Fix use of "command line X" in binutils doc

Binutils documentation uses a mix of spelling for the compound word
"command-line X". According to [1]:

"Sometimes compound words are written separately (nail polish),
sometimes with a hyphen (short-sighted) and sometimes as one word
(eyelashes). Often new compounds are written as two separate words and,
as they become more familiar, they are either connected with a hyphen
(-) or made into one word."

I think command-line X is common enough in our industry that the two
workds command and line should be connected. Since command-line is more
common than commandline, I propose to update binutils documentation to
consistently use "command-line" when this is used as an adjective to a
noun (eg. command-line argument, command-line switch, command-line
option and command-line flag). I've left occurences of "the command
line" as is. I've also left gdb, sim and readline alone and have only
touched public documentation (texi and NEWS files).

[1]
http://dictionary.cambridge.org/grammar/british-grammar/word-formation/compounds

2018-07-02  Thomas Preud'homme  <thomas.preudhomme@arm.com>

bfd/
	* doc/bfdint.texi: Use command-line consistently when used in a
	compount word.
	* doc/bfdsumm.texi: Likewise.

binutils/
	* NEWS: Use command-line consistently when used in a compount word.
	* doc/binutils.texi: Likewise and fix trailing whitespace on same
	line.

gas/
	* NEWS: Use command-line consistently when used in a compount word.
	* doc/as.texi: Likewise.
	* doc/c-aarch64.texi: Likewise.
	* doc/c-alpha.texi: Likewise.
	* doc/c-arc.texi: Likewise.
	* doc/c-arm.texi: Likewise.
	* doc/c-avr.texi: Likewise.
	* doc/c-bfin.texi: Likewise.
	* doc/c-cris.texi: Likewise.
	* doc/c-epiphany.texi: Likewise.
	* doc/c-i386.texi: Likewise.
	* doc/c-ia64.texi: Likewise.
	* doc/c-lm32.texi: Likewise.
	* doc/c-m32r.texi: Likewise.
	* doc/c-m68k.texi: Likewise.
	* doc/c-mips.texi: Likewise.
	* doc/c-mmix.texi: Likewise.
	* doc/c-msp430.texi: Likewise.
	* doc/c-mt.texi: Likewise.
	* doc/c-nios2.texi: Likewise.
	* doc/c-ppc.texi: Likewise.
	* doc/c-pru.texi: Likewise.
	* doc/c-rl78.texi: Likewise.
	* doc/c-rx.texi: Likewise.
	* doc/c-tic6x.texi: Likewise.
	* doc/c-v850.texi: Likewise.
	* doc/c-vax.texi: Likewise.
	* doc/c-visium.texi: Likewise.
	* doc/c-xstormy16.texi: Likewise.
	* doc/c-xtensa.texi: Likewise.
	* doc/c-z80.texi: Likewise.
	* doc/c-z8k.texi: Likewise.
	* doc/internals.texi: Likewise.

gprof/
	* gprof.texi: Use command-line consistently when used in a compount
	word.

ld/
	* NEWS: Use command-line consistently when used in a compount word.
	* ld.texinfo: Likewise.
	* ldint.texinfo: Likewise.

1 files changed, 17 insertions, 17 deletions

diff --git a/binutils/NEWS b/binutils/NEWS
index 6b29a8a..a3890ed 100644
--- a/binutils/NEWS
+++ b/binutils/NEWS
@@ -66,11 +66,11 @@ Changes in 2.28:
   require an ABI update, affecting other assemblers and linkers that
   create and process the relocations correctly.  It is recommended that
   all VLE object files be recompiled, but ld can modify the relocations
-  if --vle-reloc-fixup is passed to ld.  If the new ld command line
+  if --vle-reloc-fixup is passed to ld.  If the new ld command-line
   option is not used, ld will ld warn on finding relocations inconsistent
   with the instructions being relocated.
 
-* The nm program has a new command line option (--with-version-strings)
+* The nm program has a new command-line option (--with-version-strings)
   which will display a symbol's version information, if any, after the
   symbol's name.
 
@@ -130,7 +130,7 @@ Changes in 2.25:
 
 Changes in 2.24:
 
-* Objcopy now supports wildcard characters in command line options that take
+* Objcopy now supports wildcard characters in command-line options that take
   section names.
 
 * Add support for Altera Nios II.
@@ -173,10 +173,10 @@ changes in 2.21:
 * Add to dlltool .def file feature of aliasing PE internal symbol name by
   '== <ID>' option.
 
-* Add a new command line option -a / --addresses to addr2line to display the
+* Add a new command-line option -a / --addresses to addr2line to display the
   address before function name or source filename.
 
-* Add a new command line option -p / --pretty-print to addr2line to have
+* Add a new command-line option -p / --pretty-print to addr2line to have
   a more human readable output.
 
 * The hppa/som targets can now be compiled on any host.
@@ -189,14 +189,14 @@ Changes in 2.20:
   from the static delayimp library, which will import LoadLibraryA and
   GetProcAddress from kernel32.
 
-* Add a new command line option, --insn-width=WIDTH, to objdump to specify
+* Add a new command-line option, --insn-width=WIDTH, to objdump to specify
   number of bytes to be displayed on a single line when disassembling
   instructions.
 
 * Readelf can now display the relocated contents of a section as a sequence
-  of bytes via the --relocated-dump=<name|number> command line option.
+  of bytes via the --relocated-dump=<name|number> command-line option.
 
-* The gprof program has been given a new command line option:
+* The gprof program has been given a new command-line option:
   --external-symbols-table=<filename> which reads in symbols from a specified
   file.
 
@@ -207,7 +207,7 @@ Changes in 2.20:
   for objcopy.
 
 * Add --file-alignment, --heap, --image-base, --section-alignment,
-  --stack and --subsystem command line options to objcopy, which will
+  --stack and --subsystem command-line options to objcopy, which will
   set PE optional header.
 
 * Option --dwarf/-W of objdump is now as flexible as readelf --debug-dump/-w.
@@ -270,7 +270,7 @@ Changes in 2.18:
   re-compiled by windres without lossing resources or compilation errors.
   Some problems on dialog resource translations are corrected.
 
-* Add --extract-symbol command line option to objcopy, which will
+* Add --extract-symbol command-line option to objcopy, which will
   strip everything out of an ordinary object file or executable except
   for its symbol table.  Files containing just symbols can be useful
   to some OSes.
@@ -322,7 +322,7 @@ Changes in 2.16:
 
 * readelf can now display address ranges from .debug_range sections.  This
   happens automatically when a DW_AT_range attribute is encountered.  The
-  command line switch --debug-dump=Ranges (or -wR) can also be used to display
+  command-line switch --debug-dump=Ranges (or -wR) can also be used to display
   the contents of the .debug_range section.
 
 * nm and objdump now have a switch "--special-syms" to enable the displaying of
@@ -404,17 +404,17 @@ Changes in version 2.12:
 * readelf: Support added for DWARF 2.1 extensions.  Support added for
   displaying the contents of .debug.macinfo sections.
 
-* New command line switches added to objcopy to allow symbols to be kept as
+* New command-line switches added to objcopy to allow symbols to be kept as
   global symbols, and also to specify files containing lists of such symbols.
   by Honda Hiroki.
 
 * Support for OpenRISC by Johan Rydberg.
 
-* New command line switch to objcopy --alt-machine-code which creates a binary
+* New command-line switch to objcopy --alt-machine-code which creates a binary
   with an alternate machine code if one is defined in the architecture
   description.  Only supported for ELF targets.  By Alexandre Oliva.
 
-* New command line switch to objcopy -B (or --binary-architecture) which sets
+* New command-line switch to objcopy -B (or --binary-architecture) which sets
   the architecture of the output file to the given argument.  This option only
   makes sense, if the input target is binary.  Otherwise it is ignored.
   By Stefan Geuken.
@@ -426,7 +426,7 @@ Changes in binutils 2.11:
 * Add support for ARM v5t and v5te architectures and Intel's XScale ARM
   extenstions.
 
-* Add --srec-len and --srec-forceS3 command line switch to objcopy.
+* Add --srec-len and --srec-forceS3 command-line switch to objcopy.
   By Luciano Gemme.
 
 * Support for the MIPS32, by Anders Norlander.
@@ -439,11 +439,11 @@ Changes in binutils 2.10:
 
 * Support for 64-bit ELF on HPPA.
 
-* New command line switch to objdump --file-start-context which shows the
+* New command-line switch to objdump --file-start-context which shows the
   entire file contents up to the source line first encountered for a given
   file.
 
-* New command line switch to objdump -M (or --disassembler-options) which takes
+* New command-line switch to objdump -M (or --disassembler-options) which takes
   a parameter which can then be interpreted on a per-target basis by the
   disassembler.  Used by ARM targets to select register name sets, ISA, APCS or
   raw verions.