk (rrusk@mail.csd.harris.com).
+	* cxux-nat.c:  Remove dangling #else block.
+	(m88k_harris_core_register_addr):  New function.
+
+	* environ.c (init_environ):  If no environment, do nothing.
+
+Fri Aug 12 19:30:53 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hpread.c: Delete rest of TODO list.  Do not include "libbfd.h",
+	<time.h>, <sys/types.h>, "demangle.h", <sys/file.h>,
+	"expression.h", "language.h", "gdbtypes.h", "demangleh".
+	Move all global variables into the private symbol table structure
+	and add accessor macros.  Update some comments.
+	(hpread_build_psymtabs): Delete dbsubc_addr, we don't need it.
+	(hpread_end_psymtab): New function to end a partial symbol table,
+	all callers changed (no more bogus sharing with dbxread.c).
+
+Fri Aug 12 15:52:37 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* remote.c (remote_wait):  Return inferior_pid instead of 0 for
+	`W` message.
+
+Fri Aug 12 11:47:10 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* sparclite/aload.c (sys_error, error): Use vfprintf for variable
+	  argument lists.
+
+Thu Aug 11 04:06:42 1994  Doug Evans  (dje@canuck.cygnus.com)
+
+	* defs.h (concat, basename, buildargv, freeargv, strerrno, strsigno,
+	errno_max, signo_max, strtoerrno, strtosigno):  Delete.
+	Include "libiberty.h" instead.
+
+Wed Aug 10 13:23:47 1994  Rick Sladkey  (jrs@world.std.com)
+
+	* i386v-nat.c (i386_insert_nonaligned_watchpoint):
+	add additional argument specifying raw address to permit
+	proper release of debug registers.
+	(i386_insert_watchpoint, i386_insert_aligned_watchpoint):
+	change all callers.
+
+Wed Aug 10 16:13:45 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* defs.h, top.c:  Use `extern' in declarations of GUI hooks, and
+	define them in top.c.  Add comments to the hooks.
+
+Wed Aug 10 15:57:43 1994  Doug Evans  (dje@canuck.cygnus.com)
+
+	* remote-sim.c (gdbsim_ops): Set `to_insert_breakpoint' and
+	`to_remove_breakpoint' fields.
+
+Wed Aug 10 15:46:03 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* infcmd.c (run_command): Remove comment suggesting using
+	target_has_execution instead of inferior_pid.
+
+Wed Aug 10 10:33:20 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* remote-mips.c (mips_open): add code to handle baud rate.
+
+Tue Aug  9 09:44:42 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* infrun.c (wait_for_inferior):  Call target_resume() upon
+	detection of new processes.
+
+	* procfs.c (create_procinfo):  Return pointer to new procinfo
+	structure.
+	* (do_detach):  Spacing & formatting cleanup.
+	* (procfs_wait):  Move wait_again label to ensure that we really
+	wait again.  On exit from fork, release new child from gdbs'
+	clutches.
+	* (procfs_set_sproc_trap):  Enable trapping of fork and vfork.
+
+Mon Aug 08 15:34:13 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hpread.c (hpread_process_one_debug_symbol): Fix block scoping
+	problem (losing localvars on the close-brace instead of after
+	the close brace).
+
+Mon Aug  8 15:09:32 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* i386-nlmstub.c (handle_exception): Wait until the thread has
+	  been started before killing the NLM by pointing the PC at
+	  _exit().
+
+Sat Aug  6 22:27:30 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* config/mips/tm-irix5.h (IN_SIGTRAMP):  Redefine for Irix 5,
+	Irix 5 has a standard _sigtramp signal handler.
+	* irix5-nat.c (solib_add):  Get rid of sigtramp_address handling,
+	it is not needed for a standard _sigtramp signal handler.
+	Add shared library sections to the section table of the target
+	before adding the symbols.
+	* mips-tdep.c (mips_skip_prologue):  Do not skip load immediate
+	instructions that do not prepare a stack adjustment.
+	* regex.c (SIGN_EXTEND_CHAR):  Update to emacs-19.25 definition,
+	which does the right thing on machines where `char' is unsigned.
+
+Fri Aug  5 17:50:59 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* remote.c (remote_open):  Move setting of inferior_pid prior to
+	call to remote_start_remote.  Also use unique value for pid to
+	avoid confusion with read_register_pid & friends.
+	* (remote_wait):  Return inferior_pid instead of 0 in all cases.
+
+Fri Aug  5 12:23:02 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* dwarfread.c (bfd.h): Don't include.
+
+Fri Aug  5 09:08:34 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* i386-nlmstub.c (handle_exception): Point the PC at _exit() to
+	  kill the program being debugged.  KillMe(), the undocumented
+	  call intended for this purpose, causes the server to hang.
+
+Thu Aug  4 16:26:06 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
+
+	* remote.c (read_frame): Calculate run length encoded checksum
+	correctly.
+	* config/sh/stub.c: New file.
+
+Thu Aug  4 14:34:12 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* target.c (find_default_run_target):  Make sure to_can_run is set
+	before calling it.
+
+Thu Aug  4 11:46:27 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* TODO: Remove note about fast watchpoints and remove obsolete
+	Mach stuff.
+
+Thu Aug  4 11:08:03 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* config/i386/xm-i386v4.h, config/m68k/xm-m68kv4.h,
+	config/sparc/xm-sun4sol2.h (NORETURN): Don't define.
+	* config/m88k/tm-cxux.h (ARCH_NUM_REGS): Undefine before defining.
+
+Thu Aug  4 10:26:36 1994  Stu Grossman  (grossman@rtl.cygnus.com)
+
+	* target.c (add_target):  Don't call clean_target on target
+	vectors anymore.
+	* (unpush_target):  Test for to_close being set before calling.
+	* (target_xfer_memory, target_info):  Check for to_has_memory
+	before playing with memory.
+
+	* remote.c (remote_open):  Set inferior_pid to make kill command
+	happy.
+	* inflow.c (kill_command):  Revert change of Aug 2.  Use
+	inferior_pid to determine whether to print out "The program is not
+	being run." message.
+
+Thu Aug  4 07:55:04 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/i386/i386m3.mh (NAT_CLIBS): Add -lmachid and -lnetname.
+	* m3-nat.c, config/nm-m3.h: #if 0 REQUEST_QUIT stuff.
+	* m3-nat.c: Pass argument to return_to_top_level.
+	Declare m3_kill_inferior before use.
+	(port_chain_insert): In "can't happen" case, abort rather than
+	setting `mid' to large decimal constant (which gcc warns about).
+	(get_thread_name): Use cast to convert const char * to char *.
+	(add_mach_specific_commands): #if 0 "thread break" command.
+	(m3_trace_him): Call push_target.
+	(mach_really_wait): New argument pid; remove unused
+	variable pid.
+	(intercept_exec_calls): Call target_terminal_init and
+	target_terminal_inferior once the child execs.
+	* infrun.c (proceed): Pass argument to PREPARE_TO_PROCEED.
+
+Wed Aug  3 22:41:13 1994  Tom Lord  (lord@x1.cygnus.com)
+
+	* procfs.c (procfs_mourn_inferior): don't dereference the
+	procinfo pointer after it has been freed.
+
+Wed Aug  3 12:05:13 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* breakpoint.c (breakpoint_1): Improve pluralization in display
+	of breakpoint hit counts.
+
+	* language.h (struct language_defn): Remove unused field
+	la_longest_float.
+	(longest_float): Remove, no longer used.
+	* language.c (unknown_language_defn, auto_language_defn,
+	local_language_defn): Remove init of la_longest_float field.
+	* c-lang.c (c_language_defn, cplus_language_defn,
+	asm_language_defn): Ditto.
+	* ch-lang.c (chill_language_defn): Ditto.
+	* m2-lang.c (m2_language_defn): Ditto.
+
+Tue Aug  2 10:58:34 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* defs.h (bfd_read, bfd_seek): Remove declarations.
+	* os9kread.c, rs6000-nat.c (libbfd.h): Don't include.
+
+Tue Aug  2 09:50:50 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* inflow.c (kill_command): Fix a bug which prevented target
+	  programs to be killed.
+
+Mon Aug  1 18:48:47 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* defs.h: Change two-line declarations to one-line form.
+	(NORETURN): Define as "volatile" only for older GCCs.
+	(ATTR_NORETURN): Define for newer GCCs.
+	* procfs.c (proc_init_failed): Add ATTR_NORETURN to declaration.
+
+Mon Aug  1 16:43:24 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* breakpoint.c (mention), main.c (fputs_unfiltered): Add comments.
+	* breakpoint.c (delete_breakpoint, enable_breakpoint,
+	disable_breakpoint): Don't call breakpoints_changed; it is now
+	called via the *_breakpoint_hook functions.
+	* annotate.c (_initialize_annotate, breakpoint_changed): New functions.
+
+Mon Aug  1 13:38:04 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* stabsread.c (read_type): Fix a bug in enum size calculation.
+
+Mon Aug  1 01:36:13 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (compare_unwind_entries): Add "const" to both
+	argument types to shut up GCC.
+
+	* hppa-tdep.c (saved_pc_after_call): If the saved PC is in a
+	linker stub, then return the address the stub will return to.
+	(frame_saved_pc): Correctly restart the search for the saved
+	pc when a linker stub is encountered.
+
+	* hppa-tdep.c (inst_saves_gr): Handle 16 and 8 bit instruction
+	register stores emitted by the version 9 HP compilers.
+	(inst_saves_fr): Relax test for a specific base register (%r1);
+	this avoids losing with the version 9 HP compilers.
+	(skip_prologue): Try to skip argument stores emitted by the HP
+	compilers.  It's not perfect, but it's better than before.
+
+Fri Jul 29 23:20:30 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* findvar.c (write_pc write_pc_pid):  Remove casts to long when
+	calling write_register_pid.
+	* (write_register_pid):  Add prototype.
+
+Fri Jul 29 21:56:23 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
+
+	* remote.c (read_frame):  Split readchar/checksum calculation into
+	two parts since evaluation order is undefined.
+
+Fri Jul 29 13:46:08 1994  Fred Fish  (fnf@cygnus.com)
+
+        From Kevin A. Buettner (kev@cujo.geg.mot.com).
+	* Makefile.in (coredep.o):  Add inferior.h as dependency.
+	* inflow.c:  Add F_SETOWN to list of defines to check
+	around code that uses F_SETOWN.
+
+Fri Jul 29 09:59:05 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): If using newlib,
+	  set the -L and -B directory prefixes so we can link with it.
+
+Thu Jul 28 14:37:36 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* Makefile.in (INSTALLED_LIBS, CLIBS, DEPFILES):  Add support for
+	--enable-xxx configure option by adding ENABLE_{CLIBS DEPFILES}
+	where appropriate.
+
+	* General hackery to support alternate user-interface.
+	* breakpoint.c (mention, delete_breakpoint, enable_breakpoint,
+	disable_breakpoint):  Call hooks for alternate user-interface.
+	* defs.h:  Add declarations for alternate user-interface hooks.
+	* main.c (main):  Add --nw (and --nowindows) options to disable
+	the GUI.
+	* (near call to command_loop):  Call command_loop_hook if set.
+	* (fputs_unfiltered):  Call fputs_unfiltered_hook if set.
+	* stack.c:  Call print_frame_info_listing_hook if set.
+	* top.c (gdb_init):  Initialize targets.c and utils.c prior to
+	other files to make sure that calls to error and warning will
+	work.  Call init_ui_hook after everything else.
+	* utils.c (query):  Call query_hook if set.
+	* (gdb_flush):  Call flush_hook if set.
+	* Change _initialize_utils to initialize_utils cuz we don't use
+	automatic initialization of utils.c anymore.
+
+start-sanitize-gdbtk
+	* Support for TK GUI.
+	* Makefile.in:  Add rule for gdbtk.o.
+	* configure.in:  Add support for --enable-gdbtk.
+	* gdbtk.c:  New file.  Contains support routines for TK interface.
+	* gdbtk.tcl:  New file.  Implements GUI policy.
+end-sanitize-gdbtk
+
+	* remote.c:  Get rid of #ifdef DONT_USE_REMOTE.  It's no longer
+	necessary.
+
+Thu Jul 28 14:52:01 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* Makefile.in (CC_FOR_TARGET, CXX_FOR_TARGET): Use newlib if it is
+	  there and we are using the gcc from the tree.
+	  (LD_FOR_TARGET): Look for ld in ../ld/ld.new.
+
+Thu Jul 28 10:43:36 1994  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (annotate.o):  Add dependencies.
+
+Wed Jul 27 14:34:42 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* sparclite/aload.c: Added new -q (quiet) option.
+	  return 0 exit status if file was successfully downloaded.
+
+	* nlm/gdbserve.c: merge in command line argument parsing changes
+	  and bug fixes made to i386-nlmstub.c.
+
+	* i386-nlmstub.c: The returnLength field must be initialized
+	  before portConfig is passed to AIOGetPortConfiguration.
+	  Compare command line arguments with strnicmp(); args are
+	  case insensitive on netware.
+
+Wed Jul 27 09:24:19 1994  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (DISTSTUFF):  Add definition.
+	(diststuff):  Add for new distribution support.
+	(gdb.tar.Z, make-proto-gdb.dir, setup-to-dist,
+	gdb-$(VERSION).tar.Z, make-proto-gdb-1, make-proto-testsuite.dir):
+	Remove old distribution building rules, now uses standard
+	distribution support in parent directory Makefile.in.
+
+Tue Jul 26 14:15:53 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* target.c (push_target): Cast result from xmalloc.
+
+Tue Jul 26 18:20:46 1994  Paul Flinders  (ptf@smee)
+
+	* elfread.c (elf_symtab_read): Discard compiler labels generated
+	by the Solaris 2.1/Intel SunPro compiler.
+
+Mon Jul 25 18:19:24 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* target.c (nomemory):  Fix prototype and routine to take correct
+	args.
+
+Mon Jul 25 15:38:23 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Makefile.in (clean): Remove libgdb-files.
+
+Mon Jul 25 11:50:57 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* coredep.c: Include inferior.h.
+
+Mon Jul 25 11:36:02 1994  J.T. Conklin  (jtc@phishhead.cygnus.com)
+
+	* i386-nlmstub.c: Add support for NODE, PORT and BAUD command
+	  line arguments.
+
+Sat Jul 23 14:36:09 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* symfile.c (deduce_language_from_filename): Recognize .S as asm,
+	.cp as C++, alphabetize better.
+
+	* breakpoint.c (ignore, condition): Move usage note into body of
+	help text, so first line can be one-line summary.
+
+Sat Jul 23 00:58:15 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* target.c (unpush_target):  Fix handling of removal of top target.
+
+Fri Jul 22 17:30:39 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* Makefile.in: Add stuff to build nlmstub.
+	* Add rule for annotate.o to keep Sun make happy.
+	* configure.in:  Add config for powerpc/Netware.
+
+	* partial-stab.h (near N_SO):  Don't call START_PSYMTAB with null
+	filename.  This speeds up handling of trailing N_SO stabs (they
+	mark the end of a .o file).
+
+	* target.c, target.h:  Change the way pushing and popping of
+	targets work to support target overlays and inheritance.
+	* corelow.c, hppa-tdep.c, inflow.c, remote-nindy.c, utils.c:
+	Fixup references to current_target, due to previous changes.
+
+	* config/i386/tm-i386nw.h:  Enable longjmp support.  More work is
+	needed to get the address of longjmp out of the target.
+
+Tue Jul 19 13:25:06 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* main.c: Include <ctype.h>.
+
+Mon Jul 18 15:32:17 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* remote-mips.c (mips_readchar): Fix a bug in checking <IDT>
+	prompt.
+
+Mon Jul 18 14:26:35 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* solib.c (look_for_base): Don't deref exec_bfd if NULL.
+
+Sun Jul 17 15:38:36 1994  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (VERSION):  Bump to 4.12.4.
+
+Sun Jul 17 12:20:35 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	Harris CX/UX support, from Bob Rusk (rrusk@mail.csd.harris.com).
+	* configure.in (m88*-harris-cxux*): New configuration.
+	* cxux-nat.c, config/m88k/cxux.mh, config/m88k/cxux.mt,
+	config/m88k/xm-cxux.h, config/m88k/tm-cxux.h, config/m88k/nm-cxux.h:
+	New files.
+	* config/m88k/tm-m88k.h: Add comment about Harris OS.
+	(TARGET_WRITE_PC): Pass pid through to register writers.
+
+	* configure.in (m68*): Put vendor-only-specified host configs
+	after vendor-and-os-specified configs.
+	(m68*-atari-sysv4*, m68*-cbm-sysv4*): Replace with m68*-*-sysv4.
+
+	* config/m88k/delta88.mh (MUNCH_DEFINE): Remove.
+	* config/m88k/delta88.mt, config/m88k/delta88v4.mh: Format
+	consistently.
+
+Sat Jul 16 23:39:17 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* elfread.c (elf_symtab_read):  Handle error return from
+	bfd_get_dynamic_symtab_upper_bound gracefully.
+
+Sat Jul 16 14:43:17 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* inferior.h (ARCH_NUM_REGS): New macro, actual number of
+	registers in use by the inferior.
+	* coredep.c (fetch_core_registers, register_addr): Use it.
+	* findvar.c (registers_changed, registers_fetched,
+	read_register_bytes): Ditto.
+	* infcmd.c (do_registers_info, registers_info): Ditto.
+	* infptrace.c (fetch_inferior_registers,
+	store_inferior_registers): Ditto.
+	* stack.c (frame_info): Ditto.
+
+	* coredep.c (CORE_REGISTER_ADDR): New macro.
+	(fetch_core_registers): Use it.
+
+	* breakpoint.c (ignore, condition): Add usage notes to help strings.
+	* symfile.c (add-symbol-file): Add usage note to help string.
+	(add_shared_symbol_files_command): New command.
+
+	gcc -Wall lint.
+	* inferior.h (read_pc_pid): Declare.
+	* breakpoint.c (watchpoint_check): Cache breakpoint in local
+	variable b, remove unused variable other_type_used.
+	* main.c (inferior.h, call-cmds.h): Include.
+	(gdb_init): Declare.
+	* remote.c (remote_wait): Return 0 by default.
+
+Fri Jul 15 16:43:33 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	Stop printing at null char option, from Oliver Meyer
+	(omeyer@i3.informatik.rwth-aachen.de).
+	* valprint.h, valprint.c (stop_print_at_null): New global.
+	* valprint.c (_initialize_valprint): New print set subcommand
+	"null-stop".
+	* c-valprint.c (c_val_print): If stop_print_at_null is on, and
+	printing a char	array, adjust the number of chars to print.
+
+Fri Jul 15 14:33:40 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+        From Kevin A. Buettner (kev@cujo.geg.mot.com).
+	* m88k-tdep.c (examine_prologue): Modified to handle prologues for
+	pic code in addition to prologues where an instruction from the
+	prologue gets moved into the delay slot of a branch instruction
+	immediately following the prologue.  A table of potential prologue
+	instructions (prologue_insn_tbl) is now used for picking apart a
+	function prologue.
+	(frame_find_saved_regs): Changed the way in which limit gets set
+	so that the delay slot of branch instructions immediately
+	following the prologue gets examined.
+	(pushed_size, store_parm_word, store_parm, push_parameters,
+	collect_returned_value):  Deleted.
+
+Fri Jul 15 01:06:00 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* infrun.c (wait_for_inferior):  Handle stepping into leaf
+	functions whose prologue consists of gp loading code only.
+
+Thu Jul 14 14:22:12 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* dbxread.c: Don't include libbfd.h.
+	* dwarfread.c, elfread.c somread.c: Don't include libbfd.h,
+	<time.h>, or <sys/types.h>.
+	* elfread.c (elf_symfile_read): Use only standard BFD functions to
+	collect information about the stab and stab string sections.
+
+Thu Jul 14 13:17:39 1994  Kung Hsu  (kung@x1.cygnus.com)
+
+	* stabsread.c (read_huge_number): handle large unsigned number
+	for stabs generated by os9k C compiler.
+
+Wed Jul 13 18:58:15 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	Breakpoint hit counts, from Bob Rusk (rrusk@mail.csd.harris.com).
+	* breakpoint.h (hit_count): New breakpoint field.
+	* breakpoint.c (show_breakpoint_hit_counts): New variable.
+	(clear_breakpoint_hit_counts): New function.
+	(bpstat_stop_status): Increment the hit count.
+	(breakpoint_1): Display the hit count.
+	* infcmd.c (run_command): Reset breakpoint hit counts.
+	* target.c (generic_mourn_inferior): Don't clear ignore counts if
+	displaying hit counts.
+	
+Tue Jul 12 12:23:15 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* elfread.c (elf_symfile_read):  Unconditionally add dynamic
+	symbols for all symbol files.  Makes skipping over the
+	trampoline code work when stepping from a function in a shared
+	library into a function in a different shared library for Irix 5.
+	Other ELF targets do not have enough information in their
+	dynamic symbol tables to make this work.
+	(elf_symtab_read):  Relocate mst_solib_trampoline address.
+
+Mon Jul 11 16:38:49 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	Atari support, from Uwe Seimet (seimet@chemie.uni-kl.de).
