2004-08-26 Paolo Bonzini <bonzini@gnu.org>

	* Makefile.def (bootstrap stages): Add 'lean' parameter.
	* Makefile.tpl (configure-stageN-*, all-stageN-*): Turned into
	phony targets; do not generate timestamp files.
	(distclean-stageN): Remove references to their timestamp files.
	(restageN, touch-stageN): Remove.
	(stageN-bubble): Rewritten.
	(compare): Support lean bootstraps.
	* Makefile.in: Regenerate.

	* configure.in: Only warn when bootstrapping but
	build != host or build != target.  Support lean bootstraps.
	* configure: Regenerate.

	Sync from gcc:
	2004-08-26  Phil Edwards  <phil@codesourcery.com>

	* configure.in:  Give a better error message if GMP/MPFR are missing
	and a language needing them has been requested.
	* configure:  Regenerated.

	2004-08-25  Phil Edwards  <phil@codesourcery.com>

	* configure.in:  Print a list of available language front-ends if
	a requested one is missing.  Tidy stray tab characters.
	* configure:  Regenerated.

1 files changed, 67 insertions, 23 deletions

diff --git a/configure.in b/configure.in
index c84dc42..080ac0d 100644
--- a/configure.in
+++ b/configure.in
@@ -1161,6 +1161,7 @@ if test -d ${srcdir}/gcc; then
 
   new_enable_languages=c
   missing_languages=`echo ",$enable_languages," | sed -e s/,all,/,/ -e s/,c,/,/ `
+  potential_languages=c
 
   for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
     case ${lang_frag} in
@@ -1176,14 +1177,15 @@ if test -d ${srcdir}/gcc; then
         lang_dirs=
         boot_language=
         build_by_default=
-	need_gmp=
+        need_gmp=
         . ${lang_frag}
+        potential_languages="${potential_languages},${language}"
         # This is quite sensitive to the ordering of the case statement arms.
         case ,${enable_languages},:${language}:${have_gnat}:${build_by_default} in
           *::*:*)
             echo "${lang_frag} doesn't set \$language." 1>&2
             exit 1
-	    ;;
+            ;;
           *:ada:no:*)
             # Ada was requested with no preexisting GNAT.  Disable unconditionally.
             add_this_lang=no
@@ -1194,9 +1196,9 @@ if test -d ${srcdir}/gcc; then
             ;;
           *,all,*:*:*:no)
             # 'all' was selected, but this is not a default language
-	    # so do not include it.
+            # so do not include it.
             add_this_lang=no
-	    ;;
+            ;;
           *,all,*:*:*:*)
             # 'all' was selected and this is a default language; include it.
             add_this_lang=yes
@@ -1206,10 +1208,17 @@ if test -d ${srcdir}/gcc; then
             ;;
         esac
 
-	# Disable language that need GMP if it isn't available.
-	if test  x"$need_gmp" = xyes && test x"$have_gmp" = xno; then
-	  add_this_lang=no
-	fi
+        # Disable languages that need GMP if it isn't available.
+        case ,${enable_languages},:${have_gmp}:${need_gmp} in
+          *,${language},*:no:yes)
+            # Specifically requested language; tell them.
+            AC_MSG_ERROR([GMP with MPFR support is required to build $language])
+            ;;
+          *:no:yes)
+            # Silently disable.
+            add_this_lang=no
+            ;;
+        esac
         
 	case $add_this_lang in
 	  no)
@@ -1234,7 +1243,8 @@ if test -d ${srcdir}/gcc; then
   missing_languages=`echo "$missing_languages" | sed -e "s/^,//" -e "s/,$//"`
   if test "x$missing_languages" != x; then
     AC_MSG_ERROR([
-The following requested languages were not found: ${missing_languages}])
+The following requested languages were not found: ${missing_languages}
+The available languages are: ${potential_languages}])
   fi
 
   if test "x$new_enable_languages" != "x$enable_languages"; then
@@ -1685,28 +1695,62 @@ esac
 # not to nest @if/@endif pairs, because configure will not warn you at all.
 
 AC_ARG_ENABLE([bootstrap],
-[  --enable-bootstrap     Enable bootstrapping [no]],,
-enable_bootstrap=no)
-if test -d ${srcdir}/gcc; then
-  case "$host:$target:$enable_bootstrap" in
-    $build:$build:yes | *:no) ;;
-    *:yes) AC_MSG_ERROR([cannot bootstrap a cross-compiler]) ;;
-    *) AC_MSG_ERROR([invalid option for --enable-bootstrap]) ;;
-  esac
-else
-  if test $enable_bootstrap = yes; then
-    AC_MSG_ERROR([cannot bootstrap without a compiler])
-  fi
-fi
+[  --enable-bootstrap[=lean]     Enable bootstrapping [no]],,
+enable_bootstrap=default)
+
+# Issue errors and warnings for invalid/strange bootstrap combinations.
+case "$configdirs" in
+  *gcc*) have_compiler=yes ;;
+  *) have_compiler=no ;;
+esac
+
+case "$have_compiler:$host:$target:$enable_bootstrap" in
+  *:*:*:no) ;;
+
+  # Default behavior.  (We'll) enable bootstrap if we have a compiler
+  # and we are in a native configuration.
+  yes:$build:$build:default)
+    # This will become 'yes'
+    enable_bootstrap=no ;;
+
+  *:*:*:default)
+    enable_bootstrap=no ;;
+
+  # We have a compiler and we are in a native configuration, bootstrap is ok
+  yes:$build:$build:yes | yes:$build:$build:lean)
+    ;;
+
+  # Other configurations, but we have a compiler.  Assume the user knows
+  # what he's doing.
+  yes:*:*:yes | yes:*:*:lean)
+    AC_MSG_WARN([trying to bootstrap a cross compiler])
+    ;;
 
+  # No compiler: if they passed --enable-bootstrap explicitly, fail
+  no:*:*:yes | no:*:*:lean)
+    AC_MSG_ERROR([cannot bootstrap without a compiler]) ;;
+
+  # Fail if wrong command line
+  *)
+    AC_MSG_ERROR([invalid option for --enable-bootstrap])
+    ;;
+esac
+
+# Adjust the toplevel makefile according to whether bootstrap was selected.
 case "$enable_bootstrap" in
   yes)
+    bootstrap_lean='#'
+    default_target=bootstrap
+    bootstrap_suffix=bootstrap ;;
+  lean)
+    bootstrap_lean=''
     default_target=bootstrap
     bootstrap_suffix=bootstrap ;;
   no)
     default_target=all
     bootstrap_suffix=no-bootstrap ;;
 esac
+AC_SUBST(bootstrap_lean)
 AC_SUBST(default_target)
 
 for module in ${build_configdirs} ; do
@@ -2230,7 +2274,7 @@ esac
 AC_SUBST(stage1_cflags)
 
 # It makes debugging easier if we create as symlinks the stage directories
-# gcc for stageN-gcc and stage-prev for stage(N-1).  In case this is not
+# gcc for stageN-gcc and stagePREV-gcc for stage(N-1).  In case this is not
 # possible, however, we can resort to mv.
 AC_CACHE_CHECK([if symbolic links between directories work],
 [gcc_cv_prog_ln_s_dir],