* acinclude.m4: Include libtool and gettext macros from the

top level.
* aclocal.m4, configure: Rebuilt.

4 files changed, 879 insertions, 1058 deletions

diff --git a/gas/ChangeLog b/gas/ChangeLog
index c998a5f..31e214d 100644
--- a/gas/ChangeLog
+++ b/gas/ChangeLog
@@ -1,3 +1,9 @@
+2000-08-31  Alexandre Oliva  <aoliva@redhat.com>
+
+	* acinclude.m4: Include libtool and gettext macros from the
+	top level.
+	* aclocal.m4, configure: Rebuilt.
+
 2000-08-30  Mark Hatle  <mhatle@mvista.com>
 
 	* config/tc-ppc.c (md_parse_option): Recognize -m405.
diff --git a/gas/acinclude.m4 b/gas/acinclude.m4
index 31a2c16..f16eefc 100644
--- a/gas/acinclude.m4
+++ b/gas/acinclude.m4
@@ -54,3 +54,19 @@ for _gas_uniq_i in _gas_uniq_dummy [$]_gas_uniq_list ; do
 done
 $1=[$]_gas_uniq_newlist
 ])dnl
+
+sinclude(../libtool.m4)
+dnl The lines below arrange for aclocal not to bring libtool.m4
+dnl AM_PROG_LIBTOOL into aclocal.m4, while still arranging for automake
+dnl to add a definition of LIBTOOL to Makefile.in.
+ifelse(yes,no,[
+AC_DEFUN([AM_PROG_LIBTOOL],)
+AC_DEFUN([AC_CHECK_LIBM],)
+AC_SUBST(LIBTOOL)
+])
+
+sinclude(../gettext.m4)
+ifelse(yes,no,[
+AC_DEFUN([CY_WITH_NLS],)
+AC_SUBST(INTLLIBS)
+])
diff --git a/gas/aclocal.m4 b/gas/aclocal.m4
index 2ae06cf..2a3ccb7 100644
--- a/gas/aclocal.m4
+++ b/gas/aclocal.m4
@@ -67,6 +67,22 @@ done
 $1=[$]_gas_uniq_newlist
 ])dnl
 
+sinclude(../libtool.m4)
+dnl The lines below arrange for aclocal not to bring libtool.m4
+dnl AM_PROG_LIBTOOL into aclocal.m4, while still arranging for automake
+dnl to add a definition of LIBTOOL to Makefile.in.
+ifelse(yes,no,[
+AC_DEFUN([AM_PROG_LIBTOOL],)
+AC_DEFUN([AC_CHECK_LIBM],)
+AC_SUBST(LIBTOOL)
+])
+
+sinclude(../gettext.m4)
+ifelse(yes,no,[
+AC_DEFUN([CY_WITH_NLS],)
+AC_SUBST(INTLLIBS)
+])
+
 # Do all the work for Automake.  This macro actually does too much --
 # some checks are only needed if your package does certain things.
 # But this isn't really a big deal.
@@ -159,410 +175,6 @@ else
 fi
 AC_SUBST($1)])
 
-
-# serial 40 AC_PROG_LIBTOOL
-AC_DEFUN(AC_PROG_LIBTOOL,
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-
-# Save cache, so that ltconfig can load it
-AC_CACHE_SAVE
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
-DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
-|| AC_MSG_ERROR([libtool configure failed])
-
-# Reload cache, that may have been modified by ltconfig
-AC_CACHE_LOAD
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-AC_DEFUN(AC_LIBTOOL_SETUP,
-[AC_PREREQ(2.13)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_RANLIB])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-dnl
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
-[libtool_flags="$libtool_flags --enable-dlopen"])
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[libtool_flags="$libtool_flags --enable-win32-dll"])
-AC_ARG_ENABLE(libtool-lock,
-  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case "$host" in
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case "`/usr/bin/file conftest.o`" in
-    *32-bit*)
-      LD="${LD-ld} -32"
-      ;;
-    *N32*)
-      LD="${LD-ld} -n32"
-      ;;
-    *64-bit*)
-      LD="${LD-ld} -64"
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw*)
-  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-  AC_CHECK_TOOL(AS, as, false)
-  AC_CHECK_TOOL(OBJDUMP, objdump, false)
-  ;;
-])
-esac
-])
-
-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
-AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
-
-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
-AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
-
-# AC_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN(AC_ENABLE_SHARED, [dnl
-define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(shared,
-changequote(<<, >>)dnl
-<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
-  enable_shared=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_shared=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
-])
-
-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)])
-
-# AC_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN(AC_ENABLE_STATIC, [dnl
-define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(static,
-changequote(<<, >>)dnl
-<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
-  enable_static=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_static=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
-])
-
-# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)])
-
-
-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
-#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
-#   `yes'.
-AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
-define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(fast-install,
-changequote(<<, >>)dnl
-<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
-  enable_fast_install=no
-  # Look at the argument we got.  We use all the common list separators.
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
-  for pkg in $enableval; do
-    if test "X$pkg" = "X$p"; then
-      enable_fast_install=yes
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac],
-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
-])
-
-# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)])
-
-# AC_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN(AC_PROG_LD,
-[AC_ARG_WITH(gnu-ld,
-[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$ac_cv_prog_gcc" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by GCC])
-  ac_prog=`($CC -print-prog-name=ld) 2>&5`
-  case "$ac_prog" in
-    # Accept absolute paths.
-changequote(,)dnl
-    [\\/]* | [A-Za-z]:[\\/]*)
-      re_direlt='/[^/][^/]*/\.\./'
-changequote([,])dnl
-      # Canonicalize the path of ld
-      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
-      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(ac_cv_path_LD,
-[if test -z "$LD"; then
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      ac_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" != no && break
-      else
-	test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-else
-  ac_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$ac_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])
-
-AC_DEFUN(AC_PROG_LD_GNU,
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
-  ac_cv_prog_gnu_ld=yes
-else
-  ac_cv_prog_gnu_ld=no
-fi])
-])
-
-# AC_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN(AC_PROG_NM,
-[AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(ac_cv_path_NM,
-[if test -n "$NM"; then
-  # Let the user override the test.
-  ac_cv_path_NM="$NM"
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
-  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
-      # Check to see if the nm accepts a BSD-compat flag.
-      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
-      #   nm: unknown option "B" ignored
-      if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	ac_cv_path_NM="$ac_dir/nm -B"
-	break
-      elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	ac_cv_path_NM="$ac_dir/nm -p"
-	break
-      else
-	ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
-	continue # so that we can try to find one that supports BSD flags
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
-fi])
-NM="$ac_cv_path_NM"
-AC_MSG_RESULT([$NM])
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN(AC_CHECK_LIBM,
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case "$host" in
-*-*-beos* | *-*-cygwin*)
-  # These system don't have libm
-  ;;
-*-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
-  ;;
-*)
-  AC_CHECK_LIB(m, main, LIBM="-lm")
-  ;;
-esac
-])
-
-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library, adds --enable-ltdl-convenience to
-# the configure arguments.  Note that LIBLTDL is not AC_SUBSTed, nor
-# is AC_CONFIG_SUBDIRS called.  If DIR is not provided, it is assumed
-# to be `${top_builddir}/libltdl'.  Make sure you start DIR with
-# '${top_builddir}/' (note the single quotes!) if your package is not
-# flat, and, if you're not using automake, define top_builddir as
-# appropriate in the Makefiles.
-AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  case "$enable_ltdl_convenience" in
-  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
-  "") enable_ltdl_convenience=yes
-      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
-  esac
-  LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
-  INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
-])
-
-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library, and adds --enable-ltdl-install to
-# the configure arguments.  Note that LIBLTDL is not AC_SUBSTed, nor
-# is AC_CONFIG_SUBDIRS called.  If DIR is not provided, it is assumed
-# to be `${top_builddir}/libltdl'.  Make sure you start DIR with
-# '${top_builddir}/' (note the single quotes!) if your package is not
-# flat, and, if you're not using automake, define top_builddir as
-# appropriate in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-  AC_CHECK_LIB(ltdl, main,
-  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
-  [if test x"$enable_ltdl_install" = xno; then
-     AC_MSG_WARN([libltdl not installed, but installation disabled])
-   else
-     enable_ltdl_install=yes
-   fi
-  ])
-  if test x"$enable_ltdl_install" = x"yes"; then
-    ac_configure_args="$ac_configure_args --enable-ltdl-install"
-    LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
-    INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
-  else
-    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
-    LIBLTDL="-lltdl"
-    INCLTDL=
-  fi
-])
-
-dnl old names
-AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
-AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
-AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
-AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
-AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
-AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
-AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
-
-dnl This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])dnl
-
 # Like AC_CONFIG_HEADER, but automatically create stamp file.
 
