This commit was manufactured by cvs2svn to create branchcagney_offbyone-20030303-branchpoint

'cagney_offbyone-20030303-branch'.

Sprout from interps-20030202-branch 2003-02-02 23:00:07 UTC nobody 'This commit was manufactured by cvs2svn to create branch'
Cherrypick from master 2003-03-03 20:50:20 UTC Andrew Cagney <cagney@redhat.com> '2003-03-03  Andrew Cagney  <cagney@redhat.com>':
    ChangeLog
    Makefile.def
    Makefile.in
    Makefile.tpl
    bfd/ChangeLog
    bfd/Makefile.am
    bfd/Makefile.in
    bfd/archures.c
    bfd/bfd-in.h
    bfd/bfd-in2.h
    bfd/bfd.c
    bfd/coff-h8300.c
    bfd/coff-ppc.c
    bfd/coffcode.h
    bfd/config.bfd
    bfd/cpu-arm.c
    bfd/doc/ChangeLog
    bfd/doc/bfd.texinfo
    bfd/doc/fdl.texi
    bfd/ecoff.c
    bfd/elf-bfd.h
    bfd/elf-eh-frame.c
    bfd/elf.c
    bfd/elf32-arm.h
    bfd/elf32-cris.c
    bfd/elf32-hppa.c
    bfd/elf32-i386.c
    bfd/elf32-m68k.c
    bfd/elf32-mips.c
    bfd/elf32-ppc.c
    bfd/elf32-ppc.h
    bfd/elf32-s390.c
    bfd/elf32-sh.c
    bfd/elf32-sparc.c
    bfd/elf32-vax.c
    bfd/elf64-alpha.c
    bfd/elf64-hppa.c
    bfd/elf64-mips.c
    bfd/elf64-mmix.c
    bfd/elf64-ppc.c
    bfd/elf64-ppc.h
    bfd/elf64-s390.c
    bfd/elf64-sparc.c
    bfd/elf64-x86-64.c
    bfd/elfcore.h
    bfd/elflink.c
    bfd/elflink.h
    bfd/elfn32-mips.c
    bfd/elfxx-ia64.c
    bfd/elfxx-mips.c
    bfd/format.c
    bfd/ieee.c
    bfd/libbfd.h
    bfd/libcoff.h
    bfd/mmo.c
    bfd/oasys.c
    bfd/po/da.po
    bfd/reloc.c
    bfd/section.c
    bfd/syms.c
    bfd/targets.c
    bfd/version.h
    config.guess
    config.sub
    configure
    configure.in
    gdb/ChangeLog
    gdb/MAINTAINERS
    gdb/Makefile.in
    gdb/NEWS
    gdb/PROBLEMS
    gdb/TODO
    gdb/acinclude.m4
    gdb/aclocal.m4
    gdb/ada-exp.y
    gdb/ada-lang.c
    gdb/ada-lang.h
    gdb/ada-typeprint.c
    gdb/alpha-tdep.c
    gdb/arch-utils.c
    gdb/arm-linux-tdep.c
    gdb/arm-tdep.c
    gdb/avr-tdep.c
    gdb/ax-gdb.c
    gdb/block.c
    gdb/block.h
    gdb/blockframe.c
    gdb/breakpoint.c
    gdb/breakpoint.h
    gdb/buildsym.c
    gdb/buildsym.h
    gdb/c-exp.y
    gdb/c-valprint.c
    gdb/cli-out.c
    gdb/cli-out.h
    gdb/cli/cli-cmds.c
    gdb/cli/cli-decode.c
    gdb/cli/cli-dump.c
    gdb/cli/cli-interp.c
    gdb/cli/cli-script.c
    gdb/cli/cli-setshow.c
    gdb/coff-pe-read.c
    gdb/coff-pe-read.h
    gdb/coffread.c
    gdb/config.in
    gdb/config/djgpp/fnchange.lst
    gdb/config/h8500/h8500.mt
    gdb/config/h8500/tm-h8500.h
    gdb/config/i386/nm-i386.h
    gdb/config/i386/nm-i386sco5.h
    gdb/config/i386/nm-i386sol2.h
    gdb/config/i386/tm-ptx.h
