PRU GAS Port

	* NEWS: Mention new PRU target.
	* Makefile.am: Add PRU target.
	* config/obj-elf.c: Ditto.
	* configure.tgt: Ditto.
	* config/tc-pru.c: New file.
	* config/tc-pru.h: New file.
	* doc/Makefile.am: Add documentation for PRU GAS port.
	* doc/all.texi, Ditto.
	* doc/as.texinfo: Ditto.
	* doc/c-pru.texi: Document PRU GAS options.
	* Makefile.in: Regenerate.
	* doc/Makefile.in: Regenerate.
	* po/POTFILES.in: Regenerate.
	* testsuite/gas/pru/alu.d: New file for PRU GAS testsuite.
	* testsuite/gas/pru/alu.s: Ditto.
	* testsuite/gas/pru/branch.d: Ditto.
	* testsuite/gas/pru/branch.s: Ditto.
	* testsuite/gas/pru/illegal.l: Ditto.
	* testsuite/gas/pru/illegal.s: Ditto.
	* testsuite/gas/pru/ldi.d: Ditto.
	* testsuite/gas/pru/ldi.s: Ditto.
	* testsuite/gas/pru/ldst.d: Ditto.
	* testsuite/gas/pru/ldst.s: Ditto.
	* testsuite/gas/pru/loop.d: Ditto.
	* testsuite/gas/pru/loop.s: Ditto.
	* testsuite/gas/pru/misc.d: Ditto.
	* testsuite/gas/pru/misc.s: Ditto.
	* testsuite/gas/pru/pru.exp: Ditto.
	* testsuite/gas/pru/pseudo.d: Ditto.
	* testsuite/gas/pru/pseudo.s: Ditto.
	* testsuite/gas/pru/warn_reglabel.l: Ditto.
	* testsuite/gas/pru/warn_reglabel.s: Ditto.
	* testsuite/gas/pru/xfr.d: Ditto.
	* testsuite/gas/pru/xfr.s: Ditto.
	* testsuite/gas/lns/lns.exp: Mark lns-common-1-alt variant for PRU.

Signed-off-by: Dimitar Dimitrov <dimitar@dinux.eu>

5 files changed, 185 insertions, 0 deletions

diff --git a/gas/doc/Makefile.am b/gas/doc/Makefile.am
index 54d7ef1..c604a29 100644
--- a/gas/doc/Makefile.am
+++ b/gas/doc/Makefile.am
@@ -80,6 +80,7 @@ CPU_DOCS = \
 	c-pdp11.texi \
 	c-pj.texi \
 	c-ppc.texi \
+	c-pru.texi \
 	c-rl78.texi \
 	c-riscv.texi \
 	c-rx.texi \
diff --git a/gas/doc/Makefile.in b/gas/doc/Makefile.in
index 7110192..58b0e36 100644
--- a/gas/doc/Makefile.in
+++ b/gas/doc/Makefile.in
@@ -355,6 +355,7 @@ CPU_DOCS = \
 	c-pdp11.texi \
 	c-pj.texi \
 	c-ppc.texi \
+	c-pru.texi \
 	c-rl78.texi \
 	c-riscv.texi \
 	c-rx.texi \
diff --git a/gas/doc/all.texi b/gas/doc/all.texi
index 3c25d39..79fcaba 100644
--- a/gas/doc/all.texi
+++ b/gas/doc/all.texi
@@ -62,6 +62,7 @@
 @set PDP11
 @set PJ
 @set PPC
+@set PRU
 @set RL78
 @set RISCV
 @set RX
diff --git a/gas/doc/as.texinfo b/gas/doc/as.texinfo
index d83d2b3..f03c2ef 100644
--- a/gas/doc/as.texinfo
+++ b/gas/doc/as.texinfo
@@ -493,6 +493,13 @@ gcc(1), ld(1), and the Info entries for @file{binutils} and @file{ld}.
    [@b{-msolaris}|@b{-mno-solaris}]
    [@b{-nops=@var{count}}]
 @end ifset
+@ifset PRU
+
+@emph{Target PRU options:}
+   [@b{-link-relax}]
+   [@b{-mnolink-relax}]
+   [@b{-mno-warn-regname-label}]
+@end ifset
 @ifset RL78
 
 @emph{Target RL78 options:}
@@ -1232,6 +1239,24 @@ Generate ``little endian'' format output.
 @end table
 @end ifset
 
+@ifset PRU
+
+@ifclear man
+@xref{PRU Options}, for the options available when @value{AS} is configured
+for a PRU processor.
+@end ifclear
+
+@ifset man
+@c man begin OPTIONS
+The following options are available when @value{AS} is configured for a
+PRU processor.
+@c man end
+@c man begin INCLUDE
+@include c-pru.texi
+@c ended inside the included file
+@end ifset
+@end ifset
+
 @ifset M68HC11
 The following options are available when @value{AS} is configured for the
 Motorola 68HC11 or 68HC12 series.
@@ -7596,6 +7621,9 @@ subject, see the hardware manufacturer's manual.
 @ifset PPC
 * PPC-Dependent::               PowerPC Dependent Features
 @end ifset
+@ifset PRU
+* PRU-Dependent::               PRU Dependent Features
+@end ifset
 @ifset RL78
 * RL78-Dependent::              RL78 Dependent Features
 @end ifset
@@ -7825,6 +7853,10 @@ family.
 @include c-ppc.texi
 @end ifset
 
+@ifset PRU
+@include c-pru.texi
+@end ifset
+
 @ifset RL78
 @include c-rl78.texi
 @end ifset
diff --git a/gas/doc/c-pru.texi b/gas/doc/c-pru.texi
new file mode 100644
index 0000000..6aba8b4
--- /dev/null
+++ b/gas/doc/c-pru.texi
@@ -0,0 +1,150 @@
+@c Copyright (C) 2015-2016 Free Software Foundation, Inc.
+@c This is part of the GAS manual.
+@c For copying conditions, see the file as.texinfo.
+@c man end
+@ifset GENERIC
+@page
+@node PRU-Dependent
+@chapter PRU Dependent Features
+@end ifset
+
+@cindex PRU support
+@menu
+* PRU Options::              Options
+* PRU Syntax::               Syntax
+* PRU Relocations::          Relocations
+* PRU Directives::           PRU Machine Directives
+* PRU Opcodes::              Opcodes
+@end menu
+
+@node PRU Options
+@section Options
+@cindex PRU options
+@cindex options for PRU
+
+@c man begin OPTIONS
+@table @gcctabopt
+
+@cindex @code{mlink-relax} command line option, PRU
+@item -mlink-relax
+Assume that LD would optimize LDI32 instructions by checking the upper
+16 bits of the @var{expression}. If they are all zeros, then LD would
+shorten the LDI32 instruction to a single LDI. In such case @code{@value{AS}}
+will output DIFF relocations for diff expressions.
+
+@cindex @code{mno-link-relax} command line option, PRU
+@item -mno-link-relax
+Assume that LD would not optimize LDI32 instructions. As a consequence,
+DIFF relocations will not be emitted.
+
+@cindex @code{mno-warn-regname-label} command line option, PRU
+@item -mno-warn-regname-label
+Do not warn if a label name matches a register name. Usually assembler
+programmers will want this warning to be emitted. C compilers may want
+to turn this off.
+
+@end table
+@c man end
+
+@node PRU Syntax
+@section Syntax
+@menu
+* PRU Chars::                Special Characters
+@end menu
+
+
+@node PRU Chars
+@subsection Special Characters
+
+@cindex line comment character, PRU
+@cindex PRU line comment character
+@samp{#} and @samp{;} are the line comment characters.
+
+
+@node PRU Relocations
+@section PRU Machine Relocations
+
+@cindex machine relocations, PRU
+@cindex PRU machine relocations
+
+@table @code
+
+@cindex @code{pmem} directive, PRU
+@item %pmem(@var{expression})
+Convert @var{expression} from byte-address to a
+word-address.  In other words, shift right by two.
+
+@item %label(@var{expression})
+Mark the given operand as a label. This is useful if you need to jump to
+a label that matches a register name.
+
+@smallexample
+@group
+r1:
+    jmp r1		; Will jump to register R1
+    jmp %label(r1)	; Will jump to label r1
+@end group
+@end smallexample
+
+@end table
+
+
+@node PRU Directives
+@section PRU Machine Directives
+
+@cindex machine directives, PRU
+@cindex PRU machine directives
+
+@table @code
+
+@cindex @code{align} directive, PRU
+@item .align @var{expression} [, @var{expression}]
+This is the generic @code{.align} directive, however
+this aligns to a power of two.
+
+@cindex @code{word} directive, PRU
+@item .word @var{expression}
+Create an aligned constant 4 bytes in size.
+
+@cindex @code{dword} directive, PRU
+@item .dword @var{expression}
+Create an aligned constant 8 bytes in size.
+
+@cindex @code{2byte} directive, PRU
+@item .2byte @var{expression}
+Create an unaligned constant 2 bytes in size.
+
+@cindex @code{4byte} directive, PRU
+@item .4byte @var{expression}
+Create an unaligned constant 4 bytes in size.
+
+@cindex @code{8byte} directive, PRU
+@item .8byte @var{expression}
+Create an unaligned constant 8 bytes in size.
+
+@cindex @code{16byte} directive, PRU
+@item .16byte @var{expression}
+Create an unaligned constant 16 bytes in size.
+
+@cindex @code{set no_warn_regname_label} directive, PRU
+@item .set no_warn_regname_label
+Do not output warnings when a label name matches a register name. Equivalent
+to passing the @code{-mno-warn-regname-label} command line option.
+
+@end table
+
+@node PRU Opcodes
+@section Opcodes
+
+@cindex PRU opcodes
+@cindex opcodes for PRU
+@code{@value{AS}} implements all the standard PRU core V3 opcodes in the
+original pasm assembler.  Older cores are not supported by @code{@value{AS}}.
+
+GAS also implements the LDI32 pseudo instruction for loading a 32-bit
+immediate value into a register.
+
+@smallexample
+       ldi32   sp, __stack_top
+       ldi32   r14, 0x12345678
+@end smallexample