bfd/

	* configure.in: Define GENINSRC_NEVER.
	* doc/Makefile.am (bfd.info): Remove srcdir prefix.
	(MAINTAINERCLEANFILES): Add info file.
	(DISTCLEANFILES): Pretend to add info file.
	* po/Make-in (.po.gmo): Put gmo files in objdir.
	* configure, Makefile.in, doc/Makefile.in: Regenerated.
binutils/
	* configure.in: Define GENINSRC_NEVER.
	* doc/Makefile.am (MAINTAINERCLEANFILES): Add info file.
	(DISTCLEANFILES): Pretend to add info file.
	* po/Make-in (.po.gmo): Put gmo files in objdir.
	* configure, Makefile.in, doc/Makefile.in: Regenerated.
gas/
	* configure.in: Define GENINSRC_NEVER.
	* doc/Makefile.am (as.info): Remove srcdir prefix.
	(MAINTAINERCLEANFILES): Add info file.
	(DISTCLEANFILES): Pretend to add info file.
	* po/Make-in (.po.gmo): Put gmo files in objdir.
	* configure, Makefile.in, doc/Makefile.in: Regenerated.
gprof/
	* configure.in: Define GENINSRC_NEVER.
	* doc/Makefile.am (gprof.info): Remove srcdir prefix.
	(MAINTAINERCLEANFILES): Add info file.
	(DISTCLEANFILES): Pretend to add info file.
	* po/Make-in (.po.gmo): Put gmo files in objdir.
	* configure, Makefile.in: Regenerated.
ld/
	* configure.in: Define GENINSRC_NEVER.
	* doc/Makefile.am (ld.info): Remove srcdir prefix.
	(MAINTAINERCLEANFILES): Add info file.
	(DISTCLEANFILES): Pretend to add info file.
	* po/Make-in (.po.gmo): Put gmo files in objdir.
	* configure, Makefile.in: Regenerated.
opcodes/
	* po/Make-in (.po.gmo): Put gmo files in objdir.

2 files changed, 36 insertions, 23 deletions

diff --git a/gas/doc/Makefile.am b/gas/doc/Makefile.am
index 83f6a39..bfe4196 100644
--- a/gas/doc/Makefile.am
+++ b/gas/doc/Makefile.am
@@ -67,7 +67,7 @@ gasver.texi: $(srcdir)/../../bfd/configure
 	eval `grep '^ *VERSION=' $(srcdir)/../../bfd/configure`; \
 	  echo "@set VERSION $$VERSION" > $@
 
-$(srcdir)/as.info as.dvi as.html: $(srcdir)/as.texinfo asconfig.texi gasver.texi $(CPU_DOCS)
+as.info as.dvi as.html: $(srcdir)/as.texinfo asconfig.texi gasver.texi $(CPU_DOCS)
 
 # We want install to imply install-info as per GNU standards, despite the
 # cygnus option.
@@ -121,3 +121,12 @@ as.1: $(srcdir)/as.texinfo asconfig.texi gasver.texi $(CPU_DOCS)
 	        mv -f $@.T$$$$ $@) || \
 	        (rm -f $@.T$$$$ && exit 1)
 	rm -f as.pod
+
+MAINTAINERCLEANFILES += as.info
+
+# Automake 1.9 will only build info files in the objdir if they are
+# mentioned in DISTCLEANFILES.  It doesn't have to be unconditional,
+# though, so we use a bogus condition.
+if GENINSRC_NEVER
+DISTCLEANFILES = as.info
+endif
diff --git a/gas/doc/Makefile.in b/gas/doc/Makefile.in
index b692eaf..e70a955 100644
--- a/gas/doc/Makefile.in
+++ b/gas/doc/Makefile.in
@@ -53,7 +53,7 @@ CONFIG_CLEAN_FILES =
 depcomp =
 am__depfiles_maybe =
 SOURCES =
-INFO_DEPS = $(srcdir)/as.info
+INFO_DEPS = as.info
 TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex
 am__TEXINFO_TEX_DIR = $(top_srcdir)/../texinfo
 DVIS = as.dvi
@@ -96,7 +96,10 @@ EGREP = @EGREP@
 EXEEXT = @EXEEXT@
 GDBINIT = @GDBINIT@
 GENCAT = @GENCAT@
+GENINSRC_NEVER_FALSE = @GENINSRC_NEVER_FALSE@
+GENINSRC_NEVER_TRUE = @GENINSRC_NEVER_TRUE@
 GMSGFMT = @GMSGFMT@
+GREP = @GREP@
 INCINTL = @INCINTL@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -142,9 +145,8 @@ VERSION = @VERSION@
 WARN_CFLAGS = @WARN_CFLAGS@
 XGETTEXT = @XGETTEXT@
 YACC = @YACC@
+YFLAGS = @YFLAGS@
 ac_ct_CC = @ac_ct_CC@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
 am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
 am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
 am__include = @am__include@
@@ -163,6 +165,7 @@ cgen_cpu_prefix = @cgen_cpu_prefix@
 datadir = @datadir@
 datarootdir = @datarootdir@
 docdir = @docdir@
+dvidir = @dvidir@
 exec_prefix = @exec_prefix@
 extra_objects = @extra_objects@
 host = @host@
@@ -177,13 +180,16 @@ install_sh = @install_sh@
 install_tooldir = @install_tooldir@
 libdir = @libdir@
 libexecdir = @libexecdir@
+localedir = @localedir@
 localstatedir = @localstatedir@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 obj_format = @obj_format@
 oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
+psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 sysconfdir = @sysconfdir@
@@ -250,14 +256,19 @@ html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
 
 # This one isn't ready for prime time yet.  Not even a little bit.
 noinst_TEXINFOS = internals.texi
-MAINTAINERCLEANFILES = asconfig.texi gasver.texi
+MAINTAINERCLEANFILES = asconfig.texi gasver.texi as.info
 BASEDIR = $(srcdir)/../..
 BFDDIR = $(BASEDIR)/bfd
 CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/configure.in
+
+# Automake 1.9 will only build info files in the objdir if they are
+# mentioned in DISTCLEANFILES.  It doesn't have to be unconditional,
+# though, so we use a bogus condition.
+@GENINSRC_NEVER_TRUE@DISTCLEANFILES = as.info
 all: all-am
 
 .SUFFIXES:
-.SUFFIXES: .dvi .html .info .pdf .ps .texinfo
+.SUFFIXES: .dvi .ps
 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 	@for dep in $?; do \
 	  case '$(am__configure_deps)' in \
@@ -297,42 +308,38 @@ clean-libtool:
 distclean-libtool:
 	-rm -f libtool
 
-.texinfo.info:
+as.info: as.texinfo 
 	restore=: && backupdir="$(am__leading_dot)am$$$$" && \
-	am__cwd=`pwd` && cd $(srcdir) && \
 	rm -rf $$backupdir && mkdir $$backupdir && \
 	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
 	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
 	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
 	  done; \
 	else :; fi && \
-	cd "$$am__cwd"; \
 	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-	 -o $@ $<; \
+	 -o $@ `test -f 'as.texinfo' || echo '$(srcdir)/'`as.texinfo; \
 	then \
 	  rc=0; \
-	  cd $(srcdir); \
 	else \
 	  rc=$$?; \
-	  cd $(srcdir) && \
 	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
 	fi; \
 	rm -rf $$backupdir; exit $$rc
 
-.texinfo.dvi:
+as.dvi: as.texinfo  
 	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
 	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
-	$(TEXI2DVI) $<
+	$(TEXI2DVI) -o $@ `test -f 'as.texinfo' || echo '$(srcdir)/'`as.texinfo
 
-.texinfo.pdf:
+as.pdf: as.texinfo  
 	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
 	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
-	$(TEXI2PDF) $<
+	$(TEXI2PDF) -o $@ `test -f 'as.texinfo' || echo '$(srcdir)/'`as.texinfo
 
-.texinfo.html:
+as.html: as.texinfo  
 	rm -rf $(@:.html=.htp)
 	if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-	 -o $(@:.html=.htp) $<; \
+	 -o $(@:.html=.htp) `test -f 'as.texinfo' || echo '$(srcdir)/'`as.texinfo; \
 	then \
 	  rm -rf $@; \
 	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
@@ -342,10 +349,6 @@ distclean-libtool:
 	    rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
 	  exit 1; \
 	fi
-$(srcdir)/as.info: as.texinfo 
-as.dvi: as.texinfo 
-as.pdf: as.texinfo 
-as.html: as.texinfo 
 .dvi.ps:
 	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
 	$(DVIPS) -o $@ $<
@@ -477,6 +480,7 @@ clean-generic:
 
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -587,7 +591,7 @@ gasver.texi: $(srcdir)/../../bfd/configure
 	eval `grep '^ *VERSION=' $(srcdir)/../../bfd/configure`; \
 	  echo "@set VERSION $$VERSION" > $@
 
-$(srcdir)/as.info as.dvi as.html: $(srcdir)/as.texinfo asconfig.texi gasver.texi $(CPU_DOCS)
+as.info as.dvi as.html: $(srcdir)/as.texinfo asconfig.texi gasver.texi $(CPU_DOCS)
 
 # We want install to imply install-info as per GNU standards, despite the
 # cygnus option.