    gdb/config/ia64/tm-ia64.h
    gdb/config/m32r/m32r.mt
    gdb/config/m32r/tm-m32r.h
    gdb/config/mn10200/mn10200.mt
    gdb/config/mn10200/tm-mn10200.h
    gdb/config/pa/tm-hppa.h
    gdb/config/pa/tm-hppa64.h
    gdb/config/s390/nm-linux.h
    gdb/config/sparc/nm-sun4sol2.h
    gdb/config/sparc/tm-sp64.h
    gdb/config/sparc/tm-sparc.h
    gdb/config/z8k/tm-z8k.h
    gdb/config/z8k/z8k.mt
    gdb/configure
    gdb/configure.host
    gdb/configure.in
    gdb/configure.tgt
    gdb/cp-valprint.c
    gdb/cris-tdep.c
    gdb/d10v-tdep.c
    gdb/dbxread.c
    gdb/defs.h
    gdb/disasm.c
    gdb/doc/ChangeLog
    gdb/doc/Makefile.in
    gdb/doc/gdb.texinfo
    gdb/doc/gdbint.texinfo
    gdb/doublest.c
    gdb/dwarf2cfi.c
    gdb/dwarf2expr.c
    gdb/dwarf2expr.h
    gdb/dwarf2loc.c
    gdb/dwarf2loc.h
    gdb/dwarf2read.c
    gdb/dwarfread.c
    gdb/elfread.c
    gdb/event-top.c
    gdb/event-top.h
    gdb/expprint.c
    gdb/f-exp.y
    gdb/f-lang.c
    gdb/f-valprint.c
    gdb/findvar.c
    gdb/frame.c
    gdb/frame.h
    gdb/frv-tdep.c
    gdb/gdb.c
    gdb/gdb_mbuild.sh
    gdb/gdb_thread_db.h
    gdb/gdbarch.c
    gdb/gdbarch.h
    gdb/gdbarch.sh
    gdb/gdbtypes.c
    gdb/gdbtypes.h
    gdb/gnu-v2-abi.c
    gdb/h8300-tdep.c
    gdb/h8500-tdep.c
    gdb/hppa-tdep.c
    gdb/hpread.c
    gdb/hpux-thread.c
    gdb/i386-interix-tdep.c
    gdb/i386-linux-tdep.c
    gdb/i386-tdep.c
    gdb/i386bsd-tdep.c
    gdb/ia64-linux-nat.c
    gdb/ia64-tdep.c
    gdb/infcmd.c
    gdb/inflow.c
    gdb/inflow.h
    gdb/infptrace.c
    gdb/infrun.c
    gdb/inftarg.c
    gdb/infttrace.c
    gdb/interps.c
    gdb/interps.h
    gdb/jv-exp.y
    gdb/jv-lang.c
    gdb/jv-typeprint.c
    gdb/jv-valprint.c
    gdb/linespec.c
    gdb/linux-proc.c
    gdb/lynx-nat.c
    gdb/m2-exp.y
    gdb/m32r-rom.c
    gdb/m32r-stub.c
    gdb/m32r-tdep.c
    gdb/m68hc11-tdep.c
    gdb/m68k-tdep.c
    gdb/main.c
    gdb/main.h
    gdb/maint.c
    gdb/mcore-tdep.c
    gdb/mdebugread.c
    gdb/mi/ChangeLog
    gdb/mi/gdbmi.texinfo
    gdb/mi/mi-cmd-env.c
    gdb/mi/mi-cmd-stack.c
    gdb/mi/mi-cmds.c
    gdb/mi/mi-cmds.h
    gdb/mi/mi-console.c
    gdb/mi/mi-console.h
    gdb/mi/mi-interp.c
    gdb/mi/mi-main.c
    gdb/mi/mi-main.h
    gdb/minsyms.c
    gdb/mips-tdep.c
    gdb/mipsread.c
    gdb/mn10200-tdep.c
    gdb/mn10300-tdep.c
    gdb/monitor.c
    gdb/nlmread.c
    gdb/ns32k-tdep.c
    gdb/objc-exp.y
    gdb/objc-lang.c
    gdb/objc-lang.h
    gdb/objfiles.c
    gdb/objfiles.h
    gdb/observer.c
    gdb/observer.h
    gdb/osabi.c
    gdb/p-exp.y
    gdb/p-valprint.c
    gdb/parse.c
    gdb/parser-defs.h
    gdb/ppc-linux-nat.c
    gdb/ppc-linux-tdep.c
    gdb/printcmd.c
    gdb/proc-api.c
    gdb/procfs.c
    gdb/rdi-share/ardi.c
    gdb/regcache.c
    gdb/regcache.h
    gdb/remote-e7000.c
    gdb/remote-sim.c
    gdb/remote.c
    gdb/rs6000-tdep.c
    gdb/s390-tdep.c
    gdb/sh-tdep.c
    gdb/sol-thread.c
    gdb/solib-sunos.c
    gdb/solib.c
    gdb/solist.h
    gdb/somread.c
    gdb/somsolib.c
    gdb/sparc-nat.c
    gdb/sparc-tdep.c
    gdb/stabsread.c
    gdb/stack.c
    gdb/symfile.c
    gdb/symfile.h
    gdb/symm-nat.c
    gdb/symmisc.c
    gdb/symtab.c
    gdb/symtab.h
    gdb/target.c
    gdb/target.h
    gdb/testsuite/ChangeLog
    gdb/testsuite/Makefile.in
    gdb/testsuite/configure.in
    gdb/testsuite/gdb.base/advance.c
    gdb/testsuite/gdb.base/advance.exp
    gdb/testsuite/gdb.base/dump.exp
    gdb/testsuite/gdb.base/exprs.exp
    gdb/testsuite/gdb.base/funcargs.exp
    gdb/testsuite/gdb.base/list.exp
    gdb/testsuite/gdb.base/maint.exp
    gdb/testsuite/gdb.base/ptype.exp
    gdb/testsuite/gdb.base/restore.c
    gdb/testsuite/gdb.base/until.exp
    gdb/testsuite/gdb.base/watchpoint.exp
    gdb/testsuite/gdb.c++/anon-union.exp
    gdb/testsuite/gdb.c++/classes.exp
    gdb/testsuite/gdb.c++/cplusfuncs.exp
    gdb/testsuite/gdb.c++/inherit.exp
    gdb/testsuite/gdb.c++/local.cc
    gdb/testsuite/gdb.c++/local.exp
    gdb/testsuite/gdb.c++/overload.cc
    gdb/testsuite/gdb.c++/overload.exp
    gdb/testsuite/gdb.c++/ovldbreak.exp
    gdb/testsuite/gdb.c++/pr-1023.cc
    gdb/testsuite/gdb.c++/pr-1023.exp
    gdb/testsuite/gdb.c++/templates.exp
    gdb/testsuite/gdb.c++/virtfunc.exp
    gdb/testsuite/gdb.disasm/Makefile.in
    gdb/testsuite/gdb.disasm/mn10200.exp
    gdb/testsuite/gdb.mi/ChangeLog
    gdb/testsuite/gdb.mi/mi-cli.exp
    gdb/testsuite/gdb.mi/mi-syn-frame.c
    gdb/testsuite/gdb.mi/mi-syn-frame.exp
    gdb/testsuite/gdb.trace/Makefile.in
    gdb/testsuite/lib/gdb.exp
    gdb/thread.c
    gdb/top.c
    gdb/tracepoint.c
    gdb/tui/ChangeLog
    gdb/tui/tui-hooks.c
    gdb/tui/tui-interp.c
    gdb/tui/tui.c
    gdb/tui/tuiData.h
    gdb/tui/tuiIO.c
    gdb/typeprint.c
    gdb/ui-out.c
    gdb/ui-out.h
    gdb/utils.c
    gdb/v850-tdep.c
    gdb/valops.c
    gdb/value.h
    gdb/values.c
    gdb/vax-tdep.c
    gdb/version.in
    gdb/win32-nat.c
    gdb/wrapper.h
    gdb/x86-64-linux-nat.c
    gdb/x86-64-tdep.c
    gdb/xcoffread.c
    gdb/xstormy16-tdep.c
    gdb/z8k-tdep.c
    include/ChangeLog
    include/elf/ChangeLog
    include/elf/arm.h
    include/elf/ia64.h
    include/elf/ppc.h
    include/elf/ppc64.h
    include/gdb/ChangeLog
    include/gdb/remote-sim.h
