[AArch64][SVE 12/32] Remove boolean parameters from parse_address_main

In the review of the original version of this series, Richard didn't
like the use of boolean parameters to parse_address_main.  I think we
can just get rid of them and leave the callers to check the addressing
modes.  As it happens, the handling of ADDR_SIMM9{,_2} already did this
for relocation operators (i.e. it used parse_address_reloc and then
rejected relocations).

The callers are already set up to reject invalid register post-indexed
addressing, so we can simply remove the accept_reg_post_index parameter
without adding any more checks.  This again creates a corner case where:

	.equ	x2, 1
	ldr	w0, [x1], x2

was previously an acceptable way of writing "ldr w0, [x1], #1" but
is now rejected.

Removing the "reloc" parameter means that two cases need to check
explicitly for relocation operators.

ADDR_SIMM9_2 appers to be unused.  I'll send a separate patch
to remove it.

This patch makes parse_address temporarily equivalent to
parse_address_main, but later patches in the series will need
to keep the distinction.

gas/
	* config/tc-aarch64.c (parse_address_main): Remove reloc and
	accept_reg_post_index parameters.  Parse relocations and register
	post indexes unconditionally.
	(parse_address): Remove accept_reg_post_index parameter.
	Update call to parse_address_main.
	(parse_address_reloc): Delete.
	(parse_operands): Call parse_address instead of parse_address_main.
	Update existing callers of parse_address and make them check
	inst.reloc.type where appropriate.
	* testsuite/gas/aarch64/diagnostic.s: Add tests for relocations
	in ADDR_SIMPLE, SIMD_ADDR_SIMPLE, ADDR_SIMM7 and ADDR_SIMM9 addresses.
	Also test for invalid uses of post-index register addressing.
	* testsuite/gas/aarch64/diagnostic.l: Update accordingly.

4 files changed, 57 insertions, 24 deletions

diff --git a/gas/ChangeLog b/gas/ChangeLog
index e56f239..d7df100 100644
--- a/gas/ChangeLog
+++ b/gas/ChangeLog
@@ -1,5 +1,21 @@
 2016-09-21  Richard Sandiford  <richard.sandiford@arm.com>
 
+	* config/tc-aarch64.c (parse_address_main): Remove reloc and
+	accept_reg_post_index parameters.  Parse relocations and register
+	post indexes unconditionally.
+	(parse_address): Remove accept_reg_post_index parameter.
+	Update call to parse_address_main.
+	(parse_address_reloc): Delete.
+	(parse_operands): Call parse_address instead of parse_address_main.
+	Update existing callers of parse_address and make them check
+	inst.reloc.type where appropriate.
+	* testsuite/gas/aarch64/diagnostic.s: Add tests for relocations
+	in ADDR_SIMPLE, SIMD_ADDR_SIMPLE, ADDR_SIMM7 and ADDR_SIMM9 addresses.
+	Also test for invalid uses of post-index register addressing.
+	* testsuite/gas/aarch64/diagnostic.l: Update accordingly.
+
+2016-09-21  Richard Sandiford  <richard.sandiford@arm.com>
+
 	* config/tc-aarch64.c (REG_TYPE_R_Z, REG_TYPE_R_SP): New register
 	types.
 	(get_reg_expected_msg): Handle them and REG_TYPE_R64_SP.
diff --git a/gas/config/tc-aarch64.c b/gas/config/tc-aarch64.c
index 7b5be8b..f82fdb9 100644
--- a/gas/config/tc-aarch64.c
+++ b/gas/config/tc-aarch64.c
@@ -3173,8 +3173,7 @@ parse_shifter_operand_reloc (char **str, aarch64_opnd_info *operand,
    supported by the instruction, and to set inst.reloc.type.  */
 
 static bfd_boolean
-parse_address_main (char **str, aarch64_opnd_info *operand, int reloc,
-		    int accept_reg_post_index)
+parse_address_main (char **str, aarch64_opnd_info *operand)
 {
   char *p = *str;
   const reg_entry *reg;
@@ -3190,7 +3189,7 @@ parse_address_main (char **str, aarch64_opnd_info *operand, int reloc,
 
       /* #:<reloc_op>:<symbol>  */
       skip_past_char (&p, '#');
-      if (reloc && skip_past_char (&p, ':'))
+      if (skip_past_char (&p, ':'))
 	{
 	  bfd_reloc_code_real_type ty;
 	  struct reloc_table_entry *entry;
@@ -3315,7 +3314,7 @@ parse_address_main (char **str, aarch64_opnd_info *operand, int reloc,
 	{
 	  /* [Xn,#:<reloc_op>:<symbol>  */
 	  skip_past_char (&p, '#');
-	  if (reloc && skip_past_char (&p, ':'))
+	  if (skip_past_char (&p, ':'))
 	    {
 	      struct reloc_table_entry *entry;
 
@@ -3388,8 +3387,8 @@ parse_address_main (char **str, aarch64_opnd_info *operand, int reloc,
 	  return FALSE;
 	}
 
-      if (accept_reg_post_index
-	  && (reg = aarch64_reg_parse_32_64 (&p, &offset_qualifier)))
+      reg = aarch64_reg_parse_32_64 (&p, &offset_qualifier);
+      if (reg)
 	{
 	  /* [Xn],Xm */
 	  if (!aarch64_check_reg_type (reg, REG_TYPE_R_64))
@@ -3428,19 +3427,12 @@ parse_address_main (char **str, aarch64_opnd_info *operand, int reloc,
   return TRUE;
 }
 
-/* Return TRUE on success; otherwise return FALSE.  */
-static bfd_boolean
-parse_address (char **str, aarch64_opnd_info *operand,
-	       int accept_reg_post_index)
-{
-  return parse_address_main (str, operand, 0, accept_reg_post_index);
-}
-
-/* Return TRUE on success; otherwise return FALSE.  */
+/* Parse a base AArch64 address (as opposed to an SVE one).  Return TRUE
+   on success.  */
 static bfd_boolean
-parse_address_reloc (char **str, aarch64_opnd_info *operand)
+parse_address (char **str, aarch64_opnd_info *operand)
 {
-  return parse_address_main (str, operand, 1, 0);
+  return parse_address_main (str, operand);
 }
 
 /* Parse an operand for a MOVZ, MOVN or MOVK instruction.
@@ -5419,7 +5411,7 @@ parse_operands (char *str, const aarch64_opcode *opcode)
 	case AARCH64_OPND_ADDR_PCREL19:
 	case AARCH64_OPND_ADDR_PCREL21:
 	case AARCH64_OPND_ADDR_PCREL26:
-	  po_misc_or_fail (parse_address_reloc (&str, info));
+	  po_misc_or_fail (parse_address (&str, info));
 	  if (!info->addr.pcrel)
 	    {
 	      set_syntax_error (_("invalid pc-relative address"));
@@ -5490,7 +5482,7 @@ parse_operands (char *str, const aarch64_opcode *opcode)
 	    char *start = str;
 	    /* First use the normal address-parsing routines, to get
 	       the usual syntax errors.  */
-	    po_misc_or_fail (parse_address (&str, info, 0));
+	    po_misc_or_fail (parse_address (&str, info));
 	    if (info->addr.pcrel || info->addr.offset.is_reg
 		|| !info->addr.preind || info->addr.postind
 		|| info->addr.writeback)
@@ -5521,7 +5513,7 @@ parse_operands (char *str, const aarch64_opcode *opcode)
 
 	case AARCH64_OPND_ADDR_REGOFF:
 	  /* [<Xn|SP>, <R><m>{, <extend> {<amount>}}]  */
-	  po_misc_or_fail (parse_address (&str, info, 0));
+	  po_misc_or_fail (parse_address (&str, info));
 	  if (info->addr.pcrel || !info->addr.offset.is_reg
 	      || !info->addr.preind || info->addr.postind
 	      || info->addr.writeback)
@@ -5540,13 +5532,18 @@ parse_operands (char *str, const aarch64_opcode *opcode)
 	  break;
 
 	case AARCH64_OPND_ADDR_SIMM7:
-	  po_misc_or_fail (parse_address (&str, info, 0));
+	  po_misc_or_fail (parse_address (&str, info));
 	  if (info->addr.pcrel || info->addr.offset.is_reg
 	      || (!info->addr.preind && !info->addr.postind))
 	    {
 	      set_syntax_error (_("invalid addressing mode"));
 	      goto failure;
 	    }
+	  if (inst.reloc.type != BFD_RELOC_UNUSED)
+	    {
+	      set_syntax_error (_("relocation not allowed"));
+	      goto failure;
+	    }
 	  assign_imm_if_const_or_fixup_later (&inst.reloc, info,
 					      /* addr_off_p */ 1,
 					      /* need_libopcodes_p */ 1,
@@ -5555,7 +5552,7 @@ parse_operands (char *str, const aarch64_opcode *opcode)
 
