Cleanups after the update to Autoconf 2.64, Automake 1.11.

/:
	* README-maintainer-mode: Point directly to upstream locations
	for autoconf, automake, libtool, gettext, instead of copies on
	sources.redhat.com.  Document required versions.
	* configure.ac: Do not substitute datarootdir, htmldir,
	pdfdir, docdir.  Do not process --with-datarootdir,
	--with-htmldir, --with-pdfdir, --with-docdir.
	* configure: Regenerate.

gdb/:
	* CONTRIBUTE: Bump documented Autoconf version.
	* configure.ac: Do not substitute datarootdir, htmldir,
	pdfdir, docdir.  Do not process --with-datarootdir,
	--with-htmldir, --with-pdfdir, --with-docdir.
	* configure: Regenerate.

gdb/doc/:
	* gdbint.texinfo (Releasing GDB): Point to
	README-maintainer-mode file for required autoconf version.
	* configure.ac: Do not substitute datarootdir, htmldir,
	pdfdir, docdir.  Do not process --with-datarootdir,
	--with-htmldir, --with-pdfdir, --with-docdir.
	* configure: Regenerate.

gprof/:
	* Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
	(install-pdf-recursive, html__strip_dir, install-html)
	(install-html-am, install-html-recursive): Remove.
	* Makefile.in: Regenerate.

opcodes/:
	* Makefile.am (install-pdf, install-html): Remove.
	* Makefile.in: Regenerate.

gas/:
	* Makefile.am (install-pdf, install-pdf-recursive, install-html)
	(install-html-recursive): Remove.
	* Makefile.in: Regenerate.
	* doc/Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
	(html__strip_dir, install-html, install-html-am): Remove.
	* doc/Makefile.in: Regenerate.

ld/:
	* Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
	(install-pdf-recursive, html__strip_dir, install-html)
	(install-html-am, install-html-recursive): Remove.
	* Makefile.in: Regenerate.

binutils/:
	* Makefile.am (install-pdf, install-pdf-recursive, install-html)
	(install-html-recursive): Remove.
	* Makefile.in: Regenerate.
	* doc/Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
	(html__strip_dir, install-html, install-html-am): Remove.
	* doc/Makefile.in: Regenerate.

bfd/:
	* Makefile.am (datarootdir, docdir, htmldor, pdfdir)
	(install-pdf, install-pdf-recursive, install-html)
	(install-html-recursive): Remove.
	* Makefile.in: Regenerate.

bfd/doc/:
	* Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am)
	(html__strip_dir, install-html, install-html-am): Remove.
	* Makefile.in: Regenerate.

1 files changed, 36 insertions, 33 deletions

diff --git a/binutils/doc/Makefile.in b/binutils/doc/Makefile.in
index 4351b67..f2d63c8 100644
--- a/binutils/doc/Makefile.in
+++ b/binutils/doc/Makefile.in
@@ -297,8 +297,6 @@ TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
 		    -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc
 
 MOSTLYCLEANFILES = $(DEMANGLER_NAME).1
-pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-html__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
 MAINTAINERCLEANFILES = binutils.info
 
 # Automake 1.9 will only build info files in the objdir if they are
@@ -604,6 +602,29 @@ install-dvi-am: $(DVIS)
 	done
 install-exec-am:
 
+install-html: install-html-am
+
+install-html-am: $(HTMLS)
+	@$(NORMAL_INSTALL)
+	test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
+	@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  $(am__strip_dir) \
+	  if test -d "$$d$$p"; then \
+	    echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
+	    $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
+	    echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
+	    $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
+	  else \
+	    list2="$$list2 $$d$$p"; \
+	  fi; \
+	done; \
+	test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
+	done; }
 install-info: install-info-am
 
 install-info-am: $(INFO_DEPS)
@@ -639,6 +660,19 @@ install-info-am: $(INFO_DEPS)
 	else : ; fi
 install-man: install-man1
 
+install-pdf: install-pdf-am
+
+install-pdf-am: $(PDFS)
+	@$(NORMAL_INSTALL)
+	test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
+	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
 install-ps: install-ps-am
 
 install-ps-am: $(PSS)
@@ -815,37 +849,6 @@ $(DEMANGLER_NAME).1: cxxfilt.man Makefile
 # cygnus option.
 install-data-local: install-info
 
-install-pdf: install-pdf-am
-
-install-pdf-am: $(PDFS)
-	@$(NORMAL_INSTALL)
-	test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
-	@list='$(PDFS)'; for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(pdf__strip_dir) \
-	  echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
-	  $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
-	done
-
-install-html: install-html-am
-
-install-html-am: $(HTMLS)
-	@$(NORMAL_INSTALL)
-	test -z "$(htmldir)" || $(mkdir_p) "$(DESTDIR)$(htmldir)"
-	@list='$(HTMLS)'; for p in $$list; do \
-	  if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
-	  f=$(html__strip_dir) \
-	  if test -d "$$d$$p"; then \
-	    echo " $(mkdir_p) '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(mkdir_p) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
-	    echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
-	  else \
-	    echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
-	    $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
-	  fi; \
-	done
-
 # Maintenance
 
 # We need it for the taz target in ../../Makefile.in.