+	* configure.in (m68*-atari-sysv4*): New configuration.
+	(m68*-cbm-sysv4*): Use m68kv4 instead of amix.
+	* m68k-tdep.c (R_PS): Define as R_SR if necessary.
+	* config/m68k/m68kv4.mh, config/m68k/m68kv4.mt,
+	config/m68k/tm-m68kv4.h, config/m68k/xm-m68kv4.h: New files.
+	* config/m68k/amix.mh, config/m68k/amix.mt,
+	config/m68k/tm-amix.h, config/m68k/xm-amix.h: Removed, superseded
+	by m68kv4 files.
+
+Sat Jul  9 16:28:43 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* symtab.c (find_function_start_sal):  New function to find
+	the start of a function from a function symbol.
+	(decode_line_1, decode_line_2):  Use it instead of open coded
+	partial copies of the code.
+	(list_symbols):  Quote symbol name before passing it to
+	break_command to enable proper handling of mangled symbols.
+
+Wed Jul  6 20:22:07 1994  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	* ch-exp.y (match_simple_name_string):  Don't lower-case here.
+	* ch-exp.y (yylex):  First try name lookup using exact name
+	typed by user;  if that fails, try lower-cased name.
+
+Wed Jul 06 12:39:07 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hpread.c: More cleanups.  Delete lots of trailing whitespace.
+	Remove some items from the TODO list and notes throughout code
+	for things which need fixing.  Add more comments.
+	Document bogus struct symloc sharing with dbxread.c.  Delete more
+	useless variables.  Add more PARAM prototypes.  Fixup more
+	indention problems that have crept in.
+	(SET_NAMESTRING): Accept new namep and objfile arguments so that
+	it doesn't depend on the variable names on the procedures it's
+	used from.  
+	(hpread_symfile_init): Delete incorrect checks for bogus sizes of
+	the debug sections.
+
+Wed Jul  6 00:48:57 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* dbxread.c, elfread.c, mipsread.c, nlmread.c, os9kread.c:
+	Move "no debugging symbols found" test to symfile.c.
+	* symfile.c (syms_from_objfile, reread_symbols):  Add
+	"no debugging symbols found" test.
+	* coffread.c (init_stringtab):  Handle stripped files with a
+	stringtab offset of zero gracefully.
+	* osfsolib.c (solib_create_inferior_hook):  Use DYNAMIC flag from
+	BFD instead of stop_pc heuristic to determine if it is a dynamically
+	linked object file.
+	* procfs.c (wait_fd):  Handle ENOENT error return from PIOCWSTOP
+	ioctl, it indicates that the process has exited.
+
+Mon Jul 04 19:48:03 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hpread.c (hpread_symfile_init): Make sure to initialize all the
+	private data to zero.  Not having any HP C debug symbols is not an
+	error.  Just return.
+
+Mon Jul  4 19:28:56 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (read_unwind_info): ELF unwind information is in the
+	.PARISC.unwind section now.
+
+Mon Jul  4 17:06:26 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* breakpoint.c (mention): Always show breakpoint address if no
+	source file.
+
+Sat Jul  2 01:51:33 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* solib.c (bfd_lookup_symbol, look_for_base):  Reinstate to reenable
+	handling of shared libraries for non-ELF executables, but only if
+	HANDLE_SVR4_EXEC_EMULATORS is defined.
+	(locate_base):  Try to find debug_base in the dynamic linker
+	for non-ELF executables if HANDLE_SVR4_EXEC_EMULATORS is defined.
+	* config/sparc/tm-sun4sol2.h (HANDLE_SVR4_EXEC_EMULATORS):
+	Define to enable handling of shared libraries for a.out executables,
+	run under Solaris BCP.
+
+Fri Jul 01 19:50:21 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hpread.c: Change contribution notice to the Cygnus/Utah agreed
+	upon notice.  Delete some stuff from the TODO list.  Rework
+	many comments to be clearer.  Major cleanups.  Consistently
+	use "hpread_" prefix.  Delete unnecessary macros, structures
+	variables, fiels, functions and #if 0 code.  Mark code which
+	still needs to be cleaned up.  PARAMize and make most functions
+	static. Fix error checking when reading in the debug section
+	contents.  No more minimal symbol table handling in this code!
+
+Thu Jun 30 13:59:23 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* infrun.c (wait_for_inferior): Print "Program exited normally"
+	regardless of batch_mode.
+	* defs.h, top.c (batch_mode): Removed.
+
+Wed Jun 29 18:53:36 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* Makefile.in (dcache_h): Remove redundant definition.
+	(init.c): Add a comment.
+	(top.c): Remove explicit compile action.
+	* breakpoint.c (mention): Share code indicating location of
+	break/watchpoints, don't print address if addressprint is off.
+	* breakpoint.c, c-typeprint.c, c-valprint.c, energize.c, symtab.h
+	(demangle): Remove redundant declarations.
+	* eval.c: Remove redundant function declarations.
+	* objfiles.h: Cosmetic and grammatical improvements.
+	* TODO: Various updates.
+
+	* remote-mips.c: Replace all \r chars with \015.
+	(mips_receive_header): Display control characters readably.
+	(mips_xfer_memory): Add a simple progress display.
+
+Wed Jun 29 13:11:45 1994  Steve Chamberlain  (sac@cirdan.cygnus.com)
+
+	* remote-e7000.c (e7000_open): Don't try a tcp open if we're
+	using go32.
+	* remote-hms.c (flush): New function.
+	(expect): Get edge case right.
+	(hms_read_inferior_memory): Be more tolerant of line noise.
+
+Tue Jun 28 14:17:03 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* configure.in: Use i386m3.mh and i386m3.mt as names of host and
+	target files, not non-existent mach3.mh and mach3.mt.
+
+Wed Jun 29 00:26:17 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* dbxread.c (dbx_symfile_read):  Unconditionally add dynamic
+	symbols for all symbol files.  Makes skipping over the
+	trampoline code work when stepping from a function in a shared
+	library into a function in a different shared library.
+	(read_dbx_dynamic_symtab):  Relocate mst_solib_trampoline address.
+
+Tue Jun 28 15:28:01 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* dbxread.c, partial-stab.h (near N_SO):  SO stabs with blank
+	names mean end of .o file.
+	* infrun.c (wait_for_inferior):  Clean up multi-thread logic near
+	top of routine.  Handle new thread notification cleanly.
+	* lynx-nat.c (child_wait):  General cleanups, handle new LynxOS
+	thread notification scheme.
+	* (child_resume):  General cleanups, handle resumption of all
+	threads properly.
+
+Mon Jun 27 09:57:23 1994  Steve Chamberlain  (sac@cirdan.cygnus.com)
+
+	* ser-go32.c: Rewrite to run under windows.
+	* ser-e7kpc.c: New file to support the E7000 with the PC ISA
+	bus interface.
+	* serial.c (serial_open): Notice device "pc".
+	* remote-e7000.c: Fix copyright date.
+	(expect): Compare \n and \r the same.
+	(e7000_open): Allow pc as a serial port
+	* sh/sh.mt: Add ser-e7kpc.
+	* h8300/h8300hms.mt: Add ser-e7kpc.
+	* main.c (proc_wait): Don't wait if using go32.
+
+Mon Jun 27 00:35:51 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* somread.c: Simplify by using stabsect_build_psymtabs.
+	* dbxread.c (stabsect_build_psymtabs): New argument "text_name"
+	corresponding to the name of the text section.  All references
+	changed.
+	(somstab_build_psymtabs): Delete function, no longer needed.
+
+Sun Jun 26 23:54:08 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* somread.c: Renamed from paread.c.  Changed function names and
+	comments to reflect that this file deals with SOM (an object file
+	format), rather than the PA (a cpu).
+	(Makefile.in): Chaned appropriately.
+	(config/pa/hppabsd.mh, config/pa/hppahpux.mh): Likewise.
+	* dbxread.c (somstab_build_psymtabs): Renamed from
+	pastab_build_psymtabs.
+
+Fri Jun 24 08:15:42 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* core-sol2.c:  New file to handle ELF and BCP core file flavours.
+	* config/sparc/sun4sol2.mh (NATDEPFILES):  Use it instead of
+	core-svr4.
+	* Makefile.in:  Updated for core-sol2.c.
+	* README:  Add notes about SPARCworks cc under Solaris 2.x,
+	from Casper H.S. Dik (casper@fwi.uva.nl).
+	* config/mips/xm-makeva.h:  Removed, no longer necessary.
+	* Makefile.in, config/mips/xm-irix3.h, config/mips/xm-irix5.h,
+	config/mips/xm-mips.h, config/mips/xm-news-mips.h,
+	config/mips/xm-riscos.h:  Remove references to xm-makeva.h
+
+Wed Jun 22 17:48:21 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdba.el: Put program input and output in a separate buffer.
+
+Wed Jun 22 16:54:15 1994  Fred Fish  (fnf@cygnus.com)
+
+	* energize-patches, main.c (main), top.c (gdb_init, pwd_command),
+	top.h: Change all occurances of dirbuf to gdb_dirbuf.  Collides
+	with global variable of same name in libnsl.so on UnixWare.
+
+Wed Jun 22 14:40:52 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* symtab.c (decode_line_1): fix a bug in dealing with '<>'
+	embedded in template name.
+
+Tue Jun 21 14:06:46 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* config/i386/nm-linux.h: change calling convention of 
+	TARGET_CAN_USE_HARDWARE_WATCHPOINT() and
+	target_insert_watchpoint() and
+	target_remove_watchpoint().
+
+	* config/mips/tm-mips64.h: define FORCE_LONG_LONG to force LONGEST
+	to be long long in gdb.
+	* config/mips/tm-bigmips.h: ditto.
+
+Mon Jun 20 23:54:37 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* c-lang.c (asm_language_defn):  New definitions for language_asm,
+	mostly copied from c_language_defn, to avoid warnings when
+	switching between c and asm stack frames.
+
+Mon Jun 20 13:51:55 1994  Ian Lance Taylor  (ian@sanguine.cygnus.com)
+
+	* mdebugread.c (parse_symbol): Don't call ecoff_swap_tir_in or
+	ecoff_swap_rndx_in directly; use the debug_swap pointer instead.
+	(upgrade_type, handle_psymbol_enumerators): Likewise.
+	(has_opaque_xref, cross_ref): Likewise.
+	(elfmdebug_build_psymtabs): Call swap->read_debug_info to read
+	debugging information, rather than doing it here.
+	* mipsread.c (mipscoff_symfile_read): Call read_debug_info entry
+	point in ecoff_debug_swap backend structure, rather than calling
+	ecoff_slurp_symbolic_info directly.
+
+Fri Jun 17 20:58:58 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* breakpoint.c: Include annotate.h.  Call annotate_field rather
+	than printing annotation directly.
+
+	* main.c: Include string.h.
+
+Thu Jun 16 14:41:37 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* fork-child.c (startup_inferior) [STARTUP_INFERIOR]: If defined,
+	call it instead of doing normal loop.
+	* infcmd.c (attach_command): Don't call wait_for_inferior if
+	running	Mach 3.
+	* infrun.c (proceed) [PREPARE_TO_PROCEED]: If defined, call
+	hook that can decide whether to step over the next breakpoint.
+	* utils.c (wrap_here): Abort if wrap_buffer not allocated.
+	(request_quit) [REQUEST_QUIT]: If defined, call it instead of
+	doing normal quit.
+
+	* configure.in: Improve sorting/formatting of hosts and targets.
+	(i[34]86-*-mach3*, i[34]86-*-osf1mk*, mips-*-mach3*,
+	m88*-*-mach3*, ns32k-*-mach3*): Recognize.
+	* Makefile.in (stop-gdb): New target.
+	* stop-gdb.c: New file, utility to get attention of waiting GDBs
+	in Mach 3.
+
+Wed Jun 15 00:41:03 1994  Tom Lord  (lord@rtl.cygnus.com)
+
+	* top.c (gdb_init): Init current_directory in gdb_init.  Probably
+	the identical initialization can be deleted from main.c, but i
+	haven't done so just in case.
+
+Tue Jun 14 17:24:41 1994  Tom Lord  (lord@x1.cygnus.com)
+
+	* gdba.el: Added menu windows and slightly improved window
+	handling to gdba.el.  Fixed numerous minor bugs that were causing
+	emacs and gdb to fall out of sync.
+
+Tue Jun 14 16:18:44 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* breakpoint.c: annotate changes lost at merge, put back in.
+
+Mon Jun 13 17:28:50 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* config/i386/i386sco.mh, i386sco4.mh (XDEPFILES): Remove
+	i387-tdep.o.
+
+Sun Jun 12 03:51:52 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* config/m68k/dpx2.mh (NATDEPFILES):  Remove duplicate inclusion
+	of inftarg.o.
+	* config/m68k/tm-dpx2.h (CANNOT_STORE_REGISTER):  Define to inhibit
+	writing of floating registers, the dpx2 kernel disallows it.
+	* irix5-nat.c (LM_ADDR):  The loaded address of the shared library
+	is contained in o_praw.
+	* irix5-nat.c (solib_map_sections):  Adjust sections by the
+	difference between the loaded address and the prelinked address.
+	* irix5-nat.c (solib_address):  Use LM_ADDR for the loaded start
+	address.
+	* mdebugread.c (parse_symbol):  Do not relocate stEnd/scText
+	symbols, their value is absolute.
+	* mdebugread.c (parse_partial_symbols):  Handle Irix 5.2 shared
+	libraries fh->adr fields of zero. Relocate minimal symbol values
+	upon readin. Relocate non-stabs symbols upon readin.
+	* mdebugread.c (psymtab_to_symtab_1):  Use pst->textlow for the
+	start address of the outermost block.
+	* mdebugread.c (parse_lines, parse_procedure):  Pass in pst
+	instead of section_offsets and use relocated pst->textlow for
+	line number and procedure address relocations.
+
+	From gmo@MicroUnity.com (Guillermo A. Loyola):
+	* mdebugread.c (parse_symbol, parse_partial_symbols, cross_ref):
+	Handle SGI Irix5 stIndirect symbol type.
+
+Fri Jun 10 14:52:56 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* breakpoint.c: fix a syntax error native cc does not like.
+
+	* Makefile.in: change sparclite-tdep.c to sparcl-tdep.c.
+	* sparclite/Makefile.in: ditto.
+	* sparcl-tdpe.c: change file name because first 8 chars has to be 
+	unique.
+	* sparcl-stub.c: ditto.
+
+	* .Sanitize: add sparclite-stub.c sparclite-tdep.c to keep.
+
+	* sparclite/Makefile.in: fix INCLUDE_CFLAGS to have {srcdir}/../config.
+
+Fri Jun 10 10:38:15 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (target_read_pc, target_write_pc): Accept (and
+	ignore) a PID argument.
+	(hppa_pop_frame): Pass a PID to target_write_pc.
+	* config/pa/tm-hppa.h (TARGET_READ_PC, TARGET_WRITE_PC): Accept
+	and pass through a PID argument.
+	(target_read_pc, target_write_pc): Update prototypes.
+
+Thu Jun  9 18:10:44 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* Makefile.in: add new file sparclite-tdep.c.
+	* sparclite/Makefile.in: add new file sparclite-stub.c.
+	* sparclite/hw_breakpoint.note: note for SPARClite hardware breapoint
+	support.
+	* config/sparc/sparclite.mt: add sparclite-tdep.o.
+	* config/sparc/tm-sparclite.h: add hardware breakpoints support 
+	defiines and code.
+	* sparclite-tdep.c: new file, contains hardware breakpoint support
+	code.
+	* sparclite-stub.c: new file, stub code that add support hardware
+	breakpoint support.
+	* breakpoint.c: add hardware breakpoint support.
+	* breakpoint.h: add new breakpoint type to support hardware
+	breakpoint.
+	* config/mips/nm-irix4.h: change interface for target dependent
+	code supporting watch point.
+	* config/pa/nm-hppab.h: change interface for target dependent
+	code supporting watch point.
+
+Thu Jun  9 14:59:58 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* remote-os9k.c (rombuf_command): fix a bug accepting rombug
+	output.
+	* stabsread.c (read_struct_fields): os9k nested structure does not
+	have terminating ';', instead it just get to ',' and bit position
+	and length.
+
+Wed Jun  8 23:20:45 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* nlmread.c (nlm_symtab_read):  Clean up a bit.
+	* (nlm_symfile_read):  Record bounds of main() so that backtrace
+	command will know where to stop.
+	* objfiles.c (objfile_relocate):  Relocate entry point/func info
+	for backtrace as well.
+	* objfiles.h:  Define values for invalid PCs for entry point info.
+	* symfile.c (init_entry_point_info):  Initialize invalid values
+	with aforementioned macros.
+	* config/alpha/tm-alphanw.h:  Turn on FRAME_CHAIN_VALID_ALTERNATE
+	to cause backtrace to stop when it gets back to main().
+	* config/i386/tm-i386nw.h:  Ditto.
+
+Sat Jun  4 18:17:03 1994  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	Fix value_print, which used to be ostensibly language-independent,
+	but would print pointers and arrays in C syntax.  Instead, call
+	a language-specific function.
+	* language.h (struct language_defn):  New functional field
+	la_value_print.
+	(LA_VALUE_PRINT):  New macro.
+	* language.c (unk_lang_value_print):  New stub/dummy function.
+	(unknown_language_defn, auto_language_defn, local_language_defn):
+	Use it.
+	* c-valprint.c (c_value_print):  New function, with code moved from:
+	* valprint.c (value_print):  ... here.  Now just invoke
+	LA_VALUE_PRINT to do language-specific stuff.
+	* valprint.c (value_print_array_elements):  Make non-static.
+	* c-lang.c (c_language_defn, cplus_language_defn):  Add
+	c_value_print in the la_value_print field.
+	* m2-lang.c (m2_language_defn):  Likewise.
+	* ch-lang.c (chill_language_defn):  But here use chill_value_print.
+	* ch-valprint.c (chill_val_print):  Print null pointer as NULL.
+	* ch-valprint.c (chill_value_print):  New function, based on
+	c_value_print, but use Chill "look and feel."
+	* c-lang.h (c_value_print):  New prototype.
+	* ch-lang.h (chill_value_print):  New prototype.
+	* value.h (value_print_array_elements):  New prototype.
+
+	* ch-valprint.c (chill_val_print, case TYPE_CODE_BITSTRING
+	and case TYPE_CODE_SET):  Check that the element type isn't a stub.
+
+Fri Jun  3 09:15:00 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* main.c: Move entire file except for #ifndef MAIN_OVERRIDE code
+	to new file top.c.  Make things extern instead of static and
+	similar rearrangements to deal with this.
+	* top.h: New file.
+	* utils.c: Move fputs_unfiltered to main.c.  Remove 
+	FPUTS_UNFILTERED_OVERRIDE ifndef.
+	* Makefile.in: Change so that gdb uses main.c, utils.c, and top.c,
+	and libgdb uses utils.c and top.c.
+
+Thu Jun  2 23:19:10 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (skip_trampoline_code): Fix typo.
+
+Thu Jun  2 18:09:59 1994  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	* ch-valprint.c (chill_val_print_array_elements):  New function.
+	A Chill version of val_print_array_elements, it prints the
+	array index labels, in additions ot the array element values.
+	(chill_val_print):  Use the new function.
+
+Thu Jun  2 08:50:00 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* configure.in:  Add nlm subdir to configdirs for alpha-*-netware
+	target.
+	* defs.h (enum language):  Add language_asm.
+	* findvar.c (read_register_bytes read_register_gen
+	write_register_bytes read_register read_register_pid
+	write_register write_register_pid supply_register):  Move multi-
+	thread handling down into these routines.  Create XXX_pid routines
+	that allow register references to specify the pid.
+	* findvar.c infcmd.c (read_pc read_pc_pid write_pc write_pc_pid
+	read_sp write_sp read_fp write_fp):  Move these routines from
+	infcmd to findvar to centralize the whole mess.
+	* i386-nlmstub.c:  Portability fixes.
+	* infptrace.c (child_resume):  Conditionalize to allow other natives
+	to override it.  Remove PIDGET gubbish, it's no longer necessary.
+	* infrun.c (wait_for_inferior):  Put registers_changed() before
+	target_wait() to speed up remote debugging.
+	* Replace code that reads registers from other threads with much
+	nicer looking new function calls (see changes to findvar.c).
+	* Don't skip prologues if debugging assembly source.
+	* lynx-nat.c (child_resume):  Lynx now needs it's own version of
+	child_resume to handle multi-thread debugging properly.
+	* remote.c:  Add O response to get console output from target.
+	* (readchar): Add timeout parameter.  Handle SERIAL_EOF and
+	SERIAL_ERROR here to simplify callers.
+	* Change static var timeout to remote_timeout.
+	* (fromhex):  Remove unnecessary return -1 at end of routine.
+	* (remote_wait):  Turn this into a big switch statement.  Add
+	support for O response.
+	* (putpkt):  Remove unnecessary handling of SERIAL_EOF/ERROR.
+	* (getpkt):  Split getpkt into two parts.  read_frame deals with
+	all formatting issues, run-length encoding, and framing.  getpkt
+	now handles error recovery, and frame detection.
+	* ser-tcp.c (tcp_readchar):  Handle EINTR from read().
+	* ser-unix.c (hardwire_raw):  Set CLOCAL so that we ignore modem
+	control.  (hardwire_readchar):  Handle EINTR from read().
+	* symfile.c (deduce_language_from_filename):  Add support for .s
+	files.
+	* config/nm-lynx.h:  Define CHILD_WAIT so that lynx-nat.c can
+	override infptrace's child_wait.
+	* config/rs6000/rs6000lynx.mh:  Use xm-rs6000ly.h & nm-rs6000ly.h
+	instead of XXXlynx.h.
+	* config/rs6000/rs6000lynx.mt:  Use tm-rs6000ly.h instead of
+	tm-rs6000lynx.h.
+	* nlm/gdbserve.c:  Portability fixes.
+
+Tue May 31 20:35:44 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* inftarg.c (child_wait): Call proc_wait, not wait.
+	(child_mourn_inferior): Call proc_remove_foreign.
+	* main.c (gdb_init): Call init_proc.
+	* main.c: Provide dummy versions of init_proc, proc_wait, and
+	proc_remove_foreign for the gdb case (the libgdb case provides its
+	own versions of these functions).
+	* Makefile.in (libgdb-files): Add libproc.a.
+
+Wed Jun  1 11:08:52 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	Hardware watchpoints for Linux, from Rick Sladkey
+	(jrs@world.std.com).
+	* infrun.c (wait_for_inferior) [HAVE_CONTINUABLE_WATCHPOINT]: Add
+	new hardware breakpoint recovery method.
+	* i386v-nat.c (i386_insert_watchpoint,
+	i386_insert_nonaligned_watchpoint, i386_remove_watchpoint,
+	i386_stopped_by_watchpoint) [TARGET_CAN_USE_HARWARE_WATCHPOINT]:
+	New functions to support the 386 hardware debugging registers.
+	* config/i386/nm-linux.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT,
+	HAVE_CONTINUABLE_WATCHPOINT, STOPPED_BY_WATCHPOINT,
+	target_insert_watchpoint, target_remove_watchpoint): Define these
+	macros to use the hardware debugging functions in i386v-nat.c.
+
+Wed May 25 17:06:15 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Makefile.in: Replace libgdb.a with libgdb-files.  Make "all"
+	build it.
+
+Thu May 19 09:56:20 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* target.c, target.h: New variables target_activity_function and
+	target_activity_fd.
+	* inflow.c, inferior.h: New functions set_sigio_trap and
+	clear_sigio_trap.
+	* inftarg.c (child_wait), procfs.c (wait_fd): Call them.
+
+Wed May 18 13:01:55 1994  Doug Evans  (dje@canuck.cygnus.com)
+
+	* remote-sim.h (sim_verbose): Delete.
+	Document callbacks needed.
+	(sim_*): Change result to void where there isn't one.
+	(sim_open): Clarify argument and error response.
+	(sim_close): Declare.
+	(sim_load): Change bfd_handle argument to file name.  Clarify result.
+	(sim_create_inferior): Renamed from sim_set_args.
+	(sim_set_pc): Delete.
+	(sim_info): Delete printf_fn argument.
+	* remote-sim.c (gdbsim_kill): Add comment describing purpose.
+	(gdbsim_load): Try sim_load first.
+	(gdbsim_create_inferior): Call sim_create_inferior.
+	(gdbsim_open): Handle args == NULL.  Update call to sim_open.
+	(gdbsim_close): Call sim_close.
+	(gdbsim_files_info): Update call to sim_info.
+	(gdbsim_ops): Realign comments.
+
+	* printcmd.c (decode_format): Allow TARGET_PTR_BIT to be non-constant.
+
+Tue May 17 16:45:20 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* xcoffread.c (read_xcoff_symtab): For C_FILE symbols, only use
+	the auxent if the symbol's name is ".file".  From David Edelsohn 
+	<c1dje@watson.ibm.com>.
+
+Tue May 17 11:08:22 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* breakpoint.c (breakpoint_1): Fix typo.
+
+	* annotate.c (annotate_field_end): Fix typo.
+
+	* Makefile.in: Move annotate.o from COMMON_OBS to OBS.
+
+	* Makefile.in (TSSTART): Remove; no longer used.
+
+	* utils.c (vfprintf_maybe_filtered, vfprintf_unfiltered): Call
+	fputs_unfiltered and exit directly, rather than fatal.  The latter
+	calls vfprintf_unfiltered!
+
+	* gdbtypes.h, gdbtypes.c (can_dereference): New function.
+	* value.h, printcmd.c (print_value_flags): Move from here...
+	* annotate.c: ...to here, and make it use can_dereference.
+
+Sat May 14 15:13:52 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* inflow.c (job_control, attach_flag, generic_mourn_inferior):
+	Remove, needed for both native and cross.
+	* target.c (attach_flag, generic_mourn_inferior): Put here.
+	* utils.c (job_control): Put here.
+	(terminal.h): Don't include anymore.
+
+Sat May 14 09:11:44 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* source.c (find_source_lines): Always use code that was #ifdef
+	BROKEN_LARGE_ALLOCA.  Do the cleanup before returning, rather than
+	leaving it on the chain.  Reindent much of this function.
+	* config/sparc/{xm-sun4sol2.h,xm-sun4os4.h},
+	config/i386/{xm-sun386.h,xm-i386m3.h,xm-i386mach.h},
+	config/m68k/{sun3os4.h,xm-news.h,xm-hp300hpux.h},
+	config/ns32k/xm-ns32km3.h: Remove all references to
+	BROKEN_LARGE_ALLOCA; with the above change it is no longer needed.
+	* main.c, fork-child.c, many config files: Remove all
+	SET_STACK_LIMIT_HUGE code; with the above changes it should no
+	longer be needed.
+
+	* symtab.c (lookup_partial_symbol): Use if and abort, not assert.
+	This avoids __eprintf troubles.
+
+Fri May 13 08:10:21 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* main.c (main): Surround in #ifndef MAIN_OVERRIDE.  Move
+	initialization code which needs to be called even if we bypass the
+	command line stuff into gdb_init.
+	* utils.c (fputs_unfiltered): Surround in #ifndef
+	FPUTS_UNFILTERED_OVERRIDE.
+	* Makefile.in (libgdb.a): New target.
+
+	* utils.c: Rearrange I/O stuff a bit so that all output goes
+	through fputs_unfiltered.  Use vasprintf; removes arbitrary limit
+	which made %s not work with arbitrarily large strings.
+	* printcmd.c (printf_command): Use printf_filtered, not
+	printf_unfiltered and printf, now that arbitrary limit is gone.
+
+	gcc -Wall lint:
+	* breakpoint.c (watchpoint_check): Remove unused variable b.
+	* stack.c (print_frame_info): Move sp and buf inside #if.
+	* eval.c (evaluate_subexp): Remove unused variables pp,
+	mangle_ptr, ptr, and mangle_tstr.
+	* valarith.c (value_x_binop): Remove unused variables mangle_tstr
+	and mangle_ptr.
+	* symtab.c (lookup_symtab): Put variable copy inside #if.
+	(decode_line_1): Put variable q1 inside #if 0.
+	* target.h: Declare target_link.
+	* infrun.c (wait_for_inferior): Remove unused variables signame.
+	* remote.c (remote_resume): Remove unused variable name.
+	* c-exp.y (parse_number): Parenthesize operand of shift.
+	* dbxread.c (record_minimal_symbol): Parenthesize operand of &&
+	(this is a semantic change, the warning seems to have detected a bug).
+	* dbxread.c (end_psymtab): Move variable p1 inside #if.
+	* coffread.c: Move variable temptype inside #if.
+	* ch-typeprint.c (chill_type_print_base): Remove unused variable
+	name.
+	* ch-valprint.c: #include typeprint.h and ch-lang.h.
+	(chill_val_print): Remove unused variable in_range.
+	(chill_val_print): Remove statement "length > TYPE_LENGTH (type);".
+	(chill_val_print): Add default case for switch.
+	* stabsread.h: Declare stabsect_build_psymtabs.
+	* os9kread.c (read_minimal_symbols): Make this return void.
+	(os9k_symfile_read): Remove unused variables stb_exist and val.
+	(os9k_symfile_init): Remove unused variable val.
+	(fill_sym): Remove unused variable id.
+	(read_os9k_psymtab): Put variable back_to inside #if 0.  Remove
+	unused variable nsl.
+	Remove unused variable symfile_bfd.
+	#if 0 unused variables lbrac_unmatched_complaint and
+	lbrac_mismatch_complaint.
+	Remove declaration for non-existent function os9k_next_symbol_text.
+
+	* annotate.c, annotate.h: New files, containing a function for
+	each annotation which outputs it.
+	* Move breakpoints_changed from breakpoint.c to annotate.c.
+	* breakpoint.c, blockframe.c, infrun.c, cp-valprint.c, main.c,
+	printcmd.c, source.c, stack.c, utils.c, valprint.c:
+	Use annotate.c functions to output annotations.
+	* Makefile.in (OBS): Add annotate.o.
+
+Thu May 12 10:46:27 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (read_unwind_info): Make sure elf_unwind_size and
+	elf_unwind_entries are always initialized.
+
+	* hppa-tdep.c (skip_trampoline_code): Handle argument relocation
+	stubs which return directly to the caller rather than to the stub
+	itself.
+
+Wed May 11 20:11:51 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* c-exp.y (yyerror): Display a more informative error message.
+	* ch-exp.y (yyerror): Ditto, don't use global yychar.
+	* m2-exp.y (yyerror): Ditto.
+
+Tue May 10 11:57:53 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* inflow.c (job_control): Move definition to front of file.
+
+Tue May 10 14:42:37 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+	* maint.c (print_section_table): Rename SEC_SHARED_LIBRARY to
+	SEC_COFF_SHARED_LIBRARY to match corresponding change in bfd.
+
+Fri May  6 13:30:22 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* Makefile.in (kdb): Remove old init.c creation commands.
+	* configure.in (sparclite): Match on sparclite*.
+	* sparclite/aload.c (main): Only change section addresses for
+	a.out format object files.
+
+Fri May  6 13:24:04 1994  Steve Chamberlain  (sac@cygnus.com)
+
+	* config/i386/go32.mh: Define CC.
+
+Fri May  6 11:56:54 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* gdbserver/Makefile.in: Remove irrelevant definitions and
+	comments inherited from the gdb Makefile.
+	(BFD_DIR, BFD, BFD_SRC, BFD_CFLAGS): Add from gdb Makefile.
+	(VERSION): Update to 4.12.3.
+	(gdbserver): Remove any existing executable first.
+	(distclean, realclean): Remove nm.h.
+	* gdbserver/low-lynx.c: Add Sparc Lynx support.
+	* gdbserver/low-sparc.c, gdbserver/low-sun3.c (sys/wait.h):
+	Don't use absolute pathname.
+
+Thu May  5 12:00:22 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* rs6000-nat.c (vmap_ldinfo): Don't fail if fstat returns an
+	error.
+
+Wed May  4 06:56:03 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* infrun.c (proceed, normal_stop, wait_for_inferior), breakpoint.c
+	(print_it_normal): Add annotations for the inferior starting and
+	stopping, and for all the various messages related to how it
+	stopped.
+
+	* printcmd.c (do_one_display): Annotate.
+	* stack.c (print_frame_info): Annotate printing of stack frames.
+
+Wed May  4 18:15:51 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* remote.c (get_offsets):  Handle case where stub doesn't support
+	qOffsets message.
+
+Wed May  4 15:30:39 1994  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	Add partial support for g++ code compiled with -fvtable-thunks.
+	* c-valprint.c (c_val_print):  Add vtblprint support
+	when using thunks.
+	* cp-valprint.c (cp_is_vtbl_member):  A vtable can be an array of
+	pointers (if using thunks) as well as array of structs (otherwise).
+	* cp-valprint.c (vtbl_ptr_name_old, vtbl_ptr_name):  Move to global
+	level, and make the latter non-static (so define_symbol can use it).
+	* stabsread.c (define_symbol):  If the type being defined is a
+	pointer type named "__vtbl_ptr_type", set the TYPE_NAME to that name.
+	* symtab.h (VTBL_PREFIX_P):  Allow "_VT" as well as "_vt".
+	* values.c (value_virtual_fn_field):  Handle thunks.
+	* values.c (value_headof):  Minor efficiency hack.
+	* values.c (value_headof):   Incomplete thunk support.  FIXME.
+
+Wed May  4 06:56:03 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* valprint.c (print_longest): Clarify comment about use_local.
+	* printcmd.c, defs.h (print_address_numeric), callers in
+	symmisc.c, symfile.c, stack.c, source.c, remote.c, infcmd.c,
+	cp-valprint.c, core.c, ch-valprint.c, c-valprint.c, breakpoint.c,
+	exec.c: New argument use_local.
+	* source.c (identify_source_line): Use filtered output.  Use
+	print_address_numeric. 
+
+	* core.c (memory_error), symtab.c (cplusplus_hint, decode_line_1),
+	language.c (type_error, range_error): Use filtered output.
+	* utils.c (error_begin): Update comment to tell people to use
+	filtered output.
+
+	* Makefile.in (HFILES_WITH_SRCDIR): List bfd.h.
+	(HFILES_NO_SRCDIR): List gdbcore.h not gdbcore_h, so as not to get
+	bfd.h.
+
+Tue May  3 07:41:33 1994  Jim Kingdon  (kingdon@cygnus.com)
+
+	* procfs.c (procfs_wait): Reinstate code which deduces the signal
+	from the fault, #ifndef FAULTED_USE_SIGINFO.
+	* config/sparc/tm-sun4sol2.h: Define FAULTED_USE_SIGINFO.
+
+Fri Apr 29 18:15:04 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* breakpoint.c (breakpoint_1): Annotate each field of the headers.
+	Explicitly annotate each record.
+
+Fri Apr 29 15:56:18 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* xcoffexec.c: Reformat to standards and lint.
+	(language.h): Include.
+	(exec_close): Declare arg "quitting".
+	(file_command): Declare arg "from_tty".
+	(map_vmap): Cast xmalloc result to PTR.
+	* rs6000-nat.c: Reformat to standards and lint.
+	(exec_one_dummy_insn): Use char array for saved instruction.
+	(fixup_breakpoints): Declare.
+	(vmap_ldinfo): Be more informative in fatal error messages.
+	(xcoff_relocate_symtab): Define to return void.
+	* xcoffsolib.h: Reformat to standards, improve comments.
+	* config/rs6000/nm-rs6000.h (xcoff_relocate_symtab): Declare.
+
+Thu Apr 28 08:40:56 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* utils.c, defs.h (error_begin): New function.
+	(quit): Print annotation before printing the error message.
+	* main.c (return_to_top_level): Print annotation before doing the
+	longjmp.
+	* symtab.c (decode_line_1): Call error not warning and then
+	return_to_top_level.  Call error_begin and printf_unfiltered
+	rather calling warning (before calls to return_to_top_level).
+	* core.c (memory_error): Use error_begin, printf_unfiltered,
+	print_address_numeric and return_to_top_level instead of error.
+	Cleans up a FIXME-32x64.
+	* language.c (type_error, range_error): Call error_begin
+	not just target_terminal_ours.
+
+	* dbxread.c (stabsect_build_psymtabs): Assign to sym_stab_info
+	directly, rather than via DBX_SYMFILE_INFO.  A cast on the left
+	side of an assignment is non-portable.
+
+	* utils.c (query): Change syntax of query annotations to be
+	consistent with other input annotations.
+	(prompt_for_continue): Likewise for prompt-for-continue annotation.
+
+Thu Apr 28 01:20:39 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mdebugread.c (psymtab_to_symtab_1):  Do not call sort_blocks
+	for stabs symtabs.
+	* mips-tdep.c (mips_skip_prologue):  Handle prologues for functions
+	that have a stack frame size of 32k or larger (from Paul Flinders).
+	Remove #if 0'd code.
+
+Wed Apr 27 16:33:51 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* lynx-nat.c (CANNOT_STORE_REGISTER): Add a fallback definition
+	for Lynx platforms that need it.
+	* config/nm-lynx.h (__LYNXOS): Define if not already defined.
+
+Wed Apr 27 16:01:37 1994  Jim Kingdon  (kingdon@cygnus.com)
+
+	* procfs.c (procfs_wait): Use the signal from the pr_info rather
+	than trying to deduce it from the fault.
+
+Wed Apr 27 12:22:46 1994  Steve Chamberlain  (sac@cygnus.com)
+
+	* printcmd.c (print_address_symbolic): Initialize name to empty
+	string to avoid core dump if lookup fails.
+	* remote-e7000.c (printf_e7000debug): Error if target not open.
+
+Tue Apr 26 22:45:24 1994  Stu Grossman  (grossman at cygnus.com)
+
+	* i386-nlmstub.c:  Update to be more in line with PIN stub.
+	* nlm/gdbserve.c (putDebugChar):  Install bug fix from i386-nlmstub.
+	* (hex2mem):  Init ptr.
+	* General cleanups to use ConsolePrintf, standard prologues, etc...
+
+Tue Apr 26 10:23:04 1994  Stu Grossman  (grossman at cygnus.com)
+
+	* i386-nlmstub.c:  More changes to be compatible with remote.c.
+
+	* dbxread.c:  Move a bunch of strncmps out of process_one_symbol
+	into (the far less frequently called) dbx_symfile_read.
+
+	* i386-nlmstub.c:  An interim version till we get PIN for the x86.
+
+Tue Apr 26 09:50:45 1994  Stu Grossman  (grossman at cygnus.com)
+
+	* dbxread.c (record_minimal_symbol):  Record the section
+	associated with the symbol to make dynmaic relocation work.
+	* (dbx_symfile_read, process_one_symbol):  Fixes to work around
+	Solaris brain-damage which don't apply to relocatable object
+	files.
+	* (stabsect_build_psymtabs):  New routine to read stabs out of an
+	arbitrarily named section.
+	* nlmread.c (nlm_symtab_read):  Read ALL syms from the NLM, not just
+	globals.
+	* (nlm_symfile_read):  Call stabsect_build_psymtabs to read the
+	stabs out of the nlm.
+	* partial-stabs.h (cases 'f' & 'F'):  Fixes to work around Solaris
+	brain-damage which don't apply to relocatable object files.
+	* remote.c (putpkt):  Improve error reporting and error handling.
+	* (get_offsets):  Temporary kludge to force data & bss sections to
+	have the same relocation.
+	* stabsread.c (define_symbol, scan_file_globals):  Record section
+	info in sym.
+
+Sat Apr 23 19:05:52 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* breakpoint.c (breakpoint_1): Annotate each field of output.  Add
+	FIXME-32x64 comment.
+
+Fri Apr 22 16:43:54 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* infrun.c (wait_for_inferior): Move call to flush_cached_frames
+	to after call to target_wait.  This means that flush_cached_frames
+	can call target_terminal_ours if it wants to.
+	* infrun.c (wait_for_inferior) [HAVE_NONSTEPPABLE_WATCHPOINT]: Add
+	comment about why the code is dubious.
+
+	* stabsread.c (read_type): Call read_type, not nonexistent
+	os9k_read_type.
+
+Fri Apr 22 14:25:36 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* remote-os9k.c (rombug_fetch_registers): set trace mode
+	correctly.
+	* remote-os9k.c (rombug_read_inferior_memory): cache data in
+	buffer.
+	* os9kread,c (read_os9k_psymtab): process file symbol to truncate
+	extra info.
+	* os9kread.c (os9k_read_ofile_symtab): proper casting of args
+	passed to process_one_symbol.
+	* stabsread.c (read_type): process os9k functio prototype.
+
+Fri Apr 22 11:27:39 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* solib.c (symbol_add_stub): If so->textsection is NULL, don't
+	dump core.
+
+Thu Apr 21 07:45:49 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* utils.c (prompt_for_continue): Annotate prompt.
+	(query): Annotate query.
+	* printcmd.c (print_frame_args): Change syntax of argument
+	annotation to make name and value part of a single group of
+	annotations, not two separate groups.
+	* cp-valprint.c (cp_print_value_fields): Likewise for fields.
+	* valprint.c (val_print_array_elements): Change syntax of
+	annotation to be more concise.
+	* main.c, defs.h (command_line_input): New argument tells what
+	string to include in the annotations.
+	* symtab.c (decode_line_2), main.c (read_command_lines,
+	command_loop): Change callers.
+
+	* breakpoint.c (watch_command): Use (CORE_ADDR)0, not NULL, for
+	target null pointer.
+	* blockframe.c (find_frame_addr_in_frame_chain): Likewise.
+
+	* printcmd.c (output_command): Annotate things we print here too.
+	* printcmd.c (print_command_1): Add "value-history-value" annotation.
+	* Move declaration of print_value_flags from defs.h to value.h.
+	* main.c (command_line_input): Call wrap_here as well as gdb_flush.
+
+Thu Apr 21 09:29:37 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* dbxread.c (read_dbx_dynamic_symtab):  Reinstall support for sun3,
+	BFD handles sun3 dynamic relocations now.
+	* elfread.c (elf_symtab_read, elf_symfile_read):  Handle dynamic
+	symbol table.
+
+Wed Apr 20 19:41:21 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* printcmd.c (print_command_1): Annotate the top-level expressions
+	that we print.
+	(print_frame_args): Annotate each argument.
+	* printcmd.c, defs.h (print_value_flags): New function.
+	* cp-valprint.c (cp_print_value_fields): Annotate each field.
+	* valprint.c (val_print_array_elements): Annotate each array element.
+
+Wed Apr 20 13:18:41 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* findvar.c (read_var_value):  Handle LOC_REPARM_ADDR case correctly,
+	the register contains a pointer to the type, not the type itself.
+
+Mon Apr 11 10:44:35 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* main.c (main): Accept --annotate=N option and make --fullname
+	the same as --annotate=1.
+	(command_line_input): Print annotatation before and after prompt.
+	* blockframe.c (flush_cached_frames): Print annotation.
+	* Rename frame_file_full_name to annotation_level and move it from
+	symtab.h to defs.h.
+	* source.c (identify_source_line): If annotation_level > 1,
+	change output format.
+	* breakpoint.c: Print annotation whenever a breakpoint changes.
+	* main.c: New variable server_command.
+	(command_line_input): Parse "server " and set server_command.
+	(dont_repeat): Check server_command.
+
+Wed Apr 20 08:37:16 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* xcoffread.c (xcoff_next_symbol_text): Don't return before
+	updating raw_symbol and symnum.  Return a value in the case where
+	we complained.
+
+	* dstread.c, coffread.c: Don't define pending_blocks; buildsym.c
+	takes care of it.
+	* parse.c: Don't define block_found; it is defined in symtab.c.
+	* parser-defs.h: Add comment regarding block_found.
+
+Tue Apr 19 09:46:05 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (internalize_unwind_info): Delete unused indexp
+	argument.
+
+Mon Apr 18 13:18:56 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* dbxread.c (read_dbx_dynamic_symtab):  Relocate BFD symbols by
+	section vma. Do not read dynamic relocs for sun3 executables to
+	avoid BFD assertion message.
+
+Mon Apr 18 10:08:07 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* nm-hppab.h (KERNEL_U_ADDR): Define.
+	(FIVE_ARG_PTRACE): Likewise.
+	(CANNOT_STORE_REGISTER): Likewise.
+	* nm-hppah.h (KERNEL_U_ADDR): Define.
+	(FIVE_ARG_PTRACE): Likewise.
+	(CANNOT_STORE_REGISTER): Likewise.
+	(NEED_TEXT_START_END): Likewise.
+
+	* tm-hppah.h (NEED_TEXT_START_END): Delete definition.
+	* xm-hppah.h (KERNEL_U_ADDR): Delete definition.
+	(FIVE_ARG_PTRACE): Likewise.
+	* xm-hppab.h (KERNEL_U_ADDR): Delete definition.
+	(FIVE_ARG_PTRACE): Likewise.
+
+	* hppa-tdep.c (read_unwind_info): Make static.
+	(restore_pc_queue): Indirect through the target vector to
+	reload the register state.
+
+Sat Apr 16 22:20:51 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* paread.c (compare_unwind_entries): Delete function.  It's been
+	moved into hppa-tdep.c.
+	(read_unwind_info): Likewise.
+	(pa_symfile_read): No longer call read_unwind_info.  The unwind
+	tables will be read in as they are needed.
+
+	* hppa-tdep.c (compare_unwind_entries): New function.
+	(read_unwind_info, internalize_unwinds): Likewise.
+	(find_unwind_entry): Read in unwind information on demand.
+
+Fri Apr 15 11:53:46 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* source.c (DIRNAME_SEPARATOR): New macro, replaces all references
+	to : in search path processing.
+	* defs.h (qsort): Rename argument in prototype.
+	* symtab.h (SAYMBOL_VALUE): Rename value field, avoids bugs in
+	some compilers.
+	* breakpoint.c, exec.c, mdebugread.c, mipsread.c, xcoffexec.c
+	(false): Eliminate usages.
+
+Fri Apr 15 11:35:19 1994  Steve Chamberlain  (sac@cygnus.com)
+
+	* h8500-tdep.c (initialize_h8500_tdep, large_command):
+	All references to value changed to value_ptrlage_command is now
+	called big_command.
+	All references to value changed to value_ptr.
+	* remote-e7000.c (e7000_wait): Use target_waitstatus and SETSTOP
+	* remote-hms.c (hms_wait): Timeout after five seconds.
+	* ser-go32.c (dosasync_read): Poll if timeout < 0.
+	* config/tm/tm-h8500.h (BEFORE_MAIN_LOOP_HOOK): Deleted.
+	* config/sh/tm-sh.h (BREAKPOINT): Is now sleep opcode.
+
+Thu Apr 14 07:01:56 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* procfs.c (procfs_wait): Protect watchpoint code with appropriate
+	#ifdefs.
+	(procfs_set_watchpoint, procfs_stopped_by_watchpoint): Likewise.
+
+Wed Apr 13 14:52:46 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* breakpoint.h (enum bptype): Add bp_hardware_watchpoint and
+	bp_watchpoint_scope breakpoints.
+	(struct breakpoint): Add val_chain and related_breakpoint fields
+	for use by watchpoints.
+
+	* breakpoint.c (within_scope): Delete.  No longer used.
+	(TARGET_CAN_USE_HARDWARE_WATCHPOINT): Provide default definition.
+	(target_{remove,insert}_watchpoint): Likewise.
+	(can_use_hardware_watchpoint): New function.
+	(remove_breakpoint): New function to remove a single breakpoint
+	or hardware watchpoint.
+	(insert_breakpoints): Handle insertion of hardware watchpoints.
+	Store a copy of the value chain derived from the watchpoint
+	expression.
+	(remove_breakpoints): Simplify by using remove_breakpoint.
+	(delete_breakpoint): Likewise.
+	(watchpoint_check): Delete the watchpoint and watchpoint scope
+	breakpoints when the watchpoint goes out of scope.  Save & restore
+	the current frame after checking watchpoints.
+	(breakpoint_init_inferior): Likewise (restarting the program
+	makes all local watchpoints go out of scope).
+	(bpstat_stop_status): Handle hardware watchpoints much like normal
+	watchpoints. Delete the watchpoint and watchpoint scope breakpoint
+	when the watchpoint goes out of scope.  Remove and reinsert all
+	breakpoints before returning if we stopped when a hardware watchpoint
+	fired.
+	(watch_command): Use a hardware watchpoint when possible.  If
+	watching a local expression, build a scope breakpoint too.
+	(map_breakpoint_numbers): Also call given function for any
+	related breakpoints.
+	(disable_breakpoint): Never disable a scope breakpoint.
+	(enable_breakpoint): Handle hardware breakpoints much like normal
+	breakpoints, but recompute the watchpoint_scope breakpoint's
+	frame and address  (if we have an associated scope breakpoint).
+	(read_memory_nobpt): Handle hardware watchpoints like normal 
+	watchpoints.  When necessary handle watchpoint_scope breakpoints.
+	(print_it_normal, bpstat_what, breakpoint_1, mention): Likewise.
+	(clear_command, breakpoint_re_set_one, enable_command): Likewise.
+	(disable_command): Likewise.
+
+	* blockframe.c (find_frame_addr_in_frame_chain): New function.
+	Extern prototype added to frame.h
+
+	* infrun.c (wait_for_inferior): Set current_frame and select
+	a frame before checking if we stopped due to a hardare watchpoint
+	firing.  Handle stepping over hardware watchpoints.
+	(normal_stop): Remove unnecessary call to select_frame.
+
+	* value.h (value_release_to_mark): Declare.
+	* values.c (value_release_to_mark): New function.
+
+	* procfs.c (procfs_wait): Add cases for hardware watchpoints.
+	(procfs_set_watchpoint, procfs_stopped_by_watchpoint): New functions.
+
+	* hppab-nat.c (hppa_set_watchpoint): New function.
+
+	* config/pa/nm-hppab.h (STOPPED_BY_WATCHPOINT): Define.
+	(HAVE_STEPPABLE_WATCHPOINT): Define.
+	(TARGET_CAN_USE_HARDWARE_WATCHPOINT): Define.
+	(target_{insert,delete}_watchpoint): Define.
+
+	* config/mips/nm-irix4.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT): Define.
+	(STOPPED_BY_WATCHPOINT, HAVE_NONSTEPPABLE_WATCHPOINT): Likewise.
+	(target_{insert,remove}_watchpoint): Likewise.
+
+Mon Apr 11 19:21:27 1994  Stu Grossman  (grossman at cygnus.com)
+
+	* xcoffread.c (read_xcoff_symtab):  Ignore symbols of class C_EXT,
+	smtyp XTY_LD, sclass XMC_DS (external data segment label).  They
+	often have the same names as debug symbols for functions, and
+	confuse lookup_symbol().
+
+Mon Apr 11 10:44:35 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* remote.c: Around redefinition of PBUFSIZE, adjust whitespace.
+	* config/pa/tm-hppa.h (REGISTER_BYTES): Use 4 rather than
+	REGISTER_RAW_SIZE (1).
+	Together these changes work around a bug in HP's compiler.  Both
+	seem to be necessary.
+
+Mon Apr 11 09:18:24 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* paread.c (pa_symtab_read): Handle ST_STUB symbols and symbols
+	with scope SS_EXTERNAL.  ST_ENTRY symbols in dynamic executables
+	are type mst_solib_trampoline.
+
+Fri Apr  8 17:14:37 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* config/m68k/es1800.mt: Change comments.
+
+Fri Apr  8 17:14:37 1994  Rob Savoye  (rob@darkstar.cygnus.com)
+
+	* config/m68k/monitor.mt (TDEPFILES): Don't include remote-es.o.
+
+Fri Apr  8 15:35:30 1994  Stu Grossman  (grossman at cygnus.com)
+
+	* lynx-nat.c:  Restore regmap structure for SPARC.  It's needed
+	for core files.
+
+Fri Apr  8 14:53:35 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* values.c (unpack_long): Remove obsolete comment about using a
+	switch statement.
+
+	* symfile.c (symbol_file_command): Add comments about command syntax.
+
+Thu Apr  7 17:25:21 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+			  Jim Kingdon  (kingdon@cygnus.com)
+
+	* infrun.c (IN_SOLIB_TRAMPOLINE):  Correct comment, trampolines
+	are in the .plt section.
+	* minsyms.c (lookup_solib_trampoline_symbol_by_pc,
+	find_solib_trampoline_target):  New functions for handling
+	stepping into -g compiled shared libraries.
+	* symtab.h (lookup_solib_trampoline_symbol_by_pc,
+	find_solib_trampoline_target):  Add prototypes.
+	* config/tm-sunos.h (IN_SOLIB_TRAMPOLINE, SKIP_TRAMPOLINE_CODE):
+	Define to handle stepping into  -g compiled shared libraries.
+	* config/tm-sysv4.h (SKIP_TRAMPOLINE_CODE):  Define to handle
+	stepping into  -g compiled shared libraries.
+
+Thu Apr  7 17:22:54 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* configure.in:  Add mips-*-sysv4* support.
+	* config/mips/mipsv4.mh, config/mips/mipsv4.mt,
+	config/mips/tm-mipsv4.h, config/mips/xm-mipsv4.h, mipsv4-nat.c:
+	New files for MIPS SVR4 support.
+	* Makefile.in:  Update for new mipsv4 files.
+	* alpha-tdep.c (heuristic_proc_desc, find_proc_desc):  Use
+	read_next_frame_reg to obtain the frame relative stack pointer.
+	* mips-tdep.c (heuristic_proc_desc):  Use read_next_frame_reg to
+	obtain the frame relative stack pointer.
+	* mdebugread.c (parse_partial_symbols, psymtab_to_symtab1):
+	Handle stStatic and stStaticProc symbols in stabs-in-ecoff output
+	by entering them into the minimal symbol table.
+	* printcmd.c (print_scalar_formatted):  Do not try to unpack to
+	a long for float formats.
+	* solib.c:  Include "elf/mips.h" only if DT_MIPS_RLD_MAP does not
+	get defined in <link.h>.
+	* solib.c (solib_add):  Add shared library sections to the section
+	table of the target before adding the symbols.
+	* partial-stab.h:  Relocate static and global functions.
+	* dbxread.c (read_dbx_symtab):  Remove unused variable
+	end_of_text_address.  Relocate text_addr when passing it
+	to end_psymtab.
+
+	For Alpha OSF/1 targets, enable gdb to set breakpoints in shared
+	library functions before the executable is run. Retrieve dynamic
+	symbols from stripped executables.
+	* mipsread.c (read_alphacoff_dynamic_symtab):  New function.
+	* mipsread.c (mipscoff_symfile_read):  Use it. Issue warning message
+	if no debugging symbols were found.
+	* alpha-tdep.c (alpha_skip_prologue):  Silently return the unaltered
+	pc if memory at the pc is not accessible and GDB_TARGET_HAS_SHARED_LIBS
+	is defined.
+	* config/alpha/nm-alpha.h (GDB_TARGET_HAS_SHARED_LIBS):  Define,
+	OSF/1 has shared libraries.
+
+Thu Apr  7 15:11:11 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+	* dbxread.c (read_dbx_dynamic_symtab): Adjust for recent changes
+	to BFD handling of dynamic symbols.
+
+Tue Apr  5 15:29:25 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (hppa_fix_call_dummy): If FUN is a procedure label,
+	then gets its real address into FUN and its GOT/DP value into %r19.
+
+	* tm-hppa.h (CALL_DUMMY): Use %r20, not %r19 as a temporary.
+
+	* hppa-tdep.c (frameless_function_invocation): If no unwind
+	descriptor was found, then assume this was not a frameless
+	function invocation.
+	(frame_saved_pc): If the saved PC is in a linker stub, then
+	return the return address which the linker stub will return to.
+
+        * xm-hppab.h: Never define USG.
+        * xm-hppah.h: Always define USG.
+
+Tue Apr  5 12:58:47 1994  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	* values.c (unpack_long, value_from_longest),
+	valarith.c (value_binop):  Allow TYPE_CODE_RANGE.
+
+Fri Apr  1 14:04:34 1994  Jason Merrill  (jason@deneb.cygnus.com)
+
+	* symfile.c (deduce_language_from_filename): .cpp is a C++ extension.
+
+Fri Apr  1 00:44:00 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	For SVR4 targets, enable gdb to set breakpoints in shared
+	library functions before the executable is run.
+	* elfread.c (elf_symtab_read):  Handle symbols for shared library
+	functions.
+	* sparc-tdep.c (in_solib_trampoline):  Renamed to in_plt_section
+	and moved to objfiles.c.
+	* objfiles.c (in_plt_section):  Moved to here from sparc-tdep.
+	* config/tm-sysv4.h (IN_SOLIB_TRAMPOLINE):  Use new in_plt_section.
+	* config/sparc/tm-sun4sol2.h (IN_SOLIB_TRAMPOLINE):  Removed,
+	the new generic definition from tm-sysv4.h works for Solaris.
+
+Wed Mar 30 16:14:27 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+	* elfread.c (elf_symtab_read): Change storage_needed,
+	number_of_symbols and i to long.  Rename get_symtab_upper_bound to
+	bfd_get_symtab_upper_bound.  Check for errors from
+	bfd_get_symtab_upper_bound and bfd_canonicalize_symtab.
+	* nlmread.c (nlm_symtab_read): Same changes.
+
+Wed Mar 30 11:43:29 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* xcoffread.c (xcoff_next_symbol_text): New function.
+	(read_xcoff_symtab): Set next_symbol_text_func to it.
+	Move raw_symbol outside of read_xcoff_symtab.
+
+	* remote.c (getpkt): Remove unused "out" label.
+
+Wed Mar 30 09:15:42 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* breakpoint.c (print_it_normal): Allow GDB to notify the user
+	about more than one watchpoint being triggered.
+
+Wed Mar 30 08:24:18 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/m68k/tm-dpx2.h: Include tm-m68k.h not nonexistent tm-68k.h.
+
+Wed Mar 30 00:31:49 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* blockframe.c (find_pc_partial_function):  mst_file_text
+	symbols do not live in the shared library transfer table.
+	* ch-exp.y (decode_integer_value, match_character_literal,
+	match_bitstring_literal):  Guard tolower calls with isupper,
+	tolower on old BSD systems blindly subtracts a constant.
+	* dbxread.c (read_ofile_symtab):  Check for __gnu_compiled_* as
+	well when determining the producer of the object file.
+	* mdebugread.c (has_opaque_xref):  New function to check for
+	cross reference to an opaque aggregate.
+	* mdebugread.c (parse_symbol, parse_partial_symbols):  Do not
+	enter typedefs to opaque aggregates into the symbol tables.
+	* mdebugread.c (parse_external):  Remove skip_procedures argument,
+	it has always been 1.  Remove code that handled stProc symbols,
+	it was never executed and was wrong, as the index of a
+	stProc symbol points to the local symbol table and not to the
+	auxiliary symbol info. Update caller.
+	* mdebugread.c (parse_partial_symbols):  Do not enter external
+	stProc symbols into the partial symbol table, they are already
+	entered into the minimal symbol table.
+	* config/i386/tm-symmetry.h:  Clean up, it is now only used for Dynix.
+	Remove all conditionals and definitions for ptx.
+	I386_REGNO_TO_SYMMETRY moved to here from symm-tdep.c.
+	Fix addresses of floating point registers in REGISTER_U_ADDR.
+	STORE_STRUCT_RETURN now handles cc and gcc conventions.
+	FRAME_CHAIN, FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC,
+	IN_SIGTRAMP, SIGCONTEXT_PC_OFFSET defined to make backtracing through
+	signal trampoline code work.
+	* config/i386/xm-symmetry.h:  Clean up, it is now only used for Dynix.
+	Remove all conditionals and definitions for ptx.
+	Remove KDB definitions.
+	* symm-nat.c (store_inferior_registers):  Fetch registers before
+	storing them to obtain valid floating point control registers.
+	Store fpu registers.
+	* symm-nat.c (print_1167_control_word):  Dynix 3.1.1 defines
+	FPA_PCR_CC_C0 and FPA_PCR_CC_C1, avoid duplicate case value.
+	* symm-nat.c (fetch_inferior_registers, child_xfer_memory):
+	Fix typos.
+	* symm-nat.c (child_resume):  Update type of `signal' parameter.
+	* symm-tdep.c (I386_REGNO_TO_SYMMETRY):  Moved to tm-symmetry.h.
+
+Tue Mar 29 23:01:33 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (hppa_fix_call_dummy): Use an alternate method for
+	calling import stubs for functions in shared libraries.
+
+Tue Mar 29 21:14:04 1994  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	* ch-exp.y:  Implement SIZE(mode_name) and SIZE(expression).
+
+	* ch-lang.c (chill_is_varying_struct):  Magic string is
+	was "<var_length>" is now "__var_length" (more portable).
+
+Tue Mar 29 19:41:34 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* remote.c (getpkt): If we get a timeout, actually retry rather
+	than just giving up the first time it happens.
+	* remote.c: Document sequence numbers.
+	(remote_store_registers): Change syntax of 'P' request so that it
+	never looks like a sequence number.
+
+Tue Mar 29 16:06:01 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* os9kread.c (record_minimal_symbol): add section_offset to
+	relocate minimal symbol table.
+	* os9kread.c (read_minimal_symbols): ditto.
+	* os9kread.c (os9k_symfile_init): increase size of dbg and stb
+	file names.
+	* os9kread.c (read_os9k_psymtab): if there's no dbg file, just
+	return. Also if file addr is 0 leave it 0, not to relocate.
+	* remote-os9k.c (_initialize_remote_os9k): add 'set remotexon',
+	'set remotexoff' and 'set remotelog' commands.
+
+Tue Mar 29 12:38:45 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* remote.c (remote_store_registers): Add 'P' request to set an
+	individual register.
+	(remote_write_bytes, remote_read_bytes): Use %lx, not %x, to print
+	a target address.
+
+Sat Mar 26 07:05:18 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/sparc/tm-sparc.h: Define USE_REGISTER_NOT_ARG.
+	* stabsread (define_symbol): If USE_REGISTER_NOT_ARG, go back to
+	combining all 'p' and 'r' pairs into a LOC_REGPARM.
+
+	* command.c (do_setshow_command, case var_string): Never add a
+	space to the end of the string.
+	* NEWS: Document this change.
+	* .gdbinit: Add a space to the "set prompt" command.
+
+Fri Mar 25 12:40:41 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	*  m3-nat.c, i386m3-nat.c, config/i386/i386m3.mh: Many minor
+	changes to make it compile (it doesn't link yet).
+
+	* buildsym.c (start_subfile, patch_subfile_names), demangle.c
+	(set_demangling_style, set_demangling_command): Use savestring not
+	strdup.  We were not dealing properly with a NULL return from
+	strdup, and were not declaring strdup (the system header may or
+	may not have it).
+
+	* valprint.c (val_print): Remove inaccurate comment about what
+	types can be stub types.
+
+	* config/i386/ptx.mh (XDEPFILES): Add coredep.o.  Delete infptrace.o.
+	* symm-nat.c (child_wait, _initialize_symm_nat, kill_inferior):
+	Supply alternate version if ATTACH_DETACH is not defined.
