(enum bfd_reloc_code_real): Add some Alpha relocation types. Reorganized some

of the existing ones.

1 files changed, 71 insertions, 14 deletions

diff --git a/bfd/reloc.c b/bfd/reloc.c
index 20dd050..93fccdb 100644
--- a/bfd/reloc.c
+++ b/bfd/reloc.c
@@ -1032,6 +1032,7 @@ _bfd_relocate_contents (howto, input_bfd, relocation, location)
       bfd_vma check;
       bfd_signed_vma signed_check;
       bfd_vma add;
+      bfd_signed_vma signed_add;
 
       if (howto->rightshift == 0)
 	{
@@ -1056,18 +1057,24 @@ _bfd_relocate_contents (howto, input_bfd, relocation, location)
       /* Add in the value from the object file, shifted down so that
 	 it is a straight number.  */
       add = x & howto->src_mask;
+      if ((add & (((~ howto->src_mask) >> 1) & howto->src_mask)) == 0)
+	signed_add = add;
+      else
+	signed_add = add | ((bfd_vma) -1 &~ howto->src_mask);
       if (howto->bitpos == 0)
 	{
 	  check += add;
-	  signed_check += add;
+	  signed_check += signed_add;
 	}
       else
 	{
-	  add >>= howto->bitpos;
-	  check += add;
-	  signed_check += (add
-			   | ((bfd_vma) -1
-			      &~ ((bfd_vma) -1 >> howto->bitpos)));
+	  check += add >> howto->bitpos;
+	  if (signed_add >= 0)
+	    signed_check += signed_add >> howto->bitpos;
+	  else
+	    signed_check += ((signed_add >> howto->bitpos)
+			     | ((bfd_vma) -1
+				&~ ((bfd_vma) -1 >> howto->bitpos)));
 	}
 