 AC_DEFUN(AM_CONFIG_HEADER,
@@ -595,351 +207,6 @@ AC_CHECK_PROGS(LEX, flex lex, "$missing_dir/missing flex")
 AC_PROG_LEX
 AC_DECL_YYTEXT])
 
-# This file is derived from `gettext.m4'.  The difference is that the
-# included macros assume Cygnus-style source and build trees.
-
-# Macro to add for using GNU gettext.
-# Ulrich Drepper <drepper@cygnus.com>, 1995.
-#
-# This file file be copied and used freely without restrictions.  It can
-# be used in projects which are not available under the GNU Public License
-# but which still want to provide support for the GNU gettext functionality.
-# Please note that the actual code is *not* freely available.
-
-# serial 3
-
-AC_DEFUN(CY_WITH_NLS,
-  [AC_MSG_CHECKING([whether NLS is requested])
-    dnl Default is enabled NLS
-    AC_ARG_ENABLE(nls,
-      [  --disable-nls           do not use Native Language Support],
-      USE_NLS=$enableval, USE_NLS=yes)
-    AC_MSG_RESULT($USE_NLS)
-    AC_SUBST(USE_NLS)
-
-    USE_INCLUDED_LIBINTL=no
-
-    dnl If we use NLS figure out what method
-    if test "$USE_NLS" = "yes"; then
-      AC_DEFINE(ENABLE_NLS, 1, [Define to 1 if NLS is requested])
-      AC_MSG_CHECKING([whether included gettext is requested])
-      AC_ARG_WITH(included-gettext,
-        [  --with-included-gettext use the GNU gettext library included here],
-        nls_cv_force_use_gnu_gettext=$withval,
-        nls_cv_force_use_gnu_gettext=no)
-      AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
-
-      nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
-      if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
-        dnl User does not insist on using GNU NLS library.  Figure out what
-        dnl to use.  If gettext or catgets are available (in this order) we
-        dnl use this.  Else we have to fall back to GNU NLS library.
-	dnl catgets is only used if permitted by option --with-catgets.
-	nls_cv_header_intl=
-	nls_cv_header_libgt=
-	CATOBJEXT=NONE
-
-	AC_CHECK_HEADER(libintl.h,
-	  [AC_CACHE_CHECK([for gettext in libc], gt_cv_func_gettext_libc,
-	    [AC_TRY_LINK([#include <libintl.h>], [return (int) gettext ("")],
-	       gt_cv_func_gettext_libc=yes, gt_cv_func_gettext_libc=no)])
-
-	   if test "$gt_cv_func_gettext_libc" != "yes"; then
-	     AC_CHECK_LIB(intl, bindtextdomain,
-	       [AC_CACHE_CHECK([for gettext in libintl],
-		 gt_cv_func_gettext_libintl,
-		 [AC_TRY_LINK([], [return (int) gettext ("")],
-		 gt_cv_func_gettext_libintl=yes,
-		 gt_cv_func_gettext_libintl=no)])])
-	   fi
-
-	   if test "$gt_cv_func_gettext_libc" = "yes" \
-	      || test "$gt_cv_func_gettext_libintl" = "yes"; then
-	      AC_DEFINE(HAVE_GETTEXT, 1,
-			[Define as 1 if you have gettext and don't want to use GNU gettext.])
-	      AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
-		[test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
-	      if test "$MSGFMT" != "no"; then
-		AC_CHECK_FUNCS(dcgettext)
-		AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
-		AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
-		  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
-		AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
-			       return _nl_msg_cat_cntr],
-		  [CATOBJEXT=.gmo
-		   DATADIRNAME=share],
-		  [CATOBJEXT=.mo
-		   DATADIRNAME=lib])
-		INSTOBJEXT=.mo
-	      fi
-	    fi
-	])
-
-	dnl In the standard gettext, we would now check for catgets.
-        dnl However, we never want to use catgets for our releases.
-
-        if test "$CATOBJEXT" = "NONE"; then
-	  dnl Neither gettext nor catgets in included in the C library.
-	  dnl Fall back on GNU gettext library.
-	  nls_cv_use_gnu_gettext=yes
-        fi
-      fi
-
-      if test "$nls_cv_use_gnu_gettext" = "yes"; then
-        dnl Mark actions used to generate GNU NLS library.
-        INTLOBJS="\$(GETTOBJS)"
-        AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
-	  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt)
-        AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
-        AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
-	  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
-        AC_SUBST(MSGFMT)
-	USE_INCLUDED_LIBINTL=yes
-        CATOBJEXT=.gmo
-        INSTOBJEXT=.mo
-        DATADIRNAME=share
-	INTLDEPS='$(top_builddir)/../intl/libintl.a'
-	INTLLIBS=$INTLDEPS
-	LIBS=`echo $LIBS | sed -e 's/-lintl//'`
-        nls_cv_header_intl=libintl.h
-        nls_cv_header_libgt=libgettext.h
-      fi
-
-      dnl Test whether we really found GNU xgettext.
-      if test "$XGETTEXT" != ":"; then
-	dnl If it is no GNU xgettext we define it as : so that the
-	dnl Makefiles still can work.
-	if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
-	  : ;
-	else
-	  AC_MSG_RESULT(
-	    [found xgettext programs is not GNU xgettext; ignore it])
-	  XGETTEXT=":"
-	fi
-      fi
-
-      # We need to process the po/ directory.
-      POSUB=po
-    else
-      DATADIRNAME=share
-      nls_cv_header_intl=libintl.h
-      nls_cv_header_libgt=libgettext.h
-    fi
-
-    # If this is used in GNU gettext we have to set USE_NLS to `yes'
-    # because some of the sources are only built for this goal.
-    if test "$PACKAGE" = gettext; then
-      USE_NLS=yes
-      USE_INCLUDED_LIBINTL=yes
-    fi
-
-    dnl These rules are solely for the distribution goal.  While doing this
-    dnl we only have to keep exactly one list of the available catalogs
-    dnl in configure.in.
-    for lang in $ALL_LINGUAS; do
-      GMOFILES="$GMOFILES $lang.gmo"
-      POFILES="$POFILES $lang.po"
-    done
-
-    dnl Make all variables we use known to autoconf.
-    AC_SUBST(USE_INCLUDED_LIBINTL)
-    AC_SUBST(CATALOGS)
-    AC_SUBST(CATOBJEXT)
-    AC_SUBST(DATADIRNAME)
-    AC_SUBST(GMOFILES)
-    AC_SUBST(INSTOBJEXT)
-    AC_SUBST(INTLDEPS)
-    AC_SUBST(INTLLIBS)
-    AC_SUBST(INTLOBJS)
-    AC_SUBST(POFILES)
-    AC_SUBST(POSUB)
-  ])
-
-AC_DEFUN(CY_GNU_GETTEXT,
-  [AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-   AC_REQUIRE([AC_PROG_CC])dnl
-   AC_REQUIRE([AC_PROG_RANLIB])dnl
-   AC_REQUIRE([AC_ISC_POSIX])dnl
-   AC_REQUIRE([AC_HEADER_STDC])dnl
-   AC_REQUIRE([AC_C_CONST])dnl
-   AC_REQUIRE([AC_C_INLINE])dnl
-   AC_REQUIRE([AC_TYPE_OFF_T])dnl
-   AC_REQUIRE([AC_TYPE_SIZE_T])dnl
-   AC_REQUIRE([AC_FUNC_ALLOCA])dnl
-   AC_REQUIRE([AC_FUNC_MMAP])dnl
-
-   AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \
-unistd.h values.h sys/param.h])
-   AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
-__argz_count __argz_stringify __argz_next])
-
-   if test "${ac_cv_func_stpcpy+set}" != "set"; then
-     AC_CHECK_FUNCS(stpcpy)
-   fi
-   if test "${ac_cv_func_stpcpy}" = "yes"; then
-     AC_DEFINE(HAVE_STPCPY, 1, [Define if you have the stpcpy function])
-   fi
-
-   AM_LC_MESSAGES
-   CY_WITH_NLS
-
-   if test "x$CATOBJEXT" != "x"; then
-     if test "x$ALL_LINGUAS" = "x"; then
-       LINGUAS=
-     else
-       AC_MSG_CHECKING(for catalogs to be installed)
-       NEW_LINGUAS=
-       for lang in ${LINGUAS=$ALL_LINGUAS}; do
-         case "$ALL_LINGUAS" in
-          *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
-         esac
-       done
-       LINGUAS=$NEW_LINGUAS
-       AC_MSG_RESULT($LINGUAS)
-     fi
-
-     dnl Construct list of names of catalog files to be constructed.
-     if test -n "$LINGUAS"; then
-       for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
-     fi
-   fi
-
-   dnl The reference to <locale.h> in the installed <libintl.h> file
-   dnl must be resolved because we cannot expect the users of this
-   dnl to define HAVE_LOCALE_H.
-   if test $ac_cv_header_locale_h = yes; then
-     INCLUDE_LOCALE_H="#include <locale.h>"
-   else
-     INCLUDE_LOCALE_H="\
-/* The system does not provide the header <locale.h>.  Take care yourself.  */"
-   fi
-   AC_SUBST(INCLUDE_LOCALE_H)
-
-   dnl Determine which catalog format we have (if any is needed)
-   dnl For now we know about two different formats:
-   dnl   Linux libc-5 and the normal X/Open format
-   if test -f $srcdir/po2tbl.sed.in; then
-      if test "$CATOBJEXT" = ".cat"; then
-	 AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen)
-
-	 dnl Transform the SED scripts while copying because some dumb SEDs
-         dnl cannot handle comments.
-	 sed -e '/^#/d' $srcdir/$msgformat-msg.sed > po2msg.sed
-      fi
-      dnl po2tbl.sed is always needed.
-      sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
-	 $srcdir/po2tbl.sed.in > po2tbl.sed
-   fi
-
-   dnl In the intl/Makefile.in we have a special dependency which makes
-   dnl only sense for gettext.  We comment this out for non-gettext
-   dnl packages.
-   if test "$PACKAGE" = "gettext"; then
-     GT_NO="#NO#"
-     GT_YES=
-   else
-     GT_NO=
-     GT_YES="#YES#"
-   fi
-   AC_SUBST(GT_NO)
-   AC_SUBST(GT_YES)
-
-   MKINSTALLDIRS="\$(srcdir)/../../mkinstalldirs"
-   AC_SUBST(MKINSTALLDIRS)
-
-   dnl *** For now the libtool support in intl/Makefile is not for real.
-   l=
-   AC_SUBST(l)
-
-   dnl Generate list of files to be processed by xgettext which will
-   dnl be included in po/Makefile.  But only do this if the po directory
-   dnl exists in srcdir.
-   if test -d $srcdir/po; then
-      test -d po || mkdir po
-      if test "x$srcdir" != "x."; then
-	 if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
-	    posrcprefix="$srcdir/"
-	 else
-	    posrcprefix="../$srcdir/"
-	 fi
-      else
-	 posrcprefix="../"
-      fi
-      rm -f po/POTFILES
-      sed -e "/^#/d" -e "/^\$/d" -e "s,.*,	$posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
-	 < $srcdir/po/POTFILES.in > po/POTFILES
-   fi
-  ])
-
-# Search path for a program which passes the given test.
-# Ulrich Drepper <drepper@cygnus.com>, 1996.
-#
-# This file file be copied and used freely without restrictions.  It can
-# be used in projects which are not available under the GNU Public License
-# but which still want to provide support for the GNU gettext functionality.
-# Please note that the actual code is *not* freely available.
-
-# serial 1
-
-dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
-dnl   TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
-AC_DEFUN(AM_PATH_PROG_WITH_TEST,
-[# Extract the first word of "$2", so it can be a program name with args.
-set dummy $2; ac_word=[$]2
-AC_MSG_CHECKING([for $ac_word])
-AC_CACHE_VAL(ac_cv_path_$1,
-[case "[$]$1" in
-  /*)
-  ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
-  ;;
-  *)
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
-  for ac_dir in ifelse([$5], , $PATH, [$5]); do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      if [$3]; then
-	ac_cv_path_$1="$ac_dir/$ac_word"
-	break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-dnl If no 4th arg is given, leave the cache variable unset,
-dnl so AC_PATH_PROGS will keep looking.
-ifelse([$4], , , [  test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
-])dnl
-  ;;
-esac])dnl
-$1="$ac_cv_path_$1"
-if test -n "[$]$1"; then
-  AC_MSG_RESULT([$]$1)
-else
-  AC_MSG_RESULT(no)
-fi
-AC_SUBST($1)dnl
-])
-
-# Check whether LC_MESSAGES is available in <locale.h>.
-# Ulrich Drepper <drepper@cygnus.com>, 1995.
-#
-# This file file be copied and used freely without restrictions.  It can
-# be used in projects which are not available under the GNU Public License
-# but which still want to provide support for the GNU gettext functionality.
-# Please note that the actual code is *not* freely available.
-
-# serial 1
-
-AC_DEFUN(AM_LC_MESSAGES,
-  [if test $ac_cv_header_locale_h = yes; then
-    AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
-      [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
-       am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
-    if test $am_cv_val_LC_MESSAGES = yes; then
-      AC_DEFINE(HAVE_LC_MESSAGES, 1,
-		[Define if your locale.h file contains LC_MESSAGES.])
-    fi
-  fi])
-
 # Add --enable-maintainer-mode option to configure.
 # From Jim Meyering
 
diff --git a/gas/configure b/gas/configure
index 87c21b2..8bba60c 100755
--- a/gas/configure
+++ b/gas/configure
@@ -22,6 +22,8 @@ ac_help="$ac_help
 ac_help="$ac_help
   --disable-libtool-lock  avoid locking (might break parallel builds)"
 ac_help="$ac_help
+  --with-pic              try to use only PIC/non-PIC objects [default=use both]"
+ac_help="$ac_help
   --enable-bfd-assembler  use BFD back end for writing object files"
 ac_help="$ac_help
     targets            alternative target configurations besides the primary"
@@ -545,6 +547,68 @@ else
   ac_n= ac_c='\c' ac_t=
 fi
 
+echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
+echo "configure:552: checking for Cygwin environment" >&5
+if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 557 "configure"
+#include "confdefs.h"
+
+int main() {
+
+#ifndef __CYGWIN__
+#define __CYGWIN__ __CYGWIN32__
+#endif
+return __CYGWIN__;
+; return 0; }
+EOF
+if { (eval echo configure:568: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  ac_cv_cygwin=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_cygwin=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_cygwin" 1>&6
+CYGWIN=
+test "$ac_cv_cygwin" = yes && CYGWIN=yes
+echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
+echo "configure:585: checking for mingw32 environment" >&5
+if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 590 "configure"
+#include "confdefs.h"
+
+int main() {
+return __MINGW32__;
+; return 0; }
+EOF
+if { (eval echo configure:597: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  rm -rf conftest*
+  ac_cv_mingw32=yes
+else
+  echo "configure: failed program was:" >&5
+  cat conftest.$ac_ext >&5
+  rm -rf conftest*
+  ac_cv_mingw32=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_mingw32" 1>&6
+MINGW32=
+test "$ac_cv_mingw32" = yes && MINGW32=yes
 
 
 ac_aux_dir=
@@ -594,7 +658,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:598: checking host system type" >&5
+echo "configure:662: checking host system type" >&5
 
 host_alias=$host
 case "$host_alias" in
@@ -615,7 +679,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$host" 1>&6
 
 echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:619: checking target system type" >&5
+echo "configure:683: checking target system type" >&5
 
 target_alias=$target
 case "$target_alias" in
@@ -633,7 +697,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$target" 1>&6
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:637: checking build system type" >&5
+echo "configure:701: checking build system type" >&5
 
 build_alias=$build
 case "$build_alias" in
@@ -668,7 +732,7 @@ test "$host_alias" != "$target_alias" &&
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:672: checking for a BSD compatible install" >&5
+echo "configure:736: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -721,7 +785,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
 echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:725: checking whether build environment is sane" >&5
+echo "configure:789: checking whether build environment is sane" >&5
 # Just in case
 sleep 1
 echo timestamp > conftestfile
@@ -778,7 +842,7 @@ test "$program_suffix" != NONE &&
 test "$program_transform_name" = "" && program_transform_name="s,x,x,"
 
 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:782: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:846: checking whether ${MAKE-make} sets \${MAKE}" >&5
 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -824,7 +888,7 @@ EOF
 
 missing_dir=`cd $ac_aux_dir && pwd`
 echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:828: checking for working aclocal" >&5
+echo "configure:892: checking for working aclocal" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -837,7 +901,7 @@ else
 fi
 
 echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:841: checking for working autoconf" >&5
+echo "configure:905: checking for working autoconf" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -850,7 +914,7 @@ else
 fi
 
 echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:854: checking for working automake" >&5
+echo "configure:918: checking for working automake" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -863,7 +927,7 @@ else
 fi
 
 echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:867: checking for working autoheader" >&5
+echo "configure:931: checking for working autoheader" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -876,7 +940,7 @@ else
 fi
 
 echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:880: checking for working makeinfo" >&5
+echo "configure:944: checking for working makeinfo" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -959,40 +1023,10 @@ else
   enable_fast_install=yes
 fi
 
-# Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:966: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  if test -n "$RANLIB"; then
-  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
-  ac_dummy="$PATH"
-  for ac_dir in $ac_dummy; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$ac_word; then
-      ac_cv_prog_RANLIB="ranlib"
-      break
-    fi
-  done
-  IFS="$ac_save_ifs"
-  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
-  echo "$ac_t""$RANLIB" 1>&6
-else
-  echo "$ac_t""no" 1>&6
-fi
-
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:996: checking for $ac_word" >&5
+echo "configure:1030: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1022,7 +1056,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1026: checking for $ac_word" >&5
+echo "configure:1060: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1073,7 +1107,7 @@ fi
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1077: checking for $ac_word" >&5
+echo "configure:1111: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1105,7 +1139,7 @@ fi
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1109: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1143: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -1116,12 +1150,12 @@ cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 1120 "configure"
+#line 1154 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:1125: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1159: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -1147,12 +1181,12 @@ if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1151: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1185: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1156: checking whether we are using GNU C" >&5
+echo "configure:1190: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1161,7 +1195,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1165: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1199: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -1180,7 +1214,7 @@ ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1184: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1218: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1223,8 +1257,14 @@ ac_prog=ld
 if test "$ac_cv_prog_gcc" = yes; then
   # Check if gcc -print-prog-name=ld gives a path.
   echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1227: checking for ld used by GCC" >&5
-  ac_prog=`($CC -print-prog-name=ld) 2>&5`
+echo "configure:1261: checking for ld used by GCC" >&5
+  case $host in
+  *-*-mingw*)
+    # gcc leaves a trailing carriage return which upsets mingw
+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+  *)
+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+  esac
   case "$ac_prog" in
     # Accept absolute paths.
     [\\/]* | [A-Za-z]:[\\/]*)
@@ -1247,10 +1287,10 @@ echo "configure:1227: checking for ld used by GCC" >&5
   esac
 elif test "$with_gnu_ld" = yes; then
   echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1251: checking for GNU ld" >&5
+echo "configure:1291: checking for GNU ld" >&5
 else
   echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1254: checking for non-GNU ld" >&5
+echo "configure:1294: checking for non-GNU ld" >&5
 fi
 if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1285,7 +1325,7 @@ else
 fi
 test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
 echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1289: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1329: checking if the linker ($LD) is GNU ld" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1298,10 +1338,23 @@ fi
 fi
 
 echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
+with_gnu_ld=$ac_cv_prog_gnu_ld
+
+
+echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
+echo "configure:1346: checking for $LD option to reload object files" >&5
+if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  lt_cv_ld_reload_flag='-r'
+fi
 
+echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
+reload_flag=$lt_cv_ld_reload_flag
+test -n "$reload_flag" && reload_flag=" $reload_flag"
 
 echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1305: checking for BSD-compatible nm" >&5
+echo "configure:1358: checking for BSD-compatible nm" >&5
 if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1312,18 +1365,19 @@ else
   IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
   for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
     test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
+    tmp_nm=$ac_dir/${ac_tool_prefix}nm
+    if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
       # Check to see if the nm accepts a BSD-compat flag.
       # Adding the `sed 1q' prevents false positives on HP-UX, which says:
       #   nm: unknown option "B" ignored
-      if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	ac_cv_path_NM="$ac_dir/nm -B"
+      if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+	ac_cv_path_NM="$tmp_nm -B"
 	break
-      elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
-	ac_cv_path_NM="$ac_dir/nm -p"
+      elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+	ac_cv_path_NM="$tmp_nm -p"
 	break
       else
-	ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
+	ac_cv_path_NM=${ac_cv_path_NM="$tmp_nm"} # keep the first match, but
 	continue # so that we can try to find one that supports BSD flags
       fi
     fi
@@ -1337,7 +1391,7 @@ NM="$ac_cv_path_NM"
 echo "$ac_t""$NM" 1>&6
 
 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1341: checking whether ln -s works" >&5
+echo "configure:1395: checking whether ln -s works" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1357,6 +1411,481 @@ else
   echo "$ac_t""no" 1>&6
 fi
 
+echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
+echo "configure:1416: checking how to recognise dependant libraries" >&5
+if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  lt_cv_file_magic_cmd='${MAGIC}'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [regex]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given egrep regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case "$host_os" in
+aix4*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+beos*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+bsdi4*)
+    lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+    lt_cv_file_magic_cmd='/usr/bin/file -L'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  ;;
+
+cygwin* | mingw*)
+  lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+  lt_cv_file_magic_cmd='${OBJDUMP} -f'
+  ;;
+
+freebsd* )
+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+    case "$host_cpu" in
+    i*86 )
+            lt_cv_deplibs_check_method=='file_magic OpenBSD/i[3-9]86 demand paged shared library'
+            lt_cv_file_magic_cmd=/usr/bin/file
+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+      ;;
+    esac
+  else
+    lt_cv_deplibs_check_method=pass_all
+  fi
+  ;;
+
+gnu*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+hpux10.20*)
+  # TODO:  Does this work for hpux-11 too?
+  lt_cv_deplibs_check_method='file_magic (s0-90-90-9|PA-RISC0-9.0-9) shared library'
+  lt_cv_file_magic_cmd=/usr/bin/file
+  lt_cv_file_magic_test_file=/usr/lib/libc.sl
+  ;;
+
+irix5* | irix6*)
+  case "$host_os" in
+  irix5*)
+    # this will be overridden with pass_all, but let us keep it just in case
+    lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+    ;;
+  *)
+    case "$LD" in
+    *-32|*"-32 ") libmagic=32-bit;;
+    *-n32|*"-n32 ") libmagic=N32;;
+    *-64|*"-64 ") libmagic=64-bit;;
+    *) libmagic=never-match;;
+    esac
+    # this will be overridden with pass_all, but let us keep it just in case
+        lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
+        ;;
+  esac
+  lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+# This must be Linux ELF.
+linux*)
+  case "$host_cpu" in
+  alpha* | i*86 | powerpc* | sparc* | ia64* )
+    lt_cv_deplibs_check_method=pass_all ;;
+  *)
+    # glibc up to 2.1.1 does not perform some relocations on ARM
+        lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
+      esac
+  lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+  ;;
+
+netbsd*)
+  if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then :
+  else
+        lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'
+        lt_cv_file_magic_cmd='/usr/bin/file -L'
+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+  fi
+  ;;
+
+osf3* | osf4* | osf5*)
+  # this will be overridden with pass_all, but let us keep it just in case
+  lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
+  lt_cv_file_magic_test_file=/shlib/libc.so
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+sco3.2v5*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
+solaris*)
+  lt_cv_deplibs_check_method=pass_all
+  lt_cv_file_magic_test_file=/lib/libc.so
+  ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+  case "$host_vendor" in
+  ncr)
+    lt_cv_deplibs_check_method=pass_all
+    ;;
+  motorola)
+        lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+        lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+    ;;
+  esac
+  ;;
+esac
+
+fi
+
+echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+
+echo $ac_n "checking for object suffix""... $ac_c" 1>&6
+echo "configure:1557: checking for object suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  rm -f conftest*
+echo 'int i = 1;' > conftest.$ac_ext
+if { (eval echo configure:1563: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  for ac_file in conftest.*; do
+    case $ac_file in
+    *.c) ;;
+    *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
+    esac
+  done
+else
+  { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_objext" 1>&6
+OBJEXT=$ac_cv_objext
+ac_objext=$ac_cv_objext
+
+
+
+echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
+echo "configure:1583: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
+  ac_cv_exeext=.exe
+else
+  rm -f conftest*
+  echo 'int main () { return 0; }' > conftest.$ac_ext
+  ac_cv_exeext=
+  if { (eval echo configure:1593: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+    for file in conftest.*; do
+      case $file in
+      *.c | *.o | *.obj) ;;
+      *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
+      esac
+    done
+  else
+    { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
+  fi
+  rm -f conftest*
+  test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
+fi
+fi
+
+EXEEXT=""
+test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
+echo "$ac_t""${ac_cv_exeext}" 1>&6
+ac_exeext=$EXEEXT
+
+if test $host != $build; then
+  ac_tool_prefix=${host_alias}-
+else
+  ac_tool_prefix=
+fi
+
+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
+
+# Only perform the check for file, if the check method requires it
+case "$deplibs_check_method" in
+file_magic*)
+  if test "$file_magic_cmd" = '${MAGIC}'; then
+    echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
+echo "configure:1626: checking for ${ac_tool_prefix}file" >&5
+if eval "test \"`echo '$''{'lt_cv_path_MAGIC'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  case "$MAGIC" in
+  /*)
+  lt_cv_path_MAGIC="$MAGIC" # Let the user override the test with a path.
+  ;;
+  ?:/*)
+  ac_cv_path_MAGIC="$MAGIC" # Let the user override the test with a dos path.
+  ;;
+  *)
+  ac_save_MAGIC="$MAGIC"
+  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="/usr/bin:$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/${ac_tool_prefix}file; then
+      lt_cv_path_MAGIC="$ac_dir/${ac_tool_prefix}file"
+      if test -n "$file_magic_test_file"; then
+	case "$deplibs_check_method" in
+	"file_magic "*)
+	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+	  MAGIC="$lt_cv_path_MAGIC"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    egrep "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  MAGIC="$ac_save_MAGIC"
+  ;;
+esac
+fi
+
+MAGIC="$lt_cv_path_MAGIC"
+if test -n "$MAGIC"; then
+  echo "$ac_t""$MAGIC" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$lt_cv_path_MAGIC"; then
+  if test -n "$ac_tool_prefix"; then
+    echo $ac_n "checking for file""... $ac_c" 1>&6
+echo "configure:1688: checking for file" >&5
+if eval "test \"`echo '$''{'lt_cv_path_MAGIC'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  case "$MAGIC" in
+  /*)
+  lt_cv_path_MAGIC="$MAGIC" # Let the user override the test with a path.
+  ;;
+  ?:/*)
+  ac_cv_path_MAGIC="$MAGIC" # Let the user override the test with a dos path.
+  ;;
+  *)
+  ac_save_MAGIC="$MAGIC"
+  IFS="${IFS=   }"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="/usr/bin:$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/file; then
+      lt_cv_path_MAGIC="$ac_dir/file"
+      if test -n "$file_magic_test_file"; then
+	case "$deplibs_check_method" in
+	"file_magic "*)
+	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+	  MAGIC="$lt_cv_path_MAGIC"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    egrep "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+	  fi ;;
+	esac
+      fi
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  MAGIC="$ac_save_MAGIC"
+  ;;
+esac
+fi
+
+MAGIC="$lt_cv_path_MAGIC"
+if test -n "$MAGIC"; then
+  echo "$ac_t""$MAGIC" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+  else
+    MAGIC=:
+  fi
+fi
+
+  fi
+  ;;
+esac
+
+# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1759: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+  echo "$ac_t""$RANLIB" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+
+if test -z "$ac_cv_prog_RANLIB"; then
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1791: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_RANLIB="ranlib"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+  echo "$ac_t""$RANLIB" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+else
+  RANLIB=":"
+fi
+fi
+
+# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1826: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+fi
+fi
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+  echo "$ac_t""$STRIP" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+
+if test -z "$ac_cv_prog_STRIP"; then
+if test -n "$ac_tool_prefix"; then
+  # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1858: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$STRIP"; then
+  ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_STRIP="strip"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
+fi
+fi
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+  echo "$ac_t""$STRIP" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
+else
+  STRIP=":"
+fi
+fi
+
 
