aboutsummaryrefslogtreecommitdiff
path: root/gas
diff options
context:
space:
mode:
authorKen Raeburn <raeburn@cygnus>1992-08-26 04:08:45 +0000
committerKen Raeburn <raeburn@cygnus>1992-08-26 04:08:45 +0000
commit4134a793c7722b5f721fbc545e42b643610a9b51 (patch)
tree60208a6a950a254e16b7453a515da9b8745f80af /gas
parentb2f221a9446b37245afef3567796fe054a38f137 (diff)
downloadgdb-4134a793c7722b5f721fbc545e42b643610a9b51.zip
gdb-4134a793c7722b5f721fbc545e42b643610a9b51.tar.gz
gdb-4134a793c7722b5f721fbc545e42b643610a9b51.tar.bz2
* config/tc-m68k.c (init_table): Now const. Always include 68851
data, so that "bc" is available to 68040 cache instructions. Added "tt0", "tt1", and 68ec030 variants. (md_assemble): Complain if 68000 (only) and 68881 are specified. (enum _register): Added TT0, TT1. (m68k_ip, cases '3' and 't'): Handle new operand type codes. Pass line number correctly in "internal error" messages. Don't print architecture-mismatch message for operand errors. From Colin Smith (colin@wrs.com): * config/tc-m68k.c (m68k_ip, case '_'): Use addword twice rather than install_operand.
Diffstat (limited to 'gas')
-rw-r--r--gas/config/tc-m68k.c159
1 files changed, 109 insertions, 50 deletions
diff --git a/gas/config/tc-m68k.c b/gas/config/tc-m68k.c
index 052e4d8..a0109be 100644
--- a/gas/config/tc-m68k.c
+++ b/gas/config/tc-m68k.c
@@ -238,7 +238,7 @@ enum _register {
FPS,
FPC,
- DRP,
+ DRP, /* 68851 or 68030 MMU regs */
CRP,
CAL,
VAL,
@@ -262,7 +262,8 @@ enum _register {
BAC5,
BAC6,
BAC7,
- PSR,
+ PSR, /* aka MMUSR on 68030 (but not MMUSR on 68040)
+ and ACUSR on 68ec030 */
PCSR,
IC, /* instruction cache token */
@@ -270,6 +271,8 @@ enum _register {
NC, /* no cache token */
BC, /* both caches token */
+ TT0, /* 68030 access control unit regs */
+ TT1,
};
/* Internal form of an operand. */
@@ -1176,6 +1179,11 @@ void m68k_ip (instring)
losing++;
break;
+ case '3':
+ if (opP->mode != MSCR || (opP->reg != TT0 && opP->reg != TT1))
+ losing++;
+ break;
+
case 'A':
if(opP->mode!=AREG)
losing++;
@@ -1316,6 +1324,17 @@ void m68k_ip (instring)
losing++;
break;
+ case 't':
+ if (opP->mode != IMMED)
+ losing++;
+ else
+ {
+ long t = get_num (opP->con1, 80);
+ if (t < 0 || t > 7 || isvar (opP->con1))
+ losing++;
+ }
+ break;
+
case 'U':
if(opP->mode!=MSCR || opP->reg!=USP)
losing++;
@@ -1323,7 +1342,10 @@ void m68k_ip (instring)
/* JF these are out of order. We could put them
in order if we were willing to put up with
- bunches of #ifdef m68851s in the code */
+ bunches of #ifdef m68851s in the code.
+
+ Don't forget that you need these operands
+ to use 68030 MMU instructions. */
#ifndef NO_68851
/* Memory addressing mode used by pflushr */
case '|':
@@ -1338,8 +1360,9 @@ void m68k_ip (instring)
break;
case 'P':
- if (opP->mode != MSCR || (opP->reg != TC && opP->reg != CAL &&
- opP->reg != VAL && opP->reg != SCC && opP->reg != AC))
+ if (opP->mode != MSCR
+ || (opP->reg != TC && opP->reg != CAL
+ && opP->reg != VAL && opP->reg != SCC && opP->reg != AC))
losing++;
break;
@@ -1349,8 +1372,9 @@ void m68k_ip (instring)
break;
case 'W':
- if (opP->mode != MSCR || (opP->reg != DRP && opP->reg != SRP &&
- opP->reg != CRP))
+ if (opP->mode != MSCR
+ || (opP->reg != DRP && opP->reg != SRP
+ && opP->reg != CRP))
losing++;
break;
@@ -1387,7 +1411,7 @@ void m68k_ip (instring)
break;
default:
- as_fatal("Internal error: Operand mode %c unknown in line %s of file \"%s\"",
+ as_fatal("Internal error: Operand mode %c unknown in line %d of file \"%s\"",
*s, __LINE__, __FILE__);
} /* switch on type of operand */
@@ -1403,7 +1427,8 @@ void m68k_ip (instring)
opcode = opcode->m_next;
if (!opcode) {
- if (ok_arch)
+ if (ok_arch
+ && !(ok_arch & current_architecture))
{
char buf[200], *cp;
int len;
@@ -1412,10 +1437,10 @@ void m68k_ip (instring)
switch (ok_arch)
{
case mfloat:
- strcpy (cp, "fpu");
+ strcpy (cp, "fpu (68040 or 68881/68882)");
break;
case mmmu:
- strcpy (cp, "mmu");
+ strcpy (cp, "mmu (68030 or 68851)");
break;
case m68020up:
strcpy (cp, "68020 or higher");
@@ -2227,12 +2252,32 @@ void m68k_ip (instring)
know(opP->reg == PCSR);
break;
#endif /* m68851 */
- case '_':
+ case '3':
+ switch (opP->reg)
+ {
+ case TT0:
+ tmpreg = 2;
+ break;
+ case TT1:
+ tmpreg = 3;
+ break;
+ default:
+ as_fatal ("failed sanity check");
+ }
+ install_operand (s[1], tmpreg);
+ break;
+ case 't':
+ tmpreg = get_num (opP->con1, 20);
+ install_operand (s[1], tmpreg);
+ break;
+ case '_': /* used only for move16 absolute 32-bit address */
tmpreg=get_num(opP->con1,80);
- install_operand(s[1], tmpreg);
+ addword (tmpreg >> 16);
+ addword (tmpreg & 0xFFFF);
break;
default:
- as_fatal("Internal error: Operand type %c unknown in line %s of file \"%s\"", s[0], __LINE__, __FILE__);
+ as_fatal("Internal error: Operand type %c unknown in line %d of file \"%s\"",
+ s[0], __LINE__, __FILE__);
}
}
/* By the time whe get here (FINALLY) the_ins contains the complete
@@ -2537,11 +2582,10 @@ int regnum;
symbol_table_insert(symbol_new(buf, SEG_REGISTER, regnum, &zero_address_frag));
}
-static struct {
+static const struct {
char *name;
int number;
-} init_table[] =
-{
+} init_table[] = {
"d0", DATA0,
"d1", DATA1,
"d2", DATA2,
@@ -2610,7 +2654,6 @@ int number;
"srp", SRP,
"urp", URP,
-#ifndef NO_68851
"ac", AC,
"bc", BC,
"cal", CAL,
@@ -2636,12 +2679,19 @@ int number;
"bac5", BAC5,
"bac6", BAC6,
"bac7", BAC7,
-#endif
"ic", IC,
"dc", DC,
"nc", NC,
+ "tt0", TT0,
+ "tt1", TT1,
+ /* 68ec030 versions of same */
+ "ac0", TT0,
+ "ac1", TT1,
+ /* 68ec030 access control unit, identical to 030 MMU status reg */
+ "acusr", PSR,
+
0,
};
@@ -2652,9 +2702,7 @@ init_regtable()
{
int i;
for (i = 0; init_table[i].name; i++)
- {
insert_reg(init_table[i].name, init_table[i].number);
- }
}
@@ -2668,47 +2716,58 @@ md_assemble(str)
int m,n = 0;
char *to_beg_P;
int shorts_this_frag;
+ static int done_first_time;
-
- if (cpu_of_arch (current_architecture) == 0)
+ if (!done_first_time)
{
- enum m68k_architecture cpu_type;
+ done_first_time = 1;
+
+ if (cpu_of_arch (current_architecture) == 0)
+ {
+ enum m68k_architecture cpu_type;
#ifndef TARGET_CPU
- cpu_type = m68020;
+ cpu_type = m68020;
#else
- if (strcmp (TARGET_CPU, "m68000") == 0)
- cpu_type = m68000;
- else if (strcmp (TARGET_CPU, "m68010") == 0)
- cpu_type = m68010;
- else if (strcmp (TARGET_CPU, "m68020") == 0
- || strcmp (TARGET_CPU, "m68k") == 0)
- cpu_type = m68020;
- else if (strcmp (TARGET_CPU, "m68030") == 0)
- cpu_type = m68030;
- else if (strcmp (TARGET_CPU, "m68040") == 0)
- cpu_type = m68040;
- else
- cpu_type = m68020;
+ if (strcmp (TARGET_CPU, "m68000") == 0)
+ cpu_type = m68000;
+ else if (strcmp (TARGET_CPU, "m68010") == 0)
+ cpu_type = m68010;
+ else if (strcmp (TARGET_CPU, "m68020") == 0
+ || strcmp (TARGET_CPU, "m68k") == 0)
+ cpu_type = m68020;
+ else if (strcmp (TARGET_CPU, "m68030") == 0)
+ cpu_type = m68030;
+ else if (strcmp (TARGET_CPU, "m68040") == 0)
+ cpu_type = m68040;
+ else
+ cpu_type = m68020;
#endif
- /* If float or mmu were specified, just default cpu. */
- if (current_architecture != 0)
- current_architecture |= cpu_type;
- else
- {
- if ((cpu_type & m68020up) != 0)
- current_architecture = (cpu_type
+ /* If float or mmu were specified, just default cpu. */
+ if (current_architecture != 0)
+ current_architecture |= cpu_type;
+ else
+ {
+ if ((cpu_type & m68020up) != 0)
+ current_architecture = (cpu_type
#ifndef NO_68881
- | m68881
+ | m68881
#endif
#ifndef NO_68851
- | m68851
+ | m68851
#endif
- );
- else
- current_architecture = cpu_type;
+ );
+ else
+ current_architecture = cpu_type;
+ }
+ }
+ if (cpu_of_arch (current_architecture) == m68000
+ && (current_architecture & m68881) != 0)
+ {
+ as_bad ("incompatible processors 68000 and 68881 specified");
}
+ done_first_time = 1;
}
memset((char *)(&the_ins), '\0', sizeof(the_ins)); /* JF for paranoia sake */