+	* ptx4-nat.c, config/i386/{nm-ptx4.h, ptx4.mh, ptx.mt, ptx4.mt,
+	tm-ptx.h, tm-ptx4.h, xm-ptx.h, xm-ptx4.h}: New files.
+	* configure.in: Recognize i[34]86-sequent-sysv4* host.
+
+Fri Mar 25 10:14:03 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (skip_prologue): Do nothing if not at the beginning
+	of a function.
+	(skip_trampoline_code): Rewrite and add support for argument
+	relocation stubs stubs, import/export stubs, calls through
+	"_sr4export" and cascaded trampolines.
+
+	* hppa-tdep.c (skip_prologue): Return "pc" not zero
+	if no unwind descriptor is found.
+
+	* tm-hppa.h (NUM_REGS): Bump to 128 registers.
+	(REGISTER_NAMES): Add entries for "right-half" of FP registers.
+	(REGISTER_RAW_SIZE, MAX_REGISTER_RAW_SIZE): Do not treat FP regs
+	differently.  All registers are four bytes.
+	(REGISTER_BYTES, REGISTER_BYTE): Simplify now that all registers are
+	the same size.
+	(REGISTER_VIRTUAL_TYPE): Use builtin_type_float for all FP regs.
+
+	* hppa-tdep.c (pa_print_fp_reg): Update to print even numbered FP
+	registers as both single and double values (fetching 2nd 32bit half
+	as necessary).  Annotate each register printed with its precision.
+
+	* paread.c (read_unwind_info): Fix off-by-one error.
+
+Fri Mar 25 08:33:28 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* main.c (complete_command): Deal with it if arg is NULL.
+
+Thu Mar 24 07:12:09 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/mips/tm-mips.h (SETUP_ARBITRARY_FRAME): Revise comment
+	regarding using the PC--using the PC is necessary and all the
+	FIXME comments in the world won't make it go away.
+
+	* valops.c (value_at, value_at_lazy): Give error if we dereference
+	a pointer to void.
+	* gdbtypes.h: Fix comments regarding TYPE_CODE_VOID.
+	* stabsread.c: Use 1, not 0, for TYPE_LENGTH of void types.
+
+	* stabsread.c (patch_block_stabs): Add comment about what happens
+	if the definition is in another compilation unit from the stab.
+
+	* dbxread.c (end_psymtab): Add comment about empty psymtabs.
+
+Wed Mar 23 07:50:33 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* main.c (complete_command): New command, from Rick Sladkey
+	<jrs@world.std.com>.
+	(symbol_completion_function): Don't declare rl_point and
+	rl_line_buffer; they are now declared in readline.h.
+	(show_commands): Don't declare history_base; it is declared in
+	history.h.
+	* command.c (lookup_cmd): Don't delete trailing whitespace.
+	Reverts change of 14 May 1989.
+
+Wed Mar 23 16:14:52 1994  Stu Grossman  (grossman at cygnus.com)
+
+	* minsyms.c (prim_record_minimal_symbol):  Move section deduction
+	code from prim_record_minimal_symbol_and_info() to here.  Callers
+	of the latter can legitimately supply a section number of -1.
+
+Wed Mar 23 07:50:33 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdbtypes.h, gdbtypes.c: Add comments regarding whether static
+	member functions have an element in args for a (nonexistent) this
+	pointer.
+
+Tue Mar 22 20:12:53 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* config/pa/tm-hppao.h (NO_PC_SPACE_QUEUE_RESTORE): Define.
+
+	* hppa-tdep.c (hppa_pop_frame): Do not restore the PC space
+	queue if NO_PC_SPACE_QUEUE_RESTORE is defined.
+
+	* stabsread.c (REG_STRUCT_HAS_ADDR): Accept additional argument
+	for the structure's type.  All callers changed.
+
+	* valops.c (call_function_by_hand): Check REG_STRUCT_HAS_ADDR
+	for each structure argument rather than assuming it's either
+	true or false for all structure arguments.
+
+	* config/pa/tm-hppa.h (REG_STRUCT_HAS_ADDR): Depend only
+	on the length structure passed, not the compiler used.
+
+	* config/sparc/tm-sparc.h (REG_STRUCT_HAS_ADDR): Accept additional
+	argument for the structure's type.
+
+Tue Mar 22 15:28:33 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* values.c (set_internalvar): Don't set var->value until we are
+	sure there won't be an error().
+
+	* remote.c (get_offsets): Reinstate comment which was in
+	remote_wait about use of SECT_OFF_TEXT and so on.
+
+Mon Mar 21 13:11:30 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* symmisc.c (maintenance_check_symtabs):  New function to check
+	consistency of psymtabs and symtabs.
+	* symtab.h (maintenance_check_symtabs):  Add prototype.
+	* maint.c:  Add new `maint check-symtabs' command.
+	* config/i386/tm-i386aix.h, config/i386/tm-sun386.h,
+	config/i386/tm-symmetry.h (REGISTER_CONVERT_TO_RAW):  Fix typo.
+	* config/i386/tm-symmetry.h:  Make comment inside #if 0 a real
+	comment.
+	* config/i386/tm-symmetry.h (STORE_STRUCT_RETURN):  Cast argument
+	to write_memory to avoid warnings from gcc.
+	* config/i386/xm-symmetry.h:  Add missing #endif.
+	* config/i386/nm-symmetry.h (NO_PTRACE_H):  Add for Dynix.
+	* config/i386/symmetry.mt (TDEPFILES):  Add i386-tdep.o.
+	* config/i386/symmetry.mh (NAT_FILE, NATDEPFILES):  Add.
+
+Mon Mar 21 11:50:28 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (hppa_fix_call_dummy): Use value_ptr.
+	(hppa_push_arguments): Likewise.
+
+Mon Mar 21 11:02:51 1994  Stu Grossman  (grossman at cygnus.com)
+
+	* alpha-tdep.c:  Gobs of changes (many imported from mips-tdep) to
+	improve remote debugging efficiency.  Also fixed problems with
+	doing function calls for programs with no entry points.
+	* infcmd.c (run_stack_dummy):  Use CALL_DUMMY_ADDRESS instead of
+	entry_point_address.
+	* inferior.h (PC_IN_CALL_DUMMY):  ditto.
+	* mdebugread.c (parse_symbol, parse_procedure, parse_external,
+	parse_lines):  Pass section_offsets info to these routines so that
+	we can relocate symbol table entries upon readin.
+	* (psymtab_to_symtab_1):  Set symtab->primary to tell
+	objfile_relocate to do relocations for our symbols.
+	* (ecoff_relocate_efi):  New routine to relocate adr field of PDRs
+	(which hang off of the symbol table).
+	* Use prim_record_minimal_symbols_and_info instead of
+	prim_record_minimal_symbols to supply section info to make minimal
+	symbol relocations work.
+	* minsyms.c (prim_record_minimal_symbols_and_info):  If section is
+	-1, try to deduce it from ms_type.
+	* objfiles.c (objfile_relocate):  Use ALL_OBJFILE_SYMTABS where
+	appropriate.  Handle relocation of MIPS_EFI symbols special. Also,
+	add code to relocate objfile->sections data structure.
+	* remote.c (get_offsets):  Use new protocol message to acquire
+	section offsets from the target.
+	* (remote_wait):  Get rid of relocation stuff.  That's all handled
+	by objfile_relocate now.
+	* config/alpha/alpha-nw.mt (TM_FILE):  Use tm-alphanw.h.
+	* config/alpha/tm-alpha.h:  Define CALL_DUMMY_ADDRESS, and
+	VM_MIN_ADDRESS.
+	* config/alpha/tm-alphanw.h:  DECR_PC_AFTER_BREAK=0, VM_MIN_ADDRESS=0.
+
+Mon Mar 21 10:09:06 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hpread.c (_initialize_hpuxread): Don't call add_symtab_fns if
+	HPREAD is not defined.
+
+Sun Mar 20 15:21:57 1994  Doug Evans  (dje@cygnus.com)
+
+	* sparc-tdep.c (sparc_frame_find_save_regs): Use REGISTER_RAW_SIZE
+	instead of 4.
+	* sp64-tdep.c (target_ptr_bit, set_target_ptr_bit): Deleted,
+	can no longer set this at run time.
+	* config/sparc/sp64.mt (SIMFILES): Use remote-sim.o now.
+	(TM_CLIBS): Define to -lm, the simulator uses the sqrt() function.
+	* config/sparc/tm-sp64.h (FPS_REGNUM, CPS_REGNUM): Define (so
+	sparc-tdep.c compiles).
+	(TARGET_PTR_BIT): Must be a constant now, fix at 64.
+
+Sat Mar 19 08:51:12 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/m68k/{cisco.mt,tm-cisco.h}: New files.
+	* Makefile.in (ALLPARAM, ALLCONFIG): Add them.
+	* configure.in: Recognize m68*-cisco*-*.
+
+	* Makefile.in (TAGS): Use variables directly, rather than using
+	find, to locate TM_FILE, XM_FILE, and NAT_FILE.  This is faster
+	and means that these filenames no longer need be unique across all
+	the config/* directories.
+	* configure.in: Put the config/*/ into TM_FILE, etc.
+
+	* m68k-stub.c (computeSignal): Return SIGFPE, not SIGURG, for chk
+	and trapv exceptions.
+
+	* target.h (struct section_table), objfiles.h (struct obj_section):
+	Change name of field sec_ptr to the_bfd_section.  More mnemonic
+	and avoids the (sort of, for the ptx compiler) name clash with
+	the name of the typedef.
+	* exec.c, xcoffexec.c, sparc-tdep.c, rs6000-nat.c, osfsolib.c,
+	solib.c, irix5-nat.c, objfiles.c, remote.c: Change users.
+
+	* utils.c: Include readline.h.
+	* Makefile.in (utils.o): Add dependency.
+
+	* remote.c (getpkt): Add support for run-length encoding.
+
+Fri Mar 18 19:11:15 1994  Steve Chamberlain  (sac@jonny.cygnus.com)
+
+	* utils.c (prompt_for_continue): Call readline, not gdb_readline.
+
+Fri Mar 18 10:25:55 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* dstread.c (record_minimal_symbol): New arg objfile.  Pass it to
+	prim_record_minimal_symbol.
+	Callers: Pass it.
+
+	* regex.c (EXTEND_BUFFER): Adjust pointers within buffer by
+	computing their offset from the start of the old buffer and adding
+	to the new buffer, rather than by assuming we can add the
+	difference between the old buffer and the new buffer (it might not
+	fit in an int).  Merge in cosmetic differences from emacs regex.c
+	version of this macro.
+
+Wed Mar 16 15:28:54 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+	* Makefile.in (install-only): Fix use of program_transform_name.
+
+Wed Mar 16 07:18:43 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* printcmd.c: Remove "set print fast-symbolic-addr off" command.
+	The bug which it worked around was fixed on 25 Feb 94 in coffread.c,
+	so I'm nuking the command.
+	* symtab.c (find_addr_symbol): Comment out, no longer used.
+
+	* main.c (main): Don't init_source_path for the -cd argument.  Now
+	that source_path doesn't contain the current_directory from when
+	GDB started up, init_source_path is no longer useful (and is
+	harmful because it clobbers a source_path set in $HOME/.gdbinit).
+
+	* TODO: Remove item about line numbers being off.  It is useless
+	and confusing without a reproducible test case (it mentions
+	proceed(), but I was able to step through proceed without trouble).
+
+Tue Mar 15 13:39:23 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	For Sunos 4.x targets, enable gdb to set breakpoints in shared
+	library functions before the executable is run. Retrieve dynamic
+	symbols from stripped executables.
+	* symtab.h (minimal_symbol_type):  Add mst_solib_trampoline type.
+	* parse.c (write_exp_msymbol), symmisc.c (dump_msymbols),
+	symtab.c (list_symbols):  Handle mst_solib_trampoline.
+	* minsyms.c (lookup_minimal_symbol):  Handle mst_solib_trampoline
+	for all targets, remove IBM6000_TARGET dependencies.
+	* dbxread.c (read_dbx_dynamic_symtab):  New function.
+	* dbxread.c (dbx_symfile_read):  Use it.
+	* dbxread.c (SET_NAMESTRING):  Set namestring to
+	"<bad string table index>" instead of "foo" if the string index is
+	corrupt.
+	* xcoffread.c (read_xcoff_symtab):  Use mst_solib_trampoline instead
+	of mst_unknown.
+	* symtab.c (list_symbols):  Take from_tty as parameter and pass it
+	to break_command. Handle mst_file_* minimal symbol types.
+	* config/i386/tm-i386bsd.h: Give just macro name, not args, to #undef.
+
+Tue Mar 15 11:40:43 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* c-exp.y(yylex): fix potential memory overflow.
+
+Tue Mar 15 10:33:28 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* environ.c (set_in_environ): Eliminate special handling of PATH and
+	GNUTARGET.
+	* putenv.c: Removed, conflicts with system declaration of
+	putenv on RS/6000 running AIX 3.2.5, and above change makes it
+	unnecessary. 
+	* Makefile.in: Change accordingly.
+	* procfs.c (procfs_create_inferior): Change comment accordingly.
+
+Tue Mar 15 10:05:27 1994  Jim Kingdon  (kingdon@cygnus.com)
+
+	* rs6000-tdep.c: Change value to value_ptr.
+
+Sun Mar 13 17:19:03 1994  Jeff Law  (law@snake.cs.utah.edu)
+
+	* hpread.c (read_hpux_symtab: Correctly determine the namespace
+	and address class of SVAR, DVAR, TYPEDEF, TAGDEF, CONST, and
+	MEMENUM symbols.  Do not include function-scoped variables in
+	the partial symbol table.
+
+Sun Mar 13 09:45:51 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* i386m3-nat.c: Include floatformat.h.
+	(get_i387_state): Use memset not bzero.
+
+	* Version 4.12.3.
+
+	* Makefile.in: Enable commented out getopt_h, bfd_h, etc.  Change
+	ieee-float.h to floatformat.h.
+
+	* valprint.c (val_print_string): Ignore error if the error
+	happened after a terminating '\0'.
+
+	* c-valprint.c (c_val_print): Never add 1 to return value from
+	val_print_string; just return what it returns.
+
+	* target.h (enum target_signal): Add TARGET_SIGNAL_FIRST, for
+	looping through all of the enums.
+	* infrun.c (signals_info): Use it.
+
+Fri Mar 11 08:08:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* main.c (main): When printing warning about bad baud rate, don't
+	use warning(); it relies on current_target which isn't set up yet.
+
+	* breakpoint.c (_initialize_breakpoint): Update docstring for
+	tbreak to match what the code actually does.  Don't mention tbreak
+	in docstrings for "enable once" or "enable breakpoints once".
+
+Thu Mar 10 08:52:38 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* symfile.h (ADD_PSYMBOL_VT_TO_LIST): Don't put a semicolon after
+	while (0).  That defeats the whole purpose of using do . . . while (0).
+	* mdebugread.c (parse_partial_symbols): Don't use ?: expression as
+	list for ADD_PSYMBOL_TO_LIST; the macro takes its address and
+	using a ?: expression as an lvalue is not portable.
+
+	* stabsread.c (define_symbol): If REG_STRUCT_HAS_ADDR, also
+	convert a LOC_ARG to a LOC_REF_ARG.  Update code which combines
+	'p' and 'r' symbol descriptors into a single symbol to look for a
+	LOC_REF_ARG.
+	* README, config/sparc/tm-sparc.h: Update comments.
+
+Wed Mar  9 21:43:24 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mdebugread.c (parse_type):  Do not complain for types with
+	an `indexNil' aux index, these are simply undefined types.
+	Remove indexNil check from caller of parse_type.
+	* mdebugread.c (parse_partial_symbols):  Do not enter
+	stGlobal, scCommon symbols into the minimal symbol table, their
+	value is the size of the common, not its address.
+	Handle scInit, scFini, scPData and scXData sections.
+	Use minimal symbol type mst_file_* for stLabel symbols, instead of
+	mst_*.
+	Enter stProc symbols into the global_psymbols list once, not into
+	the static_psymbols_list.
+	Get rid of dummy psymtab if it is empty, to allow proper detection
+	of stripped executables.
+	* mdebugread.c (cross_ref):  Allow cross references to Fortran
+	common blocks.
+
+Wed Mar  9 15:23:19 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabsread.c (common_block_end, fix_common_block): Stash the
+	struct pending * in the SYMBOL_TYPE, not the SYMBOL_NAMESPACE, so
+	as to not assume that a pointer fits in an enum.
+
+Wed Mar  9 18:56:36 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* os9kread.c (fill_sym): check compiler verion number for pre-
+	UltraC compiler.
+	* os9kread.c (os9k_process_one_symbol): address of symbol is
+	relative to section not module.
+	* stabsread.c (define_symbol): add symbol type 's' as local
+	symbol for os9k.
+	* remote-os9k.c: add command 'set monitor_log' to turn on or off
+	monitor logging.
+	* remote-os9k.c: fix bug in delete breakpoint, single step trace.
+	* remote-os9k.c: fix bug in 'set remotebaud' function.
+	* remote-os9k.c (rombug_link): minimize checking so to improve
+	speed.
+	* symfile.c (symbol_file_command): check if failed to link, also make
+	the command be able to accept more than one filenames.
+	* target.c (target_link): check if failed to link with rombug.
+	* config/i386/tm-i386os9k.h : add #define DECR_PC_AFTER_BREAK 0.
+
+Wed Mar  9 15:23:19 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* remote-es.c (es1800_child_ops): Don't declare it static.
+
+Tue Mar  8 11:42:39 1994  Jim Kingdon  (kingdon@cygnus.com)
+
+	* config/i386/tm-i386v4.h: Give just macro name, not args, to #undef.
+
+Tue Mar  8 06:56:13 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* dbxread.c: New variable lowest_text_address.
+	(record_minimal_symbol, read_dbx_symtab): Set it.
+	(read_dbx_symtab): Use lowest_text_address + text_size instead of
+	end_of_text_address.
+	* config/gould/tm-pn.h: Add comment regarding END_OF_TEXT_DEFAULT.
+
+	* dbxread.c (end_psymtab): Remove old and commented out
+	capping_global and capping_static.  Fix comments regarding
+	N_SO_ADDRESS_MAYBE_MISSING to match the real name of the macro.
+
+	* parser-defs.h: Add "extern" to start of variable declarations so
+	we don't end up with commons.
+	* parse.c: Define these variables.
+
+	* irix5-nat.c (find_solib): Cast o_path to CORE_ADDR when using it
+	as one.
+
+Mon Mar  7 13:00:50 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* alpha-tdep.c: Change value to value_ptr.
+
+Sun Mar  6 17:36:53 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* solib.c (elf_locate_base):  New function to locate the address
+	of the dynamic linker's runtime structure in the dynamic info section.
+	* solib.c (locate_base):  Use it instead of iterating over the list
+	of mapped address segments.
+	* solib.c (look_for_base, bfd_lookup_symbol):  Removed, no longer
+	necessary.
+
+Fri Mar  4 09:50:47 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* hppa-tdep.c (pc_in_linker_stub): Move decl to beginning of file.
+	(pc_in_interrupt_handler): New function.  Also add PARAM decl.
+	(find_proc_framesize): Deal with HPUX setting SAVE_SP bit for
+	signal trampoline and interrupt routines.
+	(frame_saved_pc): Handle signal trampolines and interrupt routines.
+	(frame_chain, frame_chain_valid): Likewise.
+	(hppa_frame_find_saved_regs): Likewise.  Also deal with special
+	saved regs convention for SP.
+	
+	* tm-hppa[bho].h: FRAME_FIND_SAVED_PC_IN_SIGTRAMP): Define.
+	(FRAME_BASE_BEFORE_SIGTRAMP): Define.
+	(FRAME_FIND_SAVED_REGS_IN_SIGTRAMP): Define.
+
+	* tm-hppah.h (IN_SIGTRAMP): Define.
+
+Thu Mar  3 12:41:16 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* ch-exp.y (match_simple_name_string): Accept '_' as well as an
+	alphabetic character as the start of a name.
+
+	* sparclite/Makefile.in (all install): Build and install aload.
+
+	* configure.in: Accept i[34]86-*-*sysv32 because that is what
+	config.guess and config.sub produce.
+
+	* mips-tdep.c: Change value to value_ptr.
+
+Wed Mar  2 09:17:55 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* breakpoint.c, breakpoint.h, c-valprint.c, ch-valprint.c,
+	cp-valprint.c, eval.c, expprint.c, findvar.c, language.c,
+	objfiles.h, infcmd.c, printcmd.c, stack.c, typeprint.c,
+	valarith.c, valops.c, valprint.c, value.h, values.c: Replace
+	value with value_ptr.  This is for the ptx compiler.
+	* objfiles.h, target.h: Don't declare a "sec_ptr" field using a
+	"sec_ptr" typedef.
+	* symm-nat.c: Add a bunch of stuff for symmetry's ptrace stuff.
+	#if 0 i386_float_info.
+	* symm-tdep.c (round): Remove.  Also remove sgttyb.
+	* symm-tdep.c: Remove lots of stuff which duplicates stuff from
+	i386-tdep.c.  Remove register_addr and ptx_coff_regno_to_gdb.
+	* i386-tdep.c (i386_frame_find_saved_regs): Put in
+	I386_REGNO_TO_SYMMETRY check in case it is needed for Dynix
+	someday.
+	* config/i386/nm-symmetry.h: Change KERNEL_U_ADDR.  Move
+	stuff from PTRACE_READ_REGS, PTRACE_WRITE_REGS macros to
+	symm-nat.c.  Define CHILD_WAIT and declare child_wait().
+	* config/i386/tm-symmetry.h: Remove call function stuff; stuff in
+	tm-i386v.h is apparently OK.
+	* config/i386/xm-symmetry.h [_SEQUENT_]: Define HAVE_TERMIOS not
+	HAVE_TERMIO.  Define MEM_FNS_DECLARED, NEED_POSIX_SETPGID, and
+	USE_O_NOCTTY.
+
+Wed Mar  2 11:31:08 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* osfsolib.c (xfer_link_map_member): Update to use new
+	target_read_string interface.
+
+Wed Mar  2 09:17:55 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* infrun.c (wait_for_inferior): In checking
+	remove_breakpoints_on_following_step, check
+	through_sigtramp_breakpoint as well as step_resume_breakpoint.
+
+Tue Mar  1 16:22:56 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* os9kread.c (os9k_process_one_symbol): Rename
+	VARIABLES_INSIDE_BLOCK to OS9K_VARIABLES_INSIDE_BLOCK.
+	* symfile.c (symbol_file_command): Check for (CORE_ADDR)-1, not
+	(CORE_ADDR)0, from target_link, since that is what it uses.
+	Process name at end, not during parsing (like we did before Kung's
+	change), so that -readnow and -mapped can appear anywhere.
+	Make text_relocation a local variable.
+	* config/i386/i386os9k.mt: Fix comment.
+	* Makefile.in (ALLDEPFILES): Add remote-os9k.c.
+	* os9kread.c: Put "comments" after #endif inside /* */.
+	* stabsread.h: Add os9k_stabs variable.
+	* stabsread.c (start_stabs), os9kread.c (os9k_process_one_symbol):
+	Set it.
+	* stabsread.c (define_symbol): If os9k_stabs, put a 'V' symbol
+	descriptor in global_symbols not local_symbols.
+	(read_type): If os9k_stabs, accept 'c', 'i', and 'b' type
+	descriptors.
+	(read_type): If os9k_stabs, accept function parameters after 'f'
+	type descriptor.
+	(read_array_type): If os9k_stabs, don't expect index type and
+	expect lower and upper to be separated by ',' not ';'.
+	(read_enum_type): If os9k_stabs, read a number before the first
+	enumeration constant.
+	(os9k_init_type_vector): New function.
+	(dbx_lookup_type): Call it when starting new type vector.
+	* config/i386/tm-i386os9k.h: Define BELIEVE_PCC_PROMOTION.
+	* (os9k_process_one_symbol): Call define_symbol not os9k_define_symbol.
+	* os9kstab.c: Removed.
+	* Makefile.in: Update accordingly.
+	* objfiles.c (objfile_relocate_data): Removed.
+	* remote-os9k.c (rombug_wait): Call objfile_relocate
+	not objfile_relocate_data.
+	* objfiles.h, objfiles.c: Remove find_pc_objfile.
+	* remote-os9k.c (rombug_wait): Call find_pc_section not
+	find_pc_objfile.
+	* main.c (quit_command): Check inferior_pid; revert Kung change.
+	* remote-os9k.c (rombug_create_inferior): Set inferior_pid.
+
+Tue Mar  1 14:56:14 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* os9kread.c: New file to read os9000 style symbo table.
+	* os9kstab.c: new file to read os9000 style stabs.
+	* remote-os9k.c: remote protocol talking to os9000 rombug monitor.
+	* objfiles.c (find_pc_objfile): new function to search objfile
+	from pc.
+	* objfiles.c (objfile_relocate_data): new function to relocate
+	data symbols in symbol table.
+	* objfiles.h: Add two aux fields in struct objfile to handle
+	multiple symbol table files situation like in os9000.
+	* symfile.c: Change so 'symbol-file' command can handle multiple
+	files. Also call target_link() to get relocation infos.
+	* target.c (target_link): new function to get relocation info when
+	a symbol file is requested to load.
+	* main.c (quit_command): take out 'inferior_pid != 0' condition,
+	because in cross mode there's no inferior pid, bit they need to
+	be detached.
+	Makefile.in: add os9kread.c os9kstab.c and .o's.
+	configure.in: add i386os9k target.
+	config/i386/i386os9k.mt: new add.
+	config/i386/tm-i386os9k.h: new add.
+
+Tue Mar  1 13:16:10 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* config/sparc/tm-sun4sol2.h (IN_SIGTRAMP):  Handle ucbsigvechandler.
+	* sparc-tdep.c (sparc_frame_saved_pc):  Handle ucbsigvechandler.
+
+Tue Mar  1 11:54:11 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* target.c, target.h (target_read_string): Provide error detection to
+	caller.  Put string in malloc'd space, so caller need not impose
+	arbitrary limits.
+	* solib.c (find_solib): Update to use new interface.
+	* irix5-nat.c (find_solib): Read o_path from inferior
+	(clear_solib): Free storage for o_path.
+	* valprint.c (val_print_string): Add comments.
+
+Mon Feb 28 23:54:39 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* symtab.c (decode_line_1):  Handle the case when skip_quoted does not
+	advance `p'.
+
+Mon Feb 28 12:40:46 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* value.h (struct value): Add modifiable field.
+	* values.c (allocate_value, record_latest_value, value_copy): Set it.
+	(record_latest_value): Don't mess with VALUE_LVAL of value.
+	* valops.c (value_assign): Check it.  Reword existing error
+	message on not_lval.
+
+	* mips-tdep.c (mips_step_skips_delay), config/mips/tm-mips.h
+	(STEP_SKIPS_DELAY): Added.
+	* infrun.c (proceed) [STEP_SKIPS_DELAY]: Check for a breakpoint in
+	the delay slot.
+
+	* valprint.c (val_print_string): If errcode is set, always print
+	an error, regardless of force_ellipsis.  In the non-EIO case,
+	just print the error message rather than calling error().  Don't
+	access *(bufptr-1) if bufptr points to the start of the buffer.
+	When looking for '\0', don't increment bufptr and addr if bufptr
+	started out already at limit.  If an error happens on fetching the
+	first character, don't print the string.
+
+Sun Feb 27 21:05:06 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* config/m68k/tm-apollo68b.h: Remove HAVE_68881 define; it is
+	obsolete. 
+
+	* i387-tdep.c, i386-tdep.c i386v-nat.c, i386aix-nat.c,
+	i386m3-nat.c, config/m68k/tm-m68k.h, i960-tdep.c
+	config/i960/tm-i960.h, remote-nindy.c, config/m88k/tm-m88k.h,
+	m88k-tdep.c: Use floatformat.h instead of ieee-float.h.
+	* sparc-tdep.c: Remove now-obsolete ieee-float.h stuff
+	* findvar.c: Update comment regarding ieee-float.h.
+
+Sun Feb 27 21:39:48 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* config/i386/tm-i386v4.h (I386V4_SIGTRAMP_SAVED_PC, IN_SIGTRAMP,
+	FRAME_CHAIN, FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC):
+	Define to make backtracing through the various sigtramp handlers
+	work.
+	* i386-tdep.c (i386v4_sigtramp_saved_pc):  New routine to fetch
+	the saved pc from ucontext on the stack for SVR4 signal handling.
+
+Fri Feb 25 09:41:11 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* remote.c, remote-mon.c, remote-utils.c, remote-utils.h,
+	target.h, remote-es.c, remote-nindy.c: Don't set baud rate if
+	baud_rate is -1.  Remove sr_get_baud_rate and sr_set_baud_rate;
+	just use the global variable itself.  When printing baud rate,
+	don't print a baud rate if baud_rate is -1.
+
+	* coffread.c (read_coff_symtab): Pass mst_file_* to
+	record_minimal_symbol for C_STAT symbols.  Put C_EXT and C_STAT
+	symbols in the minimal symbols regardless of SDB_TYPE.
+
+Thu Feb 24 08:30:33 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* breakpoint.h (enum bptype): New type bp_through_sigtramp.
+	(bpstat_what_main_action): New code BPSTAT_WHAT_THROUGH_SIGTRAMP.
+	* breakpoint.c (bpstat_what): Return BPSTAT_WHAT_THROUGH_SIGTRAMP
+	if we hit a bp_through_sigtramp breakpoint.  Remove kludge which
+	ignored bs->stop for a bp_step_resume breakpoint.
+	* infrun.c (wait_for_inferior): Make a through_sigtramp_breakpoint
+	which performs one (the check_sigtramp2 one) of the functions
+	which had been handled by the step_resume_breakpoint.  For each
+	use of the step_resume_breakpoint, make it still use the
+	step_resume_breakpoint, use the through_sigtramp_breakpoint, or
+	operate on both.
+	Deal with BPSTAT_WHAT_THROUGH_SIGTRAMP return from bpstat_what.
+	When setting the frame address of the step resume breakpoint, set
+	it to the address for frame *before* the call instruction is
+	executed, not after.
+
+	* mips-tdep.c (mips_print_register): Print integers using
+	print_scalar_formatted rather than duplicating all the
+	CC_HAS_LONG_LONG and so on.
+	(mips_push_dummy_frame): Use read_register_gen rather than using
+	read_register and then putting it back in target format with
+	store_unsigned_integer.  If registers are more than 4 bytes, give
+	an error rather than have some registers overwrite other
+	registers.
+	#if 0 unused include of opcode/mips.h.
+
+	* symfile.h: Don't declare arguments for coff_getfilename.
+
+	* defs.h: Revert Kung change regarding FORCE_LONG_LONG.
+
+Thu Feb 24 08:06:52 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* configure.in (hppa*-*-osf*): New configuration.
+	* config/pa/hppaosf.mt: New target makefile fragment.
+	* config/pa/tm-hppao.h: New target include file.
+
+Thu Feb 24 04:29:19 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* exec.c (print_section_info):  Print entry point for exec_bfd only.
+	* ser-unix.c (wait_for):  Fix typo in HAVE_TERMIO case.
+	* dwarfread.c:  Remove second inclusion of <sys/types.h>, which
+	causes problems if <sys/types.h> has no multiple inclusion protection.
+
+Wed Feb 23 16:28:55 1994  Jeffrey A. Law  (law@cygnus.com)
+
+	* tm-hppa.h (CALL_DUMMY): Add two NOP instructions to the end of
+	the call dummy to avoid kernel bugs in HPUX, BSD, and OSF1.
+	(CALL_DUMMY_LENGTH): Changed accordingly.
+
+Wed Feb 23 16:21:25 1994  Stu Grossman  (grossman at cygnus.com)
+
+	* sparc-stub.c (trap_low):  Make trap handler work for arbitrary
+	numbers of register windows.
+
+	* sparclite/hello.c:  Add factorial function for testing.
+	* salib.c:  Use macros instead of constants for I/O addresses to
+	make 931 support easier.
+	* sparclite.h:  Change constraint for LOC to "rJ" to force use of
+	register in sta/lda instructions.
+
+Wed Feb 23 10:39:18 1994  Jim Kingdon  (kingdon@rtl.cygnus.com)
+
+	* dbxread.c (process_one_symbol): Set
+	block_address_function_relative for COFF like we do for ELF and SOM.
+
+Sat Feb 19 03:17:32 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mdebugread.c (new_psymtab):  Pass in section_offsets and set
+	them in the pst.
+	* mdebugread.c (handle_psymbol_enumerators):  New function to enter
+	the enumerators of an ecoff enum into the partial symbol table.
+	* mdebugread.c (parse_partial_symbols):  Call it.
+	* symfile.c (reread_symbols):  Initialize objfile->*_psymbols.next.
+	* symmisc.c (dump_psymtab):  Fix typo, clean up output of section
+	offsets. Cast psymtab->read_symtab to PTR before passing it to
+	gdb_print_address.
+	* i386-tdep.c (i386_skip_prologue):  Skip over instructions that
+	set up the global offset table pointer in pic compiled code.
+	* config/mips/tm-mips.h (FIX_CALL_DUMMY):  For big endian targets,
+	error() on TYPE_CODE_FLT arguments whose size is greater than 8,
+	swap all other TYPE_CODE_FLT arguments as mips_push_arguments
+	ensures that floats are promoted to doubles before they are pushed
+	on the stack.
+
+Fri Feb 18 23:12:59 1994  Stu Grossman  (grossman at cygnus.com)
+
+	* sparclite/Makefile.in, sparclite/salib.c, sparclite/sparclite.h:
+	Fixup cache_on and flush_i_cache so that they work for both the
+	930 and 932 processors.  Rewrite most low level funcs (uart
+	access & cache stuff) to use new ASI access macros in sparclite.h.
+	Also make it easy to access second serial port.
+
+Fri Feb 18 22:17:33 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+	* hp300ux-nat.c: Don't incloude <sys/dir.h>, <sys/ioctl.h>, or
+	<sys/stat.h>; not needed.
+
+Fri Feb 18 08:26:29 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stack.c (print_frame_info): In "pathological" case, don't
+	distrust the line number information.
+
+Fri Feb 18 16:51:14 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* mips-tdep.c (mips_print_register): handle 64 bits register.
+	* valprint.c (print_longest): fix a bug in printing 64 bits value.
+
+Fri Feb 18 08:26:29 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Version 4.12.2.
+
+	* Makefile.in (install): Do the sed for program_transform_name
+	ourselves instead of worrying about INSTALL_XFORM.  This enables
+	users to override INSTALL_PROGRAM in the standard way.
+
+	* Makefile.in (c-exp.tab.o, ch-exp.tab.o, m2-exp.tab.o): Don't
+	depend on Makefile.in.
+
+	* defs.h, valprint.c: Make longest_to_int a function not a macro.
+	Only test against INT_MIN if a LONGEST is bigger than an int.
+
+	* README: Change GhostScript to Ghostscript.
+
+Fri Feb 18 07:30:55 1994  Jim Kingdon  (kingdon@cygnus.com)
+
+	* config/rs6000/{tm-rs6000lynx.h,nm-rs6000lynx.h,xm-rs6000lynx.h}:
+	Rename to tm-rs6000ly.h, nm-rs6000ly.h, xm-rs6000ly.h for 14
+	character file names.
+	* Makefile.in (ALLPARAM): Add these files.
+
+	* config/mips/littlemips64.mt: Rename to mipsel64.mt for 14
+	character file names.
+	* Makefile.in: Add Kung's new mips64 files.
+
+Thu Feb 17 17:25:47 1994  Kung Hsu  (kung@mexican.cygnus.com)
+
+	* configure.in: add mips64-*-elf, mips64-*-ecoff, mips64el-*-elf,
+	mips64el-*-ecoff and mips64-big-*.
+	* defs.h: get rid of FORCE_LONG_LONG.
+	* mips-tdep.c (mips_find_saved_regs): add sd and sdc1 instruction
+	parsing. Change register size to be MIPS_REGSIZE.
+
+Thu Feb 17 09:30:22 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
+
+	* corelow.c, exec.c, irix5-nat.c, mipsread.c, objfiles.c, 
+	osfsolib.c, rs6000-nat.c, solib.c, symfile.c, utils.c, 
+	xcoffexec.c: Use bfd_get_error and bfd_set_error and new error names.
+
+Fri Feb 11 21:47:24 1994  Steve Chamberlain  (sac@sphagnum.cygnus.com)
+
+	* remote-hms.c (readchar, hms_open, hms_fetch_register): Made more robust.
+	(remove_commands, add_commands): Add/remove hms-drain when target
+	is connected.
+
+Fri Feb 11 16:11:38 1994  Stu Grossman  (grossman at cygnus.com)
+
+	* configure.in:  Add Lynx/rs6000 support.
+	* lynx-nat.c:  Clean up some Sparc stuff.  Clean up ptrace error
+	messages.  Add rs6000 support.  Don't try to modify unwritable
+	registers.
+	* rs6000-nat.c:  Move lots of native dependent stuff (like core
+	file support) from rs6000-tdep.c & xcoffexec.c to here.
+	* rs6000-tdep.c:  Move native dependent stuff to nat.c.
+	* xcoffexec.c:  Move native dependent stuff to nat.c.
+	* config/rs6000/nm-rs6000.h:  Move defs of SOLIB_* macros to here
+	from tm	file.
+	* config/rs6000/tm-rs6000.h:  Remove defs of SOLIB_* funcs, cuz they're
+	really native.
+	* config/rs6000/tm-rs6000lynx.h, config/rs6000/xm-rs6000lynx.h:
+	New files to support Lynx/rs6000.
+
+Tue Feb  8 00:32:28 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* README:  Remove note about gcc warnings on alpha, these should be
+	gone now.
+	* c-exp.y, ch-exp.y, core.c, corelow.c, eval.c, fork-child.c, 
+	m2-exp.y, minsyms.c, nlmread.c, parse.c, putenv.c, regex.c
+	remote-utils.c, stabsread.c:  Include <string.h>.
+	* regex.c:  Include "defs.h", change re_comp argument to const char *.
+	* infptrace.c (fetch_register, store_inferior_registers):  Change
+	regaddr to type CORE_ADDR.
+	* config/alpha/alpha-nw.mt, config/alpha/alpha-osf1.mt (MT_CFLAGS):
+	Remove, no longer necessary now that we use bfd_vma for a CORE_ADDR.
+
+Mon Feb  7 09:21:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* symtab.h: Always define BYTE_BITFIELD to nothing.
+
+Mon Feb  7 08:44:17 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* config/m68k/{m68k-em.mt,tm-m68k-em.h}: Remove; no longer used.
+	* configure.in: Remove comment about m68k-em.mt.
+	* Makefile.in: Remove references.
+
+Mon Feb  7 08:22:42 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* defs.h [BFD64]: Use BFD_HOST_64_BIT, not nonexistent
+	BFD_HOST_64_TYPE.
+
+Sun Feb  6 15:56:09 1994  Jeff Law  (law@wild.cs.utah.edu)
+
+	* hpread.c (hpux_symfile_init): Use obj_som_* rather than obj_* to
+	access BFD private data.  Search for the "$TEXT$" space rather
+	than ".text".
+	(hppa_sym_fns): Add bfd target flavour to initializer.
+
+Sun Feb  6 06:55:15 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* target.c (target_preopen): If target_kill doesn't remove the
+	target from the stack, use pop_target to do it.
+
+	* coffread.c (process_coff_symbol, case C_TPDEF): Don't set name
+	of TYPE_CODE_PTR or TYPE_CODE_FUNC types.  This parallels similar
+	changes to stabsread.c from summer 1993.
+
+	* remote-udi.c (udi_files_info): If prog_name is NULL, just skip
+	printing the program, rather than passing NULL to printf.
+	(udi_detach): Set udi_session_id to -1 so that udi_close doesn't
+	try to call UDIDisconnect again.  Print better message.
+	(udi_kill): Just call UDIDisconnect ourselves, rather than doing
+	it via udi_close.
+	(udi_create_inferior): If udi_session_id is negative, open a new
+	TIP rather than giving an error.
+
+	* config/mips/mipsm3.mh, config/i386/i386m3.mh,
+	config/ns32k/ns32km3.mh: Define NAT_FILE.
+	* config/nm-m3.h: Change guard from _OS_MACH3_H_ and _OS_MACH3_H
+	(it was inconsistent and namespace-wrong) to NM_M3_H.
+	* m3-nat.c (mach_really_wait): Change parameter name to ourstatus.
+	(m3_open): New function.
+	(m3_ops): Use it.
+	* TODO: Update Mach section.
+
+	* Makefile.in: Remove "rapp" stuff; it is superseded by gdbserver.
+
+Sun Feb  6 13:26:21 1994  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	* printcmd.c (printf_command):  Add missing single-letter
+	backslash-escape sequences, and improve error message.
+
+Sun Feb  6 06:55:15 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* corelow.c (solib_add_stub, core_open): Pass address of from_tty
+	rather than trying to shove an int into a pointer and back out
+	again.  This avoids compiler warnings.
+
+	* defs.h (alloca): Declare as void *, not char *, on hpux.
+	Don't prototype it, just declare the return type.
+
+Sun Feb  6 03:25:41 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* config/i386/tm-sun386.h, config/i386/tm-symmetry.h
+	(REGISTER_CONVERT_TO_RAW):  Add missing backslash.
+
+Sat Feb  5 08:03:41 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* remote-mips.c (mips_fetch_registers): If regno is FP_REGNUM or
+	ZERO_REGNUM, just read it as zero without talking to the board.
+
+	* config/i386/tm-i386aix.h (REGISTER_CONVERT_TO_RAW): Add missing
+	backslash.
+	* i386-tdep.c (i386_extract_return_value): Pass TYPE_LENGTH (type)
+	to store_floating, not nonexistent variable len.
+
+	* remote-mips.c (mips_insert_breakpoint, mips_remove_breakpoint):
+	New functions.
+	(mips_store_word): Change calling convention to return errors, and
+	to provide old contents if the caller wants it.