 # Check for any special flags to pass to ltconfig.
 libtool_flags="--cache-file=$cache_file"
@@ -1376,13 +1905,24 @@ fi
 test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
 test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
 
+# Check whether --with-pic or --without-pic was given.
+if test "${with_pic+set}" = set; then
+  withval="$with_pic"
+  pic_mode="$withval"
+else
+  pic_mode=default
+fi
+
+test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
+test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
+
 # Some flags need to be propagated to the compiler or linker for good
 # libtool support.
 case "$host" in
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 1385 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:1386: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  echo '#line 1925 "configure"' > conftest.$ac_ext
+  if { (eval echo configure:1926: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
     case "`/usr/bin/file conftest.o`" in
     *32-bit*)
       LD="${LD-ld} -32"
@@ -1403,19 +1943,27 @@ case "$host" in
   SAVE_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -belf"
   echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1407: checking whether the C compiler needs -belf" >&5
+echo "configure:1947: checking whether the C compiler needs -belf" >&5
 if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
-  cat > conftest.$ac_ext <<EOF
-#line 1412 "configure"
+  
+     ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+     cat > conftest.$ac_ext <<EOF
+#line 1960 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:1419: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1967: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   lt_cv_cc_needs_belf=yes
 else
@@ -1425,6 +1973,13 @@ else
   lt_cv_cc_needs_belf=no
 fi
 rm -f conftest*
+     ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
 fi
 
 echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
@@ -1488,12 +2043,14 @@ rm -f confcache
 
 
 # Actually configure libtool.  ac_aux_dir is where install-sh is found.
-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
-DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
+AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+MAGIC="$MAGIC" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
+AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
+objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
+deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
 ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
 || { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
 
 # Reload cache, that may have been modified by ltconfig
@@ -1507,7 +2064,7 @@ fi
 
 
 # This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
+LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
 
 # Always use our own libtool.
 LIBTOOL='$(SHELL) $(top_builddir)/libtool'
@@ -1517,6 +2074,11 @@ LIBTOOL='$(SHELL) $(top_builddir)/libtool'
 exec 5>>./config.log
 
 
+  
+
+  
+	 
+
 user_bfd_gas=
 # Check whether --enable-bfd-assembler or --disable-bfd-assembler was given.
 if test "${enable_bfd_assembler+set}" = set; then
@@ -2437,7 +2999,7 @@ EOF
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2441: checking for $ac_word" >&5
+echo "configure:3003: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2467,7 +3029,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2471: checking for $ac_word" >&5
+echo "configure:3033: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2518,7 +3080,7 @@ fi
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2522: checking for $ac_word" >&5
+echo "configure:3084: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2550,7 +3112,7 @@ fi
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:2554: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:3116: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -2561,12 +3123,12 @@ cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 2565 "configure"
+#line 3127 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:2570: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3132: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -2592,12 +3154,12 @@ if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2596: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:3158: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:2601: checking whether we are using GNU C" >&5
+echo "configure:3163: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2606,7 +3168,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:2610: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:3172: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -2625,7 +3187,7 @@ ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:2629: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:3191: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2662,7 +3224,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2666: checking for $ac_word" >&5
+echo "configure:3228: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2693,7 +3255,7 @@ done
 test -n "$YACC" || YACC="yacc"
 
 echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:2697: checking how to run the C preprocessor" >&5
+echo "configure:3259: checking how to run the C preprocessor" >&5
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
@@ -2708,13 +3270,13 @@ else
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp.
   cat > conftest.$ac_ext <<EOF
-#line 2712 "configure"
+#line 3274 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2718: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3280: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -2725,13 +3287,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -E -traditional-cpp"
   cat > conftest.$ac_ext <<EOF
-#line 2729 "configure"
+#line 3291 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2735: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3297: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -2742,13 +3304,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -nologo -E"
   cat > conftest.$ac_ext <<EOF
-#line 2746 "configure"
+#line 3308 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2752: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3314: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -2778,7 +3340,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2782: checking for $ac_word" >&5
+echo "configure:3344: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2811,7 +3373,7 @@ test -n "$LEX" || LEX=""$missing_dir/missing flex""
 # Extract the first word of "flex", so it can be a program name with args.
 set dummy flex; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2815: checking for $ac_word" >&5
+echo "configure:3377: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2845,7 +3407,7 @@ then
   *) ac_lib=l ;;
   esac
   echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
-echo "configure:2849: checking for yywrap in -l$ac_lib" >&5
+echo "configure:3411: checking for yywrap in -l$ac_lib" >&5
 ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2853,7 +3415,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-l$ac_lib  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 2857 "configure"
+#line 3419 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -2864,7 +3426,7 @@ int main() {
 yywrap()
 ; return 0; }
 EOF
-if { (eval echo configure:2868: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3430: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -2887,7 +3449,7 @@ fi
 fi
 
 echo $ac_n "checking lex output file root""... $ac_c" 1>&6
-echo "configure:2891: checking lex output file root" >&5
+echo "configure:3453: checking lex output file root" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2908,7 +3470,7 @@ echo "$ac_t""$ac_cv_prog_lex_root" 1>&6
 LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root
 
 echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6
-echo "configure:2912: checking whether yytext is a pointer" >&5
+echo "configure:3474: checking whether yytext is a pointer" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2920,14 +3482,14 @@ echo 'extern char *yytext;' >>$LEX_OUTPUT_ROOT.c
 ac_save_LIBS="$LIBS"
 LIBS="$LIBS $LEXLIB"
 cat > conftest.$ac_ext <<EOF
-#line 2924 "configure"
+#line 3486 "configure"
 #include "confdefs.h"
 `cat $LEX_OUTPUT_ROOT.c`
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:2931: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3493: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_prog_lex_yytext_pointer=yes
 else
@@ -2950,8 +3512,38 @@ fi
 