 	case AARCH64_OPND_ADDR_SIMM9:
 	case AARCH64_OPND_ADDR_SIMM9_2:
-	  po_misc_or_fail (parse_address_reloc (&str, info));
+	  po_misc_or_fail (parse_address (&str, info));
 	  if (info->addr.pcrel || info->addr.offset.is_reg
 	      || (!info->addr.preind && !info->addr.postind)
 	      || (operands[i] == AARCH64_OPND_ADDR_SIMM9_2
@@ -5576,7 +5573,7 @@ parse_operands (char *str, const aarch64_opcode *opcode)
 	  break;
 
 	case AARCH64_OPND_ADDR_UIMM12:
-	  po_misc_or_fail (parse_address_reloc (&str, info));
+	  po_misc_or_fail (parse_address (&str, info));
 	  if (info->addr.pcrel || info->addr.offset.is_reg
 	      || !info->addr.preind || info->addr.writeback)
 	    {
@@ -5596,7 +5593,7 @@ parse_operands (char *str, const aarch64_opcode *opcode)
 
 	case AARCH64_OPND_SIMD_ADDR_POST:
 	  /* [<Xn|SP>], <Xm|#<amount>>  */
-	  po_misc_or_fail (parse_address (&str, info, 1));
+	  po_misc_or_fail (parse_address (&str, info));
 	  if (!info->addr.postind || !info->addr.writeback)
 	    {
 	      set_syntax_error (_("invalid addressing mode"));
diff --git a/gas/testsuite/gas/aarch64/diagnostic.l b/gas/testsuite/gas/aarch64/diagnostic.l
index ef23577..0fb4db9 100644
--- a/gas/testsuite/gas/aarch64/diagnostic.l
+++ b/gas/testsuite/gas/aarch64/diagnostic.l
@@ -150,3 +150,11 @@
 [^:]*:264: Error: invalid floating-point constant at operand 2 -- `fmov s0,-2'
 [^:]*:266: Error: integer 64-bit register expected at operand 2 -- `st2 {v0.4s,v1.4s},\[sp\],xzr'
 [^:]*:267: Error: integer or zero register expected at operand 2 -- `str x1,\[x2,sp\]'
+[^:]*:270: Error: relocation not allowed at operand 3 -- `ldnp x1,x2,\[x3,#:lo12:foo\]'
+[^:]*:271: Error: invalid addressing mode at operand 2 -- `ld1 {v0\.4s},\[x3,#:lo12:foo\]'
+[^:]*:272: Error: the optional immediate offset can only be 0 at operand 2 -- `stuminl x0,\[x3,#:lo12:foo\]'
+[^:]*:273: Error: relocation not allowed at operand 2 -- `prfum pldl1keep,\[x3,#:lo12:foo\]'
+[^:]*:275: Error: invalid addressing mode at operand 2 -- `ldr x0,\[x3\],x4'
+[^:]*:276: Error: invalid addressing mode at operand 3 -- `ldnp x1,x2,\[x3\],x4'
+[^:]*:278: Error: invalid addressing mode at operand 2 -- `stuminl x0,\[x3\],x4'
+[^:]*:279: Error: invalid addressing mode at operand 2 -- `prfum pldl1keep,\[x3\],x4'
diff --git a/gas/testsuite/gas/aarch64/diagnostic.s b/gas/testsuite/gas/aarch64/diagnostic.s
index 8dbb542..a9cd124 100644
--- a/gas/testsuite/gas/aarch64/diagnostic.s
+++ b/gas/testsuite/gas/aarch64/diagnostic.s
@@ -265,3 +265,15 @@
 
 	st2	{v0.4s, v1.4s}, [sp], xzr
 	str	x1, [x2, sp]
+
+	ldr	x0, [x1, #:lo12:foo] // OK
+	ldnp	x1, x2, [x3, #:lo12:foo]
+	ld1	{v0.4s}, [x3, #:lo12:foo]
+	stuminl x0, [x3, #:lo12:foo]
+	prfum	pldl1keep, [x3, #:lo12:foo]
+
+	ldr	x0, [x3], x4
+	ldnp	x1, x2, [x3], x4
+	ld1	{v0.4s}, [x3], x4 // OK
+	stuminl x0, [x3], x4
+	prfum	pldl1keep, [x3], x4