+	(mips_xfer_memory): Deal with errors from mips_store_word.
+	* config/mips/tm-idt.h, config/mips/tm-idtl.h: Remove BREAKPOINT
+	define now that remote-mips.c doesn't use BREAKPOINT.
+
+	* remote-mips.c (mips_create_inferior): Call warning if arguments
+	specified, and then execute "set args" command.  Call error, not
+	mips_error, if executable file not specified.
+
+	* remote-e7000.c: Replace "snoop" command (e7000_noecho) with
+	remote_debug.
+
+	* config/rs6000/tm-rs6000.h (STORE_STRUCT_RETURN): Don't cast
+	to unsigned int.
+
+Sat Feb  5 05:27:05 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* value.h (print_longest):  Rename "value" to "val" in prototype
+	declaration because some compilers don't like arguments whose
+	names are the same as types.
+	* remote.c (remote_xfer_memory):  Cast "myaddr" to unsigned char *
+	before passing it to remote_*_bytes.
+
+Fri Feb  4 15:53:18 1994  Steve Chamberlain  (sac@cygnus.com)
+
+	* h8500-tdep.c (saved_pc_after_call): The size of the
+	pc is memory model dependent. (segmented_command,
+	unsegmented_command, _initialize_h8500_tdep): New commands to
+	change memory model.
+	* remote-e7000.c (_initialize_remote_e7000): Change name of snoop
+	command.
+	* remote-hms.c (hms_load): Remove breakpoints when loaded.
+	(hms_wait): Use new status structure
+	(hms_open): Push the target here. (hms_before_main_loop): Not
+	here.  (supply_val, hms_fetch_register, hms_store_register):  Cope
+	with H8/500 names too. (hms_fetch_register): Take out REGISTER_TYPE.
+	* sh-tdep.c (show_regs, initialize_sh_tdep): New command to print
+	all registers in a compact way.
+
+Fri Feb  4 07:41:13 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* config/rs6000/tm-rs6000.h: Declare rs6000_struct_return_address
+	as CORE_ADDR to match definition in rs6000-tdep.c.
+
+Fri Feb  4 01:14:20 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* dwarfread.c (process_dies):  Skip nested TAG_compile_unit DIEs.
+	* dwarfread.c (add_partial_symbol):  Do not enter opaque aggregate
+	definitions into the psymtab.
+
+Thu Feb  3 12:38:58 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* m68k-stub.c: Treat mc68332 like mc68020 most places.  Provide
+	a special exceptionSize for the 68332.
+
+	* remote-udi.c (udi_attach): If no arguments, print error.
+
+Thu Feb  3 17:34:05 1994  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (VERSION):  Bump to 4.12.1
+	* NEWS, README:  Update to match 4.12 release.
+
+Thu Feb  3 12:38:58 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* command.c (empty_sfunc): New function.
+	(add_set_cmd): Use it instead of not_just_help_class_command.
+	(not_just_help_class_command): Change calling convention back to
+	what it was before yesterday's change.
+
+	* stabsread.c (read_sun_builtin_type): Skip the semicolon at the end
+	of the type if present.
+
+Wed Feb  2 11:16:45 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* printcmd.c (decode_format): Don't blithely set the size for
+	an address to 'w'.  Make it 'g' or 'h', depending on TARGET_PTR_BIT.
+
+	* defs.h: Just typedef CORE_ADDR to bfd_vma.  Include bfd.h.
+	If BFD64, make a LONGEST a BFD_HOST_64_BIT.
+	* defs.h (longest_to_int): Don't depend on CC_HAS_LONG_LONG; instead
+	always just check against INT_MIN and INT_MAX (this also fixes things
+	if sizeof (long) > sizeof (int), e.g. Alpha).
+	* config/pa/tm-hppa.h, config/i386/sun386.h, config/rs6000/tm-rs6000.h:
+	Don't define LONGEST or BUILTIN_TYPE_LONGEST.
+	* gdbtypes.h: Remove BUILTIN_TYPE_LONGEST and
+	BUILTIN_TYPE_UNSIGNED_LONGEST.
+	* language.h, c-lang.c, ch-lang.c, m2-lang.c, language.c: Remove
+	longest_int and longest_unsigned_int.
+	* value.h (struct value): Just align to LONGEST, rather than worrying
+	about CC_HAS_LONG_LONG.
+	* valarith.c (value_binop): Figure out type ourself based on
+	sizeof (LONGEST) rather than relying on BUILTIN_TYPE_LONGEST.  The
+	point is that we don't depend on CC_HAS_LONG_LONG anymore.
+	* valprint.c (val_print_type_code_int): Just call
+	extract_unsigned_integer directly, rather than going through
+	unpack_long.
+	* printcmd.c (decode_format): Remove code which would sometimes
+	change 'g' size to 'w' for integers.  print_scalar_formatted handles
+	printing huge integers well enough, thank you.
+
+	* command.c (add_set_cmd, not_just_help_class_command): Change
+	to make this the sfunc, not cfunc, since that is how we call it.
+	* command.h: Comment difference between sfunc and cfunc.
+	* demangle.c (set_demangling_command): Add third arg since that
+	is how it is called.
+	(_initialize_demangler): Use sfunc, not cfunc, for
+	set_demangling_command, since that is how it is called.
+	Remove show_demangling_command; it has no effect.
+
+	* command.c (shell_escape): Report errors correctly (with error
+	message from strerror).
+
+Wed Feb  2 14:35:41 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+	* xcoffread.c (read_xcoff_symtab): Change CSECT_LEN to use
+	x_scnlen.l rather than x_scnlen to match corresponding change in
+	coff/internal.h.
+
+Wed Feb  2 11:16:45 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* gdbtypes.h, ch-typeprint.c, ch-valprint.c:
+	Change comments regarding TYPE_CODE_BOOL.
+	* language.c (boolean_type): Always return 1 for TYPE_CODE_BOOL,
+	regardless of the language.
+	(value_true): Just call value_logical_not regardless of language.
+	* coffread.c (coff_read_enum_type), stabsread.c (read_enum_type):
+	Remove #if 0'd code which makes some enums TYPE_CODE_BOOL.
+	* language.h: Improve comment for la_builtin_type_vector.
+	* m2-lang.c (_initialize_m2_language): Don't add any fields to
+	builtin_type_m2_bool.
+
+Tue Feb  1 17:13:32 1994  Kevin Buettner (kev@cujo.geg.mot.com)
+
+	* config/m88k/{tm-delta88.h,tm-delta88v4.h}, m88k-tdep.c:
+	Define IN_SIGTRAMP and backtrace correctly through signal handlers.
+
+Tue Feb  1 22:13:25 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* procfs.c (wait_fd):  Handle EINTR error return from PIOCWSTOP ioctl
+	by restarting the ioctl.
+
+Tue Feb  1 16:16:25 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* target.h (target_wait): Add comment about calling
+	return_to_top_level.
+
+Tue Feb  1 12:21:00 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+	* coffread.c (read_one_sym): bfd_coff_swap_aux_in now takes
+	additional arguments.
+	* xcoffread.c (read_xcoff_symtab, read_symbol_lineno): Likewise.
+
+Mon Jan 31 16:10:41 1994  Stu Grossman  (grossman at cygnus.com)
+
+	* sparc-stub.c:  Remove unnecessary #include of memory.h.
+
+Mon Jan 31 12:12:34 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* mips-tdep.c: Remove code which sets saved_regs from
+	init_extra_frame_info and put it in new function mips_find_saved_regs.
+	(READ_FRAME_REG): Remove macro and replace uses with the expansion.
+	* mips-tdep.c, config/mips/tm-mips.h: When examining ->saved_regs,
+	check if it is NULL and call mips_find_saved_regs if so.
+
+	* remote-mips.c: Use unfiltered, not filtered, output most places.
+
+	* blockframe.c (get_prev_frame_info): Detect and stop an infinite
+	backtrace.  Revise comments.
+
+Mon Jan 31 09:40:33 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mdebugread.c (parse_procedure):  Remove _sigtramp kludges for
+	alpha and irix. The _sigtramp case has to be handled properly
+	in the tdep files if we have no ecoff debugging info.
+	* alpha-tdep.c (alpha_frame_saved_pc, alpha_frame_chain),
+	mips-tdep.c (mips_frame_saved_pc):  Handle signal handler frames
+	without PC_REGNUM kludge.
+	* mdebugread.c (fixup_sigtramp), mips-tdep.c (read_next_frame_reg):
+	Clean up handling of mips sigtramp frames, improve comments.
+
+Sat Jan 29 23:25:57 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* paread.c (read_unwind_info): Fix typo.
+
+	* paread.c (pa_symtab_read): Update the "check_strange_names"
+	filter to match GCC's current output.  Filter out section symbols
+	(which the HP linker sometimes puts in the wrong place).
+
+Sat Jan 29 07:44:59 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* serial.h (SERIAL_SET_TTY_STATE): Comment return value.
+
+	* Makefile.in (TAGS): Just echo one line, rather than the whole thing.
+
+	* Makefile.in: Remove all references to sparcly-nat.c.
+
+	* Makefile.in (HFILES_NO_SRCDIR): Include dcache.h remote-utils.h
+	remote-sim.h directly, rather than via $(remote_utils_h).  This avoids
+	duplicating serial.h and target.h.
+
+	* Makefile.in: Don't set M_INSTALL and M_UNINSTALL.  These variables
+	are not used anywhere (a 5 Oct 1993 change removed the uses).
+
+	* config/m68k/monitor.mt (TDEPFILE): Add remote-es.o.
+	* config/m68k/es1800.mt: Add comment.
+	* remote-es.c: Extensive changes to update to current conventions.
+
+	* ser-unix.c (wait_for, hardwire_readchar) [HAVE_TERMIO, HAVE_TERMIOS]:
+	If the timeout is too big to fit in c_cc[VTIME], then do multiple reads
+	to achieve the desired timeout.
+	* serial.h (serial_t): Add field timeout_remaining.
+
+Fri Jan 28 08:45:02 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* c-exp.y (yylex): Reenable nested type code.
+
+Fri Jan 28 15:40:33 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* a29k-tdep.c (examine_tag): Add comment regarding argcount.
+
+	* remote-mips.c (mips_ops): Fix docstring.
+
+	* remote-bug.c (bug_ops): Remove spurious newline from docstring.
+
+	* config/m68k/tm-monitor.h: Changes to bring this into accordance
+	with the old tm-m68k-em.h:
+	(GDBINIT_FILENAME, DEFAULT_PROMPT): Remove.
+	(HAVE_68881): Don't undefine; HAVE_68881 is obsolete.
+	(REGISTER_NAMES): Don't muck with it; what tm-m68k.h has is fine.
+	Add FIXME regarding GET_LONGJMP_TARGET.
+
+	* remote-udi.c (udi_close, udi_detach, udi_kill): Add comments.
+	* infptrace.c (kill_inferior): Add comments.
+	* main.c (quit_command): Call target_close after we kill or
+	detach.
+	* remote-udi.c (udi_close): Don't error() if QUITTING.
+
+Fri Jan 28 11:55:52 1994  Rob Savoye  (rob@darkstar.cygnus.com)
+
+	* configure.in: Make m68k-coff and aout add monitor support in
+	addition to the standard serial support.
+
+Fri Jan 28 08:45:02 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* mdebugread.c (psymtab_to_symtab_1): Don't complain on stLabel with
+	index indexNil.
+
+Fri Jan 28 10:40:34 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/pa/tm-hppa.h: Define macro SMASH_TEXT_ADDRESS.
+	* elfread.c (record_minimal_symbol_and_info),
+	dwarfread.c (process_dies), paread.c (pa_symtab_read): Use it.
+
+Thu Jan 27 15:12:23 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* i386-stub.c: Add ".text" right before "mem_fault:".
+
+	* main.c (baud_rate): Add FIXME comment about printing -1 value.
+
+	* remote-utils.c (usage): Fix message to be accurate and conform
+	more closely to normal conventions.
+
+	* remote-utils.c (gr_files_info): Have the exec_bfd test control
+	whether to show information about exec_bfd, and not control whether
+	to show information about device and speed.
+
+	* remote-utils.c (gr_open): If sr_get_device returns NULL, give
+	usage message, don't dump core.
+
+	* remote-bug.c (bug_write_memory): Use alloca, not GCC extension
+	for variable size array.
+	(bug_fetch_register, bug_store_register): Rename "value" to
+	"fpreg_buf" because some compilers don't like variables whose
+	names are the same as types.
+	(bug_store_register): Use a cast when converting char * to
+	unsigned char *.
+
+	* symmisc.c (maintenance_print_symbols): Don't refer to the name
+	of the command in error message (the text was referring to the old
+	name of the command).
+
+	* symmisc.c (dump_symtab): Fix args to fprintf_filtered.
+
+	* c-typeprint.c (c_type_print_base): Have SHOW == 0 mean to print
+	full details on structure elements without names.  This partially
+	reverts the changes of 1 Jul 1993 and 31 Aug 1993; I think this aspect
+	of those changes was accidental.
+
+	* stack.c (parse_frame_specification): If SETUP_ARBITRARY_FRAME is
+	defined, make it an error to specify a single argument which is not
+	a frame number.
+
+	* Makefile.in (version.c), main.c (print_gdb_version): Use
+	host_alias and target_alias, not host_canonical and
+	target_canonical, to print configuration.
+
+Wed Jan 26 10:57:21 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* parse.c (write_exp_msymbol): Use new type msymbol_addr_type instead
+	of builtin_type_long.  It is necessary to get a type which is
+	TARGET_PTR_BIT bits in size; builtin_type_long might not be big enough.
+
+	Fix many sins which will come up in 32 bit x 64 bit GDB, and
+	various miscellaneous things discovered in the process:
+	* printcmd.c, defs.h (print_address_numeric): New function.
+	* c-valprint.c (c_val_print), ch-valprint.c (chill_val_print)
+	breakpoint.c (describe_other_breakpoints, breakpoint_1, mention),
+	cp-valprint.c (cplus_print_value), infcmd.c (jump_command),
+	printcmd.c, stack.c, symfile.c, symmisc.c, valprint.c:
+	Use it.
+	* utils.c, defs.h (gdb_print_address): New function.
+	* expprint (dump_expression), gdbtypes.h: Use it.
+	* breakpoint.c (describe_other_breakpoints),
+	symmisc.c (dump_symtab, print_symbol):
+	Use filtered not unfiltered I/O.
+	(remove_breakpoints): Remove BREAKPOINT_DEBUG code.  Might as well
+	just run gdb under a debugger for this (and it had problems with
+	printing addresses, how to print b->shadow, etc.).
+	* buildsym.c (make_blockvector), core.c (memory_error),
+	exec.c (print_section_info), maint.c (print_section_table),
+	mdebugread.c (parse_procedure), solib.c, source.c, symfile.c,
+	symmisc.c, symtab.c, valops.c, valprint.c, xcoffexec.c:
+	Add comments saying code is broken.  Marked with "FIXME-32x64".
+	* dbxread.c (process_one_symbol), partial-stab.h (default),
+	remote-vx.c (vx_run_files_info):
+	Don't cast int being passed to local_hex_string.
+	* symmisc.c (print_symbol): Don't cast long being passed to %lx.
+	* symtab.h (general_symbol_info): Add comment about SYMBOL_VALUE
+	only being a long.
+	* symmisc.c (print_symbol): Print "offset" in message for LOC_ARG
+	and LOC_LOCAL.
+	* printcmd.c (print_address): Remove #if 0 code with ADDR_BITS_REMOVE.
+	* source.c: Include <sys/types.h> regardless of USG.
+
+Tue Jan 25 12:58:26 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* valops.c (value_assign):  Set `type' after coercing toval.
+	* c-valprint.c (c_val_print), ch-valprint.c (chill_val_print):
+	Use extract_unsigned_integer to get the address of a reference.
+
+Tue Jan 25 11:31:53 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabsread.c (STABS_CONTINUE, error_type), partial-stab.h:
+	AIX can use ? instead of \ for continuation.  Deal with it.
+
+	* paread.c (read_unwind_info): Just assign to objfile->obj_private,
+	not OBJ_UNWIND_INFO.  Assigning to a cast is a GCC-ism which
+	the HP compiler in ANSI mode doesn't like.
+
+	* main.c: When defaulting HAVE_SIGSETMASK based on USG, just do it
+	based on USG, rather than defining HAVE_SIGSETMASK to an
+	expression containing defined.  Having a macro used in #if expand
+	to an expression containing "defined" is undefined according to
+	ANSI, and the HP compiler in ANSI mode doesn't do what we wanted
+	it to.
+
+Mon Jan 24 20:51:29 1994  John Gilmore  (gnu@cygnus.com)
+
+	* sparc-nat.c (fetch_inferior_registers, store_inferior_registers):
+	Clean up the changes of 11 Jan, as recommended by Peter Schauer.
+
+Fri Jan 21 19:10:44 1994  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	* ch-exp.y (match_string_literal):  Allow a zero-length string.
+	* ch-lang.c (chill_printstr):  Don't print zero-length string funny.
+
+Sat Jan 22 17:08:48 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* i386aix-nat.c (i386_float_info): Reverse order of registers before
+	passing them to print_387_status.
+	(print_387_status): Don't subtract top from 7 before using it.
+	* i387-tdep.c: Remove comment about AIX wanting "top" subtracted
+	from 7; the above explains it.
+
+Sat Jan 22 20:25:11 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mips-tdep.c (init_extra_frame_info):  Use frame relative stack
+	pointer value when fixing up the frame at the start of a function.
+
+Sat Jan 22 12:29:13 1994  Stu Grossman  (grossman at cygnus.com)
+
+	* lynx-nat.c (fetch_core_registers):  Load the I & L regs for the
+	Sparc from the stack.
+
+Sat Jan 22 08:30:42 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* remote-mips.c (mips_initialize): Clear mips_initializing via
+	cleanup chain, not directly.
+
+	* ser-unix.c (wait_for) [HAVE_TERMIO, HAVE_TERMIOS]: Make a timeout
+	of -1 mean forever, like in the HAVE_SGTTY case.  Warn if we are
+	munging the timeout due to the limited range of c_cc[VTIME].
+
+	* fork-child.c, inferior.h (fork_inferior): New argument shell_file.
+	* procfs.c (procfs_create_inferior), inftarg.c (child_create_inferior),
+	m3-nat.c (m3_create_inferior): Pass it.
+	* procfs.c: Remove ptrace function.  It was declared in a way which
+	conflicted with the prototype in unistd.h on Solaris.
+
+Sat Jan 22 01:37:40 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* sparc-tdep.c (frame_saved_pc):  Get the pc from the saved pc
+	in the sigcontext if it is a signal trampoline frame.
+	* config/sparc/tm-sun4sol2.h (IN_SIGTRAMP, SIGCONTEXT_PC_OFFSET):
+	Define for Solaris2.
+
+Sat Jan 22 00:34:47 1994  Stu Grossman  (grossman at cygnus.com)
+
+	* sparc-tdep.c, lynx-nat.c, config/sparc/tm-sparc.h,
+	config/sparc/tm-sparclynx.h:  Move defs of FRAME_SAVED_I0/L0 to
+	tm-sparc.h so they can be overridden if necessary.
+
+Fri Jan 21 17:49:28 1994  Stu Grossman  (grossman at cygnus.com)
+
+	* lynx-nat.c:  Add Sparc support.
+	* sparcly-nat.c:  Remove.  It's useless.
+	* config/sparc/nm-sparclynx.h:  Rewrite.
+	* config/sparc/sparclynx.mh (NATDEPFILES):  Replace sparcly-nat.o
+	with lynx-nat.o
+	* config/sparc/tm-sparclynx.h:  Rewrite.
+
+Fri Jan 21 19:08:48 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+	* rs6000-pinsn.c: Use the new disassembler in the opcodes
+	directory.  Old code was discarded, since the new opcode table has
+	a different format.
+
+Fri Jan 21 14:28:30 1994  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (realclean):  Remove info files per make-stds.texi.
+
+Fri Jan 21 12:47:53 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* dbxread.c (end_psymtab): Only patch psymtab textlow and texthigh
+	if N_SO_ADDRESS_MAYBE_MISSING is defined.
+	* config/sparc/tm-sun4sol2.h: Define it.
+
+Thu Jan 20 15:04:24 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* printcmd.c (print_address_symbolic):  Unconditionally use msymbol
+	if we did not find a symbol.
+
+Fri Jan 21 08:20:18 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* infptrace.c (child_xfer_memory): Only use if CHILD_XFER_MEMORY
+	is not defined.
+
+	* hppab-nat.c (call_ptrace): Delete redundant function.
+	(kill_inferior, attach, detach, child_resume): Likewise.
+	(child_xfer_memory): Likewise.
+
+	* hppah-nat.c (call_ptrace): Delete redundant function.
+	(kill_inferior, attach, detach, child_resume): Likewise.
+
+	* config/pa/hppabsd.mh (NATDEPFILES): Add infptrace.o.
+
+	* config/pa/hppahpux.mh (NATDEPFILES): Add infptrace.o.
+
+	* config/pa/nm-hppab.h (FETCH_INFERIOR_REGISTERS): Define.
+
+	* config/pa/nm-hppah.h (FETCH_INFERIOR_REGISTERS): define.
+	(CHILD_XFER_MEMORY): Define.
+	(PT_*): Define so that generic infptrace.c code can be used.
+
+Fri Jan 21 09:23:33 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* xcoffread.c (xcoff_symfile_read): Make second parameter a
+	struct section_offsets *, not a (nonexistent) struct section_offset *.
+
+	* xcoffread.c (read_xcoff_symtab): Make main_aux just a union
+	internal_xcoff_symtab, not an array of one of them.  Change lots of
+	"main_aux" to "&main_aux" and so on.
+
+	* coffread.c, xcoffread.c: Include <coff/internal.h>
+	before "symfile.h".
+
+Thu Jan 20 17:30:55 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* coffread.c (coff_getfilename): Make it not static.
+
+	* xcoffread.c (read_xcoff_symtab): complain() not abort().
+
+	* xcoffread.c (struct coff_symbol): Rename c_nsyms to c_naux (removes
+	a completely gratuitous difference between xcoffread.c and coffread.c).
+
+Wed Jan 19 15:09:44 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* infrun.c (wait_for_inferior): Don't set frame for
+	step_resume_breakpoint for IN_SIGTRAMP cases.
+
+	* infrun.c (wait_for_inferior), breakpoint.h (struct bpstat_what),
+	breakpoint.c (bpstat_what): Move step_resume from its own field of
+	the struct bpstat_what into the main_action.  Make it override
+	other breakpoints.  This is a conservative change in the sense
+	that before the step resume breakpoint was a breakpoint.c
+	breakpoint, hitting the step resume breakpoint overrode even
+	calling bpstat_stop_status.
+
+Wed Jan 19 12:40:25 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* infrun.c (normal_stop):  Set stop_pc after popping the dummy frame
+	in case execution was stopped in the called function.
+	* stack.c (print_frame_info, frame_info):  If backtracing through
+	a call dummy, handle the starting source line number on a line
+	boundary like backtracing through sigtramp.
+	* sparc-tdep.c (sparc_frame_find_saved_regs):  Get frame address
+	for call dummy frame right.  Remove old test for dummy frame,
+	it has been unused at least since gdb-3.5.
+	* sparc-tdep.c (sparc_push_dummy_frame):  Set return address register
+	of the dummy frame.
+
+Tue Jan 18 16:16:35 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* infcmd.c (signal_command): Accept 0 as legitimate signal number.
+
+Tue Jan 18 14:09:25 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* infrun.c (signals_info), target.c (target_signal_from_name):
+	Use ugly casts to avoid enumvar < enumvar or enumvar++.
+
+Mon Jan 17 22:00:15 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* ser-unix.c (hardwire_noflush_set_tty_state): Don't muck with ICANON.
+	* inflow.c (terminal_ours_1): When discussing how to deal with the
+	tty state, make note of query() as well as readline.
+
+	* infrun.c (_initialize_infrun): Add TARGET_SIGNAL_POLL to list of
+	signals for which stop and print are cleared by default.
+
+Mon Jan 17 20:00:51 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+	* config/pa/tm-hppa.h (unwind_table_entry): Use one of the
+	reserved fields to hold a stub unwind entry type.  Fix typo.
+	(stub_unwind_entry): New structure for raw stub unwind entries.
+	(stub_unwind_types): The types of stubs we may encounter.
+	(UNWIND_ENTRY_SIZE, STUB_UNWIND_ENTRY_SIZE): New defines.
+	* hppa-tdep.c (rp_saved): Use additional information provided
+	by linker stub unwind descriptors.
+	(frameless_function_invocation): Likewise.
+	(frame_chain_valid): Likewise.
+	* paread.c (compare_unwind_entries): New function for sorting
+	unwind table entries.
+	(read_unwind_info): Rewrite to remove dependency on host endianness.
+	Read in data from the $UNWIND_END$ subspace which contains linker
+	stub unwind descriptors.  Merge that data into the basic unwind
+	table.
+
+	* hppab-nat.c (_initialize_kernel_u_addr): Delete unwanted functions.
+
+Mon Jan 17 22:00:15 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* xcoffread.c (read_xcoff_symtab, case C_FILE): Accept the name
+	from either the symbol name or the auxent.
+	* coffread.c, symfile.h (coff_getfilename): Renamed from getfilename,
+	no longer static.
+
+Mon Jan 17 13:35:01 1994  Fred Fish  (fnf@cygnus.com)
+
+	* Makefile.in (ALLPARAM):  Change irix5.h to nm-irix5.h.
+
+Mon Jan 17 12:35:42 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* README:  Update notes for alpha port.
+
+Mon Jan 17 11:15:57 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* i960-tdep.c (i960_fault_to_signal): Return TARGET_SIGNAL_ILL
+	for operation fault, constraint fault, and type fault.
+
+Sun Jan 16 12:46:01 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Makefile.in (init.c): Add comment explaining formatting conventions.
+
+	* c-exp.y (parse_number): Assign to temporary between the right
+	shifts, to work around a bug in the SCO compiler.
+
+	* Makefile.in (ALLCONFIG, ALLPARAM, ALLDEPFILES, HFILES_NO_SRCDIR):
+	Add various files which were added to GDB recently.
+
+	* xcoffread.c (process_xcoff_symbol): Only change 'V' to 'S' if not
+	within_function.
+
+	* Makefile.in: Add mostlyclean target.
+
+Sat Jan 15 10:20:13 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Version 4.11.4.
+
+Sat Jan 15 18:27:34 1994  Per Bothner  (bothner@kalessin.cygnus.com)
+
+	* main.c (show_commands):  Make return type of extern
+	history_get be HIST_ENTRY, rather than struct _hist_entry.
+	(The latter loses with the upcoming merged readline.)
+
+Sat Jan 15 10:20:13 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* minsyms.c (prim_record_minimal_symbol_and_info): Make tempstring
+	const char *, not char *.
+
+	* symtab.h (struct symbol): Make section short, not unsigned short.
+
+	* symtab.c (lookup_symbol): Add comment about QUIT here.
+
+	* utils.c (fputs_unfiltered): Call fputs, not fputs_maybe_filtered.
+
+	* c-exp.y (parse_number): Check for overflow regardless of range
+	checking.  Fix overflow check to use unsigned LONGEST, not
+	unsigned int.
+
+	* c-exp.y (parse_number): Make it so that integer constants are
+	builtin_type_long_long if builtin_type_long isn't big enough or if
+	an "LL" suffix is used.  Properly handle "UL" or "LU" suffixes.
+
+	* c-typeprint.c (c_type_print_varspec_suffix, case TYPE_CODE_FUNC):
+	Print our "()" first, then recurse for the target type.
+
+Fri Jan 14 21:55:39 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* remote-udi.c (udi_create_inferior): Quote empty execfile argument.
+
+	* gdbserver/low-lynx.c: Include <sys/wait.h> not "/usr/include/wait.h".
+
+Fri Jan 14 14:17:06 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* utils.c (request_quit): Re-establish signal handler regardless
+	of USG.
+
+	* config/mips/xm-irix4.h: Define HAVE_TERMIOS.
+
+Fri Jan 14 21:55:39 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* i960-tdep.c: Include target.h.
+
+Fri Jan 14 17:12:28 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* lynx-nat.c (sys/wait.h): Don't use absolute pathname.
+
+Fri Jan 14 11:06:10 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* lynx-nat.c (child_wait): Fix thinkos in struct target_waitstatus
+	changes (status -> ourstatus; declare status, etc.).
+	* config/nm-lynx.h: Fix child_wait prototype and include target.h.
+
+Fri Jan 14 14:17:06 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* Makefile.in (ALLPARAM): Add config/nm-lynx.h.
+
+Fri Jan 14 11:49:44 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+	* remote-mips.c (mips_request, mips_wait): Correct prototypes.
+
+Fri Jan 14 11:37:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/i386/xm-linux.h: Define HAVE_TERMIOS.
+
+Fri Jan 14 01:04:36 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* config/alpha/tm-alpha.h (CALL_DUMMY):  Improve comment.
+
+Thu Jan 13 10:32:38 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* remote-vx.c (vx_wait): Only call i960_fault_to_signal if I80960
+	is defined.  Otherwise just report TARGET_SIGNAL_UNKNOWN.
+
+	* mips-tdep.c (mips_push_arguments): Byteswap struct_addr before
+	writing it.
+
+	Add search to target vector (#if 0'd until after 4.12):
+	* target.h (to_search, target_search): Add.
+	* gdbcore.h, core.c (generic_search): Add.
+	* remote.c (remote_search): Add.
+	* a29k-tdep.c (init_frame_info): Use target_search to find traceback
+	tag.
+
+	* printcmd.c (print_address_symbolic): If set print fast-symbolic-addr
+	is on, call find_pc_function rather than relying just on the minimal
+	symbols (probably only matters for symbol readers which don't put
+	statics in the minimal symbols, but changing this strikes me as
+	not conservative enough).
+	Initialize name_location in all cases.
+	If no symbol and no msymbol, don't print anything symbolic.
+
+	* a29k-tdep.c (push_dummy_frame): Add comment about saving lr0.
+
+Wed Jan 12 20:53:16 1994  John Gilmore  (gnu@cygnus.com)
+
+	* printcmd.c (print_address_symbolic):  Make it search the
+	symtabs for variables as well as functions.  Add `set print
+	fast-symbolic-addr' and default it to fast (the old way).
+	Print line numbers for data items as well as functions.
+
+	* symtab.c (find_addr_symbol):  Return the symtab and the symbol
+	address, if a symbol is found (take two more args pointing to
+	where to store these results).
+
+	* symtab.h (find_addr_symbol):  Add prototype.
+
+Wed Jan 12 19:32:11 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* objfiles.h: Fix comments to reflect the fact that the phrase
+	"top of stack" always refers to where the pushing and popping takes
+	place, regardless of whether it is at the highest or lowest address.
+
+Wed Jan 12 13:23:37 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mdebugread.c (parse_symbol):  Do not set TYPE_TAG_NAME for
+	compiler generated tag names.
+	* mdebugread.c (parse_type):  Handle cross references to qualified
+	aggregate types.
+	* valops.c (value_struct_elt):  Improve error message if the
+	address of a method is requested from an object instance.
+	* valops.c (search_struct_method):  Make name_matched non-static
+	to get it initialized correctly.
+	* config/i386/nm-i386sco.h (CANNOT_STORE_REGISTER):  Define to
+	exclude segment register which are not writable on newer SCO versions.
+
+Wed Jan 12 14:44:45 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* go32-xdep.c: Remove unused function uerror.
+	(sigsetmask): Declare return type.  Declare argument (to match the
+	way it is called).  Explicitly return 0.
+
+Wed Jan 12 01:44:25 1994  John Gilmore  (gnu@cygnus.com)
+
+	* symtab.h (struct symbol, general_symbol_info, minimal_symbol,
+	partial_symbol):  Shrink the storage sizes of symbols, by making
+	enums into 1-byte bitfields when compiled __GNUC__, moving all the
+	enums and small ints to the end of each struct to improve
+	alignment, and switching the section number from int to unsigned
+	short.
+
+Wed Jan 12 00:16:26 1994  John Gilmore  (gnu@cygnus.com)
+
+	* symtab.c (find_addr_symbol):  New routine that will find the nearest
+	symbol associated with an address.  It does so by exhaustive
+	search of the symtabs, so it's slow but complete.
+
+Tue Jan 11 23:57:30 1994  John Gilmore  (gnu@cygnus.com)
+
+	* coffread.c (read_coff_symtab):  Set PC bounds of _globals_ symtab
+	to [0,0] rather than [0, end of first source file].  This avoids
+	problems with other parts of GDB looking for linetables in the
+	_globals_ symtab.  Eliminate variables num_object_files and
+	first_object_file_end.
+
+Tue Jan 11 00:53:46 1994  John Gilmore  (gnu@cygnus.com)
+
+	* a29k-tdep.c (init_frame_info):  Cast null arg to examine_tag.
+	(pop_frame):  Restore PC2 and LR0 from dummy frames.
+	(push_dummy_frame):  Save PC2 and LR0 into dummy frames.
+	(setup_arbitrary_frame):  Handle 3 args and set up real frames.
+	* config/a29k/tm-a29k.h (FRAME_NUM_ARGS):  Update comments.
+	(DUMMY_FRAME_RSIZE):  Add 2 longwords for PC2 and LR0.
+	(SETUP_ARBITRARY_FRAME):  Define.
+
+Tue Jan 11 06:59:10 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* infrun.c, config/mips/tm-irix5.h: Remove #if 0'd AT_FUNCTION_START.
+
+Tue Jan 11 14:27:03 1994  Ian Lance Taylor  (ian@tweedledumb.cygnus.com)
+
+	* remote-udi.c (udi_resume): Correct prototype.
+
+Tue Jan 11 11:10:30 1994  Jeffrey A. Law  (law@snake.cs.utah.edu)
+
+        * config/pa/tm-hppa.h (FRAME_FIND_SAVED_REGS): Call
+	hppa_frame_find_saved_regs.
+	* hppa-tdep.c (dig_fp_from_stack): Delete function.
+	(prologue_inst_adjust_sp): New function.
+	(is_branch, inst_saves_gr, inst_saves_fr): New functions.
+	(skip_prologue): Completely rewrite to use unwind information.
+	(hppa_frame_find_saved_regs): Likewise.
+
+Tue Jan 11 06:59:10 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* remote-mips.c (mips_wait): Use new function mips_signal_from_protocol
+	to convert a signal number with appropriate bounds checking.
+
+	* remote-mips.c (mips_wait): Fix typos (0x177 -> 0177, 0x377 -> 0377).
+
+Tue Jan 11 00:53:46 1994  John Gilmore  (gnu@cygnus.com)
+
+	* stack.c (frame_info):  If FRAME_FIND_SAVED_REGS isn't defined,
+	print a newline to end the display anyway.
+
+	* sparc-tdep.c (sparc_pop_frame):  Pop the fsr and csr (float and
+	coprocessor status regs) when popping a frame.  This fixes 
+	float exceptions that occur after calling inferior functions.
+
+	* sparc-nat.c (fetch_inferior_registers, store_inferior_registers):
+	Read and write the fsr (float status register) to/from the child
+	process along with the float regs.  Remove Peter Schauer's change
+	of May 24 '93, which has higher overhead and doesn't solve the
+	real problem (which was that FSR wasn't being set).
+
+Mon Jan 10 23:16:42 1994  John Gilmore  (gnu@cygnus.com)
+
+	* a29k-tdep.c (examine_prologue):  Don't worry if the ASGEQ
+	stack overflow check isn't right after the register stack
+	adjustment instruction.  Metaware R2.3u compiler moves other
+	things in front of it.  This fix isn't perfect but is what's
+	running.
+
+Mon Jan 10 20:08:23 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* c-valprint.c (c_val_print): Treat TYPE_CODE_RANGE like TYPE_CODE_INT.
+
+	* config/alpha/alpha-netware.mt: Rename to alpha-nw.mt for 14
+	character filenames.
+	* configure.in: Change accordingly.
+
+Mon Jan 10 15:48:36 1994  Tom Lord  (lord@rtl.cygnus.com)
+
+	* m68k-stub.c, sparc-stub.c: removed spurious introduction of 
+	_filtered io routines from these two files.
+
+Fri Jan  7 12:42:45 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* config/i386/tm-i386v.h, config/m68k/tm-m68k.h, config/mips/tm-mips.h,
+	config/vax/tm-vax.h (CALL_DUMMY_BREAKPOINT_OFFSET):  Define.
+	* mdebugread.c (parse_symbol):  Handle enum sh.type produced by
+	DEC c89. 
+	* mdebugread.c (add_line):  Handle zero linenos produced by DEC c89.
+
+Fri Jan  7 12:55:25 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* utils.c (print_sys_errmsg): Call gdb_flush (gdb_stdout) before
+	printing to gdb_stderr.
+
+	* remote-udi.c (udi_kill): Don't close the connection, just set
+	inferior_pid to zero.
+	(udi_mourn): Call remove_breakpoints.
+
+	* remote-udi.c: Remove obsolete need_artificial_traps comment.
+
+	* i386b-nat.c (sregmap): If sEAX, etc., not defined, use tEAX, etc.
+
+Thu Jan  6 07:17:53 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
+
+	* symtab.c (lookup_symbol): Don't try adding .c to the name.
+
+	* remote-bug.c: At the start of each section, reset srec_frame
+	back to 160.
+
+	* target.h: Add TARGET_WAITKIND_LOADED and TARGET_WAITKIND_SPURIOUS.
+	* target.c (store_waitstatus): Add CHILD_SPECIAL_WAITSTATUS hook.
+	* infrun.c (wait_for_inferior): Replace SIGTRAP_STOP_AFTER_LOAD with
+	code which looks for those two waitkinds.  Use switch statement.
+	* config/rs6000/tm-rs6000.h: Replace SIGTRAP_STOP_AFTER_LOAD with
+	CHILD_SPECIAL_WAITSTATUS.
+
+	* procfs.c (procfs_wait): Fix argument name to match 4 Jan changes.
+	* Move target_signal_from_host, target_signal_to_host, and
+	store_waitstatus from inftarg.c to target.c.  procfs needs them.
+	* target.c: Include "wait.h" and <signal.h>.
+	* target.h, infrun.c (proceed), proceed callers: Pass new code
+	TARGET_SIGNAL_DEFAULT instead of -1.  This avoids problems with
+	enums being treated as unsigned and is cleaner.
+	* infrun.c (signals_info): Don't print TARGET_SIGNAL_DEFAULT or
+	TARGET_SIGNAL_0.
+	* infcmd.c (signal_command), infrun.c (signals_info):
+	Don't allow user to specify numeric equivalent of
+	TARGET_SIGNAL_DEFAULT.
+
+Tue Jan  4 15:34:36 1994  Stu Grossman  (grossman@cygnus.com)
+
+	* config/alpha/alpha-netware.mt:  New target support for Alpha
+	running Netware.
+	* configure.in:  Add alpha-*-netware* target.
+
+Tue Jan  4 14:51:35 1994  Stan Shebs  (shebs@andros.cygnus.com)
+
+	* remote-mips.c (mips_wait): Fix ref to TARGET_WAITKIND_STOPPED.
+
+Tue Jan  4 09:47:14 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* target.h: Add enum target_waitkind, enum target_signal, and
+	struct target_waitstatus.  Change status argument to target_wait to
+	be struct target_waitstatus * instead of int *.
+	* target.h, infrun.c, all targets: Change type of signal arguments
+	to resume(), proceed(), and target_resume() from int to enum
+	target_signal.
+	* All targets (*_wait, *_resume): Change accordingly.
+	* infcmd.c (program_info, signal_command), throughout infrun.c, 
+	* fork-child.c, solib.c, hppa-tdep.c, osfsolib.c: Use this stuff.
+	* convex-xdep.c, convex-tdep.c: Add FIXME's (getting the Convex
+	signal code stuff right with the new signals would be non-trivial).
+	* inferior.h (stop_signal): Make it enum target_signal not int.
+	* target.c, target.h (target_signal_to_string, target_signal_to_name,
+	target_signal_from_name): New functions.
+	* inftarg.c, target.h (target_signal_to_host, target_signal_from_host,
+	store_waitstatus): New functions.
+	* procfs.c (procfs_notice_signals): Use them.
+	* i960-tdep.c (i960_fault_to_signal): New function, to replace
+	print_fault.
+	* config/i960/tm-i960.h: Don't define PRINT_RANDOM_SIGNAL.
+
+	* objfiles.c (build_objfile_section_table): Don't abort() if
+	objfile->sections is already set.
+
+	* objfiles.c (add_to_objfile_sections): Check SEC_ALLOC not SEC_LOAD
+	to match recent change to exec.c.
+
+	* Version 4.11.3.
+
+	* main.c (print_gdb_version): Change year to 1994.
+
+	* ChangeLog, ChangeLog-93: Split ChangeLog at 1994.
+	* Makefile.in (NONSRC): Add ChangeLog-93.
+
+Mon Jan  3 11:57:29 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* stabsread.c (read_type): Allow defining several type numbers
+	at once (e.g. "(1,2)=(3,4)="...).
+
+	* stabsread.c (read_enum_type): Use TARGET_INT_BIT not sizeof (int).
+
+	* breakpoint.c (frame_in_dummy): Check PC as well as frame.
+
+Mon Jan  3 02:47:03 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* mdebugread.c (psymtab_to_symtab_1):  Only pass N_STAB symbols
+	to process_one_symbol.
+	* symtab.c (find_pc_psymbol):  Search global_psymbols as well to
+	avoid caching a bad endaddr in find_pc_partial_function.
+
+Sun Jan  2 21:41:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
+
+	* config/m68k/tm-sun3.h: Don't define BELIEVE_PCC_PROMOTION.
+
+Sat Jan  1 04:35:23 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
+
+	* infrun.c (wait_for_inferior):  Do not step or step resume past
+	the end of a one-line function we just stepped into.
+
+For older changes see ChangeLog-93
+
+Local Variables:
+mode: indented-text
+left-margin: 8
+fill-column: 74
+version-control: never
+End: