aboutsummaryrefslogtreecommitdiff
path: root/gas/testsuite
diff options
context:
space:
mode:
authorJeff Law <law@redhat.com>1994-05-16 19:25:51 +0000
committerJeff Law <law@redhat.com>1994-05-16 19:25:51 +0000
commita0546d5ed3e9a10f03e30edcae72e665cca809e2 (patch)
treec3d6869138038f6997041d122dbbb14a1eec09c7 /gas/testsuite
parentab0453e05debd68865e4ed2f83fa81cab649d221 (diff)
downloadgdb-a0546d5ed3e9a10f03e30edcae72e665cca809e2.zip
gdb-a0546d5ed3e9a10f03e30edcae72e665cca809e2.tar.gz
gdb-a0546d5ed3e9a10f03e30edcae72e665cca809e2.tar.bz2
* gas/hppa/reloc/reloc.exp: Tweak expected output to match new
ELF code. * gas/hppa/reloc/roundmode.s: Avoid "S" and "D" modes, ELF does not support them. * gas/hppa/unsorted/unsorted.exp: Tweak expected output to match new ELF code.
Diffstat (limited to 'gas/testsuite')
-rw-r--r--gas/testsuite/ChangeLog13
-rwxr-xr-xgas/testsuite/gas/hppa/reloc/reloc.exp154
2 files changed, 126 insertions, 41 deletions
diff --git a/gas/testsuite/ChangeLog b/gas/testsuite/ChangeLog
index fe34309..bd9c577 100644
--- a/gas/testsuite/ChangeLog
+++ b/gas/testsuite/ChangeLog
@@ -1,3 +1,16 @@
+Mon May 16 13:19:16 1994 Jeff Law (law@snake.cs.utah.edu)
+
+ * gas/hppa/reloc/reloc.exp: Tweak expected output to match new
+ ELF code.
+ * gas/hppa/reloc/roundmode.s: Avoid "S" and "D" modes, ELF does
+ not support them.
+ * gas/hppa/unsorted/unsorted.exp: Tweak expected output to match
+ new ELF code.
+
+Thu May 5 17:27:54 1994 Ken Raeburn (raeburn@cujo.cygnus.com)
+
+ * config/default.exp: Renamed from unix-gas.exp.
+
Mon Apr 11 10:31:00 1994 Bill Cox (bill@rtl.cygnus.com)
* Makefile.in (check): Set TCL_LIBRARY for runtest.
diff --git a/gas/testsuite/gas/hppa/reloc/reloc.exp b/gas/testsuite/gas/hppa/reloc/reloc.exp
index c76826c..829f07a 100755
--- a/gas/testsuite/gas/hppa/reloc/reloc.exp
+++ b/gas/testsuite/gas/hppa/reloc/reloc.exp
@@ -27,15 +27,29 @@ proc do_ble_relocation_test {} {
if [gas_test_old "blebug.s" "" "Proper relocation for BLE (part 1)"] then {
objdump_start_no_subdir "a.out" "-r"
- # At one time both versions of the assembler would incorrectly use
- # a PC-relative relocation for a BLE instruction.
- while 1 {
- expect {
- -re "^00000004\[^\n\]*ABS_CALL\[^\n\]*\n" { set x 1 }
- -re "\[^\n\]*\n" { }
- timeout { error "timeout\n"; break }
- eof { break }
+ if ![istarget hppa*-*-*elf*] then {
+ # At one time both versions of the assembler would incorrectly use
+ # a PC-relative relocation for a BLE instruction.
+ while 1 {
+ expect {
+ -re "^00000004\[^\n\]*ABS_CALL\[^\n\]*\n" { set x 1 }
+ -re "\[^\n\]*\n" { }
+ timeout { perror "timeout\n"; break }
+ eof { break }
+ }
+ }
+ } else {
+ # At one time both versions of the assembler would incorrectly use
+ # a PC-relative relocation for a BLE instruction.
+ while 1 {
+ expect {
+ -re "^00000000\[^\n\]*DIR21L\[^\n\]*\n" { set x 1 }
+ -re "^00000004\[^\n\]*DIR17R\[^\n\]*\n" { set x 1 }
+ -re "\[^\n\]*\n" { }
+ timeout { perror "timeout\n"; break }
+ eof { break }
}
+ }
}
}
@@ -61,10 +75,10 @@ proc do_relocation_reduction_tests {} {
expect {
-re "^00000004\[^\n\]*PLABEL\[^\n\]*foo\[^\n\]*\n"
{ set x [expr $x+1] }
- -re "^00000014\[^\n\]*PCREL_CALL\[^\n\]*foo\[^\n\]*\n"
+ -re "^00000014\[^\n\]*PCREL\[^\n\]*foo\[^\n\]*\n"
{ set x [expr $x+1] }
-re "\[^\n\]*\n" { }
- timeout { error "timeout\n"; break }
+ timeout { perror "timeout\n"; break }
eof { break }
}
}
@@ -90,7 +104,7 @@ proc do_ble_mode_selector_test {} {
-re "^ +\[0-9\]+ 0000 20202801\[^\n\]*\n" { set x [expr $x+1] }
-re "^ +\[0-9\]+ 0004 E420E008\[^\n\]*\n" { set x [expr $x+1] }
-re "\[^\n\]*\n" { }
- timeout { error "timeout\n"; break }
+ timeout { perror "timeout\n"; break }
eof { break }
}
}
@@ -118,7 +132,7 @@ proc do_plabel_relocation_test {} {
-re "^\[04\]0000004\[^\n\]*PLABEL\[^\n\]*\n"
{ set x [expr $x+1] }
-re "\[^\n\]*\n" { }
- timeout { error "timeout\n"; break }
+ timeout { perror "timeout\n"; break }
eof { break }
}
}
@@ -142,15 +156,15 @@ proc do_selector_scope_test {} {
# Check to make sure the relocation entry after the plabel is correct.
# If an old field selector was incorrectly "carried" over, then
# this test will fail.
- if [istarget hppa*-*-osf] then {
+ if [istarget hppa*-*-*elf*] then {
while 1 {
expect {
- -re "^00000014\[^\n\]*HPPA_32\[^\n\]*\n"
+ -re "^00000014\[^\n\]*DIR32\[^\n\]*\n"
{ set x 1 }
-re "^00000014\[^\n\]*PLABEL\[^\n\]*foo\[^\n\]*\n"
{ set x 0 }
-re "\[^\n\]*\n" { }
- timeout { error "timeout\n"; break }
+ timeout { perror "timeout\n"; break }
eof { break }
}
}
@@ -162,7 +176,7 @@ proc do_selector_scope_test {} {
-re "^00000014\[^\n\]*PLABEL\[^\n\]*foo\[^\n\]*\n"
{ set x 0 }
-re "\[^\n\]*\n" { }
- timeout { error "timeout\n"; break }
+ timeout { perror "timeout\n"; break }
eof { break }
}
}
@@ -193,7 +207,7 @@ proc do_local_label_as_operand_test {} {
-re "^00000030\[^\n\]*0x00000024\[^\n\]*\n"
{ set x [expr $x+1] }
-re "\[^\n\]*\n" { }
- timeout { error "timeout\n"; break }
+ timeout { perror "timeout\n"; break }
eof { break }
}
}
@@ -214,7 +228,7 @@ proc do_exit_relocation_test {} {
# Elf (osf) does not use ENTRY/EXIT relocations.
# I guess we could look at the unwind subspaces it builds...
# Until then, make sure it still assembles.
- if [istarget hppa*-*-osf*] then {
+ if [istarget hppa*-*-*elf*] then {
gas_test_old "exitbug.s" "" "Test for bogus R_EXIT relocation (part 1)"
return;
}
@@ -228,7 +242,7 @@ proc do_exit_relocation_test {} {
-re "^00000000\[^\n\]*R_EXIT\[^\n\]*\n"
{ set x [expr $x+1] }
-re "\[^\n\]*\n" { }
- timeout { error "timeout\n"; break }
+ timeout { perror "timeout\n"; break }
eof { break }
}
}
@@ -247,7 +261,7 @@ proc do_cross_space_fixup_test_1 {} {
set x 0
# ELF (osf) doesn't really handle extra sections too well...
- if [istarget hppa*-*-osf*] then {
+ if [istarget hppa*-*-*elf*] then {
return;
}
@@ -261,7 +275,7 @@ proc do_cross_space_fixup_test_1 {} {
-re "^00000000\[^\n\]*PCREL_CALL\[^\n\]*\n"
{ set x [expr $x+1] }
-re "\[^\n\]*\n" { }
- timeout { error "timeout\n"; break }
+ timeout { perror "timeout\n"; break }
eof { break }
}
}
@@ -280,18 +294,17 @@ proc do_cross_space_fixup_test_2 {} {
set x 0
# ELF (osf) doesn't really handle extra sections too well...
- if [istarget hppa*-*-osf*] then {
+ if [istarget hppa*-*-*elf*] then {
return;
}
- setup_xfail "hppa*-*-*"
- gas_start "fixupbug2.s" "-al"
+ gas_start "fixupbug.s" "-al"
while 1 {
expect {
-re "^ +\[0-9\]+ 0000 E8000002\[^\n\]*\n" { set x [expr $x+1] }
-re "\[^\n\]*\n" { }
- timeout { error "timeout\n"; break }
+ timeout { perror "timeout\n"; break }
eof { break }
}
}
@@ -314,27 +327,27 @@ proc do_round_mode_test {} {
# Make sure GAS generated correct relocations to switch rounding modes.
# Also make sure (for SOM) that redundant rounding mode relocations
# were eliminated.
- if [istarget hppa*-*-osf*] then {
+ if [istarget hppa*-*-*elf*] then {
while 1 {
expect {
- -re "^00000000\[^\n\]*LR21\[^\n\]*\n"
+ -re "^00000000\[^\n\]*DIR21L\[^\n\]*\n"
{ set x [expr $x+1] }
- -re "^00000004\[^\n\]*RR14\[^\n\]*\n"
+ -re "^00000004\[^\n\]*DIR14R\[^\n\]*\n"
{ set x [expr $x+1] }
- -re "^00000008\[^\n\]*L21\[^\n\]*\n"
+ -re "^00000008\[^\n\]*DIR21L\[^\n\]*\n"
{ set x [expr $x+1] }
- -re "^0000000c\[^\n\]*R14\[^\n\]*\n"
+ -re "^0000000c\[^\n\]*DIR14R\[^\n\]*\n"
{ set x [expr $x+1] }
- -re "^00000010\[^\n\]*LS21\[^\n\]*\n"
+ -re "^00000010\[^\n\]*DIR21L\[^\n\]*\n"
{ set x [expr $x+1] }
- -re "^00000014\[^\n\]*RS14\[^\n\]*\n"
+ -re "^00000014\[^\n\]*DIR14R\[^\n\]*\n"
{ set x [expr $x+1] }
- -re "^00000018\[^\n\]*LD21\[^\n\]*\n"
+ -re "^00000018\[^\n\]*DIR21L\[^\n\]*\n"
{ set x [expr $x+1] }
- -re "^0000001c\[^\n\]*RD14\[^\n\]*\n"
+ -re "^0000001c\[^\n\]*DIR14R\[^\n\]*\n"
{ set x [expr $x+1] }
-re "\[^\n\]*\n" { }
- timeout { error "timeout\n"; break }
+ timeout { perror "timeout\n"; break }
eof { break }
}
}
@@ -349,16 +362,16 @@ proc do_round_mode_test {} {
{ set x [expr $x+1] }
-re "^0000000c\[^\n\]*R_N_MODE\[^\n\]*\n"
{ fail $testname }
- -re "^00000010\[^\n\]*R_S_MODE\[^\n\]*\n"
+ -re "^00000010\[^\n\]*R_R_MODE\[^\n\]*\n"
{ set x [expr $x+1] }
- -re "^00000014\[^\n\]*R_S_MODE\[^\n\]*\n"
+ -re "^00000014\[^\n\]*R_R_MODE\[^\n\]*\n"
{ fail $testname }
- -re "^00000018\[^\n\]*R_D_MODE\[^\n\]*\n"
+ -re "^00000018\[^\n\]*R_R_MODE\[^\n\]*\n"
{ set x [expr $x+1] }
- -re "^0000001c\[^\n\]*R_D_MODE\[^\n\]*\n"
+ -re "^0000001c\[^\n\]*R_R_MODE\[^\n\]*\n"
{ fail $testname }
-re "\[^\n\]*\n" { }
- timeout { error "timeout\n"; break }
+ timeout { perror "timeout\n"; break }
eof { break }
}
}
@@ -369,7 +382,7 @@ proc do_round_mode_test {} {
objdump_finish
# Did we find what we were looking for? If not, flunk it.
- if [istarget hppa*-*-osf*] then {
+ if [istarget hppa*-*-*elf*] then {
if [expr $x==8] then { pass $testname } else { fail $testname }
} else {
if [expr $x==4] then { pass $testname } else { fail $testname }
@@ -377,6 +390,61 @@ proc do_round_mode_test {} {
}
}
+proc do_function_reloc_bug {} {
+ set testname "funcrelocbug.s: Test for reloc bug in non-plabel function reference (part 2)"
+ set x 0
+
+ if [gas_test_old "funcrelocbug.s" "" "Test for reloc bug in non-plabel function reference (part 1)"] {
+ objdump_start_no_subdir "a.out" "-r"
+
+ # Make sure GAS generated a correct relocation for the reference.
+ # branch/call
+ while 1 {
+ expect {
+ -re "^000000cc\[^\n\]*f2___4\[^\n+\]*\n"
+ { set x [expr $x+1] }
+ -re "^000000d0\[^\n\]*f2___4\[^\n+\]*\n"
+ { set x [expr $x+1] }
+ -re "\[^\n\]*\n" { }
+ timeout { perror "timeout\n"; break }
+ eof { break }
+ }
+ }
+
+ # This was intended to do any cleanup necessary. It kinda looks like it
+ # isn't needed, but just in case, please keep it in for now.
+ objdump_finish
+
+ # Did we find what we were looking for? If not, flunk it.
+ if [expr $x==2] then { pass $testname } else { fail $testname }
+
+ set testname "funcrelocbug.s: Test for reloc bug in non-plabel function reference (part3)"
+ set x 0
+
+ objdump_start_no_subdir "a.out" "-d"
+ # Make sure we didn't put anything in the instruction itself!
+ while 1 {
+ expect {
+ -re "^000000cc\[^\n\]*ldil 0,r20\[^\n\]*\n"
+ { set x [expr $x+1] }
+ -re "^000000d0\[^\n\]*ldo 0\[\(\]+r20\[\)\]+,r19\[^\n\]*\n"
+ { set x [expr $x+1] }
+ -re "\[^\n\]*\n" { }
+ timeout { perror "timeout\n"; break }
+ eof { break }
+ }
+ }
+
+ # This was intended to do any cleanup necessary. It kinda looks like it
+ # isn't needed, but just in case, please keep it in for now.
+ objdump_finish
+
+ # Did we find what we were looking for? If not, flunk it.
+ if [expr $x==2] then { pass $testname } else { fail $testname }
+ }
+
+}
+
if [istarget hppa*-*-*] then {
# Make sure we put the right relocation entry on a BLE instruction.
do_ble_relocation_test
@@ -413,4 +481,8 @@ if [istarget hppa*-*-*] then {
# Make sure we switch rounding modes correctly
do_round_mode_test
+
+ # Test for a bug found when a function was used in a non-branching
+ # instruction *without* a plabel (for portable runtime model)
+ do_function_reloc_bug
}