2006-04-06 Carlos O'Donell <carlos@codesourcery.com>

	* Makefile.tpl: Add install-html target.
	* Makefile.def: Add install-html target.
	* Makefile.in: Regenerate.
	* configure.in: Add --with-datarootdir, --with-docdir,
	and --with-htmldir options.
	* configure: Regenerate.

bfd/

2006-04-06  Carlos O'Donell  <carlos@codesourcery.com>

	* po/Make-in: Add install-html target.
	* Makefile.am: Rename docdir to bfddocdir. Add datarootdir, docdir
	htmldir. Add install-html and install-html-recursive targets.
	* Makefile.in: Regenerate.
	* configure.in: AC_SUBST for datarootdir, docdir and htmldir.
	* configure: Regenerate.

bfd/doc/

2006-04-06  Carlos O'Donell  <carlos@codesourcery.com>

	* Makefile.am: Add install-html and install-html-am targets.
	Define datarootdir, docdir and htmldir.
	* Makefile.in: Regenerate.

binutils/

2006-04-06  Carlos O'Donell  <carlos@codesourcery.com>

	* po/Make-in: Add install-html target.
	* Makefile.am: Add install-html and install-html-recursive targets.
	* Makefile.in: Regenerate.
	* configure.in: AC_SUBST datarootdir, docdir and htmldir.
	* configure: Regenerate.
	* doc/Makefile.am: Add install-html and install-html-am targets.
	* doc/Makefile.in: Regenerate.

etc/

2006-04-06  Carlos O'Donell  <carlos@codesourcery.com>

	* Makefile.in: Add install-html target. Add htmldir,
	docdir and datarootdir.
	* configure.texi: Document install-html target.
	* configure.in: AC_SUBST datarootdir, docdir, htmldir.
	* configure: Regenerate.

gas/

2006-04-06  Carlos O'Donell  <carlos@codesourcery.com>

	* po/Make-in: Add install-html target.
	* Makefile.am: Add install-html and install-html-recursive targets.
	* Makefile.in: Regenerate.
	* configure.in: AC_SUBST datarootdir, docdir, htmldir.
	* configure: Regenerate.
	* doc/Makefile.am: Add install-html and install-html-am targets.
	* doc/Makefile.in: Regenerate.

gprof/

2006-04-06  Carlos O'Donell  <carlos@codesourcery.com>

	* po/Make-in: Add install-html target.
	* Makefile.am: Add install-html, install-html-am and
	install-html-recursive targets.
	* Makefile.in: Regenerate.
	* configure.in: AC_SUBST datarootdir, docdir, htmldir.
	* configure: Regenerate.

intl/

2006-04-06  Carlos O'Donell  <carlos@codesourcery.com>

	* intl/Makefile.in: Add html info and dvi and install-html to .PHONY
	Add install-html target.

ld/

2006-04-06  Carlos O'Donell  <carlos@codesourcery.com>

	* Makefile.am: Add install-html, install-html-am, and
	install-html-recursive targets.
	* Makefile.in: Regenerate.
	* configure.in: AC_SUBST datarootdir, docdir, htmldir.
	* configure: Regenerate.
	* po/Make-in: Add install-html target.

opcodes/

2006-04-06  Carlos O'Donell  <carlos@codesourcery.com>

	* Makefile.am: Add install-html target.
	* Makefile.in: Regenerate.

2 files changed, 44 insertions, 0 deletions

diff --git a/gas/doc/Makefile.am b/gas/doc/Makefile.am
index e564a25..cc806ca 100644
--- a/gas/doc/Makefile.am
+++ b/gas/doc/Makefile.am
@@ -70,6 +70,27 @@ $(srcdir)/as.info as.dvi as.html: $(srcdir)/as.texinfo asconfig.texi gasver.texi
 # cygnus option.
 install-data-local: install-info
 
+html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+
+install-html: install-html-am
+
+install-html-am: $(HTMLS)
+	@$(NORMAL_INSTALL)
+	test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
+	@list='$(HTMLS)'; for p in $$list; do \
+	  if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
+	  f=$(html__strip_dir) \
+	  if test -d "$$d$$p"; then \
+	    echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
+	    $(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
+	    echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
+	    $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
+	  else \
+	    echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
+	    $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
+	  fi; \
+	done
+
 # This one isn't ready for prime time yet.  Not even a little bit.
 
 noinst_TEXINFOS = internals.texi
diff --git a/gas/doc/Makefile.in b/gas/doc/Makefile.in
index 295835a..687e472 100644
--- a/gas/doc/Makefile.in
+++ b/gas/doc/Makefile.in
@@ -170,6 +170,8 @@ build_os = @build_os@
 build_vendor = @build_vendor@
 cgen_cpu_prefix = @cgen_cpu_prefix@
 datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
 exec_prefix = @exec_prefix@
 extra_objects = @extra_objects@
 host = @host@
@@ -177,6 +179,7 @@ host_alias = @host_alias@
 host_cpu = @host_cpu@
 host_os = @host_os@
 host_vendor = @host_vendor@
+htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
@@ -250,6 +253,7 @@ CPU_DOCS = \
 	c-z80.texi \
 	c-z8k.texi
 
+html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
 
 # This one isn't ready for prime time yet.  Not even a little bit.
 noinst_TEXINFOS = internals.texi
@@ -594,6 +598,25 @@ $(srcdir)/as.info as.dvi as.html: $(srcdir)/as.texinfo asconfig.texi gasver.texi
 # cygnus option.
 install-data-local: install-info
 
+install-html: install-html-am
+
+install-html-am: $(HTMLS)
+	@$(NORMAL_INSTALL)
+	test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
+	@list='$(HTMLS)'; for p in $$list; do \
+	  if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
+	  f=$(html__strip_dir) \
+	  if test -d "$$d$$p"; then \
+	    echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
+	    $(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
+	    echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
+	    $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
+	  else \
+	    echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
+	    $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
+	  fi; \
+	done
+
 # Maintenance
 
 # We need it for the taz target in ../../Makefile.in.