 
 ALL_LINGUAS=
+# Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:3519: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  if test -n "$RANLIB"; then
+  ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS=":"
+  ac_dummy="$PATH"
+  for ac_dir in $ac_dummy; do
+    test -z "$ac_dir" && ac_dir=.
+    if test -f $ac_dir/$ac_word; then
+      ac_cv_prog_RANLIB="ranlib"
+      break
+    fi
+  done
+  IFS="$ac_save_ifs"
+  test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+  echo "$ac_t""$RANLIB" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+fi
+
 echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
-echo "configure:2955: checking for POSIXized ISC" >&5
+echo "configure:3547: checking for POSIXized ISC" >&5
 if test -d /etc/conf/kconfig.d &&
   grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
 then
@@ -2972,12 +3564,12 @@ else
 fi
 
 echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:2976: checking for ANSI C header files" >&5
+echo "configure:3568: checking for ANSI C header files" >&5
 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2981 "configure"
+#line 3573 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 #include <stdarg.h>
@@ -2985,7 +3577,7 @@ else
 #include <float.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2989: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3581: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -3002,7 +3594,7 @@ rm -f conftest*
 if test $ac_cv_header_stdc = yes; then
   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 3006 "configure"
+#line 3598 "configure"
 #include "confdefs.h"
 #include <string.h>
 EOF
@@ -3020,7 +3612,7 @@ fi
 if test $ac_cv_header_stdc = yes; then
   # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 3024 "configure"
+#line 3616 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 EOF
@@ -3041,7 +3633,7 @@ if test "$cross_compiling" = yes; then
   :
 else
   cat > conftest.$ac_ext <<EOF
-#line 3045 "configure"
+#line 3637 "configure"
 #include "confdefs.h"
 #include <ctype.h>
 #define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
@@ -3052,7 +3644,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
 exit (0); }
 
 EOF
-if { (eval echo configure:3056: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3648: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   :
 else
@@ -3076,12 +3668,12 @@ EOF
 fi
 
 echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:3080: checking for working const" >&5
+echo "configure:3672: checking for working const" >&5
 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3085 "configure"
+#line 3677 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -3130,7 +3722,7 @@ ccp = (char const *const *) p;
 
 ; return 0; }
 EOF
-if { (eval echo configure:3134: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3726: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_const=yes
 else
@@ -3151,21 +3743,21 @@ EOF
 fi
 
 echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:3155: checking for inline" >&5
+echo "configure:3747: checking for inline" >&5
 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_cv_c_inline=no
 for ac_kw in inline __inline__ __inline; do
   cat > conftest.$ac_ext <<EOF
-#line 3162 "configure"
+#line 3754 "configure"
 #include "confdefs.h"
 
 int main() {
 } $ac_kw foo() {
 ; return 0; }
 EOF
-if { (eval echo configure:3169: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3761: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_inline=$ac_kw; break
 else
@@ -3191,12 +3783,12 @@ EOF
 esac
 
 echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:3195: checking for off_t" >&5
+echo "configure:3787: checking for off_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3200 "configure"
+#line 3792 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -3224,12 +3816,12 @@ EOF
 fi
 
 echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:3228: checking for size_t" >&5
+echo "configure:3820: checking for size_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3233 "configure"
+#line 3825 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -3259,19 +3851,19 @@ fi
 # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
 # for constant arguments.  Useless!
 echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:3263: checking for working alloca.h" >&5
+echo "configure:3855: checking for working alloca.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3268 "configure"
+#line 3860 "configure"
 #include "confdefs.h"
 #include <alloca.h>
 int main() {
 char *p = alloca(2 * sizeof(int));
 ; return 0; }
 EOF
-if { (eval echo configure:3275: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3867: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_header_alloca_h=yes
 else
@@ -3292,12 +3884,12 @@ EOF
 fi
 
 echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:3296: checking for alloca" >&5
+echo "configure:3888: checking for alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3301 "configure"
+#line 3893 "configure"
 #include "confdefs.h"
 
 #ifdef __GNUC__
@@ -3325,7 +3917,7 @@ int main() {
 char *p = (char *) alloca(1);
 ; return 0; }
 EOF
-if { (eval echo configure:3329: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3921: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_func_alloca_works=yes
 else
@@ -3357,12 +3949,12 @@ EOF
 
 
 echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:3361: checking whether alloca needs Cray hooks" >&5
+echo "configure:3953: checking whether alloca needs Cray hooks" >&5
 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3366 "configure"
+#line 3958 "configure"
 #include "confdefs.h"
 #if defined(CRAY) && ! defined(CRAY2)
 webecray
@@ -3387,12 +3979,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6
 if test $ac_cv_os_cray = yes; then
 for ac_func in _getb67 GETB67 getb67; do
   echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3391: checking for $ac_func" >&5
+echo "configure:3983: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3396 "configure"
+#line 3988 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -3415,7 +4007,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:3419: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4011: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -3442,7 +4034,7 @@ done
 fi
 
 echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:3446: checking stack direction for C alloca" >&5
+echo "configure:4038: checking stack direction for C alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3450,7 +4042,7 @@ else
   ac_cv_c_stack_direction=0
 else
   cat > conftest.$ac_ext <<EOF
-#line 3454 "configure"
+#line 4046 "configure"
 #include "confdefs.h"
 find_stack_direction ()
 {
@@ -3469,7 +4061,7 @@ main ()
   exit (find_stack_direction() < 0);
 }
 EOF
-if { (eval echo configure:3473: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4065: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_stack_direction=1
 else
@@ -3494,17 +4086,17 @@ for ac_hdr in unistd.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3498: checking for $ac_hdr" >&5
+echo "configure:4090: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3503 "configure"
+#line 4095 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3508: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4100: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -3533,12 +4125,12 @@ done
 for ac_func in getpagesize
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3537: checking for $ac_func" >&5
+echo "configure:4129: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3542 "configure"
+#line 4134 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -3561,7 +4153,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:3565: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4157: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -3586,7 +4178,7 @@ fi
 done
 
 echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:3590: checking for working mmap" >&5
+echo "configure:4182: checking for working mmap" >&5
 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3594,7 +4186,7 @@ else
   ac_cv_func_mmap_fixed_mapped=no
 else
   cat > conftest.$ac_ext <<EOF
-#line 3598 "configure"
+#line 4190 "configure"
 #include "confdefs.h"
 
 /* Thanks to Mike Haertel and Jim Avera for this test.
@@ -3734,7 +4326,7 @@ main()
 }
 
 EOF
-if { (eval echo configure:3738: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:4330: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_func_mmap_fixed_mapped=yes
 else
@@ -3762,17 +4354,17 @@ unistd.h values.h sys/param.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3766: checking for $ac_hdr" >&5
+echo "configure:4358: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3771 "configure"
+#line 4363 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3776: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4368: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -3802,12 +4394,12 @@ done
 __argz_count __argz_stringify __argz_next
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3806: checking for $ac_func" >&5
+echo "configure:4398: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3811 "configure"
+#line 4403 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -3830,7 +4422,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:3834: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4426: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -3859,12 +4451,12 @@ done
      for ac_func in stpcpy
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3863: checking for $ac_func" >&5
+echo "configure:4455: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3868 "configure"
+#line 4460 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -3887,7 +4479,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:3891: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4483: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -3921,19 +4513,19 @@ EOF
 
    if test $ac_cv_header_locale_h = yes; then
     echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:3925: checking for LC_MESSAGES" >&5
+echo "configure:4517: checking for LC_MESSAGES" >&5
 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3930 "configure"
+#line 4522 "configure"
 #include "confdefs.h"
 #include <locale.h>
 int main() {
 return LC_MESSAGES
 ; return 0; }
 EOF
-if { (eval echo configure:3937: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4529: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   am_cv_val_LC_MESSAGES=yes
 else
@@ -3954,7 +4546,7 @@ EOF
     fi
   fi
    echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:3958: checking whether NLS is requested" >&5
+echo "configure:4550: checking whether NLS is requested" >&5
         # Check whether --enable-nls or --disable-nls was given.
 if test "${enable_nls+set}" = set; then
   enableval="$enable_nls"
@@ -3974,7 +4566,7 @@ fi
 EOF
 
       echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:3978: checking whether included gettext is requested" >&5
+echo "configure:4570: checking whether included gettext is requested" >&5
       # Check whether --with-included-gettext or --without-included-gettext was given.
 if test "${with_included_gettext+set}" = set; then
   withval="$with_included_gettext"
@@ -3993,17 +4585,17 @@ fi
 
 	ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:3997: checking for libintl.h" >&5
+echo "configure:4589: checking for libintl.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4002 "configure"
+#line 4594 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4007: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4599: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -4020,19 +4612,19 @@ fi
 if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:4024: checking for gettext in libc" >&5
+echo "configure:4616: checking for gettext in libc" >&5
 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4029 "configure"
+#line 4621 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 int main() {
 return (int) gettext ("")
 ; return 0; }
 EOF
-if { (eval echo configure:4036: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4628: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gt_cv_func_gettext_libc=yes
 else
@@ -4048,7 +4640,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6
 
 	   if test "$gt_cv_func_gettext_libc" != "yes"; then
 	     echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:4052: checking for bindtextdomain in -lintl" >&5
+echo "configure:4644: checking for bindtextdomain in -lintl" >&5
 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -4056,7 +4648,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lintl  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 4060 "configure"
+#line 4652 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -4067,7 +4659,7 @@ int main() {
 bindtextdomain()
 ; return 0; }
 EOF
-if { (eval echo configure:4071: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4663: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -4083,19 +4675,19 @@ fi
 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:4087: checking for gettext in libintl" >&5
+echo "configure:4679: checking for gettext in libintl" >&5
 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4092 "configure"
+#line 4684 "configure"
 #include "confdefs.h"
 
 int main() {
 return (int) gettext ("")
 ; return 0; }
 EOF
-if { (eval echo configure:4099: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4691: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gt_cv_func_gettext_libintl=yes
 else
@@ -4123,7 +4715,7 @@ EOF
 	      # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4127: checking for $ac_word" >&5
+echo "configure:4719: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4157,12 +4749,12 @@ fi
 		for ac_func in dcgettext
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4161: checking for $ac_func" >&5
+echo "configure:4753: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4166 "configure"
+#line 4758 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -4185,7 +4777,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:4189: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4781: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -4212,7 +4804,7 @@ done
 		# Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4216: checking for $ac_word" >&5
+echo "configure:4808: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4248,7 +4840,7 @@ fi
 		# Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4252: checking for $ac_word" >&5
+echo "configure:4844: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4280,7 +4872,7 @@ else
 fi
 
 		cat > conftest.$ac_ext <<EOF
-#line 4284 "configure"
+#line 4876 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -4288,7 +4880,7 @@ extern int _nl_msg_cat_cntr;
 			       return _nl_msg_cat_cntr
 ; return 0; }
 EOF
-if { (eval echo configure:4292: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4884: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   CATOBJEXT=.gmo
 		   DATADIRNAME=share
@@ -4320,7 +4912,7 @@ fi
         # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4324: checking for $ac_word" >&5
+echo "configure:4916: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4354,7 +4946,7 @@ fi
         # Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4358: checking for $ac_word" >&5
+echo "configure:4950: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4390,7 +4982,7 @@ fi
         # Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4394: checking for $ac_word" >&5
+echo "configure:4986: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4480,7 +5072,7 @@ fi
        LINGUAS=
      else
        echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:4484: checking for catalogs to be installed" >&5
+echo "configure:5076: checking for catalogs to be installed" >&5
        NEW_LINGUAS=
        for lang in ${LINGUAS=$ALL_LINGUAS}; do
          case "$ALL_LINGUAS" in
@@ -4508,17 +5100,17 @@ echo "configure:4484: checking for catalogs to be installed" >&5
       if test "$CATOBJEXT" = ".cat"; then
 	 ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:4512: checking for linux/version.h" >&5
+echo "configure:5104: checking for linux/version.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4517 "configure"
+#line 5109 "configure"
 #include "confdefs.h"
 #include <linux/version.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4522: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5114: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -4581,7 +5173,7 @@ fi
   
 
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:4585: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:5177: checking whether to enable maintainer-specific portions of Makefiles" >&5
     # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"
@@ -4603,72 +5195,10 @@ fi
   MAINT=$MAINTAINER_MODE_TRUE
   
 
-echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:4608: checking for Cygwin environment" >&5
-if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 4613 "configure"
-#include "confdefs.h"
-
-int main() {
-
-#ifndef __CYGWIN__
-#define __CYGWIN__ __CYGWIN32__
-#endif
-return __CYGWIN__;
-; return 0; }
-EOF
-if { (eval echo configure:4624: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_cygwin=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_cygwin=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_cygwin" 1>&6
-CYGWIN=
-test "$ac_cv_cygwin" = yes && CYGWIN=yes
-echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:4641: checking for mingw32 environment" >&5
-if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 4646 "configure"
-#include "confdefs.h"
-
-int main() {
-return __MINGW32__;
-; return 0; }
-EOF
-if { (eval echo configure:4653: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
-  rm -rf conftest*
-  ac_cv_mingw32=yes
-else
-  echo "configure: failed program was:" >&5
-  cat conftest.$ac_ext >&5
-  rm -rf conftest*
-  ac_cv_mingw32=no
-fi
-rm -f conftest*
-rm -f conftest*
-fi
-
-echo "$ac_t""$ac_cv_mingw32" 1>&6
-MINGW32=
-test "$ac_cv_mingw32" = yes && MINGW32=yes
 
 
 echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:4672: checking for executable suffix" >&5
+echo "configure:5202: checking for executable suffix" >&5
 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4678,7 +5208,7 @@ else
   rm -f conftest*
   echo 'int main () { return 0; }' > conftest.$ac_ext
   ac_cv_exeext=
-  if { (eval echo configure:4682: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+  if { (eval echo configure:5212: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
     for file in conftest.*; do
       case $file in
       *.c | *.o | *.obj) ;;
@@ -4703,17 +5233,17 @@ for ac_hdr in string.h stdlib.h memory.h strings.h unistd.h stdarg.h varargs.h e
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4707: checking for $ac_hdr" >&5
+echo "configure:5237: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4712 "configure"
+#line 5242 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4717: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5247: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -4743,7 +5273,7 @@ done
 # Put this here so that autoconf's "cross-compiling" message doesn't confuse
 # people who are not cross-compiling but are compiling cross-assemblers.
 echo $ac_n "checking whether compiling a cross-assembler""... $ac_c" 1>&6
-echo "configure:4747: checking whether compiling a cross-assembler" >&5
+echo "configure:5277: checking whether compiling a cross-assembler" >&5
 if test "${host}" = "${target}"; then
   cross_gas=no
 else
@@ -4758,19 +5288,19 @@ echo "$ac_t""$cross_gas" 1>&6
 # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
 # for constant arguments.  Useless!
 echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:4762: checking for working alloca.h" >&5
+echo "configure:5292: checking for working alloca.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4767 "configure"
+#line 5297 "configure"
 #include "confdefs.h"
 #include <alloca.h>
 int main() {
 char *p = alloca(2 * sizeof(int));
 ; return 0; }
 EOF
-if { (eval echo configure:4774: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5304: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_header_alloca_h=yes
 else
@@ -4791,12 +5321,12 @@ EOF
 fi
 
 echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:4795: checking for alloca" >&5
+echo "configure:5325: checking for alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4800 "configure"
+#line 5330 "configure"
 #include "confdefs.h"
 
 #ifdef __GNUC__
@@ -4824,7 +5354,7 @@ int main() {
 char *p = (char *) alloca(1);
 ; return 0; }
 EOF
-if { (eval echo configure:4828: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5358: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_func_alloca_works=yes
 else
@@ -4856,12 +5386,12 @@ EOF
 
 
 echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:4860: checking whether alloca needs Cray hooks" >&5
+echo "configure:5390: checking whether alloca needs Cray hooks" >&5
 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4865 "configure"
+#line 5395 "configure"
 #include "confdefs.h"
 #if defined(CRAY) && ! defined(CRAY2)
 webecray
@@ -4886,12 +5416,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6
 if test $ac_cv_os_cray = yes; then
 for ac_func in _getb67 GETB67 getb67; do
   echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4890: checking for $ac_func" >&5
+echo "configure:5420: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 4895 "configure"
+#line 5425 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -4914,7 +5444,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:4918: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5448: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -4941,7 +5471,7 @@ done
 fi
 
 echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:4945: checking stack direction for C alloca" >&5
+echo "configure:5475: checking stack direction for C alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -4949,7 +5479,7 @@ else
   ac_cv_c_stack_direction=0
 else
   cat > conftest.$ac_ext <<EOF
-#line 4953 "configure"
+#line 5483 "configure"
 #include "confdefs.h"
 find_stack_direction ()
 {
@@ -4968,7 +5498,7 @@ main ()
   exit (find_stack_direction() < 0);
 }
 EOF
-if { (eval echo configure:4972: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5502: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_stack_direction=1
 else
@@ -4990,21 +5520,21 @@ EOF
 fi
 
 echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:4994: checking for inline" >&5
+echo "configure:5524: checking for inline" >&5
 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_cv_c_inline=no
 for ac_kw in inline __inline__ __inline; do
   cat > conftest.$ac_ext <<EOF
-#line 5001 "configure"
+#line 5531 "configure"
 #include "confdefs.h"
 
 int main() {
 } $ac_kw foo() {
 ; return 0; }
 EOF
-if { (eval echo configure:5008: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5538: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_inline=$ac_kw; break
 else
@@ -5034,12 +5564,12 @@ esac
 for ac_func in unlink remove
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5038: checking for $ac_func" >&5
+echo "configure:5568: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5043 "configure"
+#line 5573 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -5062,7 +5592,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:5066: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5596: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -5091,12 +5621,12 @@ done
 for ac_func in sbrk
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5095: checking for $ac_func" >&5
+echo "configure:5625: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5100 "configure"
+#line 5630 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -5119,7 +5649,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:5123: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5653: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -5154,7 +5684,7 @@ case "$host" in
   ;;
 *-ncr-sysv4.3*)
   echo $ac_n "checking for _mwvalidcheckl in -lmw""... $ac_c" 1>&6
-echo "configure:5158: checking for _mwvalidcheckl in -lmw" >&5
+echo "configure:5688: checking for _mwvalidcheckl in -lmw" >&5
 ac_lib_var=`echo mw'_'_mwvalidcheckl | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -5162,7 +5692,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lmw  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 5166 "configure"
+#line 5696 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -5173,7 +5703,7 @@ int main() {
 _mwvalidcheckl()
 ; return 0; }
 EOF
-if { (eval echo configure:5177: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5707: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -5194,7 +5724,7 @@ else
 fi
 
   echo $ac_n "checking for main in -lm""... $ac_c" 1>&6
-echo "configure:5198: checking for main in -lm" >&5
+echo "configure:5728: checking for main in -lm" >&5
 ac_lib_var=`echo m'_'main | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -5202,14 +5732,14 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lm  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 5206 "configure"
+#line 5736 "configure"
 #include "confdefs.h"
 
 int main() {
 main()
 ; return 0; }
 EOF
-if { (eval echo configure:5213: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5743: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -5232,7 +5762,7 @@ fi
   ;;
 *)
   echo $ac_n "checking for main in -lm""... $ac_c" 1>&6
-echo "configure:5236: checking for main in -lm" >&5
+echo "configure:5766: checking for main in -lm" >&5
 ac_lib_var=`echo m'_'main | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -5240,14 +5770,14 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lm  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 5244 "configure"
+#line 5774 "configure"
 #include "confdefs.h"
 
 int main() {
 main()
 ; return 0; }
 EOF
-if { (eval echo configure:5251: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5781: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -5278,12 +5808,12 @@ esac
 # enough, but on some of those systems, the assert macro relies on requoting
 # working properly!
 echo $ac_n "checking for working assert macro""... $ac_c" 1>&6
-echo "configure:5282: checking for working assert macro" >&5
+echo "configure:5812: checking for working assert macro" >&5
 if eval "test \"`echo '$''{'gas_cv_assert_ok'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5287 "configure"
+#line 5817 "configure"
 #include "confdefs.h"
 #include <assert.h>
 #include <stdio.h>
@@ -5299,7 +5829,7 @@ assert (a == b
 
 ; return 0; }
 EOF
-if { (eval echo configure:5303: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5833: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gas_cv_assert_ok=yes
 else
@@ -5340,12 +5870,12 @@ gas_test_headers="
 "
 
 echo $ac_n "checking whether declaration is required for strstr""... $ac_c" 1>&6
-echo "configure:5344: checking whether declaration is required for strstr" >&5
+echo "configure:5874: checking whether declaration is required for strstr" >&5
 if eval "test \"`echo '$''{'gas_cv_decl_needed_strstr'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5349 "configure"
+#line 5879 "configure"
 #include "confdefs.h"
 $gas_test_headers
 int main() {
@@ -5356,7 +5886,7 @@ x = (f) strstr;
 
 ; return 0; }
 EOF
-if { (eval echo configure:5360: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5890: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gas_cv_decl_needed_strstr=no
 else
@@ -5377,12 +5907,12 @@ fi
 
 
 echo $ac_n "checking whether declaration is required for malloc""... $ac_c" 1>&6
-echo "configure:5381: checking whether declaration is required for malloc" >&5
+echo "configure:5911: checking whether declaration is required for malloc" >&5
 if eval "test \"`echo '$''{'gas_cv_decl_needed_malloc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5386 "configure"
+#line 5916 "configure"
 #include "confdefs.h"
 $gas_test_headers
 int main() {
@@ -5393,7 +5923,7 @@ x = (f) malloc;
 
 ; return 0; }
 EOF
-if { (eval echo configure:5397: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5927: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gas_cv_decl_needed_malloc=no
 else
@@ -5414,12 +5944,12 @@ fi
 
 
 echo $ac_n "checking whether declaration is required for free""... $ac_c" 1>&6
-echo "configure:5418: checking whether declaration is required for free" >&5
+echo "configure:5948: checking whether declaration is required for free" >&5
 if eval "test \"`echo '$''{'gas_cv_decl_needed_free'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5423 "configure"
+#line 5953 "configure"
 #include "confdefs.h"
 $gas_test_headers
 int main() {
@@ -5430,7 +5960,7 @@ x = (f) free;
 
 ; return 0; }
 EOF
-if { (eval echo configure:5434: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5964: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gas_cv_decl_needed_free=no
 else
@@ -5451,12 +5981,12 @@ fi
 
 
 echo $ac_n "checking whether declaration is required for sbrk""... $ac_c" 1>&6
-echo "configure:5455: checking whether declaration is required for sbrk" >&5
+echo "configure:5985: checking whether declaration is required for sbrk" >&5
 if eval "test \"`echo '$''{'gas_cv_decl_needed_sbrk'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5460 "configure"
+#line 5990 "configure"
 #include "confdefs.h"
 $gas_test_headers
 int main() {
@@ -5467,7 +5997,7 @@ x = (f) sbrk;
 
 ; return 0; }
 EOF
-if { (eval echo configure:5471: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6001: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gas_cv_decl_needed_sbrk=no
 else
@@ -5488,12 +6018,12 @@ fi
 
 
 echo $ac_n "checking whether declaration is required for environ""... $ac_c" 1>&6
-echo "configure:5492: checking whether declaration is required for environ" >&5
+echo "configure:6022: checking whether declaration is required for environ" >&5
 if eval "test \"`echo '$''{'gas_cv_decl_needed_environ'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5497 "configure"
+#line 6027 "configure"
 #include "confdefs.h"
 $gas_test_headers
 int main() {
@@ -5504,7 +6034,7 @@ x = (f) environ;
 
 ; return 0; }
 EOF
-if { (eval echo configure:5508: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6038: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gas_cv_decl_needed_environ=no
 else
@@ -5528,12 +6058,12 @@ fi
 # for it?
 
 echo $ac_n "checking whether declaration is required for errno""... $ac_c" 1>&6
-echo "configure:5532: checking whether declaration is required for errno" >&5
+echo "configure:6062: checking whether declaration is required for errno" >&5
 if eval "test \"`echo '$''{'gas_cv_decl_needed_errno'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 5537 "configure"
+#line 6067 "configure"
 #include "confdefs.h"
 
 #ifdef HAVE_ERRNO_H
@@ -5548,7 +6078,7 @@ x = (f) errno;
 
 ; return 0; }
 EOF
-if { (eval echo configure:5552: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6082: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gas_cv_decl_needed_errno=no
 else
@@ -5729,9 +6259,12 @@ s%@AUTOMAKE@%$AUTOMAKE%g
 s%@AUTOHEADER@%$AUTOHEADER%g
 s%@MAKEINFO@%$MAKEINFO%g
 s%@SET_MAKE@%$SET_MAKE%g
-s%@RANLIB@%$RANLIB%g
 s%@CC@%$CC%g
 s%@LN_S@%$LN_S%g
+s%@OBJEXT@%$OBJEXT%g
+s%@EXEEXT@%$EXEEXT%g
+s%@RANLIB@%$RANLIB%g
+s%@STRIP@%$STRIP%g
 s%@LIBTOOL@%$LIBTOOL%g
 s%@WARN_CFLAGS@%$WARN_CFLAGS%g
 s%@GDBINIT@%$GDBINIT%g
@@ -5774,7 +6307,6 @@ s%@l@%$l%g
 s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
 s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
 s%@MAINT@%$MAINT%g
-s%@EXEEXT@%$EXEEXT%g
 s%@LIBM@%$LIBM%g
 
 CEOF