binutils ChangeLog rotation

1 files changed, 0 insertions, 2043 deletions

diff --git a/gas/ChangeLog b/gas/ChangeLog
deleted file mode 100644
index 8b4af36..0000000
--- a/gas/ChangeLog
+++ /dev/null
@@ -1,2043 +0,0 @@
-2015-12-24  Thomas Preud'homme  <thomas.preudhomme@arm.com>
-
-	* config/tc-arm.c (arm_ext_v6t2_v8m): New feature for instructions
-	shared between ARMv6T2 and ARMv8-M.
-	(move_or_literal_pool): Check mov.w/mvn and movw availability against
-	arm_ext_v6t2 and arm_ext_v6t2_v8m respectively instead of checking
-	arm_arch_t2.
-	(do_t_branch): Error out for wide conditional branch instructions if
-	targetting ARMv8-M Baseline.
-	(non_v6t2_wide_only_insn): Add the logic for new wide-only instructions
-	in ARMv8-M Baseline.
-	(wide_insn_ok): New function.
-	(md_assemble): Use wide_insn_ok instead of non_v6t2_wide_only_insn and
-	adapt error message for unsupported wide instruction to ARMv8-M
-	Baseline.
-	(insns): Reorganize instructions shared by ARMv8-M Baseline and
-	ARMv6t2 architecture.
-	(arm_cpus): Set feature bit ARM_EXT2_V6T2_V8M for marvell-pj4 and
-	marvell-whitney cores.
-	(arm_archs): Define armv8-m.base architecture.
-	(cpu_arch_ver): Define ARM_ARCH_V8M_BASE architecture version.
-	(aeabi_set_public_attributes): Add logic to set Tag_CPU_arch to 17 for
-	ARMv8-M Mainline.  Set Tag_DIV_use for ARMv8-M Baseline as well.
-
-2015-12-24  Thomas Preud'homme  <thomas.preudhomme@arm.com>
-
-	* config/tc-arm.c (arm_ext_m): Include ARMv8-M.
-	(arm_ext_v8m): New feature for ARMv8-M.
-	(arm_ext_atomics): New feature for ARMv8 atomics.
-	(do_tt): New encoding function for TT* instructions.
-	(insns): Add new entries for ARMv8-M specific instructions and
-	reorganize the ones shared by ARMv8-M Mainline and ARMv8-A.
-	(arm_archs): Define armv8-m.main architecture.
-	(cpu_arch_ver): Define ARM_ARCH_V8M_MAIN architecture version and
-	clarify the ordering rule.
-	(aeabi_set_public_attributes): Use TAG_CPU_ARCH_* macro to refer to
-	Tag_CPU_arch values for ARMv7e-M detection.  Add logic to keep setting
-	Tag_CPU_arch to ARMv8-A for -march=all.  Also set Tag_CPU_arch_profile
-	to 'A' if extension bit for atomic instructions is set, unless it is
-	ARMv8-M.  Set Tag_THUMB_ISA_use to 3 for ARMv8-M.  Set Tag_DIV_use to 0
-	for ARMv8-M Mainline.
-
-2015-12-24  Thomas Preud'homme  <thomas.preudhomme@arm.com>
-
-	* config/tc-arm.c (move_or_literal_pool): Check mov.w, mvm and movw
-	availability against arm_ext_v6t2 instead of checking arm_arch_t2,
-	fixing comments along the way.
-	(handle_it_state): Check arm_ext_v6t2 instead of arm_arch_t2 to
-	generate IT instruction.
-	(t1_isa_t32_only_insn): New function.
-	(md_assemble): Use above new function to check for invalid wide
-	instruction for CPU Thumb ISA and to determine what Thumb extension
-	bit is necessary for that instruction.
-	(md_apply_fix): Use arm_ext_v6t2 instead of arm_arch_t2 to decide if
-	branch is out of range.
-
-2015-12-21  Nick Clifton  <nickc@redhat.com>
-
-	PR gas/19386
-	* doc/as.texinfo (Strings): Prepend a space to index entries that
-	start with a backslash.  This works around a problem in the pdf
-	generator.
-
-2015-12-18  H.J. Lu  <hongjiu.lu@intel.com>
-
-	* config/tc-i386.c (optimize_imm): Store 32-bit immediate in
-	64-bit only for 64-bit BFD.
-	(optimize_disp): Optimize 64-bit displacement to 32-bit only
-	for 64-bit BFD.
-
-2015-12-17  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>
-
-	* config/tc-arm.c (aeabi_set_public_attributes): Adjust
-	TAG_ARCH_profile for armv8-a.
-
-2015-12-16 Mickael Guene <mickael.guene@st.com>
-
-	* doc/c-arm.texi: Add documentation about new directives
-	* config/tc-arm.c (group_reloc_table): Add mapping between gas
-	syntax and new relocations.
-	(do_t_add_sub): Keep new relocations for add operand.
-	(do_t_mov_cmp): Keep new relocations for mov operand.
-	(insns): Use 'shifter operand with possible group relocation'
-	operand parse code for movs operand.
-	(md_apply_fix): Implement mov and add encoding when new
-	relocations on them.
-	(tc_gen_reloc): Add new relocations.
-	(arm_fix_adjustable): Since offset has a limited range ([0:255])
-	we disable adjust_reloc_syms() for new relocations.
-
-2015-12-15  Nick Clifton  <nickc@redhat.com>
-
-	* doc/c-msp430.texi (MSP430 Options): Remove references to a
-	non-existant silicon errata.
-	* config/tc-msp430.c: Likewise.
-
-2015-12-14  Matthew Wahab  <matthew.wahab@arm.com>
-
-	* config/tc-aarch64.c (parse_neon_type_for_operand): Adjust to
-	take into account new vector type 2H.
-	(vectype_to_qualifier): Likewise.
-
-2015-12-14  Matthew Wahab  <matthew.wahab@arm.com>
-
-	* config/tc-aarch64.c (vectype_to_qualifier): Calculate operand
-	qualifier from per-type base and offet.
-
-2015-12-14  Yoshinori Sato <ysato@users.sourceforge.jp>
-
-	* config/rx-defs.h(rx_cpu_type): Add RXV2 type.
-	* config/tc-rx.c(cpu_type_list): New type lookup table.
-	(md_parse_option): Use lookup table for choose cpu.
-	(md_show_usage): Add rxv2 for mcpu option.
-	* doc/c-rx.texi: Likewise.
-	* config/rx-parse.y: Add v2 instructions and ACC register.
-	(rx_check_v2): check v2 type.
-
-2015-12-14  Jan Beulich  <jbeulich@suse.com>
-
-	* dw2gencfi.c (dot_cfi_label): Free "name".
-
-2015-12-11  Matthew Wahab  <matthew.wahab@arm.com>
-
-	* config/tc-aarch64.c (aarch64_hint_opt_hsh): New.
-	(parse_barrier_psb): New.
-	(parse_operands): Add case for AARCH64_OPND_BARRIER_PSB.
-	(md_begin): Set up aarch64_hint_opt_hsh.
-
-2015-12-11  Matthew Wahab  <matthew.wahab@arm.com>
-
-	* config/tc-aarch64.c (aarch64_features): Add "profile".
-	* doc/c-aarch64.texi (AArch64 Extensions): Add "profile".
-
-2015-12-10  Matthew Wahab  <matthew.wahab@arm.com>
-
-	* config/tc-aarch64.c (parse_sys_ins_reg): Add check of
-	architectural support for system register.
-
-2015-12-10  Jose E. Marchesi  <jose.marchesi@oracle.com>
-
-	* doc/c-sparc.texi (Sparc-Regs): Document the %dN and %qN notation
-	for floating-point registers.
-
-2015-12-10  Matthew Wahab  <matthew.wahab@arm.com>
-
-	* doc/c-aarch64.texi (AArch64 Extensions): Update entry for crc.
-
-2015-12-10  Andrew Burgess  <andrew.burgess@embecosm.com>
-
-	* config/tc-arc.c (md_parse_option): Return 1 in order to accept
-	dummy arguments.
-
-2015-12-09  Jose E. Marchesi  <jose.marchesi@oracle.com>
-
-	* config/tc-sparc.c (sparc_ip): Support %dN and %qN notation for
-	double and quad-precision floating-point registers.
-
-2015-12-09  Nick Clifton  <nickc@redhat.com>
-
-	* config/tc-rx.c (rx_relax_frag): Fix compile time warning.
-
-2015-12-08  Jan Beulich  <jbeulich@suse.com>
-
-	* read.c (in_bss): New.
-	(do_align): Use it to also warn for non-zero fill in .bss.
-	(do_org): Likewise.
-	(s_space): Likewise.
-	(s_fill): Error on bad use in .bss/.struct.
-	(float_cons): Likewise.
-	(emit_leb128_expr): Likewise.
-	(emit_expr_with_reloc): Defer handling use inside .struct. Also
-	error on non-zero item added to .bss.
-	(stringer_append_char): Error on non-zero character.
-
-2015-12-08  Jan Beulich  <jbeulich@suse.com>
-
-	* read.c (stringer): Move absolute section check up. Return
-	right away.
-
-2015-12-08  Jan Beulich  <jbeulich@suse.com>
-
-	* config/obj-elf.c (elf_file_symbol): Tighten condition for
-	moving BSF_FILE symbols.
-
-2015-12-08  DJ Delorie  <dj@redhat.com>
-
-	* config/rl78-parse.y: Make all branches relaxable via
-	rl78_linkrelax_branch().
-	* config/tc-rl78.c (rl78_linkrelax_branch): Mark all relaxable
-	branches with relocs.
-	(options): Add OPTION_NORELAX.
-	(md_longopts): Add -mnorelax.
-	(md_parse_option): Support OPTION_NORELAX.
-	(op_type_T): Add bh, sk, call, and br.
-	(rl78_opcode_type): Likewise.
-	(rl78_relax_frag): Fix not-relaxing logic.  Add sk.
-	(md_convert_frag): Fix relocation handling.
-	(tc_gen_reloc): Strip relax relocs when not linker relaxing.
-	(md_apply_fix): Defer overflow handling for anything that needs a
-	PLT, to the linker.
-	* config/tc-rl78.h (TC_FORCE_RELOCATION): Force all relocations to
-	the linker when linker relaxing.
-	* doc/c-rl78.texi (norelax): Add.
-
-2015-12-07  Alan Modra  <amodra@gmail.com>
-
-	* config/tc-ppc.c (md_apply_fix): Localize variables.  Reduce casts.
-
-2015-12-04  Nick Clifton  <nickc@redhat.com>
-
-	PR gas/19276
-	* config/tc-arm.h (SUB_SEGMENT_ALIGN): Do not define for COFF/PE
-	targets.
-
-2015-12-04  Claudiu Zissulescu  <claziss@synopsys.com>
-
-	* config/tc-arc.c (arc_option): Sets all internal gas options when
-	parsing .cpu directive.
-	(declare_register_set): Declare all 64 registers.
-	(md_section_align): Refactor.
-	(md_pcrel_from_section): Remove assert.
-	(pseudo_operand_match): Fix pseudo operand match.
-	(find_reloc): Use flags filed, extend matching.
-	* config/tc-arc.h (TC_VALIDATE_FIX): Don't fixup any PLT
-	relocation.
-
-2015-12-01  Alan Modra  <amodra@gmail.com>
-
-	* config/aout_gnu.h: Invoke aout N_* macros with pointer to
-	struct internal_exec.
-
-2015-11-27  Matthew Wahab  <matthew.wahab@arm.com>
-
-	* config/tc-aarch64.c (aarch64_features): Add "fp16".
-	* doc/c-aarch64.texi (Architecture Extensions): Add "fp16".
-
-2015-11-24  Christophe Monat <christophe.monat@st.com>
-
-	* config/tc-arm.c (move_or_literal_pool): Do not transform ldr
-	ri,=imm into movs when ri is a high register in T1.
-
-2015-11-20  Nick Clifton  <nickc@redhat.com>
-
-	* po/fr.po: Updated French translation.
-	* po/uk.po: Updated Ukraninan translation.
-	* po/zh_CN.po: New simplified Chinese translation.
-	* configure.ac (ALL_LINGUAS): Add zh_CN.
-	* configure: Regenerate.
-
-2015-11-19  Matthew Wahab  <matthew.wahab@arm.com>
-
-	* config/tc-arm.c (arm_archs): Add "armv8.2-a".
-	* doc/c-arm.texi (-march): Add "armv8.2-a".
-
-2015-11-19  Matthew Wahab  <matthew.wahab@arm.com>
-
-	* config/tc-aarch64.c (aarch64_archs): Add "armv8.2-a".
-	* doc/c-aarch64.texi (-march): Likewise.
-
-2015-11-19  Alan Modra  <amodra@gmail.com>
-
-	* read.c (output_big_leb128): Describe "sign" parameter.
-
-2015-11-19  Alan Modra  <amodra@gmail.com>
-
-	* config/tc-ppc.h (SUB_SEGMENT_ALIGN): Define only for ELF.
-
-2015-11-16  Mike Frysinger  <vapier@gentoo.org>
-
-	* config/tc-microblaze.c (parse_imm): Add an offsetT cast.
-
-2015-11-13  Tristan Gingold  <gingold@adacore.com>
-
-	* configure: Regenerate.
-
-2015-11-13  Tristan Gingold  <gingold@adacore.com>
-
-	* NEWS: Add marker for 2.26.
-
-2015-11-12  James Greenhalgh  <james.greenhalgh@arm.com>
-
-	* config/tc-aarch64.c (aarch64_cpus): Add cortex-a35.
-	* doc/c-aarch64.texi (-mcpu=): Likewise.
-
-2015-11-12  James Greenhalgh  <james.greenhalgh@arm.com>
-
-	* config/tc-arm.c (arm_cpus): Likewise.
-	* doc/c-arm.texi (-mcpu=): Likewise.
-
-2015-11-12  Matthew Wahab  <matthew.wahab@arm.com>
-
-	PR gas/19217
-	* config/tc-arm.c (move_or_literal_pool): Remove redundant feature
-	check.  Fix some code formatting.  Drop use of MOVT.  Add some
-	comments.
-
-2015-11-11  Alan Modra  <amodra@gmail.com>
-	    Peter Bergner <bergner@vnet.ibm.com>
-
-	* doc/as.texinfo (Target PowerPC): Document -mpower9 and -mpwr9.
-	* doc/c-ppc.texi (PowerPC-Opts):  Likewise.
-	* config/tc-ppc.c (md_show_usage): Likewise.
-	(md_assemble): Handle BFD_RELOC_PPC_REL16DX_HA.
-	(md_apply_fix): Likewise.
-	(ppc_handle_align): Handle power9's group ending nop.
-
-2015-11-09  Jim Wilson  <jim.wilson@linaro.org>
-
-	* config/tc-aarch64.c (aarch64_cpus): Add qdf24xx.
-	* config/tc-arm.c (arm_cpus): Likewise.
-	* doc/c-arm.texi, doc/c-aarch64.texi: Likewise.
-
-2015-11-09  Dominik Vogt  <vogt@linux.vnet.ibm.com>
-
-	* read.c (parse_bitfield_cons): Fix left shift of negative value.
-	* config/tc-xstormy16.c (md_section_align): Likewise.
-	* config/tc-xgate.c (md_section_align): Likewise.
-	* config/tc-visium.c (md_section_align): Likewise.
-	* config/tc-v850.c (md_section_align): Likewise.
-	* config/tc-tic6x.c (md_section_align): Likewise.
-	* config/tc-sh.c (SH64PCREL32_M, SH64PCREL48_M, SH64PCREL32_M)
-	(MOVI_32_M, MOVI_48_M, MOVI_32_M, md_section_align): Likewise.
-	* config/tc-sh64.c (shmedia_md_estimate_size_before_relax): Likewise.
-	* config/tc-score.c (s3_section_align): Likewise.
-	* config/tc-score7.c (s7_section_align): Likewise.
-	* config/tc-s390.c (md_section_align): Likewise.
-	* config/tc-rx.c (md_section_align): Likewise.
-	* config/tc-rl78.c (md_section_align): Likewise.
-	* config/tc-ppc.c (md_section_align): Likewise.
-	* config/tc-or1k.c (md_section_align): Likewise.
-	* config/tc-nds32.c (md_section_align): Likewise.
-	* config/tc-mt.c (md_section_align): Likewise.
-	* config/tc-msp430.c (md_section_align): Likewise.
-	* config/tc-mn10300.c (md_section_align): Likewise.
-	* config/tc-mn10200.c (md_section_align): Likewise.
-	* config/tc-mips.c (md_section_align): Likewise.
-	* config/tc-microblaze.c (parse_imm): Likewise.
-	* config/tc-mep.c (md_section_align): Likewise.
-	* config/tc-m68k.c (md_section_align): Likewise.
-	* config/tc-m68hc11.c (md_section_align): Likewise.
-	* config/tc-m32r.c (md_section_align): Likewise.
-	* config/tc-m32c.c (md_section_align): Likewise.
-	* config/tc-lm32.c (md_section_align): Likewise.
-	* config/tc-iq2000.c (md_section_align): Likewise.
-	* config/tc-ip2k.c (md_section_align): Likewise.
-	* config/tc-ia64.c (dot_save, dot_vframe): Likewise.
-	* config/tc-i960.c (md_number_to_field, md_section_align): Likewise.
-	* config/tc-i386.c (md_section_align): Likewise.
-	* config/tc-i370.c (md_section_align): Likewise.
-	* config/tc-frv.c (md_section_align): Likewise.
-	* config/tc-fr30.c (md_section_align): Likewise.
-	* config/tc-epiphany.c (md_section_align): Likewise.
-	* config/tc-d30v.c (md_section_align): Likewise.
-	* config/tc-d10v.c (md_section_align): Likewise.
-	* config/tc-cr16.c (l_cons): Likewise.
-	* config/tc-bfin.c (md_section_align): Likewise.
-	* config/tc-arm.c (md_section_align): Likewise.
-	* config/tc-arc.c (md_section_align): Likewise.
-	* config/bfin-parse.y (expr_1): Likewise.
-
-2015-11-02  Nick Clifton  <nickc@redhat.com>
-
-	* config/rx-parse.y: Allow zero value for 5-bit displacements.
-
-2015-11-02  Nick Clifton  <nickc@redhat.com>
-
-	* config/tc-rx.c (parse_rx_section): Align parameter provides a
-	multiple of n argument, not a power of n argument.
-
-2015-10-29  Nick Clifton  <nickc@redhat.com>
-
-	* config/tc-aarch64.c (elf64_aarch64_target_format): Select the
-	cloudabi format if the TARGET_OS is cloudabi.
-
-2015-10-29  Thomas Preud'homme  <thomas.preudhomme@arm.com>
-
-	* config/tc-arm.c (insns): Guard cps by arm_ext_v6_notm instead of
-	arm_ext_v6_dsp.
-
-2015-10-28  Claudiu Zissulescu  <claziss@synopsys.com>
-
-	* config/tc-arc.c (tokenize_arguments): Avoid creating unused
-	symbols when parsing relocation types.
-	(md_apply_fix): Handle TLS relocations. Fix BFD_RELOC_ARC_32_PCREL
-	relocation.
-	(arc_check_reloc): Emit BFD_RELOC_ARC_32_PCREL relocation.
-
-2015-10-27  Jim Wilson  <jim.wilson@linaro.org>
-
-	* config/tc-arm.c (selected_cpu_name): Increase length of array to
-	accomodate "Samsung Exynos M1".
-	(arm_parse_cpu): Add assertion and length check to prevent
-	overfilling selected_cpu_name.
-
-2015-10-22  Nick Clifton  <nickc@redhat.com>
-
-	* config/tc-msp430.c (PUSH_1X_WORKAROUND): Delete.
-	(OPTION_SILICON_ERRATA): Define.
-	(OPTION_SILICON_WARN): Define.
-	(md_parse_opton): Handle silicon errata options.
-	(md_longopts): Add silicon errata options.
-	(ms_show_usage): Report silicon errata options.
-	(msp430_srcoperand): Handle silicon errata.
-	(msp430_operands): Likewise. Improve nop insertion.
-	(msp430_fix_adjustable): Update warning generation.
-	* doc/c-msp430.texi: Document silicon errata options.
-
-2015-10-22  H.J. Lu  <hongjiu.lu@intel.com>
-
-	* configure.ac: Properly check
-	--enable-compressed-debug-sections={yes,all}.
-	* configure: Regenerated.
-
-2015-10-22  H.J. Lu  <hongjiu.lu@intel.com>
-
-	PR gas/19109
-	* configure.ac: Handle --enable-compressed-debug-sections=*,gas,*.
-	* configure: Regenerated.
-
-2015-10-22  H.J. Lu  <hongjiu.lu@intel.com>
-
-	* config/tc-i386.c (tc_i386_fix_adjustable): Handle
-	BFD_RELOC_X86_64_GOTPCRELX and BFD_RELOC_X86_64_REX_GOTPCRELX.
-	(tc_gen_reloc): Likewise.
-	(i386_validate_fix): Generate BFD_RELOC_X86_64_GOTPCRELX or
-	BFD_RELOC_X86_64_REX_GOTPCRELX if fx_tcbit2 is set.
-	* config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Also return
-	true for BFD_RELOC_X86_64_GOTPCRELX and
-	BFD_RELOC_X86_64_REX_GOTPCRELX.
-
-2015-10-22  H.J. Lu  <hongjiu.lu@intel.com>
-
-	* config/tc-i386.c (tc_i386_fix_adjustable): Handle
-	BFD_RELOC_386_GOT32X.
-	(tc_gen_reloc): Likewise.
-	(match_template): Force 0x8b encoding for "mov foo@GOT, %eax".
-	(output_disp): Check for "call/jmp *mem", "mov mem, %reg",
-	"test %reg, mem" and "binop mem, %reg" where binop is one of
-	adc, add, and, cmp, or, sbb, sub, xor instructions.  Set
-	fx_tcbit if the REX prefix is generated.  Set fx_tcbit2 if
-	BFD_RELOC_386_GOT32X should be generated.
-	(i386_validate_fix): Generate BFD_RELOC_386_GOT32X if fx_tcbit2
-	is set.
-
-2015-10-21  Nick Clifton  <nickc@redhat.com>
-
-	PR gas/19109
-	* configure.ac: Restore --enable-compressed-debug-sections, with
-	options of all, none or gas.
-	Do not enable compressed debug sections by default for x86 Linux
-	targets.
-	* configure: Regenerate.
-
-2015-10-20  H.J. Lu  <hongjiu.lu@intel.com>
-
-	PR gas/19109
-	* NEWS: Update --enable-compressed-debug-sections=.
-	* configure.ac: Remove --enable-compressed-debug-sections.
-	(DEFAULT_FLAG_COMPRESS_DEBUG): Check
-	--enable-compressed-debug-sections={all,gas} instead of
-	--enable-compressed-debug-sections.  For x86 Linux targets,
-	default to compressing debug sections.
-	* configure: Regenerated.
-
-2015-10-19  Nick Clifton  <nickc@redhat.com>
-
-	PR gas/19109
-	* configure.ac: Add option --enable-compressed-debug-sections.
-	This sets the default behaviour for compressing debug sections.
-	* as.c (flag_compress_debug): Define and initialise to
-	COMPRESS_DEBUG_GABI_ZLIB if DEFAULT_COMPRESS_DEBUG is set.
-	(show_usage): Indicate whether --no-compress-debug-sections
-	or --compress-debug-sections is the default.
-	* config/tc-i386.c (flag_compress_debug): Delete definition.
-	* doc/as.texinfo (--nocompress-debug-sectionas): Update
-	description.
-	* NEWS: Announce the new feature.
-	* config.in: Regenerate.
-	* configure: Regenerate.
-
-2015-10-12  Nick Clifton  <nickc@redhat.com>
-
-	* config/tc-msp430.c (msp430_mcu_names): Rename to
-	msp430_mcu_data.  Add fields for the ISA and hardware multiply
-	support.  Update with information from the latest devices.csv
-	file.
-	(md_parse_option): Make use of the new array.
-
-2015-10-12  Andrew Burgess  <andrew.burgess@embecosm.com>
-
-	* config/tc-avr.c (avr_output_property_record): Fix overwrite bug
-	for align and fill records.
-	(avr_handle_align): Record fill information for align frags.
-	(create_record_for_frag): Add next frag assertion, use correct
-	address for align records.
-
-2015-10-10  Alan Modra  <amodra@gmail.com>
-
-	PR gas/19113
-	* read.c (next_char_of_string): Mask char after escape.  Use
-	CHAR_MASK rather than 0xff.
-
-2015-10-07  Yao Qi  <yao.qi@linaro.org>
-
-	* config/tc-aarch64.c (md_begin): Access field 'name' rather
-	than 'template'.
-
-2015-10-07  Claudiu Zissulescu  <claziss@synopsys.com>
-
-	* config/tc-arc.c: Revamped file for ARC support.
-	* config/tc-arc.h: Likewise.
-	* doc/as.texinfo: Add new ARC options.
-	* doc/c-arc.texi: Likewise.
-
-2015-10-02  Renlin Li <renlin.li@arm.com>
-
-	* config/tc-aarch64.c (s_tlsdescadd): New.
-	(s_tlsdescldr): New.
-	(md_pseudo_table): Handle tlsdescadd and tlsdescldr pseudo ops.
-	(reloc_table): Add entries for BFD_RELOC_AARCH64_TLSDESC_OFF_G0_NC and
-	BFD_RELOC_AARCH64_TLSDESC_OFF_G0_NC.
-	(process_movw_reloc_info): Support AARCH64_TLSDESC_OFF_G1 and
-	AARCH64_TLSDESC_OFF_G0_NC.
-	(md_apply_fix): Likewise.
-	(aarch64_force_relocation): Likewise.
-
-2015-10-02  Renlin Li <renlin.li@arm.com>
-
-	* config/tc-aarch64.c (reloc_table): Add two entries for
-	gottprel_g0_nc and gottprel_g1.
-	(process_movw_reloc_info): Add support.
-	(md_apply_fix): Likewise.
-	(aarch64_force_relocation): Likewise.
-
-2015-10-02  Renlin Li <renlin.li@arm.com>
-
-	* config/tc-aarch64.c (reloc_table): New relocation modifier tlsgd_g0_nc.
-	(process_movw_reloc_info): Support BFD_RELOC_AARCH64_TLSGD_MOVW_G1.
-	(md_apply_fix): Likewise.
-	(aarch64_force_relocation): Likewise.
-
-2015-10-02  Renlin Li <renlin.li@arm.com>
-
-	* config/tc-aarch64.c (reloc_table): New relocation modifier tlsgd_g1.
-	(process_movw_reloc_info): Support BFD_RELOC_AARCH64_TLSGD_MOVW_G1.
-	(md_apply_fix): Likewise.
-	(aarch64_force_relocation): Likewise.
-
-2015-10-02  Renlin Li <renlin.li@arm.com>
-
-	* config/tc-aarch64.c (reloc_table): New relocation modifier
-	gotoff_g0_nc.
-	(process_movw_reloc_info): Support gotoff_g0_nc.
-	(md_apply_fix): Likewise.
-
-2015-10-02  Renlin Li  <renlin.li@arm.com>
-
-	* config/tc-aarch64.c (reloc_table): New relocation modifier
-	gotoff_g1.
-	(process_movw_reloc_info): Support newly added modifier.
-	(md_apply_fix): Likewise.
-
-2015-09-29  Dominik Vogt  <vogt@linux.vnet.ibm.com>
-
-	* doc/c-s390.texi: Add documentation.
-	Add missing code markup.
-	* config/tc-s390.c (current_flags): New static variable.
-	(s390_parse_cpu): Parse cpu flags a la "+nohtm" etc.
-	(s390_setup_opcodes): Use cpu flags to determine the set of opcodes.
-	Fix indentation.
-	(md_parse_option): Call s390_parse_cpu with the new signature.
-	(s390_machine): Likewise.
-	Keep track of current_flags.
-	Simplify code a bit.
-	undefine MAX_HISTORY at end of function.
-	(s390_machinemode): undefine MAX_HISTORY at end of function.
-	Update an error message.
-
-2015-08-11  Peter Zotov  <whitequark@whitequark.org>
-
-	PR ld/18759
-	* config/tc-or1k.c (tc_gen_reloc): Correct computation of PC
-	relative relocs.
-	* config/tc-or1k.h (GAS_CGEN_PRCEL_R_TYPE): Delete.
-
-2015-09-25  Ryo ONODERA  <ryo_on@yk.rim.or.jp>
-
-	PR 18994
-	* configure.ac (nds32): Don't use bash == in tests.
-	* configure: Regenerate.
-
-2015-09-23  Nick Clifton  <nickc@redhat.com>
-
-	* config/tc-ppc.c (insn_validate): Cast PPC_OPSHIFT_INV to an int.
-
-2015-09-22  Nick Clifton  <nickc@redhat.com>
-
-	* config/tc-rx.c (nop_7): Recode using MAX.
-
-2015-09-05  Chen Gang  <gang.chen.5i5j@gmail.com>
-
-	* config/tc-avr.c (md_section_align): Append UL for -1 to avoid
-	the latest gcc's warning.
-
-2015-08-27  Alan Modra  <amodra@gmail.com>
-
-	PR gas/18581
-	* config/tc-aarch64.h (TC_START_LABEL): Redefine.
-	* config/tc-arm.c (tc_start_label_without_colon): Delete params.
-	Use input_line_pointer directly.
-	* config/tc-arm.h (TC_START_LABEL): Redefine.
-	(TC_START_LABEL_WITHOUT_COLON): Redefine.
-	(tc_start_label_without_colon): Update prototype.
-	* config/tc-bfin.c (bfin_start_label): Delete ptr param.  Check
-	for NUL instead.
-	* config/tc-bfin.h (bfin_start_label): Update prototype.
-	(TC_START_LABEL): Redefine.
-	* config/tc-d30v.h (TC_START_LABEL): Redefine.
-	* config/tc-fr30.c (restore_colon): Rewrite.
-	(fr30_is_colon_insn): Add nul_char param.  Return int.  Bump
-	i_l_p over quote.  Update restore_colon calls.
-	* config/tc-fr30.h (TC_START_LABEL): Redefine.
-	(fr30_is_colon_insn): Update prototype.
-	* config/tc-m32c.c (restore_colon, m32c_is_colon_insn): As above.
-	* config/tc-m32c.h (TC_START_LABEL): Redefine.
-	(m32c_is_colon_insn): Update prototype.
-	* config/tc-m32r.h (TC_START_LABEL): Redefine.
-	* config/tc-mep.h (TC_START_LABEL): Redefine.
-	* config/tc-nds32.h (TC_START_LABEL): Redefine.
-	* config/tc-tic54x.c (tic54x_start_label): Replace params with
-	nul_char and next_char.  Step over trailing quote.
-	* config/tc-tic54x.h (TC_START_LABEL_WITHOUT_COLON): Redefine.
-	(tic54x_start_label): Update prototype.
-	* read.c (TC_START_LABEL): Redefine.  Update invocation.
-	(TC_START_LABEL_WITHOUT_COLON): Update invocation.
-	* config/tc-nios2.c (s_nios2_set): Save initial input_line_pointer
-	and restore if calling s_set.  Don't restore delim again.
-
-2015-08-26  Alan Modra  <amodra@gmail.com>
-
-	PR gas/18581
-	* config/tc-mn10200.c (md_assemble <mdr>): Move restore_line_pointer
-	call to where input line used to be restored.
-	* config/tc-mn10300.c (md_assemble <usp>): Remove redundant input
-	line restore.
-	* config/tc-tilepro.c (parse_reg_expression): Add regname var.
-
-2015-08-26  Nick Clifton  <nickc@redhat.com>
-
-	PR gas/18842
-	* configure.ac (AS_CHECK_DECLS): Add asprintf.
-	* configure: Regenerate.
-	* config.in: Regenerate.
-
-2015-08-25  Jose E. Marchesi  <jose.marchesi@oracle.com>
-
-	* config/tc-sparc.c (priv_reg_table): New privileged register
-	%pmcdper.
-
-2015-08-21  Nick Clifton  <nickc@redhat.com>
-
-	PR gas/18581
-	* expr.c (get_symbol_end): Rename to get_symbol_name.  Add a
-	return parameter pointing to the start of the symbol.  Allow
-	symbol names enclosed in double quotes.
-	(restore_line_pointer): New function.  Replace the NUL character
-	inserted into the input stream with the given character.  If the
-	character was a double quote, advance the input pointer.
-	* expr.h (get_symbol_end): Delete.
-	(get_symbol_name): Add prototype.
-	(restore_line_pointer): Prototype.
-	* read.h (SKIP_WHITESPACE_AFTER_NAME): New macro.
-	* doc/as.texinfo (Symbol Intro): Document that symbol names can
-	now be enclosed in double quotes.
-	* cond.c (s_ifdef): Replace get_symbol_end with get_symbol_name.
-	Use restore_line_pointer to replace the NUL in the input stream.
-	Use SKIP_WHITESPACE_AFTER_NAME to skip past the end of a symbol.
-	Check for the use of double quoted symbol names.
-	* expr.c: Likewise.
-	* config/obj-aout.c: Likewise.
-	* config/obj-coff-seh.c: Likewise.
-	* config/obj-coff.c: Likewise.
-	* config/obj-elf.c: Likewise.
-	* config/obj-evax.c: Likewise.
-	* config/obj-macho.c: Likewise.
-	* config/obj-som.c: Likewise.
-	* config/tc-alpha.c: Likewise.
-	* config/tc-arc.c: Likewise.
-	* config/tc-arm.c: Likewise.
-	* config/tc-dlx.c: Likewise.
-	* config/tc-h8300.c: Likewise.
-	* config/tc-hppa.c: Likewise.
-	* config/tc-i370.c: Likewise.
-	* config/tc-i386-intel.c: Likewise.
-	* config/tc-i386.c: Likewise.
-	* config/tc-i960.c: Likewise.
-	* config/tc-ia64.c: Likewise.
-	* config/tc-iq2000.c: Likewise.
-	* config/tc-m32r.c: Likewise.
-	* config/tc-m68hc11.c: Likewise.
-	* config/tc-m68k.c: Likewise.
-	* config/tc-microblaze.c: Likewise.
-	* config/tc-mips.c: Likewise.
-	* config/tc-mmix.c: Likewise.
-	* config/tc-mn10200.c: Likewise.
-	* config/tc-mn10300.c: Likewise.
-	* config/tc-nios2.c: Likewise.
-	* config/tc-ppc.c: Likewise.
-	* config/tc-s390.c: Likewise.
-	* config/tc-score.c: Likewise.
-	* config/tc-score7.c: Likewise.
-	* config/tc-sparc.c: Likewise.
-	* config/tc-tic4x.c: Likewise.
-	* config/tc-tic54x.c: Likewise.
-	* config/tc-tic6x.c: Likewise.
-	* config/tc-tilegx.c: Likewise.
-	* config/tc-tilepro.c: Likewise.
-	* config/tc-v850.c: Likewise.
-	* config/tc-xtensa.c: Likewise.
-	* config/tc-z80.c: Likewise.
-	* dw2gencfi.c: Likewise.
-	* dwarf2dbgc.: Likewise.
-	* ecoff.c: Likewise.
-	* read.c: Likewise.
-	* stabs.c: Likewise.
-
-2015-08-19  Jiong Wang  <jiong.wang@arm.com>
-
-	* config/tc-aarch64.c (reloc_table): New relocation types support for
-	dtprel_lo12.
-	(ldst_lo12_determine_real_reloc_type): Support
-	BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12,
-	BFD_RELOC_AARCH64_TLSLD_LDST16_DTPREL_LO12_NC,
-	BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12,
-	BFD_RELOC_AARCH64_TLSLD_LDST32_DTPREL_LO12_NC,
-	BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12,
-	BFD_RELOC_AARCH64_TLSLD_LDST64_DTPREL_LO12_NC,
-	BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12,
-	BFD_RELOC_AARCH64_TLSLD_LDST8_DTPREL_LO12_NC.
-	(parse_operands): Likewise.
-	(md_apply_fix): Likewise.
-	(aarch64_force_relocation): Likewise.
-	(process_movw_reloc_info): Likewise.
-
-2015-08-19  Jiong Wang  <jiong.wang@arm.com>
-
-	* config/tc-aarch64.c (reloc_table): New relocation modifiers,
-	"dtprel_hi12", "dtprel_g0", "dtprel_g0_nc", "dtprel_g1",
-	"dtprel_g1_nc", "dtprel_g2".
-	(md_apply_fix): Support new relocation types.
-	(aarch64_force_relocation): Likewise.
-	(process_movw_reloc_info): Likewise.
-
-2015-08-19  Jiong Wang  <jiong.wang@arm.com>
-
-	* config/tc-aarch64.c (reloc_table): New relocation modifiers.
-	(md_apply_fix): Support BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12_NC.
-	(aarch64_force_relocation): Likewise.
-
-2015-08-17  Alan Modra  <amodra@gmail.com>
-
-	* config/tc-arm.c (s_align): Delete.
-	(md_pseudo_table): Use s_align_ptwo for "align".
-	* config/tc-arm.h (TC_ALIGN_ZERO_IS_DEFAULT): Define.
-	* read.c (s_align): Modify for TC_ALIGN_ZERO_IS_DEFAULT.
-
-2015-08-13  Alan Modra  <amodra@gmail.com>
-
-	* expr.c (operand): Rewrite handling of operands starting with "0f".
-	If atof_generic only parses "-" or "+", treat as expression.
-
-2015-08-13  Alan Modra  <amodra@gmail.com>
-	    DJ Delorie  <dj@redhat.com>
-
-	* expr.c (integer_constant): Return O_absent expression if eol.
-	(operand): For targets with both LOCAL_LABELS_FB and
-	NUMBERS_WITH_SUFFIX set, treat "0b" not followed by binary
-	digits as a local label reference.  Correct handling of 0b prefix.
-	If a suffix is not allowed, error on 0B.
-
-2015-08-13  Alan Modra  <amodra@gmail.com>
-
-	* doc/as.texinfo (Local Labels): Allowed range of N in local
-	labels is non-negative integers, not positive integers.
-
-2015-08-12  David Weatherford  <weath@cadence.com>
-
-	* config/tc-xtensa.c (struct litpool_frag, struct litpool_seg):
-	New structures.
-	(xtensa_maybe_create_literal_pool_frag): New function.
-	(litpool_seg_list, auto_litpools, auto_litpool_limit)
-	(litpool_buf, litpool_slotbuf): New static variables.
-	(option_auto_litpools, option_no_auto_litpools)
-	(option_auto_litpool_limit): New enum identifiers.
-	(md_longopts): Add entries for auto-litpools, no-auto-litpools
-	and auto-litpool-limit.
-	(md_parse_option): Handle option_auto_litpools,
-	option_no_auto_litpools and option_auto_litpool_limit.
-	(md_show_usage): Add help for --[no-]auto-litpools and
-	--auto-litpool-limit.
-	(xtensa_mark_literal_pool_location): Record a place for literal
-	pool with a call to xtensa_maybe_create_literal_pool_frag.
-	(get_literal_pool_location): Find highest priority literal pool
-	or convert candidate to literal pool when auto-litpools are used.
-	(xg_assemble_vliw_tokens): Create literal pool after jump
-	instruction.
-	(xtensa_check_frag_count): Create candidate literal pool every
-	auto_litpool_limit frags.
-	(xtensa_relax_frag): Add jump around literals to non-empty
-	literal pool.
-	(xtensa_move_literals): Estimate literal pool addresses and move
-	unreachable literals closer to their users, converting candidate
-	to literal pool if needed.
-	(xtensa_switch_to_non_abs_literal_fragment): Only emit error
-	about missing .literal_position in case auto-litpools are not
-	used.
-	* config/tc-xtensa.h (xtensa_relax_statesE): New relaxation
-	state: RELAX_LITERAL_POOL_CANDIDATE_BEGIN.
-	* doc/as.texinfo (Xtensa options):  Document --auto-litpools and
-	--no-auto-litpools options.
-	* doc/c-xtensa.texi (Xtensa options): Likewise.
-
-2015-08-12  Simon Dardis  <simon.dardis@imgtec.com>
-
-	* config/tc-mips.c (move_register): Change to use 'or' only.
-	(s_cpload, s_cpsetup, s_cprestore, s_cpreturn): Update to
-	use or for move.
-
-2015-08-11  Jiong Wang  <jiong.wang@arm.com>
-
-	* config/tc-aarch64.c (reloc_table): New relocation modifiers
-	"dtprel_lo12".
-	(md_apply_fix): Support BFD_RELOC_AARCH64_TLSLD_ADD_DTPREL_LO12.
-	(aarch64_force_relocation): Likewise.
-
-2015-08-11  Jiong Wang  <jiong.wang@arm.com>
-
-	* config/tc-aarch64.c (reloc_table): New relocation modifiers.
-	(md_apply_fix): Support BFD_RELOC_AARCH64_TLSLD_ADD_LO12_NC.
-	(aarch64_force_relocation): Likewise.
-
-2015-08-11  Jiong Wang  <jiong.wang@arm.com>
-
-	* config/tc-aarch64.c (reloc_table): New relocation modifiers.
-	(md_apply_fix): Support BFD_RELOC_AARCH64_TLSLD_ADR_PAGE21.
-	(aarch64_force_relocation): Likewise.
-
-2015-08-11  Nick Clifton  <nickc@redhat.com>
-
-	PR gas/18765
-	* config/tc-arm.c (move_or_literal_pool): Use U suffix to remove
-	compile time warnings about constant expressions being shifted
-	into bit 31.
-	(do_iwmmxt_wldstd): Likewise.
-	(do_iwmmxt_wrwrwr_or_imm5): Likewise.
-	(md_assemble): Likewise.
-
-	PR gas/18574
-	* config/tc-msp430.c (msp430_operands): Rewrite if statements to
-	remove redundant checks.
-	(md_apply_fix): Likewise.
-
-	PR gas/18677
-	* config/tc-mmix.c (md_assemble): Fix typo checking operands with
-	a numeric constant value.
-
-	PR gas/18678
-	* config/tc-tic4x.c (tic4x_insn_check): Fix typo.
-
-	PR gas/18679
-	* config/xtensa-relax.c (same_operand_name): Fix typo.
-
-2015-08-08  Hans-Peter Nilsson  <hp@axis.com>
-
-	* tc-arm.c (double_to_single, is_double_a_single): Append ULL to
-	0xFFFFFFFFFFFFF to avoid errors on 32-bit hosts.
-
-2015-08-04  Thomas Preud'homme  <thomas.preudhomme@arm.com>
-
-	* doc/c-aarch64.texi (.xword): Document directive.
-
-2015-08-03  Nick Clifton  <nickc@redhat.com>
-
-	* doc/as.texinfo (Overview): Add --hash-size to the synopsis and
-	fix typo in its entry: @kindex -> @item.
-
-2015-07-28  Robert Suchanek  <robert.suchanek@imgtec.com>
-
-	* config/tc-mips.c (mips_cpu_info_table): Add m5100 and m5101 entries.
-	* doc/c-mips.texi: Document m5100 and m5101 for -march=.
-
-2015-07-28  Robert Suchanek  <robert.suchanek@imgtec.com>
-
-	* config/tc-mips.c (mips_cpu_info_table): Add interaptiv entry.
-	* doc/c-mips.text: Document -march=interaptiv.
-
-2015-07-27  H.J. Lu  <hongjiu.lu@intel.com>
-
-	* configure: Regenerated.
-
-2015-07-24  Nick Clifton  <nickc@redhat.com>
-
-	* config/tc-rl78.c (rl78_abs_sym): New local variable.
-	(md_begin): Initialise the new symbol.
-	(OPIMM): Define the value to be relative to the new symbol and not
-	the absolute section symbol.
-
-2015-07-22  Alan Modra  <amodra@gmail.com>
-
-	PR gas/18687
-	* input-scrub.c (input_scrub_next_buffer): Rearrange and simplify
-	loop.  Don't drop lines at end of file lacking a newline, add a
-	newline instead.  Ensure partial_size is zero whenever
-	partial_where is NULL.  Adjust buffer size for extra char.
-	(input_scrub_push, input_scrub_begin): Adjust buffer size here too.
-
-2015-07-20  Matthew Wahab  <matthew.wahab@arm.com>
-
-	* NEWS: Mention corrected spelling of armv6kz.
-	* config/tc-arm.c (arm_cpus): Replace ARM_ARCH_V6ZK with
-	ARM_ARCH_V6KZ.
-	(arm_archs): Likewise. Also add "armv6kz" and "armv6kzt2".
-	* doc/c-arm.texi: Replace "armv6zk" with "armv6kz".
-
-2015-07-16  Jiong Wang  <jiong.wang@arm.com>
-
-	* config/tc-aarch64.c (reloc_table): New relocation modifiers.
-	(md_apply_fix): Support BFD_RELOC_AARCH64_TLSLD_ADR_PREL21.
-	(aarch64_force_relocation): Ditto.
-
-2015-07-16  Matthew Wahab  <matthew.wahab@arm.com>
-
-	* config/tc-arm.c (arm_fpus): Add crypto-neon-fp-armv8.1.
-	* doc/c-arm.texi (-mfpu=): Likewise.  Correct the entry for
-	neon-fp-armv8.1.
-
-2015-07-16  James Greenhalgh  <james.greenhalgh@arm.com>
-
-	* config/tc-arm.c (md_assemble): Rephrase the "selected processor does
-	not support ARM mode" error messages.
-
-2015-07-15  H.J. Lu  <hongjiu.lu@intel.com>
-
-	* config/tc-i386.c (flag_compress_debug): Replace
-	COMPRESS_DEBUG_GNU_ZLIB with COMPRESS_DEBUG_GABI_ZLIB.
-
-2015-07-14  H.J. Lu  <hongjiu.lu@intel.com>
-
-	* as.c (parse_args): Make --compress-debug-sections and
-	--compress-debug-sections=zlib the same as
-	--compress-debug-sections=zlib-gabi.
-	* doc/as.texinfo: Change --compress-debug-sections and
-	--compress-debug-sections=zlib to zlib-gabi.
-
-2015-07-09  Catherine Moore  <clm@codesourcery.com>
-
-	* config/tc-mips.c (check_fpabi):  Handle
-	VAL_GNU_MIPS_ABI_FP_NAN2008.
-
-2015-07-08  Ciro Santilli  <ciro.santilli@gmail.com>
-
-	* doc/as.texinfo: Clarify case requirements for pseudo ops.
-
-2015-07-08  Pitchumani Sivanupandi <pitchumani.s@atmel.com>
-
-	* config/tc-avr.c (tc_gen_reloc): Change 32 bit relocation to
-	32 bit PC relative and update offset if the fixup is pc-relative.
-	* config/tc-avr.h (DIFF_EXPR_OK): Define to enable PC relative diff
-	relocs.
-
-2015-07-03  Alan Modra  <amodra@gmail.com>
-
-	* config/tc-ppc.c (md_show_usage): Add -m821, -m850, -m860.
-	* doc/c-ppc.texi (PowerPC-Opts): Likewise.
-
-2015-07-01  Sandra Loosemore  <sandra@codesourcery.com>
-	    Cesar Philippidis  <cesar@codesourcery.com>
-
-	* config/tc-nios2.c (nios2_min_align): New.
-	(nop): Replace with....
-	(nop_r1, nop_r2, nop_r2_cdx, nop32, nop16): New.
-	(nios2_align): Handle alignment on 2-byte boundaries when CDX
-	instructions may be present.
-	(s_nios2_align): Adjust reference to nop.
-	(CDXBRANCH, IS_CDXBRANCH): New.
-	(CDX_UBRANCH_SUBTYPE, CDX_CBRANCH_SUBTYPE): New.
-	(nios2_relax_subtype_size): Handle 2-byte CDX branches.
-	(nios2_relax_frag): Likewise.
-	(md_convert_frag): Handle R2 encodings.
-	(nios2_check_overflow): Check that low-order bits are zero
-	before applying rightshift from howto.
-	(nios2_check_overflow): Correct negative overflow calculation.
-	(nios2_diagnose_overflow): Handle signed_immed12_overflow.  Issue
-	generic overflow messages for miscellaneous instruction formats.
-	(md_apply_fix): Recognize new R2 relocations.  For pc_relative
-	relocations, store fixup in *valP.
-	(nios2_reglist_mask, nios2_reglist_dir): New.
-	(nios2_parse_reglist): New.
-	(nios2_parse_base_register): New.
-	(nios2_assemble_expression): Handle constant expressions designated
-	by BFD_RELOC_NONE.
-	(nios2_assemble_reg3): New.
-	(nios2_assemble_arg_c): Handle R2 instruction formats.
-	(nios2_assemble_arg_d): Likewise.
-	(nios2_assemble_arg_s): Likewise.
-	(nios2_assemble_arg_t): Likewise.
-	(nios2_assemble_arg_D): New.
-	(nios2_assemble_arg_S): New.
-	(nios2_assemble_arg_T): New.
-	(nios2_assemble_arg_i): Handle R2 instruction formats.
-	(nios2_assemble_arg_I): New.
-	(nios2_assemble_arg_u): Handle R2 instruction formats.
-	(nios2_assemble_arg_U): New.
-	(nios2_assemble_arg_V): New.
-	(nios2_assemble_arg_W): New.
-	(nios2_assemble_arg_X): New.
-	(nios2_assemble_arg_Y): New.
-	(nios2_assemble_arg_o): Handle R2 instruction formats.
-	(nios2_assemble_arg_O): New.
-	(nios2_assemble_arg_P): New.
-	(nios2_assemble_arg_j): Handle R2 instruction formats.
-	(nios2_assemble_arg_k): New.
-	(nios2_assemble_arg_l): Handle R2 instruction formats.
-	(nios2_assemble_arg_m): Likewise.
-	(nios2_assemble_arg_M): New.
-	(nios2_assemble_arg_N): New.
-	(nios2_assemble_arg_e): New.
-	(nios2_assemble_arg_f): New.
-	(nios2_assemble_arg_g): New.
-	(nios2_assemble_arg_h): New.
-	(nios2_assemble_arg_R): New.
-	(nios2_assemble_arg_B): New.
-	(nios2_assemble_args): Handle new argument letters.
-	(nios2_consume_arg): Likewise.
-	(nios2_translate_pseudo_insn): Avoid dereferencing null pointer
-	in error message.
-	(nios2_ps_insn_info_structs): Add nop.n.
-	(output_ubranch): Handle CDX branches.
-	(output_cbranch): Likewise.
-	(output_call): Handle R2 encodings.
-	(output_movia): Likewise.
-	(md_begin): Initialize nios2_min_align.
-	(md_assemble): Align to nios2_min_align.  Adjust nios2_min_align
-	if a 16-bit instruction is seen.
-	(nios2_cons_align): Use appropriate nop pattern.
-
-2015-07-01  Sandra Loosemore  <sandra@codesourcery.com>
-	    Cesar Philippidis  <cesar@codesourcery.com>
-
-	* config/tc-nios2.c: Adjust includes.
-	(OPTION_MARCH): Define.
-	(md_longopts): Add -march option.
-	(nios2_architecture): New.
-	(nios2_use_arch): New.
-	(md_parse_option): Handle OPTION_MARCH.
-	(md_show_usage): Document -march.
-	(md_begin): Set arch in BFD.
-	(nios2_elf_final_processing): New.
-	* config/tc-nios2.h (elf_tc_final_processing): Define.
-	(nios2_elf_final_processing): New.
-	* doc/c-nios2.texi (-march): Add documentation.
-
-2015-06-30  Amit Pawar  <Amit.Pawar@amd.com>
-
-	* config/tc-i386.c (cpu_arch): Add .mwaitx.
-	(process_immext): Check operands for monitorx/mwaitx instructions.
-	* doc/c-i386.texi: Document mwaitx.
-
-2015-06-28  H.J. Lu  <hongjiu.lu@intel.com>
-
-	* as.c (parse_args): Replace COMPRESS_DEBUG_ZLIB with
-	COMPRESS_DEBUG_GNU_ZLIB.
-	* config/tc-i386.c (flag_compress_debug): Likewise.
-
-2015-06-24  H.J. Lu  <hongjiu.lu@intel.com>
-
-	* doc/as.texinfo (.cfi_lsda): Remove the extra @section.
-
-2015-06-19  Peter Bergner  <bergner@vnet.ibm.com>
-
-	* config/tc-ppc.c (md_assemble): Use ppc_optional_operand_value.
-	Allow for optional operands without insert functions.
-
-2015-06-18  Nick Clifton  <nickc@redhat.com>
-
-	PR gas/18541
-	* config/tc-arm.c (md_apply_fix): Add support for ADR in thumb
-	mode against a nearby symbol.
-
-2015-06-18  Nick Clifton  <nickc@redhat.com>
-
-	PR gas/18481
-	* config/tc-arm.c (tc_gen_reloc): Include BFD_RELOC_ARM_TLS_LE32
-	in the same case as BFD_RELOC_ARM_TLS_IS32.
-
-2015-06-17  Nick Clifton  <nickc@redhat.com>
-
-	* config/tc-arm.c (is_double_a_single): Make conditional upon the
-	availablity of a 64-bit type.  Use this type for the argument and
-	mantissa.
-	(double_to_single): Likewise.
-	* config/tc-arm.c (move_or_literal_pool): Use a 64-bit type for
-	the constant value, if available.  Generate a 64-bit value from a
-	bignum if supported.  Only perform the second optimization for
-	PR 18500 if the 64-bit type is available.
-
-2015-06-17  Alessandro Marzocchi  <alessandro.marzocchi@gmail.com>
-
-	PR gas/18500
-	* config/tc-arm.c (is_double_a_single): New function.
-	(double_to_single): New function.
-	(move_or_literal_pool): Add support for converting VLDR to VMOV.
-
-	PR gas/18499
-	* config/tc-arm.c (move_or_literal_pool): Add support for LDR Rx,=
-	to MOV.w or MVN.w for Thumb2.
-
-2015-06-17  Nicolas Pitre <nico@linaro.org>
-
-	* as.c (show_usage): Document --sectname-subst.
-	(parse_args): Add --sectname-subst.
-	* as.h (flag_sectname_subst): New.
-	* config/obj-elf.c (obj_elf_section_name): Add %S substitution.
-	* doc/as.texinfo: Document it.
-
-2015-06-15  Renlin Li  <renlin.li@arm.com>
-
-	* config/tc-aarch64.c (reloc_table): New relocation modifier.
-	(md_apply_fix): Support BFD_RELOC_AARCH64_LD64_GOTOFF_LO15.
-	(aarch64_force_relocation): Ditto
-
-2015-06-13  Mark Wielaard  <mjw@redhat.com>
-
-	* dwarf2dbg.c (out_header): Document EXPR->X_add_number value,
-	out_debug_aranges depends on it.
-	(out_debug_aranges): Track size of header to properly pad header
-	for address alignment.
-
-2015-06-11  John David Anglin  <danglin@gcc.gnu.org>
-
-	PR gas/18427
-	* config/tc-hppa.c (last_label_symbol): Declare.
-	(pa_get_label): Return last label in current space/segment or NULL.
-	(pa_define_label): Record last label and add to root.
-	(pa_undefine_label): Remove last label from root.
-
-2015-06-08  Nick Clifton  <nickc@redhat.com>
-
-	* config/tc-rx.c (rx_op): Correct handling of integer bignums.
-
-2015-06-04  Matthew Wahab  <matthew.wahab@arm.com>
-
-	* NEWS: Mention ARMv8.1 support in the Aarch64 port.
-	* config/tc-aarch64.c (aarch64_arch_option_table): Add "armv8.1-a".
-	* doc/c-aarch64.texi (-march): Add "armv8.1-a".
-
-2015-06-04  Renlin Li  <renlin.li@arm.com>
-
-	* config/tc-arm.c (arm_init_frag): Use frag's thumb_mode information
-	when available.
-
-2015-06-04  Nick Clifton  <nickc@redhat.com>
-
-	* config/tc-h8300.c (md_section_align): Fix compile time warning
-	about left shifting a negative value.
-
-2015-06-03  Matthew Wahab  <matthew.wahab@arm.com>
-
-	* config/tc-arm.c (arm_archs): Add "armv8.1-a".
-	* doc/c-arm.texi (ARM Options, -march): Add "armv8.1-a".
-	* NEWS: Mention ARMv8.1 support.
-
-2015-06-02  Matthew Wahab  <matthew.wahab@arm.com>
-
-	* config/tc-arm.c (arm_ext_pan): New.
-	(do_setpan): New, encode an ARM SETPAN instruction.
-	(do_t_setpan): New, encode a Thumb SETPAN instruction.
-	(insns): Add "setpan".
-	(arm_extensions): Add "pan".
-	* doc/c-arm.texi (ARM Options): Add "pan" to list of -mcpu processor
-	extensions.
-
-2015-06-02  Matthew Wahab  <matthew.wahab@arm.com>
-
-	* config/tc-aarch64.c (aarch64_features): Add "rdma".
-	* doc/c-aarch64.texi (AArch64 Extensions): Add "rdma".
-
-2015-06-02  Matthew Wahab  <matthew.wahab@arm.com>
-
-	* config/tc-aarch64.c (aarch64_features): Add "lor".
-	* doc/c-aarch64.c (Aarch64 Extensions): Add "lor" to list of
-	architecture extensions.
-
-2015-06-01  Matthew Wahab  <matthew.wahab@arm.com>
-
-	* config/tc-aarch64.c (parse_sys_reg): New parameter.  Check target
-	support.  Fix whitespace.
-	(parse_operands): Update for parse_sys_reg changes.
-	(aarch64_features): Add "pan".
-	* doc/c-aarch64.texi (Aarch64 Extensions): Add "pan".
-
-2015-06-01  Jiong Wang  <jiong.wang@arm.com>
-
-	* config/tc-aarch64.c (reloc_table): New relocation modifiers.
-	(md_apply_fix): Support BFD_RELOC_AARCH64_LD32_GOTPAGE_LO14.
-	(aarch64_force_relocation): Ditto.
-
-2015-06-01  Jiong Wang  <jiong.wang@arm.com>
-
-	* config/tc-aarch64.c (reloc_table): New relocation modifiers.
-	(md_apply_fix): Support BFD_RELOC_AARCH64_LD64_GOTPAGE_LO15.
-	(aarch64_force_relocation): Ditto.
-
-2015-05-28  Catherine Moore  <clm@codesourcery.com>
-	    Bernd Schmidt <bernds@codesourcery.com>
-	    Paul Brook <paul@codesourcery.com>
-
-	* config/tc-alpha.c (all_cfi_sections): Declare.
-	(s_alpha_ent): Initialize all_cfi_sections.
-	(alpha_elf_md_end): Invoke cfi_set_sections.
-	* config/tc-mips.c (md_apply_fix):  Handle BFD_RELOC_NONE.
-	(s_ehword): Use BFD_RELOC_32_PCREL.
-	(mips_fix_adjustable): Handle BFD_RELOC_32_PCREL.
-	(mips_cfi_reloc_for_encoding): New function.
-	* tc-mips.h (DWARF2_FDE_RELOC_SIZE): Redefine.
-	(DWARF2_FDE_RELOC_ENCODING): Define.
-	(tc_cfi_reloc_for_encoding): Define.
-	(mips_cfi_reloc_for_encoding): Define.
-	(tc_compact_eh_opcode_stop): Define.
-	(tc_compact_eh_opcode_pad): Define.
-	* doc/as.texinfo: Document Compact EH extensions.
-	* doc/internals.texi: Likewise.
-	* dw2gencfi.c (EH_FRAME_LINKONCE): Redefine.
-	(tc_cfi_reloc_for_encoding): Provide default.
-	(compact_eh): Declare.
-	(emit_expr_encoded): New function.
-	(get_debugseg_name): Add Compact EH support.
-	(alloc_debugseg_item): Likewise.
-	(cfi_set_sections): New function.
-	(dot_cfi_fde_data): New function.
-	(dot_cfi_personality_id): New function.
-	(dot_cfi_inline_lsda): New function.
-	(cfi_pseudo_table): Add cfi_fde_data, cfi_personality_id,
-	and cfi_inline_lsda.
-	(dot_cfi_personality): Add Compact EH support.
-	(dot_cfi_lsda): Likewise.
-	(dot_cfi_sections): Likewise.
-	(dot_cfi_startproc): Likewise.
-	(get_cfi_seg): Likewise.
-	(output_compact_unwind_data): New function.
-	(output_cfi_insn): Add Compact EH support.
-	(output_cie): Likewise.
-	(output_fde): Likewise.
-	(cfi_finish): Likewise.
-	(cfi_emit_eh_header): New function.
-	(output_eh_header): New function.
-	* dw2gencfi.h (cfi_set_sections): Declare.
-	(SUPPORT_COMPACT_EH): Define.
-	(MULTIPLE_FRAME_SECTIONS): Define.
-	New enumeration to describe the Compact EH header format.
-	(fde_entry): Add new fields personality_id, eh_header_type, eh_data_size,
-	eh_data, eh_loc and sections.
-	(CFI_EMIT_eh_frame, CFI_EMIT_debug_frame, CFI_EMIT_target,
-	CFI_EMIT_eh_frame_compact): Define.
-
-2015-05-26  Max Filippov  <jcmvbkbc@gmail.com>
-
-	* config/tc-xtensa.c (xtensa_move_literals): Check that
-	search_frag is non-NULL. Report error if literal frag is not
-	found.
-
-2015-05-22  Nick Clifton  <nickc@redhat.com>
-
-	PR gas/18446
-	* read.c (output_big_sleb128): Use U suffix to prevent compile
-	time warning.
-
-2015-05-19  Jiong Wang  <jiong.wang@arm.com>
-
-	* config/tc-aarch64.c (process_movw_reloc_info): Sort relocation case
-	labels alphabetically.
-	(md_apply_fix): Ditto.
-	(aarch64_force_relocation): Ditto.
-
-2015-05-15  H.J. Lu  <hongjiu.lu@intel.com>
-
-	PR binutis/18386
-	* config/tc-i386.c (OPTION_MAMD64): New.
-	(OPTION_MINTEL64): Likewise.
-	(md_longopts): Add -mamd64 and -mintel64.
-	(md_parse_option): Handle OPTION_MAMD64 and OPTION_MINTEL64.
-	(md_show_usage): Add -mamd64 and -mintel64.
-	* doc/c-i386.texi: Document -mamd64 and -mintel64.
-
-2015-05-15  H.J. Lu  <hongjiu.lu@intel.com>
-
-	* config/tc-i386.c (shared): New.
-	(OPTION_MSHARED): Likewise.
-	(elf_symbol_resolved_in_segment_p): Add relocation argument.
-	Check PLT relocations and shared.
-	(md_estimate_size_before_relax): Pass fragP->fr_var to
-	elf_symbol_resolved_in_segment_p.
-	(md_longopts): Add -mshared.
-	(md_show_usage): Likewise.
-	(md_parse_option): Handle OPTION_MSHARED.
-	* doc/c-i386.texi: Document -mshared.
-
-2015-05-14  H.J. Lu  <hongjiu.lu@intel.com>
-
-	* write.c (compress_debug): Don't write the zlib header, which
-	is handled by bfd_update_compression_header.
-
-2015-05-13  Max Filippov  <jcmvbkbc@gmail.com>
-
-	* config/tc-xtensa.c (xtensa_relax_frag): Allow trampoline to be
-	closer than J_RANGE / 2 to jump frag.
-
-2015-05-11  H.J. Lu  <hongjiu.lu@intel.com>
-
-	* configure.tgt (arch): Set to iamcu for i386-*-elfiamcu target.
-	* config/tc-i386.c (i386_mach): Support iamcu.
-	(i386_target_format): Likewise.
-
-2015-05-11  H.J. Lu  <hongjiu.lu@intel.com>
-
-	* config/tc-i386.c (cpu_arch): Add iamcu.
-	(i386_align_code): Handle PROCESSOR_IAMCU.
-	(i386_arch): Likewise.
-	(i386_mach): Likewise.
-	(i386_target_format): Likewise.
-	(valid_iamcu_cpu_flags): New function.
-	(check_cpu_arch_compatible): Only allow Intel MCU instructions
-	when targeting Intel MCU.
-	(set_cpu_arch): Call valid_iamcu_cpu_flags to check if CPU flags
-	are valid for Intel MCU.
-	(md_parse_option): Likewise.
-	* tc-i386.h (ELF_TARGET_IAMCU_FORMAT): New.
-	(processor_type): Add PROCESSOR_IAMCU.
-	* doc/c-i386.texi: Document iamcu.
-
-2015-05-08  Nick Clifton  <nickc@redhat.com>
-
-	PR gas/18347
-	* config/tc-arm.h (TC_EQUAL_IN_INSN): Define.
-	* config/tc-arm.c (arm_tc_equal_in_insn): New function.  Move
-	the symbol name checking code to here from...
-	(md_undefined_symbo): ... here.
-
-2015-05-07  H.J. Lu  <hongjiu.lu@intel.com>
-
-	* config/tc-i386.c (elf_symbol_resolved_in_segment_p): New.
-	(md_estimate_size_before_relax): Use it.
-
-2015-05-06  Jose E. Marchesi  <jose.marchesi@oracle.com>
-
-	* config/tc-sparc.c: Typo in comment fixed.
-
-2015-05-06  Jose E. Marchesi  <jose.marchesi@oracle.com>
-
-	* config/tc-sparc.c (sparc_ip): Support the %ncc "natural"
-	condition codes
-	* doc/c-sparc.texi (Sparc-Regs): Document %ncc.
-
-2015-05-06  Nick Clifton  <nickc@redhat.com>
-
-	* doc/as.texinfo (Dollar Local Labels): Note that these are only
-	supported on some targets.
-
-2015-05-06  Renlin Li  <renlin.li@arm.com>
-
-	* config/tc-aarch64.c (mapping_state): Recording alignment before exit.
-
-2015-05-05  Renlin Li  <renlin.li@arm.com>
-
-	* config/tc-aarch64.c (aarch64_init_frag): Always generate mapping
-	symbols.
-
-2015-05-05  Nick Clifton  <nickc@redhat.com>
-
-	* config/tc-msp430.c (MAX_OP_LEN): Increase to 4096.
-	(msp430_make_init_symbols): New function.
-	(msp430_section): Call it.
-	(msp430_frob_section): Likewise.
-
-2015-05-02  Max Filippov  <jcmvbkbc@gmail.com>
-
-	* config/tc-xtensa.c (cached_fixupS, fixup_cacheS): New typedefs.
-	(struct cached_fixup, struct fixup_cache): New structures.
-	(fixup_order, xtensa_make_cached_fixup),
-	(xtensa_realloc_fixup_cache, xtensa_cache_relaxable_fixups),
-	(xtensa_find_first_cached_fixup, xtensa_delete_cached_fixup),
-	(xtensa_add_cached_fixup): New functions.
-	(xtensa_relax_frag): Cache fixups pointing at potentially
-	oversized jumps at the beginning of every relaxation pass. Only
-	check subset of this cache in the reach of single jump from the
-	trampoline frag currently being relaxed.
-
-2015-05-01  Nick Clifton  <nickc@redhat.com>
-
-	* config/rl78-parse.y (MULU): Remove ISA_G14.
-	(MULH, DIVHU, DIVWU, MACHI, MACH): Update error strings.
-
-2015-05-01  H.J. Lu  <hongjiu.lu@intel.com>
-
-	* config/tc-i386.c (i386_elf_emit_arch_note): Removed.
-	* config/tc-i386.h (md_end): Likewise.
-	(i386_elf_emit_arch_note): Likewise.
-
-2015-05-01  H.J. Lu  <hongjiu.lu@intel.com>
-
-	* configure.tgt: Support i386-*-elf*.
-
-2015-04-30  DJ Delorie  <dj@redhat.com>
-
-	* config/rl78-defs.h (rl78_isa_g10): New.
-	(rl78_isa_g13): New.
-	(rl78_isa_g14): New.
-	* config/rl78-parse.y (ISA_G10): New.
-	(ISA_G13): New.
-	(ISA_G14): New.
-	(MULHU, MULH, MULU, DIVHU, DIVWU, MACHU, MACH): Use them.
-	* config/tc-rl78.c (rl78_isa_g10): New.
-	(rl78_isa_g13): New.
-	(rl78_isa_g14): New.
-
-2015-04-30  H.J. Lu  <hongjiu.lu@intel.com>
-
-	* config/tc-i386.c (i386_target_format): Use "else if" on
-	cpu_arch_isa.
-
-2015-04-30  Nick Clifton  <nickc@redhat.com>
-
-	PR gas/18347
-	* config/tc-arm.c (md_undefined_symbol): Issue a warning message
-	(if enabled) when the user creates a symbol with the same name as
-	an ARM instruction.
-	(flag_warn_syms): New static variable.
-	(arm_opts): Add mwarn-syms and mno-warn-syms.
-	* doc/c-arm.texi (ARM Options): Document the -m[no-]warn-syms
-	options.
-
-	PR gas/18353
-	* doc/as.texinfo (Zero): Add documentation of the .zero pseudo-op.
-
-2015-04-29  Nick Clifton  <nickc@redhat.com>
-
-	PR 18256
-	* config/tc-arm.c (encode_arm_cp_address): Issue an error message
-	if the operand is neither a register nor a vector.
-
-2015-04-29  Nick Clifton  <nickc@redhat.com>
-
-	* doc/as.texinfo (Set): Note that a symbol cannot be set multiple
-	times if the expression is not constant and the target uses linker
-	relaxation.
-
-2015-04-28  Renlin Li  <renlin.li@arm.com>
-
-	* config/tc-arm.c (arm_init_frag): Always emit mapping symbols.
-
-2015-04-28  Nick Clifton  <nickc@redhat.com>
-
-	PR 18313
-	* cond.c (s_if): Stop compile time warning about stopc being used
-	before it is set.
-	(s_ifc): Likewise.
-
-2015-04-27  Renlin Li  <renlin.li@arm.com>
-
-	* config/tc-aarch64.c (s_aarch64_inst): Don't align code for non-text
-	section.
-	(md_assemble): Likewise, move the align code outside the loop.
-
-2015-04-24  Jim Wilson  <jim.wilson@linaro.org>
-
-	* config/tc-aarch64.c (aarch64_cpus): Add CRC and CRYPTO features
-	for thunderx.
-
-2015-04-24  Richard Earnshaw  <rearnsha@arm.com>
-
-	* config/tc-arm.h (arm_min): New function.
-	(SUB_SEGMENT_ALIGN): Define.
-
-2015-04-23  Matthew Fortune  <matthew.fortune@imgtec.com>
-
-	* config/tc-mips.c (macro): State the recommended way of creating
-	32-bit or 64-bit addresses.
-
-2015-04-23  Jan Beulich  <jbeulich@suse.com>
-
-	* config/tc-i386.c (match_mem_size): Also allow no size
-	specification when broadcasting.
-
-2015-04-20  H.J. Lu  <hongjiu.lu@intel.com>
-
-	* doc/as.texinfo (Bundle directives): Shorten menu entry and
-	use @subsection.
-	(CFI directives): Use @subsection.
-	(SH-Dependent, SH64-Dependent): Moved after SCORE-Dependent.
-	* doc/c-i386.texi (i386-Mnemonics): Use @subsection.
-
-2015-04-17  Senthil Kumar Selvaraj  <senthil_kumar.selvaraj@atmel.com>
-
-	* config/tc-avr.c (create_record_for_frag): Rename link to
-	prop_rec_link.
-
-2015-04-15  H.J. Lu  <hongjiu.lu@intel.com>
-
-	* NEWS: Mention
-	--compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi].
-
-2015-04-14  H.J. Lu  <hongjiu.lu@intel.com>
-
-	* as.h (compressed_debug_section_type): Removed.
-
-2015-04-14  Nick Clifton  <nickc@redhat.com>
-
-	* config/tc-rl78.h (TC_LINKRELAX_FIXUP): Define.
-	(TC_FORCE_RELOCATION_SUB_SAME): Define.
-	(DWARF2_USE_FIXED_ADVANCE_PC): Define.
-
-2015-04-10  Nick Clifton  <nickc@redhat.com>
-
-	PR binutils/18198
-	* doc/c-arm.texi (ARM Options): Add a note about the interaction of
-	the -EB option with the linker's --be8 option.
-
-2015-04-09  Hans-Peter Nilsson  <hp@axis.com>
-
-	* doc/c-rx.texi: Fix markup typos in last change.
-
-2015-04-09  Nick Clifton  <nickc@redhat.com>
-
-	* config/tc-rx.c (enum options): Add OPTION_DISALLOW_STRING_INSNS.
-	(md_longopts): Add -mno-allow-string-insns.
-	(md_parse_option): Handle -mno-allow-string-insns.
-	(md_show_usage): Mention -mno-allow-string-insns.
-	(rx_note_string_insn_use): New function.  Produces an error
-	message if a string insn is used when it is not allowed.
-	* config/rx-parse.y (SCMPU): Call rx_note_string_insn_use.
-	(SMOVU, SMOVB, SMOVF, SUNTIL, SWHILE, RMPA): Likewise.
-	* config/rx-defs.h (rx_note_string_insn_use): Prototype.
-	* doc/c-rx.texi: Document -mno-allow-string-insns.
-
-2015-04-08  H.J. Lu  <hongjiu.lu@intel.com>
-
-	* as.c (show_usage): Update --compress-debug-sections.
-	(std_longopts): Use optional_argument on compress-debug-sections.
-	(parse_args): Handle
-	--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
-	* as.h (compressed_debug_section_type): New.
-	(flag_compress_debug): Change type to compressed_debug_section_type.
-	--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
-	* write.c (compress_debug): Set BFD_COMPRESS_GABI for
-	--compress-debug-sections=zlib-gabi.  Call
-	bfd_get_compression_header_size to get compression header size.
-	Don't rename section name for --compress-debug-sections=zlib-gabi.
-	* config/tc-i386.c (compressed_debug_section_type): Set to
-	COMPRESS_DEBUG_ZLIB.
-	* doc/as.texinfo: Document
-	--compress-debug-sections={none|zlib|zlib-gnu|zlib-gabi}.
-
-2015-04-07  Renlin Li  <renlin.li@arm.com>
-
-	* config/tc-aarch64.c (mapping_state): Use subseg_text_p.
-	(s_aarch64_inst): Likewise.
-	(md_assemble): Likewise.
-
-2015-04-06  H.J. Lu  <hongjiu.lu@intel.com>
-
-	* write.c (compress_debug): Use bfd_putb64 to write uncompressed
-	section size.
-
-2015-04-05  H.J. Lu  <hongjiu.lu@intel.com>
-
-	* write.c (compress_debug): Don't write the zlib header if
-	compressed section size is the same as before compression.
-
-2015-04-02  Nick Clifton  <nickc@redhat.com>
-
-	PR gas/18189
-	* config/tc-microblaze.c (parse_imm): Use offsetT as the type for
-	min and max parameters.  Sign extend values before testing.
-
-2015-04-02  Renlin Li  <renlin.li@arm.com>
-
-	* config/tc-aarch64.c (mapping_state): Emit MAP_DATA within text section in order.
-	(mapping_state_2): Don't emit MAP_DATA here.
-	(s_aarch64_inst): Align frag during state transition.
-	(md_assemble): Likewise.
-
-2015-04-02  Ed Maste  <emaste@freebsd.org>
-
-	* config/tc-aarch64.c (set_error_kind): Delete.
-	(set_error_message): Delete.
-
-2015-04-02  H.J. Lu  <hongjiu.lu@intel.com>
-
-	* configure: Regenerated.
-
-2015-04-01  Evandro Menezes  <e.menezes@samsung.com>
-
-	* config/tc-aarch64.c: Add support for Samsung Exynos M1.
-	* doc/c-aarch64.texi (-mcpu=): Add "exynos-m1".
-
-2015-04-01  Evandro Menezes  <e.menezes@samsung.com>
-
-	* config/tc-arm.c: Add support for Samsung Exynos M1.
-	* doc/c-arm.texi (-mcpu=): Add "exynos-m1".
-
-2015-04-01  H.J. Lu  <hongjiu.lu@intel.com>
-
-	* configure: Regenerated.
-
-2015-03-31  Ed Schouten  <ed@nuxi.nl>
-
-	* configure.tgt (fmt): Set to elf for *-*-cloudabi*.
-
-2015-03-31  H.J. Lu  <hongjiu.lu@intel.com>
-
-	* configure.ac: Revert the AM_ZLIB change.
-	* Makefile.in: Regenerated.
-	* aclocal.m4: Likewise.
-	* configure: Likewise.
-
-2015-03-31  H.J. Lu  <hongjiu.lu@intel.com>
-
-	* Makefile.am (ZLIBINC): New.
-	(AM_CFLAGS): Add $(ZLIBINC).
-	* as.c: (show_usage): Don't check HAVE_ZLIB_H.
-	(parse_args): Likewise.
-	* compress-debug.c: Don't check HAVE_ZLIB_H to include <zlib.h>.
-	(compress_init): Don't check HAVE_ZLIB_H.
-	(compress_data): Likewise.
-	(compress_finish): Likewise.
-	* configure.ac (AM_ZLIB): Removed.
-	(zlibinc): New.  AC_SUBST.
-	Add --with-system-zlib.
-	* Makefile.in: Regenerated.
-	* config.in: Likewise.
-	* configure: Likewise.
-	* doc/Makefile.in: Likewise.
-
-2015-03-27  H.J. Lu  <hongjiu.lu@intel.com>
-
-	* config/tc-i386.c (cpu_flags_set): Removed.
-
-2015-03-25  Renlin Li  <renlin.li@arm.com>
-
-	* config/tc-aarch64.c (mapping_state): Remove first MAP_DATA emitting
-	code.
-	(mapping_state_2): Emit first MAP_DATA symbol here.
-
-2015-03-24  H.J. Lu  <hongjiu.lu@intel.com>
-
-	PR gas/18087
-	* write.c (compress_debug): Don't write the zlib header if
-	compression didn't make the section smaller.
-
-2015-03-24  Terry Guo  <terry.guo@arm.com>
-
-	* config/tc-arm.c (no_cpu_selected): Use new macro to compare
-	features.
-	(parse_psr): Likewise.
-	(do_t_mrs): Likewise.
-	(do_t_msr): Likewise.
-	(static const arm_feature_set arm_ext_*): Defined with new macros.
-	(static const arm_feature_set arm_cext_*): Likewise.
-	(static const arm_feature_set fpu_fpa_ext_*): Likewise.
-	(static const arm_feature_set fpu_vfp_ext_*): Likewise.
-	(deprecated_coproc_regs): Likewise.
-	(UL_BARRIER): Likewise.
-	(barrier_opt_names): Likewise.
-	(arm_cpus): Likewise.
-	(arm_extensions): Likewise.
-
-2015-03-20  H.J. Lu  <hongjiu.lu@intel.com>
-
-	* config/tc-i386.c (i386_align_code): Limit multi-byte nop
-	instructions to 10 bytes.
-
-2015-03-19  Nick Clifton  <nickc@redhat.com>
-
-	* config/tc-rl78.c (enum options): Add G13 and G14.
-	(md_longopts): Add -mg13 and -mg14.
-	(md_parse_option): Handle -mg13 and -mg14.
-	(md_show_usage): List -mg13 and -mg14.
-	* doc/c-rl78.texi: Add description of -mg13 and -mg14 options.
-
-2015-03-18  Jon Turney  <jon.turney@dronecode.org.uk>
-	    Nick Clifton  <nickc@redhat.com>
-
-	PR binutils/18087
-	* doc/as.texinfo: Note that when gas compresses debug sections the
-	compression is only performed if it makes the section smaller.
-	* write.c (compress_debug): Do not compress a debug section if
-	doing so would make it larger.
-
-2015-03-17  Ganesh Gopalasubramanian  <Ganesh.Gopalasubramanian@amd.com>
-
-	* config/tc-i386.c (cpu_arch): Add PROCESSOR_ZNVER flags.
-	(i386_align_code): Add PROCESSOR_ZNVER cases.
-	* config/tc-i386.h (processor_type): Add PROCESSOR_ZNVER.
-	* doc/c-i386.texi: Add znver1 and clzero.
-
-2015-03-16  Nick Clifton  <nickc@redhat.com>
-
-	* dwarf2dbg.c (out_header): Remove spurious #if 1.
-
-2015-03-13  Jiong Wang  <jiong.wang@arm.com>
-
-	* config/tc-aarch64.c (warn_unpredictable_ldst): Don't warn on reg
-	number 31.
-
-2015-03-13  Jiong Wang  <jiong.wang@arm.com>
-
-	* config/tc-aarch64.h (SUB_SEGMENT_ALIGN): Define to be zero.
-
-2015-03-12  Andrew Bennett  <andrew.bennett@imgtec.com>
-
-	* config/tc-mips.c (mips_cpu_info_table): Add i6400 entry.
-	* doc/c-mips.texi: Document i6400 -march option.
-
-2015-03-12  Nick Clifton  <nickc@redhat.com>
-
-	PR gas/17444
-	* config/tc-arm.h (MD_APPLY_SYM_VALUE): Pass the current segment
-	to arm_apply_sym_value.  Update prototype.
-	* config/tc-arm.c (arm_apply_sym_value): Add segment argument.
-	Do not apply the value if the symbol is in a different segment to
-	the current segment.
-
-2015-03-11  Alan Modra  <amodra@gmail.com>
-
-	* config/tc-ppc.c (md_assemble): Don't abort on 8 byte insn fixups.
-	(md_apply_fix): Report an error on data-only fixups used with insns.
-
-2015-03-10  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>
-
-	* config/tc-s390.c (md_gather_operands): Check for valid
-	length field operands.
-
-2015-03-10  Michael Perkins  <perkinsmg75@yahoo.co.uk>
-
-	* config/tc-arm.c (parse_operands): Fix bug setting writeback
-	values for '^' on OP_REGLSTs.
-	(do_push_pop): Add new writeback constraint.
-
-2015-03-10  Renlin Li  <renlin.li@arm.com>
-
-	* config/tc-arm.c (mapping_state): Remove first MAP_DATA emitting code.
-	(mapping_state_2): Emit first MAP_DATA symbol here.
-
-2015-03-10  Matthew Wahab  <matthew.wahab@arm.com>
-
-	* config/tc-aarch64.c (mapping_state): Set minimum alignment for
-	code sections.
-
-2015-03-10  Nick Clifton  <nickc@redhat.com>
-
-	PR gas/17852
-	* config/tc-arm.c (md_begin): Ensure that selected_cpu is
-	initialised when CPU_DEFAULT is defined.
-
-2015-03-05  Nick Clifton  <nickc@redhat.com>
-
-	* config/tc-v850.c (md_parse_option): Fix code to set or clear
-	EF_RH850_DATA_ALIGN8 bit in ELF header, based upon the use of the
-	-m8byte-align and -m4byte-align command line options.
-
-2015-03-04  Richard Sandiford  <richard.sandiford@arm.com>
-
-	PR gas/17843
-	* config/tc-aarch64.c (process_movw_reloc_info): Allow
-	R_AARCH64_TLSLE_MOVW_TPREL_G0_NC and R_AARCH64_TLSLE_MOVW_TPREL_G1_NC
-	for MOVK.
-
-2015-02-28  Alan Modra  <amodra@gmail.com>
-
-	* write.c (SUB_SEGMENT_ALIGN): Don't pad non-code sections at
-	end to their alignment.
-
-2015-02-19  Marcus Shawcroft  <marcus.shawcroft@arm.com>
-
-	* config/tc-aarch64.c (reloc_table_entry): Generate
-	BFD_RELOC_AARCH64_TLSDESC_ADR_PREL21.
-	(md_apply_fix, aarch64_force_relocation): Handle
-	BFD_RELOC_AARCH64_TLSGD_ADR_PREL21.
-
-2015-02-19  Marcus Shawcroft  <marcus.shawcroft@arm.com>
-
-	* config/tc-aarch64.c (reloc_table_entry): Generate
-	BFD_RELOC_AARCH64_TLSGD_ADR_PREL21.
-	(md_apply_fix, aarch64_force_relocation): Handle
-	BFD_RELOC_AARCH64_TLSGD_ADR_PREL21.
-
-2015-02-19  Marcus Shawcroft  <marcus.shawcroft@arm.com>
-
-	* config/tc-aarch64.c (reloc_table_entry): Generate
-	BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_PREL19.
-	(md_apply_fix, aarch64_force_relocation): Handle
-	BFD_RELOC_AARCH64_TLSIE_LD_GOTTPREL_PREL19.
-
-2015-02-26  Marcus Shawcroft  <marcus.shawcroft@arm.com>
-
-	* config/tc-aarch64.c (reloc_table_entry): Add ld_literal_type.
-	(reloc_table): Likewise.
-	(parse_address_main): Use ld_literal_type.
-
-2015-02-26  Marcus Shawcroft  <marcus.shawcroft@arm.com>
-
-	* config/tc-aarch64.c (reloc_table_entry): Add adr_type.
-	(reloc_table): Likewise.
-	(parse_address_main): Use adr_type.
-
-2015-02-26  Marcus Shawcroft  <marcus.shawcroft@arm.com>
-
-	* config/tc-aarch64.c (aarch64_arch_any, aarch64_arch_node): Remove.
-
-2015-02-25  Andrew Burgess  <andrew.burgess@embecosm.com>
-
-	* config/tc-avr.c: Add elf32-avr.h include.
-	(struct avr_property_record_link): New structure.
-	(avr_output_property_section_header): New function.
-	(avr_record_size): New function.
-	(avr_output_property_record): New function.
-	(avr_create_property_section): New function.
-	(avr_handle_align): New function.
-	(exclude_section_from_property_tables): New function.
-	(create_record_for_frag): New function.
-	(append_records_for_section): New function.
-	(avr_create_and_fill_property_section): New function.
-	(avr_post_relax_hook): New function.
-	* config/tc-avr.h (md_post_relax_hook): Define.
-	(avr_post_relax_hook): Declare.
-	(HANDLE_ALIGN): Define.
-	(avr_handle_align): Declare.
-	(strut avr_frag_data): New structure.
-	(TC_FRAG_TYPE): Define.
-
-2015-02-25  Matthew Wahab  <matthew.wahab@arm.com>
-
-	* doc/c-arm.texi (-mcpu=): Add cortex-a53, cortex-a57 and
-	cortex-a72.
-
-2015-02-24  Nick Clifton  <nickc@redhat.com>
-
-	* config/tc-v850.c (soft_float): New variable.
-	(v850_data_8): New variable.
-	(md_show_usage): Add -msoft-float/-mhard-float.
-	(md_parse_option): Likewise.
-	(md_begin): Set the default value of soft_float.
-	(v850_md_end): New function.  Creates a note section.
-	* config/tc-v850.h (md_end): Define.
-	* doc/c-v850.texi: Document -msoft-float/-mhard-float.
-
-2015-02-23  Yoshinori Sato  <ysato@users.sourceforge.jp>
-
-	* config/tc-h8300.c (line_separater_chars): Add a version for
-	h8300-linux that includes a separator.
-	(default_mach): New variable.
-	(md_main): Use it.
-	(md_longopts): Add '--march' option.
-	(md_parse_option): Parse the new option.
-	* config/tc-h8300.h (TARGET_FORMAT): Add elf32-h8300-linux.
-	* configure.tgt: Add h8300-*-linux
-	* doc/c-h8300.texi: Document --march.
-
-2015-02-23  Nick Clifton  <nickc@redhat.com>
-
-	PR 17940
-	* dwarf2dbg.c (out_header): When generating dwarf sections use
-	real symbols not temps for the start and end symbols.
-	* config/tc-msp430.h (TC_FORCE_RELOCATION_SUB_SAME): Also prevent
-	adjustments to relocations in debug sections.
-	(TC_LINKRELAX_FIXUP): Likewise.
-
-2015-02-19  Alan Modra  <amodra@gmail.com>
-
-	* doc/as.texinfo (Local Symbol Names): Don't use ':' in pxref.
-	* doc/c-i386.texi: Reorder i386-Bugs after i386-Arch.
-
-2015-02-11  Matthew Wahab  <matthew.wahab@arm.com>
-
-	* config/tc-aarch64.c (aarch64_cpus): Fix code formatting.
-
-2015-02-11  Matthew Wahab  <matthew.wahab@arm.com>
-
-	* config/tc-arm.c: Add support for Cortex-A72.
-
-2015-02-09  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>
-
-	* config/tc-arm.c (warn_deprecated_sp): Use as_tsktsk instead
-	of as_warn for deprecation messages.
-	(encode_arm_addr_mode_2): Likewise.
-	(check_obsolete): Likewise.
-	(do_rd_rm_rn): Likewise.
-	(do_co_reg): Likewise.
-	(do_setend): Likewise.
-	(do_t_mov_cmp): Likewise.
-	(do_neon_ldr_str): Likewise.
-	(opcode_lookup): Likewise.
-	(if_fsm_post_encode): Likewise.
-	(md_assemble): Likewise.
-
-2015-02-06  Jan Beulich  <jbeulich@suse.com>
-
-	* dw2gencfi.c (select_cie_for_fde): Also bail on CFI_label.
-	(cfi_change_reg_numbers): Also do nothing for CFI_label.
-	(cfi_pseudo_table): Also handle .cfi_label when not supporting
-	CFI directives.
-
-2015-02-05  Alan Modra  <amodra@gmail.com>
-
-	* config/tc-msp430.c (md_assemble): Correct size passed to
-	extract_cmd.  Remove index check.
-
-2015-02-04  Matthew Wahab  <matthew.wahab@arm.com>
-
-	* config/tc-aarch64.c (aarch64_cpus): Add support for Cortex-A72.
-	* doc/c-aarch64.texi (-mcpu=): Add "cortex-a72".
-
-2015-02-04  Nick Clifton  <nickc@redhat.com>
-
-	* config/rl78-parse.y (addsubw): Fix encoding of [HL] variant of
-	these instructions.
-
-2015-02-03  Renlin Li  <renlin.li@arm.com>
-
-	* doc/c-aarch64.texi (.arch): Document the directive.
-	(.arch_extension): Likewise.
-
-2015-02-03  Nick Clifton  <nickc@redhat.com>
-
-	* config/tc-rl78.h (TC_PARSE_CONS_EXPRESSION): Define.
-
-2015-01-28  James Bowman  <james.bowman@ftdichip.com>
-
-	* Makefile.am: Add FT32 files.
-	* config/tc-ft32.c: New file.
-	* config/tc-ft32.h: New file.
-	* configure.tgt: Add FT32 support.
-	* Makefile.in: Regenerate.
-	* po/POTFILES.in: Regenerate.
-
-2015-01-27  Kuan-Lin Chen  <kuanlinchentw@gmail.com>
-
-	* config/tc-nds32.c (do_pseudo_la_internal): Limit the second argument
-	of instruction la to a symbol.
-
-2015-01-27  Kuan-Lin Chen  <kuanlinchentw@gmail.com>
-
-	* config/tc-nds32.c (nds32_parse_name): Ignore when the input is
-	section name.
-
-2015-01-19  Alan Modra  <amodra@gmail.com>
-
-	* read.c (s_reloc): Match BFD_RELOC_NONE, BFD_RELOC{8,16,32,64}.
-	* write.c (get_frag_for_reloc): Allow match just past end of frag.
-
-2015-01-16  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>
-
-	* config/tc-s390.c (struct pd_reg): Remove.
-	(pre_defined_registers): Remove.
-	(REG_NAME_CNT): Remove.
-	(reg_name_search): Calculate the register number instead of doing
-	a lookup.
-	(register_name, tc_s390_regname_to_dw2regnum): Adopt to the new
-	reg_name_search signature.
-	(s390_parse_cpu): Support the new arch string z13.
-	(s390_insert_operand): Support for vector registers with the extra
-	field for the fifth bit of each vector register operand.
-	(md_gather_operand): Adjust to the new handling of optional
-	parameters.
-
-	* doc/as.texinfo: Document the z13 cpu string.
-
-2015-01-13  Matthew Wahab  <matthew.wahab@arm.com>
-
-	* config/tc-arm.c (parse_ifimm_zero): Accept #0x0 as a synonym for
-	#0, restoring previous behaviour.
-
-2015-01-12  Jan Beulich  <jbeulich@suse.com>
-
-	* dw2gencfi.c (cfi_add_label, dot_cfi_label): New.
-	(cfi_pseudo_table): Add "cfi_label".
-	(output_cfi_insn): Handle CFI_label.
-	(select_cie_for_fde): Als terminate CIE when encountering
-	CFI_label.
-	* dw2gencfi.h (cfi_add_label): Declare.
-	(struct cfi_insn_data): New member "sym_name".
-	(CFI_label): New.
-	* read.c (read_symbol_name): Drop "static".
-	* read.h (read_symbol_name): Declare.
-
-2015-01-12  Jan Beulich  <jbeulich@suse.com>
-
-	* config/tc-arm.c (do_neon_shl_imm): Check immediate range.
-	(do_neon_qshl_imm): Likewise.
-
-2015-01-12  Alan Modra  <amodra@gmail.com>
-
-	* read.c (s_altmacro, s_reloc): Make definition static.
-
-2015-01-10  Andrew Burgess  <andrew.burgess@embecosm.com>
-
-	* config/tc-avr.c (md_apply_fix): Update the contents of VALP for
-	diff fixups.
-
-2015-01-09  Philipp Tomsich  <philipp.tomsich@theobroma-systems.com>
-
-	* config/tc-arm.c (arm_cpus): Add support for APM X-Gene 1 and
-	X-Gene 2.
-	* doc/c-arm.texi (ARM Options): Mention xgene1 and xgene2.
-
-2015-01-07  Jan Beulich <jbeulich@suse.com>
-
-	* config/tc-arm.c (struct arm_option_extension_value_table):
-	Split field "value" into fields "merge_value" and "clear_value".
-	(arm_extensions): Adjust initializer accordingly.
-
-2015-01-01  Alan Modra  <amodra@gmail.com>
-
-	* as.c (parse_args): Just print current year.
-
-2015-01-01  Alan Modra  <amodra@gmail.com>
-
-	Update year range in copyright notice of all files.
-
-For older changes see ChangeLog-2014
-
-Copyright (C) 2015 Free Software Foundation, Inc.
-
-Copying and distribution of this file, with or without modification,
-are permitted in any medium without royalty provided the copyright
-notice and this notice are preserved.
-
-Local Variables:
-mode: change-log
-left-margin: 8
-fill-column: 74
-version-control: never
-End: