Generated filesusers/simark/autotools-bump

1 files changed, 191 insertions, 86 deletions

diff --git a/gas/doc/Makefile.in b/gas/doc/Makefile.in
index a126e2f..ba9485c 100644
--- a/gas/doc/Makefile.in
+++ b/gas/doc/Makefile.in
@@ -1,9 +1,8 @@
-# Makefile.in generated by automake 1.11.6 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
+
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -33,23 +32,61 @@
 # <http://www.gnu.org/licenses/>.
 #
 VPATH = @srcdir@
-am__make_dryrun = \
-  { \
-    am__dry=no; \
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
     case $$MAKEFLAGS in \
       *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
-      *) \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
-          esac; \
-        done;; \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
     esac; \
-    test $$am__dry = yes; \
-  }
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -70,8 +107,6 @@ build_triplet = @build@
 host_triplet = @host@
 target_triplet = @target@
 subdir = doc
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
-	$(as_TEXINFOS)
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/../bfd/acinclude.m4 \
 	$(top_srcdir)/../bfd/warning.m4 $(top_srcdir)/../config/acx.m4 \
@@ -92,21 +127,61 @@ am__aclocal_m4_deps = $(top_srcdir)/../bfd/acinclude.m4 \
 	$(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
 mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
 CONFIG_CLEAN_VPATH_FILES =
-depcomp =
-am__depfiles_maybe =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
 SOURCES =
+DIST_SOURCES =
+AM_V_DVIPS = $(am__v_DVIPS_@AM_V@)
+am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@)
+am__v_DVIPS_0 = @echo "  DVIPS   " $@;
+am__v_DVIPS_1 = 
+AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@)
+am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@)
+am__v_MAKEINFO_0 = @echo "  MAKEINFO" $@;
+am__v_MAKEINFO_1 = 
+AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@)
+am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@)
+am__v_INFOHTML_0 = @echo "  INFOHTML" $@;
+am__v_INFOHTML_1 = 
+AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@)
+am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@)
+am__v_TEXI2DVI_0 = @echo "  TEXI2DVI" $@;
+am__v_TEXI2DVI_1 = 
+AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@)
+am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@)
+am__v_TEXI2PDF_0 = @echo "  TEXI2PDF" $@;
+am__v_TEXI2PDF_1 = 
+AM_V_texinfo = $(am__v_texinfo_@AM_V@)
+am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@)
+am__v_texinfo_0 = -q
+am__v_texinfo_1 = 
+AM_V_texidevnull = $(am__v_texidevnull_@AM_V@)
+am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@)
+am__v_texidevnull_0 = > /dev/null
+am__v_texidevnull_1 = 
 INFO_DEPS = as.info
-TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex
-am__TEXINFO_TEX_DIR = $(top_srcdir)/../texinfo
+TEXINFO_TEX = $(top_srcdir)/../texinfo.tex
+am__TEXINFO_TEX_DIR = $(top_srcdir)/..
 DVIS = as.dvi
 PDFS = as.pdf
 PSS = as.ps
 HTMLS = as.html
-TEXINFOS = as.texinfo
+TEXINFOS = as.texi
 TEXI2PDF = $(TEXI2DVI) --pdf --batch
 MAKEINFOHTML = $(MAKEINFO) --html
 AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
@@ -116,6 +191,7 @@ am__can_run_installinfo = \
     n|no|NO) false;; \
     *) (install-info --version) >/dev/null 2>&1;; \
   esac
+am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
@@ -144,12 +220,16 @@ am__uninstall_files_from_dir = { \
          $(am__cd) "$$dir" && rm -f $$files; }; \
   }
 man1dir = $(mandir)/man1
-am__installdirs = "$(DESTDIR)$(man1dir)"
 NROFF = nroff
 MANS = $(man_MANS)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(as_TEXINFOS) $(srcdir)/Makefile.in \
+	$(top_srcdir)/../mkinstalldirs
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 ACLOCAL = @ACLOCAL@
 ALLOCA = @ALLOCA@
 AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 AR = @AR@
 AUTOCONF = @AUTOCONF@
 AUTOHEADER = @AUTOHEADER@
@@ -300,19 +380,19 @@ top_builddir = @top_builddir@
 top_srcdir = @top_srcdir@
 zlibdir = @zlibdir@
 zlibinc = @zlibinc@
-AUTOMAKE_OPTIONS = 1.8 cygnus
+AUTOMAKE_OPTIONS = 1.8 info-in-builddir no-texinfo.tex
 
 # What version of the manual you want; "all" includes everything
 CONFIG = all
 
-# Options to extract the man page from as.texinfo
+# Options to extract the man page from as.texi
 MANCONF = -Dman
 TEXI2POD = perl $(BASEDIR)/etc/texi2pod.pl $(AM_MAKEINFOFLAGS)
 POD2MAN = pod2man --center="GNU Development Tools" \
 	--release="binutils-$(VERSION)" --section=1
 
 man_MANS = as.1
-info_TEXINFOS = as.texinfo
+info_TEXINFOS = as.texi
 as_TEXINFOS = asconfig.texi $(CPU_DOCS)
 AM_MAKEINFOFLAGS = -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
 		   -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc
@@ -380,11 +460,6 @@ noinst_TEXINFOS = internals.texi
 MAINTAINERCLEANFILES = asconfig.texi as.info
 BASEDIR = $(srcdir)/../..
 BFDDIR = $(BASEDIR)/bfd
-
-# Automake 1.9 will only build info files in the objdir if they are
-# mentioned in DISTCLEANFILES.  It doesn't have to be unconditional,
-# though, so we use a bogus condition.
-@GENINSRC_NEVER_TRUE@DISTCLEANFILES = as.info
 all: all-am
 
 .SUFFIXES:
@@ -398,10 +473,9 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
 	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign doc/Makefile
-.PRECIOUS: Makefile
+	  $(AUTOMAKE) --gnu doc/Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
@@ -426,8 +500,8 @@ mostlyclean-libtool:
 clean-libtool:
 	-rm -rf .libs _libs
 
-as.info: as.texinfo $(as_TEXINFOS)
-	restore=: && backupdir="$(am__leading_dot)am$$$$" && \
+as.info: as.texi $(as_TEXINFOS)
+	$(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \
 	rm -rf $$backupdir && mkdir $$backupdir && \
 	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
 	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
@@ -435,7 +509,7 @@ as.info: as.texinfo $(as_TEXINFOS)
 	  done; \
 	else :; fi && \
 	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-	 -o $@ `test -f 'as.texinfo' || echo '$(srcdir)/'`as.texinfo; \
+	 -o $@ `test -f 'as.texi' || echo '$(srcdir)/'`as.texi; \
 	then \
 	  rc=0; \
 	else \
@@ -444,32 +518,30 @@ as.info: as.texinfo $(as_TEXINFOS)
 	fi; \
 	rm -rf $$backupdir; exit $$rc
 
-as.dvi: as.texinfo $(as_TEXINFOS) 
-	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+as.dvi: as.texi $(as_TEXINFOS) 
+	$(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
 	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
-	$(TEXI2DVI) -o $@ `test -f 'as.texinfo' || echo '$(srcdir)/'`as.texinfo
+	$(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \
+	`test -f 'as.texi' || echo '$(srcdir)/'`as.texi
 
-as.pdf: as.texinfo $(as_TEXINFOS) 
-	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+as.pdf: as.texi $(as_TEXINFOS) 
+	$(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
 	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
-	$(TEXI2PDF) -o $@ `test -f 'as.texinfo' || echo '$(srcdir)/'`as.texinfo
+	$(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \
+	`test -f 'as.texi' || echo '$(srcdir)/'`as.texi
 
-as.html: as.texinfo $(as_TEXINFOS) 
-	rm -rf $(@:.html=.htp)
-	if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
-	 -o $(@:.html=.htp) `test -f 'as.texinfo' || echo '$(srcdir)/'`as.texinfo; \
+as.html: as.texi $(as_TEXINFOS) 
+	$(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
+	$(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
+	 -o $(@:.html=.htp) `test -f 'as.texi' || echo '$(srcdir)/'`as.texi; \
 	then \
-	  rm -rf $@; \
-	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
-	    mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
+	  rm -rf $@ && mv $(@:.html=.htp) $@; \
 	else \
-	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
-	    rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
-	  exit 1; \
+	  rm -rf $(@:.html=.htp); exit 1; \
 	fi
 .dvi.ps:
-	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
-	$(DVIPS) -o $@ $<
+	$(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+	$(DVIPS) $(AM_V_texinfo) -o $@ $<
 
 uninstall-dvi-am:
 	@$(NORMAL_UNINSTALL)
@@ -548,8 +620,7 @@ dist-info: $(INFO_DEPS)
 	done
 
 mostlyclean-aminfo:
-	-rm -rf as.aux as.cp as.cps as.fn as.fns as.ky as.log as.pg as.pgs as.tmp \
-	  as.toc as.tp as.tps as.vr as.vrs
+	-rm -rf as.t2d as.t2p
 
 clean-aminfo:
 	-test -z "as.dvi as.pdf as.ps as.html" \
@@ -561,8 +632,6 @@ maintainer-clean-aminfo:
 	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
 	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
 	done
-
-clean-info: mostlyclean-aminfo clean-aminfo
 install-man1: $(man_MANS)
 	@$(NORMAL_INSTALL)
 	@list1=''; \
@@ -606,17 +675,51 @@ uninstall-man1:
 	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
 	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
 	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-check-am:
+tags TAGS:
+
+ctags CTAGS:
+
+cscope cscopelist:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	$(MAKE) $(AM_MAKEFLAGS) \
+	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
+	  dist-info
+check-am: all-am
 check: check-am
-all-am: Makefile $(MANS)
+all-am: Makefile $(INFO_DEPS) $(MANS)
 installdirs:
-	for dir in "$(DESTDIR)$(man1dir)"; do \
+	for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \
 	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
 install: install-am
@@ -645,7 +748,6 @@ clean-generic:
 distclean-generic:
 	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -671,7 +773,7 @@ info: info-am
 
 info-am: $(INFO_DEPS) info-local
 
-install-data-am: install-data-local install-man
+install-data-am: install-data-local install-info-am install-man
 
 install-dvi: install-dvi-am
 
@@ -816,20 +918,23 @@ uninstall-man: uninstall-man1
 .MAKE: install-am install-strip
 
 .PHONY: all all-am check check-am clean clean-aminfo clean-generic \
-	clean-info clean-libtool dist-info distclean distclean-generic \
-	distclean-libtool dvi dvi-am html html-am info info-am \
-	info-local install install-am install-data install-data-am \
-	install-data-local install-dvi install-dvi-am install-exec \
-	install-exec-am install-html install-html-am install-info \
-	install-info-am install-man install-man1 install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installdirs maintainer-clean \
-	maintainer-clean-aminfo maintainer-clean-generic mostlyclean \
-	mostlyclean-aminfo mostlyclean-generic mostlyclean-libtool pdf \
-	pdf-am ps ps-am uninstall uninstall-am uninstall-dvi-am \
+	clean-libtool cscopelist-am ctags-am dist-info distclean \
+	distclean-generic distclean-libtool distdir dvi dvi-am html \
+	html-am info info-am info-local install install-am \
+	install-data install-data-am install-data-local install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-man1 install-pdf install-pdf-am install-ps \
+	install-ps-am install-strip installcheck installcheck-am \
+	installdirs maintainer-clean maintainer-clean-aminfo \
+	maintainer-clean-generic mostlyclean mostlyclean-aminfo \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+	tags-am uninstall uninstall-am uninstall-dvi-am \
 	uninstall-html-am uninstall-info-am uninstall-man \
 	uninstall-man1 uninstall-pdf-am uninstall-ps-am
 
+.PRECIOUS: Makefile
+
 
 asconfig.texi: $(CONFIG).texi
 	rm -f asconfig.texi
@@ -848,9 +953,9 @@ info-local: $(MANS)
 # Build the man page from the texinfo file
 # The sed command removes the no-adjust Nroff command so that
 # the man output looks standard.
-as.1: $(srcdir)/as.texinfo asconfig.texi $(CPU_DOCS)
+as.1: $(srcdir)/as.texi asconfig.texi $(CPU_DOCS)
 	touch $@
-	-$(TEXI2POD) $(MANCONF) < $(srcdir)/as.texinfo > as.pod
+	-$(TEXI2POD) $(MANCONF) < $(srcdir)/as.texi > as.pod
 	-($(POD2MAN) as.pod | \
 	        sed -e '/^.if n .na/d' > $@.T$$$$ && \
 	        mv -f $@.T$$$$ $@) || \