    include/libiberty.h
    include/opcode/ChangeLog
    include/opcode/h8300.h
    libiberty/ChangeLog
    libiberty/Makefile.in
    libiberty/acconfig.h
    libiberty/aclocal.m4
    libiberty/config.in
    libiberty/configure
    libiberty/configure.in
    libiberty/cplus-dem.c
    libiberty/functions.texi
    libiberty/libiberty.texi
    libiberty/lrealpath.c
    libiberty/make-relative-prefix.c
    libiberty/physmem.c
    libtool.m4
    ltcf-cxx.sh
    ltcf-gcj.sh
    ltconfig
    opcodes/ChangeLog
    opcodes/fr30-desc.c
    opcodes/hppa-dis.c
    opcodes/i386-dis.c
    opcodes/mips-dis.c
    readline/ChangeLog.gdb
    readline/Makefile.in
    readline/aclocal.m4
    readline/config.h.in
    readline/configure
    readline/rlmbutil.h
    readline/shlib/Makefile.in
    sim/ChangeLog
    sim/arm/ChangeLog
    sim/arm/armos.c
    sim/arm/wrapper.c
    sim/common/ChangeLog
    sim/common/Make-common.in
    sim/common/nrun.c
    sim/common/sim-base.h
    sim/common/sim-engine.c
    sim/common/sim-engine.h
    sim/common/sim-hload.c
    sim/common/sim-module.c
    sim/common/sim-utils.h
    sim/d10v/ChangeLog
    sim/d10v/interp.c
    sim/erc32/ChangeLog
    sim/erc32/interf.c
    sim/h8300/ChangeLog
    sim/h8300/compile.c
    sim/h8500/ChangeLog
    sim/h8500/compile.c
    sim/i960/ChangeLog
    sim/i960/sim-if.c
    sim/m32r/ChangeLog
    sim/m32r/sim-if.c
    sim/m68hc11/ChangeLog
    sim/m68hc11/Makefile.in
    sim/m68hc11/interp.c
    sim/mcore/ChangeLog
    sim/mcore/interp.c
    sim/mips/ChangeLog
    sim/mips/interp.c
    sim/mn10200/ChangeLog
    sim/mn10200/interp.c
    sim/mn10300/ChangeLog
    sim/mn10300/am33.igen
    sim/mn10300/dv-mn103tim.c
    sim/mn10300/interp.c
    sim/ppc/ChangeLog
    sim/ppc/sim_calls.c
    sim/sh/ChangeLog
    sim/sh/gencode.c
    sim/sh/interp.c
    sim/v850/ChangeLog
    sim/v850/interp.c
    sim/z8k/ChangeLog
    sim/z8k/iface.c
Delete:
    gdb/config/i386/gdbserve.mt
    gdb/config/i386/i386sco5.mt
    gdb/config/i386/i386v4.mt
    gdb/config/i386/i386v42mp.mt
    gdb/config/m68k/nm-apollo68b.h
    gdb/config/m68k/nm-hp300bsd.h
    gdb/config/m68k/tm-apollo68b.h
    gdb/config/m68k/tm-es1800.h
    gdb/config/m68k/tm-hp300bsd.h
    gdb/config/m68k/tm-mac.h
    gdb/config/m68k/xm-apollo68b.h
    gdb/config/pa/hpux1020.mt
    gdb/config/pa/hpux11.mt
    gdb/config/pa/hpux11w.mt
    gdb/config/powerpc/gdbserve.mt
    gdb/config/powerpc/ppcle-eabi.mt
    gdb/config/powerpc/ppcle-sim.mt
    gdb/config/powerpc/tm-ppc-sim.h
    gdb/config/sparc/sp64sim.mt
    gdb/config/sparc/tm-sp64sim.h
    sim/common/sim-break.c
    sim/common/sim-break.h

1 files changed, 94 insertions, 77 deletions

diff --git a/configure b/configure
index a6fc0f0..80edfe1 100755
--- a/configure
+++ b/configure
@@ -16,6 +16,9 @@ ac_help="$ac_help
                           Don't force sequential configuration of
                           sub-packages for the host, target or build
 			  machine, or of any sub-packages at all"
+ac_help="$ac_help
+  --enable-maintainer-mode enable make rules and dependencies not useful
+                          (and sometimes confusing) to the casual installer"
 
 # Initialize some variables set by options.
 # The variables have the same names as the options, with
@@ -574,7 +577,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:578: checking host system type" >&5
+echo "configure:592: checking host system type" >&5
 
 host_alias=$host
 case "$host_alias" in
@@ -595,7 +598,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$host" 1>&6
 
 echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:599: checking target system type" >&5
+echo "configure:613: checking target system type" >&5
 
 target_alias=$target
 case "$target_alias" in
@@ -613,7 +616,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$target" 1>&6
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:617: checking build system type" >&5
+echo "configure:631: checking build system type" >&5
 
 build_alias=$build
 case "$build_alias" in
@@ -792,7 +795,7 @@ fi
 
 # these libraries are used by various programs built for the host environment
 #
-host_libs="intl mmalloc libiberty opcodes bfd readline db tcl tk itcl tix libgui zlib"
+host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl tix libgui zlib"
 
 libstdcxx_version="target-libstdc++-v3"
 
@@ -801,7 +804,7 @@ libstdcxx_version="target-libstdc++-v3"
 # know that we are building the simulator.
 # binutils, gas and ld appear in that order because it makes sense to run
 # "make check" in that particular order.
-host_tools="texinfo byacc flex bison binutils gas ld gcc sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool grep diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils snavigator gettext zip fastjar"
+host_tools="texinfo byacc flex bison binutils gas ld gcc sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar"
 
 # libgcj represents the runtime libraries only used by gcj.
 libgcj="target-libffi \
@@ -915,7 +918,7 @@ esac
 
 # Some tools are only suitable for building in a "native" situation.
 # Remove these if host!=target.  
-native_only="autoconf automake libtool fileutils find gawk gettext grep gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff gprof target-groff guile perl time ash bash bzip2 prms snavigator gnuserv target-gperf"
+native_only="autoconf automake libtool fileutils find gawk gettext gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff gprof target-groff guile perl time ash bash bzip2 prms gnuserv target-gperf"
 
 # Similarly, some are only suitable for cross toolchains.
 # Remove these if host=target.
@@ -956,13 +959,13 @@ case "${host}" in
     noconfigdirs="$noconfigdirs byacc"
     ;;
   i[3456]86-*-vsta)
-    noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl tix db snavigator gnuserv gettext"
+    noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl tix gnuserv gettext"
     ;;
   i[3456]86-*-go32* | i[3456]86-*-msdosdjgpp*)
-    noconfigdirs="tcl tk expect dejagnu send-pr uudecode guile itcl tix db snavigator gnuserv libffi"
+    noconfigdirs="tcl tk expect dejagnu send-pr uudecode guile itcl tix gnuserv libffi"
 	;;
   i[3456]86-*-mingw32*)
-    # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl tix db snavigator gnuserv"
+    # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl tix gnuserv"
      noconfigdirs="expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool"
 	;;
   i[3456]86-*-beos*)
@@ -975,7 +978,7 @@ case "${host}" in
     noconfigdirs="rcs"
     ;;
   ppc*-*-pe)
-     noconfigdirs="patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl tix db snavigator gnuserv"
+     noconfigdirs="patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl tix gnuserv"
     ;;
   powerpc-*-beos*)
     noconfigdirs="$noconfigdirs tk itcl tix libgui gdb dejagnu readline"
@@ -1005,9 +1008,20 @@ case "${target}" in
   *-*-chorusos)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
     ;;
+  *-*-darwin*)
+    noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
+    noconfigdirs="$noconfigdirs target-libobjc ${libgcj}"
+    ;;
   *-*-freebsd[12] | *-*-freebsd[12].* | *-*-freebsd*aout*)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
     ;;
+  *-*-kaos*)
+    # Remove unsupported stuff on all kaOS configurations.
+    skipdirs="target-libiberty ${libgcj} ${libstdcxx_version} target-libf2c target-librx"
+    skipdirs="$skipdirs target-libobjc target-examples target-groff target-gperf"
+    skipdirs="$skipdirs zlib fastjar target-libjava target-boehm-gc target-zlib"
+    noconfigdirs="$noconfigdirs target-libgloss"
+    ;;
   *-*-netbsd*)
     # Skip some stuff on all NetBSD configurations.
     noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss"
@@ -1192,7 +1206,7 @@ case "${target}" in
     # Can't build gdb for mingw32 if not native.
     case "${host}" in
       i[3456]86-*-mingw32) ;; # keep gdb tcl tk expect etc.
-      *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix db snavigator gnuserv"
+      *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix gnuserv"
          ;;
     esac
     ;;    
@@ -1205,7 +1219,7 @@ case "${target}" in
     # Can't build gdb for Cygwin if not native.
     case "${host}" in
       *-*-cygwin*) ;; # keep gdb tcl tk expect etc.
-      *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix libgui db snavigator gnuserv"
+      *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix libgui gnuserv"
          ;;
     esac
     ;;    
@@ -1258,20 +1272,17 @@ case "${target}" in
     ;;
   powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
     target_configdirs="$target_configdirs target-winsup"
-    noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl tix db snavigator gnuserv ${libgcj}"
+    noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl tix gnuserv ${libgcj}"
     # always build newlib.
     skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
     ;;
     # This is temporary until we can link against shared libraries
   powerpcle-*-solaris*)
-    noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl tix db snavigator gnuserv ${libgcj}"
+    noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl tix gnuserv ${libgcj}"
     ;;
   powerpc-*-beos*)
     noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
     ;;
-  powerpc-*-darwin*)
-    noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof ${libgcj}"
-    ;;
   powerpc-*-eabi)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
@@ -2737,7 +2748,7 @@ test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
   # Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2741: checking for $ac_word" >&5
+echo "configure:2763: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2770,7 +2781,7 @@ if test -z "$ac_cv_prog_AR" ; then
     # Extract the first word of "ar", so it can be a program name with args.
 set dummy ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2774: checking for $ac_word" >&5
+echo "configure:2796: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2809,7 +2820,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2813: checking for $ac_word" >&5
+echo "configure:2835: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2842,7 +2853,7 @@ if test -z "$ac_cv_prog_AS" ; then
     # Extract the first word of "as", so it can be a program name with args.
 set dummy as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2846: checking for $ac_word" >&5
+echo "configure:2868: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2881,7 +2892,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2885: checking for $ac_word" >&5
+echo "configure:2907: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2914,7 +2925,7 @@ if test -z "$ac_cv_prog_DLLTOOL" ; then
     # Extract the first word of "dlltool", so it can be a program name with args.
 set dummy dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2918: checking for $ac_word" >&5
+echo "configure:2940: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2953,7 +2964,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2957: checking for $ac_word" >&5
+echo "configure:2979: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2986,7 +2997,7 @@ if test -z "$ac_cv_prog_LD" ; then
     # Extract the first word of "ld", so it can be a program name with args.
 set dummy ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2990: checking for $ac_word" >&5
+echo "configure:3012: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3025,7 +3036,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3029: checking for $ac_word" >&5
+echo "configure:3051: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3058,7 +3069,7 @@ if test -z "$ac_cv_prog_NM" ; then
     # Extract the first word of "nm", so it can be a program name with args.
 set dummy nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3062: checking for $ac_word" >&5
+echo "configure:3084: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3097,7 +3108,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3101: checking for $ac_word" >&5
+echo "configure:3123: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3130,7 +3141,7 @@ if test -z "$ac_cv_prog_RANLIB" ; then
     # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3134: checking for $ac_word" >&5
+echo "configure:3156: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3169,7 +3180,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3173: checking for $ac_word" >&5
+echo "configure:3195: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3202,7 +3213,7 @@ if test -z "$ac_cv_prog_WINDRES" ; then
     # Extract the first word of "windres", so it can be a program name with args.
 set dummy windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3206: checking for $ac_word" >&5
+echo "configure:3228: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3241,7 +3252,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}objcopy; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3245: checking for $ac_word" >&5
+echo "configure:3267: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3274,7 +3285,7 @@ if test -z "$ac_cv_prog_OBJCOPY" ; then
     # Extract the first word of "objcopy", so it can be a program name with args.
 set dummy objcopy; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3278: checking for $ac_word" >&5
+echo "configure:3300: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3313,7 +3324,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}objdump; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3317: checking for $ac_word" >&5
+echo "configure:3339: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3346,7 +3357,7 @@ if test -z "$ac_cv_prog_OBJDUMP" ; then
     # Extract the first word of "objdump", so it can be a program name with args.
 set dummy objdump; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3350: checking for $ac_word" >&5
+echo "configure:3372: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3394,7 +3405,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3398: checking for $ac_word" >&5
+echo "configure:3420: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3427,7 +3438,7 @@ if test -z "$ac_cv_prog_AR_FOR_TARGET" ; then
     # Extract the first word of "ar", so it can be a program name with args.
 set dummy ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3431: checking for $ac_word" >&5
+echo "configure:3453: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3466,7 +3477,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3470: checking for $ac_word" >&5
+echo "configure:3492: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3499,7 +3510,7 @@ if test -z "$ac_cv_prog_AS_FOR_TARGET" ; then
     # Extract the first word of "as", so it can be a program name with args.
 set dummy as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3503: checking for $ac_word" >&5
+echo "configure:3525: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3538,7 +3549,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3542: checking for $ac_word" >&5
+echo "configure:3564: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3571,7 +3582,7 @@ if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" ; then
     # Extract the first word of "dlltool", so it can be a program name with args.
 set dummy dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3575: checking for $ac_word" >&5
+echo "configure:3597: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3610,7 +3621,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3614: checking for $ac_word" >&5
+echo "configure:3636: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3643,7 +3654,7 @@ if test -z "$ac_cv_prog_LD_FOR_TARGET" ; then
     # Extract the first word of "ld", so it can be a program name with args.
 set dummy ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3647: checking for $ac_word" >&5
+echo "configure:3669: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3682,7 +3693,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3686: checking for $ac_word" >&5
+echo "configure:3708: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3715,7 +3726,7 @@ if test -z "$ac_cv_prog_NM_FOR_TARGET" ; then
     # Extract the first word of "nm", so it can be a program name with args.
 set dummy nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3719: checking for $ac_word" >&5
+echo "configure:3741: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3754,7 +3765,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3758: checking for $ac_word" >&5
+echo "configure:3780: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3787,7 +3798,7 @@ if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" ; then
     # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3791: checking for $ac_word" >&5
+echo "configure:3813: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3826,7 +3837,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3830: checking for $ac_word" >&5
+echo "configure:3852: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3859,7 +3870,7 @@ if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" ; then
     # Extract the first word of "windres", so it can be a program name with args.
 set dummy windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3863: checking for $ac_word" >&5
+echo "configure:3885: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3925,6 +3936,28 @@ AR_FOR_TARGET=${AR_FOR_TARGET}${extra_arflags_for_target}
 RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target}
 NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
 
+echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
+echo "configure:3952: checking whether to enable maintainer-specific portions of Makefiles" >&5
+# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then
+  enableval="$enable_maintainer_mode"
+  USE_MAINTAINER_MODE=$enableval
+else
+  USE_MAINTAINER_MODE=no
+fi
+
+echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
+
+
+if test "$USE_MAINTAINER_MODE" = yes; then
+  MAINTAINER_MODE_TRUE=
+  MAINTAINER_MODE_FALSE='#'
+else
+  MAINTAINER_MODE_TRUE='#'
+  MAINTAINER_MODE_FALSE=
+fi	
+MAINT=$MAINTAINER_MODE_TRUE
+
 trap '' 1 2 15
 cat > confcache <<\EOF
 # This file is a shell script that caches the results of configure
@@ -3991,34 +4024,15 @@ trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
 # Transform confdefs.h into DEFS.
 # Protect against shell expansion while executing Makefile rules.
 # Protect against Makefile macro expansion.
-#
-# If the first sed substitution is executed (which looks for macros that
-# take arguments), then we branch to the quote section.  Otherwise,
-# look for a macro that doesn't take arguments.
-cat >confdef2opt.sed <<\_ACEOF
-t clear
-: clear
-s,^[ 	]*#[ 	]*define[ 	][ 	]*\([^ 	(][^ 	(]*([^)]*)\)[ 	]*\(.*\),-D\1=\2,g
-t quote
-s,^[ 	]*#[ 	]*define[ 	][ 	]*\([^ 	][^ 	]*\)[ 	]*\(.*\),-D\1=\2,g
-t quote
-d
-: quote
-s,[ 	`~#$^&*(){}\\|;'"<>?],\\&,g
-s,\[,\\&,g
-s,\],\\&,g
-s,\$,$$,g
-p
-_ACEOF
-# We use echo to avoid assuming a particular line-breaking character.
-# The extra dot is to prevent the shell from consuming trailing
-# line-breaks from the sub-command output.  A line-break within
-# single-quotes doesn't work because, if this script is created in a
-# platform that uses two characters for line-breaks (e.g., DOS), tr
-# would break.
-ac_LF_and_DOT=`echo; echo .`
-DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
-rm -f confdef2opt.sed
+cat > conftest.defs <<\EOF
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
+s%[ 	`~#$^&*(){}\\|;'"<>?]%\\&%g
+s%\[%\\&%g
+s%\]%\\&%g
+s%\$%$$%g
+EOF
+DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
+rm -f conftest.defs
 
 
 # Without the "./", some shells look in PATH for config.status.
@@ -4200,6 +4214,9 @@ s%@CXX_FOR_TARGET@%$CXX_FOR_TARGET%g
 s%@RAW_CXX_FOR_TARGET@%$RAW_CXX_FOR_TARGET%g
 s%@CXX_FOR_TARGET_FOR_RECURSIVE_MAKE@%$CXX_FOR_TARGET_FOR_RECURSIVE_MAKE%g
 s%@RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE@%$RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE%g
+s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
+s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
+s%@MAINT@%$MAINT%g
 
 CEOF
 EOF