       switch (howto->complain_on_overflow)
@@ -1184,6 +1191,7 @@ CODE_FRAGMENT
 .  BFD_RELOC_64,
 .  BFD_RELOC_32,
 .  BFD_RELOC_16,        
+.  BFD_RELOC_14,
 .  BFD_RELOC_8,
 .
 .  {* PC-relative relocations *}
@@ -1208,6 +1216,10 @@ CODE_FRAGMENT
 .  {* 32-bit pc-relative, shifted right 2 bits (i.e., 30-bit
 .     word displacement, e.g. for SPARC) *}
 .  BFD_RELOC_32_PCREL_S2,
+.  {* signed 16-bit pc-relative, shifted right 2 bits (e.g. for MIPS) *}
+.  BFD_RELOC_16_PCREL_S2,
+.  {* this is used on the Alpha *}
+.  BFD_RELOC_23_PCREL_S2,
 .
 .  {* High 22 bits of 32-bit value, placed into lower 22 bits of
 .     target word; simple reloc.  *}
@@ -1215,6 +1227,13 @@ CODE_FRAGMENT
 .  {* Low 10 bits.  *}
 .  BFD_RELOC_LO10,
 .
+.  {* For systems that allocate a Global Pointer register, these are
+.     displacements off that register.  These relocation types are
+.     handled specially, because the value the register will have is
+.     decided relatively late.  *}
+.  BFD_RELOC_GPREL16,
+.  BFD_RELOC_GPREL32,
+.
 .  {* Reloc types used for i960/b.out.  *}
 .  BFD_RELOC_I960_CALLJ,
 .
@@ -1256,13 +1275,50 @@ CODE_FRAGMENT
 .  BFD_RELOC_SPARC_LO7,
 .  {* end-sanitize-v9 *}
 .
+.  {* Alpha ECOFF relocations.  Some of these treat the symbol or "addend"
+.     in some special way.  *}
+.  {* For GPDISP_HI16 ("gpdisp") relocations, the symbol is ignored when
+.     writing; when reading, it will be the absolute section symbol.  The
+.     addend is the displacement in bytes of the "lda" instruction from
+.     the "ldah" instruction (which is at the address of this reloc).  *}
+.  BFD_RELOC_ALPHA_GPDISP_HI16,
+.  {* For GPDISP_LO16 ("ignore") relocations, the symbol is handled as
+.     with GPDISP_HI16 relocs.  The addend is ignored when writing the
+.     relocations out, and is filled in with the file's GP value on
+.     reading, for convenience.  *}
+.  BFD_RELOC_ALPHA_GPDISP_LO16,
+.
+.  {* The Alpha LITERAL/LITUSE relocs are produced by a symbol reference;
+.     the assembler turns it into a LDQ instruction to load the address of
+.     the symbol, and then fills in a register in the real instruction.
+.
+.     The LITERAL reloc, at the LDQ instruction, refers to the .lita
+.     section symbol.  The addend is ignored when writing, but is filled
+.     in with the file's GP value on reading, for convenience, as with the
+.     GPDISP_LO16 reloc.
+.
+.     The LITUSE reloc, on the instruction using the loaded address, gives
+.     information to the linker that it might be able to use to optimize
+.     away some literal section references.  The symbol is ignored (read
+.     as the absolute section symbol), and the "addend" indicates the type
+.     of instruction using the register:
+.              1 - "memory" fmt insn
+.              2 - byte-manipulation (byte offset reg)
+.              3 - jsr (target of branch)
+.
+.     The GNU linker currently doesn't do any of this optimizing.  *}
+.  BFD_RELOC_ALPHA_LITERAL,
+.  BFD_RELOC_ALPHA_LITUSE,
+.
+.  {* The HINT relocation indicates a value that should be filled into the
+.     "hint" field of a jmp/jsr/ret instruction, for possible branch-
+.     prediction logic which may be provided on some processors.  *}
+.  BFD_RELOC_ALPHA_HINT,
+.
 .  {* Bits 27..2 of the relocation address shifted right 2 bits;
 .     simple reloc otherwise.  *}
 .  BFD_RELOC_MIPS_JMP,
 .
-.  {* signed 16-bit pc-relative, shifted right 2 bits (e.g. for MIPS) *}
-.  BFD_RELOC_16_PCREL_S2,
-.
 .  {* High 16 bits of 32-bit value; simple reloc.  *}
 .  BFD_RELOC_HI16,
 .  {* High 16 bits of 32-bit value but the low 16 bits will be sign
@@ -1273,8 +1329,8 @@ CODE_FRAGMENT
 .  {* Low 16 bits.  *}
 .  BFD_RELOC_LO16,
 .
-.  {* 16 bit relocation relative to the global pointer.  *}
-.  BFD_RELOC_MIPS_GPREL,
+.  {* relocation relative to the global pointer.  *}
+.#define BFD_RELOC_MIPS_GPREL BFD_RELOC_GPREL16
 .
 .  {* Relocation against a MIPS literal section.  *}
 .  BFD_RELOC_MIPS_LITERAL,
@@ -1282,7 +1338,7 @@ CODE_FRAGMENT
 .  {* MIPS ELF relocations.  *}
 .  BFD_RELOC_MIPS_GOT16,
 .  BFD_RELOC_MIPS_CALL16,
-.  BFD_RELOC_MIPS_GPREL32,
+.#define BFD_RELOC_MIPS_GPREL32 BFD_RELOC_GPREL32
 .
 .  {* These are, so far, specific to HPPA processors.  I'm not sure that some
 .     don't duplicate other reloc types, such as BFD_RELOC_32 and _32_PCREL.
@@ -1483,6 +1539,7 @@ DESCRIPTION
 	don't do relaxing -- i.e., does nothing.
 */
 
+/*ARGSUSED*/
 boolean
 bfd_generic_relax_section (abfd, section, link_info, symbols)
      bfd *abfd;
@@ -1534,7 +1591,7 @@ bfd_generic_get_relocated_section_contents (abfd, link_info, link_order, data,
   /* read in the section */
   bfd_get_section_contents(input_bfd,
 			   input_section,
-			   data,
+			   (PTR) data,
 			   0,
 			   input_section->_raw_size);
   
@@ -1556,7 +1613,7 @@ bfd_generic_get_relocated_section_contents (abfd, link_info, link_order, data,
       bfd_reloc_status_type r=
        bfd_perform_relocation(input_bfd,
 			      *parent,
-			      data,
+			      (PTR) data,
 			      input_section,
 			      relocateable ? abfd : (bfd *) NULL,
 			      &error_message);